JVC Camcorder GR AX47 User Manual

COMPACT VHS CAMCORDER  
GR-AX77/AX47  
Compact VHS  
(The camcorder illustrations appearing  
in the illustrations are of the GR-AX77.)  
For Customer Use:  
Enter below the Model No. and Serial  
No. which is located on the bottom of  
cabinet. Retain this information for  
future reference.  
INSTRUCTIONS  
Model No.  
Serial No.  
LYT0090-001B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
3
5. Ventilation  
IMPORTANT PRODUCT  
SAFETY INSTRUCTIONS  
Slots and openings in the cabinet are provided for  
ventilation. To ensure reliable operation of the product  
and to protect it from overheating, these openings must  
not be blocked or covered.  
Do not block the openings by placing the product on  
a bed, sofa, rug or other similar surface.  
Do not place the product in a built-in installation  
such as a bookcase or rack unless proper ventilation  
is provided or the manufacturer’s instructions have  
been adhered to.  
Electrical energy can perform many useful func-  
tions. But improper use can result in potential  
electrical shock or fire hazards. This product has  
been engineered and manufactured to assure your  
personal safety. In order not to defeat the built-in  
safeguards, observe the following basic rules for its  
installation, use and servicing.  
6. Wall or Ceiling Mounting  
The product should be mounted to a wall or ceiling  
only as recommended by the manufacturer.  
ATTENTION:  
Follow and obey all warnings and instructions  
marked on your product and its operating instruc-  
tions. For your safety, please read all the safety and  
operating instructions before you operate this  
product and keep this manual for future reference.  
ANTENNA INSTALLATION  
INSTRUCTIONS  
1. Outdoor Antenna Grounding  
If an outside antenna or cable system is connected to  
the product, be sure the antenna or cable system is  
grounded so as to provide some protection against  
voltage surges and built-up static charges. Article 810  
of the National Electrical Code, ANSI/NFPA 70,  
provides information with regard to proper grounding  
of the mast and supporting structure, grounding of the  
lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge  
unit, connection to grounding electrodes, and  
requirements for the grounding electrode.  
INSTALLATION  
1. Grounding or Polarization  
(A) Your product may be equipped with a polarized  
alternating-current line plug (a plug having one  
blade wider than the other). This plug will fit into  
the power outlet only one way. This is a safety  
feature.  
If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still  
fail to fit, contact your electrician to replace your  
obsolete outlet. Do not defeat the safety purpose of  
the polarized plug.  
2. Lightning  
For added protection for this product during a lightning  
storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will  
prevent damage to the product due to lightning and  
power-line surges.  
(B) Your product may be equipped with a 3-wire  
grounding-type plug, a plug having a third  
(grounding) pin. This plug will only fit into a  
grounding-type power outlet. This is a safety  
feature.  
3. Power Lines  
If you are unable to insert the plug into the outlet,  
contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the  
grounding-type plug.  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light  
or power circuits, or where it can fall into such power  
lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with  
them might be fatal.  
2. Power Sources  
Operate your product only from the type of power  
source indicated on the marking label. If you are not  
sure of the type of power supply to your home, consult  
your product dealer or local power company. If your  
product is intended to operate from battery power, or  
other sources, refer to the operating instructions.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
ANTENNA  
LEAD IN WIRE  
3. Overloading  
Do not overload wall outlets, extension cords, or  
integral convenience receptacles as this can result in a  
risk of fire or electric shock.  
GROUND CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION  
4. Power Cord Protection  
810-20)  
ELECTRIC SERVICE  
EQUIPMENT  
Power supply cords should be routed so that they are  
not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point  
where they exit from the product.  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC ART 250. PART H)  
NEC – NATIONAL ELECTRICAL CODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
EN  
USE  
SERVICING  
1. Servicing  
1. Accessories  
To avoid personal injury:  
If your product is not operating correctly or exhibits  
a marked change in performance and you are  
unable to restore normal operation by following the  
detailed procedure in its operating instructions, do  
not attempt to service it yourself as opening or  
removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to  
qualified service personnel.  
Do not place this product on an unstable cart,  
stand, tripod, bracket or table. It may fall, causing  
serious injury to a child or adult, and serious  
damage to the product.  
Use only with a cart, stand, tripod, bracket, or  
table recommended by the manufacturer or sold  
with the product.  
Use a mounting accessory recommended by the  
manufacturer and follow the manufacturer’s  
instructions for any mounting of the product.  
Do not try to roll a cart with small casters across  
thresholds or deep-pile carpets.  
2. Damage Requiring Service  
Unplug this product from the wall outlet and refer  
servicing to qualified service personnel under the  
following conditions:  
a. When the power supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen  
into the product.  
2. Product and Cart Combination  
A product and cart combination should be moved  
with care. Quick stops, excessive force, and uneven  
surfaces may cause the product and cart combina-  
tion to overturn.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions as an improper adjustment of other  
controls may result in damage and will often  
require extensive work by a qualified technician  
to restore the product to its normal operation.  
e. If the product has been dropped or damaged in  
any way.  
3. Water and Moisture  
Do not use this product  
near water—for example,  
near a bath tub, wash  
bowl, kitchen sink or  
laundry tub, in a wet  
basement, or near a  
swimming pool and the  
like.  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
f. When the product exhibits a distinct change in  
performance—this indicates a need for service.  
3. Replacement Parts  
4. Object and Liquid Entry  
When replacement parts are required, be sure the  
service technician has used replacement parts  
specified by the manufacturer or have the same  
characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or  
other hazards.  
Never push objects of any kind into this product  
through openings as they may touch dangerous  
voltage points or short-out parts that could result in  
a fire or electric shock. Never spill liquid of any  
kind on the product.  
5. Attachments  
4. Safety Check  
Do not use attachments not recommended by the  
manufacturer of this product as they may cause  
hazards.  
Upon completion of any service or repairs to this  
product, ask the service technician to perform safety  
checks to determine that the product is in safe  
operating condition.  
6. Cleaning  
Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
7. Heat  
The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce  
heat.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK OPERATION GUIDE  
EN  
5
INSERTING A VIDEO  
CASSETTE  
SUPPLY POWER  
Hook on.  
1
EJECT  
Push in.  
2
1
BATT. RELEASE  
3
PUSH  
2
Using the battery pack  
1 Hook-on the battery pack’s top end to the  
camcorder. (Charging procedure, pg. 8)  
2 Push in the battery pack until it locks into  
place.  
1 Slide EJECT to open the cassette holder.  
2 Insert a video cassette.  
3 Press PUSH to close the cassette holder.  
(For more details, pg. 13)  
To remove the battery pack  
Slide BATT. RELEASE and pull out the battery  
pack.  
SHOOTING  
PLAYBACK  
PLAY/PAUSE  
3
1
LENS COVER  
Open/Close  
Switch  
2
Set to “CAMERA”  
3
1
2
Recording Start/Stop Button  
STOP  
Set to “PLAY” REW  
1 Set the Power Switch to “PLAY”.  
2 Press REW.  
1 Slide the LENS COVER Open/Close Switch  
to open the lens cover.  
— The tape will automatically stop at the  
beginning of the tape.  
2 Set the Power Switch to “CAMERA”.  
— The power indicator will light and an  
image will appear.  
3 Press the Recording Start/Stop Button.  
— Recording starts.  
3 Press PLAY/PAUSE.  
— Playback starts and the playback picture  
appears.  
To stop playback, press STOP.  
(For more details, pg. 36.)  
To stop recording temporarily, momentarily  
press the Recording Start/Stop Button once  
again.  
Or simply play back the tape on a VHS  
VCR using the Cassette Adapter (VHS  
Playpak). pg. 34  
(For more details, pgs. 16, 17)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAJOR FEATURES  
6
EN  
REMEMBER  
Integrated Auto Light  
(GR-AX77 only) (pg. 21)  
The Logical Choice  
5Sec.-Rec (5 sec. Recording)  
(pg. 19)  
The only compact video  
cassettes that can be  
22x Optical Hyper Zoom  
(pg. 18)  
used with your VHS VCR*  
Zoom-in  
Program AE with Special  
Effects (pg. 22)  
Zoom-out  
Auto Mode Lock  
Auto Mode Release  
Electronic Fog Filter ND Effect  
Sepia Twilight Sports  
1/1000 sec. High Speed Shutter  
1/2000 sec. High Speed Shutter  
Program Manager II  
(pg. 22 – 33)  
Program AE with Special Effects,  
Fader, Wide, Super LoLux, Instant  
Title, Menu Adjustment (Focus,  
Exposure Control and so on.)  
PROVIDED ACCESSORIES  
•AA(R6) Size Battery  
•Battery Pack  
•Cassette Adapter  
AC Power Adapter/  
for Cassette Adapter  
BN-V11U for  
(VHS Playpak) C-P7U  
x 1 (GR-AX77 only)  
GR-AX47  
Charger AA-V15U  
BN-V18U for  
GR-AX77  
•Lithium Battery CR2025  
x 1 for clock operation  
•Shoulder Strap  
•DC Cord  
Cassettes marked  
can be used with this camcorder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
EN  
7
GETTING STARTED  
8
Power ..................................................................................... 8  
Clock (Lithium) Battery Insertion/Removal........................................ 10  
Date/Time Setting .................................................................... 11  
Recording Mode Setting .............................................................. 12  
Tape Length Setting ................................................................... 12  
Loading/Unloading A Cassette ...................................................... 13  
Grip Adjustment ....................................................................... 14  
Viewfinder Adjustment ............................................................... 14  
Shoulder Strap Attachment........................................................... 15  
Tripod Mounting ....................................................................... 15  
RECORDING  
16  
Basic Recording ........................................................................ 16  
Basic Features ......................................................................... 18  
Advanced Features .................................................................... 22  
PLAYBACK  
34  
Using The Cassette Adapter.......................................................... 34  
Basic Connections...................................................................... 35  
Basic Playback ......................................................................... 36  
Features ................................................................................ 37  
TAPE DUBBING  
39  
40  
41  
43  
USER MAINTENANCE  
TROUBLESHOOTING  
INDEX  
Viewfinder Indications ................................................................ 43  
Controls................................................................................. 44  
Connectors.............................................................................. 44  
Indicators ............................................................................... 44  
Other Parts............................................................................. 44  
Terms .................................................................................... 46  
CAUTIONS  
47  
49  
49  
50  
52  
53  
SPECIFICATIONS  
OPTIONAL ACCESSORIES  
ESPAÑOL  
FOR SERVICING (Only in U.S.A.)  
WARRANTY (Only in U.S.A.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
8
EN  
Marks  
Power  
To AC outlet  
This camcorder’s 3-way power supply system lets you  
choose the most appropriate source of power.  
CHG. (charge)  
indicator  
NOTES:  
No function is available without power supply.  
Use only specified power supply.  
Do not use provided power supply units with other  
equipment.  
CHARGING THE BATTERY PACK  
REFRESH switch  
SUPPLY POWER  
Connect the charger’s AC power cord to a wall outlet.  
REFRESH indicator  
REFRESH  
The AC power adapter features a REFRESH  
function that allows you to fully discharge  
the battery pack before recharging. Perform  
the REFRESH function after no less than 5  
chargings.  
1
ATTACH BATTERY PACK  
Align the marks and slide the battery pack in the  
direction of the arrow until it locks in place.  
2
The CHG. indicator begins blinking to indicate  
charging has started.  
DETACH BATTERY PACK  
To discharge the battery . . .  
When the CHG. indicator stops blinking but stays lit,  
..... attach the battery pack to the adapter  
as shown in the above illustration.  
Then push REFRESH. The REFRESH  
indicator lights when discharging  
starts, and goes out when discharging  
is complete.  
charging is finished. Slide the battery pack opposite the  
direction of the arrow.  
3
BATT. PACK  
CHARGE  
DISCHARGE  
approx.  
3 hrs. 30 min.  
approx.  
3 hrs. 30 min.  
approx.  
5 hrs. 30 min.  
BN-V11U approx. 1 hr. 10 min.  
