JVC Car Stereo System GET0125 001A User Manual

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

KD-SX998R/KD-SX997R

ATT

SOUND

SOURCE

VOL

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Pour l’installation et les raccordements, se référer au manuel séparé.

Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de

desbetreffende handleiding.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

GET0125-001A

[E/EX]

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

How to use the MODE button ...................

MP3 OPERATIONS ......................... 26

Playing an MP3 disc ................................. 26

Locating a file or particular portion

LOCATION OF THE BUTTONS ............

Control panel.............................................

Remote controller......................................

Preparing the remote controller ................

on an MP3 disc....................................... 27

Selecting MP3 playback modes ................ 29

SOUND ADJUSTMENTS ................... 30

Selecting preset sound modes

BASIC OPERATIONS .......................

Turning on the power ................................

Setting the clock........................................

(C-EQ: custom equalizer) ....................... 30

Adjusting the sound .................................. 31

OTHER MAIN FUNCTIONS ................ 32

Changing the general settings (PSM) ....... 32

Assigning names to the source .................. 36

Detaching the control panel ...................... 37

RADIO OPERATIONS ......................

Listening to the radio.................................

Storing stations in memory ....................... 11

Tuning in to a preset station ...................... 12

CD CHANGER OPERATIONS .............. 38

Playing discs ............................................. 38

Selecting the playback modes .................. 41

RDS OPERATIONS ......................... 13

What you can do with RDS ....................... 13

Other convenient RDS functions and

adjustments ............................................ 17

EXTERNAL COMPONENT OPERATIONS ... 42

Playing an external component................. 42

CD OPERATIONS ........................... 20

Playing a CD ............................................. 20

Locating a track or a particular portion

DAB TUNER OPERATIONS ................ 43

Tuning in to an ensemble and one of the

on a CD .................................................. 21

Selecting CD playback modes .................. 22

Playing a CD Text ...................................... 23

Prohibiting disc ejection ............................ 23

services .................................................. 43

Storing DAB services in memory .............. 44

Tuning in to a preset DAB service ............. 45

What you can do more with DAB .............. 46

MP3 INTRODUCTION ...................... 24

What is MP3?............................................ 24

How are MP3 files recorded and

TROUBLESHOOTING ...................... 47

MAINTENANCE ............................. 50

Handling discs........................................... 50

played back? .......................................... 24

SPECIFICATIONS ........................... 51

Note:

For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on

the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.

BEFORE USE

*For safety....

*Temperature inside the car....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION OF THE BUTTONS

Control panel

Display window

s d

3 4

9p q

;

(standby/on/attenuator) button

; TP/PTY (traffic programme/programme type)

button

2 5 (up) button

+10 button

a AUX (auxiliary) input jack

3 4

/¢

buttons

4 Remote sensor

5 Display window

6 0 (eject) button

7 FM/AM (DAB) button

8 CD CD-CH (CD changer) (AUX: auxiliary)

Display window

s Disc information indicators

TAG (ID3 Tag),

d CD–in indicator

f Main display

g Playback item indicators

(disc), (folder/file)

h Source/clock display

j EQ (equalizer) indicator

k Sound mode (C-EQ: custom equalizer)

indicators

ROCK, CLASSIC, POPS, HIP HOP, JAZZ,

USER

l LOUD (loudness) indicator

/ Tuner reception indicators

MO (monaural), ST (stereo)

z RDS indicators

AF, REG, TP, PTY

x MP3 indicator

c Volume (or audio) level indicator

Equalizer pattern indicator

v Playback mode indicators

RND (random), RPT (repeat)

(folder),

(track/file)

button

(control panel release) button

p ∞ (down) button

–10 button

q SEL (select) button

w Control dial

e EQ (equalizer) button

r MO (monaural) button

t Number buttons

y RPT (repeat) button

u RND (random) button

i MODE button

• Also functions as SSM buttons when pressed

together with DISP (display) button.

o DISP (display) button

• Also functions as SSM buttons when pressed

together with MODE button.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 • Selects the preset stations while listening to

the radio (or the DAB tuner).

Remote controller

Each time you press the button, the preset

station (or service) number increases, and

the selected station (or service) is tuned in.

• Skips to the first file of the previous folder

while listening to an MP3 disc.

ATT

SOUND

Each time you press the button, you can

move to the previous folder and start playing

the first file.

• While playing an MP3 disc on an MP3-

compatible CD changer;

– Skips to the previous disc if pressed

briefly.

SOURCE

– Skips to the previous folder if pressed and

held.

Note: While playing a CD on a CD changer, this

always skips to the previous disc.

VOL

4 Functions the same as the control dial on the

main unit.

Note: These buttons do not function for the

preferred setting mode adjustment.

1 • Turns on the unit if pressed when the unit is

turned off.

5 Selects the sound mode (C-EQ: custom

equalizer).

• Turns off the unit if pressed and held until

“SEE YOU” appears on the display.

• Drops the volume level in a moment if

pressed briefly.

Each time you press the button, the sound

mode (C-EQ) changes.

6 Selects the source.

Press again to resume the volume.

Each time you press the button, the source

changes.

2 • Selects the band while listening to the radio

(or the DAB tuner).

7 • Searches for stations while listening to the

radio.

Each time you press the button, the band

changes.

• Skips to the first file of the next folder while

listening to an MP3 disc.

Each time you press the button, you can

move to the next folder and start playing the

first file.

• While playing an MP3 disc on an MP3-

compatible CD changer;

• Selects services while listening to the DAB

tuner if pressed briefly.

• Searches for ensembles while listening to

the DAB tuner if pressed for more than one

second.

• Fast-forwards or reverses the track/file if

pressed and held while listening to a disc.

• Skips to the beginning of the next track/file

or goes back to the beginning of the current

(or previous) tracks/files if pressed briefly

while listening to a disc.

– Skips to the next disc if pressed briefly.

– Skips to the next folder if pressed and

held.

Note: While playing a CD on a CD changer, this

always skips to the next disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Return the battery holder.

Preparing the remote

controller

Insert again the battery holder by pushing it

until you hear a clicking sound.

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

(back side)

Remote sensor

WARNING:

• Store the battery in a place where children

cannot reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

• Do not recharge, short, disassemble, or heat the

battery or dispose of it in a fire.

Doing any of these things may cause the battery

to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic

materials.

Doing this may cause the battery to give off

heat, crack, or start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may start to give off heat, crack, or start

a fire.

Installing the battery

When the controllable range or effectiveness of

the remote controller decreases, replace the

battery.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

2) Remove the battery holder.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off

heat, crack, or start a fire.

(back side)

CAUTION:

DO NOT leave the remote controller in a place

(such as dashboards) exposed to direct sunlight for

a long time. Otherwise, it may be damaged.

2. Place the battery.

Slide the battery into the holder with the +

side facing upwards so that the battery is

fixed in the holder.

KD-SX998R and KD-SX997R are equipped

with the steering wheel remote control

function.

Lithium coin

battery (product

number: CR2025)

If your car is equipped with the steering wheel

remote controller, you can operate these units

using the controller.

• See the Installation/Connection Manual

(separate volume) for connection to utilize

this function.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

Volume level appears.

Turning on the power

1 Turn on the power.

Volume (or audio) level indicator

(see page 34)

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

4 Adjust the sound as you want. (See

pages 30 and 31.)

2 Select the source.

To drop the volume in a moment

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial, you can also restore

the sound.

To operate the tuner (FM or AM),

see pages 9 – 19.

To play a CD,

see pages 20 – 23.

To play an MP3 disc,

see pages 26 – 29.

To operate the CD changer,

see pages 37 – 41.

To operate the external component

(LINE IN or AUX IN), see page 42.

To operate the DAB tuner,

see pages 43 – 46.

To turn off the power

Press and hold

second.

“SEE YOU” appears, then the unit turns off.

• If you turn off the power while listening to a

disc, disc play will start from where playback

has been stopped previously, next time you

turn on the power.

for more than one

3 Adjust the volume.

CAUTION on Volume Setting:

Discs produce very little noise compared with

other sources. If the volume level is adjusted for

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

level. Therefore, lower the volume before playing a

disc and adjust it as required during playback.

To increase the volume

To decrease the volume

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the clock

4 Set the clock system.

1 Select “24H/12H.”

2 Select “24H” or “12H.”

You can also set the clock system to either

24 hours or 12 hours.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 32 and 33.)

5 Finish the setting.

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

2 Adjust the hour.

Note:

To show the clock time on the display, see page 34.

To check other information during play, press

DISP (display).

Each time you press the button, the other

information will be shown on the upper part of

the display. (See page 34 for details.)

• Pressing DISP (display) with the unit turned off

will show the clock time for about 5 seconds.

3 Set the minute.

1 Select “CLOCK M” (minute).

2 Adjust the minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO OPERATIONS

Listening to the radio

2 Start searching a station.

To search stations of

You can use either automatic searching or

manual searching to tune in to a particular

station.

higher frequencies

Searching a station automatically:

Auto search

To search stations of lower frequencies

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

Selected band appears*.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

* When “CLOCK” is set to “ON” (see page 34),

the current indication will soon change to the

clock time.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

Download from Www.Somanuals.com. All Manuals Search And Download.

When an FM stereo broadcast is hard to

receive:

Searching a station manually:

Manual search

1 Press MODE to enter the

functions mode while listening

to an FM stereo broadcast.

“MODE” flashes on the upper

part of the display.

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

2 Press MO (monaural), while

“MODE” is still flashing on the

display, so that the MO

indicator lights up on the

display.

Each time you press the

button, the MO indicator lights

up and goes off alternately.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Press and hold ¢

or 4

until “MANU” (manual) starts

flashing on the display.

MO (monaural) indicator

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

3 Tune in to a station you want while

“MANU” (manual) is flashing.

To tune in to stations

of higher frequencies

To tune in to stations of lower frequencies

• If you release your finger from the button,

the manual mode will automatically turns

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for

FM and 9 kHz for AM—MW/LW) until you

release the button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

Ex.: Storing FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

• Manual preset of both FM and AM stations

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

Each time you press the

button, the band changes as

follows:

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

Each time you press the

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

button, the band changes as

follows:

2 Tune in to a station (in this example,

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

of 88.3 MHz).

To tune in to stations

of higher frequencies

2 Press and hold both buttons for

more than 2 seconds.

To tune in to stations of lower frequencies

“- -SSM- -” appears, then disappears

when automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning in to a preset station

3 Press and hold the number button

(in this example, 1) for more than

2 seconds.

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 11 and 12.

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

Selected band/preset number

and “MEMO” (memory) appear

alternately for a while.

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

2 Select the number (1 – 6) for the

preset station you want.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

Download from Www.Somanuals.com. All Manuals Search And Download.

RDS OPERATIONS

To use Network-Tracking Reception

What you can do with RDS

You can select the different modes of network-

tracking reception to continue listening to the

same programme in its finest reception.

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Another advantage of RDS function is called

“Enhanced Other Networks.” By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favorite

programme or traffic announcement while

listening to another programme or to another

source such as CD.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

activated with Regionalization set to

“off.”

With this setting, the unit switches to

another station within the same

network when the receiving signals

from the current station become

weak. (In this mode, the programme

may differ from the one currently

received.)

The AF indicator lights up but the

REG indicator does not.

By receiving the RDS data, this unit can do the

following:

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

• AF REG: Network-Tracking Reception is

activated with Regionalization set to

“on.”

With this setting, the unit switches to

another station, within the same

network, broadcasting the same

programme when the receiving

signals from the current station

become weak.

• And some other functions

Tracing the same programme

automatically (Network-Tracking

Reception)

Both the AF indicator and the REG

indicator light up.

• OFF:

Network-Tracking Reception is

deactivated.

Neither the AF indicator nor the REG

indicator lights up.

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting the

same programme with stronger signals. So, you

can continue to listen to the same programme in

its finest reception, no matter where you drive.

(See the illustration on page 19.)

AF indicator

REG indicator

Two types of the RDS data are used to make

Network-Tracking Reception work correctly

—PI (Programme Identification) and AF

(Alternative Frequency).

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

Note:

If a DAB tuner is connected and Alternative Reception

(for DAB services) is activated, Network-Tracking

Reception is also activated (“AF”) automatically. On

the other hand, Network-Tracking Reception cannot

be deactivated without deactivating Alternative

Reception. (See page 46.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Using TA Standby Reception

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 32 and 33.)

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

the current source (another FM station, CD, or

other connected components).

• TA Standby Reception will not work if you are

listening to an AM station.

Press TP/PTY to activate TA Standby Reception.

2 Select “AF-REG” (alternative

frequency/regionalization reception)

if not shown on the display.

7 When the current source is FM, the TP

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically tunes in to

the station. The volume changes to the

preset TA volume level (see page 18) and the

traffic announcement can be heard.

3 Select the desired mode—“AF,”

“AF REG,” or “OFF.”

• If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

4 Finish the setting.

signals. Press ¢

or 4

to search

for such a station.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

To deactivate the TA Standby Reception,

press TP/PTY again. The TP indicator

disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using PTY Standby Reception

4 Finish the setting.

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from the current source

(another FM station, CD, or other connected

components).

• PTY Standby Reception will not work if you are

listening to an AM station.

7 When the current source is FM, the PTY

indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

If a station starts broadcasting the selected

PTY programme, this unit automatically

tunes in to the station.

You can select your favorite programme type for

PTY Standby Reception.

When shipped from the factory, PTY Standby

Reception is turned off. (“OFF” is selected for

PTY Standby Reception.)

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated since the

station being received does not provide the

signals used for PTY Standby Reception.

To activate PTY Standby Reception, you

need to tune in to another station providing

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 32 and 33.)

these signals. Press ¢

or 4

search for such a station.

When a station providing these signals is

tuned in, the PTY indicator stops flashing

and remains lit. Now PTY Standby Reception

is activated.

2 Select “PTY STBY” (standby) if not

shown on the display.

7 When the current source is other than FM,

the PTY indicator lights up.

If a station starts broadcasting the selected

PTY programme, this unit automatically

changes the source and tunes in to the station.

