DVD RECEIVER WITH MONITOR
KW-AVX900
For canceling the display demonstration, see page 8.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
LVT1670-001A
[A]
Download from Www.Somanuals.com. All Manuals Search And Download.
How to reset your unit
Contents
• Your preset
adjustments will also
be erased.
INTRODUCTION
Playable disc type............................
4
5
6
How to forcibly eject a disc
Basic operations—
Monitor panel/touch panel............
ENTER
Basic operations—
Remote controller (RM-RK251) ......
NO EJECT?
EMERGENCY EJECT?
3
OPERATIONS
Before operating the unit ................
Common operations ........................
8
9
Exit
Back
2
Listening to the radio ...................... 10
Disc operations................................ 13
Dual Zone operations....................... 27
SD operations.................................. 30
USB operations................................ 32
Watching TV .................................... 34
at the same time
1
1
• If this does not work, reset the unit.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
EXTERNAL DEVICES
Bluetooth® operations—
Cellular phone/audio player .......... 37
Temperature inside the car...
Listening to the CD changer.............. 44
Listening to the iPod/D. Player ......... 46
Using other external components..... 48
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
SETTINGS
Sound equalization.......................... 51
Assigning titles to the sources .......... 52
Menu operations ............................. 53
REFERENCES
Maintenance ................................... 63
More about this unit ........................ 64
Troubleshooting.............................. 71
Specifications.................................. 76
3
Download from Www.Somanuals.com. All Manuals Search AndIDNoTwRnOloDadU. CTION
Playable disc type
Disc type
DVD
Recording format, file type, etc.
DVD Video (Region Code: 4)*1
Playable
DVD Audio
DVD-ROM
DVD Recordable/Rewritable
(DVD-R*2/-RW, +R/+RW*3)
• DVD Video: UDF bridge
• DVD-VR
• DivX/MPEG1/MPEG2/JPEG/MP3/
WMA/WAV/AAC: ISO 9660 level
1, level 2, Romeo, Joliet
DVD Video
DVD-VR (non-CPRM only)
DivX/MPEG1/MPEG2
JPEG
MP3/WMA/WAV/AAC*4
MPEG4
• DVD-RAM cannot be played.
DVD+VR
Dual Disc
CD/VCD
DVD side
Non-DVD side
Audio CD/CD Text (CD-DA)/DTS-CD
VCD (Video CD)
CD-ROM
CD-I (CD-I Ready)
CD Recordable/Rewritable
(CD-R/-RW)
• ISO 9660 level 1, level 2, Romeo,
Joliet
CD-DA
MP3/WMA/WAV/AAC*4
JPEG
DivX/MPEG1/MPEG2
MPEG4
1
*
*
*
If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the monitor.
DVD-R recorded in multi-border format is also playable (except for dual layer discs).
It is possible to play back finalized +R/+RW (Video format only) discs. However, the use of +R double layer disc is
not recommended.
2
3
4
*
This unit can play back AAC files encoded using iTunes.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore,
the use of Non-DVD side of a DualDisc on this product may not be recommended.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations — Monitor panel/touch panel
Display <AV Menu>.
• ꢀ page 53.
Display <Source Menu>.
• ꢀ pages 9 and 27.
Display and erase the Short Cut windows.
Available functions vary among the sources. For details, see each source
operation section.
Remote sensor
Adjust the volume.
Change the display information.
Change the sources.
• ꢀ page 9.
• Display the <Open/Tilt> screen
• Eject the disc and display the <Open/Tilt>
screen [Hold].
• Close the monitor panel when the <Open/Tilt>
screen is displayed.
Display <AV Menu>.
• ꢀ page 53.
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
• [OPEN]: Open the monitor panel.
• [EJECT]: Eject the disc.
• [CLOSE]: Close the monitor panel.
• [TILT +/–]: Tilt the monitor panel.
• [Exit]: Erase this screen.
Reset the unit.
• Use only when the internal system malfunctions.
• For details on the touch panel operations,
see each source operation sections.
• Shaded icons cannot be used at that time.
5
Download from Www.Somanuals.com. All Manuals Search AndIDNoTwRnOloDadU. CTION
Basic operations — Remote controller (RM-RK251)
Installing the battery
Main elements and features
R03/LR03/AAA
If the range or effectiveness of the remote controller
decreases, replace both batteries.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Caution:
• Do not expose batteries to heat or flame.
i
o
;
IMPORTANT:
If Dual Zone is activated (ꢀ page 27), the remote
controller functions only for operating the DVD/CD
player and the built-in TV.
a
s
1*1 • Turns on the power.
• Attenuates the sound if the power is on.
• Turns off the power if pressed and held (while
the power is on).
2*1 Selects the source.
3*1 • Displays <Dial Menu>.
• Displays <Redial> list if pressed and held.
•
Answers incoming calls.
4*1,2 Adjusts the volume level.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5*1,2 Selects surround mode.
w
TUNER: Selects the bands.
DISC/SD/USB: Stops play.
Bluetooth PHONE: Ends the call.
Bluetooth AUDIO: Plays/pauses.
• This button does not function as the BACK
button for this model.
6
• DVD/DivX 6: Shows the disc menu.
• VCD: Resumes PBC playback.
• DVD-VR: Shows the Original Program screen.
• Makes selection/settings.
7
• ~: Skips back or forward by 5 minutes for
DivX/MPEG1/MPEG2.
e*2 Adjusts the volume level through the 2nd AUDIO
OUT plug.
• DISC +/– buttons: Changes discs for “CD-CH.”
Shows the on-screen bar.
8
r*2 Activates or deactivates Dual Zone.
9*1 Changes the display information.
t*1,2 Selects the sound mode.
p
q
Display or erase <AV Menu>.
For disc/SD/USB operations:
• 6: Plays/pauses.
• 5 / ∞:
DVD: Selects the title/group.
DVD-VR: Selects the program/playlist.
SD/USB/other discs (except VCD/CD): Selects
the folders.
y
• DVD Video/DivX 6: Shows the disc menu.
• VCD: Resumes PBC playback.
• DVD-VR: Shows the Play List screen.
RETURN button
• For VCD: Returns to the PBC menu.
DISC/SD/USB: Switches number entry mode.
• Also functions as CLEAR button to erase the
misentry after entering the wrong number.
• Enter the numbers.
u
i
• 4 / ¢:
o
– Press briefly: reverse skip/forward skip.
– Press and hold: reverse search/forward
search.
• FM/AM/TV: Selects the preset station/channel
directly.
• CD changer: Selects the disc directly.
For FM/AM operations:
;*1 Changes the aspect ratio of the playback
• 5 / ∞: Selects the preset stations.
• 4 / ¢: Functions to search for stations.
– Press briefly: Auto Search
– Press and hold: Manual Search
For TV operations:
pictures.
a
s
Reverse search/forward search for disc/SD/USB
operations.
• DVD Video: Selects audio language (
subtitles ( ), angle ( ).
),
• 5 / ∞: Selects the preset stations.
• 4 / ¢: Functions to search for stations.
– Press briefly: Auto Search
– Press and hold: Manual Search
For Apple iPod/JVC D. player operations:
• ∞: Pauses/stops or resumes playback.
• 5: Enters the main menu (then 5 / ∞ /
4 / ¢ work as the menu selecting
buttons).*3
• 4 / ¢ (in menu selecting mode)
– Selects an item if pressed briefly. (Then,
press ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
For Bluetooth operations:
• DVD Audio: Selects audio stream (
).
• DVD-VR: Turn on/off subtitles ( ), and
selects audio channel (
)
• DivX: Selects audio language (
subtitles ( ).
• VCD: Selects audio channel (
),
).
1
*
If Dual Zone is activated, these buttons cannot be
used.
2
*
These buttons can be used only when the slide cover is
closed.
*3 5: Returns to the previous menu.
∞: Confirms the selection.
• 4 / ¢: reverse skip/forward skip (for
audio operation)
• 6: Answers incoming calls (for “Bluetooth
PHONE”), plays/pauses (for “Bluetooth
AUDIO”)
7
Download from Www.Somanuals.com. All Manuals Search AndIDNoTwRnOloDadU. CTION
Before operating the unit
Cancel the display demonstration and set the clock (ꢀ
pages 54 and 55 for details).
• Non-available items will be displayed being shaded
on the AV Menu screens.
@ Set the clock settings.
Moves to the preceding menu page
Indication language:
In this manual, English indications are used
for purpose of explanation. You can select the
indication language on the monitor. (ꢀ page 55)
Moves to the succeeding menu page
~ Turn on the power.
Ÿ Display <AV Menu>.
! Display the <Setup> menu.
¤ Finish the procedure.
⁄ Cancel the display demonstrations.
Select <Off>.
Return to the previous screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Common operations
Selecting the playback source
Changing the display
information
• Available display information varies among the
playback sources.
• Available sources depend on the external
components you have connected, media you have
attached, and the <Input> settings you have made
(ꢀ pages 58 and 59).
On the monitor panel only:
On the touch panel:
• Each time you press DISP, the display changes to
show the various information.
Ex. When the playback source is a DivX disc.
Playback picture screen
(only for video sources)
Source information screen
Exit
ꢀpage 27
On the monitor panel:
Preset station (service) list,
track (file) list, or phone
number list
Animation screen
TUNER = DISC (DVD/VCD/CD) = SD = USB =
CD-CH, iPod, D.PLAYER, or EXT-IN = Bluetooth
PHONE = Bluetooth AUDIO = TV = AV-IN =
(back to the beginning)
Navigation screen
(When <Navigation> is
selected for <AV Input>):
(ꢀpage 58).
• You cannot select these sources if they are not ready.
Back to the beginning
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Listening to the radio
Assigned station name (ꢀpage 52). If no name is assigned,
“No Name” appears.
Preset No.
Band
Sound mode
(ꢀpage 51)
ꢀpage 11, 51
Tuner indicators
:
Buttons on the
touch panel. In the
explanation, they
are indicated inside
ꢀpage 9
~ Press [SOURCE], then press [TUNER]. (ꢀpage 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [BAND].
[
].
! Press [4] or [¢] to search for a station—Auto Search.
• Manual Search: Hold either [4]or [¢] until “Manual Search” appears on the display, then press it
repeatedly.
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
3
When an FM stereo broadcast is
hard to receive
1
Press [AV MENU].
Reception improves, but stereo effect will be lost.
• The MONO indicator lights up.
• You can also use AV MENU on the monitor panel.
2
Press [Mode].
To restore stereo effect, select <Off>.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in to stations with
sufficient signal strength
This function works only for FM bands. Once you have
activated this function (selected <Local>), it always
works when searching for FM stations.
FM station automatic presetting
—SSM (Strong-station
Sequential Memory)
This function works only for FM bands.
You can preset six stations for each band.
1
Press [AV MENU].
1
Press [AV MENU].
• You can also use AV MENU on the monitor panel.
• You can also use AV MENU on the monitor panel.
2
Press [Mode].
2
Press [Mode].
3
3
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
• You can also change <IF Band Width> setting
(for details, ꢀpage 58).
<IF Band Width> menu can be accessed by
pressing [SHORT CUT] on the touch panel,
then...
ꢀpage 51
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Manual presetting
Selecting preset stations
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
On the remote:
1
1
Display the Preset List.
2
or
On the unit:
To select directly on the touch panel
2
3
Tune in to a station you want to preset.
To select from the Preset List
1
Select a preset number.
2
The station selected in step 2 is now stored in
preset number 4.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc operations
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the
disc.
If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do.
• In some cases, without showing “ ,” operations will not be accepted.
~ Open the monitor panel.
! Insert a disc.
Label side
<Open/Tilt> menu appears.
• Shaded icons cannot be used at that time.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
Monitor panel closes automatically.
If not, press [CLOSE].
Ÿ Press [OPEN].
Caution:
Do not place your finger behind the monitor panel.
Caution on volume setting:
• [OPEN]: Open the monitor panel.
• [EJECT]: Eject the disc.
• [CLOSE]: Close the monitor panel.
• [TILT +/–]: Tilt the monitor panel.
• [Exit]: Erase this screen.
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
While playing the following discs, press
.
• Each time you press the button, the display changes to show the different information (ꢀ page 9).
DVD Video: Title no./Chapter no./Playing time
DVD-VR: Program no. (or Playlist no.)/Chapter no./Play time
Disc type *1
Audio format
Playback mode
Sampling frequency/Bit
rate/Recorded signal
channel no.
Speaker/signal
indicators
Surround mode
(ꢀpage 24)
(ꢀpage 64)
ꢀpage 19
[3/ 8]
[7]
Start and pause playback
Stop playback
:
Buttons on the touch panel. In the explanation,
they are indicated inside [ ].
These buttons also work when they are not
shown on the touch panel (while watching
pictures on the screen).
