JVC Car Stereo System GET0122 001A User Manual

CASSETTE RECEIVER

РЕСИВЕР С КАССЕТНЫМ ПРОИГРЫВАТЕЛЕМ

KS-FX945R

ATT

SOUND

SOURCE

VOL

В соответствии с Законом Российской Федерации “О защите прав

потребителей” срок службы (годности) данного товара “по истечении

которого он может представлять опасность для жизни, здоровья

потребителя, причинять вред его имуществу или окружающей среде”

составляет семь (7) лет со дня производства. Этот срок является

временем, в течение которого потребитель данного товара может

безопасно им пользоваться при условии соблюдения инструкции по

эксплуатации данного товара, проводя необходимое обслуживание,

включающее замену расходных материалов и/или соответствующее

ремонтное обеспечение в специализированном сервисном центре.

For installation and

connections, refer to the

separate manual.

Указания по установке

и выполнению

соединений

приводятся в

отдельной

инструкции.

Дополнительные косметические материалы к данному товару,

поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня

его производства.

Срок службы (годности), кроме срока хранения дополнительных

косметических материалов, упомянутых в предыдущих двух пунктах, не

затрагивает никаких других прав потребителя, в частности, гарантийного

свидетельства JVC, которое он может получить в соответствии с законом

о правах потребителя или других законов, связанных с ним.

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

GET0122-001A

[EE]

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

How to use the MODE button ...................

OTHER MAIN FUNCTIONS ................ 25

Changing the general settings (PSM) ....... 25

Detaching the control panel ...................... 29

LOCATION OF THE BUTTONS ............

Control panel.............................................

Remote controller......................................

Preparing the remote controller ................

CD CHANGER OPERATIONS .............. 30

About MP3 discs ....................................... 30

Playing discs ............................................. 30

Selecting the playback modes .................. 34

BASIC OPERATIONS .......................

Turning on the power ................................

Setting the clock........................................

EXTERNAL COMPONENT OPERATIONS ... 35

Playing an external component................. 35

RADIO OPERATIONS ......................

DAB TUNER OPERATIONS ................ 36

Tuning in to an ensemble and one of the

Listening to the radio.................................

Storing stations in memory ....................... 10

Tuning in to a preset station ...................... 11

services .................................................. 36

Storing DAB services in memory .............. 37

Tuning in to a preset DAB service ............. 38

What you can do more with DAB .............. 39

RDS OPERATIONS ......................... 12

What you can do with RDS ....................... 12

Other convenient RDS functions and

TROUBLESHOOTING ...................... 40

MAINTENANCE ............................. 42

SPECIFICATIONS ........................... 43

adjustments ............................................ 16

TAPE OPERATIONS ........................ 19

Listening to a cassette .............................. 19

Finding the beginning of a tune................. 20

Other convenient tape functions ............... 21

Prohibiting cassette ejection ..................... 22

SOUND ADJUSTMENTS ................... 23

Selecting preset sound modes

(C-EQ: custom equalizer) ....................... 23

Adjusting the sound .................................. 24

BEFORE USE

*For safety....

*Temperature inside the car....

If you have parked the car for a long time in hot or

cold weather, wait until the temperature in the car

becomes normal before operating the unit.

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION OF THE BUTTONS

Control panel

Display window

s d

1 2

3 4

9 p q

;

(standby/on/attenuator) button

Display window

2 5 (up) button

s Disc information indicators

23 (tape direction) button

TAG (ID3 Tag), (folder),

(track/file)

3 4

/¢

buttons

• Lights up only when playing an MP3 disc or a

CD Text on a JVC MP3-compatible CD changer.

d Tape-in indicator

4 Remote sensor

5 Display window

6 0 (eject) button

f Main display

g Playback item indicators

(disc)

• Lights up only when connecting to a CD changer.

(folder)

• Lights up only when playing an MP3 disc on a

JVC MP3-compatible CD changer.

h Source/clock display

j RND (random) indicator

• Lights up only when connecting to a CD changer.

k EQ (equalizer) indicator

l Sound mode (C-EQ: custom equalizer)

indicators

7 FM AM (DAB) button

8 TAPE CD-CH (CD changer) button

(control panel release) button

p ∞ (down) button

q SEL (select) button

w Control dial

e EQ (equalizer) button

r MO (monaural) button

y Number buttons

u RPT (repeat) button

i RND (random) button

• Functions only when connecting to a CD changer.

o MODE button

• Also functions as SSM buttons when pressed

together with DISP (display) button.

; DISP (display) button

(Dolby B) button

ROCK, CLASSIC, POPS, HIP HOP, JAZZ,

USER

(Dolby B) indicator

z Tuner reception indicators

MO (monaural), ST (stereo)

x LOUD (loudness) indicator

c RDS indicator

AF, REG, TP, PTY

v MP3 indicator

• Also functions as SSM buttons when pressed

together with MODE button.

a TP PTY (traffic programme/programme type)

button

• Lights up only when playing an MP3 disc on a

JVC MP3-compatible CD changer.

b Volume (or audio) level indicator

Equalizer pattern indicator

n RPT (repeat) indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

3 • Selects the preset stations while listening to

the radio (or the DAB tuner).

Remote controller

Each time you press the button, the preset

station (or service) number increases, and

the selected station (or service) is tuned in.

• While playing an MP3 disc on an MP3-

compatible CD changer;

ATT

SOUND

– Skips to the previous disc if pressed

briefly.

– Skips to the previous folder if pressed and

held.

Note: While playing a CD on a CD changer, this

always skips to the previous disc.

SOURCE

4 Functions the same as the control dial on the

main unit.

Note: These buttons do not function for the

preferred setting mode adjustment.

VOL

5 Selects the sound mode (C-EQ: custom

equalizer).

Each time you press the button, the sound

mode (C-EQ) changes.

1 • Turns on the unit if pressed when the unit is

turned off.

6 Selects the source.

Each time you press the button, the source

changes.

• Turns off the unit if pressed and held until

“SEE YOU” appears on the display.

• Drops the volume level in a moment if

pressed briefly.

7 • Searches for stations while listening to the

radio.

Press again to resume the volume.

• Selects services while listening to the DAB

tuner if pressed briefly.

2 • Selects the band while listening to the radio

(or the DAB tuner).

• Searches for ensembles while listening to

the DAB tuner if pressed for more than one

second.

• Functions as the fast-forward or rewind

buttons if pressed and held while listening to

a cassette.

Each time you press the button, the band

changes.

• Changes the tape direction while listening to

a cassette.

Each time you press the button, the tape

direction changes alternately.

• While playing an MP3 disc on an MP3-

compatible CD changer;

– Skips to the next disc if pressed briefly.

– Skips to the next folder if pressed and

held.

To release this operation, press button 2 to

resume playback.

• Functions as Multi Music Scan buttons if

pressed while listening to a cassette.

To release this operation, press button 2 to

resume playback.

• Fast-forwards or reverses the track/file if

pressed and held while listening to the CD

changer.

Note: While playing a CD on a CD changer, this

always skips to the next disc.

• Skips to the beginning of the next track/file

or goes back to the beginning of the current

(or previous) tracks/files if pressed briefly

while listening to the CD changer.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Return the battery holder.

Preparing the remote

controller

Insert again the battery holder by pushing it

until you hear a clicking sound.

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

(back side)

Remote sensor

WARNING:

• Store the battery in a place where children

cannot reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

• Do not recharge, short, disassemble, or heat the

battery or dispose of it in a fire.

Doing any of these things may cause the battery

to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic

materials.

Doing this may cause the battery to give off

heat, crack, or start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may start to give off heat, crack, or start

a fire.

Installing the battery

When the controllable range or effectiveness of

the remote controller decreases, replace the

battery.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

2) Remove the battery holder.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off

heat, crack, or start a fire.

(back side)

CAUTION:

DO NOT leave the remote controller in a place

(such as dashboards) exposed to direct sunlight

for a long time. Otherwise, it may be damaged.

2. Place the battery.

Slide the battery into the holder with the +

side facing upwards so that the battery is

fixed in the holder.

Lithium coin

battery (product

number: CR2025)

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

Turning on the power

3 Adjust the volume.

To increase the volume

1 Turn on the power.

To decrease the volume

Volume level appears.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

2 Select the source.

Volume (or audio) level indicator

(see page 27)

4 Adjust the sound as you want. (See

pages 23 and 24.)

To operate the tuner (FM or AM),

see pages 9 – 18.

To play a tape,

To drop the volume in a moment

see pages 19 – 22.

To operate the CD changer,

see pages 30 – 34.

To operate the external component

(LINE IN), see page 35.

To operate the DAB tuner,

see pages 36 – 39.

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial, you can also restore

the sound.

To turn off the power

Press and hold

second.

for more than one

“SEE YOU” appears, then the unit turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the clock

4 Set the clock system.

1 Select “24H/12H.”

2 Select “24H” or “12H.”

You can also set the clock system to either

24 hours or 12 hours.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 26.)

5 Finish the setting.

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

2 Adjust the hour.

Note:

To show the clock time on the display, see page 27.

To check other information during play, press

DISP (display).

3 Set the minute.

1 Select “CLOCK M” (minute).

2 Adjust the minute.

Each time you press the button, the other

information will be shown on the upper part of

the display. (See page 27 for details.)

• Pressing DISP (display) with the unit turned off

will show the clock time for about 5 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO OPERATIONS

To stop searching before a station is received,

press the same button you have pressed for

searching.

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station manually:

Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

Searching a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

Note:

Selected band appears*.