To deactivate the PTY Standby Reception,

select “OFF” in step 3 on the left column. The

PTY indicator disappears.

3 Select one of the twenty-nine PTY

codes. (See page 19.)

Selected code name

appears on the display

and is stored into

memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

Searching your favorite programme

2 Select one of the twenty-nine PTY

codes. (See page 19.)

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

programme types in the number buttons.

When shipped from the factory, the following

6 programme types have been stored in the

number buttons (1 to 6).

Selected code name

appears on the display.

To store your favorite programme types, see

below.

3 Press and hold the number button

for more than 2 seconds to store the

PTY code selected into the preset

number you want.

To search your favorite programme type, see

page 17.

POP M

ROCK M

EASY M

CLASSICS

AFFAIRS

VARIED

To store your favorite programme types

Selected preset number and “MEMO”

(memory) appear alternately.

1 Press and hold TP/PTY for more

than 2 seconds while listening to an

FM station.

4 Press and hold TP/PTY for more

than 2 seconds to exit from this

mode.

The last selected PTY code appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

• If there is no station broadcasting a

programme of the same PTY code as you

selected, the station will not change.

To search your favorite programme type

1 Press and hold TP/PTY for more

than 2 seconds while listening to an

FM station.

Note:

In some areas, the PTY search will not work correctly.

Other convenient RDS

The last selected PTY code appears.

functions and adjustments

2 To select one of your favorite

programme type

Automatic selection of the station

when using the number buttons

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

To select any one of the twenty-nine

PTY codes

• The unit takes some time to tune in to another

station using programme search.

To activate programme search, follow the

procedure below.

• See also “Changing the general settings

(PSM)” on page 32.

Preset number appears only if you select

a PTY code using the number buttons.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

Ex.: When “ROCK M” is selected

2 Press ¢

or 4

to select

“P(Programme)-SEARCH.”

3 Press ¢

or 4

to start PTY

3 Turn the control dial clockwise to select “ON.”

Now programme search is activated.

4 Press SEL (select) to finish the setting.

search for your favorite programme.

To cancel programme search, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the display mode while

listening to an FM station

You can change the initial indication on the

display to station name (PS NAME) or station

frequency (FREQ) while listening to an FM RDS

station.

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the

preset level.

• See also “Changing the general settings

(PSM)” on page 32.

• See also “Changing the general settings

(PSM)” on page 32.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

(volume).

or 4

to select “TA VOL”

2 Press ¢

(tuner display).

or 4

to select “TU DISP”

3 Turn the control dial to set to the desired

volume.

You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

3 Turn the control dial to set to the desired

indication (“PS NAME” or “FREQ”).

4 Press SEL (select) to finish the setting.

Note:

Automatic clock adjustment

By pressing DISP (display), you can change the

display while listening to an FM RDS station. Each

time you press the button, the following information

appears on the display:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS

signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings

(PSM)” on page 32.

Station name

(PS NAME)

Station frequency

(FREQ)

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

Programme type

(PTY)

2 Press ¢

or 4

to select “AUTO

ADJ” (adjustment).

3 Turn the control dial counterclockwise to select

“OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

• Then, the display goes back to the original

indication in several seconds.

To reactivate clock adjustment, repeat the

same procedure and select “ON” in step 3 by

turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

Download from Www.Somanuals.com. All Manuals Search And Download.

PTY codes

NEWS:

AFFAIRS:

News

SOCIAL:

Programmes on social

activities

Topical programmes expanding

on current news or affairs

Programmes which impart

advice on a wide variety of topics

Sport events

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

INFO:

nature of existence or ethics

SPORT:

PHONE IN: Programmes where people can

express their views either by

EDUCATE: Educational programmes

DRAMA: Radio plays

phone or in a public forum

CULTURE: Programmes on national or

regional culture

TRAVEL:

LEISURE:

JAZZ:

Programmes about travel

destinations, package tours,

and travel ideas and

opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing,

etc.

SCIENCE:

Programmes on natural science

and technology

VARIED:

Other programmes like comedies

or ceremonies

POP M:

Pop music

ROCK M:

EASY M:

LIGHT M:

Rock music

Easy-listening music

Light music

Jazz music

COUNTRY: Country music

NATION M: Current popular music from

another nation or region, in that

country’s language

OLDIES:

FOLK M:

CLASSICS: Classical music

OTHER M: Other music

WEATHER: Weather information

FINANCE: Reports on commerce, trading,

the Stock Market, etc.

Classic pop music

Folk music

CHILDREN: Entertainment programmes for

children

DOCUMENT: Programmes dealing with

factual matters, presented in an

investigative style

The same programme can be received on different frequencies.

Programme 1

broadcasting on

frequency A

Programme 1

broadcasting on

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

frequency C

Programme 1

broadcasting on

frequency D

Download from Www.Somanuals.com. All Manuals Search And Download.

CD OPERATIONS

Refer “MP3 OPERATIONS” on pages 26 to 29 for

operating MP3 discs.

The display changes to show the following:

CD–in indicator Current source indication*

Playing a CD

1 Open the control panel.

Total playing time

Total track number

of the inserted disc of the inserted disc

Notes:

• When an external component is connected to

the AUX input jack on the control panel, be

careful of handling a CD.

• When a CD is already in the loading slot,

pressing CD CD-CH (AUX) turns on the unit

and starts playback automatically.

Elapsed playing time Current track

2 Insert a CD into the loading slot.

The unit turns on,

* When “CLOCK” is set to “ON” (see page 34),

the current source indication will soon change to

the clock time.

draws the CD and

starts playback

automatically.

Notes:

• When a CD is inserted upside down, the CD

automatically ejects (if the control panel is open).

If the control panel is closed, the source changes to

the tuner, “PLEASE” and “EJECT” appear

alternately on the display.

3 Close the control panel by hand.

• When you open the control panel by pressing 0, the

CD automatically ejects.

• If there is no CD in the loading slot, you cannot

select CD as the source. “NO DISC” appears on

the display.

All tracks will be played repeatedly until you

stop playback.

• If the current disc is a CD Text, disc title/performer

and then track title will automatically appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

To stop play and eject the CD

To go to a particular track directly

Press 0.

Press the number button corresponding to the

track number to start its playback.

CD play stops and the control panel flips down.

The CD automatically ejects from the loading

slot. The source changes to the previously

selected source.

• If you change the source, CD play also stops

(without ejecting the CD).

Next time you select “CD” as the source, CD

play starts from where playback has been

stopped previously.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Notes:

• If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again

into the loading slot to protect it from dust.

(Disc play will not start this time.)

• You can eject the disc even when the unit is turned

off.

To go to a track quickly (+10 and –10

buttons)

Press MODE to enter the functions mode

while playing a CD.

“MODE” flashes on the upper

part of the display.

Locating a track or a

particular portion on a CD

Press +10 or –10.

To fast-forward or reverse the track

Press and hold ¢

while playing a CD, to

fast-forward the track.

To skip 10 tracks* forwards

to the last track

To skip 10 tracks* backwards

to the first track

Press and hold 4

reverse the track.

, while playing a CD, to

* The first time you press +10 or –10 button,

the track skips to the nearest higher or lower

track with a track number of multiple ten (ex.

10th, 20th, 30th).

Then each time you press the button, you can

skip 10 tracks (see “How to use the +10 and

–10 buttons” on page 22).

To go to the next or previous tracks

Press ¢

briefly,

while playing a CD, to go

ahead to the beginning of

the next track.

Each time you press the

button consecutively, the

beginning of the next

tracks is located and

played back.

• After the last track, the first track will be

selected, and vice versa.

Press 4

briefly, while playing a CD, to go

back to the beginning of the current track.

Each time you press the button consecutively,

the beginning of the previous tracks is located

and played back.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back tracks repeatedly

(Track Repeat Play)

How to use the +10 and –10 buttons

• Ex. 1: To select track number 32 while

You can play back the current track repeatedly.

playing track number 6

1 Press MODE to enter the functions

mode while playing a CD.

“MODE” flashes on the upper part

of the display.

(Three times)

(Twice)

2 Press RPT (repeat), while “MODE”

is still flashing on the display, so that

the “TRK RPT” appears on the

display.

Each time you press the button,

track repeat play mode turns on

and off alternately.

Track 6

\ 10 \ 20 \ 30 \ 31 \ 32

• Ex. 2 :To select track number 8 while

playing track number 36

(Three times)

(Twice)

Track 36

\ 30 \ 20 \ 10 \ 9 \ 8

RPT indicator

Selecting CD playback modes

When track repeat play is turned on, the RPT

indicator lights up on the display. The current

track starts playing repeatedly.

To play back tracks at random

(Disc Random Play)

You can play back all tracks on the CD at

random.

1 Press MODE to enter the functions

mode while playing a CD.

“MODE” flashes on the upper part

of the display.

2 Press RND (random), while

“MODE” is still flashing on the

display, so that “DISC RND”

appears on the display.

Each time you press the button,

disc random play mode turns on

and off alternately.

(disc) and RND indicators

When disc random play is turned on, the

and

RND indicators light up on the display. A track

randomly selected starts playing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a CD Text

Prohibiting disc ejection

In a CD Text, some information about the disc (its

disc title, performer, and track title) is recorded.

This CD Text information will be shown

You can prohibit disc ejection and can lock a disc

in the loading slot.

automatically when you play a CD Text.

While pressing CD CD-CH (AUX), press

and hold

for more than 2 seconds.

To change the CD Text information

manually, select text display mode while

playing a CD Text.

Each time you press the button,

the display changes as follows:

“NO EJECT” flashes on the display for about

5 seconds, and the disc is locked and cannot be

ejected.

Disc title / performer

Track title

(

lights up on the display)

Elapsed playing time and

Current track number

To cancel the prohibition and unlock the disc

While pressing CD CD-CH (AUX), press and

hold

again for more than 2 seconds.

“EJECT OK” flashes on the display for about

5 seconds, and the disc is unlocked.

Notes:

• The display shows up to 8 characters at one time

and scrolls if there are more than 8 characters.

See also “To select the scroll mode—SCROLL” on

page 35.

Some characters or symbols will not be shown (and

be blanked) on the display.

(Ex. “ABCå!d#” ]“ABCA D ”)

• When you press DISP (display) while playing a

conventional CD, “NO NAME” appears for the

disc title/performer and the track title.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 INTRODUCTION

Precautions when recording MP3 files

What is MP3?

on a CD-R or CD-RW

MP3 is an abbreviation of Motion Picture Experts

Group (or MPEG) Audio Layer 3. MP3 is simply a

file format with a data compression ratio of 1:10

(128 Kbps*). That means, by using MP3 format,

one CD-R or CD-RW can contain 10 times as

much data volume as a regular CD can.

This unit can only read MP3 files that are

recorded in the format that is compliant with ISO

9660 Level 1, Level 2, or Joliet.

How are MP3 files recorded

and played back?

* Bit rate is the average number of bits that one

second of audio data will consume. The unit

used is Kbps (1024 bits/second). To get a better

audio quality, choose a higher bit rate. The

most popular bit rate for encoding is 128 Kbps.

MP3 “files (tracks)” can be recorded in “folders”

—in PC terminology.

During recording, the files and folders can be

arranged in a way similar to arranging files and

folders of computer data.

“Root” is similar to the root of a tree. Every file

and folder can be linked to and be accessed from

the root.

This unit is incorporated with an MP3 decoder.

You can play back MP3 files (tracks) recorded on

CD-Rs, CD-RWs, and CD-ROMs.

Compatible with ID3v1 (Version 1)

Extra information data such as album title,

performer name, song title, recording year, music

genre and a brief comment can be stored within

an MP3 file.

Playback order, file search order, and folder

search order of the MP3 files recorded on a disc

are determined by the writing (or encoding)

application; therefore, playback order may be

different from the one you have intended while

recording the folders and the files.

This unit can show ID3v1 (Version 1) tags (album

name, performer name, and song title) on the

display. (See page 27.)

The illustration on the next page shows an

example of how MP3 files are recorded on a

CD-R or CD-RW, how they are played back, and

how they are searched for on this unit.

• Some characters cannot be shown correctly.

• This unit is not compatible with ID3v2

(Version 2).

Other main features in this unit:

• Maximum number of folders/files:

289 (Total)

• Available characters for folder/file names:

A–Z, 0–9, _ (underscore)

• Maximum number of characters for file

name

(ISO 9660 Level 1): 12 (inclusive of

separation mark—“.”

and extension code

—“mp3”)

(ISO 9660 Level 2): 31 (inclusive of

separation mark—“.”

Notes:

• The unit can read a CD-ROM containing MP3 files.

However, if non-MP3 files are recorded together

with MP3 files, this unit will take a longer time to

scan the disc. It may also cause the unit to

malfunction.

• The unit cannot read or play an MP3 file without

the extension code—mp3.

• This player is not compatible with the data encoded

with Layer 1 and Layer 2 formats.

• The unit is not compatible with Playlist**.

and extension code

—“mp3”)

64 (inclusive of

separation mark—“.”

and extension code

—“mp3”)

** A playlist is a simple text file, used on a PC, which

enables users to make their own playback order

without physically rearranging the files.

(Joliet):

• Maximum number of characters for folder

name: 64

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 folder/file configuration

ROOT

: Root

: Folders

: MP3 files

ROOT

Note:

There is no limit on the number of the hierarchy levels (nested folders). However, up to 8 hierarchy levels is

recommended for stable operations.

MP3 playback/search order

• The numbers in circles below the MP3 files ( ) indicate the playback order and search order of

the MP3 files. Normally this unit plays back MP3 files in the recorded order.

• The numbers inside the folders indicate the playback order and search order of the folders on an

MP3 disc. Normally this unit plays back MP3 files in the folders in the recorded order.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 OPERATIONS

Refer also to “CD OPERATIONS” on pages

The display changes to show the following:

20 to 23.

Current source indication*

CD–in indicator

Playing an MP3 disc

1 Open the control panel.

Notes:

Total folder

number

Total file

number

• When an external component is connected to

the AUX input jack on the control panel, be

careful of handling a disc.

