T 300
T-Racer
High Pressure Washer Accessory
Part No. 2.640–508.0
Overview .............................................................. 1
Precautions ....................................................... 1-2
Assembly Instructions.......................................... 3
Operating Controls............................................... 4
Normal Operating Settings .................................. 5
Parts List .............................................................. 6
In USA Call:
1-800-537-4129
or visit our website:
5.961–208.0
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS – Read First!
Safety Warnings
Water Supply (Cold Water Only)
When using this product, basic precautions
should always be followed:
• Water hose must be at least 3/4 inch in
diameter.
• Read all the instructions before using
the product.
• Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
• High pressure jets can be dangerous if
subject to misuse. The jet must not be
directed at persons, animals, electrical
devices, or the machine itself.
• Flow rate can be determined by running
the water for one minute into an empty
5-gallon container.
• The water supply temperature must not
exceed 104°F/40°C.
• Wear safety goggles.
• Keep hands away from moving parts.
• Never use the pressure washer to draw
in water contaminated with solvents,
e.g. paint thinners, gasoline, oil, etc.
• Do not use acids, alkalines, solvents, or
any flammable material in this product.
These products can cause physical
injuries to the operator and irreversible
damage to the machine.
• Always prevent debris from being drawn
into the unit by using a clean water
source.
• Stay alert — watch what you are doing.
• Do not operate the product when
fatigued or under the influence of
alcohol or drugs.
• Do not stand on unstable surfaces.
Stand with both feet balanced at all
times.
3
WARNING
TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PERSONS
OR ANIMALS.
• The Gun Safety Lock PREVENTS the
trigger from accidentally being engaged.
This safety feature DOES NOT lock
trigger in the on position.
CAUTION
Never use:
Please Note:
• Follow the
maintenance
instructions specified
• Bleach, Chlorine
products and other
corrosive chemicals
• For optimum setting
test the spray power
in an unseen area.
in the manual.
• Liquids containing
solvents (i.e., paint
thinners, gasoline,
oils)
• Never operate in the
same area for more
than 2 seconds,
• This machine has
been designed for use
with cleaning
damage may occur.
detergents supplied
or recommended by
the manufacturer. The
use of other cleaning
detergents may affect
the operation of the
machine and void the
warranty.
• Tri-sodium phosphate
products
• Do not use on
windows.
• Ammonia products
• Acid-based products.
These chemicals will
harm the unit and will
damage the surface
being cleaned.
• Keep hands away
from moving parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Step 1
Determine the PSI of your pressure washer.
1200–1600 PSI, Select the gray nozzles.
1700–2300 PSI, Select the yellow nozzles.
GRAY
YELLOW
Step 2
Step 3
Step 4
Insert the 2 matching
pressure nozzles in the slots lower handle by twisting
on the propeller and secure
with cramp.
Insert upper handle into the
Insert lower handle into
main housing. Push down
and turn clockwise 90° to
lock in lower handle.
4
together.
Step 5
Step 6
Step 7
Tighten Lock collar to
assemble by twisting
counter clockwise.
Insert pressure washer
wand into upper handle.
Push wand down over upper
handle and twist clock-wise
1/4 turn into locked position.
Turn locking collar clock-
wise over pressure washer
wand until tight.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION CONTROLS
Spray Power
Adjust height of propeller spray head.
Clockwise for wood surfaces counter clockwise for stone, concrete and tile.
5
Air Flow Control
Adjust the hover effect of the T-Racer by pushing the Air Flow Control
into one of the positions from 0 – 1.
The lowest position is 0 and the highest position is 1.
Please Note:
• For optimum setting test the spray power in an unseen area.
• Never operate in the same area for more than 2 seconds, damage may occur
• Do not use on windows..
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL OPERATION SETTINGS
Horizontal Wood and Decks
Adjust height of the spray head clockwise. Open (0) the air flow vents.
Vertical Wood, Siding and Facades
Adjust height of the spray head clockwise. Close (1) the air flow vents. Do not use on windows.
6
Horizontal Tile, Concrete and Stone
Adjust height of the spray head counter clockwise. Open (0) the air flow vents.
Vertical Tile, Concrete and Stone
Adjust height of the spray head Counter clockwise. Close (1) the air flow vents.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
7
In USA Call:
1-800-537-4129
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|