[4¢] Press: Select chapter
Hold: Reverse/forward search*2
Select title/program/playlist
[5∞]
Group no./Track no./Playing time
Reproduced sound
indicator—
MULTI CH/LR ONLY
(ꢀpage 65)
BONUS indicator
(ꢀpage 23)
B.S.P indicator
(ꢀpage 23)
ꢀpage 19
[3/ 8]
[7]
Start and pause playback
Stop playback
[4¢] Press: Select track
Hold: Reverse/forward search*2
Select group
[5∞]
1
2
*
*
DVD-VR also indicates either PRG (program) or PLAY (playlist) playback.
Search speed: x2 ]x10.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
While playing the following discs, press
.
• Each time you press the button, the display changes to show the different information (ꢀ page 9).
For DivX/MPEG1/MPEG2: Folder no./Track no./Playing time
For JPEG: Folder no./Track no.
Disc type
Surround mode *3
(ꢀpage 24)
Total track no.
included in the
disc
ꢀpage 19
[3/ 8]
[7]
Start and pause playback
Stop playback
[4¢] Press: Select track
Hold: Reverse/forward search for DivX/MPEG1/MPEG2 *4
Press: Select folder
Hold: Display Folder list
[5∞]
Track no./Playing time
PBC indicator
lights up when PBC is
in use.
Total track no.
included in the disc
Total play time
ꢀpage 19
[3/ 8]
[7]
Start and pause playback
Stop playback
[4¢] Press: Select track
Hold: Reverse/forward search*2
2
3
4
*
*
*
Search speed: x2 ]x10.
Surround mode and sound mode cannot be used at the same time.
Search speed: ¡1 ]¡2.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Track no./Playing time
Only for CD Text *5
Total track no.
included in the disc
Sound mode *3
(ꢀpage 51)
Total play time
ꢀpage 19
Start and pause playback
Stop playback
[4¢] Press: Select track
Hold: Reverse/forward search*2
[3/ 8]
[7]
• While playing a DTS-CD
DTS indicator
Speaker/signal
indicators
(ꢀpage 64)
Folder no./Track no./Playing time
Audio format
(MP3/WMA/WAV/AAC)
Tag data appears
only when it is
recorded
Total track no. included in the disc
ꢀpage 19
[3/ 8]
[7]
Start and pause playback
Stop playback
[4¢] Press: Select track
Hold: Reverse/forward search*2
Press: Select folder
Hold: Display Folder list
[5∞]
2
5
*
*
Search speed: x2 ]x10.
“No Name” appears for conventional CDs.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation buttons on the monitor screen
You can display the following operation buttons while watching the playback pictures on the monitor.
• While the operation buttons are displayed, aspect ratio is fixed to <Full> (ꢀ page 55).
• If no operation is done for about 5 seconds, the operation buttons disappears (except when a disc menu is
displayed).
ꢀ pages 20 to 22 on how the operation buttons
particularly work for a variety of the discs
To erase the operations, touch the screen again.
A
[SOURCE] Display the <Source Menu>
[AV MENU] Display the <AV Menu>
[SHORT CUT] Display the Short Cut buttons
Touch the screen (center portion).
*
[3/ 8]
Start and pause playback
[7]
Stop playback
[4¢] Press: Select track
Hold: Reverse/forward search
Select folders
[5∞]
•
The above buttons also work when they are not shown on
the touch panel (while watching pictures on the screen).
Touch [KEY].
* While a disc menu is played back for DVD, [KEY] is
automatically displayed. On the disc menu, you can select a
menu item directly by touching it on the screen.
B
For DVD/VCD/DivX menu operation playback
[235∞] Select the menu items
[ENT]
[TOP MENU] Display the disc menu
[MENU] Display the disc menu
Confirm the selection
Touch [KEY].
[RETURN] Return to the previous menu or display the
menu (only for VCD with PBC)
C
For entering the numbers
[DIRECT CLR] Switch between chapter/track entry and
title/group/folder entry
Erase the last entry when you enter a wrong
number
[0]–[9]=[ENT] Enter the number
Ex. To enter “105”: press [1], [0], [5], then [ENT]
Touch [KEY].
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Selecting playback modes
You can use only one of the following playback modes—Intro/Repeat/Random.
Ex. To select Track Repeat
1
3
• You can also use AV MENU on the monitor panel.
2
When one of the playback modes is selected, the
corresponding indicator lights up on the source
information screen.
To cancel, select <Off>.
Disc type
Intro
Repeat
Random
Chapter: Repeats current
—
chapter
—
Title: Repeats current title
—
—
Track: Repeats current track
—
—
Chapter: Repeats current
chapter
Program: Repeats current
program (not available for
Playlist playback).
Track: Plays the first 15
seconds of each track (for
VCD: PBC not in use)
Track: Repeats current track*1 Disc (All): Randomly plays all
(for VCD: PBC not in use)
tracks (for VCD: PBC not
in use)
Track: Plays the first 15
seconds of each track
Folder: Plays the first 15
seconds of the first track of
each folder
Track: Repeats current track*1 Folder: Randomly plays all
Folder: Repeats all tracks of
tracks of current folder,
then tracks of next folders
Disc (All): Randomly plays all
tracks
the current folder
Track: Repeats current track
Folder: Repeats current folder
—
—
—
Folder: Repeats current folder
—
1
*
You can also use [SHORT CUT] to turn on and off Track Repeat
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting tracks on the list
If a disc includes folders, you can display the Folder/
Track (File) Lists, then start playback.
Prohibiting disc ejection
You can lock a disc in the loading slot.
1
• You can also use AV MENU on the monitor panel.
2
at the same time
To cancel the prohibition, repeat the same
procedure to select <EJECT OK?>.
3
Select a folder (1), then a track (2).
Using Short Cut Icons
You can easily access the some frequently used
functions by using [SHORT CUT] on the touch panel.
1
Selected track starts playing. (* Press to move to
the previous/next pages of the list)
1 Current folder list number/total folder list
number
2 Current track list number/total track list
number of the current folder
2
• For video software:
Aspect ratio
(ꢀpage 55)
Surround
(ꢀpage 24)
Sound mode
(ꢀpage 51)
• Track List can also be accessed by pressing DISP
on the monitor panel.
• For audio software:
Turn on or off Track Repeat
(Repeat play: ꢀpage 18)
Selected track starts playing.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Operations using the remote controller—RM-RK251
:
Stop playback.
:
Start playback/pause (if pressed during playback).
:
Reverse/forward search*2. (No sound can be heard.)
(Slow motion*3 during pause. No sound can be heard.)
:
Press: Select chapter (during playback or pause).
Hold: Reverse/forward search*4.
:
Select title (during playback or pause).
Using menu driven
features
=
=
:
Select chapter.
Select title (when not playing).
(twice) =
Select title (during playback or pause).
1
2 Select an item you want
=
:
to start play.
:
:
:
:
Select aspect ratio.
3
Select audio language.
Select subtitle language.
Select view angle.
1
*
:
Stop playback.
:
:
Start playback/pause (if pressed during playback).
Reverse/forward search*2.
:
:
Press: Select track.
Hold: Reverse/forward search*4.
1
2
3
*
*
*
Erases the misentry of the
number.
Select group.
Search speed: x2 ]x5 ]
x10 ]x20 ]x60
Slow motion speed: 1/32 ]
1/16 ]1/8 ]1/4 ]1/2
Search speed: x2 ]x10
Search speed: ¡1 ]
¡2 ]¡3
Using menu driven
features
=
=
:
Select track.
4
5
*
*
1
2 Select an item you want
(twice) =
=
:
Select group.
to start play.
:
:
Select aspect ratio.
Select audio stream.
6
*
Search speed: ¡1 ]
¡2
3
20
Download from Www.Somanuals.com. All Manuals Search And Download.
:
Stop playback.
:
:
Start playback/pause (if pressed during playback).
: Reverse/forward search*5. (No sound can be heard.)
: Press: Select track.
Hold: Reverse/forward search*6. (No sound can be heard.)
Select folder.
: Select aspect ratio.
: Select audio language. (DivX only)
: Select subtitle language. (DivX only)
=
=
:
Select track (within the same folder).
(twice) =
Select folder.
=
:
While playing...
Back/advance the scenes by 5 minutes.
For DivX6: Using menu driven features
Current playback position
1
2 Select an item you want to start play.
2nd press
3rd press
1st press
2nd press
1st press
3
:
Stop playback.
:
Turn on/off subtitle.
:
Start playback/pause (if pressed during
playback).
=
=
:
: Reverse/forward search*2. (No sound
can be heard.)
Select chapter.
Select program (when not playing).
(twice) =
(Slow motion*3 during pause. No sound
can be heard.)
=
:
Select program/playlist (during playback or
pause).
• Reverse slow motion does not work.
: Press: Select chapter (during playback or
pause).
Hold: Reverse/forward search*4.
Using Original Program/Play List screens
( ꢀpage 23)
1
: For Original Program
: For Play List
:
Select program.
Select playlist (during playback or
pause).
2 Select an item you want to start playing.
:
:
Select aspect ratio.
Select audio channel (ST: stereo, L: left,
R: Right).
3
To erase the screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
:
Stop playback.
:
Stop playback.
:
Start playback/pause (if
pressed during playback).
:
Start playback. (Slide show: each file is
shown for a few seconds.)
Shows the current file until you change it
if pressed during Slide show.
: Reverse/forward search*2.
:
Press: Select track.
Hold: Reverse/forward search*4.
:Select track.
:
:
Select folder.
:
Select folder.
Select aspect ratio.
=
=
:
=
=
:
Select track (within the same folder).
Select track (within the same folder).
(twice) =
Select folder.
(twice) =
Select folder.
=
:
=
:
=
=
:
:
Stop playback.
Select track.
:
Start playback/pause (if pressed during
playback).
During PBC playback...
: Reverse/forward search*2.
=
=
:
(Forward slow motion*3 during pause. No
sound can be heard.)
Select an item on the menu.
To return to the previous menu, press
.
• Reverse slow motion does not work.
:Press: Select track.
Hold: Reverse/forward search*4 (No
sound can be heard.)
To cancel PBC playback
1
:
:
Select aspect ratio.
Select audio channel (ST: stereo, L: left, R:
Right).
2 Start the desired track.
=
=
• To resume PBC, press
/
.
2
*
*
Search speed: x2 ]x5 ]x10 ]x20 ]x60
Slow motion speed: 1/32 ]1/16 ]1/8 ]
1/4 ]1/2
3
:
Stop playback.
4
:
Start playback/pause (if pressed during playback).
: Reverse/forward search*2.
*
Search speed: x2 ]x10
:
Press: Select track.
Hold: Reverse/forward search*4.
=
=
:
Select track.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back a bonus group
Using the list screens
If a DVD Audio including a “bonus group” is
detected, the BONUS indicator lights up on the source
information screen.
You can use Original Program and Play List screen
anytime while playing DVD-VR with its data recorded.
1
Display the Original Program/Play List
screen.
To play a bonus group...
1
Select the bonus group.
• The bonus group is usually recorded as the last
group.
2
Enter the key number.
:
Move the entry position
Select a number
:
• “key number” (a kind of password) for the bonus
group is not open to public. The way of getting
the key number depends on the disc.
3
Follow the interactive instructions shown on
the monitor.
2
Select an item you want.
To erase the screen
Selecting browsable still picture
1 Program/Play list number
2 Recording date
3 Recording source (TV station, the input terminal of
the recording equipment, etc.)
When a disc including browsable still pictures is
detected, the B.S.P indicator lights up on the source
information screen.
4 Start time of recording
When disc shows the BSP selecting icons such as @ or
# on the screen...
5 Title of the program/play list*
6 Highlight bar (current selection)
7 Creating date of play lists
1
Select an item you want to display.
8 Total number of chapters included in the playlist
9 Playback time
* The title of the original program or play list may not be
displayed depending on the recording equipment.
2
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
4
Enjoying surround sounds
You can enjoy multi-channel surround playback
through the front, center, surround speakers.
• After connecting the center speaker, make
sure to activate the center speaker; otherwise,
no sound comes out of the center speaker (ꢀ
page 57).
• Surround mode can also be used for “USB” and “SD.”
MULTI: For multi-channel encoded sources such as
Dolby Digital*1, DTS*2, and DVD Audio. (When
activated, “MULTI” is shown on the source
information screen.)
Dolby Pro Logic II (Movie/Music): For 2 channel
sources except for DivX/MPEG1/MPEG2 discs.
• Auto: When multi-channel digital signals come
in, “MULTI” surround is activated.
When 2-channel or 2.1-channel signals come in,
“4CH STEREO” is activated.
To turn on the surround...
1
• Through: All incoming channel signals are sent
to the corresponding speakers.
• Dolby PL II Movie: Activates Dolby Pro Logic II
Movie.
• You can also use AV MENU on the monitor panel.
• Dolby PL II Music: Activates Dolby Pro Logic
II Music. You can adjust <Panorama> and
<Center Width> setting (ꢀbelow).
2
Only when selecting <Dolby PL II Music>
After step 4 above...
1
Activate <Panorama>.
3
• Panorama: Select <On> to add wraparound
sound effect.
• Off: Deactivates surround.