• When a disc is already in the loading slot,

pressing CD CD-CH (AUX) turns on the unit

and starts playback automatically.

2 Insert an MP3 disc into the loading

MP3 indicator

Ex.: When the disc contains 19 folders and

144 MP3 files

slot.

The unit turns on,

draws the disc and

starts playback

automatically.

* When “CLOCK” is set to “ON” (see page 34),

the current indication will soon change to the

clock time.

Notes:

3 Close the control panel by hand.

• MP3 discs require a longer readout time.

(It differs due to the complexity of the folder/file

configuration.)

• When playback starts, folder and file names (or ID3

tags) will automatically appears. (See also page 27.)

• If you change the source or turn the power off, disc

playback stops (without ejecting the disc).

Next time you select the CD player as the source or

turn the power on, disc playback starts from where

playback has been stopped previously.

All files will be played repeatedly until you

stop playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

To stop play and eject the disc

Press 0.

Playback stops and the control panel flips down.

The disc automatically ejects from the loading

slot.

Locating a file or particular

portion on an MP3 disc

For “MP3 playback/search order” see page 25.

To fast-forward or reverse the file

Press and hold ¢

while playing an MP3

disc, to fast-forward the

file.

To change the display information

While playing back an MP3 file, you can change

the MP3 disc information shown on the display.

Each time you press DISP

(display), the display changes to

show the following:

Press and hold 4

disc, to reverse the file.

while playing an MP3

• When “TAG DISP” is set to “TAG ON”

(initial setting: see page 35)

Note:

During this operation, you can only hear intermittent

sounds. (The elapsed playing time also changes

intermittently on the display.)

Album name / performer

(folder name*)

(TAG lights up on the display)

To skip to the next or previous files

Track title (file name*)

Press ¢

briefly

(TAG lights up on the display)

while playing, to skip

ahead to the beginning of

the next file.

Each time you press the

button consecutively, the

beginning of the next files

is located and played

back.

Elapsed playing time and

Current file number

* If an MP3 file does not have ID3 tags, folder

name and file name appear. In this case, the

TAG indicator will not light up on the display.

Press 4

briefly, while playing, to skip back

• When“TAG DISP”is set to“TAG OFF”

to the beginning of the current file.

Each time you press the button consecutively,

the beginning of the previous files is located and

played back.

Folder name

(

lights up on the display)

File name

To go to a particular file quickly within the

current folder (+10 and –10 buttons)

lights up on the display)

Press MODE to enter the functions mode

while playing an MP3 disc.

“MODE” flashes on the upper

part of the display.

Elapsed playing time and

Current file number

Note:

The display shows up to 8 characters at a time and

scrolls if there are more than 8 characters.

See also “To select the scroll mode—SCROLL” on

page 35.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

Press +10 or –10.

Press the number button corresponding to the

folder number to start playing the first file in the

selected folder.

To skip 10 files* forwards

to the last file

To skip 10 files* backwards

to the first file

* The first time you press +10 or –10 button,

the file skips to the nearest higher or lower

file with a file number of multiple ten (ex.

10th, 20th, 30th).

Then each time you press the button, you can

skip 10 files (see “How to use the +10 and

–10 buttons” below).

• To select a folder number from 01 – 06:

Press 1 (7) – 6 (12) briefly.

• To select a folder number from 07 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Notes:

• After the last file, the first file will be selected,

and vice versa.

• If “MP3” flashes on the display after you have

selected a folder, it means that the folder does not

contain any MP3 files.

How to use the +10 and –10 buttons

• You cannot directly select a folder with a number

greater than 12.

• Ex. 1: To select file number 32 while playing

file number 6

To select a particular file in a folder, press

or 4

after selecting the folder.

(Three times)

(Twice)

To skip to the next or previous folder

File 6

\ 10 \ 20 \ 30 \ 31 \ 32

• Ex. 2 :To select file number 8 while playing

Press 5 (up) while playing an

MP3 disc to skip to the next

folder.

file number 36

Each time you press the button

consecutively, the next folder is

located (and the first file in the

folder starts playing, if recorded).

(Three times)

(Twice)

File 36

\ 30 \ 20 \ 10 \ 9 \ 8

Press ∞ (down) while playing an

MP3 disc to skip back to the

previous folder.

To go to a particular folder directly

Each time you press the button

consecutively, the previous

folder is located (and the first file

in the folder starts playing, if

recorded).

IMPORTANT:

To directly select the folders using the number

button(s), it is required that folders are

assigned 2 digit numbers at the beginning of

their folder names. (This can only be done

during the recording of CD-Rs or CD-RWs.)

Ex.: If folder name is “01 ABC”

= Press 1 to go to Folder 01 ABC.

If folder name is “1 ABC,” pressing 1

does not work.

Note:

If the folder does not contain any MP3 files, it is

skipped.

If folder name is “12 ABC”

= Press and hold 6 (12) to go to Folder

12 ABC.

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back files repeatedly

(Track Repeat/Folder Repeat Play)

You can play back the current file or all the files

in the current folder repeatedly.

Selecting MP3 playback

modes

To play back files at random

(Folder Random/Disc Random Play)

You can play back all files of the current folder or

all files on the MP3 disc at random.

1 Press MODE to enter the functions

mode while playing an MP3 disc.

“MODE” flashes on the upper part

of the display.

1 Press MODE to enter the functions

mode while playing an MP3 disc.

“MODE” flashes on the upper part

of the display.

2 Press RPT (repeat), while “MODE”

is still flashing on the display, so

that “TRK RPT” or “FLDR RPT”

appears on the display.

2 Press RND (random), while

“MODE” is still flashing on the

display, so that “FLDR RND” or

“DISC RND” appears on the display.

Each time you press the button, the

random play mode changes as

follows:

Each time you press the button, the

repeat play mode changes as

follows:

TRK RPT

FLDR RPT

Canceled

FLDR RND

DISC RND

Canceled

RPT indicator

Ex.: When you select “TRK RPT”

Active

indicator

(folder) and RND indicators

Mode

Plays repeatedly

Ex.: When you select “FLDR RND”

TRK RPT RPT indicator The current (or

lights up.

specified) file.

Active

indicator

Mode

Plays at random

FLDR RPT

and RPT All files of the

indicators

light up.

current (or

specified) folder.

FLDR RND

DISC RND

and RND All files of the

indicators

light up.

current folder, then

files of the next

folder and so on.

and RND All files on the disc.

indicators

light up.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

Selecting preset sound modes

Indication

For:

Preset values

BAS TRE LOUD

(C-EQ: custom equalizer)

USER

ROCK

(Flat sound)

OFF

You can select a preset sound mode (C-EQ:

custom equalizer) suitable to the music genre.

Rock or

disco music

+03

+01

CLASSIC Classical

music

+01

–02

OFF

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

POPS

Light music

+04

+02

+01

OFF

HIP HOP Funk or rap

music

1 Press MODE to enter the functions

mode.

JAZZ

Jazz music

+02

+03

OFF

“MODE” flashes on the upper

part of the display.

Note:

You can adjust each sound mode to your preference.

Once you make an adjustment, it is automatically

stored for the currently selected sound mode. See

“Adjusting the sound” on page 31.

2 Press EQ (equalizer) while “MODE”

is still flashing on the display.

The last selected sound

mode is recalled and applied

to the current source.

Sound mode indicator flashes.

Ex.: If you have selected “USER” previously

3 Select the sound mode you want.

Each time you press the

button, the sound modes

change as follows:

USER

JAZZ

ROCK

CLASSIC

POPS

HIP HOP

Sound mode indicator flashes.

Ex.: When you select “ROCK”

Download from Www.Somanuals.com. All Manuals Search And Download.

When you adjust the bass, treble, or loudness, the

adjustment you have made is stored for the

currently selected sound mode (C-EQ) including

“USER.”

Adjusting the sound

You can adjust the sound characteristics to your

preference.

If you are using a two-speaker system, set the fader

level to “00.”

This takes effect only when a subwoofer is

connected.

Normally the control dial work as the volume

control. So you do not have to select “VOL” to

adjust the volume level.

1 Select the item you want to adjust.

Each time you press the

button, the adjustable items

change as follows:

BAS

TRE

FAD

BAL

(bass)

(treble)

(fader)

(balance)

2 Adjust the setting.

VOL

WOOFER

(subwoofer)

LOUD

To increase the level or

(volume)

(loudness)

turn on the loudness

Indication

BAS*¹

To do:

Range

To decrease the level or

turn off the loudness

Adjust the bass. –06 (min.)

+06 (max.)

TRE*¹

FAD*²

BAL

Adjust the treble. –06 (min.)

+06 (max.)

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

Equalization pattern changes as you

adjust the bass or treble.

Ex. 1: When you adjust “TRE” (treble)

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

LOUD*¹

Boost low and

high frequencies

to produce a well-

balanced sound

at low volume

level.

LOUD ON

Ex. 2: When you turn on the loudness

LOUD OFF

3 Repeat steps 1 and 2 to adjust the

other items.

WOOFER*³Adjust the

subwoofer

0 (min.)

output level.

8 (max.)

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

page 30.

VOL*⁴

Adjust the volume. 00 (min.)

50 (max.)

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER MAIN FUNCTIONS

Changing the general settings

(PSM)

3 Adjust the PSM item selected.

You can change the items listed in the table

below and on page 33 by using the PSM

(Preferred Setting Mode) control.

Basic Procedure

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See pages 32 and 33.)

5 Finish the setting.

2 Select the PSM item you want to

adjust. (See pages 32 and 33.)

Preferred Setting Mode (PSM) items

• For detailed operations of each PSM items, refer to the pages listed in the table.

Factory-preset See

Indications

Selectable values/items

settings

page

CLOCK H

CLOCK M

24H/12H

Hour adjustment

Back

12H

Advance

24H

0:00

Minute adjustment

24/12-hour time display

24H

AUTO ADJ Automatic clock setting

OFF

CLOCK

TU DISP

AF-REG

Clock display

Tuner display mode

PS NAME

FREQ

PS NAME

AF REG

Alternative frequency/

Regionalization reception

OFF*¹

Displayed only when the “DAB AF” is set to “OFF.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Factory-preset See

Indications

Selectable values/items

settings

page

29 programme types

PTY STBY PTY standby

OFF

(see page 19)

TA VOL

Traffic announcement

volume

VOL 00 – VOL 50

VOL 20

OFF

P-SEARCH Programme search

OFF

DAB AF*²

Alternative frequency

AF OFF

AF ON

VOL 00

DAB VOL*²DAB volume adjustment

VOL –12

AUDIO 1

VOL 12

AUDIO 2

LEVEL

DIMMER

TEL

Level display

AUDIO 2

AUTO

OFF

Dimmer mode

Telephone muting

AUTO

OFF

MUTING 1

MUTING 2

OFF

BEEP

Key-touch tone

Scroll mode

OFF

SCROLL

ONCE

AUTO

ONCE

EXT IN*³

AUX ADJ

TAG DISP

External component

Auxiliary adjustment

Tag display

CHANGER

LINE IN

CHANGER

A. ADJ 00

TAG ON

A. ADJ 00 – A. ADJ 05

TAG OFF TAG ON

Displayed only when the DAB tuner is connected.

Displayed only when one of the following sources is selected—FM, AM, and CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

To set the clock display—CLOCK

To select the level meter—LEVEL

You can set the clock to be shown on the display

when the unit is turned on.

You can select the level display according to your

preference.

When shipped from the factory, the clock is set to

be shown on the display.

When shipped from the factory, “AUDIO 2” is

selected.

• ON:

• OFF:

Clock display is turned on.

• AUDIO 1: Shows the audio level indicator.

• AUDIO 2: Alternates “AUDIO 1” setting and

illumination display.

Clock display is turned off. When

“OFF” is selected, the current

source name, station band, or disc

number appears instead of the

clock display (except when “LINE

IN” is selected as the source).

• OFF:

Erases the audio level indicator.

To select the dimmer mode—DIMMER

When you turn on the car headlights, the display

automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer

mode is activated.

When CLOCK is set to OFF:

Current

Source

Pressing DISP (display)

indication

• AUTO:

• OFF:

• ON:

Activates Auto Dimmer.

Cancels Auto Dimmer.

Always dims the display.

Tuner

Band

Clock appears for about

5 seconds.

CD and “CD” or

CD-CH disc number

Note:

Auto Dimmer equipped with this unit may not work

correctly on some vehicles, particularly on those

having a control dial for dimming.

When CLOCK is set to ON:

Current

In this case, set the dimmer mode to “ON” or “OFF.”

Source

Pressing DISP (display)

indication

Tuner

Clock

Band appears for about

5 seconds.

To select the telephone muting—TEL

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2”

whichever mutes the sounds from this unit.

When shipped from the factory, this mode is

deactivated.

CD and Clock

CD-CH

“CD” or disc number

and track/file number

appear alternately

each time you press the

button.

• MUTING 1: Select this if this setting can mute

the sounds.

• MUTING 2: Select this if this setting can mute

the sounds.

• OFF:

Cancels the telephone muting.

Download from Www.Somanuals.com. All Manuals Search And Download.

To turn on/off the key-touch tone—BEEP

To adjust the auxiliary input level

—AUX ADJ

Adjust the auxiliary input level properly when an

external component is connected to the AUX

input jack.

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

When shipped from the factory, the key-touch

tone is activated.

When shipped from the factory, the auxiliary

input level is set at level “00.”

• ON:

• OFF:

Activates the key-touch tone.

Deactivates the key-touch tone.

If the input level of the connected component is

not high enough, increase the input level

properly. Without adjusting the line input level,

you may be surprised at a loud sound when you

change the source from the external component

to another source.

To select the scroll mode—SCROLL

You can select the scroll mode for the disc

information (when the entire text cannot be

shown at once).

When shipped from the factory, scroll mode is set

to “ONCE.”

To turn the tag display on or off

—TAG DISP

An MP3 file can contain file information called

“ID3 Tag” where its album name, performer, track

title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1)

and ID3v2 (ID3 Tag version 2). This unit is

compatible only with ID3v1.