This receiver has three FM bands (FM1, FM2,

FM3).

• FM1/FM2: 87.5 MHz to 108.0 MHz

• FM3:

65.00 MHz to 74.00 MHz

2 Press and hold ¢

or 4

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

until “MANU” (manual) starts

flashing on the display.

* When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

Note:

This receiver has three FM bands (FM1, FM2,

FM3).

• FM1/FM2: 87.5 MHz to 108.0 MHz

• FM3:

65.00 MHz to 74.00 MHz

2 Start searching a station.

To search stations of

higher frequencies

To search stations of

lower frequencies

When a station is received, searching stops.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

Storing stations in memory

3 Tune in to a station you want while

“MANU” (manual) is flashing.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

To search stations of

higher frequencies

• Manual preset of both FM and AM stations

To search stations of

lower frequencies

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

• If you release your finger from the button,

the manual mode automatically turns off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing—in 50 kHz intervals

(87.5 MHz – 108.0 MHz for FM 1 and

FM 2), in 30 kHz intervals (65.00 MHz –

74.00 MHz for FM 3) and 9 kHz for AM

—MW/LW until you release the button.

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

Each time you press the

button, the band changes as

follows:

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

When an FM stereo broadcast is hard to

receive:

2 Press and hold both buttons for

1 Press MODE to enter the

functions mode while listening

to an FM stereo broadcast.

“MODE” flashes on the upper

part of the display.

more than 2 seconds.

2 Press MO (monaural), while

“MODE” is still flashing on the

display, so that the MO

indicator lights up on the

display.

Each time you press the

button, the MO indicator lights

up and goes off alternately.

“- -SSM- -” appears, then disappears

when automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

MO (monaural) indicator

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Each time you press the

button, the band changes as

follows:

Tuning in to a preset station

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 10 and 11.

2 Tune in to a station (in this example,

of 92.5 MHz).

To search stations of

higher frequencies

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

To search stations of

lower frequencies

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

2 Select the number (1 – 6) for the

preset station you want.

3 Press and hold the number button

(in this example, 1) for more than

2 seconds.

Selected band/preset number

and “MEMO” (memory) appear

alternately for a while.

Download from Www.Somanuals.com. All Manuals Search And Download.

RDS OPERATIONS

What you can do with RDS

To use Network-Tracking Reception

You can select the different modes of network-

tracking reception to continue listening to the

same programme in its finest reception.

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Another advantage of RDS function is called

“Enhanced Other Networks.” By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favorite

programme or traffic announcement while

listening to another programme or to another

source such as tape.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

activated with Regionalization set to

“off.”

With this setting, the unit switches to

another station within the same

network when the receiving signals

from the current station become

weak. (In this mode, the programme

may differ from the one currently

received.)

The AF indicator lights up but the

REG indicator does not.

By receiving the RDS data, this unit can do the

following:

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

• AF REG: Network-Tracking Reception is

activated with Regionalization set to

“on.”

With this setting, the unit switches to

another station, within the same

network, broadcasting the same

programme when the receiving

signals from the current station

become weak.

• And some other functions

Tracing the same programme

automatically (Network-Tracking

Reception)

Both the AF indicator and the REG

indicator light up.

• OFF:

Network-Tracking Reception is

deactivated.

Neither the AF indicator nor the REG

indicator lights up.

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting the

same programme with stronger signals. So, you

can continue to listen to the same programme in

its finest reception, no matter where you drive.

(See the illustration on page 18.)

AF indicator

REG indicator

Two types of the RDS data are used to make

Network-Tracking Reception work correctly

—PI (Programme Identification) and AF

(Alternative Frequency).

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

Note:

If a DAB tuner is connected and Alternative Reception

(for DAB services) is activated, Network-Tracking

Reception (“AF”) is also activated automatically. On

the other hand, Network-Tracking Reception cannot

be deactivated without deactivating Alternative

Reception. (See page 39.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Using TA Standby Reception

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 26.)

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

the current source (another FM station, tape, or

other connected components).

• TA Standby Reception will not work if you are

listening to an AM station.

Press TP PTY to activate TA Standby Reception.

2 Select “AF-REG” (alternative

frequency/regionalization reception)

if not shown on the display.

7 When the current source is FM, the TP

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically tunes in to

the station. The volume changes to the

preset TA volume level (see page 17) and the

traffic announcement can be heard.

3 Select the desired mode—“AF,”

“AF REG,” or “OFF.”

• If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

4 Finish the setting.

signals. Press ¢

or 4

to search

for such a station.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

To deactivate the TA Standby Reception,

press TP PTY again. The TP indicator goes off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using PTY Standby Reception

4 Finish the setting.

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from the current source

(another FM station, tape, or other connected

components).

• PTY Standby Reception will not work if you are

listening to an AM station.

7 When the current source is FM, the PTY

indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

If a station starts broadcasting the selected

PTY programme, this unit automatically

tunes in to the station.

You can select your favorite programme type for

PTY Standby Reception.

When shipped from the factory, PTY Standby

Reception is turned off. (“OFF” is selected for

PTY Standby Reception.)

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated since the

station being received does not provide the

signals used for PTY Standby Reception.

To activate PTY Standby Reception, you

need to tune in to another station providing

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 26.)

these signals. Press ¢

or 4

search for such a station.

When a station providing these signals is

tuned in, the PTY indicator stops flashing

and remains lit. Now PTY Standby Reception

is activated.

2 Select “PTY STBY” (standby) if not

shown on the display.

7 When the current source is other than FM,

the PTY indicator lights up.

If a station starts broadcasting the selected

PTY programme, this unit automatically

changes the source and tunes in to the station.

To deactivate the PTY Standby Reception,

select “OFF” in step 3 on the left column. The

PTY indicator goes off.

3 Select one of the twenty-nine PTY

codes. (See page 18.)

Selected code name

appears on the display

and is stored into

memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

Searching your favorite programme

2 Select one of the twenty-nine PTY

codes. (See page 18.)

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

programme types in the number buttons.

When shipped from the factory, the following

6 programme types have been stored in the

number buttons (1 to 6).

Selected code name

appears on the display.

To store your favorite programme types, see

below.

3 Press and hold the number button

for more than 2 seconds to store the

PTY code selected into the preset

number you want.

To search your favorite programme type, see

page 16.

POP M

ROCK M

EASY M

CLASSICS

AFFAIRS

VARIED

Selected preset number and “MEMO”

(memory) appear alternately.

To store your favorite programme types

1 Press and hold TP PTY for more

than 2 seconds while listening to an

FM station.

4 Press and hold TP PTY for more

than 2 seconds to exit from this

mode.

The last selected PTY code appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

• If there is no station broadcasting a

programme of the same PTY code as you

selected, the station will not change.

To search your favorite programme type

1 Press and hold TP PTY for more

than 2 seconds while listening to an

FM station.

Note:

In some areas, the PTY search will not work correctly.

Other convenient RDS

The last selected PTY code appears.

functions and adjustments

2 To select one of your favorite

programme type

Automatic selection of the station

when using the number buttons

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

To select any one of the twenty-nine

PTY codes

• The unit takes some time to tune in to another

station using programme search.

Preset number appears only if you select

a PTY code using the number buttons.

To activate programme search, follow the

procedure below.

• See also “Changing the general settings

(PSM)” on page 25.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

Ex.: When “ROCK M” is selected

2 Press ¢

or 4

to select

3 Press ¢

or 4

to start PTY

“P(Programme)-SEARCH.”

search for your favorite programme.

3 Turn the control dial clockwise to select “ON.”

Now programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the display mode while

listening to an FM station

You can change the initial indication on the

display to station name (PS NAME) or station

frequency (FREQ) while listening to an FM RDS

station.

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the

preset level.

• See also “Changing the general settings

(PSM)” on page 25.

• See also “Changing the general settings

(PSM)” on page 25.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

(TA volume).

or 4

to select “TA VOL”

2 Press ¢

(tuner display).

or 4

to select “TU DISP”

3 Turn the control dial to set to the desired

volume.

You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

3 Turn the control dial to set to the desired

indication (“PS NAME” or “FREQ”).

4 Press SEL (select) to finish the setting.

Note:

Automatic clock adjustment

By pressing DISP (display), you can change the

display while listening to an FM RDS station. Each

time you press the button, the following information

appears on the main display:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS

signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings

(PSM)” on page 25.

Station name

(PS NAME)

Station frequency

(FREQ)

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

Programme type

(PTY)

2 Press ¢

or 4

to select “AUTO

ADJ” (adjustment).

3 Turn the control dial counterclockwise to select

“OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

• Then, the display goes back to the original

indication in several seconds.

• For more details, see “To set the clock display

—CLOCK” on page 27.

To reactivate clock adjustment, repeat the

same procedure and select “ON” in step 3 by

turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

Download from Www.Somanuals.com. All Manuals Search And Download.

PTY codes

NEWS:

AFFAIRS:

News

SOCIAL:

Programmes on social

activities

Topical programmes expanding

on current news or affairs

Programmes which impart

advice on a wide variety of topics

Sport events

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

INFO:

nature of existence or ethics

SPORT:

PHONE IN: Programmes where people can

express their views either by

EDUCATE: Educational programmes

DRAMA: Radio plays

phone or in a public forum

CULTURE: Programmes on national or

regional culture

TRAVEL:

LEISURE:

JAZZ:

Programmes about travel

destinations, package tours,

and travel ideas and

opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing,

etc.