BN-V12U approx. 1 hr. 10 min.  
BN-V18U approx. 1 hr. 40 min.  
BN-V22U approx. 2 hrs. 10 min. approx. 7 hrs.  
BN-V25U approx. 2 hrs. 40 min. approx. 10 hrs.  
USING THE BATTERY PACK  
Hook on.  
1
ATTACH BATTERY PACK  
Hook its top end to the camcorder and push the battery  
pack in until it locks in place.  
1
DETACH BATTERY PACK  
Slide BATT. RELEASE and pull out the battery pack.  
2
Push in.  
2
Approximate recording time (unit: min.)  
BATT. RELEASE  
BATT. PACK  
BN-V11U  
BN-V12U  
BN-V18U  
BN-V22U  
BN-V25U  
GR-AX77  
GR-AX47  
75  
75 (40)  
110 (70)  
150 (95)  
200 (120)  
75  
ATTENTION:  
Before detaching the power source,  
make sure that the camcorder’s power  
is turned off. Failure to do so can  
result in a camcorder malfunction.  
150  
200  
(
) : when the video light is on. (GR-AX77 only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
9
CHARGE MARKER  
(OPTIONAL BATTERY ONLY)  
Charge marker  
A charge marker is provided on the battery pack to  
help you remember whether it has been charged or  
not. Two colors are provided (red and black) — you  
choose which one means charged and which  
means discharged.  
•The battery pack BN-V18U does not have a  
charge marker.  
NOTES:  
The recording time per charge is affected by such factors as the time spent in Record-Standby mode and  
the frequency of zooming. It is safer to have spare battery packs.  
Charging times noted on page 8 are for fully discharged battery pack, and discharging times are for fully  
charged battery pack.  
Charging and discharging times vary according to the ambient temperature and the status of the battery pack.  
Remember to set the charge marker after charging a battery pack or after detaching a discharged one from  
your camcorder.  
Perform the REFRESH function after no less than 5 chargings.  
While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to  
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger  
does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/  
Charger to store it.  
High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t  
allow it to discharge in container, such as a bag.  
If you stop recharging or discharging part way through, make sure to remove the battery pack before  
unplugging the adapter’s AC cord.  
Remove the battery pack from the adapter immediately after discharging.  
To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.  
Make sure you unplug the DC cord before charging or discharging the battery pack.  
The CHG. indicator may not light properly with a brand new battery pack, or with one thats been stored  
for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.  
indicator should blink during recharging. If not, contact your nearest JVC dealer.  
USING A CAR BATTERY  
Use the optional Car Battery Cord or Car Battery  
Charger/Adapter (connect as shown in the  
illustration to the left).  
To AC outlet  
DC OUT  
terminal  
To DC  
IN jack  
NOTES:  
AC Power Adapter/  
Charger AA-V15U  
When using the car battery, leave the engine  
idling.  
The optional Car Battery Charger (BH-V3U) can  
also be used to charge the battery pack.  
When using the optional Car Battery Charger or  
Car Battery Cord (AP-V7U), refer to the respective  
instruction booklet.  
DC cord  
To car’s  
cigarette  
lighter socket  
Car Battery Cord  
AP-V7U (optional)  
USING AC POWER  
Use the AC Power Adapter (connect as shown in  
the illustration to the left).  
NOTE:  
The supplied AC Power Adapter/Charger features  
automatic voltage selection in the AC range from  
110 V to 240 V.  
Car Battery  
Charger/Adapter  
BH-V3U (optional)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
10  
EN  
Clock (Lithium) Battery Insertion/Removal  
A
This battery is necessary for clock operation and to  
perform date/time settings.  
SWITCH OFF POWER  
Switch off the unit’s power and remove the power  
1
2
3
supply unit.  
OPEN COVER  
Open the clock battery compartment cover while  
pressing the release tab.  
REMOVE BATTERY (when replacing)  
Insert a pointed, non-metallic object between the  
A
battery and the compartment ( ) and pull the  
battery out.  
INSERT BATTERY  
Ensure that the plus (+) side is up and insert a  
CR2025 lithium battery and push it in.  
4
5
CLOSE COVER  
Close the compartment cover until it clicks in place.  
NOTE:  
See “SAFETY PRECAUTIONS” (pg. 2) for information  
on safe handling of lithium batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
11  
Date/Time Setting  
ACCESS MENU SCREEN  
First set the Power Switch to “CAMERA”. Turn the  
Select Dial to any position except AUTO LOCK,  
then press the MENU Jog Dial.  
1
2
SELECT FUNCTION  
Rotate the MENU Jog Dial to move the highlight bar  
to “DATE/TIME”, then press it. The DATE/TIME  
Setting Menu appears.  
Select Dial  
•If you decide you want to return the date and time  
to the previous settings, rotate the MENU Jog Dial  
to move highlight bar to “EXIT” and press it, then  
go to step 6.  
MENU  
Jog Dial  
•If you want to set only the time without changing  
the date, go to step 4.  
Viewfinder  
MENU  
SET DATE  
Rotate the MENU Jog Dial to move the highlight bar  
to the item you want to set and then press it. When  
the setting begins blinking, rotate the MENU Jog  
Dial until the correct setting appears and then press  
it. The setting stops blinking.  
4
MENU END  
3
4
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
JAN 1.98  
TELE MACRO OFF  
TAPE LENGTH T30  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
•Repeat this procedure until you’re satisfied with  
the Date settings (“YEAR”, “MONTH” and “DAY”).  
4NEXT  
Menu Screen  
SET TIME  
Rotate the MENU Jog Dial to move the highlight bar  
to “TIME” and then press it. When the hour setting  
begins blinking, rotate the MENU Jog Dial until the  
correct setting appears and then press it. When the  
hour setting stops blinking and the minute setting  
begins blinking, rotate the MENU Jog Dial until the  
correct setting appears and then press it. The minute  
setting stops blinking.  
DATE TIME  
YEAR  
1998  
JAN  
MONTH  
DAY  
1
TIME  
PM 12:00  
12-hour  
indication with  
AM or PM  
EXIT  
DATE/TIME Setting Menu  
START CLOCK OPERATION  
When none of these settings (YEAR, MONTH, DAY,  
TIME) blinks, rotate the MENU Jog Dial to move the  
highlight bar to “EXIT”, and press it. The Menu  
Screen appears and “MENU END” is highlighted.  
5
6
MENU  
4
MENU END  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
CLOSE MENU  
DEC 25.98  
TELE MACRO OFF  
TAPE LENGTH T30  
Press the MENU Jog Dial.  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
4NEXT  
NOTE:  
To display the date and time in the viewfinder and on a  
connected TV, see “Date/Time Insert” (pg. 20).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
12  
EN  
Recording Mode Setting  
SP/EP Recording  
Mode Button  
Set depending on your preference.  
SET RECORDING MODE  
First set the Power Switch to “CAMERA”. Press SP/EP  
1
Button for more than 1 second. “SP” (Standard Play)  
provides higher picture and sound quality and is  
better for dubbing, while “EP” (Extended Play) is  
more economical, providing three times as the  
recording time.  
NOTE:  
If the recording mode is switched during recording, the  
playback picture will be blurred at the switching point.  
Select Dial  
MENU Jog Dial  
Viewfinder  
Tape Length Setting  
T40  
Tape length  
indicator  
SP  
Set the tape length according to the length of the tape  
used.  
Recording  
mode  
indicator  
ACCESS MENU SCREEN  
First set the Power Switch to “CAMERA”. Turn the  
1
2
3
Select Dial to any position except AUTO LOCK,  
then press the MENU Jog Dial.  
SELECT FUNCTION  
MENU  
Rotate the MENU Jog Dial to move the highlight bar  
to “TAPE LENGTH”, then press it. The TAPE  
LENGTH Setting Menu appears.  
4
MENU END  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
DEC 25.98  
TELE MACRO OFF  
TAPE LENGTH T40  
SET TAPE LENGTH  
M. W. B.  
AUTO  
Rotate the MENU Jog Dial to move the highlight bar  
to the correct setting. T20=20 minutes of recording  
time, T30=30 minutes, and T40=40 minutes (in SP).  
ZOOM SPEED FAST  
4NEXT  
Menu Screen  
•If you decide you want to return the tape length to  
the previous setting, rotate the MENU Jog Dial to  
move the highlight bar to “EXIT”.  
TAPE LENGTH  
T20  
T30  
T40  
CLOSE MENU  
Press the MENU Jog Dial. The Menu Screen  
reappears and the highlight bar is on “MENU END”.  
Then press the MENU Jog Dial again to close the  
Menu Screen.  
4
EXIT  
TAPE LENGTH Setting Menu  
NOTES:  
The displayed tape remaining time (pg. 17) is  
correct only if the correct tape length has been  
selected.  
Once you have set the tape length, it remains un-  
changed even if the Select Dial is returned to AUTO  
LOCK.  
MENU  
4
MENU END  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
TELE MACRO OFF  
TAPE LENGTH T20  
AUTO  
DEC 25.98  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
4NEXT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
13  
Loading/Unloading A Cassette  
OPEN CASSETTE HOLDER  
Slide EJECT until the holder opens. Do not use force  
1
2
3
to open.  
1
INSERT/REMOVE CASSETTE  
Make sure the label is facing outward.  
3
2
CLOSE CASSETTE HOLDER  
Press PUSH and make sure the holder is closed and  
locked.  
NOTES:  
A cassette holder can’t be opened unless a power  
supply is attached.  
Make sure that the tape is not slack when loading the  
cassette. If there is any slack, turn the gear on the  
cassette in the direction of the arrow to take up the  
slack.  
Turn to take  
up slack.  
Erase Protection  
Gear  
Make sure the Erase Protection tab is in the position  
that allows recording. If not, slide the tab. Some  
cassettes have removable tabs. If the tab has been  
removed, cover the hole with adhesive tape.  
The cassette holder can’t be opened while the  
camcorder is in the record mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
Grip Adjustment  
14  
EN  
Power Zoom Button  
EXPAND LOOP  
Separate the Velcro strip.  
1
2
3
INSERT HAND  
Pass your right hand through the loop and grasp the  
grip.  
ADJUST STRAP LENGTH  
Adjust so your thumb and fingers can easily operate  
the Recording Start/Stop Button and Power Zoom  
Button. Refasten the Velcro strip.  
Recording Start/Stop Button  
Viewfinder Adjustment  
POSITION VIEWFINDER  
3
Adjust the viewfinder manually for best viewability  
1
2
3
(see illustration at left).  
SELECT MODE  
1
Set the Power Switch to CAMERA.  
2
ADJUST DIOPTER  
Turn the Diopter Adjustment Control until the  
indications in the viewfinder are clearly focused.  
Set POWER to “CAMERA”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
15  
Shoulder Strap Attachment  
ATTACH STRAP  
Following the illustration at left, thread the strap  
through the top of the eyelet 1, then fold it back  
and thread it through the buckle 2. Repeat the  
procedure to attach the other end of the strap to the  
other eyelet 3, making sure the strap isn’t twisted.  
1
2
2
1
1
3
ADJUST LENGTH  
Adjust as shown in the illustration at left 1.  
Tripod Mounting  
ALIGN AND TIGHTEN  
Align the screw and camera direction stud on the  
tripod with the camera’s mounting socket and stud  
hole. Then tighten the screw.  
1
CAUTION:  
When using a tripod, be sure to open and extend  
its legs fully to stabilize the camcorder. To  
prevent damage to the unit caused by falling  
over, do not use a small-sized tripod.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording  
16  
EN  
NOTE:  
LENS COVER Switch  
You should already have performed the procedures listed  
below. If not, do so before continuing.  
Power (pg. 8)  
Recording Mode/Tape Length Setting (pg. 12)  
Grip Adjustment (pg. 14)  
LOAD A CASSETTE  
Power  
indicator  
Slide EJECT to open the cassette holder, then insert  
1
2
the cassette with the label facing out. Press PUSH to  
ensure the holder is closed and locked.  