When shipped from the factory, “TAG ON” is

selected.

• ONCE:

• AUTO:

Scrolls only once.

Repeats the scroll (5-second

intervals in between).

Cancels scroll mode.

• OFF:

Note:

Even if the scroll mode is set to “OFF,” you can scroll

the display by pressing DISP (display) for more than

one second.

• TAG ON:

Turns on the ID3 tag display while

playing MP3 files.

• If an MP3 file does not have ID3

tags, folder name and file

name appear.

To select the external component to use

—EXT IN

You can connect the external component to the

CD changer jack on the rear using the Line Input

Adapter KS-U57 (not supplied).

To use the external component as the playback

source through this unit, you need to select

which component—CD changer or external

component—to use.

Note:

If you change the setting from

“TAG OFF” to “TAG ON” while

playing an MP3 file, the tag display

will be activated when the next file

starts playing.

When shipped from the factory, CD changer is

selected as the external component.

• TAG OFF: Turns off the ID3 tag display while

playing MP3 files. (Only the folder

name and file name can be

shown.)

• CHANGER: To use the CD changer.

• LINE IN:

To use the external component

other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

Download from Www.Somanuals.com. All Manuals Search And Download.

Assigning names to the source

4 Move the cursor to the next

(or previous) character position.

You can assign names to CDs (both in this unit

and in the CD changer).

After assigning a name, it will appears on the

display when you select the source.

Maximum number of

Source

characters

5 Repeat steps 3 and 4 until you

CDs*

Up to 32 characters (up to

40 discs)

finish entering the name.

6 Finish the procedure while the last

* You cannot assign a name to a CD Text or an MP3

disc.

selected character is flashing.

1 Select a source you want to assign a

name to.

CD-CH

To erase the entered characters

Insert spaces using the same procedure

described on the left column.

When you select a source, the power

automatically comes on.

Available characters

2 While pressing DISP (display), press

and hold SEL (select) for more than

2 seconds.

–

space

Notes:

• When you try to assign a name to the 41st disc,

“NAME FULL” appears on the display. (In this

case, delete unwanted names before assignment.)

• When the CD changer is connected, you can assign

names to CDs in the CD changer. These names can

also be shown on the display if you insert the CDs

in this unit.

• When the power supply to the memory circuit is

interrupted (for example, during battery

replacement), all the preset settings are erased. If

this occurs, reset the unit (see page 2). Then, assign

names to the sources again.

Ex.: When you select CD as the source

3 Select a character.

• See right column for

available characters.

Download from Www.Somanuals.com. All Manuals Search And Download.

Attaching the control panel

Detaching the control panel

1 Insert the right side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the left side of the control

panel to fix it to the panel holder.

2 Pull the control panel out of the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

Download from Www.Somanuals.com. All Manuals Search And Download.

CD CHANGER OPERATIONS

We recommend that you use the JVC MP3-

* If you have changed “EXT IN” setting to “LINE IN”

compatible CD changer with your unit.

(see page 35), you cannot select the CD changer.

• When the current disc is an MP3 disc:

Playback starts from the first folder of the

current disc once file check is completed.

By using this CD changer, you can play back

your original CD-Rs (Recordable) and CD-RWs

(Rewritable) recorded either in audio CD format

or in MP3 format.

Selected disc number**

• You can also connect other CH-X series

CD changers (except CH-X99 and CH-X100).

However, they are not compatible with MP3

discs, so you cannot play back MP3 discs.

• You cannot use the KD-MK series CD

changers with this unit.

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “NO DISC” will appear on the display.

If this happens, remove the magazine and

set the discs correctly.

• If no magazine is loaded in the CD changer,

“NO MAG” appears on the display. If this

happens, insert the magazine in the CD

changer.

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

(folder) indicator

MP3 indicator

**When “CLOCK” is set to “ON” (see page 34),

the current indication will soon change to the

clock time.

Playing discs

Note:

Folder name appears on the display instead of

“ROOT,” if an MP3 disc contains a folder.

Select the CD changer (CD-CH).

CD-CH*

Download from Www.Somanuals.com. All Manuals Search And Download.

• When the current disc is a CD:

Playback starts from the first track of the

current disc.

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the CD

changer is playing).

Selected disc number*

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than

one second.

Current track

number

To fast-forward or reverse the track/file

Elapsed playing time

Press and hold ¢

during play, to fast-

forward the track/file.

Press and hold 4

the track/file.

, during play, to reverse

* When “CLOCK” is set to “ON” (see page 34),

the current indication will soon change to the

clock time.

To go to the next or previous tracks/files

Notes:

Press ¢

briefly

• When you press CD CD-CH (AUX), the power

automatically comes on. You do not have to press

to turn on the power.

• If you change the source, CD changer play also

stops. Next time you select the CD changer as the

source, CD changer play starts from where

playback has been stopped previously.

• When you start playing back a CD Text or MP3

disc, disc information will automatically appear on

the display. (See pages 23 and 27.)

during play, to skip ahead

to the beginning of the

next track/file.

Each time you press the

button consecutively, the

beginning of the next

tracks/files is located and

played back.

Press 4

briefly during play, to skip back to

the beginning of the current track/file.

Each time you press the button consecutively,

the beginning of the previous tracks/files is

located and played back.

Download from Www.Somanuals.com. All Manuals Search And Download.

To skip to the next or previous folder

(only for MP3 discs)

This operation is only possible when

using JVC MP3-compatible CD changer

(CH-X1500).

Press 5 (up) while playing an

MP3 disc, to go to the next folder.

Each time you press the button

consecutively, the next folder is

located, and the first file in the

folder starts playback.

To go to a track/file quickly (+10 and –10

buttons)

1 Press MODE to enter the functions mode

while playing a disc.

“MODE” flashes on the upper

part of the display.

Press ∞ (down) while playing an

MP3 disc, to go to the previous

folder.

Each time you press the button

consecutively, the previous folder

is located, and the first file in the

folder starts playback.

2 Press +10 or –10.

To skip 10 tracks/files*

forwards to the last track/file

To skip 10 tracks/files*

backwards to the first track/file

To show the disc information for CD Text

and MP3 discs

This is possible only when connecting a JVC CD

changer equipped with CD Text and/or MP3 disc

information reading capability.

* The first time you press +10 or –10 button,

the track/file skips to the nearest higher or

lower track/file with a track/file number of

multiple ten (ex. 10th, 20th, 30th).

Then each time you press the button, you can

skip 10 tracks/files (see “How to use the +10

and –10 buttons” below).

Select text display mode while playing a

CD Text or an MP3 disc.

• After the last track/file, the first track/file will

be selected, and vice versa.

Note:

If the current playing disc is an MP3 disc, files are

skipped within the same folder.

• For details, see page 23 about CD Text disc

information and page 27 about MP3 disc

information.

How to use the +10 and –10 buttons

• Ex. 1: To select track/file number 32 while

playing track/file number 6

(Three times)

(Twice)

Track/File 6 \ 10 \ 20 \ 30 \ 31 \ 32

• Ex. 2 :To select track/file number 8 while

playing track/file number 36

(Three times)

(Twice)

Track/File 36\ 30 \ 20 \ 10 \ 9 \ 8

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back tracks/files repeatedly

(Track Repeat/Folder Repeat/Disc Repeat

Play)

Selecting the playback modes

To play back tracks/files at random

(Folder Random/Disc Random/Magazine

Random Play)

1 Press MODE to enter the functions

mode during play.

“MODE” flashes on the upper part

of the display.

1 Press MODE to enter the functions

mode during play.

“MODE” flashes on the upper part

of the display.

2 Press RPT (repeat), while “MODE”

is still flashing on the display.

Each time you press the button, the

repeat play mode changes as

follows:

2 Press RND (random), while

“MODE” is still flashing on the

display.

For MP3 discs:

Each time you press the button, the

random play mode changes as

follows:

TRK RPT

FLDR RPT

DISC RPT

Canceled

For MP3 discs:

For CDs:

FLDR RND

DISC RND

MAG RND

TRK RPT

DISC RPT

Canceled

For CDs:

DISC RND

MAG RND

Canceled

(disc) and RPT indicators

Ex.: When you select “DISC RPT”

RND indicator

Ex.: When you select “MAG RND”

Note:

The MP3 indicator also lights up if the current playing

disc is an MP3 disc.

Note:

The MP3 indicator also lights up if the current playing

disc is an MP3 disc.

Active

indicator

Mode

Plays repeatedly

Active

TRK RPT

RPT indicator The current (or

Mode

Plays at random

indicator

and RND All files of the

indicators current folder, then

light up.

lights up.

and RPT

indicators

light up.

specified) track/

file.

FLDR RND*

FLDR RPT*

All files of the

current (or

files of the next

folder and so on.

specified) folder of

the current disc.

DISC RND

and RND All tracks/files of

indicators

light up.

the current (or

specified) disc.

DISC RPT

and RPT All tracks/files of

indicators light the current (or

up.

specified) disc.

MAG RND RND indicator All tracks/files of

lights up. the inserted discs.

* “FLDR RPT” is only applicable for MP3 discs.

* “FLDR RND” is only applicable for MP3 discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL COMPONENT OPERATIONS

*Not compatible with

digital signals.

Portable MD player, etc.

Auxiliary input

(AUX)*

• If “LINE IN”* does not appear on the display,

see page 35 and select the external input

(“LINE IN”).

* Displayed only when one of the following sources is

selected—FM, AM, and CD.

Playing an external component

You can connect two external components to this

unit.

Connect one to the CD changer jack on the rear

using the Line Input Adapter KS-U57 (not

supplied), and the other to the AUX (auxiliary)

input jack on the control panel.

To select “AUX IN” (component connected

to the AUX jack on the control panel),

press and hold CD CD-CH (AUX).

Preparations:

• For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

• Before operating the external component using the

following procedure, select the external input

correctly. (See “To select the external component to

use—EXT IN” on page 35.)

• If the input level of the external component

connected to the AUX input jack is not high enough,

increase the input level properly. (See “To adjust

the auxiliary input level—AUX ADJ” on page 35.)

Note on One-Touch Operation:

When you press CD CD-CH (AUX), the power

automatically comes on. You do not have to press

to turn on the power.

1 Select the external component

(LINE IN or AUX IN).

2 Turn on the connected component

To select “LINE IN” (component

connected to the CD changer jack on the

rear), press CD CD-CH (AUX) repeatedly.

and start playing the source.

3 Adjust the volume.

LINE IN*

4 Adjust the sound characteristics

you want. (See pages 30 and 31.)

Download from Www.Somanuals.com. All Manuals Search And Download.

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio

Broadcasting) tuner KT-DB1500 or KT-DB1000

with your unit.

If you have another DAB tuner, consult your JVC

IN-CAR ENTERTAINMENT dealer.

• Refer also to the Instructions supplied with

your DAB tuner.

Tuning in to an ensemble and

one of the services

A typical ensemble has 6 or more programmes

(services) broadcast at the same time. After

tuning in to an ensemble, you can select a

service you want to listen to.

Before you start....

Press FM/AM (DAB) briefly if CD, CD changer, or

external component is the current source.

What is DAB system?

DAB is one of the digital radio broadcasting

systems available today. It can deliver CD

quality sound without any annoying

interference and signal distortion.

Furthermore, it can carry text, pictures, and

data.

In contrast to FM broadcast, where each

programme is transmitted on its own

frequency, DAB combines several

programmes (called “services”) to form one

“ensemble.”

1 Select the DAB tuner.

Each time you press and

hold the button, the DAB

tuner and the FM/AM tuner

are alternately selected.

DAB

FM/AM

2 Select the DAB band (DAB1, DAB2,

or DAB3).

In addition, each “service”—called “primary

service”—can also be divided into its

components (called “secondary service”).

Each time you press the

button, the DAB band

changes as follows:

With the DAB tuner connected with this unit,

you can enjoy these DAB services.

DAB 1

(D1)

DAB 2

(D2)

DAB 3

(D3)

Note:

When reception switches between DAB and FM, the

listening volume level may increase or decrease

inconveniently. This change in the volume level results

from unequal audio injection levels at broadcaster

site, but not from the malfunction of this unit.

To prevent this inconvenience, you can adjust the DAB

volume level. (See “To adjust the DAB volume level”

on page 46.)

Note:

This receiver has three DAB bands (DAB1,

DAB2, DAB3). You can use any of them to tune

in to an ensemble.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

To tune in to a particular ensemble

without searching

3 Start searching for an ensemble.

Press ¢

search for ensembles

of higher frequency.

Before you start....

Press FM/AM (DAB) briefly if CD, CD changer, or

external component is the current source.

1 Press and hold FM/AM (DAB) to select DAB

tuner as the source.

2 Press FM/AM (DAB) repeatedly to select the

DAB band (DAB1, DAB2, or DAB3).

Press 4

lower frequency.

to search for ensembles of

When an ensemble is received, searching

stops.

3 Press and hold ¢

or 4

for more

than one second.

4 Press ¢

or 4

repeatedly until the

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

ensemble you want is reached.

• If you hold down the button, the frequency

keeps changing until you release the

button.

4 Select a service (either primary or

5 Press 5 (up) or ∞ (down) to select a service

(either primary or secondary) you want to

listen to.

secondary) you want to listen to.

Press 5 (up) to select the

next service. (If a primary

service has some

secondary services, they

are selected before the next

primary service is selected.)

To restore the FM/AM tuner

Press and hold FM/AM (DAB) again.

Storing DAB services in

memory

Press ∞ (down) to select

the previous service (either

primary or secondary).

You can preset up to 6 DAB services in each

DAB band (DAB1, DAB2, and DAB3) manually.

To change the display information while

tuning in to an ensemble

Normally service name is shown on the display.

If you want to check the ensemble name or its

frequency, press DISP (display).

Before you start....

Press FM/AM (DAB) briefly if CD, CD changer, or

external component is the current source.

1 Select the DAB tuner.

Each time you press and

hold the button, the DAB

tuner and the FM/AM tuner

are alternately selected.