SCIENCE:

Programmes on natural science

and technology

VARIED:

Other programmes like comedies

or ceremonies

POP M:

Pop music

ROCK M:

EASY M:

LIGHT M:

Rock music

Easy-listening music

Light music

Jazz music

COUNTRY: Country music

NATION M: Current popular music from

another nation or region, in that

country’s language

OLDIES:

FOLK M:

CLASSICS: Classical music

OTHER M: Other music

WEATHER: Weather information

FINANCE: Reports on commerce, trading,

the Stock Market, etc.

Classic pop music

Folk music

CHILDREN: Entertainment programmes for

children

DOCUMENT: Programmes dealing with

factual matters, presented in an

investigative style

The same programme can be received on different frequencies.

Programme 1

broadcasting on

frequency A

Programme 1

broadcasting on

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

frequency C

Programme 1

broadcasting on

frequency D

Download from Www.Somanuals.com. All Manuals Search And Download.

TAPE OPERATIONS

To stop play and eject the cassette

Press 0.

Tape play stops, the control panel flips down. The

cassette automatically ejects from the cassette

compartment. The source changes to the

previously selected one.

Listening to a cassette

You can play back type I (normal) tapes.

1 Open the control panel.

If you change the source, tape play also stops

(without ejecting the cassette this time).

• You can also eject the cassette by pressing 0

while the unit is turned off.

Note on One-Touch Operation:

When a cassette is already in the cassette

compartment, pressing TAPE CD-CH turns on

the unit and starts tape play automatically.

To fast-forward and rewind a tape

Press and hold ¢

more than one second to

fast-forward the tape.

When the tape reaches its

end, the tape is reversed

and playback starts from the

beginning of the other side.

for

2 Insert a cassette into the cassette

compartment.

The unit turns on and

tape play starts

automatically.

Press and hold 4

for more than one

second to rewind the tape.

When the tape reaches its end, playback of the

same side starts.

3 Close the control panel by hand.

To stop fast-forward and rewind at any

position on the tape, press 23.

Tape play starts from that position on the tape.

Notes:

4 Select the tape direction.

Each time you press 23,

• When one side of the tape reaches its end during

play, the other side of the tape automatically starts

playing. (Auto Reverse)

• When the tape reaches its end while fast-

forwarding, the tape direction will be changed

automatically.

the tape direction changes

alternately between forward

(

) and reverse

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back tapes recorded with the

Dolby B NR*

1 Press MODE to enter the functions mode

while listening to a tape.

“MODE” flashes on the upper part of the

display.

Ex.: When you locate three tunes ahead

of the current tune

2 Press

(Dolby B), while “MODE” is still

Each time you press the buttons, the number

changes up to 9.

When the beginning of the specified tune is

located, playback starts automatically.

flashing on the display so that the

(Dolby B) indicator lights up.

“DOLBY B” also appears on the display for

several seconds.

Notes:

To cancel the Dolby B NR, repeat steps 1

• While locating a specified tune:

– If the tape is rewound to its beginning, playback

starts from the beginning of that side.

– If the tape is fast-forwarded to the end, it is

reversed and played from the beginning of the

other side.

• In the following cases, the Multi Music Scan

function may not operate correctly:

– Tapes with tunes having long pianissimo

passages (very quiet parts) or non-recorded

portions between tunes.

and 2 again so that the

goes off.

(Dolby B) indicator

* Manufactured under license from Dolby

Laboratories.

“Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

– Tapes with short non-recorded sections.

– Tapes with high level of noise or humming

between tunes.

– Tapes with tunes recorded at low recording

levels.

Finding the beginning of a

tune

Multi Music Scan (MMS) allows you to

– The Dolby NR setting does not match. For

example, if Dolby B NR is on and the tape was

recorded with no Dolby NR.

automatically start playback from the beginning

of a specified tune.You can specify up to 9 tunes

ahead of or before the current tune.

During playback

Specify the tune you want to locate (how

many tunes ahead of or before the

current tune).

Press ¢

to locate a

tune ahead of the current

tune on the cassette.

Press 4

to locate a

tune before the current

tune on the cassette.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other convenient tape functions

3 Turn the control dial clockwise to

select “ON.”

Now Blank Skip is

activated.

Skipping the blank portions on the tape

You can skip blank portions between the tunes

(Blank Skip).

When this function is turned on, the unit fast-

forwards (skipping blank portions of 15 seconds

or more), to the next tune and starts playback.

• See also “Changing the general settings

(PSM)” on page 25.

4 Finish the setting.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 26.)

To cancel Blank Skip, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

2 Press ¢

or 4

“B.SKIP” (blank skip).

to select

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing the current tune repeatedly

You can play the current tune repeatedly

(Repeat Play).

Prohibiting cassette ejection

You can prohibit cassette ejection and lock a

cassette in the cassette compartment.

1 Press MODE to enter the

functions mode while playing a

tune you want to hear over again

on a cassette.

While pressing TAPE CD-CH, press and

hold

for more than 2 seconds.

“MODE” flashes on the upper

part of the display.

2 Press RPT (repeat), while

“MODE” is still on the display, so

that “REPEAT” appears on the

display.

“NO EJECT” flashes on the display for about

5 seconds, and the cassette is locked and

cannot be ejected.

Lights up when Repeat Play is turned on.

To cancel the prohibition and unlock the

cassette

While pressing TAPE CD-CH, press and hold

again for more than 2 seconds.

When the tune has been played, the tape is

automatically rewound to the beginning of that

tune and the same tune will be played again.

“EJECT OK” flashes on the display for about

5 seconds, and the cassette is unlocked.

To cancel Repeat Play, repeat steps 1 and 2

again so that the RPT indicator goes off.

Note:

In the following cases, Blank Skip and Repeat Play

may not operate correctly:

– Tapes with tunes having long pianissimo passages

(very quiet parts) or non-recorded portions during

tunes.

– Tapes with short non-recorded sections.

– Tapes with high level noise or humming between

tunes.

Note:

If you press 0 while cassette ejection is prohibited,

the control panel flips down, but the cassette

continues to play and cannot be ejected.

– Tapes with tunes recorded at low recording levels.

– The Dolby NR setting does not match. For example,

if Dolby B NR is on and the tape was recorded with

no Dolby NR.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

Selecting preset sound modes

Indication

For:

Preset values

BAS TRE LOUD

(C-EQ: custom equalizer)

USER

ROCK

(Flat sound)

OFF

You can select a preset sound mode (C-EQ:

custom equalizer) suitable to the music genre.

Rock or

disco music

+03

+01

CLASSIC Classical

music

+01

–02

OFF

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

POPS

Light music

+04

+02

+01

OFF

HIP HOP Funk or rap

music

1 Press MODE to enter the functions

mode.

JAZZ

Jazz music

+02

+03

OFF

“MODE” flashes on the upper

part of the display.

Note:

You can adjust each sound mode to your preference.

Once you make an adjustment, it is automatically

stored for the currently selected sound mode. See

“Adjusting the sound” on page 24.

2 Press EQ (equalizer) while “MODE”

is still flashing on the display.

The last selected sound

mode is recalled and applied

to the current source.

Sound mode indicator flashes.

Ex.: If you have selected “USER” previously

3 Select the sound mode you want.

Each time you press the

button, the sound modes

change as follows:

USER

JAZZ

ROCK

CLASSIC

POPS

HIP HOP

Sound mode indicator flashes.

Ex.: When you select “ROCK”

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the sound

2 Adjust the setting.

To increase the level or

turn on the loudness

You can adjust the sound characteristics to your

preference.

1 Select the item you want to adjust.

Each time you press the

To decrease the level or

turn off the loudness

button, the adjustable items

change as follows:

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

LOUD

BAL

Equalization pattern changes

as you adjust the bass or treble.

(volume)

(loudness)

(balance)

Ex. 1: When you adjust “TRE” (treble)

Indication

To do:

Range

BAS*¹

TRE*¹

FAD*²

BAL

Adjust the bass.

–06 (min.)

+06 (max.)

Adjust the treble.

–06 (min.)

+06 (max.)

Ex. 2: When you turn on the loudness

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

3 Repeat steps 1 and 2 to adjust the

other items.

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

page 23.

LOUD*¹

Boost low and high

frequencies to

LOUD ON

produce a well-

balanced sound

at low volume level.

LOUD OFF

VOL*³

Adjust the volume. 00 (min.)

50 (max.)

When you adjust the bass, treble, or loudness, the

adjustment you have made is stored for the

currently selected sound mode (C-EQ) including

“USER.”

If you are using a two-speaker system, set the fader

level to “00.”

Normally the control dial works as the volume

control. So you do not have to select “VOL” to

adjust the volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER MAIN FUNCTIONS

Changing the general settings

(PSM)

3 Adjust the PSM item selected.

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode)

control.

Basic Procedure

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 26.)

Ex.: When you select “AUDIO 2”

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the setting.

2 Select the PSM item you want to

adjust.

Ex.: When you select “LEVEL”

Download from Www.Somanuals.com. All Manuals Search And Download.

Preferred Setting Mode (PSM) items

• For detailed operations of each PSM items, refer to the pages listed in the table.