• On: Activates surround = go to the following
steps.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Adjust <Center Width>.
Operations using the on-screen
bar
These operations are possible on the monitor using
the remote controller, while playing the following
discs—DVD/VCD/DivX/MPEG1/MPEG2/JPEG.
1
Display the on-screen bar. (ꢀpage 26)
• Center Width: Adjust the center image so it
may be heard only from the center speaker,
only form the left/right front speaker as a
“phantom” center image, or various combination
of these speakers. As the number increases, the
“phantom” effect becomes stronger (normally
select <04>).
2
3
Select an item.
Make a selection.
If a pop-up menu appears...
• For entering time/numbers...
On the remote controller:
:
Move the entry position
: Select a number
• You cannot change the <Dolby PL II Music>
settings using the remote controller.
To remove the on-screen bar
1
*
*
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
2
Continued on the next page
25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
On-screen bar
Information
Operation
Above example is of DVD Video. Items shown on the bar vary due to the disc type.
1 Disc type
5 Time indication
Elapsed playing time of the disc
2 • DVD: Audio signal format
• VCD: PBC
3 Playback mode *1
DVD Video:
Remaining title time (for DVD)
Remaining disc time (for others)
Elapsed playing time of the current
chapter/track *2
Remaining time of the current
chapter/track *2
T. RPT:
C. RPT:
DVD Audio:
T. RPT:
DVD-VR:
C. RPT:
Title repeat
Chapter repeat
Track repeat
6 Playback status
Play
Chapter repeat
Reverse/forward search
PG. RPT: Program repeat
DivX/MPEG1/MPEG2:
T. RPT: Track repeat
Reverse/forward slow-motion
Pause
Stop
F. RPT:
F. RPT:
T. RPT:
Folder repeat
Folder repeat
Track repeat
7 Operation icons
JPEG:
VCD:
Change time indication (see 5)
Time Search (Specify a certain scene
by entering time.)
Title Search (by its number)
Chapter Search (by its number)
Group Search (by its number)
Track Search (by its number)
Repeat play *1
Intro play *1
Random play *1
A. RND: All (Disc) random
T. INT: Track intro
4 Playback information
Current title/chapter
Current group/track
Current program/chapter
Change the audio language, audio
stream, or audio channel
Change or erase the subtitle language
Change the view angle
Current playlist/chapter
Current track
Current folder/track
Current folder/file
Change the browsable still pictures
(pages). The numbers in the indicator
shows the current page/total page
number
*1 ꢀpage 18
2
*
Not applicable for DVD-VR
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Zone operations
You can enjoy a disc playback or watch the TV on the
external monitor connected to the VIDEO OUT and 2nd
AUDIO OUT plugs, while listening to any other source
than “SD” and “USB” through the speakers.
• When Dual Zone is in use, you can only operate the
DVD/CD player and the built-in TV using the remote
controller.
To select a different source (main source) to
listen through the speakers:
Press SOURCE on the monitor panel.
• You cannot select “SD” and “USB” for the main
source.
• By using the buttons on the monitor panel, you
can operate the newly selected main source without
affecting Dual Zone (DISC/TV) operations.
1
On the remote controller:
1
•
When the main source is “SD” or “USB,” the DUAL
button does not work.
2
2 Adjust the volume through the 2nd AUDIO
OUT plug.
When the main source is “SD” or “USB,” only “OFF” is
displayed.
3 Operate the DVD/CD player or select the TV
channels.
• For remote control operations, pages 6 and 7.
• OFF: Deactivates Dual Zone.
• DISC: Activates Dual Zone without applying
Headphone Surround*.
• DISC SURROUND: Activates Dual Zone and
applies Headphone Surround*.
• TV: You can watch the TV programs.
* JVC original headphone virtual surround system. This
surround will also work for the main source “DISC” if
“DISC SURROUND” is selected as the sub-source. This
surround does not work for DivX/MPEG1/MPEG2 discs.
Ex. When [DISC SURROUND] is selected.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
To select a folder or track
Operations using the control
screen—DVD/CD player only
1
Select “Folder” column or “Track” column on
the control screen.
For discs except DVD and VCD:
While Dual Zone is on, these operations are possible on
the external monitor using the remote controller.
The control screen automatically appears when you
insert a disc. (For DivX/MPEG1/MPEG2/JPEG; while not
playing.)
2
Select a folder or track.
• If necessary, press ENT to start playback.
• When Dual Zone is off, you can only watch the control
screen, but cannot operate it.
Ex.: CD Text
Ex.: MP3/WMA
1 Playback mode selection window: appears when
OSD is pressed (ꢀ page 29).
2 Selected playback mode (ꢀ page 29)
3 Elapsed playing time of the current track
4 Operation status
1 Current folder (highlighted bar)
2 Current folder number/total folder number
3 Folder list
4 Selected playback mode (ꢀ page 29)
5 Elapsed playing time of the current track (not
displayed for JPEG)
5 Current track number/total number of tracks on the
disc
6 Operation status
6 Track information
7 Current track number/total number of tracks in the
current folder (total number of tracks on the disc)
8 Track information (only for MP3/WMA/WAV/AAC)
9 Track list
p Current track (highlighted)
* If tag data includes “Jacket Picture” (baseline JPEG), it
will be displayed.
7 Track list
8 Current track (highlighted bar)
To select a track
• If necessary, press ENT to start playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the playback modes
You can also change the playback modes.
• For CD/MP3/WMA/WAV/AAC: Intro/Repeat/Random
• For DivX/MPEG1/MPEG2/JPEG: Repeat
Operations using the list
screen
For discs except DVD, VCD, and CD:
While Dual Zone is on, these operations are possible on
the external monitor using the remote controller.
1
1
After stopping playback, display the list
screen.
or
2
Only for CD/MP3/WMA/WAV/AAC: Select a
playback mode.
2
Select a folder on the list.
3
4
Select your desired option.
Selectable playback mode
CD: T. RPT: Track repeat
A. RND: All random
T. INT: Track intro
MP3/WMA/WAV/AAC:
3
Select a track on the list.
T. RPT:
F. RPT:
F. RND: Folder random
A. RND: All random
T. INT:
F. INT:
Track repeat
Folder repeat
• To go back to the folder list, press
.
1 Current folder number/total folder number
2 Current track number/total number of tracks in the
current folder
3 Current page/total number of the pages included
in the list
Track intro
Folder intro
DivX/MPEG1/MPEG2:
T. RPT:
F. RPT:
Track repeat
Folder repeat
Folder repeat
4 Current folder/track (highlighted bar)
JPEG:
F. RPT:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
SD operations
This unit can play the JPEG/MP3/WMA/WAV/AAC*1
files stored in SD card.
! Insert a SD card.
• You can operate the SD card in the same way you
operate the files on discs (except OSD operation and
those on the external monitor). (ꢀ page 15 to 25)
• All tracks in the SD card will be played repeatedly
until you change the source.
• You cannot select “SD” when Dual Zone is in use.
• Make sure all important data has been backed up.
~ Open the monitor panel.
Push in the SD card until you hear a clicking sound.
The source changes to “SD” and playback starts.
<Open/Tilt> menu appears.
• Shaded icons cannot be used at that time.
⁄ Close the monitor panel.
• If <Open/Tilt> menu is still displayed.
You can also press
[CLOSE] on the <Open/
Tilt> menu.
Ÿ Press [OPEN].
• If <Open/Tilt> menu is not displayed.
Caution:
1
*
This unit can play back AAC files encoded using
iTunes. This unit cannot play back AAC files purchased
from the iTunes Store.
Do not place your finger behind the monitor panel.
Caution:
To eject the SD card
Push in the SD card lightly.
• Do not release your finger quickly; otherwise, the
SD card may pop up out from the loading slot.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting playback modes
You can use only one of the following playback
modes—Intro/Repeat/Random.
Ex. To select Track Repeat
3
1
• You can also use AV MENU on the monitor panel.
When one of the playback modes is selected, the
corresponding indicator lights up on the source
information screen.
2
To cancel, select <Off>.
File type
Intro
Repeat
Random
Track: Plays the first 15
seconds of each track
Folder: Plays the first 15
seconds of the first track of
each folder
Track: Repeats current track *1 Folder: Randomly plays all
Folder: Repeats all tracks of
tracks of current folder,
then tracks of next folders
SD (All): Randomly plays all
tracks
the current folder
Folder: Repeats current folder
—
—
1
*
You can also use [SHORT CUT] to turn on and off Track Repeat.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
USB operations
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *1, portable HDD, etc.
to the unit.
USB cable from the rear of the unit
~
•
You cannot connect a computer to the USB (
) terminal of the unit.
Ÿ Press [SOURCE], then press [USB]. (ꢀpage 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
This unit can play the DivX/JPEG/MPEG1/MPEG2*2/
MP3/WMA/WAV/AAC*3 files stored in USB mass
Caution:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while “Now Reading...” is flashing on
the monitor screen.
• Do not start the car engine if a USB device is
connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
storage class device.
• You can operate the USB device in the same way you
operate the files on discs (except OSD operation and
those on the external monitor). (ꢀ page 15 to 25)
• All tracks in the USB device will be played repeatedly
until you change the source.
• You cannot select “USB” when Dual Zone is in use.
• Make sure all important data has been backed up.
1
*
*
Except for JVC D. Player XA-HD500.
2
3
Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).
This unit can play back AAC files encoded using
iTunes. This unit cannot play back AAC files purchased
from the iTunes Store.
*
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting playback modes
You can use only one of the following playback
modes—Intro/Repeat/Random.
Ex. To select Track Repeat
3
1
• You can also use AV MENU on the monitor panel.
2
When one of the playback modes is selected, the
corresponding indicator lights up on the source
information screen.
To cancel, select <Off>.
File type
Intro
Repeat
Random
Track: Plays the first 15
seconds of each track
Folder: Plays the first 15
seconds of the first track of
each folder
Track: Repeats current track *1 Folder: Randomly plays all
Folder: Repeats all tracks of
tracks of current folder,
then tracks of next folders
USB (All): Randomly plays all
tracks
the current folder
Track: Repeats current track
Folder: Repeats current folder
—
—
—
—
Folder: Repeats current folder
1
*
You can also use [SHORT CUT] to turn on and off Track Repeat.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Watching TV
Assigned name (ꢀpage 52). “No Name” appears if not assigned.
Preset No.
Sound mode
ꢀpage 51
ꢀpage 36
:
Buttons on the
touch panel. In the
explanation, they are
indicated inside [ ].
ꢀpage 9
ꢀpage 5
Preparation:
Make sure <TV Channel Area> is set correctly. (ꢀ page 58)
~ Press [SOURCE], then press [TV]. (ꢀpage 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [4] or [¢] to search for a station—Auto Search.
• Manual Search: Hold either [4]or [¢] until “Manual Search” appears on the display, then press it
repeatedly.
3
Automatic TV station
presetting
You can preset 12 TV stations.
1
Press [AV MENU].
Local TV stations with the strongest signals are
searched and stored automatically.
2
Press [Mode].
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual presetting
Ex.: Storing TV station, 4 ch into preset number 4.
Selecting preset stations
On the remote:
1
Display the Preset List.
1
or
On the unit:
To select directly on the touch panel
2
3
Tune in to a station you want to preset.
To select from the Preset List
1
Select a preset number.
2
• By pressing [PRESET 1-6 Ô 7-12], you can
move to the other preset list of the other six
preset stations.
• By pressing [PRESET 1-6 Ô 7-12], you can
move to the other preset list of the other six
preset stations.
The station selected in step 2 is now stored in
preset number 4.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Using Short Cut Icons
Changing on-screen
information
You can easily access to the some frequently used
functions by using [SHORT CUT] on the touch panel.
You can display channel number and assigned name of
the station while watching TV.
1
2
1
2
3
Press [AV MENU].
Press [MODE].
Sound mode
Aspect ratio
(ꢀpage 51)
(ꢀpage 55)
On-screen information
(ꢀleft)
To display the operation buttons
while watching TV
Touch the screen
(center portion).
• Off: No information will be displayed while
watching TV.
• Channel: Channel number will be displayed
while watching TV.
• Channel-Station: Channel number and
assigned name of the received station will be
displayed while watching TV.
[SOURCE] Display the <Source Menu>
[AV MENU] Display the <AV Menu>
[
SHORT CUT] Display the Short Cut buttons
[4 ¢] Select TV station
[5 ∞]
[KEY]
Select preset TV station
Does not work for “TV”
• If no operations are done for about 5 seconds, the
operation buttons disappear.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth® operations — Cellular phone/audio player
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer jack
on the rear.
• Refer also to the instructions supplied with the
Bluetooth Adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
To register using <Open>
Preparation: Operate the device to turn on its
Bluetooth function.
1
• You can also use AV MENU on the monitor panel.
• Make sure “New Device” is selected. If not, press
[5] or [∞] to select it.
To use a Bluetooth device through the unit (“Bluetooth
PHONE” and “Bluetooth AUDIO”) for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
2
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source (“Bluetooth PHONE” and “Bluetooth AUDIO”).