Each time you press the button,

the following information appears

for a while on the display.

Service name

DAB

FM/AM

Ensemble name

Channel number

Frequency

2 Select the DAB band (DAB1, DAB2,

or DAB3) you want.

Each time you press the

button, the DAB band

changes as follows:

DAB 1

(D1)

DAB 2

(D2)

DAB 3

(D3)

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning in to a preset DAB

service

3 Tune in to an ensemble you want.

You can easily tune in to a preset DAB service.

Remember that you must store services first. If

you have not stored them yet, “Storing DAB

services in memory” on pages 44 and 45.

4 Select a service of the ensemble you

want to listen to.

Before you start....

Press FM/AM (DAB) briefly if CD, CD changer, or

external component is the current source.

Press 5 (up) to select the

next service.

1 Select the DAB tuner.

Each time you press and

hold the button, the DAB

tuner and the FM/AM tuner

are alternately selected.

Press ∞ (down) to select

the previous service.

DAB

FM/AM

5 Press and hold the number button

(in this example, 1) you want to store

the selected service into for more

than 2 seconds.

2 Select the DAB band (DAB1, DAB2,

or DAB3) you want.

Each time you press the

button, the DAB band

changes as follows:

Selected band/preset number and “MEMO”

(memory) appear alternately for a while.

DAB 1

(D1)

DAB 2

(D2)

DAB 3

(D3)

3 Select the number (1 – 6) for the

preset DAB service (primary) you

want.

6 Repeat the above procedure to store

other DAB services into other preset

numbers.

Notes:

• You can only preset primary DAB services. If you

store a secondary service, its primary service will

be stored instead.

• A previously preset DAB service is erased when a

new DAB service is stored in the same preset

number.

Note:

If the selected primary service has some secondary

services, pressing the same number button repeatedly

will tune in to the secondary services.

• Preset DAB services are erased when the power

supply to the memory circuit is interrupted (for

example, during battery replacement). If this

occurs, preset the DAB services again.

Download from Www.Somanuals.com. All Manuals Search And Download.

To adjust the DAB volume level

What you can do more with

DAB

You can adjust the volume level of DAB tuner

and store it in memory. By adjusting the volume

level properly to match it to the FM sound level,

you will not need to adjust the volume level each

time you change the source.

Tracing the same program automatically

(Alternative Reception)

When shipped from the factory, DAB volume

level is set at “00.”

• See also “Changing the general settings

(PSM)” on page 32.

You can keep listening to the same program.

• While receiving a DAB service:

When driving in an area where a service

cannot be received, this unit automatically

tunes in to another ensemble or FM RDS

station, broadcasting the same program.

• While receiving an FM RDS station:

When driving in an area where a DAB service

is broadcasting the same program as the

FM RDS station is broadcasting, this unit

automatically tunes in to the DAB service.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

or 4

to select “DAB VOL”

(volume).

3 Turn the control dial to set to the desired

volume.

You can set it from “VOL –12” to “VOL 12.”

4 Press SEL (select) to finish the setting.

To use Alternative Reception

When shipped from the factory, Alternative

Reception is activated.

• See also “Changing the general settings

(PSM)” on page 32.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

or 4

(alternative frequency).

to select “DAB AF”

3 Turn the control dial to select the desired

mode.

• AF ON: Traces the program among DAB

services and FM RDS stations

—Alternative Reception. The AF

indicator lights up on the display

(see page 13).

• AF OFF: Alternative Reception is

deactivated.

4 Press SEL (select) to finish the setting.

Note:

When Alternative Reception (for DAB services) is

activated, Network-Tracking Reception (for RDS

stations: see page 13) is also activated automatically.

On the other hand, Network-Tracking Reception

cannot be deactivated without deactivating

Alternative Reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the

minimum level.

Adjust it to the optimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work

at all.

The built-in microcomputer may

have functioned incorrectly due

to noise, etc.

While holding SEL (select),

press

(standby/on/

attenuator) for more than

2 seconds to reset the unit. (The

clock setting and preset stations

stored in memory are erased.)

(See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does

not work.

Signals are too weak.

Store stations manually.

• Static noise while

listening to the radio.

The aerial is not connected

firmly.

Connect the aerial firmly.

Insert the disc correctly.

• Disc automatically ejects. Disc is inserted upside down.

• CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.

• Insert a finalized CD-R/

CD-RW.

• Finalize the CD-R/CD-RW

with the component which

you used for recording.

played back.

• Tracks on the CD-R/

CD-RW cannot be

skipped.

• Disc cannot be ejected.

Disc is locked.

Unlock the disc.

(See page 23.)

• Disc sound is sometimes You are driving on rough roads.

interrupted.

Stop playback while driving on

rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and

connections.

• “NO DISC” appears on

the display.

No disc in the loading slot.

Disc is inserted incorrectly.

Insert a disc into the loading

slot.

Insert the disc correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

Causes

Remedies

• Disc cannot be played

back.

No MP3 files are recorded on Change the disc.

the disc.

MP3 files do not have the

Add the extension code

extension code—mp3 in their —mp3 to their file names.

file names.

MP3 files are not recorded in

Change the disc.

the format compliant with ISO (Record MP3 files using a

9660 Level 1, Level 2, or

Joliet.

compliant application.)

• Noise is generated.

The file played back is not an Skip to another file or change

MP3 file (although it has the

extension code—mp3).

the disc. (Do not add the

extension code—mp3 to non-

MP3 files.)

• A longer readout time is

required (“CHECK” keeps

flashing on the display).

Readout time varies due to

the complexity of the folder/file and folders. Also, do not record

configuration.

Do not use too many hierarchies

any other types of audio tracks

together with MP3 files.

• Files cannot be played back Playback order is determined

as you have intended them when the files are recorded.

to play.

• Elapsed playing time is not This sometimes occurs during

correct.

play. This is caused by how

the files are recorded on the

disc.

• “MP3” flashes on the

display.

The current folder does not

contain any MP3 file.

Select another folder.

• “NO FILES” appears on the The current disc does not

Insert a disc that contains MP3

files.

display.

contain any MP3 file.

• Correct characters are not

displayed (e.g. album

name).

This unit can only display

alphabets (capital: A–Z),

numbers, and a limited

number of symbols.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

Causes

Remedies

• “NO DISC” appears on the

display.

No disc is in the magazine.

Insert discs into the

magazine.

Discs are inserted upside down.

Insert discs correctly.

Insert the magazine.

• “NO MAG” appears on the

display.

No magazine is loaded in the

CD changer.

• “RESET 8” appears on the

display.

This unit is not connected to the

CD changer correctly.

Connect this unit and the

CD changer correctly and

press the reset button of the

CD changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the

CD changer.

• The CD changer does not

work at all.

The built-in microcomputer may

function incorrectly due to

noise, etc.

While holding SEL (select),

press

(standby/on/

attenuator) for more than

2 seconds to reset the unit.

(The clock setting and preset

stations stored in memory

are erased.) (See page 2.)

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,

but will be annoying.

We recommend that you stop disc play while driving on such rough roads.

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

Handling discs

When playing a CD-R or CD-RW

Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

• Use only “finalized” CD-Rs or CD-RWs.

• Some CD-Rs or CD-RWs may not play back on

this unit because of their disc characteristics,

and for the following reasons:

This unit has been designed to reproduce CDs,

CD-Rs (Recordable), CD-RWs (Rewritable), and

CD Texts.

• This unit is also compatible with MP3 discs.

– Discs are dirty or scratched.

– Moisture condensation on the lens inside the

unit.

– The pickup lens inside the unit is dirty.

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower than

that of regular CDs.

• CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity, so do not leave

them inside your car.

• Do not use following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly printed

by an ink jet printer.

How to handle discs

When removing a disc

from its case, press down

the center holder of the case

and lift the disc out, holding

it by the edges.

Center holder

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

To keep discs clean

Using these discs under high temperatures or

high humidity may cause malfunctions or

damage to discs. For example,

– Stickers or labels may shrink and warp a

disc.

– Stickers or labels may peel off so discs

cannot be ejected.

– Print on discs may get sticky.

A dirty disc may not play correctly.

If a disc does become dirty, wipe it

with a soft cloth in a straight line

from center to edge.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

unit may reject the disc.

To remove these rough spots, rub

the edges with a pencil or ball-point pen, etc.

Read instructions or cautions about labels and

printable discs carefully.

CAUTIONS:

• Do not insert 8 cm discs (single CDs) into the

loading slot. (Such discs cannot be ejected.)

• Do not insert any disc of unusual shape—like a

heart or flower; otherwise, it will cause a

malfunction.

• Do not expose discs to direct sunlight or any

heat source or place them in a place subject to

high temperature and humidity. Do not leave

them in a car.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and leave

the unit turned on for a few hours until the

moisture evaporates.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean discs.

Sticker

Stick-on

label

Warped

disc

Sticker

Disc

residue

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Front:

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 decoding format:

Rear:

MPEG1/2 Audio Layer 3

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Max. Bit Rate: 320 Kbps

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

GENERAL

Power Requirement:

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Auxiliary input jack:

Operating Voltage:

DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

3.5 mm dia. stereo mini jack (analog)

Line-Out Level/Impedance:

4.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Subwoofer-Out Level/Impedance:

2.0 V/20 kΩ load (full scale)

Cut off frequency: 120Hz (fixed)

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

188 mm × 58 mm × 12 mm

Mass (approx.):

1.4 kg (excluding accessories)

TUNER SECTION

Frequency Range:

FM:

AM:

87.5 MHz to 108.0 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

Design and specifications are subject to change

without notice.

[FM Tuner]

Usable Sensitivity:

11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Download from Www.Somanuals.com. All Manuals Search And Download.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

0103KKSMDTJEIN

EN, GE, FR, NL

Download from Www.Somanuals.com. All Manuals Search And Download.

KD-SX998R/KD-SX997R

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

GET0125-004A

[E/EX]

0103KKSMDTJEIN

EN, GE, FR, NL

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems.

• Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

• Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE.

• Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met negatieve

aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical installation. • Die folgende Abbildung zeigt einen typischen

• L’illustration suivante est un exemple d’installation

typique. Cependant, vous devez faire les

ajustements correspondant à votre voiture

particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation,

consulter votre revendeur d’autoradios JVC ou une

compagnie d’approvisionnement.

• Op de volgende afbeelding kunt u zien hoe de installatie,

However, you should make adjustments

corresponding to your specific car. If you have any

questions or require information regarding

installation kits, consult your JVC IN-CAR

ENTERTAINMENT dealer or a company supplying

kits.

Einbau. Dennoch müssen Sie entsprechend Ihrem

jeweiligen Auto Anpassungen vornehmen. Bei

irgendwelchen Fragen oder wenn Sie Informationen

hinsichtlich des Einbausatzes brauchen, wenden

Sie sich an ihren JVC Autoradiohändler oder ein

Unternehmen das diese Einbausätze vertreibt.

normaal gesproken, in zijn werk gaat. U moet echter bij

de installatie rekening houden met de bijzonderheden

van uw eigen auto. Neem bij vragen of voor meer

bijzonderheden over inbouwpakketten contact op met uw

JVC car audio dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

1 Before mounting: Press

(control panel

release button) to detach the control panel if

already attached.

1 Vor dem Einbau: Drücken Sie

(Freigabe der 1 Avant le montage: Appuyer sur

(déblocage

du panneau de commande) pour éventeullement

détacher le panneau de commande.

1 Voordat u aan de montage van het apparaat

Schalttafel), um die Arretierung der Schalttafel zu

lösen, sofern diese bereits angebracht ist.

begint: Druk op

(het bedieningspaneel

vrijgeven) als u het bedieningspaneel wilt

loskoppelen indien dit aan de eenheid is

vastgekoppeld.

* When shipped from the factory, the control

panel is packed in the hard case.

* Bei der Auslieferung ab Werk ist die Schalttafel

im Etui verpackt.

* Lorsque ce panneau de commande sort d’usine,

il est rangé dans un étui de transport.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpackt meegeleverd.

2 Den Frontrahmen herausnehmen.

2 Retirer la plaque d’assemblage.

2 Remove the trim plate.

3 Die Halterung nach dem Entriegeln der

3 Libérer les verrous du manchon et retirer le manchon.

1 Poser l’appareil à la verticale.

3 Remove the sleeve after disengaging the sleeve

2 Verwijder de sierplaat.

Halterungensperren abnehmen.

locks.

3 Verwijder het huis nadat u de klemmen hebt

1 Das Gerät aufstellen.

1 Stand the unit.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

losgemaakt.

Hinweis: Beim Aufstellen des Geräts darauf

achten, daß die Sicherung auf der Rückseite

nicht beschädigt wird.

Note: When you stand the unit, be careful

not to damage the fuse on the rear.

1 Zet het apparaat rechtop.

Opmerking: Wanneer u het apparaat rechtop

zet, moet u erop letten dat u de zekering aan de

achterkant niet beschadigt.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé les

verrous de manchon.

2 Insert the 2 handles between the unit and

the sleeve, as illustrated, to disengage the

sleeve locks.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und die

Halterungensperren entriegeln.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

3 Retirer le manchon.

3 Remove the sleeve.

3 Die Halterung entfernen.

Remarque: S’assurer de garder les poignées

pour une utilisation ultérieur, après l’installation

de l’appareil.

Note: Be sure to keep the handles for future

use after installing the unit.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

3 Verwijder het huis.

4 Install the sleeve into the dashboard.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in de

toekomst kunt gebruiken.

4 Installer le manchon dans le tableau de bord.

* After the sleeve is correctly installed into the

dashboard, bend the appropriate tabs to hold

the sleeve firmly in place, as illustrated.

4 Die Halterung im Armaturenbrett einbauen.

* Après installation correcte du manchon dans le

tableau de bord, plier les bonnes pattes pour

maintenir fermement le manchon en place,

comme montré.

* Nach dem korrekten Einbau der Halterung im

Armaturenbrett, die entsprechenden Riegel

umknicken, um die Halterung an ihrem Platz zu

sichern, siehe Abbildung.