Factory-preset See

Indications

Selectable values/items

settings

0 (0:00)

00 (0:00)

24H

page

CLOCK H

CLOCK M

24H/12H

Hour adjustment

0 – 23 (1 – 12)

00 – 59

Minute adjustment

24/12-hour time display

12H

OFF

24H

AUTO ADJ Automatic clock setting

CLOCK

TU DISP

AF-REG

Clock display

Tuner display

OFF

PS NAME

FREQ

AF REG

PS NAME

Alternative frequency/

Regionalization reception

12, 13

OFF*¹

29 programme types

(see page 18)

PTY STBY PTY standby

OFF

TA VOL

Traffic announcement

volume

VOL 00 – VOL 50

VOL 20

OFF

P-SEARCH Programme search

OFF

AF OFF

DAB AF*²

Alternative frequency

AF ON

VOL 00

AUDIO 2

DAB VOL*²DAB volume adjustment

VOL –12

AUDIO 1

VOL 12

LEVEL

DIMMER

TEL

Level display

AUDIO 2

OFF

Dimmer mode

Telephone muting

AUTO

OFF

AUTO

MUTING 1

OFF

MUTING 2

BEEP

Key-touch tone

Scroll mode

OFF

SCROLL

ONCE

AUTO

ONCE

OFF

B.SKIP

Blank skip

OFF

EXT IN*³

TAG DISP

External component

Tag display

CHANGER

TAG OFF

LINE IN

TAG ON

CHANGER

TAG ON

Displayed only when the “DAB AF” is set to “AF OFF.”

Displayed only when the DAB tuner is connected.

Displayed only when one of the following sources is selected—FM, AM, and TAPE.

Download from Www.Somanuals.com. All Manuals Search And Download.

To set the clock display—CLOCK

To select the level meter—LEVEL

You can set the clock to be shown on the display

when the unit is turned on.

You can select the level meter display according

to your preference.

When shipped from the factory, the clock is set to

be shown on the display.

When shipped from the factory, “AUDIO 2” is

selected.

• ON:

• OFF:

Clock display is turned on.

Clock display is turned off. When

“OFF” is selected, the other

information (see table below)

appears instead of the clock

display (except when “LINE IN” is

selected as the source).

• AUDIO 1: Shows the audio level indicator.

• AUDIO 2: Alternates “AUDIO 1” setting and

illumination display.

• OFF:

Erases the audio level indicator.

To select the dimmer mode—DIMMER

When you turn on the car headlights, the display

automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer

mode is activated.

When CLOCK is set to OFF:

Source

Initial

Pressing DISP

(display)

indication

Tuner

(FM/AM/

DAB)

Band

• AUTO:

• OFF:

• ON:

Activates Auto Dimmer.

Cancels Auto Dimmer.

Always dims the display.

Clock appears for about

5 seconds.

TAPE

“TAPE” or

disc number

Note:

Auto Dimmer equipped with this unit may not work

correctly on some vehicles, particularly on those

having a control dial for dimming.

CD-CH

In this case, set the dimmer mode to “ON” or “OFF.”

When CLOCK is set to ON:

Source

Initial

indication

Pressing DISP

(display)

To select the telephone muting—TEL

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2,”

whichever mutes the sounds from this unit.

When shipped from the factory, this mode is

deactivated.

Tuner

(FM/AM/

DAB)

Clock

Band appears for about

5 seconds.

TAPE

Clock

“TAPE” appears for

about 5 seconds.

CD-CH Clock

Disc number and track/

file number appear

• MUTING 1: Selects this if this setting can mute

the sounds while using the cellular

phone.

alternately each time

you press the button.

• MUTING 2: Selects this if this setting can mute

the sounds while using the cellular

phone.

• OFF:

Cancels the telephone muting.

Download from Www.Somanuals.com. All Manuals Search And Download.

To turn the tag display on or off

To turn on/off the key-touch tone—BEEP

—TAG DISP

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

When shipped from the factory, the key-touch

tone is activated.

This function takes effect only when JVC

MP3-compatible CD changer is connected.

An MP3 file can contain file information called

“ID3 Tag” where its album name, performer, track

title, etc. are recorded.

• ON:

• OFF:

Activates the key-touch tone.

Deactivates the key-touch tone.

There are two versions—ID3v1 (ID3 Tag version

1) and ID3v2 (ID3 Tag version 2). Only ID3v1 can

be shown.

When shipped from the factory, “TAG ON” is

selected.

To select the scroll mode—SCROLL

You can select the scroll mode for the disc

information (when the entire text cannot be

shown at once).

When shipped from the factory, scroll mode is set

to “ONCE.”

• TAG ON:

Turns on the ID3 tag display while

playing MP3 files.

• If an MP3 file does not have ID3

tags, folder name and file name

appear.

• ONCE:

• AUTO:

Scrolls only once.

Repeats the scroll (5-second

intervals in between).

Cancels scroll mode.

Note:

• OFF:

If you change the setting from

“TAG OFF” to “TAG ON” while

playing an MP3 file, the tag display

will be activated when the next file

starts playing.

Note:

Even if the scroll mode is set to “OFF,” you can scroll

the display by pressing DISP (display) for more than

one second.

• TAG OFF: Turns off the ID3 tag display while

playing MP3 files. (Only the folder

name and file name can be

shown.)

To select the external component to use

—EXT IN

You can connect the external component to the

CD changer jack on the rear using the Line Input

Adapter KS-U57 (not supplied).

To use the external component as the playback

source through this unit, you need to select

which component—CD changer or external

component—to use.

When shipped from the factory, CD changer is

selected as the external component.

• CHANGER: To use the CD changer.

• LINE IN:

To use the external component

other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

Download from Www.Somanuals.com. All Manuals Search And Download.

Attaching the control panel

Detaching the control panel

1 Insert the right side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the left side of the control

panel to fix it to the panel holder.

2 Pull the control panel out of the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

Download from Www.Somanuals.com. All Manuals Search And Download.

CD CHANGER OPERATIONS

We recommend that you use the JVC MP3-

compatible CD changer with your unit.

About MP3 discs

MP3 “files (tracks)” can be recorded in

“folders”—in PC terminology.

During recording, the files and folders can be

arranged in a way similar to arranging files and

folders of computer data.

“Root” is similar to the root of a tree. Every file

and folder can be linked to and be accessed from

the root.

By using this CD changer, you can play back

your original CD-Rs (Recordable) and CD-RWs

(Rewritable) recorded either in audio CD format

or in MP3 format.

• You can also connect other CH-X series

CD changers (except CH-X99 and CH-X100).

However, they are not compatible with MP3

discs, so you cannot play back MP3 discs.

• You cannot use the KD-MK series CD

changers with this unit.

Hierarchy

Level 1

ROOT

Level 2

Level 3

Level 4

Level 5

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “NO DISC” will appear on the display.

If this happens, remove the magazine and

set the discs correctly.

• If no magazine is loaded in the CD changer,

“NO MAG” appears on the display. If this

happens, insert the magazine in the CD

changer.

: Folders and their playback order

: MP3 files and their playback order

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

Playing discs

Select the CD changer (CD).

TAPE

CD*¹

*¹If you have changed the “EXT IN” setting to

“LINE IN” (see page 28), you cannot select the CD

changer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes:

• When the current disc is an MP3 disc:

Playback starts from the first folder of the

current disc once file check is completed.

Selected disc number*²

• When you press TAPE CD-CH, the power

automatically comes on. You do not have to press

to turn on the power.

• If you change the source, CD changer play also

stops. Next time you select the CD changer as the

source, CD changer play starts from where

playback has been stopped previously.

• When you start playing back a CD Text or an MP3

disc, disc information will automatically appear on

the display. (See the explanation that follows.)

To change the display information

While playing back an MP3 file or CD Text, you

can change the disc information shown on the

display.

Folder or album name*³

Each time you press DISP

(display), the display changes to

show the following:

For MP3 discs

• When “TAG DISP” is set to “TAG ON” (initial

setting: see page 28)

(folder) indicator

MP3 indicator

When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

If some MP3 files are recorded without being

included in a folder, they are played back first

and “ROOT” appears as the folder name.

Album name / performer

(folder name*⁵)

(TAG lights up on the display)

Track title (file name*⁵)

• When the current disc is a CD:

Playback starts from the first track of the

current disc.

(TAG lights up on the display)

Selected disc number*⁴

Elapsed playing time and

Current file number

*⁵If an MP3 file does not have ID3 tags, folder name

and file name appear. In this case, the TAG

indicator will not light up on the display.

Current track

Elapsed playing time number

When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

• When “TAG DISP” is set to “TAG OFF”

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the CD

changer is playing).

Folder name

(

lights up on the display)

File name

lights up on the display)

Elapsed playing time and

Current file number

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than

one second.

For CD Text discs

Each time you press the button,

the display changes as follows:

To fast-forward or reverse the track/file

Press and hold ¢

during play, to fast-forward

the track/file.

Disc title / performer

Press and hold 4

during play, to reverse the

track/file.

Track title

lights up on the display)

(

Elapsed playing time and

Current track number

Note:

During this operation on an MP3 disc, you can only

hear intermittent sounds. (The elapsed playing time

also changes intermittently on the display.)

Notes:

• The display shows up to 8 characters at one

time and scrolls if there are more than 8

characters.

See also “To select the scroll mode—SCROLL”

on page 28.

To go to the next or previous tracks/files

Press ¢

briefly

during play, to skip ahead

to the beginning of the

next track/file.

Some characters or symbols will not be shown

(and be blanked) on the display.

Each time you press the

button consecutively, the

beginning of the next

tracks/files is located and

played back.

(Ex. “ABCå!d#” ]“ABCA D ”)

• When you press DISP (display) while playing

an audio CD, “NO NAME” appears for the

disc title/performer and the track title.

Press 4

briefly during play, to skip back to

the beginning of the current track/file.

Each time you press the button consecutively,

the beginning of the previous tracks/files is

located and played back.

Download from Www.Somanuals.com. All Manuals Search And Download.

This operation is only possible when

using JVC MP3-compatible CD changer

(CH-X1500).