3
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the <Bluetooth>
menu to register and establish the connection with a
device.
• Select “Bluetooth PHONE” or “Bluetooth AUDIO” as
the source to operate the <Bluetooth> menu.
Go to other menu items
4
Enter a PIN (Personal Identification
Number)* code to the unit.
• You can enter any number you like (1-digit to
16-digit number).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
Menu item To do
Open
Make the unit ready to establish
a new Bluetooth connection.
Connection is established by
operating the Bluetooth device.
Search
Make the unit ready to establish
a new Bluetooth connection.
Connection is established by
operating this unit.
Continued on the next page
37
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
You can enter [0] – [9] only.
• [BS]: Erases the previous character before the
cursor.
• [Del]: Erases the character on the cursor.
• [Enter]: Confirms the entry.
To connect a special device <Special
Device>
1
Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
2
3
Press [Bluetooth].
5
Use the Bluetooth device to connect, while
“Open...” is displayed on the screen.
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Press [Special Device].
The unit displays the list of the preset devices.
4
5
Select a device you want to connect.
Use <Open> (or <Search>) to connect.
Now connection is established and you can use
the device through the unit.
To connect/disconnect a registered
device
The device remains registered even after you
disconnect the device. Use <Connect> (or activate
<Auto Connect>) to connect the same device
from next time. (ꢀthe following, and page 62).
1
Select “Bluetooth PHONE” or “Bluetooth
AUDIO,” then select a registered device you
want to connect/disconnect.
2
Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
To register using <Search>
1
Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
3
4
Press [Bluetooth].
• Make sure “New Device” is selected. If not, press
[5] or [∞] to select it.
Press [Connect] or [Disconnect].
• Select <Connect> to connect the selected
device.
• Select <Disconnect> to disconnect the selected
device.
2
3
Press [Bluetooth].
Press [Search].
The unit searches for available devices and displays
the list of them. (If no available device is detected,
“Device Unfound” appears.)
To delete a registered device
1
Select “Bluetooth PHONE” or “Bluetooth
AUDIO,” then select a registered device you
want to delete.
4
5
Select a device you want to connect.
Enter the specific PIN code of the device.
• Refer to the instructions supplied with the device
to check the PIN code.
2
Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
6
Use the Bluetooth device to connect, while
“Connecting...” is displayed on the screen.
3
4
Press [Bluetooth].
Press [Delete Pair].
Confirmation screen appears. Press [Yes].
Now connection is established and you can use
the device through the unit.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bluetooth cellular phone
Sound mode
(ꢀpage 51)
1
*
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
Bluetooth icon
lights up when
the adapter is
connected.
Adjust the volume of the incoming calls*2
ꢀpage 41
:
Buttons on the touch panel. In the
explanation, they are indicated inside
[
AV MENU] Hold: Activates <Voice Dialing>
[5∞] Select the registered device
(“New Device” appears when a new device can be
registered.)
[
].
1
2
*
*
When a cellular phone with audio function is connected, appears.
This adjustment does not affect the volume level of the other sources.
~ Press [SOURCE], then press [Bluetooth PHONE]. (ꢀpage 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [AV Menu].
• You can also use AV MENU on the monitor panel.
! Press [Bluetooth].
⁄ Establish the connection with a device, then make a call (or settings using the
<Bluetooth> menu).
ꢀpages 61 and 62
When <Auto Answer> is deactivated...
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
When a call comes in...
The source is changed to “Bluetooth PHONE”
automatically.
• Press the message displayed on the touch panel.
To end the call
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming calls automatically. (ꢀ
page 62)
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. (ꢀpage 62)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
When an SMS comes in...
3
4
If the cellular phone is compatible with SMS (Short
Message Service), you can read the messages on the
monitor.
• You cannot edit or send a message through the unit.
When <Message Info> is set to <Auto>...
The unit rings and the following screen is displayed on
the monitor to inform you of the arrival of the message.
(ꢀpage 62)
Select a calling method, then call.
To read the message, press [Yes].
The source is changed to “Bluetooth PHONE.”
To read the message later, press [No].
• The message is stored into <Message> =
<Unread>. (ꢀpage 61)
Cancel
When <Message Info> is set to <Manual>...
Access the message list to read a message. (ꢀpage 62)
• Redial: Shows the list of the phone numbers
you have dialed.
• Received Calls: Shows the list of the received
calls.
• Phonebook: Shows the phone book of the
connected cellular phone.
• Missed Calls: Shows the list of the missed calls.
• Phone number: Shows the phone number
entry screen = “How to enter phone number”
(ꢀpage 41).
• Voice Dialing: (Only when the connected
cellular phone has the voice recognition system):
= Speak the name you want to call.
To make a call
1
• You can also use AV MENU on the monitor panel.
2
To stop ringing (canceling the outgoing call)
Hold any button on the monitor panel (except
or +/–).
/ATT
40
Download from Www.Somanuals.com. All Manuals Search And Download.
How to enter phone number
To redial the dialed numbers
• You cannot use the remote controller to enter phone
numbers.
1
2
3
You can enter [0] – [9], [*], [#] (up to 32 numbers)
• [BS]: Erases the previous character before the cursor.
• [Del]: Erases the character on the cursor.
• [Preset]: Goes to Preset List. You can preset the
entered number by selecting preset number (ꢀ
page 42)
• [Dial]: Calls the entered number.
• You can easily access <Dial Menu> by pressing
[SHORT CUT] on the touch panel, then...
You can also access <Dial Menu> by holding
SOURCE on the monitor panel.
When using the remote controller, you can
display <Redial> list anytime (except when Dual
Zone is in use).
• You can easily activate <Voice Dialing> by
pressing [SHORT CUT] on the touch panel,
then...
You can also activate <Voice Dialing> by
holding [AV MENU].
41
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
To call a preset number
Presetting the phone numbers
You can preset up to six phone numbers.
1
1
Select the phone number you want to preset
from <Phonebook>, <Redial>, <Received
Calls>, or <Missed Calls>.
1 Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
2 Press [Bluetooth].
3 Press [Dial Menu], then...
2
Ex.: Selecting <Received Calls>
2
3
Select a telephone number to store.
You can use the following buttons on the remote
controller for the Bluetooth phone operations.
Select a preset number.
•
•
Displays <Dial Menu>/Answer
the incoming call.
Displays <Redial> list if pressed
and held (regardless of the current
source).
:
:
End the call.
Now “Tom” is stored into preset no. 1.
Adjust the volume.
:
Make a call to the preset
numbers.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bluetooth audio player
1
*
2
*
Sound mode
(ꢀpage 51)
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
Bluetooth icon
lights up when
the adapter is
connected.
ꢀpage 51
[3/ 8] [7] Start and pause playback
[4¢] Reverse/forward search
:
Buttons on the touch panel. In the
explanation, they are indicated inside
[5∞]
Select the registered device
[
].
(“New Device” appears when a new device can be
registered.)*3
1
2
3
*
*
*
When a cellular phone with audio function is connected, appears.
Indicates the button pressed. It may be different from the operation status.
You cannot select “New Device” when a Bluetooth audio player is connected.
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
~ Press [SOURCE], then press [Bluetooth
AUDIO]. (ꢀpage 9)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
: Start and pause playback.
: Reverse/forward skip.
: Adjust the volume.
Ÿ Start playback.
• See page 37 for connecting a new device.
• See pages 38 for connecting/disconnecting a
registered device.
• See page 38 for deleting a registered device.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit our JVC web site.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
Listening to the CD changer
Ex. while playing an MP3 disc
MP3 indicator
Folder no./Track no./Play time
Disc no.
Tag data appears only when it is
recorded.
Sound mode
(ꢀpage 51)
Total track no. included in the
disc
ꢀpage 45
[4¢] Press: Select track
Hold: Reverse/forward search
:
Buttons on the touch panel.
In the explanation, they are
indicated inside [ ].
[5∞]
Press: Select folders (only for MP3)
Hold: Display Disc list
It is recommended to use a JVC MP3-compatible CD
changer with your unit.
• You can play only CDs (CD-DA) and MP3 discs.
⁄ Select a disc to start playing.
Preparation:
Make sure <Changer> is selected for <External
Input>. (ꢀpage 59)
~ Press [SOURCE], then press [CD-CH]. (ꢀ
page 9)
To go to the other list
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
• If you select an MP3 disc, the Track list of the
current folder appears. You can select a track
and start playing. (ꢀalso page 19)
Ÿ
• You can also use AV MENU on the monitor panel.
! Display the Disc List.
• If you select a folder on the list, you can start
playing the first track of the folder.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting playback modes
You can use only one of the following playback
modes—Intro/Repeat/Random.
Ex. To select Track Repeat for an MP3 disc (for CDs, ꢀ
page 18.)
1
Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
2
3
Press [Mode].
When one of the playback modes is selected, the
corresponding indicator lights up on the source
information screen.
To cancel, select <Off>.
Disc type
Intro
Repeat
Random
Track: Plays the first 15
seconds of each track
Disc: Plays the first 15 seconds
of the first track of all
loaded discs
Track: Repeats current track Disc: Randomly plays all tracks
Disc: Repeats all tracks of the
of the current disc
All: Randomly plays all tracks
of all loaded discs
current disc
Track: Plays the first 15
seconds of each track
Track: Repeats current track Folder: Randomly plays all
Folder: Repeats all tracks of
tracks of current folder,
Folder: Plays the first 15
the current folder
then tracks of next folders
seconds of the first track of Disc: Repeats all tracks of the Disc: Randomly plays all tracks
each folder
current disc
of the current disc
All: Randomly plays all tracks
of all loaded discs
Disc: Plays the first 15 seconds
of the first track of all
loaded discs
You can use the following buttons on the remote
controller to operate the CD changer.
• You can easily turn on or off Track Repeat by
pressing [SHORT CUT] on the touch panel,
then...
ꢀpage 51
: Select disc.
: Select folder (MP3 only).
: Press: Select track.
Hold: Reverse/forward search.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
Listening to the iPod/D. player
Track no./Play time
Sound mode
(ꢀpage 51)
ꢀpage 47
[4¢]Press: Select track
Hold: Reverse/forward search
Enter player’s menu
:
Buttons on the touch panel. In the
explanation, they are indicated
inside [ ].
[5]
[∞]
Pause/stop play
• To resume, press again.
It is required to connect the interface adapter
(KS-PD100 for Apple iPod or KS-PD500 for JVC D. player)
to the CD changer jack on the rear.
Selecting a track from the
player’s menu
Preparation:
Make sure <iPod> or <D. player> is selected for
<External Input>. (ꢀpage 59)
1
Press [5] to enter the player’s menu.
“SEARCH” flashes on the monitor during menu
operations.
• This mode will be canceled if no operations are
done for about 5 seconds.
~ Press [SOURCE], then press [iPod] or
[D.PLAYER] (ꢀpage 9)
2
Press [4] or [ ¢] to select the desired
item.
Playback starts automatically.
Press: Select an item.
Hold: Skip 10 items at a time if more than 10
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
items.
For iPod:
Ÿ Press [4] or [¢] to select a track.
Playlists Ô Artists Ô Albums Ô Songs
Ô Genres Ô Composers Ô (back to the
beginning)
For D. player:
Playlist Ô Artist Ô Album Ô Genre Ô
Track Ô (back to the beginning)
Continued on the next page
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press [∞] to confirm the selection.
3
Select an appropriate option.
4
Repeat steps 2 and 3 to select a track.
• When a track is selected finally, playback starts.
• To return to the previous menu, press [5].
Selecting playback modes
1
Repeat One: Functions the same as “Repeat
One” or “Repeat Mode = One.”
All: Functions the same as “Repeat
All” or “Repeat Mode = All.”
Random Album: Functions the same as
“Shuffle Albums” of the iPod.
Song/On: Functions the same as
“Shuffle Songs” or “Random Play
= On.”
• You can also use AV MENU on the monitor panel.
2
• When the playback modes are selected, the
corresponding indicators lights up alternately on the
monitor.
To cancel, select <Off>.
• You can easily turn on or off Track Repeat by
pressing [SHORT CUT] on the touch panel,
then...
ꢀpage 51
47
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
Using other external components
AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN plugs.
Assigned title (ꢀpage 52)
Sound mode (ꢀpage 51)
• You can easily access to <Aspect>
setting menu by pressing [SHORT CUT]
on the touch panel, then...
ꢀpage 51
: Buttons on the touch panel. In the explanation, they are indicated inside [ ].
These buttons also work when they are not shown on the touch panel (while watching pictures on the
screen).
~ Press [SOURCE], then press [AV-IN]. (ꢀpage 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Turn on the connected component and start playing the source.
To display the operation buttons (ꢀ page 17) while watching the playback picture
Touch the screen (center portion).
Touch the screen (center portion).
• If no operations are done for about 5 seconds, the operation buttons disappear.
• [KEY] does not work when the source is “AV-IN.”