4 Installeer het huis in het dashboard.

* Nadat het huis op de juiste wijze in het dashboard

is geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

5 Fix the mounting bolt to the rear of the unit’s

body and place the rubber cushion over the end

of the bolt.

5 Monter le boulon de montage sur l’arrière du corps

de l’appareil puis passer l’amortisseur en

caoutchouc sur l’extrémité du boulon.

5 Die Befestigungsschraube an der Rückseite des

Gerätekörpers befestigen und das Ende der

Schraube mit einem Gummipuffer abdecken.

5 Maak de bevestigingsbout aan de achterkant van het

apparaat vast en plaats de rubberdop over het uiteinde

van de bout.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

8 Attach the trim plate.

6 Réalisez les connexions électriques.

6 Nehmen Sie die erforderlichen elektrischen

Anschlüsse vor.

6 Breng de vereiste elektrische verbindingen tot stand.

7 Schuif het apparaat in het huis totdat het vergrendeld is.

8 Bevestig een sierplaat.

7 Faire glisser l’appareil dans le manchon jusqu’à ce

qu’il soit verrouillé.

Note: Ensure the recessed part is at the bottom. 7 Das Gerät in die Halterung schieben, bis es einrastet.

If not, the control panel will not open completely.

8 Attachez la plaque d’assemblage.

8 Befestigen Sie den Frontrahmen.

9 Attach the control panel.

Remarque: Assurez-vous que la partie encastrée

est en bas. Sinon, le panneau de commande ne

pourra pas être ouvert complètement.

Hinweis: Vergewissern Sie sich, dass sich die

Opmerking: Zorg dat het ingedeukte gedeelte onder

is. Het bedieningspaneel kan anders namelijk niet

geheel worden geopend.

Aussparung an der Unterseite befindet. Ist dies

nicht der Fall, lässt sich die Bedienungsblende

nicht vollständig öffnen.

9 Remonter le panneau de commande.

9 Bevestig het bedieningspaneel.

9 Die Schalttafel anbringen.

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Rubber cushion

Gummipuffer

Amortisseur en

caoutchouc

Rubberdop

184 mm

Sleeve

Halterung

Manchon

53 mm

Handle

Griff

Poignée

Hendel

Huis

Mounting bolt

Befestigungsschraube

Boulon de montage

Bevestigingsbout

4 *

Slot

Schlitz

Fente

Fuse

Sicherung

Fusible

See “ELECTRICAL CONNECTIONS.”

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Sleuf

Zekering

Sleeve

Trim plate

Control panel

Halterung

Manchon

Huis

Frontrahmen

Plaque d’assemblage

Sierplaat

Schalttafel

Lock Plate

Arretierplättchen

Plaque de verrouillage

Panneau de commande

Bedieningspaneel

Zie “ELEKTRISCHE VERBINDINGEN”.

Vergrendelingsplaat

TROUBLESHOOTING

* Are the red and black leads connected correctly?

• Power cannot be turned on.

* Is the yellow lead connected?

FEHLERSUCHE

EN CAS DE DIFFICULTES

* Les fils rouge et noir sont-ils racordés

correctement?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

PROBLEMEN OPLOSSEN

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• Le fusible saute.

• De zekering slaat door.

* Zijn de rode en de zwarte draden op de juiste manier

aangesloten?

• Stromversorgung kann nicht eingeschaltet

werden.

* Ist die gelbe Leitung angeschlossen?

• Kein Ton aus den Lautsprechern.

Ist die Lautsprecherausgangsleitung kurzgeschlossen?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded • Ton verzerrt.

in common?

• Le son est déformé.

• Het geluid wordt vervormd.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• Unit becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded • Gerät wird heiß.

in common?

• L’appareil devient chaud.

• Het apparaat raakt verhit.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

Download from Www.Somanuals.com. All Manuals Search And Download.

• When using the optional stay

• When installing the unit without using the sleeve

• Beim Einbau des Geräts ohne Halterung

• Beim Verwenden der Anker-Option

• Lors de l’utilisation du hauban en option

• Wanneer u de steun gebruikt (facultatief)

• Lors de l’installation de l’appareil scans utiliser de manchon

• Wanneer u het apparaat zonder huis installeert

Stay (option)

Anker (Option)

Hauban (en option)

Steun (facultatief)

In a Toyota for example, first remove the car radio and install the unit in its place.

Fire wall

Feuerwand

Cloison

Washer

Unterlegscheibe

Rondelle

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

Brandscherm

Sluitring

Lock nut

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

* Not included with this unit.

* Nicht Teil dieses Geräts.

* Non fourni avec cet appareil.

* Niet meegeleverd.

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Bracket*

Konsole*

Support*

Console*

Screw (option)

Schraube (Option)

Vis (en option)

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Schroef (facultatief)

Sleeve

Pocket

Taschen

Poche

Zak

Halterung

Manchon

Huis

Bracket*

Konsole*

Support*

Console*

Mounting bolt

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Install the unit at an angle of less than

30˚.

Stellen Sie das Gerät mit einem Winkel Hinweis

von weniger als 30˚ auf.

Installez l’appareil avec un angle de

moins de 30˚.

Note

: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are

used, they could damage the unit.

: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet werden.

Werden längere Schrauben verwendet, können sie das Gerät beschädigen.

Less than 30˚

Weniger als 30˚

Moins de 30˚

Kleiner dan 30˚

Remarque : Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 6 mm.

Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Installeer het toestel met een hoek kleiner

dan 30˚.

Opmerking : Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als u langere

schroeven gebruikt, kan het apparaat worden beschadigd.

Removing the unit

^•1^BeR^foe^rm^eo^reve^mt^oh^veⁱⁿc^go^tn^htr^eo^ul ⁿpa^it,n^re^el.^{lease the rear section.}

Ausbau des Geräts

• Vor dem Ausbau des Geräts den hinteren Teil

Retrait de l’appareil

Verwijderen van het apparaat

• Voordat u het apparaat verwijdert, moet u het

1^acV^hte^er^rw^geij^dd^ee^er^lth^ee^lt^ob^se^md^aie^kn^eiⁿn^.gspaneel.

^•1^AvR^aeⁿt^tir^de^er ^rle^etp^ira^en^rn^l’e^aa^pu^pad^re^eic^l,o^lim^bém^rea^rnd^lae.^{section arrière.}

1^freD^ige^en^bS^ecⁿh^.alttafel abnehmen.

Remove the trim plate.

Retirer la plaque d’assemblage.

Den Frontrahmen herausnehmen.

Verwijder de sierplaat.

Insert the 2 handles into the slots, as shown.

Introduire les 2 poignées dans les fentes, comme

montré. Puis, tout en tirant doucement les

poignées écartées, faire glisser l’appareil pour le

sortir. (S’assurer de conserver les poignées

après l’installation de l’appareil.)

Then, while gently pulling the handles away from 3 Die 2 Griffe in die Schlitze wie gezeigt stecken.

Plaats de 2 hendels, zoals afgebeeld, in de sleuven.

Daarna duwt u de hendels zachtjes uit elkaar en kunt u

het apparaat naar buiten schuiven. (Bewaar de

hendels nadat u het apparaat hebt

geïnstalleerd!)

each other, slide out the unit. (Be sure to keep

Dann die Griffe behutsam auseinander ziehen

und das Gerät herausziehen. (Die Griffe nach

dem Einbau auf jeden Fall aufbewahren.)

the handles after installing it.)

Control panel

Trim plate

Schalttafel

Panneau de commande

Bedieningspaneel

Frontrahmen

Plaque d’assemblage

Sierplaat

Handle

Griff

Poignée

Hendel

Parts list for installation and

Teileliste für den Einbau und

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

connection

Anschluß

raccordement

installatie en aansluiting nodig hebt

De volgende onderdelen worden bij het apparaat geleverd.

Installeer ze op de juiste wijze, nadat u ze hebt

gecontroleerd.

The following parts are provided with this unit.

After checking them, please set them correctly.

Die folgenden Teile werden zusammen mit diesem

Gerät geliefert.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

Sleeve

Hard case/Control panel

Etui/Schalttafel

Etui de transport/Panneau

de commande

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Power cord

Stromkable

Cordon d’alimentation

Stroomkabel

Handles

Griffe

Poignées

Halterung

Manchon

Huis

Hendels

Behuizing/Bedieningspaneel

Washer (ø5)

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Battery

Batterie

Pile

Remote controller

Unterlegscheibe(ø5)

Rondelle (ø5)

Sluitring (ø5)

Sicherungsmutter (M5)

Ecrou d’arrêt (M5)

Contra-moer (M5)

Befestigungsschraube (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Bevestigingsbout (M5 x 20 mm)

Fernbedienung

Télécommande

Afstandsbediening

CR2025

Batterij

ELECTRICAL CONNECTIONS

ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN

To prevent short circuits, we recommend that you

Zur Vermeidung von Kurzschlüssen empfehlen wir,

Pour éviter tout court-circuit, nous vous

Om kortsluiting te voorkomen adviseren wij u om de

minpool van de accu los te maken en alle elektrische

verbindingen tot stand te brengen voordat u het apparaat in

disconnect the battery’s negative terminal and make all daß Sie den negativen Batterieanschluß abtrennen

recommandons de débrancher la borne négative de

la batterie et d’effectuer tous les raccordements

électriques avant d’installer l’appareil. Si l’on n’est pas de auto installeert. Als u niet zeker weet hoe u dit apparaat

sûr de pouvoir installer correctement cet appareil, le

faire installer par un technicien qualifié.

electrical connections before installing the unit. If you

are not sure how to install this unit correctly, have it

installed by a qualified technician.

und alle elektrischen Anschlüsse herstellen, bevor

das Gerät eingebaut wird. Sind Sie sich über den

richtigen Einbau des Geräts nicht sicher, lassen Sie

es von einem qualifizierten Techniker einbauen.

moet installeren, kunt u dit beter door een daartoe

gekwalificeerde technicus laten doen.

Note:

This unit is designed to operate on 12 V DC,

Hinweis:

Remarque:

Opmerking:

NEGATIVE ground electrical systems. If your vehicle Dieses Gerät ist für einen Betrieb in elektrischen

Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type

d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un revendeur

d’autoradios JVC.

Dit apparaat mag worden gebruikt bij elektrische systemen

die werken op 12 V gelijkstroom met negatieve

aarding. Als uw auto niet is uitgerust met een dergelijk

systeem, is een spanningsomzetter vereist. Dit instrument

kan worden aangeschaft bij JVC car audio dealers.

does not have this system, a voltage inverter is

required, which can be purchased at JVC IN-CAR

ENTERTAINMENT dealers.

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt. Verfügt Ihr Fahrzeug nicht über diese

Anlage, ist ein Spannungsinverter erforderlich, der

bei JVC Autoradiohändler erworben werden kann.

• Replace the fuse with one of the specified rating. If

the fuse blows frequently, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• If noise is a problem...

This unit incorporates a noise filter in the power

• Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung

häufig durch, wenden Sie sich an ihren JVC

Autoradiohändler.

• Vervang de zekering door een exemplaar met het

aangegeven vermogen. Als de zekering vaak doorslaat,

moet u uw JVC car audio dealer raadplegen.

• Als u geluidsproblemen hebt…

De krachtschakeling van dit apparaat heeft een ingebouwd

geluidsfilter. In sommige voertuigen zijn tikgeluiden of

andere ongewenste geluiden te horen. Als dit gebeurt,

moet u de massaklem aan de achterkant (zie

aansluitingsschema) aan het chassis van de auto

vastmaken met behulp van een kortere en dikkere kabel,

zoals kopermanteldraad of tellerkabel. Als het geluid niet

verdwijnt, moet u contact opnemen met uw JVC car audio

dealer.

• Remplacer le fusible par un de la valeur précisée. Si

le fusible saute souvent, consulter votre revendeur

d’autoradios JVC.

circuit. However, with some vehicles, clicking or other • Sind Störgeräusche ein Problem...

• Si le bruit est un problème...

unwanted noise may occur. If this happens, connect

the unit’s rear ground terminal (see connection

diagram) to the car’s chassis using shorter and

thicker cords, such as copper braiding or gauge wire.

If noise still persists, consult your JVC IN-CAR

ENTERTAINMENT dealer.

Dieses Gerät enthält ein Störfilter im Stromkreis. Bei

Cet appareil incorpore un filtre de bruit dans le

circuit d’alimentation. Cependant, avec certains

véhicules, quelques claquements ou autres bruits

non désirés risquent de se produire. Si cela arrive,

raccorder la borne arrière de masse de l’appareil

au châssis de la voiture (voir le diagramme de

raccordement) en utiliscant des cordons les plus

gros et les plus courts possibles telle qu’une barre

de cuivre ou une tresse. Si le bruit persiste,

consulter votre revendeur d’autoradios JVC.

• La puisscance admissible des enceintes devrait

manchen Fahrzeugen kann jedoch ein Klicken

oder andere unerwünschte Störgeräusche

auftreten. Sollte das der Fall sein, die hintere

Erdungscanschlußklemme (siehe Schaltplan) des

Geräts am Fahrwerk des Fahrzeugs anschließen,

dabei kürzere und dickere Kabel wie

• Maximum input of the speakers should be more than

50 W at the rear and 50 W at the front, with an

impedance of 4 Ω to 8 Ω.

beispielsweise Kupfergeflechtdraht oder Stahldraht

verwenden. Bleibt Störgeräusch bestehen, wenden

Sie sich an Ihren JVC Autoradiohändler.

• Het maximum ingangsvermogen van de speakers moet

achterin meer dan 50 W zijn en voorin 50 W, met een

impedantie van 4 Ω tot 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful • Die maximale Eingangsleistung der Lautsprecher

not to touch it when removing this unit.

sollte mehr als 50 W hinten und 50 W vorn bei einer

Impedanz von 4 Ω bis 8 Ω betragen.

• Sicherstellen, daß das Gerät am Fahrwerk

geerdet wird.