ENTER RECORD-STANDBY MODE  
Slide the LENS COVER Open/Close Switch to open  
the lens cover, then set the Power Switch to  
CAMERA.  
Power Switch  
Start/Stop Button  
•The power indicator lights and the camcorder  
enters the Record-Standby mode.  
•The scene you’re aimed at appears on the  
viewfinder screen, with the word “PAUSE”  
superimposed upon it.  
START SHOOTING  
Press the Recording Start/Stop Button.  
3
•“REC ” appears in the viewfinder while recording is  
in progress.  
Tally lamp (GR-AX77 only)  
(lights while recording is in progress)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
17  
Tape remaining time indicator  
STOP RECORDING  
25MIN  
MIN  
Press the Recording Start/Stop Button again to stop  
recording.  
(Now calculating)  
4
•The camcorder re-enters the Record-Standby  
mode.  
120MIN  
119MIN  
NOTES:  
A cassette holder can’t be opened unless a power supply  
is attached.  
There may be a delay after you slide EJECT until the  
holder opens. Do not use force.  
The displayed remaining time is approximate.  
The time required to calculate the remaining tape  
length, and the accuracy of the calculation, may vary  
according to the type of tape used.  
3MIN  
2MIN  
(Blinking)  
1MIN  
The tape remaining time indicator is correct only if the  
correct tape length has been selected (pg. 12).  
“TAPE END” appears when the tape reaches its end,  
and the power goes off automatically if left in this  
condition for 5 minutes. “TAPE END” also appears  
when a cassette whose tape is already at its end is  
loaded.  
(Blinking)  
0MIN  
(Blinking)  
Start/Stop Button  
If the Record-Standby mode continues for 5 minutes  
without performing Zoom or any other operations, the  
camcorder’s power shuts off automatically. Set the  
Power Switch to “POWER OFF”, and then back to  
“CAMERA” to turn the camcorder on again.  
If the Recording Start/Stop Button is pressed after the  
Record-Standby mode has continued for over  
5 minutes, recording may not start immediately.  
If you’re recording on a cassette from the middle (such  
as when a tape is removed and re-inserted during  
recording), use the Retake function (pg. 19) to find  
the end of the last recording so you don’t erase any of  
it.  
The LENS COVER warning blinks for about 5 seconds  
when the camcorder is turned on when the cover is  
closed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Features  
18  
EN  
FEATURE:  
Zooming  
Zoom-in  
PURPOSE:  
To produce the zoom in/out effect, or  
an instantaneous change in image  
magnification.  
OPERATION:  
Zoom In  
Press the “T” of the Power Zoom  
Button.  
Zoom-out  
Zoom Out  
Press “W” of the Power Zoom  
Button.  
Zoom indicator bar  
Zooming speed is available. A total  
of 4 zoom speeds are available. 2  
speeds can be selected depending  
on how hard the Power Zoom  
Button is pressed (press the button  
fully for regular-speed, press it  
lightly for slow-speed), while 2  
speed levels (FAST/SLOW) can be  
selected in the ZOOM SPEED  
Menu depending on the overall  
speed you prefer.  
Power Zoom button  
The combinations of zoom speeds  
are shown in the chart below.  
Changing the ZOOM SPEED in the  
Menu  
1) Set the Select Dial to any position  
except AUTO LOCK and press the  
MENU Jog Dial. The Menu Screen  
appears.  
2) Rotate the MENU Jog Dial to move  
the highlight bar to “ZOOM  
SPEED”, then press it. The ZOOM  
SPEED Setting Menu appears.  
3) Rotate the MENU Jog Dial to move  
the highlight bar to the desired  
speed and press it twice. The  
Menu Screen disappears and  
setting is completed.  
Select Dial  
MENU Jog Dial  
Viewfinder  
MENU  
4
MENU END  
FOCUS  
AUTO  
AUTO  
JAN 1.98  
EXPOSURE  
DATE TIME  
TELE MACRO OFF  
TAPE LENGTH T30  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
4NEXT  
Menu Screen  
NOTE:  
Focusing may become unstable  
during Zooming. In this case, set the  
zoom while in Record–Standby, lock  
the focus by using the manual focus  
(pg. 29), then zoom in or out in  
Record mode.  
ZOOM SPEED  
FAST  
SLOW  
EXIT  
Zooming Speed ( 1– 4 in order of speed)  
ZOOM SPEED Setting Menu  
“ZOOM SPEED”  
in the Menu  
Screen  
Pressing the Power Zoom Button  
fully  
lightly  
3
FAST  
1 (fastest)  
2
SLOW  
4 (slowest)  
: when the Select Dial is set to AUTO LOCK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
19  
FEATURE:  
PURPOSE:  
Quick Review  
To check the end of the last  
recording.  
OPERATION:  
1) Press “ ” and release quickly  
during the Record-Standby mode.  
Tape is rewound for about 2  
seconds and played back  
automatically, then pauses in  
Record-Standby mode for the  
next shot.  
5SEC. REC  
RETAKE (R/F)  
NOTE:  
Distortion may occur at start of  
playback. This is normal.  
FEATURE:  
Retake  
PURPOSE:  
OPERATION:  
To re-record certain segments.  
1) Make sure the camcorder is in the  
Record-Standby mode.  
2) Press either RETAKE button to  
reach the start point for new  
recording. Pressing “F” forwards  
the tape and pressing “R” reverses  
it.  
3) Press Recording Start/Stop Button  
to start recording.  
NOTE:  
Noise may appear during Retake.  
This is normal.  
Viewfinder  
FEATURE:  
PURPOSE:  
5Sec. Rec (5-sec. Recording)  
To record a scene for 5 seconds,  
providing quick scene transitions like  
those seen in TV programmes.  
PAUSE  
5S  
OPERATION:  
1) During Record-Standby, press  
5SEC. REC. “  
5S” appears and  
5Sec. Rec is reserved.  
2) Press Recording Start/Stop Button.  
Recording starts, and after  
5Sec. Rec mode indicator  
5-second recording is finished, the  
camcorder reenters the Record-  
Standby mode automatically.  
To cancel the 5Sec. Rec.  
function, press 5SEC. REC again  
so that “  
5S” disappears.  
NOTE:  
The Fader (pg. 24) cannot be  
activated by pressing 5SEC. REC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Features (cont.)  
20  
EN  
DATE/TIME  
FEATURE:  
PURPOSE:  
Date/Time Insert  
To display the date and time in the  
viewfinder or on a connected color  
monitor, as well as to record them  
manually or automatically.  
OPERATION:  
1) Turn the Select Dial to any  
position except AUTO LOCK.  
2) Choose a display mode by  
pressing DATE/TIME repeatedly  
while in Record-Standby to cycle  
through the modes as shown in the  
illustration at left.  
Display  
Select Dial  
You should have already  
performed the Date/Time Setting  
procedure (pg. 11). If you  
haven’t, do so first.  
NOTES:  
DISPLAY  
The selected display can be  
recorded.  
Date display  
If you don’t want to record the  
display, select the Date-off mode  
before shooting.  
Time display  
If you want to delete the display  
during shooting, press DATE/TIME.  
To recall the display, engage the  
Record-Standby mode and press  
DATE/TIME repeatedly until the  
desired display appears.  
Date/Time display  
Auto Date Record mode  
Date-off mode (No display)  
AUTO DATE RECORD  
Your camcorder automatically  
records the date for about 5  
seconds after recording is initiated  
in the following situations:  
After changing the date.  
Date display  
Auto Date Record mode  
After loading a cassette.  
DEC 25.98  
AUTO DATE  
After Auto Date Record mode is  
selected by pressing DATE/TIME.  
In this mode, the date is replaced  
after 5 seconds with “AUTO DATE”  
but this is not recorded.  
Auto date record mode  
Time display  
Setting the Select Dial to AUTO  
LOCK always engages the Auto  
Date Record mode, and disables  
all other modes.  
DEC 25.98  
PM10:50:00  
Auto date record  
executed  
Date/Time display  
DEC 25.98 PM10:50:00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
21  
FEATURE:  
PURPOSE:  
Video Light (GR-AX77 only)  
To brighten the scene when natural  
lighting is too dim.  
OPERATION:  
1) Set the LIGHT OFF/AUTO/ON  
Switch as required:  
ON  
: Always keeps the light on  
as long as the camcorder  
is turned on.  
AUTO : Automatically turns on  
the light when the  
camcorder senses  
insufficient lighting on the  
subject.  
OFF : Turns off the light.  
LIGHT OFF/AUTO/ON  
The video light can only be used  
with the camcorder’s power on.  
It is recommended to set the  
white balance (pg. 31) to  
HALOGEN mode ( ) when you  
use the video light.  
When not using the video light,  
turn it off to save battery power.  
NOTES:  
Even if the battery indicator (  
)
does not blink if the battery pack’s  
charge is low, the camcorder may  
turn off automatically when you  
turn on the video light, or when  
you start recording with the video  
light turned on.  
DANGER  
The video light can become extremely  
hot. Do not touch it either while in  
operation or soon after turning it off,  
otherwise serious injury may result.  
Do not place the camcorder into the  
carrying case immediately after using  
the video light, since it remains  
extremely hot for some time.  
When operating, keep a distance of  
about 30 cm. (1 ft.) between the video  
light and people or objects.  
Do not use near flammable or explosive  
materials.  
When the LIGHT OFF/AUTO/ON  
Switch is set to “AUTO”:  
Depending on the lighting  
conditions, the video light may  
keep turning on and off. In this  
case, manually switch the light  
on or off using the LIGHT OFF/  
AUTO/ON switch.  
While the Sports or High-Speed  
Shutter mode (pg. 23) is  
engaged, the light is likely to stay  
on.  
It is recommended that you consult your  
nearest JVC dealer for replacing the  
video light.  
While the Twilight mode  
(pg. 23) is engaged, the light  
will not activate.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features  
22  
EN  
1 second later, the mode is activated.  
Program AE With Special Effects  
After 1 sec.  
All you have to do to access any of the variety of  
shooting effects is to turn the Select Dial.  
SEPIA  
SELECT MODE  
Turn the Select Dial until the symbol of the function  
1
you want is aligned with the mark.  
The selected mode’s name and its indication are  
displayed for approx. 1 second. Then the name  
disappears, and only the indication remains. The  
mode is activated.  
Viewfinder  
•When Auto Mode Lock or Auto Mode Release  
mode is selected, only the mode’s name is  
displayed. Then the name disappears and the  
mode is activated.  
NOTES:  
Only one effect can be engaged at a time.  
The screen becomes slightly reddish when the Fader  
(pg. 24) is used in the Sepia mode.  
The screen becomes slightly dark in the High Speed  
Shutter mode. Use in well-lit situations.  
In the High Speed Shutter or Sports modes, picture  
color may be adversely affected if subject is lit by  
alternating discharge-type light sources such as  
flourescent or mercury-vapor lights.  
Mark  
C
U
EFFECT  
WIDE  
TITLE  
SUPER  
LOLUX  
Select Dial  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
23  
Dial  
symbol  
Viewfinder  
indication  
Dial  
symbol  
Viewfinder  
indication  
Mode  
Mode  
LOCK  
AUTO LOCK  
Auto Mode Lock  
TWILIGHT  
Twilight  
Auto Mode Lock  
Twilight  
Locks the camcorder in Full Auto mode, preventing  
incorrect operation due to accidental button  
pressing during shooting.  
Dusk, twilight scenery, fireworks, etc., look more  
natural and dramatic. The following happens when  
Twilight mode is selected:  
In this mode the following controls are disabled;  
DATE/TIME display select, and the Menu Jog Dial.  
•Auto gain control is turned off.  
•White Balance is set to “ ” (FINE day mode), but  
can also be manually changed to another mode  
(pg. 31).  
RELEASE AUTO RELEASE Auto Mode Release  
•Auto Focus becomes available only in the range of  
10 m (33 ft.) to infinity. To focus when the subject-  
to-camera distance is less than 10 m (33 ft.), use  
manual focusing (pg. 29).  
Auto Mode Release  
Re-enables the controls that were disabled by Auto  
Mode Lock.  