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation screen
You can also connect a Navigation System to the VIDEO IN plug so that you can watch the navigation screen.
Preparation:
Make sure <Navigation> is selected for <AV Input>. (ꢀpage 58)
To view the navigation screen (and listen to the navigation guidance)*
~ Press DISP on the monitor panel repeatedly. (ꢀpage 9)
• The aspect ratio of the navigation screen is fixed to
<Full> regardless of the <Aspect> setting (ꢀpage
55).
*
If your Navigation System is equipped with the voice guidance function.
To display the operation buttons (ꢀ page 17) while viewing the navigation screen
• The operation buttons displayed on the screen vary among the playback sources.
Touch the screen (center portion).
Touch the screen (center portion).
• If no operations are done for about 5 seconds, the operation buttons disappear.
• The above buttons except [KEY] also work when they are not shown on the touch panel (while viewing the
navigation screen).
When <Navigation> is selected for <AV Input>. (ꢀpage 58)
• You can use the source <AV-IN> for listening to an audio source connected to the LINE IN plugs.
• Some status messages such as volume level will not appear on the monitor.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL DEVICES
EXT-INPUT
You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57
(not supplied) or AUX Input Adapter—KS-U58 (not supplied).
Assigned title (ꢀpage 52)
Sound mode
(ꢀpage 51)
ꢀ page 51
:
Buttons on the touch panel. In the explanation, they are indicated inside [ ].
Preparation:
Make sure <External> is selected for <External Input>. (ꢀpage 59)
~ Press [SOURCE], then press [EXT-IN]. (ꢀpage 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Turn on the connected component and start playing the source.
50
EXTERNADLoDwnElVoaICd EfrSom Www.Somanuals.com. All Manuals Search And Download.
Sound equalization
You can select a preset sound mode for 2-channel sources.
While playing any source other than
“Bluetooth PHONE,” <Equalizer>
menu can be easily accessed by pressing
[SHORT CUT] on the touch panel, then...
Storing your own adjustment
Selecting sound mode
You can store your adjustment into User1, User2, and
User3.
~
1
Repeat steps ~ and Ÿ, then in step !...
• You can also use AV MENU on the monitor panel.
Ÿ
2
Adjust (1), then store (2).
!Select a sound mode.
Ex. When storing into [User 2].
Move to other 6 sound modes
• For preset values of each sound mode, ꢀ
page 69.
• For multi-channel source, the sound mode is
temporarily canceled.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
Assigning titles to the sources
Buttons on the touch panel. In the
explanation, they are indicated inside
[
].
You can assign titles as follows.
! Assign a title.
FM/AM and TV Up to 16 characters—up to 30
stations
stations (separately for FM/AM
and TV).
AV-IN
Up to 16 characters
EXT-IN
~ Select the source. (ꢀ page 9)
• For FM/AM stations: Select the band, then
tune in to a station.
• For TV stations: Tune in to a station.
You can enter up to 16 characters (for available
characters, ꢀpage 69).
• [Store]: Confirm the entry.
• [2/3]: Moves the cursor.
• [BS]: Erases the previous character before the
cursor.
Ÿ Display <Title Entry> screen.
• [Del]: Erases the character on the cursor.
• [Cap]: Changes the upper/lower cases.
• [Space]: Enter a space.
• You can also use AV MENU on the monitor panel.
• [Change]: Change the character set.
⁄ Finish the procedure.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operations
The following steps are one of the fundamental
procedures. Some of the settings do not open the
sub-setting window, but just selecting an option will
change the setting.
!
Ex. Changing the <AV Input> setting
~
• You can also use AV MENU on the monitor panel.
Ÿ
Non-available items will be displayed being
shaded.
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search And Download.
53
SETTINGS
Initial: Underlined
Setup
Menu items
Demonstration
Selectable settings, [reference page]
Off: Cancels.
On: Activates the demonstration on the monitor. To stop it temporarily,
touch the monitor screen.
Wall Paper
Color
You can select the background picture of the monitor.
Warp Drive, X-Face, Wave, Ring
You can select the color of the <Wall Paper>.
Blue, Sky, Green, Red, Yellow, Purple, Dark-Blue, Dark-Sky, Dark-
Green, Dark-Red, Brown, Black
Scroll
Off: Cancels.
Once: Scrolls the disc information once.
Auto: Repeats scrolling (5-second intervals).
• Holding DISP on the monitor panel scrolls the information regardless
of this setting.
Dimmer
Off: Cancels.
On: Activates dimmer.
Auto: Dims the monitor when you turn on the headlights.*1
Dimmer Time Set : Activates the Dimmer Time setting below.
Dimmer Time Set
Dimmer Level
Sets the Dimmer On/Off times.
You can preset the brightness for dimmer.
00 (brightest) to 10 (darkest); Initial 05
Bright
You can adjust brightness of the monitor.
–15 (darkest) to +15 (brightest); Initial 00
Picture Adjust*2
You can adjust the following to make the monitor clear and legible for
watching the playback picture. The setting will be stored—separately
for “DISC/SD/USB” (common), for “TV,” and for “AV-IN.”
–15 to +15; Initial 0
Bright: Adjust if the picture is too bright or too dark.
Contrast: Adjust the contrast.
Color: Adjust the color of the picture—lighter or darker.
Tint: Adjust the tint if the human skin color is unnatural.
• Press [5] or [∞] to adjust.
1
2
*
*
The ILLUMINATION CONTROL lead connection is required. (ꢀInstallation/Connection Manual)
Adjustable only when the source is a disc/SD/USB containing pictures or movies, “TV,” or “AV-IN.”
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu items
Selectable settings, [reference page]
Aspect*3
You can change the aspect ratio of the picture.
Aspect ratio of incoming signal
4:3 16:9
Regular:
For 4:3 original pictures
Full:
For 16:9 original pictures
Panorama:
For viewing 4:3 pictures
naturally on the wide
screen
Auto:
• For “DISC”: Aspect ratio is automatically
selected to match to the incoming signals.
• For the other video sources: Aspect ratio is
fixed to <Regular>.
Language*4
NTSC/PAL*4
Select the indication language shown on the monitor.
English, Spanish, French, German, Italian, Dutch, Swedish,
Danish, Russian
Select the color system of the external monitor connected—NTSC, PAL.
• Turn off the power and turn it on again to make the new setting
effective.
Time Set
Initial 1:00AM, ꢀ[8]
12Hours/24Hours
Select either 12-hour system or 24-hour system.
12 Hours, 24 Hours, ꢀ[8]
OSD Clock
When <On> is selected, the clock time is displayed on the playback
pictures. The clock time is displayed in large on the animation screen
(ꢀpage 9)
Off, On
3
4
*
*
Not adjustable when no picture is shown.
After you change the indication language setting, turn off then on the power so that your setting takes effect.
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search And Download.
55
SETTINGS
Menu items
Selectable settings, [reference page]
Menu Language*5
Select the initial disc menu language; Initial English (ꢀalso page
70).
Audio Language*5
Subtitle*5
Select the initial audio language; Initial English (ꢀalso page 70).
Select the initial subtitle language or erase the subtitle (Off); Initial
English (ꢀalso page 70).
OSD Language*5
Select the on-screen language used for the external monitor connected
to the VIDEO OUT plug; Initial English.
Monitor Type*5
Select the monitor type to watch a wide screen picture on the external
monitor.
16:9
4:3LB
16:9 : Select when the aspect ratio of the external monitor is 16:9.
4:3LB (Letterbox)/4:3PS (Pan Scan): Select when the aspect ratio of
the external monitor is 4:3.
4:3PS
Refer to the illustrations on the left to see how the pictures are shown
on the monitor.
OSD Position*5
Select the position of the on-screen bar, ꢀ[25].
1: Higher position
Position 1
Position 2
2: Lower position
File Type*5
Select playback file type when a disc/SD/USB contains different types
of files. You can store this setting separately for each source —“DISC/
SD/USB.”
Audio: Plays back audio files.
Picture: Plays back JPEG files.
Video: Plays back DivX/MPEG1/MPEG2 files. (Not applicable to “SD”)
Divx Regist. (Registration)*5 This unit has its own Registration Code. Once you have played back a
file with which the Registration Code recorded, this unit’s Registration
Code is overwritten for copyright protection.
D. (Dynamic) Range Compres. You can enjoy a powerful sound at a low volume level while playing
(Compression)*5
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
5
*
Selectable only for “DISC,” “SD,” and “USB.” (Playback stops when you change the setting.)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu items
Selectable settings, [reference page]
Speaker Size*5
You can adjust the speaker size setting.
As you change the speaker size, the speaker on the screen changes its
size. When <None> or <Off> is selected, the speaker is shaded.
• L/R (Front): Small, Large
• C (Center): None, Small, Large
• LS/RS (Surround): None, Small, Large
• SW (Subwoofer): On, Off
• Speaker size: <Large> for 13-cm diameter or more; <Small> for
13 cm or less.
• If you select <Large> or <Small> for non-connected speakers, the
incoming signals for the non-connected speakers will not come out
of any other speakers.
• Front speakers and surround speakers cannot be adjusted separately
for left and right speakers.
Regardless of the setting above...
• No sound comes out of the subwoofer while playing Dolby Pro Logic
II Movie or Music if the front speaker is set to <Large>.
• No sound comes out of the center speaker when surround is
deactivated.
Speaker Level*6
You can adjust the output level of the activated speakers (ꢀ
<Speaker Size> above), monitoring the test tone.
L/C/R/RS/SW*7/LS: adjust the output level of each speaker in the
range of –10dB to +10dB; Initial 00dB.
• Press [Test] to turn on and off the test tone.
Speaker Distance*6, 8
You can adjust the speaker output timing.
L/C/R/RS/LS: adjust the speaker distance from the listening position in
the range of 15cm/6 inches to 600 cm/240 inches in 15-cm/6-
inch step; Initial 120 cm/48 inches (for center speaker), 150
cm/60 inches (for other speakers).
• Press [cmÔinch] to change the measuring unit—cm and inch.
5
6
7
8
*
*
*
*
Selectable only for “DISC,” “SD,” and “USB.” (Playback stops when you change the setting.)
Selectable only for “DISC,” “SD,” and “USB.”
This subwoofer level setting takes effect only when surround is activated. (ꢀalso page 24)
This setting does not take effect for MPEG1/MPEG2 and DivX with MP3 audio track.
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search And Download.
57
SETTINGS
Menu items
Selectable settings, [reference page]
IF Band Width
Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
TV Channel Area
Select the place where you use this unit.
Australia: Select when in Australia.
New Zealand: Select when in New Zealand.
Indonesia: Select when in Indonesia.
CCIR: Normally select this.
AV Input*9
You can determine the use of LINE IN and VIDEO IN plugs.
Off: Select when no component is connected (“AV-IN” is skipped while
selecting the source).
Audio&video: Select when connecting an AV component such as a
VCR. ꢀ[48]
Audio: Select when connecting an audio component such as a digital
audio player. ꢀ[48]
Navigation : Select when connecting a Navigation System. ꢀ[49]
Camera Input*10
Off: Select when no rear view camera is connected to the CAMERA IN
plug.
Normal: Select when connecting the rear view camera to the CAMERA
IN plug. The picture from the camera is displayed as it is taken.
Mirror: The mirror image of the picture taken by the camera is
displayed on the monitor.
• While the pictures through the camera are shown on the monitor, no
message will be displayed.
9
*
Not selectable when “AV-IN” is selected as the source.
*10 Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view
through the camera appears on the monitor in <Full> aspect ratio (regardless of the aspect ratio setting) when you
shift the gear to the reverse (R) position. When you press DISP on the control panel, or when you shift the gear to
another position other than the reverse (R) position, the rear view screen is cleared.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu items
Selectable settings, [reference page]
External Input*11
For connecting an external component to the CD changer jack on the
rear.
Changer/iPod/D. player*12: CD changer, iPod, or D. player
ꢀ[44, 46]
External: Any other than the above. ꢀ[50]
• For connecting the Bluetooth adapter, this setting is not required. It is
automatically detected.
Beep
Off: Cancels.
On: Activates the key-touch tone.
Telephone Muting*13
Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while
using the cellular phone.
Power LED Flash
Off: Cancels.
On: When the ignition is turned off, the lamp on the
button
flashes.
TouchPanel Sens.
Initialize
Change the sensitivity of the touch panel. As the number decreases,
sensitivity become higher. 1/2/3; Initial 2
Initialize all settings you have made in <AV Menu>. Press and hold
[Enter] to initialize the settings, then reset the unit (ꢀpage 3).
*11 Not selectable when the component connected to the CD changer jack is selected as the source.
*
12 The name of the component detected through the CD changer jack is shown.
*13 The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).