• Das Abstrahlblech wird nach dem Gebrauch sehr

heiß. Beim Ausbau des Geräts darauf achten, das

Abstrahlblech nicht zu berühren.

supérieure à 50 W à l’arrière et à 50 W l’avant, avec • Zorg ervoor dat dit apparaat door middel van een

une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse de

cet appareil au châssis de la voiture.

• Le dissipateur de chaleur devient très chaud après

usage. Faire attention de ne pas le toucher en

retirant cet appareil.

aardkabel is verbonden met het chassis van de

auto.

• De warmte-opnemer kan na gebruik erg heet worden.

Raak de warmte-opnemer niet aan wanneer u dit apparaat

van zijn plaats haalt.

Heat sink

Abstrahlblech

Dissipateur de chaleur

Warmte-opnemer

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen

Before connecting: Check the wiring in the vehicle

carefully. Incorrect connection may cause serious

damage to this unit.

Vor dem Anschließen: Die Verdrahtung im Fahrzeug

sorgfältig überprüfen. Falsche Anschlüsse können

ernsthafte Schäden am Gerät hervorrufen.

Avant de commencer la connexion: Vérifiez

Alvorens de verbindingen tot stand te brengen:

Moet u de bedrading in de auto zorgvuldig. Het apparaat

kan door verkeerde verbindingen ernstige schade oplopen.

attentivement le câblage du véhicule. Une connexion

incorrecte peut endommager sérieusement l’appareil.

The leads of the power cord and those of the

connector from the car body may be different in

color.

Die Leiter des Stromkabels und die Leiter des Anschlusses Le fil du cordon d’alimentation et ceux des connecteurs De draden van het stroomsnoer verschillen mogelijk van

im Fahrzeug können sich farblich unterscheiden.

du châssis de la voiture peuvent être différents en

couleur.

kleur metde aansluitingen op het chassis van de auto.

Die farbigen Leitungen des Spannunsgversorgungskabels

an der Autobatterie, ontstekingsschakelaarden

Lautsprechern und dem Motorantenne (sofern vorhanden)

in folgender Reihenfolge anschließen.

1 Sluit de gekleurde snoerdraden van de stroomkable in

de hierna genoemde volgorde aan op de accu van de

auto, de luidsprekers en de antenne (indien aanwezig).

1 Zwart: aarde

1 Connect the colored leads of the power cord to

the car battery, speakers and power aerial (if any)

in the following sequence.

1 Connectez les fils de couleur du cordon d’alimentation

à la batterie de la voiture, aux enceintes et à l’antenne

automatique (s’il y en a une) dans l’ordre suivant.

1 Noir: à la masse

1 Black: ground

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to remote lead of other

equipment or power aerial if any (200 mA max.)

5 Orange with white stripe: to car light control

switch

6 Brown: to cellular phone system (For details,

refer to the instructions of the cellular phone.)

7 Others: to speakers

1 Schwarz: Erdung

2 Geel: naar de accu van de auto (constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar afstandsdraad van

andere apparatuur of antenne met circuit indien

aanwezig (200 mA max.)

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: zur einer Zubehöranschlußklemme

4 Blau mit weißem Streifen: zum Zusatzkabel des

anderen Geräts oder der Motorantenne, sofern

vorhanden (max. 200 mA)

2 Jaune: à la batterie de la voiture (12 V constant)

3 Rouge: à une borne accessoire

4 Bleu avec bande blanche:au fil de télécommande

de l’autre appareil ou à l’antenne automatique s’il

y en a une (200 mA max.)

5 Orange avec bande blanche: à l’interrupteur

d’éclairage de la voiture

5 Oranje met witte streep: naar de schakelaar voor de

autoverlichting

5 Orange mit weißem Streifen: zum Autolichtschalter

6 Braun: an Mobiltelefon (Weitere informationen

entnehmen Sie bitte der Bedienungscanleitung

des Mobiltelefons.)

6 Bruin: naar het mobiele-telefoonsysteem (Lees voor

meer informatie de instructies die bij de mobiele

telefoon worden geleverd.)

6 Marron: à un système de téléphone cellulaire

(Pour les détails, se référer aux instructions du

téléphone cellulaire.)

7 Andere: zur Lautsprecher

7 Andere: naar de speakers

2 Connect the aerial cord.

7 Autres: aux enceintes

2 Das Antennenkabel anschließen.

2 Sluit de antenne aan.

3 Finally connect the wiring harness to the unit.

2 Connectez le cordon d’antenne.

3 Die Kabelbäume am Gerät anschließen.

3 Verbind de draadbundel daarna met het apparaat.

Note: If your vehicle does not have any accessory

terminal, move the fuse from the fuse position 1

(initial position) to fuse position 2, and connect the

red lead (A7) to the positive (+) battery terminal.

• The yellow lead (A4) is not used in this case.

3 Finalement, connectez le faisceau de fils à l’appareil.

Hinweis: Verfügt Ihr Fahrzeug nicht über eine

Zubehöranschlußklemme, die Sicherung von der 1.

Sicherungsposition (Erstposition) in die 2.

Opmerking: Als uw voertuig niet beschikt over een

aansluitklem, moet u de zekering verplaatsen van stand 1

(beginstand) naar stand 2 en moet u de rode draad (A7) met

de pluspool (+) van de accu verbinden.

Remarque: Si votre véhicule ne possède pas de borne

accessoire, déplacez le fusible de la position de fusible

1 (position originale) à la position de fusible 2 et connectez

le fil rouge (A7) à la borne positive (+) de la batterie.

• Le fil jaune (A4) n’est pas utilisé dans ce cas.

Sicherungsposition versetzen, die rote Leitung (A7) an

der (+) Batterieanschlußklemme anschließen.

• In dit geval wordt de gele draad (A4) niet gebruikt.

•

Die gelbe Leitung (A4) wird in diesem Fall nicht verwendet.

JVC CD changer/DAB tuner

or another external

We recommend you to connect the Wir empfehlen Ihnen, den MP3-

JVC MP3-compatible CD changer. kompatiblen CD-Wechsler von

Nous vous recommandons de

connecter le changeur de CD

compatible MP3 JVC. Vous pouvez tevens bepaalde andere CD-wisselaars uit

aussi connecter d’autres de CH-X serie aansluiten (uitgezonderd

changeurs de CD de la série CH-X de CH-X99 en CH-X100).

(sauf le CH-X99 et le CH-X100).

• Vous ne pouvez pas utiliser les

changeurs de CD de la série

KD-MK avec cet appareil.

Sluit bij voorkeur de JVC, MP3

compatibele CD-wisselaar aan. U kunt

component

You can also connect other CH-X

series CD changers (except

CH-X99 and CH-X100).

JVC anzuschließen. Sie können

auch andere CD-Wechsler der

Serie CH-X anschließen (außer

CD-Wechsler von JVC/DAB-

Tuner oder eine andere

externe Komponente

Changeur CD JVC/Tuner

DAB ou autre appareil

extérieur

• You cannot use the KD-MK series CH-X99 und CH-X100).

• U kunt CD-wisselaars uit de KD-MK

serie niet met dit toestel gebruiken.

Het is ook mogelijk een extern

apparaat zoals een draagbare MD-

speler aan te sluiten met behulp van de

To steering wheel remote controller

(see diagram

An Lenkradfernbedienung

(siehe Schaltplan

Pour la télécommande de volant

(voir le diagramme

Naar stuurwiel-afstandsbediening

(zie schema

CD changers with this unit.

You can also use an external

component such as a portable MD

• CD-Wechsler der Serie KD-MK

können mit diesem Gerät nicht

verwendet werden.

)

JVC CD-wisselaar/DAB-tuner

of een ander extern apparaat

)

player by connecting the Line Input Sie können auch eine externe

Adapter KS-U57 (not supplied).

(See diagram .)

Vous pouvez aussi utiliser un

appareil extérieur tel qu’un lecteur Line Input Adapter KS-U57 (niet

Komponente, z.B. einen tragbaren

MD-Spieler, verwenden, wenn Sie den de MD en connectant l’adaptateur meegeleverd). (Zie schema .)

(nicht zum Lieferumfang gehörenden) d’entrée de ligne KS-U57 (non

Line-Eingangsadapter KS-U57

)

fourni). (Voir le diagramme ).

anschließen (siehe Schaltplan ).

Fuse position 2 / 2. Sicherungsposition /

Position de fusible 2 / Zekering, stand 2

B1 B3 B5 B7

B2 B4 B6 B8

SUBWOOFER

(see diagram

(siehe Schaltplan

(voir le diagramme

)

Fuse position 1 / 1. Sicherungsposition /

Position de fusible 1 / Zekering, stand 1

A5 A7

A2 A4 A6 A8

)

B1 B3 B5 B7

B2 B4 B6 B8

)

A5 A7

(zie schema

)

Not included with this unit.

15 A fuse / 15 A Sicherung /

Fusible 15 A / Zekering 15 A

A2 A4 A6 A8

Wird nicht mit Gerät mitgeliefert.

Ignition switch

Zündschalter

Interrupteur d’allumage

Contactschakelaar

Non fourni avec cet appareil.

Niet bij het apparaat inbegrepen.

Rear ground terminal

Hintere

Erdungscanschlußklemme

Borne arrière de masse

Massaklem aan de

Black

Aerial terminal

Schwarz

Antennenanschlußklemme

Borne de l’antenne

Aansluitpunt antenne

To metallic body or chassis of the car

Noir

Zwart

Zur metallenen Karosserie oder zum Fahrwerk des Autos

Vers corps métallique ou châssis de la voiture

Naar metalen ondergrond of chassis van de auto

achterkant

Yellow*¹

Gelb*¹

Jaune*¹

Geel *¹

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch)

Zur einer stromführenden Anschlußklemme im Sicherungsblock

Line out

(see diagram

Schutz kappen

Signalausgang

(siehe Schaltplan

Sortie de ligne

(voir le diagramme

Uitgang (zie schema

To aerial

2 ^{zum Anschließen an die Autobatterie (Umgehen des}

Zündschalters)

)

Zur Antenne

A l’antenne

Naar de antenne

A une borne sous tension du porte-fusible connectée à la batterie

de la voiture (en dérivant l’interrupteur d’allumage)

Naar een onder spanning staande aansluitklem in het zekeringblok die is

aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)

)

Red

)

Rot

Rouge

Rood

To an accessory terminal in the fuse block

Zur einer Zubehöranschlußklemme im Sicherungsblock

Vers borne accessoire du porte-fusible

Fuse block

Sicherungsblock

Porte-fusible

Naar een aansluitklem in het zekeringblok

*1 : Before checking the operation of this unit prior to

Zekeringblok

Blue with white stripe

installation, this lead must be connected, otherwise

power cannot be turned on.

*1 : Vor der Überprüfung der Funktionsfähigkeit des Geräts

vor dem Einbau, muß diese Leitung angeschlossen

werden, da sonst die Stromversorgung nicht

eingeschaltet werden kann.

*1 : Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil ne

peut pas être mis sous tension.

*1 : Voordat u controleert of het apparaat werkt (alvorens het te

installeren), moet deze draad aangesloten zijn. Als dit niet het

geval is, kan de stroom niet worden ingeschakeld.

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To remote lead of other equipment or power aerial if any

Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig

Orange with white stripe

Orange mit weißem Streifen

Orange avec bande blanche

Oranje met witte streep

To car light control switch

Zum Autolichtschalter

(ILLUMINATION)

A l’interrupteur d’éclairage de la voiture

Naar de schakelaar voor de autoverlichting

To cellular phone system

Zur Moblitelephon

A un système de téléphone

cellulaire

Brown / Braun / Marron / Bruin

Naar het mobiele-telefoonsysteem

Purple

White with black stripe

Weiß mit schwarzem

Streifen

Blanc avec bande noire

Wit met zwarte streep

White

Weiß

Blanc

Wit

Gray with black stripe

Grau mit schwarzem

Streifen

Gris avec bande noire

Grijs met zwarte streep

Gray

Grau

Gris

Green with black stripe

Grün mit schwarzem

Streifen

Vert avec bande noire

Groen met zwarte streep

Green

Grün

Vert

Purple with black stripe

Lila mit schwarzem

Streifen

Violet avec bande noire

Paars met zwarte streep

Lila

Violet

Paars

Grijs

Groen

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

Rechter Lautsprecher (hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

PRECAUTIONS on power supply and

speaker connections:

• DO NOT connect the speaker leads of the power

cord to the car battery; otherwise, the unit will

be seriously damaged.

• Connect the black lead (ground), yellow lead (to car

battery, constant 12 V), and red lead (to an

accessory terminal) correctly.

• BEFORE connecting the speaker leads of the

power cord to the speakers, check the speaker

wiring in your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker wiring.

If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect

the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your

car, consult your car dealer.

VORSICHTSMASSREGELN beim

PRECAUTIONS sur l’alimentation et la

VOORZORGSMAATREGELEN bij het

verbinden van de stroomkabeldraad

Anschließen der Stromversorgung und

connexion des enceintes:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil

jaune (a la batterie de la voiture,12 V constant) et le

fil rouge (à la prise accessoire).

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage

des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2

ci-dessous, NE CONNECTEZ PAS l’appareil en

utiliscant ce câblage original des enceintes. Si

vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon

que vous puissiez connecter l’appareil aux

enceintes comme montré sur la Fig. 3.

Lautsprecher:

met de speakers:

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe Leitung

(zur Autobatterie, konstant 12 V) und die rote Leitung

(zur Zubehöranschlußklemme) richtig anschließen.

• VOR dem Anschließen der Lautsprecherleitungen

des Spannunsgversorgungskabels an die

Lautsprecher, die Lautsprecherverdrahtung in

Ihrem Auto überprüfen.

• Verbind de speakerdraden van de stroomkabel

NIET met de accu van de auto; als u dit wel doet,

zal het apparaat ernstige schade oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de accu

van de auto, constant 12 V) en de rode draad (naar de

aansluitklem van de accessoire) op de juiste wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel met

de speakers verbindt, moet u de bedrading van de

speakers in uw auto controleren.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1 en

Fig. 2, mag het apparaat NIET worden aangesloten

met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het apparaat

ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals staat

afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de oorspronkelijke

speakerbedrading in uw auto.