SPORTS  
Sports  
Electronic  
FG  
FG : FOG  
Fog Filter  
Sports  
Electronic Fog Filter  
High shutter speed clearly captures fast-moving  
action.  
Makes the picture look misty white, as when an  
external fog filter is attached to the lens. Softens the  
image and gives it a “fantasy” look.  
1/1000 sec.  
1/1000  
1S 1/1000  
High Speed Shutter  
ND  
ND:ND EFFECT  
ND Effect  
1/2000 sec.  
1/2000  
2S 1/2000  
High Speed Shutter  
ND Effect  
A black mist darkens the picture, as when an ND  
filter is used. Helps to counter the effects of glare on  
the subject.  
High-Speed Shutter (1/1000s., 1/2000s.)  
Captures faster action than Sports mode.  
SEPIA  
Sepia  
Sepia  
The scene being shot is recorded in sepia-tinted  
(reddish-brown) monochrome, giving the effect of  
an older movie. Use together with Wide (pg. 24)  
for the authentic look of a classic Hollywood  
movie.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
24  
EN  
Fade-in  
Fader  
This feature allows smooth fade-in and fade-out to black  
blank screen. Fade-in works at recording start, and fade-  
out works at recording end or when you enter Record-  
Standby mode.  
ENGAGE FADE-STANDBY MODE  
Press EFFECT to engage the Fade-Standby mode.  
1
Fade-out  
Viewfinder  
4EFFECT  
B
K
•“  
FADER” is displayed for approx. 2 seconds.  
After 2 sec.  
FADER  
BK  
Then “FADER” disappears, and only “ ” remains.  
START OR END RECORDING  
Press Recording Start/Stop Button to activate fade-in  
or fade-out.  
2
3
TO CANCEL FADE-STANDBY  
MODE  
BK  
While “ ” is displayed, press EFFECT.  
•“OFF” is displayed for approx. 2 seconds and the  
fade-standby mode is canceled.  
NOTES:  
Pressing and holding the Recording Start/Stop Button  
allows you to record a black blank screen.  
The screen becomes slightly reddish when the Fader is  
used with Sepia (pg. 23).  
With the Electronic fog filter mode (pg. 23)  
engaged, the image fades in/out to a white screen.  
EFFECT  
WIDE  
Recording  
Start/Stop  
Button  
Wide  
This feature allows you to record black bars at the top  
and bottom of the screen to produce a cinema-like  
“wide-screen” effect.  
Viewfinder  
ENGAGE WIDE MODE  
Press WIDE.  
1
To restore normal screen, press WIDE again.  
Wide mode  
NOTE (for Fader, Wide, Super LoLux, and Instant Titles) :  
When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings  
(Fade-standby : “OFF”, Wide mode : off, Super LoLux : “MAX”, Instant Title : off). Then when the Select  
Dial is returned to any position except AUTO LOCK, the above functions return to the settings you  
selected before turning it to AUTO LOCK. However, if the function is switched during AUTO LOCK, the  
selected mode will be set and will remain unchanged even when the Select Dial is turned to any  
position except AUTO LOCK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
25  
Viewfinder  
Super LoLux(Gain Up)  
4S.LX  
Bright, natural recordings can be taken even in areas with  
low or poor lighting.  
After 2 sec.  
MAX  
SELECT SUPER LOLUX MODE  
Press SUPER LOLUX repeatedly to cycle through the  
modes as shown at left. Once the desired mode  
appears, it is engaged.  
1
MAX  
NORM  
OFF  
•The mode’s name is displayed for approx. 2  
seconds, then disappears.  
MAX : To record a subject in a dark lit  
environment. When it is more convenient  
to shoot the subject with a brighter image  
even if the picture becomes slightly  
coarse.  
NORM : To record a subject in a dimly lit  
environment. When it is more convenient  
to shoot with a less coarse picture  
although the subject becomes slightly  
dark. This setting is suitable for measuring  
sensitivity conforming to EIA-639 (EIA*  
Standard for Low Light Sensitivity  
Measurement).  
*EIA : Electronic Industries Association  
: Allows you to shoot dark scenes with no  
picture brightness adjustment.  
TITLE  
SUPER LOLUX  
OFF  
Viewfinder  
Instant Titles  
The camcorder has eight preset titles in memory. You can  
superimpose one of them above a previously stored title  
as shown in the illustration to the left.  
Instant Titles can be displayed not only in English but also  
in French, Spanish and Portuguese. Change the setting in  
Title display  
TITLE LANG. in the Menu screen. (  
pg. 26, 27).  
HAPPY BIRTHDAY  
OUR VACATION  
No display  
SELECT PRESET TITLE  
Press TITLE repeatedly to cycle through the preset  
1
titles until the desired title is displayed.  
MERRY CHRISTMAS  
A SPECIAL DAY  
HAPPY HOLIDAYS  
OUR NEW BABY  
WEDDING DAY  
CONGRATULATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
26  
EN  
Using Menu For Detailed Adjustment  
This camcorder is equipped with an easy-to-use,  
on-screen menu system that simplifies many of the more  
detailed camcorder settings.  
ACCESS MENU SCREEN  
Turn the Select Dial to any position except AUTO  
LOCK, then press the MENU Jog Dial. The Menu  
Screen appears.  
1
2
Select Dial  
MENU Jog Dial  
SELECT FUNCTION  
Viewfinder  
Rotate the MENU Jog Dial to place the highlight bar  
on the desired function.  
MENU  
4
MENU END  
FOCUS  
AUTO  
•When the highlight bar reaches the bottom of  
Menu Screen 1, Menu Screen 2 is automatically  
displayed. When the highlight bar reaches the top  
of Menu Screen 2, Menu Screen 1 is automatically  
displayed.  
EXPOSURE  
DATE TIME  
TELE MACRO  
AUTO  
DEC 25.98  
OFF  
TAPE LENGTH T30  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
4NEXT  
•If the setting you want can’t be found in the Menu  
Screen, place the highlight bar on “MENU END”,  
then go to step 5.  
Menu Screen 1  
MAKE SETTING  
4
BACK  
REC TIME  
INT. TIME  
OFF  
OFF  
Press the MENU Jog Dial. The setting menu of the  
selected function appears. The setting procedure  
depends on the function you select.  
3
GR-AX77 only  
TALLY LAMP ON  
TITLE LANG.  
JLIP ID NO.  
ENGLISH  
07  
If you select “FOCUS”, “EXPOSURE”, or  
“DATE/ TIME” . . .  
DEMO MODE OFF  
... see respective pages (FOCUS: pg. 28, 29,  
EXPOSURE: pg. 30, DATE/TIME: pg. 11).  
4
MENU END  
Menu Screen 2  
If you select “JLIP ID NO.” . . .  
... press the MENU Jog Dial so that the number  
blinks, then rotate it until the desired number  
appears, and press it. Then rotate the MENU Jog  
Dial to move the highlight bar to “EXIT”.  
TITLE LANG.  
ENGLISH  
FRENCH  
SPANISH  
PORTUGUESE  
If you select any other functions . . .  
... rotate the MENU Jog Dial to move the highlight  
bar to the desired setting.  
If you decide you want to return to the previous  
setting, rotate the MENU Jog Dial to move the  
highlight bar to “EXIT”.  
EXIT  
Setting Menu  
(ex. TITLE LANG.)  
END SETTING  
Press the MENU Jog Dial. The Menu Screen  
BACK  
4
4
5
reappears and the highlight bar is on “MENU END”.  
REC TIME  
OFF  
OFF  
INT. TIME  
GR-AX77 only  
TALLY LAMP ON  
CLOSE MENU  
TITLE LANG.  
JLIP ID NO.  
FRENCH  
07  
Press the MENU Jog Dial. The normal screen  
reappears.  
DEMO MODE OFF  
4MENU END  
NOTES:  
The menu function except “FOCUS” and “EXPOSURE” are not  
available while in the Record mode.  
Normal Screen  
For GR-AX47: The tally lamp is not built-in. “TALLY LED” in  
the Menu Screen is always set to “OFF” and cannot be set to  
“ON”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
27  
FOCUS  
AUTO  
MANU  
AUTO  
MANU  
Adjusts focus automatically.  
Allows you to adjust focus manually (pg. 28, 29).  
Adjusts exposure automatically.  
EXPOSURE  
Allows you to adjust exposure manually (pg. 30).  
DATE/TIME  
Allows you to set the current date and time (pg. 11).  
TELE MACRO  
Usually the distance to a subject where the lens is in focus  
OFF  
ON  
depends on the zoom magnification. Unless there is a distance  
more than 1m (3.3 ft.) to the subject, the lens is out of focus at  
the maximum telephoto setting. When set to “ON”, you can  
shoot a subject as large as possible at a distance of approx.  
60 cm (2 ft.).  
Depending on the zoom position, the lens may go out of focus.  
TAPE LENGTH  
M.W.B.  
Allows you to set the tape length depending on the tape used (pg. 12).  
This camcorder’s Automatic Color Temperature system senses  
the color temperature of the ambient lighting for automatic  
white balance adjustment. However, precise color adjustment is  
not possible under the following conditions:  
AUTO  
: FINE  
: CLOUD  
When an object is in various shades of the same color.  
: HALOGEN When a predominantly red or brown object is being shot  
outdoors.  
MWB  
In these cases, use the camcorder’s built-in preset filters for  
white balance adjustment (pg. 31).  
ZOOM SPEED  
Allows you to set the zooming speed (pg. 18).  
FAST  
SLOW  
REC TIME  
INT. TIME  
This feature allows you to set the parameters for Animation and Time-Lapse  
recording (pg. 33).  
This feature allows you to set the parameters for Self-Timer (pg. 32) and Time-  
Lapse recording (pg. 33).  
TALLY LAMP  
ON  
The tally lamp comes on to signal the start of recording.  
(available only for GR-AX77)  
OFF  
The tally lamp remains off at all times.  
(GR-AX47: always set to this mode.)  
TITLE LANG.  
JLIP ID NO.  
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)  
of Instant Titles (pg. 25).  
This number is necessary when connecting the camcorder to a device such as a  
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory  
setting is 07.  
DEMO MODE  
OFF  
ON  
Automatic demonstration will not take place.  
Demonstrates certain functions such as the Fader, Instant Titles  
etc. When “DEMO MODE” is set to “ON” and the Menu Screen  
is closed, demonstration starts.  
NOTES:  
When a tape whose Erase Protection tab is in the position that allows  
recording is loaded in the camcorder, demonstration is not available.  
By turning off the camcorder or inserting a tape whose Erase Protection  
tab is in the position that allows recording into it, “DEMO MODE” is  
set to “OFF” automatically.  
During demonstration, all functions except zoom are disabled.  
= Factory setting and when the Select Dial is set to AUTO LOCK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
28  
EN  
Focusing  
Auto Focus  
Focus detection zone  
The camcorder’s Full Range AF system offers continuous  
shooting ability from close-up to infinity. However,  
correct focus may not be obtainable in the situations  
listed below (in these cases use manual focusing):  
•When two subjects overlap in the same scene.  
•When illumination is low.*  
•When the subject has no contrast (difference in  
brightness and darkness), such as a flat, one-color wall,  
or a clear, blue sky.*  
•When a dark object is barely visible.*  
•When the scene contains minute patterns or identical  
patterns that are regularly repeated.  
•When the scene is affected by sunbeams or light  
reflecting off the surface of a body of water.  
•When shooting a scene with a high-contrast  
background.  
* The low-contrast warning “  
” appears.  
NOTES:  
If the lens is smeared or blurred, accurate focusing is  
not possible. Keep the lens clean, wiping with a piece  
of soft cloth if it gets dirty. When condensation occurs,  
wipe with a soft cloth or wait for it to dry naturally.  
When shooting a subject close to the lens, zoom-out  
first (pg. 18). If zoomed-in in the auto focus mode,  
the camcorder could automatically zoom out depend-  
ing on the distance between the camcorder and the  
subject. When Tele Macro (pg. 27) is activated, the  
camcorder will not zoom out automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
29  
Manual Focus  
NOTE:  
You should already have made the necessary viewfinder  
adjustments (pg. 14). If you haven’t, do so before  
continuing.  