How to go to the desired track/file quickly

• Ex. 1: To select track/file number 32 while

playing track/file number 6

To go to a track/file quickly

1 Press MODE to enter the functions mode while

playing a disc.

(Three times)

(Twice)

“MODE” flashes on the upper

Track/file 6 \ 10 \ 20 \ 30 \ 31 \ 32

part of the display.

• Ex. 2 :To select track/file number 8 while

2 Press 5 (up) or ∞ (down) while still in the

functions mode.

playing track/file number 36

To skip 10 tracks/files*

forwards to the last track/file

(Three times)

(Twice)

Track/file 36 \ 30 \ 20 \ 10 \ 9 \ 8

To skip 10 tracks/files*

backwards to the first track/file

To skip to the next or previous folder

(only for MP3 discs)

* The first time you press 5 (up) or ∞ (down)

button, the track/file skips to the nearest

higher or lower track/file with a track/file

number of multiple ten (ex. 10th, 20th, 30th).

Then each time you press the button, you can

skip 10 tracks/files (see “How to go to the

desired track/file quickly” on the right column).

• After the last track/file, the first track/file will

be selected, and vice versa.

Press 5 (up) while playing an

MP3 disc, to go to the next

folder.

Each time you press the button

consecutively, the next folder is

located, and the first file in the

folder starts playback.

Note:

Press ∞ (down) while playing an MP3 disc, to go

to the previous folder.

Each time you press the button consecutively,

the previous folder is located, and the first file in

the folder starts playback.

If the current playing disc is an MP3 disc, files are

skipped within the same folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back tracks/files repeatedly

(Track Repeat/Folder Repeat/Disc Repeat

Play)

Selecting the playback modes

To play back tracks/files at random

(Folder Random/Disc Random/Magazine

Random Play)

1 Press MODE to enter the functions

mode during play.

“MODE” flashes on the upper part

of the display.

1 Press MODE to enter the functions

mode during play.

“MODE” flashes on the upper part

of the display.

2 Press RPT (repeat), while “MODE”

is still flashing on the display.

Each time you press the button, the

repeat play mode changes as

follows:

2 Press RND (random), while

“MODE” is still flashing on the

display.

For MP3 discs:

Each time you press the button, the

random play mode changes as

follows:

TRK RPT

FLDR RPT

DISC RPT

Canceled

For MP3 discs:

For CDs:

FLDR RND

Canceled

DISC RND

MAG RND

TRK RPT

DISC RPT

Canceled

For CDs:

DISC RND

MAG RND

Canceled

(disc) and RPT indicators

Ex.: When you select “DISC RPT”

RND indicator

Ex.: When you select “MAG RND”

Note:

The MP3 indicator also lights up if the current playing

disc is an MP3 disc.

Note:

The MP3 indicator also lights up if the current playing

disc is an MP3 disc.

Active

indicator

Mode

Plays repeatedly

TRK RPT

RPT indicator The current (or

Active

Mode

Plays at random

lights up.

and RPT

indicators

light up.

specified) track/

file.

indicator

and RND All files of the

indicators current folder, then

light up.

FLDR RND*

FLDR RPT*

All files of the

current (or

specified) folder of

the current disc.

files of the next

folder and so on.

DISC RND

and RND All tracks/files of

indicators

light up.

DISC RPT

and RPT All tracks/files of

indicators light the current (or

the current (or

specified) disc.

up.

specified) disc.

MAG RND RND indicator All tracks/files of

lights up. the inserted discs.

* “FLDR RPT” is only applicable for MP3 discs.

* “FLDR RND” is only applicable for MP3 discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL COMPONENT OPERATIONS

Playing an external component

2 Turn on the connected component

and start playing the source.

You can connect the external component to the

CD changer jack on the rear using the Line Input

Adapter KS-U57 (not supplied).

3 Adjust the volume.

Preparations:

• For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

• Before operating the external component using the

following procedure, select the external input

correctly. See “To select the external component to

use—EXT IN” on page 28.

4 Adjust the sound characteristics as

you want. (See pages 23 and 24.)

1 Select the external component

(LINE IN).

TAPE

LINE IN*

• If “LINE IN”* does not appear on the display,

see page 28 and select the external input

(“LINE IN”).

* Displayed only when one of the following sources is

selected—FM, AM, and TAPE.

Note on One-Touch Operation:

When you press TAPE CD-CH, the power

automatically comes on. You do not have to press

to turn on the power.

Download from Www.Somanuals.com. All Manuals Search And Download.

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio

Broadcasting) tuner KT-DB1500 or KT-DB1000

with your unit.

If you have another DAB tuner, consult your JVC

IN-CAR ENTERTAINMENT dealer.

• Refer also to the Instructions supplied with

your DAB tuner.

Tuning in to an ensemble and

one of the services

A typical ensemble has 6 or more programmes

(services) broadcast at the same time. After

tuning in to an ensemble, you can select a

service you want to listen to.

Before you start....

Press FM AM (DAB) briefly if tape, CD changer,

or external component is the current source.

What is DAB system?

DAB is one of the digital radio broadcasting

systems available today. It can deliver CD

quality sound without any annoying

interference and signal distortion.

Furthermore, it can carry text, pictures, and

data.

In contrast to FM broadcast, where each

programme is transmitted on its own

frequency, DAB combines several

programmes (called “services”) to form one

“ensemble.”

1 Select the DAB tuner.

Each time you press and

hold the button, the DAB

tuner and the FM/AM tuner

are alternately selected.

DAB

FM/AM

2 Select the DAB band (DAB1, DAB2,

or DAB3).

In addition, each “service”—called “primary

service”—can also be divided into its

components (called “secondary service”).

Each time you press the

button, the DAB band

changes as follows:

With the DAB tuner connected with this unit,

you can enjoy these DAB services.

DAB1

(D1)

DAB2

(D2)

DAB3

(D3)

Note:

When reception switches between DAB and FM, the

listening volume level may increase or decrease

inconveniently. This change in the volume level results

from unequal audio injection levels at broadcaster

site, but not from the malfunction of this unit.

To prevent this inconvenience, you can adjust the DAB

volume level. (See “To adjust the DAB volume level”

on page 39.)

This receiver has three DAB bands (DAB1,

DAB2, DAB3). You can use any of them to tune

in to an ensemble.

Download from Www.Somanuals.com. All Manuals Search And Download.

To tune in to a particular ensemble

without searching

3 Start searching for an ensemble.

To search for

Before you start....

Press FM AM (DAB) briefly if tape, CD changer,

or external component is the current source.

ensembles of higher

frequency

1 Press and hold FM AM (DAB) to select DAB

tuner as the source.

2 Press FM AM (DAB) repeatedly to select the

DAB band (DAB1, DAB2, or DAB3).

To search for

ensembles of lower

frequency

When an ensemble is received, searching

stops.

3 Press and hold ¢

or 4

for more

than one second. “MANU” (manual) appears

on the display.

4 Press ¢

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

or 4

repeatedly until the

ensemble you want is reached.

• If you hold down the button, the frequency

keeps changing until you release the button.

5 Press 5 (up) or ∞ (down) to select a service

(either primary or secondary) you want to

listen to.

4 Select a service (either primary or

secondary) you want to listen to.

To select the next service

(If a primary service has

some secondary services,

they are selected before

the next primary service is

selected.)

To restore the FM/AM tuner

Press and hold FM AM (DAB) again.

Storing DAB services in

memory

To select the previous service (either

primary or secondary)

You can preset up to 6 DAB services in each

DAB band (DAB1, DAB2, and DAB3) manually.

To change the display information while

tuning in to an ensemble

Normally service name is shown on the display.

If you want to check the ensemble name or its

frequency, press DISP (display).

Before you start....

Press FM AM (DAB) briefly if tape, CD changer,

or external component is the current source.

1 Select the DAB tuner.

Each time you press and

hold the button, the DAB

tuner and the FM/AM tuner

are alternately selected.

Each time you press the button,

the following information appears

for a while in the main display.

DAB

FM/AM

Service name

2 Select the DAB band (DAB1, DAB2,

or DAB3) you want.

Ensemble name

Channel number

Frequency

Each time you press the

button, the DAB band

changes as follows:

DAB1

(D1)

DAB2

(D2)

DAB3

(D3)

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning in to a preset DAB

service

3 Tune in to an ensemble you want.

You can easily tune in to a preset DAB service.

Remember that you must store services first. If

you have not stored them yet, “Storing DAB

services in memory” on pages 37 and 38.

4 Select a service of the ensemble you

want to listen to.

Before you start....

Press FM AM (DAB) briefly if tape, CD changer,

or external component is the current source.

To select the next service

1 Select the DAB tuner.

Each time you press and

hold the button, the DAB

tuner and the FM/AM tuner

are alternately selected.

To select the previous

service

DAB

FM/AM

5 Press and hold the number button

(in this example, 1) you want to store

the selected service into for more

than 2 seconds.

2 Select the DAB band (DAB1, DAB2,

or DAB3) you want.

Each time you press the

button, the DAB band

changes as follows:

DAB1

(D1)

DAB2

(D2)

DAB3

(D3)

Selected band/preset number and “MEMO”

(memory) appear alternately for a while.

3 Select the number (1 – 6) for the

preset DAB service (primary) you

want.

6 Repeat the above procedure to store

other DAB services into other preset

numbers.

Notes:

Note:

• You can only preset primary DAB services. If you

store a secondary service, its primary service will

be stored instead.

If the selected primary service has some secondary

services, pressing the same number button repeatedly

will tune in to the secondary services.