Disc Surround*14
Menu items
Surround
Selectable settings, [reference page]
On, Off, ꢀ[24]
Surround Mode
Panorama
Auto, Through, Dolby PLII Movie, Dolby PLII Music, ꢀ[24]
On, Off, ꢀ[24]
Center Width*15
00 to 07; Initial 04, ꢀ[25]
*
*
14 Selectable only for “DISC”, “SD,” and “USB.”
15 This setting takes effect only when the center speaker is activated.
Continued on the next page
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
Equalizer
Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ꢀ[51]
Sound
Menu items
Selectable settings, [reference page]
Fader/Balance
Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only (F6)
• Downmost—rear only (R6)
When using a two-speaker system, set the fader to the center (0).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only (L6)
• Rightmost—right only (R6)
Volume Adjust
Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12 to +12; Initial 00
• For Disc/SD/USB: An auto-adjustment level is commonly used when playing
DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files
Subwoofer Phase
Subwoofer Level*16
High Pass Filter
Select either <Normal> or <Reverse>, which reproduces a better sound.
Adjust the subwoofer output level. Level: –06 to +08; Initial 00
Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.
Crossover
Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
Amplifier Gain
You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less
than 50 W)
High: VOL 00 to 50
Rear Speaker *17
You can activate/deactivate the rear speakers.
Off, On
*16 This subwoofer level setting takes effect only when surround is deactivated. (ꢀalso page 24)
17 This setting takes effect only when Dual Zone is activated. (ꢀalso page 27)
*
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode*18
Menu items
Selectable settings, [reference page]
Mono
Only for FM. (Off, On), ꢀ[10]
DX/Local
Only for FM. (Local, DX), ꢀ[11]
SSM
Only for FM. Press and hold to start SSM. ꢀ[11]
Only for FM/AM/TV stations, AV-IN, and EXT-IN. ꢀ[52]
ꢀ[18, 31, 33, 45, 47]
Title Entry
Intro/Repeat/Random
On Screen Disp.
Auto Memory
Only for TV. (Off, Channel, Channel-Station), ꢀ[36]
Only for TV, ꢀ[34]
*
18 Items listed under <Mode> vary among the playback sources.
List
For “DISC”: Folder List and Track List (ꢀpage 19)
For “CD-CH”: Disc List, Folder List, and Track List (ꢀpage 44)
• For the other playback sources, you can display a list by pressing DISP on the monitor panel (ꢀpage 9)
Bluetooth*19
Menu items
Dial Menu *20
Message*21
Selectable settings, [reference page]
Select the method to make a call. ꢀ[40]
You can read a message from the following message histories.
Unread: Messages you have not read.
Read: Messages you have read.
Unsent: Messages you have not sent.
Sent: Messages you have sent.
• The number of messages in each history is also shown on the monitor.
Open
ꢀ[37]
ꢀ[38]
Search
Special Device
Only for “New Device.”
Shows the list of Bluetooth devices which require some special procedure to
establish Bluetooth connection. Select a device you want to connect.
• After selecting the device, use <Open> or <Search> (ꢀabove) for
connection.
• Once the connection is established, it is registered in the unit. You can
connect the unit and the device by using <Connect> (ꢀ page 62) from
the next time.
Continued on the next page
61
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
Menu items
Connect
Selectable settings, [reference page]
Only for the registered devices.
After selecting a device from among the registered devices (ꢀpage 37, 38),
establish the connection with it.
Disconnect
Delete Pair
Only for the device being connected.
Disconnect the current device before connecting another device.
Only for the registered devices.
Delete the registered devices.
*19 Selectable only for “Bluetooth PHONE” or “Bluetooth AUDIO.” Select a device (or “New Device”) before operating the
menu.
*
20 Only for the device connected for “Bluetooth PHONE.”
*21 Selectable only when the source is “Bluetooth PHONE” and the device is compatible with SMS (Short Message
Service).
When operating the Bluetooth device, refer also to the instructions supplied with the device.
Menu items
Selectable settings, [reference page]
Auto Connect *22
When the unit is turned on, the connection is established automatically
with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Order: The available registered Bluetooth device found at first.
Auto Answer *23
Message Info *23
Off: The unit does not answer the calls automatically. Answer the calls
manually.
On: The unit answers the incoming calls automatically.
Reject: The unit rejects all incoming calls.
Auto: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.” To read the message, ꢀpage 40.
Manual: The unit does not informs you of the arrival of a message.
MIC Setting *23
Version *24
Adjust microphone volume connected to the Bluetooth adapter.
01/02/03 Initial 02
The Bluetooth software and hardware versions are shown.
*
22 Selectable only for “Bluetooth PHONE.”
*23 Only for the device connected for “Bluetooth PHONE.” Not selectable when “New Device” is selected.
*
24 If you wish to receive more information about Bluetooth, visit our JVC web site.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Moisture condensation
To keep discs clean
Moisture may condense on the lens inside the unit in
the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture evaporates.
A dirty disc may not play correctly.
If a disc does become dirty, wipe it with
a soft cloth in a straight line from center
to edge.
• Do not use any solvent (for example, conventional
record cleaner, spray, thinner, benzine, etc.) to clean
discs.
How to handle discs
When removing a disc from its
case, press down the center holder
of the case and lift the disc out,
holding it by the edges.
To play new discs
Center holder
New discs may have some rough spots
around the inner and outer edges. If
such a disc is used, this unit may reject
the disc.
• Always hold the disc by the edges. Do not touch its
recording surface.
To remove these rough spots, rub the edges with a
pencil or ball-point pen, etc.
When storing a disc into its case, gently insert the
disc around the center holder (with the printed surface
facing up).
Do not use the following discs:
• Make sure to store discs into the cases after use.
Warped disc
Sticker
Sticker residue
Stick-on label
63
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
More about this unit
Speaker/signal indicators for DVD
Speaker indicators
General
Turning on the power
• By pressing SOURCE on the monitor panel, you
can also turn on the power. If the source is ready,
playback starts.
Signal indicators
FM/AM
Storing stations in memory
• When SSM is over, received stations are preset in No.
1 (lowest frequency) to No. 6 (highest frequency).
• The speaker indicators—square around the letters
lights in light blue when the corresponding speakers
are set to <Large> or <Small>.
• The center speaker indicator—square around “C”
lights in light blue, when the center speaker is set
to <Large> or <Small> and when surround is
activated.
• Sounds come out of the speakers whose speaker
indicators are lit.
Disc
General
• In this manual, words “track” and “file” are
interchangeably used.
• This unit can also play back 8 cm discs.
• This unit can only play back audio CD (CD-DA) files if
different type of audio files (MP3/WMA/WAV/AAC)
are recorded in the same disc.
• This unit can display only one-byte characters. No
other characters can be correctly displayed.
• The SW indicator lights up when <SW (Subwoofer)>
is set to <On>.
• The signal indicators indicate the incoming
signals—L (front left) / R (front right) / C (center)
/ LFE (low frequency effect) / LS (left surround) / RS
(right surround) / S (monaural surround).
• If the speaker is activated, but the signals
corresponding to the speaker are not coming in, the
signal indicators changes their color from white to
black to indicate no signals coming in.
Inserting a disc
• When a disc is inserted upside down or has no
playable files, “Cannot play this disc Check the disc”
appears on the monitor. Eject the disc.
Changing the source
• If you change the source with Dual Zone deactivated,
playback also stops without ejecting the disc.
Next time you select “DISC” for the playback source,
disc play starts from where it has been stopped
previously.
Ejecting a disc
• If “No disc“ appears after removing a disc, reattach a
disc or select another playback source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Recordable/Rewritable discs
Playing MPEG1/MPEG2 files
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• Use only “finalized” discs.
• This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
• This unit can recognize a total 25 characters for file/
folder names.
• This unit can play back MPEG1/MPEG2 files with the
extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG2
files recorded by JVC Everio camcorders.
• The stream format should conform to MPEG system/
program stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
• Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
• Some discs or files may not be played back due to
their characteristics or recording conditions.
Playing DVD audio
• The maximum bit rate for video signals (average) is
as follows.
– DVD: 4 Mbps
• Some DVD Audios prohibit downmix. When you play
back such a disc, “LR ONLY” appears on the monitor
and the unit plays back the left front and right front
signals.
– USB: 2 Mbps
• “MULTI CH” appears on the monitor after a beep
when you try to play a multi-channel disc with
Surround turned <Off>.
Playing JPEG files
• This unit can play back JPEG files with the extension
code <.jpg>, or <.jpeg>.
• It is recommended that you record a file at 640 x 480
resolution.
• This unit can play back baseline JPEG files.
Progressive JPEG files or lossless JPEG files cannot be
played.
Playing DVD-VR
• This unit cannot play back CPRM (Content Protection
for Recordable Media) protected files.
• For details about DVD-VR format and play list, refer
to the instructions supplied with the recording
equipment.
Playing MP3/WMA/WAV/AAC files
• This unit can play back files with the extension
code <.mp3>, <.wma>, <.wav>, or <.m4a>
(regardless of the letter case—upper/lower).
• This unit can play back the files meeting the
conditions below:
– Bit rate:
MP3/WMA: 32 kbps — 320 kbps
AAC: 16 kbps — 320 kbps
File playback
Playing DivX files
• This unit can play back DivX files with the extension
code <.divx>, <.div>, <.avi> (regardless of the
letter case—upper/lower).
• This unit supports the DivX files whose resolution is
720 x 576 pixels or less.
• This unit supports DivX 6.x, 5.x, 4.x, and 3.11.
• Audio stream should conform to MP3 or Dolby Digital.
• The file encoded in the interlaced scanning mode
may not be played back correctly.
• The maximum bit rate for video signals (average) is
as follows.
– Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG2)
48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA)
44.1 kHz (for WAV)
48 kHz, 44.1 kHz (for AAC)
– DVD: 4 Mbps
– USB: 2 Mbps
Continued on the next page
65
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
• This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3). This unit can also show
WAV/WMA/AAC Tag.
• This unit can play back files recorded in VBR (variable
bit rate).
• Files recorded in VBR have a discrepancy in elapsed
time indication.
• This unit cannot play back the following files:
• When the SD card has no playable files, or has not
been formatted correctly, “Cannot play this SD card
Check the SD card” appears on the monitor. Replace
the SD card. Do not pull out or attach the SD card
while “Now Reading...” is shown on the monitor.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total 25 characters for file/
folder names.
–
MP3 files encoded with MP3i and MP3 PRO format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional,
and voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WMA/AAC files copy-protected with DRM.
– AAC files encoded by using any other application
than iTunes.
– AAC files purchased from the iTunes Store.
– Files which have the data such as AIFF, ATRAC3,
etc.
USB
• If “No USB Device“ appears after removing a device,
reattach a device or select another playback source.
• When the USB device has no playable files, or has not
been formatted correctly, “Cannot play this device
Check the device” appears on the monitor.
• The unit cannot recognize a USB device whose rating
is other than 5 V and does not exceed 500 mA.
• While playing from a USB device, the playback order
may differ from other players.
• This unit may be unable to play back some USB
devices or some files due to their characteristics or
recording conditions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
• When connecting a USB device, refer also to its
instructions.
• Connect only one USB device to the unit at a time. Do
not use a USB hub.
• This unit may not recognize a USB device connected
through a USB card reader.
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot assure proper functions or supply
power to all types of the devices.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total 25 characters for file/
folder names.
Enjoying surround sounds
• If <Surround> is set to <On>, “MULTI” surround
playback automatically starts for multi-channel
encoded discs.
• You cannot activate surround for MPEG multi-channel
DVD Video, DivX 2-channel and MPEG 2-channel
sources. If <Surround> is set to <On>, stereo
sounds are emitted only through the front speakers.
“FRONT 2CH” appears on the source information
screen.
• When “FIX” appears on the source information
screen, no sound comes out of the subwoofer.
• When If <Surround> is set to <Auto>,
downsampling is performed for DVD Video (LPCM
only), DVD-VR (LPCM only), and DVD Audio with
fs=88.2 kHz/96 kHz and higher.
SD
• If “No SD Card“ appears after removing an SD card,
reattach an SD card or select another playback source.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Icons for phone types
• These icons indicate the phone type set on the device.
Bluetooth operations
General
:
Cellular phone
• While driving, do not perform complicated operation
such as dialing the numbers, using phone book, etc.
When you perform these operations, stop your car in
a safe place.
:
:
Household phone
Office
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
:
:
General
Other than above
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on
circumstances around you.
• When the unit is turned off, the device is
disconnected.
CD changer
• If you select a folder, which does not include any
music files, on the list (ꢀ page 44), you will hear a
beep. Select another folder including music files.
Warning messages for Bluetooth operations
iPod/D. player operations
• Connection Error: The device is registered but the
connection has failed. Use <Connect> to connect
the device again. (ꢀ page 38)
• Error: Try the operation again. If “Error” appears
again, check if the device supports the function you
have tried.
• When you turn on this unit, the iPod or D. player is
charged through the adapter connected to this unit.
• While the iPod or D. player is connected, all
operations from the iPod or D. player are disabled.
Perform all operations from this unit.
• The text information may not be displayed correctly.
• If the text information includes more than 8
characters, it scrolls on the display. This unit can
display up to 40 characters.
• Device Unfound: No available Bluetooth device is
detected by <Search>.