ACCESS MENU SCREEN  
Turn the Select Dial to any position except AUTO  
1
2
LOCK, then press the MENU Jog Dial. The Menu  
Screen appears, and the highlight bar is placed on  
“FOCUS”.  
Select Dial  
MENU Jog Dial  
Viewfinder  
MENU  
ACCESS FOCUS MENU SCREEN  
Press the MENU Jog Dial.  
4
MENU END  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
DEC 25.98  
TELE MACRO OFF  
TAPE LENGTH T30  
ACCESS MANUAL FOCUS  
No indication  
during  
recording  
M. W. B.  
AUTO  
Rotate the MENU Jog Dial to move the highlight bar  
ZOOM SPEED FAST  
4NEXT  
3 to “MANU”, then press it. “ ” and “  
” appear. The  
focus is locked at this point.  
Menu Screen  
ADJUST FOCUS  
FOCUS  
To farther subject . . .  
4 Rotate the MENU Jog Dial upward. “  
blinks.  
AUTO  
MANU  
” appears and  
Go to step 5.  
To nearer subject . . .  
Rotate the MENU Jog Dial downward. “ ” appears  
No indication  
during  
recording  
EXIT  
and blinks.  
Focus Menu Screen  
Go to step 5.  
END ADJUSTMENT OF FOCUS  
Press the MENU Jog Dial. The Menu Screen  
reappears and the highlight bar is placed on “MENU  
END”.  
5
6
CLOSE MENU  
Press the MENU Jog Dial. The Menu Screen  
disppears and “  
is locked.  
” reappears to indicate the focus  
Manual Focus Screen  
NOTES:  
To return to Auto Focus, select “AUTO” in step 3.  
To re-adjust Manual Focus, repeat the procedure from  
step 1.  
Be sure to focus the lens in the maximum telephoto  
position when you use the Manual Focus mode. If you  
focus in on a certain subject in the wide-angle position,  
sharply focused images cannot be obtained when  
zoomed up because the depth-of-field is reduced at  
longer focal lengths.  
When the focus level cannot be adjusted any farther or  
closer, “ ” or “ ” will blink.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
30  
EN  
Exposure Control  
This feature automatically adjusts the iris for the best  
available picture quality, but you can override and make  
the adjustment manually.  
ACCESS MENU SCREEN  
Turn the Select Dial to any position except AUTO  
LOCK, then press the MENU Jog Dial. The Menu  
Screen appears.  
1
Select Dial  
MENU Jog Dial  
ACCESS EXPOSURE MENU  
SCREEN  
Viewfinder  
Rotate the MENU Jog Dial to move the highlight bar  
to “EXPOSURE” and press it.  
MENU  
2
3
4
MENU END  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
ACCESS MANUAL EXPOSURE  
DEC 25.98  
TELE MACRO OFF  
TAPE LENGTH T30  
Rotate the MENU Jog Dial to move the highlight bar  
to “MANU”, then press it. “00” (exposure control  
level counter) appears.  
No indication  
during  
recording  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
4
NEXT  
Menu Screen  
ADJUST EXPOSURE  
To brighten the image . . .  
4 Rotate the MENU Jog Dial upward. The exposure  
control level counter increases (maximum +06).  
Go to step 5.  
EXPOSURE  
AUTO  
MANU  
To darken the image . . .  
Rotate the MENU Jog Dial downward. The exposure  
control level counter decreases (maximum –06).  
Go to step 5.  
No indication  
during  
recording  
EXIT  
Exposure Menu Screen  
END ADJUSTMENT OF EXPOSURE  
Press the MENU Jog Dial. The Menu Screen  
5
6
reappears and the highlight bar is placed on “MENU  
END”.  
00  
Exposure  
control  
level  
CLOSE MENU  
Press the MENU Jog Dial. The Menu Screen  
disappears and the exposure control level counter  
reappers to indicate the exposure is adjusted.  
counter  
Manual Exposure Screen  
To brighten the image  
NOTES:  
To return to the factory setting, select “AUTO” in step 3.  
To re-adjust exposure, repeat the procedure from step  
1.  
06  
+
06  
To darken the image  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
31  
Viewfinder  
MENU  
Manual White Balance Adjustment  
(M.W.B.)  
Menu Screen  
4
MENU END  
The white balance is usually adjusted automatically.  
However, the more advanced camcorder operator would  
prefer to control this function manually and achieve a  
more professional color/tint reproduction.  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
DEC 25.98  
TELE MACRO OFF  
TAPE LENGTH T30  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
ACCESS MENU SCREEN  
4
NEXT  
Turn the Select Dial to any position except AUTO  
LOCK, then press the MENU Jog Dial. The Menu  
1
M. W. B.  
Screen appears.  
M.W.B.  
Menu Screen  
AUTO  
ACCESS WHITE BALANCE MENU  
: FINE  
: CLOUD  
: HALOGEN  
SCREEN  
MWB  
Rotate the MENU Jog Dial to move the highlight bar  
to “M.W.B.”, then press it.  
2
EXIT  
SELECT WHITE BALANCE  
Rotate the MENU Jog Dial to move the highlight bar  
to the required white balance.  
3
AUTO” ................... Automatic adjustment  
: FINE” ............. Outdoors on sunny day  
: CLOUD” ........ Outdoors on cloudy day  
: HALOGEN” ... Light source is halogen or  
tungsten lamp  
MWB” .................... When using a personal White  
Balance Setting stored in  
memory (see below.)  
CLOSE MENU  
MENU  
Jog Dial  
Press the MENU Jog Dial. The Menu Screen  
reappears. Then press the MENU Jog Dial again to  
exit the Menu Screen.  
Select Dial  
4
MWB  
MWB sets the color temperature for the subject’s light  
source so you can shoot with natural colors that are  
unaffected by surroundings, even when there are  
multiple subjects with different color temperatures.  
NOTES:  
To switch to automatic white balance  
adjustment, set the M.W.B. in the Menu  
Screen to “AUTO”, or turn the Select Dial to  
“AUTO LOCK”.  
PREPARE WHITE OBJECT  
Re-adjust the White Balance when the  
lighting has changed, when the camcorder  
has been turned off and on again, or when  
the Select Dial’s position has been changed.  
When adjusted by putting colored paper in  
front of the subject in step 1 of “MWB”, this  
unit makes its color temperature standard for  
automatic white balance. So you can enjoy  
shooting with different colors. For example,  
when adjusting with red, blue or yellow  
colors, the image becomes the color which  
approximates to green, orange or purple  
respectively.  
Point the camcorder at a white, flat object such as a  
1
2
3
sheet of white paper.  
SELECT MWB  
Follow step 1 through 3 of the above, select  
“MWB”.  
MEMORIZE WHITE BALANCE  
Press the MENU Jog Dial until “MWB” begins  
blinking. “MWB” blinks while the white balance is  
being stored in memory, then the Menu Screen  
reappears when memorization is complete.  
CLOSE MENU  
It is helpful to connect your camcorder to a  
color monitor when adjusting the white  
balance (pg. 35).  
Press the MENU Jog Dial.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
32  
EN  
Self-Timer  
Recording  
Start/Stop Button  
You can set the delay between pressing the Recording  
Start/Stop Button and the actual start of recording. If you  
secure the camcorder, you (or whomever is operating the  
camcorder) can enter the scene before recording starts.  
NOTE:  
Make sure the camcorder is in the Record-Standby mode  
before performing the following steps.  
ACCESS MENU SCREEN  
Turn the Select Dial to any position except AUTO  
Select Dial  
1
2
3
LOCK, then press the MENU Jog Dial.  
MENU Jog Dial  
ACCESS INT. TIME MENU SCREEN  
Rotate the MENU Jog Dial to move the highlight bar  
to “INT. TIME”, then press the MENU Jog Dial.  
Viewfinder  
MENU  
Menu  
Screen  
4
MENU END  
FOCUS  
AUTO  
EXPOSURE  
DATE TIME  
AUTO  
SET INTERVAL TIME  
DEC 25.98  
TELE MACRO OFF  
TAPE LENGTH T30  
Rotate the MENU Jog Dial to move the highlight bar  
to the desired time, then press the MENU Jog Dial.  
The Menu Screen reappears and the highlight bar is  
placed on “MENU END”.  
M. W. B.  
AUTO  
ZOOM SPEED FAST  
4
NEXT  
CLOSE MENU  
Press the MENU Jog Dial.  
4
BACK  
REC TIME  
INT. TIME  
OFF  
OFF  
4
5
GR-AX77 only  
TALLY LAMP ON  
TITLE LANG.  
JLIP ID NO.  
DEMO MODE OFF  
ENGLISH  
07  
START DELAYED RECORDING  
Press the Recording Start/Stop Button. When the  
selected time has elapsed, recording begins  
automatically.  
4
MENU END  
To Cancel Self-Timer . . .  
INT. TIME  
REC TIME  
... Before the recording begins, press the Recording Start/  
Stop Button to display “  
TIME” in the Menu Screen to “OFF”.  
”, then set “INT.  
PAUSE  
OFF  
OFF  
15 S  
1 4 S  
1 2 S  
1 S  
30 S  
1 MIN  
5 MIN  
5 S  
EXIT  
EXIT  
INT. TIME Menu  
REC TIME Menu  
INT. TIME Indicator  
INT. TIME and  
REC TIME  
indications on the  
normal screen  
15S  
1S  
REC TIME Indicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
33  
Animation  
Time-Lapse  
Give stationary scenes or objects an illusion of  
movement. This function allows you to shoot a  
series of pictures, each slightly different, of the same  
object for a brief period of time.  
You can record sequentially at preset time spans.  
Leaving the camcorder aimed at a specific subject,  
you can record subtle changes over an extended  
period of time.  
NOTE:  
NOTE:  
Make sure the camcorder is in the Record-Standby  
mode and the recording mode is set to “SP” before  
performing the following steps.  
Make sure the camcorder is in the Record-Standby  
mode and the recording mode is set to “SP” before  
performing the following steps.  
ACCESS MENU SCREEN  
ACCESS MENU SCREEN  
Turn the Select Dial to any position except  
Turn the Select Dial to any position except  
1
2
AUTO LOCK, then press MENU Jog Dial.  
1
2
AUTO LOCK, then press MENU Jog Dial.  
SET RECORDING TIME  
SET INTERVAL BETWEEN  
Rotate the MENU Jog Dial to move the  
highlight bar to “REC TIME”, then press the  
MENU Jog Dial. The REC TIME Menu appears.  
Rotate the MENU Jog Dial to move the  
highlight bar to the desired time, then press the  
MENU Jog Dial. The Menu Screen reappears.  
Press the MENU Jog Dial again to exit the  
Menu Screen.  
RECORDINGS  
Rotate the MENU Jog Dial to move the  
highlight bar to “INT. TIME”, then press the  
MENU Jog Dial. The INT. TIME Menu appears.  
Rotate the MENU Jog Dial to move the  
highlight bar to the desired time, then press the  
MENU Jog Dial. The Menu Screen reappears.  
SET RECORDING TIME  
START RECORDING  
Rotate the MENU Jog Dial to move the  
highlight bar to “REC TIME”, then press the  
MENU Jog Dial. The REC TIME Menu appears.  
Rotate the MENU Jog Dial to move the  
highlight bar to the desired time, then press the  
MENU Jog Dial. The Menu Screen reappears.  
Press the MENU Jog Dial again to exit the  
Menu Screen.  
Press the Recording Start/Stop Button after  
focusing on the subject. The recording stops  
automatically after the selected period of time.  
3
3
ASSEMBLE SERIES OF  
PICTURES  
Repeat step 3 for the desired number of  
pictures.  
4
5
START TIME-LAPSE  
RELEASE ANIMATION MODE  
RECORDING  
Set “REC TIME” in the Menu screen to “OFF”.  
Press the Recording Start/Stop Button.  
Recording and intervals alternate  
automatically.  