• A previously preset DAB service is erased when a

new DAB service is stored in the same preset

number.

• Preset DAB services are erased when the power

supply to the memory circuit is interrupted (for

example, during battery replacement). If this

occurs, preset the DAB services again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note:

What you can do more with

DAB

When Alternative Reception (for DAB services) is

activated, Network-Tracking Reception (for RDS

stations: see page 12) is also activated automatically.

On the other hand, Network-Tracking Reception

cannot be deactivated without deactivating

Alternative Reception.

Tracing the same program automatically

(Alternative Reception)

You can keep listening to the same program.

• While receiving a DAB service:

When driving in an area where a service

cannot be received, this unit automatically

tunes in to another ensemble or FM RDS

station, broadcasting the same program.

• While receiving an FM RDS station:

When driving in an area where a DAB service

is broadcasting the same program as the

FM RDS station is broadcasting, this unit

automatically tunes in to the DAB service.

To adjust the DAB volume level

You can adjust the volume level of DAB tuner

and store it in memory. By adjusting the volume

level properly to match it to the FM sound level,

you will not need to adjust the volume level each

time you change the source.

When shipped from the factory, DAB volume

level is set at “00.”

• See also “Changing the general settings

(PSM)” on page 25.

Note:

When reception switches between DAB and FM, the

listening volume level may increase or decrease

inconveniently. This change in the volume level results

from unequal audio injection levels at broadcaster

site, but not from the malfunction of this unit.

To prevent this inconvenience, you can adjust the DAB

volume level (see the right column).

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

or 4

to select “DAB VOL”

(DAB volume).

3 Turn the control dial to set to the desired

volume.

You can set it from “VOL –12” to “VOL 12.”

4 Press SEL (select) to finish the setting.

To use Alternative Reception

When shipped from the factory, Alternative

Reception is activated.

• See also “Changing the general settings

(PSM)” on page 25.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

or 4

(alternative frequency).

to select “DAB AF”

3 Turn the control dial to select the desired

mode.

• AF ON: Traces the program among DAB

services and FM RDS stations

—Alternative Reception. The AF

indicator lights up on the display

(see page 12).

• AF OFF: Alternative Reception is

deactivated.

4 Press SEL (select) to finish the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the Adjust it to the optimum level.

minimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work at

all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

Press the reset button on the

panel holder after detaching the

control panel. (The clock setting

and preset stations stored in

memory are erased.)

(See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Signals are too weak.

Store stations manually.

• Static noise while listening

to the radio.

The aerial is not connected

firmly.

Connect the aerial firmly.

• A cassette tape cannot be

ejected.

Cassette is locked.

Unlock the cassette.

(See page 22.)

• A cassette tape cannot be

inserted.

You have tried to insert a

cassette in the wrong way.

Insert the cassette with the

exposed tape facing right.

• Cassette tapes become

hot.

This is not a malfunction.

The tape head is dirty.

• Tape sound is at very low

level and sound quality is

degraded.

Clean it with a head cleaning

tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

Causes

Remedies

• “NO DISC” appears on the

display.

No disc is in the magazine.

Insert discs into the

magazine.

Discs are inserted upside down. Insert discs correctly.

Discs are unplayable.

Insert playable discs.

Insert the magazine.

• “NO MAG” appears on the

display.

No magazine is loaded in the

CD changer.

• “NO FILES” appears on the The current disc does not

Insert a disc that contains

MP3 files.

display.

contain any MP3 files.

• MP3 disc is skipped or

cannot be played back.

MP3 files do not have the

extension code—mp3 in their

file names.

Add the extension code

—mp3 to their file names.

MP3 files are not recorded in

the format compliant with ISO

Change the disc.

(Record MP3 files using a

9660 Level 1, Level 2, or Joliet. compliant application.)

• Noise is generated while

playing an MP3 disc.

The file played back is not an

MP3 file (although it has the

extension code—mp3).

Skip to another file or change

the disc. (Do not add the

extension code—mp3 to non-

MP3 files.)

• A longer readout time is

required for an MP3 disc

(“CHECK” keeps flashing on configuration.

the display).

Readout time varies due to the

complexity of the folder/file

Do not use too many

hierarchies and folders. Also,

do not record any other types

of audio tracks together with

MP3 files.

• MP3 files cannot be played

back as you have intended

them to play.

Playback order is determined

when the files are recorded.

• Elapsed playing time is not

correct for an MP3 disc.

This sometimes occurs during

play. This is caused by how the

files are recorded on the disc.

• “RESET 8” appears on the

display.

This unit is not connected to the Connect this unit and the

CD changer correctly.

CD changer correctly and

press the reset button of the

CD changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the

CD changer.

• The CD changer does not

work at all.

The built-in microcomputer may Press the reset button on the

have function incorrectly due to panel holder after detaching

noise, etc.

the control panel. (The clock

setting and preset stations

stored in memory are

erased.) (See page 2.)

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

This unit requires very little attention, but you will

be able to extend the life of the unit if you follow

the instructions below.

CAUTION:

• Do not play the cassettes with peeling labels;

otherwise, they can damage the unit.

• Tighten tapes to remove slack since loose tape

may become entangled with the mechanism.

• Do not leave a cassette in the cassette

compartment after use, as the tape may become

slack.

To clean the head

The function below is also provided to ensure the

longer life of this unit.

Ignition key-off release/Ignition key-on

play

• Turning off the ignition key with a cassette in

the compartment automatically releases the

tape from the unit’s tapehead.

• Turning on the ignition key with a cassette in

the compartment starts playback automatically

if you turned off the ignition during tape play.

• Clean the heads after every 10 hours of use

using a wet-type head cleaning tape (available

at an audio store).

When the head becomes dirty, you may realize

the following symptoms:

– Sound quality is reduced.

– Sound level decreases.

– Sound drops out.

• Do not play dirty or dusty tapes.

• Do not touch the highly-polished head with any

metallic or magnetic tools.

To keep the tape clean

• Always store the cassettes in their storage

cases after use.

• Do not store cassettes in the following places:

– Subject to direct sunlight

– With high humidity

– At extremely hot temperatures

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

CASSETTE DECK SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60)

Frequency Response (Dolby B NR OFF):

30 Hz to 16 000 Hz (Normal tape)

Signal-to-Noise Ratio: 56 dB (Normal tape)

(Dolby B NR ON): 65 dB

Front:

Rear:

50 W per channel

Continuous Power Output (RMS):

Front:

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

(Dolby B NR OFF): 56 dB

Stereo Separation: 40 dB

Rear:

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Tone Control Range:

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (250 nWb/m)

Output Impedance: 1 kΩ

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

188 mm × 58 mm × 12 mm

Mass (approx.):

TUNER SECTION

Frequency Range:

1.5 kg (excluding accessories)

FM1/FM2: 87.5 MHz to 108.0 MHz

FM3:

AM:

65.00 MHz to 74.00 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

Design and specifications are subject to change

without notice.

[FM Tuner]

Usable Sensitivity:

11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Download from Www.Somanuals.com. All Manuals Search And Download.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Затруднения при эксплуатации?

Пожалуйста, перезагрузите Ваше

устройство

Для получения информации о перезагрузке Вашего

устройства обратитесь на соответствующую страницу

EN, RU

0403KKSMDTJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

KS-FX945R

Installation/Connection Manual

Руководство по установке/подключению

GET0122-002A

[EE]

0403KKSMDTJEIN

EN, RU

ENGLISH

РУССКИЙ

• This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems.

• Это устройство разработано для эксплуатации на 12 В постоянного напряжения с минусом на массе.

INSTALLATION (IN-DASH MOUNTING)

УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ)

• The following illustration shows a typical installation. However, you should make adjustments corresponding

to your specific car. If you have any questions or require information regarding installation kits, consult your

JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits.

• На следующих иллюстрациях показана типовая установка. Тем не менее, Вы должны сделать

поправки в соответствии с типом Вашего автомобиля. Если у Вас есть какие-либо вопросы,

касающиеся установки, обратитесь к Вашему дилеру JVC IN-CAR ENTERTAINMENT или в компанию,

поставляющую соответствующие принадлежности.

1 Before mounting: Press

(control panel release button) to detach the control panel if already

1 Перед установкой: Нажмите кнопку

(кнопка освобождения панели управления) для

отсоединения панели управления, если она уже прикреплена.

attached.

* When shipped from the factory, the control panel is packed in the hard case.

* При отправке с завода панель управления упакована в твердую коробку.

2 Remove the trim plate.

2 Удалите декоративную панель.

3 Remove the sleeve after disengaging the sleeve locks.

3 Удалите муфту после освобождения запоров муфты.

1 Stand the unit.

1 Установите устройство.

Примечание: Устанавливайте устройство таким образом, чтобы не повредить

предохранитель, расположенный сзади.

Note: When you stand the unit, be careful not to damage the fuse on the rear.

2 Insert the 2 handles between the unit and the sleeve, as illustrated, to disengage the sleeve locks.

3 Remove the sleeve.

2 Вставьте два рычага между устройством и муфтой, как показано на рисунке, для

освобождения запоров муфты.

Note: Be sure to keep the handles for future use after installing the unit.

3 Удалите муфту.

4 Install the sleeve into the dashboard.

Примечание: После установки устройства сохраните рычаги для использования в будущем.

* After the sleeve is correctly installed into the dashboard, bend the appropriate tabs to hold the sleeve

firmly in place, as illustrated.

4 Установите муфту в приборную панель.

* После установки муфты в приборную панель согните соответствующие зубцы для фиксации

муфты, как показано на рисунке.