• Loading: The unit is updating the phone book and/
or SMS.
• Please Wait...: The unit is preparing to use
the Bluetooth function. If the message does not
disappear, turn off and turn on the unit, then connect
the device again (or reset the unit).
• Reset 08: Check the connection between the
adapter and this unit.
Notice:
When operating an iPod or a D. player, some
operations may not be performed correctly or as
intended. In this case, visit the following JVC web
site:
For iPod users: <http://www.jvc.co.jp/english/car/
support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
Continued on the next page
67
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
• “DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation registered in the US, Japan and
other countries.
• DivX, DivX Ultra Certified, and associated logos are
trademarks of DivX, inc. and are used under license.
• Official DivX® Ultra Certified product
Title assignment
• You can assign the titles to 30 stations (both for FM/
AM and for TV). If you try to assign the title to a 31st
station, <Title Entry> screen will not appear.
Menu settings
• Plays all versions of DivX® video (including DivX® 6)
with enhanced playback of DivX® media files and the
DivX® Media Format
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• If you change the <Amplifier Gain> setting from
<High> to <Low> while the volume level is set
higher than “30,” the unit automatically changes the
volume level to “VOL 30.”
• After you change any of <Menu Language/Audio
Language/Subtitle> settings, turn off then on the
power, and re-insert the disc (or insert another disc)
so that your setting takes effect.
• When you select <16:9> for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if <4:3PS> is selected, the screen size may
become <4:3LB> for some discs.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Victor Company of Japan, Limited (JVC) is under
license. Other trademarks and trade names are those
of their respective owners.
• iPod and iTunes are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
About sounds reproduced through the rear terminals
• Speaker out/analog discrete output—LINE OUT (FRONT/REAR)/CENTER OUT/SUBWOOFER:
Multi-channel signals are emitted for a multi-channel encoded software. (When Dual Zone is activated, the
signal emitted through 2nd AUDIO OUT plugs are emitted for the main source “DISC.”)
• 2nd AUDIO OUT: 2-channel signal is emitted when Dual Zone is activated. When playing a multi-channel
encoded disc, multi-channel signals are downmixed (except for some DVD Audio).
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset equalizing values
Frequency
60 Hz
150 Hz
400 Hz
1 kHz
2.5 kHz 6.3 kHz
15 kHz
Sound mode
Flat
Hard Rock
R&B
Pop
Jazz
00
00
00
+01
+02
00
+01
00
00
00
+01
00
00
00
00
00
00
00
00
+03
+03
00
+03
+04
+02
+03
+02
00
+03
+02
+02
+02
+02
+01
00
+02
+01
+01
+03
+01
+01
+02
+02
00
+01
+03
+02
+02
+01
+02
+03
00
+01
+01
+01
–01
00
+02
00
00
00
+01
–02
00
+01
00
Dance
Country
Reggae
Classic
User1/2/3
+03
00
00
00
Characters shown on the monitor
In addition to the roman alphabet
(A – Z, a – z), and < , (comma)>,
and < . (period)>, the following
characters will be used to show the
various information on the monitor.
• You can also use the following
characters to assign titles. (ꢀ
page 52).
Numbers and symbols
Upper and lower cases
Continued on the next page
69
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
Language codes (for DVD/DivX language selection)
Code Language
Code Language
Code Language
Code Language
Code Language
AA Afar
FA Persian
KL Greenlandic
KM Cambodian
KN Kannada
KO Korean (KOR)
KS Kashmiri
KU Kurdish
OC Occitan
OM (Afan) Oromo
OR Oriya
ST Sesotho
SU Sundanese
SW Swahili
TA Tamil
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
FI
Finnish
Fiji
FJ
FO Faroese
FY Frisian
GA Irish
PA Panjabi
PL Polish
TE Telugu
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
BE Byelorussian
BG Bulgarian
BH Bihari
PS Pashto, Pushto TG Tajik
GDScots Gaelic
GL Galician
GN Guarani
GU Gujarati
HA Hausa
HI Hindi
KY Kirghiz
PT Portuguese
QU Quechua
TH Thai
TI Tigrinya
LA Latin
LN Lingala
RM Rhaeto-Romance TK Turkmen
LO Laothian
LT Lithuanian
RN Kirundi
TL Tagalog
TN Setswana
TO Tonga
TR Turkish
TS Tsonga
TT Tatar
RO Rumanian
LV Latvian, Lettish RW Kinyarwanda
BI
Bislama
HR Croatian
MG Malagasy
MI Maori
SA Sanskrit
SDSindhi
BN Bengali, Bangla HU Hungarian
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
HY Armenian
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA Nauru
SG Sangho
IA
IE
IK
Interlingua
Interlingue
Inupiak
SH Serbo-Croatian TW Twi
SI
Singhalese
UK Ukrainian
UR Urdu
SK Slovak
SL Slovenian
SM Samoan
SN Shona
IN Indonesian
IS Icelandic
IW Hebrew
JI Yiddish
UZ Uzbek
CY Welsh
DZ Bhutani
EL Greek
VI
Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
ZU Zulu
SO Somali
SQ Albanian
SR Serbian
SS Siswati
EO Esperanto
ET Estonian
EU Basque
JW Javanese
KA Georgian
KK Kazakh
NE Nepali
NO Norwegian
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the
connections (as well as the instructions supplied with the external components).
Symptoms
Remedies/Causes
• No sound comes out of the center speaker.
• Center speaker is not activated. (ꢀ page 57)
• Center speaker is used only for surround playback. No
sound comes out for stereo playback.
• No sound comes out of the rear speakers, and
subwoofer.
• Rear speakers and subwoofer are not activated. (ꢀ
page 57)
• When Dual Zone is in use, this is normal with <Off>
selected for <Rear Speaker>. (ꢀ page 60)
• No sound comes out of the subwoofer while This happens while playing some discs with <Auto>
playing in stereo.
selected for <Surround Mode> (ꢀ page 24).
Cancel surround.
• The monitor is not clear and legible.
Sunshine from the windscreen may cause this symptom.
Adjust <Bright>. (ꢀ page 54)
• You cannot select “SD” and “USB” as the
source.
Deactivate Dual Zone. (ꢀ page 27)
(While Dual Zone is activated, you cannot select them as
the source.)
• The remote controller does not work.
Deactivate Dual Zone. (ꢀ page 27)
(While Dual Zone is activated, the remote controller only
functions for operating the DVD/CD player.)
• “Position Error Push Open Key” appears on
the monitor.
The monitor panel angle has been forcibly adjusted, or its
adjustment has been interrupted while opening or closing.
Press OPEN/TILT (CLOSE).
• “Mecha Error Push Reset” appears on the
monitor, and the panel does not move.
Reset the unit (ꢀ page 3).
• “SD Loading Error” appears on the monitor. SD is not inserted fully. Fully insert it into the slot to close
the monitor panel.
Continued on the next page
71
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
Symptoms
• “No Signal” appears.
Remedies/Causes
• Change the source.
• Start the playback on the external component connected
to VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
• The buttons on the monitor panel do not
work.
When the monitor panel is open, only VOL +/– and
OPEN/TILT (CLOSE) button work. The other buttons do not
function.
• The unit does not work at all.
Reset the unit. (ꢀ page 3)
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
Store stations manually. (ꢀ page 11)
Connect the aerial firmly.
• Disc can be neither recognized nor played .
• Disc cannot be ejected.
Eject the disc forcibly. (ꢀ page 3)
Unlock the disc. (ꢀ page 19)
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you used
for recording.
• Playback does not start.
• Insert the disc correctly again.
• The format of files is not supported by the unit.
• The playback picture is not clear and legible.
Adjust items in <Picture Adjust>. (ꢀ page 54)
• Sound and pictures are sometimes
interrupted or distorted.
• Stop playback while driving on rough roads.
• Change the disc.
• No playback picture appears on the monitor. Parking brake lead is not connected properly.
(ꢀ Installation/Connection Manual)
• No picture appears on the external monitor. • Connect the video cord correctly.
• Select the correct input on the external monitor.
• “Eject Error” or “Loading Error” appears on
the monitor.
Changing the source by pressing SOURCE will solve this
error.
• “Region code error” appears on the monitor
when you insert a DVD Video.
Region code is not correct. (ꢀ page 4)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Remedies/Causes
• Disc cannot be played back.
• Change the disc.
• Record the tracks using a compliant application in the
appropriate discs. (ꢀ page 4)
• Add appropriate extension codes to the file names.
• Noise is generated.
The track played back is not a playable file format. Skip to
another file.
• Tracks are not played back as you have
intended them to play.
Playback order may differs from the one played back using
other players.
• Elapsed playing time is not correct.
This sometimes occurs during playback. This is caused by
how the tracks are recorded.
• “Not Support” appears on the monitor and
track skips.
The track is unplayable.
• Noise is generated.
The track played back is not a playable file format. Skip to
another file.
• Tracks cannot play back as you have
intended them to play.
Playback order may differs from the one played back using
other players.
• “Now Reading...” keeps flashing on the
monitor.
• Readout time varies depending on the SD card/USB
device.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
• Correct characters are not displayed (e.g.
album name).
For available characters, ꢀ page 69.
• While playing a track, sound is sometimes
interrupted.
The tracks are not properly copied into the SD card/USB
device. Copy tracks again, and try again.
• TV stations cannot be received.
<TV Channel Area> setting is not correct (ꢀ page 58).
Reset the unit. (ꢀ page 3)
• “Reset 08” appears on the monitor.
Continued on the next page
73
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
Symptoms
Remedies/Causes
• Bluetooth device does not detect the unit.
This unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected device
and search again.
• The unit does not detect the Bluetooth
device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select <Open> on the unit to connect
the device. (ꢀ page 37)
• The unit does not make pairing with the
Bluetooth device.
• Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”
• Select the device name from <Special Device>, then
try to connect again. (ꢀ pages 38, 61)
• Echo or noise occurs.
Adjust the microphone unit position.
• Phone sound quality is poor.
• Reduce the distance between the unit and the Bluetooth
audio device.
• Move the car to place where you can get a better signal
reception.
• The sound is interrupted or skipped during
playback of a Bluetooth audio device.
• Reduce the distance between the unit and the Bluetooth
audio device.
• Disconnect the device connected for “Bluetooth PHONE.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device
again.
• “New Device” cannot be selected for
“Bluetooth AUDIO.”
Bluetooth audio device is being connected. To select “New
Device,” disconnect it. (ꢀ page 38)
• The connected audio device cannot be
controlled.
Check whether the connected audio device supports AVRCP
(Audio Video Remote Control Profile).
• “Reset 08” appears on the monitor.
• “No Disc” appears on the monitor.
• “No Magazine” appears on the monitor.
Check the connection between the adapter and this unit.
Insert a disc into the magazine.
Insert the magazine.
• “Cannot play this disc Check the disc”
appears on the monitor.
Disc does not include playable files. Replace the disc with
playable files.
• “Reset 08” appears on the monitor.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on the
monitor.
Press the reset button of the CD changer.
• The CD changer does not work at all.
Reset the unit. (ꢀ page 3)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Remedies/Causes
• The iPod/D. player does not turn on or does • Check the connecting cable and its connection.
not work.
• Charge the battery.
• For D. player: Update the firmware version.
• Sound is distorted.
Deactivate the equalizer either on this unit or the iPod/
D. player.
• “Disconnect” appears on the monitor.
• For iPod: Playback stops.
Check the connecting cable and its connection.
The headphones are disconnected during playback. Restart
playback.
• No sound can be heard.
• “Error 01” appears on the monitor when
connecting a D. player.
Disconnect the D. player from the adapter. Then, connect
them again.
• “No Files” or “No Track” appears on the
monitor.
No tracks are stored. Import tracks to the iPod or D. player.
• “Reset 01” – “Reset 07” appears on the
monitor.
Disconnect the adapter from both this unit and iPod/
D. player. Then, connect them again.
• “Reset 08” appears on the monitor.
Check the connection between the adapter and this unit.
• The iPod’s or D. player’s controls do not work Reset the iPod or D. player.
after disconnecting from this unit.
• No picture appears on the monitor.
• Turn on the video component if it is not on.
• This unit is not connected to the video component
correctly. Connect it correctly.
• Playback picture is not clear and legible.