4
5
NOTES:  
RELEASE TIME-LAPSE MODE  
For best results, make sure the camcorder is  
secured when shooting in Animation or Time-  
Lapse mode.  
To release when “  
” is displayed, set  
PAUSE  
“REC TIME” and “INT. TIME” in the Menu  
Screen to “OFF”. To release when  
” and “REC ” are not displayed,  
Fade-in/out cannot be performed during  
Animation or Time-Lapse shooting.  
Before performing other operations following  
Animation or Time-Lapse recording, make sure  
the Animation or Time-Lapse mode is deactivated.  
Self-Timer, Animation and Time-Lapse are  
canceled when the power is shut off or when the  
cassette is ejected.  
PAUSE  
press the Recording Start/Stop Button to display  
”, then set “REC TIME” and “INT.  
TIME” in the Menu Screen to “OFF”.  
PAUSE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Using The Cassette Adapter  
34  
EN  
Cassette Adapter (VHS Playpak)  
Use this to play back a VHS-C video cassette recorded  
with this camcorder. It is fully compatible with any VHS  
video cassette recorder. The C-P7U adapter is battery  
powered and automatically performs tape loading and  
unloading.  
INSERT BATTERY  
Slide the battery cover up to remove it, and install  
one “AA(R6)” size battery as shown in the  
illustration at left. Then reattach the cover.  
1
2
3
VCR  
INSERT CASSETTE IN ADAPTER  
Slide the latch to open the adapter compartment  
door, then insert the cassette and close the  
compartment door.  
Compartment door  
PLAY BACK ON CONNECTED VCR  
Load the cassette adapter into the VCR and play the  
tape back as you would any other.  
REMOVE CASSETTE FROM  
ADAPTER  
Slide the latch and the compartment door opens  
automatically. This may take around 10 seconds. Do  
not attempt to force the adapter open. Then insert  
your finger in the hole on the underside of the  
adapter as shown in the illustration at left, push up  
and remove the cassette.  
4
Sliding latch  
Reels  
Compact  
video cassette  
NOTES:  
For GR-AX77: “AA(R6)” size battery is supplied with  
the provided Cassette Adapter.  
For GR-AX47: “AA(R6)” size battery is NOT supplied  
with the provided Cassette Adapter. Separate purchase  
necessary.  
During tape loading and unloading, do not touch the  
reels for safety and tape protection.  
During special-effect playback (slow motion, still  
frame, etc.), the picture may vibrate or noise bars may  
appear on the screen.  
Recording safety hole  
To record on a VCR using a compact cassette and the  
adapter, cover the adapters recording safety hole with  
adhesive tape.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Connections  
EN  
35  
There are three basic types of connections. When making  
the connections, refer also to your VCR and TV  
instruction manuals.  
A
Connection To A VCR (Editing, Dubbing  
and Playback)  
When  
NOTE:  
connecting  
the cables,  
Use the optional Audio and Video cables.  
To AUDIO and VIDEO  
open the  
OUT connectors  
jack cover.  
CONNECT CAMCORDER TO VCR  
(GR-AX77  
As shown in the illustration at left, connect the  
Audio and Video  
only)  
1
Audio and Video cables between the AUDIO and  
VIDEO OUT connectors on the camcorder and  
those on the VCR.  
cables (optional)  
SUPPLY POWER  
To AUDIO and  
VIDEO IN  
connectors  
Turn on the camcorder, the VCR and the TV.  
2
3
SELECT MODE  
VCR  
Set the VCR to its AUX input mode, and set the TV  
to its VIDEO mode.  
Connection To A TV With A/V Input  
Antenna  
B
Connectors (Playback ONLY)  
NOTE:  
Use the optional Audio and Video cables.  
To AUDIO,  
VIDEO and  
RF DC OUT  
connectors  
CONNECT CAMCORDER TO TV  
As shown in the illustration at left, connect the  
1
2
Audio and Video cables between the AUDIO and  
VIDEO OUT connectors on the camcorder and  
those on the TV.  
RF unit RF-V5U  
(optional)  
SELECT MODE  
Set the TV to its VIDEO or AV mode (as specified in  
its instructions).  
NOTES:  
It is recommended to use the AC Power  
Adapter/Charger as the power supply instead  
of the battery pack.  
To monitor the picture and sound from the  
camcorder without inserting a tape, set the  
camcorder’s Power Switch to “CAMERA”,  
then set your TV to the appropriate input  
mode.  
If you have a TV or speakers that are not  
specially shielded, do not place the speakers  
adjacent to the TV as interference will occur  
in the camcorder playback picture.  
Connection To A TV With NO A/V Input  
Connectors (Playback ONLY)  
NOTE:  
Use the optional RF-V5U RF unit.  
* Refer to the RF-V5U instruction manual for connection  
procedure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Playback  
36  
EN  
PLAY/PAUSE  
LOAD A CASSETTE  
Slide EJECT to open the cassette holder, then insert  
the cassette with the label facing out. Press PUSH to  
ensure the holder is closed and locked.  
1
FF  
REW  
SELECT MODE  
Set the Power Switch to “PLAY”. The power  
indicator lights.  
2
3
4
STOP  
PLAY BACK  
Press PLAY/PAUSE. The playback picture appears.  
STOP PLAYBACK  
Press STOP.  
Rewind or Fast-forward the tape  
Press REW to rewind, or FF to fast-forward the tape  
during Stop mode.  
Power Switch  
NOTE:  
The camcorder shuts off automatically after about 5  
minutes in Stop mode. To turn on again, set the Power  
Switch to “POWER OFF”, then to “PLAY”.  
Recording mode indicator  
Tape running indicator  
SP  
4
M–0:23:45  
4
3
: Playback  
: Fast-Forward/  
Forward Search  
: Rewind/Reverse  
Search  
2
6 : Still Playback  
Tape counter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Features  
EN  
37  
Tracking  
AT  
This function can be used to eliminate noise bars that  
appear on-screen during playback. Initial setting is Auto  
Tracking. Manual Tracking is also available.  
ACTIVATE MANUAL TRACKING  
Press the MENU Jog Dial during playback mode.  
1
Keep rotating it until noise bars disappear.  
To return to Auto Tracking, press the MENU Jog  
Dial. “AT” blinks. When Auto Tracking finishes,  
the indication disappears.  
NOTES:  
When noise bars appear during playback, the  
camcorder enters the Auto Tracking mode and “AT” is  
displayed.  
Manual Tracking may not work with tapes recorded on  
other VCRs or camcorders.  
MENU Jog Dial  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Features (cont.)  
38  
EN  
FEATURE:  
PURPOSE:  
Still Playback  
To pause during playback.  
COUNTER R/M  
OPERATION:  
1) Press PLAY/PAUSE during  
playback.  
2) To resume normal playback, press  
PLAY/PAUSE again.  
Noise bars appear and pictures may  
become monochrome during Still  
Playback. This is normal.  
PLAY/PAUSE  
FF  
NOTE:  
REW  
STOP  
FEATURE:  
PURPOSE:  
Shuttle Search  
To allow high-speed search in either  
direction.  
OPERATION:  
Forward Search  
1) Press FF during playback.  
Reverse Search  
1) Press REW during playback.  
Noise bars appear and pictures may  
become monochrome or darken in  
Shuttle Search. This is normal.  
NOTE:  
FEATURE:  
PURPOSE:  
Counter Memory Function  
To make it easier to locate a specific  
tape segment.  
OPERATION:  
1) Press COUNTER R/M and hold for  
more than 1 second. The counter  
resets to “0:00:00”.  
2) Press COUNTER R/M for less than  
1 second. “M” appears.  
3) After recording or playback, press  
STOP, then REW. The tape  
automatically stops at or close to  
0:00:00.  
4) Press PLAY/PAUSE to start  
playback.  
NOTES:  
The counter memory functions in  
the Fast-Forward and Rewind  
modes.  
To disable Counter Memory  
Function, press COUNTER R/M for  
less than 1 second so the “M”  
disappears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TAPE DUBBING  
EN  
39  
Tape Dubbing  
CONNECT EQUIPMENT  
Following the illustration at left, connect the  
camcorder and the VCR.  
1
2
PLAY/PAUSE  
PREPARE FOR DUBBING  
Set the camcorders Power Switch to “PLAY”, turn  
on the VCR’s power, and insert the appropriate  
cassettes in the camcorder and the VCR.  
SELECT VCR MODE  
Engage the VCR’s AUX and Record-Pause modes.  
3
4
FIND EDIT-IN POINT  
Engage the camcorder’s Play mode to find a spot  
just before the edit-in point. Once it’s reached, press  
PAUSE on the camcorder.  
Power Switch  
When connecting  
the cables, open  
the jack cover.  
(GR-AX77 only)  
START EDITING  
Press PLAY on the camcorder and engage the VCR’s  
Record mode.  
To AUDIO and  
VIDEO OUT  
connectors  
5
6
7
STOP EDITING TEMPORARILY  
Engage the VCR’s Record-Pause mode and press  
PAUSE on the camcorder.  
Audio and Video  
cables (optional)  
EDIT MORE SEGMENTS  
Repeat steps 4 through 6 for additional editing, then  
stop the VCR and camcorder when finished.  
To AUDIO and  
VIDEO IN  
connectors  
VCR (Recording deck)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER MAINTENANCE  
40  
EN  
LENS COVER  
After Use  
Open/Close Switch  
Set the Power Switch to “POWER OFF” to turn off  
the camcorder.  
1
2
3
4
5
Slide EJECT to open the cassette holder, then remove  
the cassette.  
Close and lock the cassette holder by pressing  
PUSH.  
Slide BATT. RELEASE to remove the battery pack.  
Slide the LENS COVER open/close switch to close  
the lens cover.  
Set to “POWER OFF”.  
BATT. RELEASE  
Cleaning The Camcorder  
EJECT  
CLEAN EXTERIOR  
Wipe gently with a soft cloth.  
1
CLEAN LENS  
Blow it with a blower brush, then wipe gently with  
2
3
lens cleaning paper.  
PUSH  
CLEAN VIEWFINDER  
Remove.  
1 Turn the eyepiece counterclockwise and pull  
it out.  
2 Remove dust using a blower brush.  
3 Align the marks, re-attach the eyepiece and turn  
it clockwise.  
NOTES:  
Avoid using strong cleaning agents such as benzine or  
alcohol.  
Cleaning should be done only after the battery pack  
has been removed or other power units have been  
disconnected.  
Marks  
Mold may form if the lens is left dirty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
EN  
41  
SYMPTOM  
POSSIBLE CAUSE(S)  
POWER  
No power is supplied.  
The battery pack has not been attached correctly  
(pg. 8).  
The battery pack is not charged (pg. 8).  
The power supply has not been correctly connected  
(pg. 9).  
The power suddenly goes off and  
doesn’t come back on by itself.  
The battery pack has completely discharged.  
Remove the cassette and disconnect the power source,  
then after a few minutes, try turning the power back on. If  
it still doesn’t come on, consult your nearest JVC dealer.  
RECORDING  
Recording cannot be performed.  
Make sure the Erase Protection tab is in the position that  
allows recording. If not, slide the tab. Some cassettes have  
removable tabs. If the tab has been removed, cover the  
hole with adhesive tape.  
Recording does not start.L  
The camcorder Power switch has not been set to  
“CAMERA” (pg. 16).  
PLAYBACK  
The tape is running, but there’s no  
playback picture.  
The TV has not been set to its VIDEO mode or channel.  
If A/V connection is used, the TV’s VIDEO/TV switch has  
not been set to VIDEO.  
The RF unit has not been set to the correct channel.  
Playback picture is blurred or  
interrupted.  
The video heads are dirty or worn out. Consult your  
nearest JVC dealer for head cleaning or replacement.  
The counter indication is blurred  
during Still playback.  
This is normal.  
TAPE TRANSPORT  
The tape stops during fast-forward  
or rewind.  
The Counter Memory Function has been activated  
(pg. 38).  
Rewinding or fast-forwarding  
cannot be performed.  