5 Fix the mounting bolt to the rear of the unit’s body and place the rubber cushion over the end of the bolt.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

5 Затяните Крепежный болт на задней части корпуса устройства и наденьте резиновый чехол на

конец болта.

6 Выполните необходимые подключения контактов, как показано на оборотной стороне этой

8 Attach the trim plate.

инструкции.

Note: Ensure the recessed part is at the bottom. If not, the control panel will not open completely.

7 Задвиньте устройство в муфту до упора.

8 Установите декоративную панель.

9 Attach the control panel.

Примечание: Обеспечьте, чтобы часть с выемкой была внизу. Если это не так, то панель

управления полностью не откроется.

9 Прикрепите панель управления.

Control panel

Панель управления

Trim plate

Декоративную панель

Handle

Рычаг

Dashboard

Приборная панель

Rubber cushion

Резиновый чехол

Lock Plate

Фиксирующая панель

184 mm

Slot

Отверстие

53 mm

Sleeve

Муфта

Fuse

Предохранитель

Mounting bolt

Крепежный болт

4 *

See “ELECTRICAL CONNECTIONS.”

Смотрите “ЭЛЕКТРИЧЕСКИЕ

ПОДКЛЮЧЕНИЯ”.

Sleeve

Муфта

Control panel

Панель управления

Trim plate

Декоративную панель

Download from Www.Somanuals.com. All Manuals Search And Download.

• When using the optional stay

• When installing the unit without using the sleeve

• При использовании дополнительной стойки

• При установке устройства без использования муфты

In a Toyota for example, first remove the car radio and install the unit in its place.

В автомобилях “Toyota”, например, сначала удалите автомобильную магнитолу, затем установите на ее место

это устройство.

Stay (option)

Стойка

(дополнительно)

Washer

Шайба

Fire wall

Стена

* Not included with this unit.

* Не входят в комплект.

Flat type screws (M5 x 6 mm)*

Крепежные винты (M5 x 6 мм)*

Dashboard

Приборная панель

Lock nut

Фиксирующая гайка

Bracket*

Кронштейн*

Screw (option)

Винт (дополнительно)

Sleeve

Муфта

Pocket

Карман

Flat type screws (M5 x 6 mm)*

Mounting bolt

Крепежные винты (M5 x 6 мм)*

Крепежный болт

Bracket*

Кронштейн*

Install the unit at an angle of less than

30˚.

Установите устройство под углом

менее 30°.

Less than 30˚

Менее 30°

Note

: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer

screws are used, they could damage the unit.

Примечание : При установке устройства на крепежный кронштейн, используйте только винты длиной 6 мм.

При использовании более длинных винтов можно повредить устройство.

Удаление устройства

• Перед удалением устройства освободите заднюю часть.

Removing the unit

• Before removing the unit, release the rear section.

Удалите панель управления.

Удалите декоративную панель.

Remove the control panel.

Remove the trim plate.

Вставьте 2 рычаги в отверстия, как показано на иллюстрации. Затем, плавно раздвигая рычаги в

стороны, выньте устройство. (После установки сохраните рычаги.)

Insert the 2 handles into the slots, as shown. Then, while gently pulling the handles away from each

other, slide out the unit. (Be sure to keep the handles after installing it.)

Handle

Рычаг

Control panel

Панель управления

Trim plate

Декоративную панель

Parts list for installation and connection

The following parts are provided with this unit.

After checking them, please set them correctly.

Список деталей для установки и подключения

Следующие детали поставлены в комплекте с устройством.

После проверки комплектации, пожалуйста, установите их правильно.

Hard case/Control panel

Жесткий футляр/панель управления

Sleeve

Муфта

Trim plate

Декоративную панель

Power cord

Кабель питания

Handles

Рычаги

Washer (ø5)

Шайба (њ5)

Lock nut (M5)

Фиксирующая гайка (M5)

Mounting bolt (M5 x 20 mm)

Крепежный болт (M5 x 20 мм)

Rubber cushion

Резиновый чехол

Battery

Батарейка

Remote controller

Устройство дистанционного

управления

CR2025

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

РУССКИЙ

ELECTRICAL CONNECTIONS

To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all

electrical connections before installing the unit. If you are not sure how to install this unit correctly, have it

installed by a qualified technician.

ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ

Для предотвращения коротких замыканий мы рекомендуем Вам отсоединить отрицательный разъем

аккумулятора и осуществить все подключения перед установкой устройства. Если Вы не знаете точно,

как следует устанавливать это устройство, обратитесь к квалифицированному специалисту.

Примечание:

Note:

Это устройство разработано для эксплуатации на 12 В постоянного напряжения с минусом на массе.

Если Ваш автомобиль не имеет этой системы, требуется инвертор напряжения, который может быть

приобретен у дилера JVC IN-CAR ENTERTAINMENT.

• Заменяйте предохранитель другим предохранителем указанного класса. Если предохранитель

сгорает слишком часто, обратитесь к дилеру JVC IN-CAR ENTERTAINMENT.

• При появлении сильных помех...

Это устройство оснащено фильтром помех в цепи питания. Однако в некоторых случаях возможно

появление щелчков и других нежелательных помех. В этом случае подключите задний разъем

заземления этого устройства (см. схему подключения ниже) к шасси автомобиля при помощи более

коротких и толстых проводов. Если помехи не исчезают, обратитесь к дилеру JVC IN-CAR

ENTERTAINMENT.

This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have

this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.

• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• If noise is a problem...

This unit incorporates a noise filter in the power circuit. However, with some vehicles, clicking or other

unwanted noise may occur. If this happens, connect the unit’s rear ground terminal (see connection diagram)

to the car’s chassis using shorter and thicker cords, such as copper braiding or gauge wire. If noise still

persists, consult your JVC IN-CAR ENTERTAINMENT dealer.

• Maximum input of the speakers should be more than 50 W at the rear and 50 W at the front, with an

impedance of 4 Ω to 8 Ω.

• Максимальная входная мощность громкоговорителей должна быть больше 50 Вт сзади и 50 Вт

впереди при полном сопротивлении от 4 Ω до 8 Ω.

• Нe забудьте заземлить устройство на шасси автомобиля.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.

• Радиатор во время использования сильно нагревается. Старайтесь его не трогать во время удаления

устройства.

Heat sink

Радиатор

Typical Connections / Типичные подключения

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage Перед началом подключений: Тщательно проверьте проводку в автомобиле. Неправильное

to this unit.

подключение может привести к серьезному повреждению устройства.

Жилы силового кабеля и жилы соединителя от кузова автомобиля могут быть разного цвета.

The leads of the power cord and those of the connector from the car body may be different in color.

Connect the colored leads of the power cord to the car battery, speakers and power aerial (if any) in the

following sequence.

Подключите цветные провода кабеля питания к аккумулятору, громкоговорителям и автономной

антенне (если есть) в следующем порядке:

Black: ground

Черный: земля

Yellow: to car battery (constant 12 V)

Желтый: к аккумулятору (постоянный 12 В)

Красный: к вспомогательному разъему

Red: to an accessory terminal

Blue with white stripe: to remote lead of other equipment or power aerial if any (200 mA max.)

Orange with white stripe: to car light control switch

Brown: to cellular phone system (For details, refer to the instructions of the cellular phone.)

Others: to speakers

Синий с белой полосой: к удаленному проводу другого оборудования или антенны

(макс. 200 мА).

Оранжевый с белой полосой: к управляющему переключателю фонаря автомобиля

Коричневый: к системе сотового телефона (Детали смотрите в инструкции сотового

телефона.)

Connect the aerial cord.

Другие: к громкоговорителям

Finally connect the wiring harness to the unit.

Подключите кабель антенны.

Note: If your vehicle does not have any accessory terminal, move the fuse from the fuse position 1 (initial

position) to fuse position 2, and connect the red lead (A7) to the positive (+) battery terminal.

• The yellow lead (A4) is not used in this case.

В последнюю очередь подключите электропроводку к устройству.

Примечание: Если в Вашем автомобиле никакого вспомогательного разъема не имеется, переставьте

предохранитель из положения 1 предохранителя (первоначальное положение) в положение 2

предохранителя и подключите красный провод (А7) к положительному (+) полюсу аккумулятора.

• Желтый провод (А4) в этом случае не используется.

JVC CD changer/DAB tuner or another

external component

Проигрыватель-автомат

компакт-дисков JVC/Тюнер

DAB или другой

We recommend you to connect the JVC MP3-compatible CD changer.You can also connect other CH-X series CD changers (except CH-X99 and CH-X100).

• You cannot use the KD-MK series CD changers with this unit.

You can also use an external component such as a portable MD player by connecting the Line Input Adapter KS-U57 (not supplied). (See diagram .)

Рекомендуется подключать совместимое с MP3 устройство автоматической смены компакт-дисков компании JVC. Кроме того, можно

подключать одно из устройств автоматической смены компакт-дисков серии CH-X (кроме CH-X99 и CH-X100).

• С данным устройством нельзя использовать устройства автоматической смены компакт-дисков серии KD-MK.

Вы можете также использовать внешний компонент, такой как портативный проигрыватель минидисков, подсоединив адаптер входной линии

KS-U57 (не поставляется). (См. схему .)

внешний компонент

B1 B3 B5 B7

Fuse position 2 / Положение 2 предохранителя

B2 B4 B6 B8

A5 A7

Fuse position 1 / Положение 1 предохранителя

A2 A4 A6 A8

B1 B3 B5 B7

B2 B4 B6 B8

A5 A7

A2 A4 A6 A8

15 A fuse

Not included with this unit.