Adjust items in <Picture Adjust>. (ꢀ page 54)
75
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
Specifications
Maximum Power Output:
Front/Rear:
Front/Rear:
50 W per channel
Continuous Power Output
(RMS):
20 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8% total
harmonic distortion
Load Impedance:
4 Ω (4 Ω to 8 Ω allowance)
Equalizer Control Range:
Frequencies:
Level:
60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz,
6.3 kHz, 15 kHz
10 dB
Signal-to-Noise Ratio:
70 dB
Audio Output Level
LINE OUT (FRONT/REAR)/
CENTER OUT/ SUBWOOFER:
Line-Out Level/Impedance:
Output Impedance:
5.0 V/20 kΩ load (full scale)
1 kΩ
Color System:
NTSC/PAL
Video Output (composite):
Other Terminals:
1 Vp-p/75 Ω
LINE IN, VIDEO IN, CAMERA IN, USB input
terminal, Aerial input
Input:
Output:
Others:
FM:
2nd AUDIO OUT, VIDEO OUT
CD changer
Frequency Range:
FM Tuner
87.5 MHz to 108.0 MHz
AM:
531 kHz to 1 602 kHz
11.3 dBf (1.0 μV/75 Ω)
16.3 dBf (1.8 μV/75 Ω)
65 dB
Usable Sensitivity:
50 dB Quieting Sensitivity:
Alternate Channel Selectivity (400 kHz):
Frequency Response:
Stereo Separation:
40 Hz to 15 000 Hz
35 dB
AM Tuner
Sensitivity/Selectivity:
20 μV/35 dB
Signal Detection System:
Frequency Response:
Non-contact optical pickup (semiconductor laser)
DVD, fs=48 kHz:
DVD, fs=192 kHz:
VCD/CD:
16 Hz to 22 000 Hz
16 Hz to 88 000 Hz
16 Hz to 20 000 Hz
93 dB
Dynamic Range:
Signal-to-Noise Ratio:
Wow and Flutter:
Compatible File System:
Capacity
95 dB
Less than measurable limit
FAT 32/16/12
8 Mbytes to 2 Gbytes
Maximum 10 Mbps
Data Transfer Rate
76
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Standards:
USB 1.1
Data Transfer Rate
Full Speed: Maximum 12 Mbytes
Low Speed: Maximum 1.5 Mbytes
Compatible Device:
Compatible File System:
Max. Current:
Mass storage class
FAT 32/16/12
Less than 500 mA/5V
PAL
Color System
Channel Coverage
Australia:
VHF L: Ch 0 — 5A
UHF: Ch 28 — 69
VHF H: Ch 6 — 12
VHF H: Ch 4 — 11
VHF H: Ch 4 — 11
VHF H: Ch 5 — 12
New Zealand:
VHF L: Ch 1 — 3
UHF: Ch 21 — 69
Indonesia:
VHF L: Ch 1A — 3
UHF: Ch 21 — 69
CCIR:
VHF L: Ch 2 — 4
UHF: Ch 21 — 69
Screen Size:
7 inch wide liquid crystal display
Number of Pixel:
Drive Method:
Color System:
336 960 pixels: 480 x 3 (horizontal) × 234 (vertical)
TFT (Thin Film Transistor) active matrix format
NTSC/PAL
Aspect Ratio:
16:9 (wide)
Power Requirement:
Grounding System:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Negative ground
–10°C to +60°C
0°C to +40°C
Allowable Storage Temperature:
Allowable Operating Temperature:
Dimensions (W × H × D):
Installation Size (approx.):
Panel Size (approx.):
178 mm × 100 mm × 160 mm
171 mm × 97 mm × 21 mm
Mass (approx.):
2.7 kg (including trims and sleeve)
Required space for the monitor ejection
CAUTION: When ejecting the monitor, keep an
open space for the monitor to come out. If not,
the monitor may obstruct the steering wheel and
gearshift lever operations, as this may result in a
traffic accident.
Unit: mm
160
90.4
Design and specifications are subject to change without notice.
77
Download from Www.Somanuals.com. All Manuals Search And DRowEnFlEoaRdE.NCES
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
EN
0307MNMMDWJEIN
© 2007 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
KW-AVX900
Installation/Connection Manual
LVT1670-005A
[A]
0307MNMMDWJEIN
EN
©2007 Victor Company of Japan, Limited
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle
does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
Installing the remote controller
Holder
WARNINGS
• DO NOT install any unit and wire any cable in locations where;
– it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic
accident.
Double-sided adhesive tape
– it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.
– it may obstruct visibility.
• DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident.
• The driver must not watch the monitor while driving. If the driver watches the monitor while driving, it
may lead to carelessness and cause an accident.
Remote controller
• The driver must not put on the headphones while driving. It is dangerous to shut off the outside sounds
while driving.
• If you need to operate the unit while driving, be sure to look around carefully or you may be involved in
a traffic accident.
• If the parking brake is not engaged, “Parking Brake” flashes on the monitor, and no playback picture
will be shown.
Install the unit at an angle of less than 30˚,
taking it into account that the monitor
would eject when in use.
Required space for the monitor ejection
– This warning appears only when the parking brake wire is connected to the parking brake system
built in the car.
Notes on electrical connections:
• Replace the fuse with one of the specified rating. If the fuse blows
frequently, consult your JVC car audio dealer.
• It is recommended to connect to the speakers with maximum
power of more than 50 W (both at the rear and at the front,
30˚
90.4
160
Unit: mm
with an impedance of 4 Ω to 8 Ω).
If the maximum power is less than 50 W, change “Amplifier
Heat sink
Gain” setting to prevent the speakers from being damaged (see page 60 of the INSTRUCTIONS).
• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.
• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. However, you should make adjustments
corresponding to your specific car. If you have any questions or require information regarding
installation kits, consult your JVC car audio dealer or a company supplying kits.
Parts list for installation and connection
The following parts are provided for this unit.
If anything is missing, contact your dealer immediately.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Before installing the unit
• When mounting the unit, be sure to use the screws provided, as instructed. If other screws are used,
parts could become loose or damaged.
Main unit
Power cord
AV I/O cord
• When tightening screws or bolts, be careful not to pinch any connection cord.
• Make sure not to block the fan on the rear panel to maintain proper ventilation when installed.
1
Remove the audio system originally installed in the car, together with its mounting brackets.
Note: Be sure to keep all the screws and parts removed from your car for future use.
Attach the mounting brackets (removed from the car), to this unit (see below).
Flat head screws
(M5 x 8 mm)
Reverse gear signal extension cord
Round head screws
(M5 x 8 mm)
2
3
Connect the supplied cords.
• See page 2 for connecting the power cord.
• See page 3 for connecting the TV aerials, AV I/O cord and reverse gear signal extension cord.
• See page 4 for connecting the 5.1CH (LINE OUT) cord.
4
Install this unit using the screws removed in step 1.
Plate for use with a Nissan car
Remote controller / Holder
5.1CH (LINE OUT) cord
The following example is for installation in a Toyota car. For more details, consult your JVC car audio
dealer.
Supplied screws
Mounting bracket removed from the car
Batteries
Crimp connectors
Mounting bracket removed
from the car
Aerial cords
TV aerials
Clamps
Screws removed from the car in step 1
Supplied
screws
If necessary, restore the protruding tabs.
Select the appropriate
type fitting to your
audio system space.
Rubber spatula
Earth tape
Cleaner
Note : When installing the unit on the mounting bracket, make sure to use the supplied screws
(M5 x 8 mm). If longer screws are used, they could damage the unit.
When installing the unit in a Nissan car
Plate for use with a Nissan car
Download from Www.Somanuals.com. All Manuals Search And Download.
1
PRECAUTIONS on power supply and speaker connections:
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.
ELECTRICAL CONNECTIONS
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit.
• Be sure to ground this unit to the car’s chassis again after installation.
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1Connect the colored leads of the power cord in the order specified in the illustration below.
2Connect the aerial cord and TV aerials. (For installing and attaching the TV aerials, see diagram Å on page 3.)
3Finally connect the wiring harness to the unit.
2
TV aerial (Left)
TV aerial (Right)
Fan
15 A fuse
3
1
*
Not included for this unit
Ignition switch
A C
C
B
1
*
1
Black
*
See pages 3 and 4.
1 To metallic body or chassis of the car
Yellow *2
To a live terminal in the fuse block connecting to the car battery (bypassing
the ignition switch)
2
Rear ground terminal
Red
To an accessory terminal in the fuse block
3
Fuse block
2
Blue
To automatic antenna if any (250 mA max.)
4
(POWER ANTENNA)
1
Blue with white stripe
2
*
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
To the remote lead of other equipment (200 mA max.)
5
(REMOTE OUT)
Orange with white stripe
Brown
To car light control switch
6
(ILLUMINATION)
(TEL MUTING)
To cellular phone system
7
To parking brake of the car (see diagram ı on page 3.)
Light green
8
Crimp connector
(PARKING BRAKE)
9
White with black stripe
Purple
Green with black stripe
Green Purple with black stripe
Gray
Gray with black stripe
White
Right speaker (front)
Left speaker (rear)
Left speaker (front)
Right speaker (rear)
Download from Www.Somanuals.com. All Manuals Search And Download.
2
A
Installing the TV aerials
Before installing:
TV aerial (Left)
Aerial cords
TV aerial (Right)
Aerial cords
• Attach the aerials only to the inside of the front window glass
(so as not to obstruct your visibility through the window).
• Do not rub the aerials or the aerials’ cords with alcohol,
benzine, thinner, gasoline or other volatile substances.
• Be sure to wipe the window surface where the aerials will be
attached with the cleaner (supplied) to remove moisture, dirt,
dust, wax, oil or other substances.
White
Red
• The windows with windshield heating, wave insulated, or
thermally insulated screen will interfere with signal reception.
Consult your JVC car audio dealer.
• Aerial cords are
identical both for
the left and right TV
aerials.
• For connecting the TV aerials to the unit, see page 2.
Attaching the TV aerials
Before attaching:
• Identify the exact attachment location and confirm that the
aerials will not interfere with other aerial receptions (at least
10 cm away from the other aerials). Once you attach the aerials,
you can hardly remove them.
1
2
3
1Attach the aerials on the front windshield.
• Rub on the aerials with the rubber spatula (supplied) to firmly
fix them on the glass.
2Attach the aerial cords to the electrodes of the aerials.
3Wire the cords along the pillars, and secure them using the cord
clamps.
• Remove the pillar covers, and wire the cords so that the earth
section of the cord can touch the metallic part of the car.
4After wiring is done, attach the pillar covers.
Clamps
Earth tape
B
Connecting the parking brake lead
Connect the parking brake lead to the parking brake system built in the car.
Parking brake lead (light green)
Crimp connector
Parking brake
To metallic body or chassis of the car
Parking brake switch (inside the car)
A
Connecting the AV I/O cord
Video cord (not supplied)
CAMERA IN
To rear view camera
2nd AUDIO OUT
L
L
R
R
2nd monitor (KV-MR9010, etc.)
Cordless headphones (KS-HP2)
VIDEO OUT
LINE IN
L
L
R
R
VIDEO IN
REVERSE
GEAR
SIGNAL
Audio/video cords (not supplied)
Navigation System or playback source
Reverse gear signal extension cord *3
REVERSE
GEAR
SIGNAL
Reverse lamp
Crimp connector
To reverse lamp
To car battery
Reverse lamp lead
3
*
Required only when connecting a rear view camera to CAMERA IN plug.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
B
Connecting the external amplifiers
You can connect amplifiers to upgrade surround system in the car compartment.
• Connect the amplifiers to 5.1-ch analog discrete output plugs to enjoy multi-channel source.
• After you have connected the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the connected center speaker, see page 57 of the INSTRUCTIONS.
• You can supply the power to the amplifiers by connecting the remote leads (blue with white stripe) of this unit and amplifiers. (To connect more than one amplifier using the remote leads, Y-connectors need to
be separately purchased.)
• Disconnect the speakers from the unit, and connect them to the amplifier. Leave the speaker leads of the unit unused.
INPUT
INPUT
L
L
Front speakers
JVC Amplifier
Center speaker
JVC Amplifier
R
R
4
4
*
*
INPUT
INPUT
L
L
Subwoofer
JVC Amplifier
Rear speakers
JVC Amplifier
R
R
4
*
R
R
L
L
4
*
4
*
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause
damage to the unit.
C
Connecting external components
You can connect external components in series as shown in the diagram below.
• All the components, adapters or signal cords need to be purchased separately.
CAUTION:
Before connecting the external components, make sure that the unit is turned off.
• To use JVC CD changer, Apple iPod or JVC D. player, set “External Input” to “Changer/iPod/D. Player” (see page 59 of the INSTRUCTIONS).
• To use other external components via KS-U57 or KS-U58, set “External Input” to “External” (see page 59 of the INSTRUCTIONS).
JVC CD changer
iPod
JVC Bluetooth adapter
or
KS-PD100
KS-PD500
CD changer jack
JVC D. Player XA-HD500
or
or
5
External component with RCA pin jacks
External component with stereo-mini jack
To disconnect the connector
KS-U57
or
*
Hold the connector top tightly (1), then pull it out (2).
KS-U58
5
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
*
Audio cord (not supplied) is required.
USB devices
• You cannot connect a computer to the USB (
terminal of the unit.
)
USB cable (approx. 1.2 m)
USB device
TROUBLESHOOTING
• The fuse blows.
• Noise interfere with sounds.
* Are the red and black leads connected correctly?
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
• Power cannot be turned on.
• Unit becomes hot.
* Is the yellow lead connected?
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• This unit does not work at all.
* Have you reset your unit?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
Download from Www.Somanuals.com. All Manuals Search And Download.
4
|