The tape is already fully wound on one reel or the other.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING (cont.)  
42  
EN  
SYMPTOM  
POSSIBLE CAUSE(S)  
OTHER  
The tape won’t eject.  
The battery pack is running low.  
Some functions are not available.  
The Select Dial is set to “AUTO LOCK”.  
Vertical white lines appear when  
shooting a very bright object.  
This sometimes occurs when the contrast between the  
background and the object is great. It is not a defect of the  
camcorder.  
Bright, crystal-shaped spots appear  
in the viewfinder.  
Sunlight is directly entering the lens. This is not a defect of  
the camcorder.  
The viewfinder and the lens have  
become dirty (ex. fingerprints).  
Wipe them gently with soft cloth.  
The picture is blurred in the Quick  
Review or Retake mode.  
This is normal while recording in the EP mode. Some  
noise may be present while recording in the SP mode  
(pg. 12).  
An error number (i.e. E03) appears.  
Turn the camcorder’s power off, then disconnect the  
power source. After a few minutes, try turning the power  
on again. If the error number still appears in the view-  
finder, consult your nearest JVC dealer.  
The image is out of focus.  
The diopter needs to be adjusted (pg. 14).  
The scene being shot is adversely affecting the operation  
of Auto Focus (pg. 28).  
The date and time displays  
disappear.  
If you remove the power source from the camcorder while  
the power is on, all settings and selections are erased.  
Make sure to turn the camcorders power off before  
disconnecting the power source.  
The wrong date and time are  
displayed/recorded.  
If you have not performed Date/Time Setting (pg. 11),  
the date and time are not displayed/recorded correctly. Be  
sure that Date/Time setting is carried out.  
Even though the Lens Cover is open,  
the Lens Cover Warning indicator  
blinks.  
The Lens Cover Warning indicator may blink when the  
camcorder is used in dark areas, regardless of the position  
of the Lens Cover.  
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,  
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit  
(battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and  
proceed as usual from the beginning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Indications  
EN  
43  
1 2 3 4  
5
6 7  
30MIN  
REC SP  
TWILIGHT  
4
S.LX  
T30  
8
%
&
^
*
444  
9
!
NORM 01  
LENS COVER MWB  
PAUSE  
0
5MIN  
1 4S TAPE END  
(
@
$
)
#
MERRY CHRISTMAS  
DEC 25.98 AM 11:45:18  
Viewfinder Indications  
1 Cassette Warning/  
@ Interval Timer/Recording Time/  
Tape Remaining Time ......................... pg. 17  
5Sec. Rec Mode Indicator ............ pgs. 19,32  
# Instant Title Display ............................ pg. 25  
$ Date/Time Display .............................. pg. 20  
% Battery Pack Remaining Power Indicator  
When no cassette is inserted: the cassette (  
warning blinks.  
When Erase Protection tab is not in the position  
that allows recording: the cassette ( ) warning  
lights. Otherwise, the tape remaining time is  
displayed and the tape remaining time warning  
blinks when the tape is about to reach its end.  
When the Power Switch is set to “PLAY” and a  
tape is loaded: the cassette (  
displayed regardless of the Erase Protection tab’s  
position.  
)
Changes as follows according to the battery  
pack’s remaining power level:  
”. When the power is  
almost gone, the indicator “ ” blinks (battery  
power warning), then the unit shuts off. Replace  
the battery pack with a fully charged one.  
Note: The symbol containing 3 darkened  
) mark is  
squares —  
— does not necessarily mean  
2 Recording Mode (SP/EP) Indicator....... pg. 12  
3, 9 Program AE Indicator ..................... pg. 22  
that the battery pack is fully charged.  
^ Focus Indicator ................................... pg. 29  
& Exposure Control Level Counter ......... pg. 30  
* White Balance Mode Indicator ........... pg. 31  
( Clock Battery Warning  
Displayed at 3 for approx. 1 second when the  
Select Dial is switched from one position to  
another. Then only the indicator remains at 9.  
3, 0 Fade-Standby Indicator .................. pg. 24  
Blinks for approx. 10 seconds when the power is  
turned on. This display also blinks when the  
clock (lithium) battery is either not installed or  
has discharged. Install or replace the old battery  
with a new one (pg. 10).  
Displayed at 3 for approx. 2 seconds when the  
Fader is engaged by pressing the EFFECT button.  
Then only the indicator remains at 0.  
4 Multi-Function Control Indication ......pg. 24  
Displayed when any of the buttons located on  
the Multi-Function Control is pressed. The  
indication disappears within approx. 2 seconds.  
) Tape End Display: TAPE END ........... pg. 17  
Appears when the end of the tape is reached  
during playback, recording or fast-forward.  
5 Super LoLux Indicator ......................... pg. 25  
6 Tape Length Indicator ......................... pg. 12  
7 Zoom Indicator Bar............................. pg. 18  
8 Recording Indicator ............................ pg. 16  
! Record–Standby Mode Indicator ......pg. 16  
•Condensation Warning:  
When this indication appears, all functions  
except tape eject and power on/off are  
disabled. Turn the unit off (without removing  
the power source) for a few hours, and when  
you turn it on again the indication should  
disappear.  
Lens Cover Warning:  
LENS COVER ...................................pg. 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Controls  
44  
EN  
5
6
7
u
1
9
0
!
4
8
p
^
i
o
2 3  
y
Q
)
E
@ # $ %  
(
T
W
q w e r  
R
& * t  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
45  
Controls  
Connectors  
1 Power Zoom Button ........................... pg. 18  
2 Select Dial ......................................... pg. 22  
3 Multi-Function Control  
) DC IN Jack ......................................... pg. 9  
The jacks q to r are located beneath the jack  
cover. (GR-AX77 only)  
q J terminal  
•EFFECT Button ................................. pg. 24  
•WIDE Button ................................... pg. 24  
•TITLE Button .................................... pg. 25  
•SUPER LOLUX Button ..................... pg. 25  
[JLIP (Joint Level Interface Protocol) Connector.]  
It is used to connect the camcorder to a device  
such as a personal computer.  
For further details consult your nearest JVC  
dealer.  
4 PUSH Button...................................... pg. 13  
5 Recording Mode [SP/EP] Button ......... pg. 12  
6 DATE/TIME Button ............................. pg. 20  
COUNTER R/M Button ....................... pg. 38  
7 5SEC. REC [5-sec recording] Button ... pg. 19  
JLIP-controlled editing from camcorder to VCR  
is not possible if the VCR is not equipped with  
a J terminal.  
w VIDEO OUT Connector ..................... pg. 35  
e RF DC OUT Connector ...................... pg. 35  
r AUDIO OUT Connector .................... pg. 35  
8 REW Button ....................................... pg. 36  
RETAKE R [Quick Review] Button ...... pg. 19  
9 PLAY/PAUSE Button ........................... pg. 36  
0 FF Button ........................................... pg. 36  
RETAKE F Button ................................ pg. 19  
Indicators  
t Power Indicator .................................. pg. 16  
y Tally Lamp (GR-AX77 only)................ pg. 16  
! STOP Button ...................................... pg. 36  
@ EJECT Switch ...................................... pg. 13  
Other Parts  
u Video Light (GR-AX77 only) ............... pg. 21  
i Microphone  
# Function Navigator Dial  
[MENU Jog Dial] ................................ pg. 11  
$ LIGHT OFF/AUTO/ON Switch  
(GR-AX77 only) .................................. pg. 21  
o Camera sensor  
Be careful not to cover this area; built-in here is  
the sensor necessary for shooting.  
% BATT. [Battery] RELEASE Switch ......... pg. 8  
^ Diopter Adjustment ............................ pg. 14  
& Recording Start/Stop Button................ pg. 16  
* Power Switch ................................ pg.16, 36  
( LENS COVER Switch .......................... pg. 16  
p Clock Battery Compartment ............... pg. 10  
Q Battery Pack Mount ............................ pg. 8  
W Shoulder Strap Eyelets ........................ pg. 15  
E Electronic Viewfinder ......................... pg. 14  
R Grip Strap .......................................... pg. 14  
T Tripod Mounting Socket ..................... pg. 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Terms  
46  
EN  
A
N
AC Power Adapter .................................. pg. 8  
Animation Recording .............................. pg. 33  
Auto Date Record ................................... pg. 20  
Auto Focus.............................................. pg. 28  
Auto Mode Lock Mode ........................... pg. 23  
Auto Mode Release Mode ....................... pg. 23  
ND Effect Mode ...................................... pg. 23  
P
Playback ................................................. pg. 36  
Program AE with Special Effects .............. pg. 22, 23  
Provided Accessories .............................. pg. 6  
Q
B
Quick Review ......................................... pg. 19  
Battery Pack ............................................ pg. 8, 47  
Brighten the Image .................................. pg. 30  
R
C
Recording, Advanced Features ................ pg. 22–33  
Recording ............................................... pg. 16  
Recording, Start/Stop............................... pg. 16, 17  
Recording Mode Setting.......................... pg. 12  
Record-Standby ...................................... pg. 16  
Remove Cassette ..................................... pg. 13  
Retake..................................................... pg. 19  
Rewind Tape ........................................... pg. 36  
Car Battery .............................................. pg. 9  
Cassette Adapter ..................................... pg. 34  
Charge Marker ........................................ pg. 9  
Charging the Battery Pack ....................... pg. 8  
Clock (Lithium) Battery ........................... pg. 10  
Connection to a VCR/TV ......................... pg. 35  
Contents ................................................. pg. 7  
Counter Memory ..................................... pg. 38  
S
D
Self-Timer ............................................... pg. 32  
Sepia Mode............................................. pg. 23  
Shoulder Strap Attachment ...................... pg. 15  
Shuttle Search ......................................... pg. 38  
Specifications.......................................... pg. 49  
Sports Mode............................................ pg. 23  
Still Playback .......................................... pg. 38  
Super LoLux ............................................ pg. 25  
Darken the Image ................................... pg. 30  
Date/Time Insert...................................... pg. 20  
Date/Time Setting.................................... pg. 11  
DEMO Mode .......................................... pg. 27  
Discharge the Battery pack...................... pg. 8  
Diopter Adjust......................................... pg. 14  
E
T
Electronic Fog Filter Mode ...................... pg. 23  
Erase Protection ...................................... pg. 13  
Exposure Control .................................... pg. 30  
Tape Counter .......................................... pg. 36  
Tape Dubbing ......................................... pg. 39  
Tape Length Setting ................................. pg. 12  
Time-Lapse Shooting ............................... pg. 33  
Tracking .................................................. pg. 37  
Tripod Mounting ..................................... pg. 15  
Twilight Mode ......................................... pg. 23  
F
Fade-in/out ............................................. pg. 24  
Fast-Forward Tape ................................... pg. 36  
5Sec. Rec ................................................ pg. 19  
G
V
Grip Adjustment...................................... pg. 14  
Video Light ............................................. pg. 21  
Viewfinder Adjustment ............................ pg. 14  
Viewfinder, indications............................ pg. 43  
H
High Speed Shutter Mode ....................... pg. 23  
W
I
White Balance Adjustment ...................... pg. 31  
Wide Mode ............................................. pg. 24  
Insert Cassette ......................................... pg. 13  
Instant Titles ............................................ pg. 25  
Z
M
Zooming ................................................. pg. 18  
Manual Focus ......................................... pg. 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
EN  
47  
DANGER:  
Video Light  
General Battery Precautions  
When the C-P6U or C-P7U (cassette adapter) is not  
functioning even when correctly operated, the battery  
is exhausted. Replace it with a fresh one.  
• The video light becomes extremely hot. Do not touch  
it either while in operation or soon after turning it off,  
otherwise serious injury may result.  
Use only the following battery:  
C-P6U or C-P7U ....................... AA (R6) size  
• Do not place the camcorder into the carrying case  
immediately after using the video light, since it  
remains extremely hot for some time.  
Please make note of the following rules for battery use.  
When misused, battery can leak or explode.  
• When operating, keep a distance of about 30 cm  
(1 ft.) between the video light and people or object.  
• Do not use near flammable or explosive materials.  