Не входит в комплект.

Предохранитель 15A

Ignition switch

Переключатель зажигания

Rear ground terminal

Задний разъем

заземления

Aerial terminal

Разъем антенны

Black

To metallic body or chassis of the car

К металлическому корпусу или шасси автомобиля

Черный

Line out

(see diagram

To aerial

)

Yellow*¹

К антенне

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch)

К разъему фазы в блоке предохранителя

(минуя блок зажигания)

Желтый*¹

Линейный выход

(см. схему

)

Red

Красный

Fuse block

Блок предохранителя

To an accessory terminal in the fuse block

К вспомогательному разъему в блоке предохранителя

*1 : Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

*1 : Перед проверкой работы устройства подключите

этот провод, иначе питание не включится.

Blue with white stripe

Синий с белой полосой

To remote lead of other equipment or power aerial if any

К удаленному проводу другого оборудования или антенны

Orange with white stripe

Оранжевый с белой полосой

To car light control switch

К управляющему переключателю фонаря автомобиля

(ILLUMINATION)

Brown / Коричневый

To cellular phone system

К системе сотового телефона

Purple

Пурпурный

White with black stripe

Белый с черной

полосой

White

Белый

Gray with black stripe

Серый с черной

полосой

Gray

Green with black stripe

Green

Purple with black stripe

Серый Зеленый с черной

полосой

Зеленый Пурпурный с черной

полосой

Left speaker (front)

Левый громкоговоритель

(передний)

Right speaker (front)

Правый громкоговоритель

(передний)

Left speaker (rear)

Левый громкоговоритель

(задний)

Right speaker (rear)

Правый громкоговоритель

(задний)

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS on power supply and speaker connections:

• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be

seriously damaged.

ПРЕДОСТЕРЕЖЕНИЯ по питанию и подключению громкоговорителей:

• НЕ подключайте провода громкоговорителей к аккумулятору автомобиля, иначе

устройство будет повреждено.

• Connect the black lead (ground), yellow lead (to car battery, constant 12 V), and red lead (to an accessory

terminal) correctly.

• Правильно подключите черный провод (земля), желтый провод (в аккумулятор, постоянный ток

12 В) и красный провод (в вспомогательный разъем).

• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your • ПЕРЕД подключением проводов громкоговорителей к кабелю питания громкоговорителя

car.

проверьте схему соединений громкоговорителей в Вашем автомобиле.

– Если проводка громкоговорителей в Вашем автомобиле такая, как показано на

приводимых ниже Fig. 1 и Fig. 2, НЕ подключайте устройство с помощью первоначальной

проводки громкоговорителей.

Если Вы это сделаете, устройство будет серьезно повреждено. Переделайте проводку

громкоговорителей так, чтобы Вы могли подключить устройство к громкоговорителям, как это

показано на Fig. 3.

– If the speaker wiring in your car is as illustrated in Fig. 1 and Fig. 2 below, DO NOT connect the unit

using that original speaker wiring. If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as illustrated in Fig. 3, you can connect the unit using the original

speaker wiring in your car.

– If you are not sure of the speaker wiring of your car, consult your car dealer.

– Если проводка громкоговорителей в Вашем автомобиле такая, как показано на Fig. 3, Вы

можете подключить устройство с помощью первоначальной проводки громкоговорителей в

Вашем автомобиле.

– Если Вы не знаете соединение громкоговорителей в Вашем автомобиле, обратитесь к Вашему

автомобильному дилеру.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Подключение контактов

CAUTION / ПРЕДОСТЕРЕЖЕНИЕ:

Twist the core wires when connecting.

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Для предотвращения короткого замыкания заклейте НЕИСПОЛЬЗУЕМЫЕ концы

изолирующей лентой.

Закрутите концы проводов при соединении.

Solder the core wires to connect them securely.

Спаяйте провода для надежного

соединения.

Connections Adding Other Equipment / Подключение других устройств

You can connect an amplifier to upgrade your car stereo system.

Для обновления автомобильной стереосистемы Вы можете подключить усилитель.

• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be • Подсоедините провод внешнего устройства (синий с белой полосой) к проводу внешнего

controlled through this unit.

• For amplifier only:

устройства другого оборудования так, чтобы им можно было управлять с этого устройства.

• Только для усилителя:

– Connect this unit’s line-out terminals to the amplifier’s line-in terminals.

– Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of

this unit unused. (Cover the terminals of these unused leads with insulating tape, as illustrated

above.)

– Подключите выходные клеммы данного устройства к входным клеммам усилителя.

– Отсоедините громкоговорители от данного устройства, подключите их к усилителю.

Оставьте провода громкоговорителей данного устройства неиспользованными. (Замотайте

клеммы этих неиспользованных проводов изоляционной лентой, как показано выше.)

Amplifier / Усилитель

Rear speakers

Задние громкоговорители

Remote lead

Провод внешнего устройства

Y-connector (not supplied with this unit)

Разъем Y (не входит в комплект)

*2 : Firmly attach the ground wire to the

metallic body or to the chassis of the

car—to the place not coated with paint

(if coated with paint, remove the paint

before attaching the wire). Failure to do

so may cause damage to the unit.

INPUT

JVC Amplifier

JVC-усилитель

Blue with white stripe

Синий с белой полосой

*2 : Плотно прикрепите заземляющий

To power aerial if any

К питанию антенны, если есть

провод к металлическому кузову

или шасси автомобиля—в месте, не

покрытом краской (если оно

покрыто краской, удалите краску

Signal cord (not supplied with this unit)

Кабель сигнала (не входит в комплект)

OUT

LINE

INPUT

Front speakers

Передние

громкоговорители

JVC Amplifier

перед тем, как прикреплять

JVC-усилитель

провод). Невыполнение этого

требования может привести к

повреждению данного устройства.

REAR FRONT

KS-FX945R

Front speakers

Передние громкоговорители

You can connect another power amplifier for front speakers.

Вы можете подключить еще один усилитель мощности для передних динамиков.

CD Changer and DAB Tuner / Проигрыватель-автомат компакт-дисков и тюнер DAB

You can connect a JVC CD changer and/or a JVC DAB (Digital Audio Broadcasting) tuner.

• For their connections, refer to the Instructions supplied with them.

Вы можете подключить проигрыватель-автомат компакт-дисков JVC и/или тюнер DAB (цифровое

радиовещание) JVC.

• Порядок их подключения смотрите в прилагаемых к ним инструкциях.

Connecting cord supplied with your CD changer

Connecting cord supplied with your DAB tuner or CD changer

Соединительный кабель, поставляемый с Вашим тюнером DAB или проигрывателем-

автоматом компакт-дисков

Connecting cord supplied with your DAB tuner

Соединительный шнур входит в комплект

поставки приобретенного Вами тюнера DAB

Соединительный кабель, поставляемый с

Вашим проигрывателем-автоматом компакт-

дисков

JVC CD changer

Проигрывателем-автоматом

компакт-дисков JVC

или

JVC DAB tuner

Тюнер DAB JVC

JVC CD changer

Проигрывателем-автоматом

компакт-дисков JVC

JVC DAB tuner

Тюнер DAB JVC

KS-FX945R

CAUTION / ПРЕДУПРЕЖДЕНИЕ:

• Before connecting the CD changer and/or the DAB tuner, make sure that the unit is turned off.

• Перед подключением проигрывателя-автомата компакт-дисков и/или тюнера DAB убедитесь, что

данное устройство выключено.

• You can connect both components in series as illustrated above.

• Вы можете подключить оба компонента параллельно, как проиллюстрировано выше.

External Component / Внешний компонент

Line Input Adapter KS-U57 (not

supplied with this unit)

Адаптер входной линии

KS-U57 (не входит в комплект)

See the INSTRUCTIONS (separate volume) for how to use

the external component with this unit.

Для получения информации об использовании

внешнего устройства см. ИНСТРУКЦИИ ПО

External component

Внешний компонент

KS-FX945R

ЭКСПЛУАТАЦИИ (в отдельном издании).

Signal cord (not supplied with this unit)

Кабель сигнала (не входит в комплект)

CD changer jack

Гнездо проигрывателя-

автомата компакт-дисков

BЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ

• Сработал предохранитель.

TROUBLESHOOTING

• The fuse blows.

* Правильно ли подключены черный и красный провода?

* Are the red and black leads connected correctly?

• Питание не включается.

* Подключен ли желтый провод?

• Power cannot be turned on.

* Is the yellow lead connected?

• Звук не выводится через громкоговорители.

* Нет ли короткого замыкания на кабеле выхода громкоговорителей?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Звук искажен.

• Sound is distorted.

* Заземлен ли провод выхода громкоговорителей?

* Заземлены ли разъемы “–” правого (R) и левого (L) громкоговорителей?

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

• Устройство нагревается.

• Unit becomes hot.

* Заземлен ли провод выхода громкоговорителей?

* Заземлены ли разъемы “–” правого (R) и левого (L) громкоговорителей?

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

Download from Www.Somanuals.com. All Manuals Search And Download.

InFocus Projector IN32 User Manual
Invacare Car Seat 6905A User Manual
Jabra Headphones GN9330 User Manual
JBL Portable Speaker 406 000 05970 E User Manual
Johnson Controls Heat Pump 820900 UUM A 1011 User Manual
JVC Stereo System UX L36V User Manual
Kenwood Portable CD Player DPC 662 User Manual
Knoll Systems Stereo Amplifier GS12 User Manual
Kompernass Sewing Machine KH4000 User Manual
Konica Minolta Digital Camera S414 User Manual