– Als u twijfels hebt over de speakerbedrading in uw

auto, moet u contact opnemen met uw autodealer.

– Ist die Lautsprecherverdrahtung wie unten in

„Fig. 1“ und „Fig. 2“ abgebildet, das Gerät

NICHT mit der Originalverdrahtung der

Lautsprecher anschließen, da sonst das Gerät

schwer beschädigt wird.

Die Lautsprecherverdrahtung erneuern, so daß

Sie das Gerät an den Lautsprechern wie in

„Fig. 3“ abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem Auto

wie in „Fig. 3“ abgebildet, können Sie das Gerät

mit der Originalverdrahtung der Lautsprecher in

Ihrem Auto anschließen.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

– Si vous n’êtes pas sûrs du câblage d’enceintes de

votre voiture, consulter le concessionnaire de

votre voiture.

– Sind Sie sich über die Lautsprecherverdrahtung

in Ihrem Auto nicht sicher, wenden Sie sich an

Ihren Autohändler.

Fig. 1

Fig. 2

Fig. 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

Twist the core wires when connecting.

CAUTION / VORSICHT / PRECAUTION / LET OP!:

Die Kerndrähte beim Anschließen verdrehen.

Torsader les âmes des fils en les raccordant.

Draai de kerndraden om elkaar heen

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT VERWENDETEN

Leitungen mit Isolierklebeband umwickeln.

Solder the core wires to connect them securely.

Die Kerndrähte anlöten, um sie fest anzuschließen.

Souder les âmes des fils pour les raccorder entre

eux de façon sûre.

wanneer u ze wilt aansluiten.

• Pour éviter les court-circuits, couvrir les bornes des fils

qui ne sont PAS UTILISÉS avec de la bande isolante.

• Om kortsluiting te voorkomen, moet u de

Soldeer de kerndraden zodat ze stevig vast zitten.

aansluitklemmen van ONGEBRUIKTE

gekleurde draden met isolatieband bedekken.

Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

You can connect an amplifier and other equipment to Sie können einen Verstärker oder ein anderes Gerät

upgrade your car stereo system. anschließen, um Ihre Autostereoanlage zu erweitern.

Vous pouvez connecter un amplificateur ou autre

appareil pour améliorer votre système autoradio.

• Connectez le fil de commande à distance (bleu

avec bande blanche) au fil de commande à

distance de l’autre appareil de façon qu’il puisse

être commandé via cet appareil.

Het is mogelijk om uw autostereosysteem uit te breiden

met een versterker of andere apparatuur.

• Verbind de externe kabel (blauw met witte streep) met

de externe kabel van het andere apparatuur zodat deze

op afstand vanaf deze apparaat kan worden bediend.

• Alleen voor een versterker:

• Connect the remote lead (blue with white stripe) to • Schließen Sie das Fernbedienungskabel (blau mit

the remote lead of the other equipment so that it

can be controlled through this unit.

weißem Streifen) an das Fernbedienungskabel des

anderen Geräts an, so daß es über dieses Gerät

gesteuert werden kann.

• For amplifier only:

– Connect this unit’s line-out terminals to the

amplifier’s line-in terminals.

• Nur für den Verstärker:

• Pour l’amplificateur seulement:

– Verbind de uitgang van het apparaat met de ingang

van de versterker.

– Die Anschlußklemmen am Ausgang dieses Gerät

an den Anschlußklemmen des Eingangs des

Verstärkers anschließen.

– Die Lautsprecher von diesem Gerät abtrennen

und am Verstärker anschließen. Die

Lautsprecherleitungen dieses Geräts unbenutzt

lassen. (Die Anschlußklemmen dieser nicht

verwendeten Leitungen mit Isolierklebeband

umwickeln, siehe Abbidung oben.)

– Der Ausgangspegel dieses Geräts wird auf

einem hohen Wert gehalten, um den Hifi-Klang

zu unterstützen, den dieses Gerät reproduziert.

Wenn Sie einen externen Verstärker an dieses

Gerät anschließen, stellen Sie den

– Raccorder les bornes de sortie ligne de cet appareil

aux bornes d’entrée ligne de l’amplificateur.

– Déconnectez les enceintes de cet appareil et

connectez-les à l’amplificateur. Laissez les fils

d’enceintes de cet appareil inutilisés.

(Recouvrir les extrémités de ces fils inutilisés

avec de la bande isolante comme montré ci-

dessus.)

– Le niveau de sortie de ligne de cet appareil est

maintenu à un niveau élevé pour maintenir une

qualité Hi-Fi pour les sons reproduits par cet

appareil.

– Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused. (Cover the

terminals of these unused leads with

insulating tape, as illustrated above.)

– The line output level of this unit is kept high to

maintain the hi-fi sounds reproduced from this unit.

When connecting an external amplifier to

this unit, turn down the gain control on the

external amplifier to obtain the best performance

from this unit.

– Koppel de speakers van dit apparaat los en

verbind ze aan de versterker. Gebruik de

speakerdraden van dit apparaat niet. (Plak

de aansluitklemmen van deze

speakerdraden met isolatieband af zoals

hierboven is afgebeeld.)

– Het uitgangsniveau van het geluid is hoog om het

hifi-geluid van deze eenheid te behouden.

Wanneer u een extern apparaat op deze

eenheid aansluit, moet u erop letten dat u de

versterkingsfactor van de externe versterker laag

houdt, zodat deze eenheid de beste prestaties levert.

Lors de la connexion d’un amplificateur

extérieur à cet appareil, diminuez le réglage du

gain sur l’amplificateur extérieur pour obtenir les

meilleures performances de cet appareil.

Verstärkungsregler des externen Verstärkers

herunter, um die bestmögliche Leistung dieses

Geräts zu erzielen.

Amplifier / Verstärker / Amplificateur / Versterker

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

*2 : Firmly attach the ground wire to the metallic

body or to the chasis of the car—to the place

not coated with paint (if coated with paint,

remove the paint before attaching the wire).

Failure to do so may cause damage to the unit.

*2 : Verbinden Sie den Erdungsleiter mit der

Karosserie oder dem Rahmen des

Remote lead

Y-connector (not supplied with this unit)

Fernbedienungsleitung

Fil d’alimentation à distance

Afstandbedieningsdraad

Y-Anschluß (nicht mit diesem Gerät mitgeliefert)

Connecteur Y (non fourni avec cet appareil)

Y-connector (wordt niet bij dit apparaat geleverd)

INPUT

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

To power aerial if any

Zur Motorantenne, sofern

vorhanden

Vers l’antenne automatique, s’il y

en a une

Naar de antenne (indien aanwezig)

Fahrzeugs. Die Kntaktstelle darf nicht lackiert

sein (sollte die Kontaktstelle lackiert sein,

entfernen Sie den Lack der Kontaktstelle,

bevor Sie den Leiter befestigen). Wenn der

Erdungsleiter nicht ordnungsgemäß

angeschlossen wird, kann dieses Gerät

beschädigt werden.

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

*2 : Attachez solidement le fil de mise à la masse

au châssis métallique de la voiture—à un

endroit qui n’est pas recouvert de peinture

(s’il est recouvert de peinture, enlevez

d’abord la peinture avant d’attacher le fil).

L’appareil peut être endommagé si cela n’est

pas fait correctement.

*2 : Bevestig de aardedraad goed met een metalen

onderdeel of het chassis van de auto—bevestig op

een niet-gelakt gedeelte (indien gelakt, schuur dan

af alvorens de draad te bevestigen). Het toestel

kan worden beschadigd indien de aardedraad niet

goed is aangesloten.

OUT

LINE

INPUT

Front speakers

JVC Amplifier

Vordere Lautsprecher

Enceintes avant

Voorspeakers

JVC Verstärker

JVC Amplificateur

JVC Versterker

REAR FRONT

Front speakers

Vordere Lautsprecher

Enceintes avant

KD-SX998R/

KD-SX997R

You can connect another power amplifier for front speakers.

Sie können einen anderen Leistungsverstärker für die vorderen Lautsprecher

anschließen.

Voorspeakers

Vous pouvez connecter un autre amplificateur de puissance pour les enceintes avant.

U kunt nog een eindversterker voor de voorspeakers aansluiten.

CD changer and DAB tuner / CD-Wechsler und DAB-Tuner / Changeur CD et tuner DAB / CD-wisselaar en DAB-tuner

You can connect a JVC CD changer and/or a JVC

DAB (Digital Audio Broadcasting) tuner.

• For their connections, refer to the instructions

supplied with them.

Sie können einen CD-Wechsler und/oder einen

DAB-Tuner (Tuner für digitalen Rundfunk) von JVC

anschließen.

• Weitere Informationen über den Anschluß können

Sie der Bedienungscanleitung entnehmen, die dem

jeweiligen Gerät beiliegt.

Vous pouvez connecter un changeur CD JVC et/ou

un tuner DAB (Digital Audio Broadcasting) JVC.

• Pour leurs connexions, référez-vous aux modes

d’emploi qui les accompagnent.

Het is mogelijk een JVC CD-wisselaar en/of JVC

DAB-tuner (Digital Audio Broadcasting) aan te sluiten.

• Zie de instructies van deze apparaten voor meer

informatie over het tot stand brengen van deze

aansluiting.

Connecting cord supplied with your DAB tuner or CD changer

Verbindungskabel, das zum Lieferumfang des DAB-Tuners oder CD-Wechslers gehört

Cordon de connexion fourni avec votre tuner DAB ou changeur CD

Connecting cord supplied with your CD changer

Verbindungskabel, das zum Lieferumfang des

CD-Wechsler gehört

Cordon de connexion fourni avec votre changeur CD

Verbindingskabel die met de CD-wisselaar wordt

meegeleverd

Connecting cord supplied with your DAB tuner

Verbindungskabel, das zum Lieferumfang des DAB-

Tuners gehört

Cordon de connexion fourni avec votre tuner DAB

Verbindingskabel die met de DAB-tuner wordt

meegeleverd

Verbindingskabel die met de DAB-tuner of CD-wisselaar wordt meegeleverd

JVC CD changer

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

JVC DAB tuner

DAB-Tuner von JVC

Tuner DAB JVC

JVC DAB-tuner

oder

JVC DAB tuner

DAB-Tuner von JVC

Tuner DAB JVC

JVC CD changer

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

KD-SX998R/

KD-SX997R

JVC DAB-tuner

KD-SX998R/

KD-SX997R

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• Before connecting the CD changer and/or the DAB tuner, make sure that the unit is turned off.

• Bevor Sie den CD-Wechsler und/oder den DAB-Tuner anschließen, vergewissern Sie sich, daß das

Gerät ausgeschaltet ist.

• Avant de connecter le changeur CD et/ou le tuner DAB, s’assurer que l’unité est éteinte.

• Zorg ervoor dat de apparaat is uitgeschakeld alvorens u de en/of DAB-tuner CD-wisselaar aansluit.

• You can connect both components in series as illustrated above.

• Es ist möglich, beide Komponenten in einer Serienschaltung entsprechend der obigen Darstellung

anzuschließen.

• Vous pouvez connecter les deux appareils en série comme montré ci-dessus.

• Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten.

External Component / Externe Komponente / Appareil extérieur / Extern apparaat

Subwoofer / Subwoofer / Caisson de grave / Subwoofer

Signal cord (not supplied with this unit)

Line Input Adapter KS-U57 (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Line-Eingangsadapter KS-U57 (nicht mit diesem Gerät mitgeliefert)

Adaptateur d’entrée de ligne KS-U57 (non fourni avec cet appareil)

Subwoofer

Signaalkabel (wordt niet bij dit apparaat geleverd)

Line Input Adapter KS-U57 (wordt niet bij dit apparaat geleverd)

Subwoofer

Caisson de

grave

External component

Externe Komponente

Appareil extérieur

Extern apparaat

KD-SX998R/

KD-SX997R

Subwoofer

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

Signal cord (not supplied with this unit)

KD-SX998R/

KD-SX997R

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

CD changer jack

Buchse für CD-Wechsler

Prise du changeur CD

Aansluiting voor CD-wisselaar

SUBWOOFER

Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /

Verbinden met de stuurwiel-afstandsbediening

OE remote adapter (not supplied)

Radio-Lenkrad-Fernbedienungsadaption (nicht im

Lieferumfang enthalten)

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller.

To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR

ENTERTAINMENT dealer for details.

Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver steuern. Hierfür

ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht im Lieferumfang enthalten)

erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC Autoradiohändler.

Steering wheel remote input

Adaptateur pour télécommande au volant (non fourni)

Adapter voor stuurwiel-afstandsbediening (niet bijgeleverd)

Eingang für Lenkradfernbedienung

Entrée de la télécommande de volant

Ingang stuurwiel-afstandsbediening

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la

télécommande. Pour le faire, un adaptateur pour télécommande au volant (non fourni) correspondant à votre voiture est

nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Indien uw auto een stuurwiel-afstandsbediening (niet bijgeleverd) heeft, kunt u deze receiver met die afstandsbediening bedienen.

Hiervoor heeft u echter een JVC adapter nodig die geschikt is voor de stuurwiel-afstandsbediening in uw auto. Raadpleeg uw JVC

car audio dealer voor details.

Steering wheel remote controller (equipped in the car)

Lenkradfernbedienung (im Fahrzeug installiert)

Télécommande de volant (installée dans la voiture)

Stuurwiel-afstandsbediening (in de auto)

KD-SX998R/

KD-SX997R

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Washer iwc 91082 User Manual
Invacare Wheelchair Solara 3G User Manual
Ironman Fitness Home Gym 530e User Manual
James Loudspeakers Speaker EMB User Manual
Jensen Car Speaker XS4420Sm User Manual
JVC Headphones HAFR50P User Manual
K2 Mounts TV Mount K1 F S User Manual
Kenmore Vacuum Cleaner 1163172 User Manual
Kensington Scanner K62064A User Manual
Kicker Car Speaker RMB6 User Manual