• It is recommended that you consult your nearest JVC  
dealer for replacing the video light.  
1. Refer to the C-P6U/C-P7U instructions when  
replacing the battery.  
2. Do not expose the battery to excessive heat as it can  
leak or explode.  
3. Do not dispose of battery in a fire.  
4. Remove battery from the unit if it is to be stored for  
an extended period to avoid battery leakage which  
can cause malfunctions.  
When using the AC Power Adapter/Charger in  
areas other than the USA  
The provided AC Power Adapter/Charger features  
automatic voltage selection in the AC range from 110  
V to 240 V.  
Battery Packs  
The supplied battery pack is a  
nickel-cadmium battery. Before using  
the supplied battery pack or an optional  
battery pack, be sure to read the  
following cautions:  
USING HOUSEHOLD AC PLUG ADAPTER  
In case of connecting the unit’s power cord to an AC  
wall outlet other than American National Standard C73  
series type use an AC plug adapter, called a “Siemens  
Plug”, as shown.  
1. To avoid hazard . . .  
For this AC plug adapter, consult your nearest JVC  
..... do not burn.  
dealer.  
Plug adapter  
..... do not short-circuit the terminals.  
Terminals  
..... do not modify or disassemble.  
..... use only specified chargers.  
2. To prevent damage and prolong service life . . .  
..... do not subject to unnecessary shock.  
..... avoid repeated charging without fully  
discharging.  
INFORMATION  
This device complies with Part 15 of FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired  
operation. Change or modifications not approved by  
the party responsible for compliance could void the  
users authority to operate the equipment. This  
equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio  
or television reception, which can be determined by  
turning the equipment off and on, the user is encour-  
aged to try to correct the interference by one or more of  
the following measures:  
..... charge in an environment where temperatures  
are within the tolerances shown in the chart  
below. This is a chemical reaction type  
battery—cooler temperatures impede chemical  
reaction, while warmer temperatures can  
prevent complete charging.  
..... store in a cool, dry place. Extended exposure to  
high temperatures will increase natural  
discharge and shorten service life.  
..... avoid prolonged uncharged storage.  
..... remove from charger or powered unit when not  
in use, as some machines use current even  
when switched off.  
NOTES:  
It is normal for the battery pack to be warm after  
charging, or after use.  
Temperature Range Specifications  
Charging ............... 10°C to 35°C (50°F to 95°F)  
Operation.............. 0°C to 40°C (32°F to 104°F)  
Storage .................. –10°C to 30°C (14°F to 86°F)  
Recharging time is based on room temperature of  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
20°C.  
The lower the temperature, the longer recharging  
takes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS (cont.)  
48  
EN  
3. DO NOT leave the unit . . .  
Cassettes  
.... in places of over 50°C (122°F).  
.... in places where humidity is extremely low.  
(below 35%) or extremely high (above 80%).  
.... in direct sunlight.  
.... in a closed car in summer.  
.... near a heater.  
To properly use and store your cassettes, be sure to  
read the following cautions:  
1. During use . . .  
.... make sure the cassette bears the VHS-C  
mark.  
.... be aware that recording onto prerecorded  
tapes automatically erases the previously  
recorded video and audio signals.  
.... make sure the cassette is positioned properly  
when inserting.  
.... do not load and unload the cassette  
repeatedly without allowing the tape to run  
at all. This slackens the tape and can result in  
damage.  
.... do not open the front tape cover. This  
exposes the tape to fingerprints and dust.  
4. To protect the unit, DO NOT . . .  
.... allow it to become wet.  
.... drop the unit or strike it against hard objects.  
.... subject it to shock or excessive vibration  
during transportation.  
.... keep the lens directed at extremely bright  
objects for long periods.  
.... direct the eyepiece of the viewfinder at the  
sun.  
.... carry it by holding the viewfinder. Be sure to  
hold the main unit with both hands or use  
the grip.  
2. Store cassettes . . .  
.... swing it excessively when using the shoulder  
strap.  
.... away from heaters or other heat sources.  
.... out of direct sunlight.  
.... where they won’t be subject to unnecessary  
shock or vibration.  
.... where they won’t be exposed to strong  
magnetic fields (such as those generated by  
motors, transformers or magnets).  
.... vertically, in their original cases.  
About moisture condensation . . .  
You may have observed that pouring a cold  
liquid into a glass will cause drops of water to  
form on the glass’ outer surface. This same  
phenomenon occurs on the head drum of a  
camcorder when it is moved from a cool  
place to a warm place, after heating a cold  
room, under extremely humid conditions or  
in a place directly subjected to the cool air  
from an air conditioner.  
Main Unit  
1. For safety, DO NOT . . .  
.... open the camcorder’s chassis.  
.... disassemble or modify the unit.  
.... short-circuit the terminals of the battery pack.  
Keep it away from metallic objects when not  
in use.  
.... allow inflammables, water or metallic objects  
to enter the unit.  
.... remove the battery pack or disconnect the  
power supply while the power is on.  
.... leave the battery pack attached when the  
camcorder is not in use.  
Moisture on the head drum can cause severe  
damage to the video tape, and can lead to  
internal damage to the camcorder itself.  
Serious malfunctioning  
2. Avoid using the unit . . .  
If malfunctioning occurs, stop using the unit  
immediately and consult your local JVC dealer.  
.... in places subject to excessive humidity or  
dust.  
.... in places subject to soot or steam such as  
near a cooking stove.  
.... in places subject to excessive shock or  
vibration.  
.... near a television set.  
.... near appliances generating strong magnetic  
or electric fields (speakers, broadcasting  
antennas, etc.).  
.... in places subject to extremely high (over  
40°C or 104°F) or extremely low (under 0°C  
or 32°F) temperatures.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
GENERAL  
EN  
49  
AUDIO  
Output  
Format  
: VHS NTSC standard  
: –8 dBs, 1 k-ohm  
(via AUDIO OUT  
connector)  
Power source  
Power consumption  
GR-AX77 light on  
GR-AX77 light off /  
GR-AX47  
: DC 6V  
: 7.8 W  
AC POWER ADAPTER/BATTERY CHARGER  
(AA-V15U)  
: 5.1 W  
: NTSC-type  
Signal system  
Video recording system  
Luminance  
Power requirement  
U.S.A. and Canada : AC 120 V`, 60 Hz  
: FM recording  
: Converted sub-carrier  
direct recording  
Conforms to VHS  
standard  
Other countries  
: AC 110 V to 240 V`,  
50/60 Hz  
Color  
Power consumption  
Output  
Charge  
VTR  
Charging system  
: 23 W  
: DC 8.5 V  
: DC 6.3 V  
, 1.3 A  
, 1.8 A  
: Constant current,  
peak detection,  
timer controlled  
: 140 (W) x 42 (H) x  
68 (D) mm (5-9/16” x  
1-11/16” x 2-11/16”)  
: Approx. 300 g (0.71 lbs)  
Cassette  
Tape speed  
SP  
:
cassette  
: 33.35 mm/sec.  
(1-5/16 ips)  
: 11.12 mm/sec. (7/16 ips)  
EP  
Dimensions  
Weight  
Recording time (max.)  
SP  
EP  
: 40 minutes  
: 120 minutes  
(with TC-40 cassette)  
CASSETTE ADAPTER (C-P7U)  
Dimensions  
Operating temperature : 0°C to +40°C  
(32°F to 104°F)  
: 188 (W) x 25 (H) x  
Operating humidity  
Storage temperature  
: 35% to 80%  
: –20°C to +50°C  
(–4°F to 122°F)  
104 (D) mm (7-7/16” x  
1” x 4-1/8”)  
Weight  
: Approx. 240 g (0.53 lbs)  
Weight  
Provided Accessories ...................... pg. 6  
GR-AX77  
GR-AX47  
Dimensions  
: Approx. 790 g (1.8 lbs)  
: Approx. 780 g (1.8 lbs)  
Optional Accessories  
(Including viewfinder) : 113 (W) x 117 (H) x  
222 (D) mm (4-1/2” x  
•Battery Packs BN-V12U, BN-V22U, BN-V25U  
•Car Battery Charger BH-V3U  
•Battery Charger BH-VC10U  
•Car Battery Cord AP-V7U  
4-5/8” x 8-3/4”)  
CAMERA  
•RF Unit RF-V5U  
Pick up  
Lens  
: 1/4” format CCD  
•Compact VHS-C Cassettes TC-40/30/20  
•Active Carrying Bag CB-V7U  
: F1.6, f = 3.8 to 83.6 mm,  
22:1 power zoom lens  
with auto iris and macro  
control, filter diameter  
46 mm  
Some acccessories are not available in some areas.  
Please consult your nearest JVC dealer for details on  
accessories and their availability.  
Viewfinder  
: Electronic viewfinder  
with 0.55” color LCD  
Specifications shown are for SP mode unless  
otherwise indicated.  
E. & O. E. Design and specifications subject to  
change without notice.  
White balance  
adjustment  
: Auto/Manual adjustment  
VIDEO  
Output  
: 1 Vp-p, 75 ohms,  
unbalanced (via VIDEO  
OUT connector)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
50  
EN  
Marcas  
Alimentación  
A la toma de  
corriente alterna  
Esta cámara de video posee un sistema de alimentación  
de 3 vías que le permite seleccionar la fuente de  
alimentación más apropiada.  
Indicador  
CHG. (carga)  
NOTAS:  
Sin alimentación no hay ninguna función disponible.  
Utilice exclusivamente la alimentación indicada.  
No utilice la unidades de alimentación suministradas con  
otro equipo.  
Interruptor REFRESH  
Indicador REFRESH  
REFRESCADO  
El adaptador de CA se caracteriza por la  
función REFRESH que le permite descargar  
totalmente la batería antes de recargarla.  
Efectúe la función REFRESH después de un  
mínimo de 5 cargas.  
CARGA DE LA BATERIA  
ALIMENTACION  
Conecte el cable de alimentación de CA del cargador a  
una toma de corriente.  
1
COLOCACION DE LA BATERIA  
Alinee las marcas y deslice la batería en la dirección de  
la flecha hasta que quede bloqueada en su lugar.  
El indicador CHG. comienza a parpadear indicando  
que se ha iniciado la carga.  
2
Para descargar las baterías . . .  
..... coloque la batería en el adaptador como  
se muestra en la ilustración arriba. Luego  
presione REFRESH. El indicador  
REFRESH se enciende cuando se inicia  
la descarga y se apaga cuando la  
descarga ha terminado.  
EXTRACCION DE LA BATERIA  
Cuando el indicador CHG. para de destellear, pero  
continúa encendido, la carga ha terminado. Deslice la  
batería en el sentido opuesto al de la flecha.  
3
Enganche.  
BATERIA  
BN-V11U  
BN-V12U  
BN-V18U  
BN-V22U  
BN-V25U  
CARGA  
DESCARGA  
aprox. 3 h 30 m  
aprox. 3 h 30 m  
aprox. 5 h 30 m  
aprox. 7 h  
1
aprox. 1 h 10 m  
aprox. 1 h 10 m  
aprox. 1 h 40 m  
aprox. 2 h 10 m  
aprox. 2 h 40 m  
aprox. 10 h  
Empuje.  
2
BATT. RELEASE  
USO DE LA BATERIA  
COLOCACION DE LA BATERIA  
Indicador  
INDICADOR DE CARGA  
Enganche la parte superior del mismo en la cámara de  
video y empújela hasta que se bloquee en su lugar.  
de carga  
(BATERIA OPCIONAL  
1
2
EXCLUSIVAMENTE)  
Se ha suministrado un indicador de  
carga sobre la batería para ayudarle  
a recordar si ha sido cargado o no.  
Los dos colores suministrados (rojo  
y negro), le permiten seleccionar la  
carga y la descarga.  
EXTRACCION DE LA BATERIA  
Deslice BATT. RELEASE y extraiga la batería.  
Tiempo de grabación aproximado (unidad: min)  
• La batería BN-V18U no tiene el  
indicador de carga.  
BATERIA  
BN-V11U  
BN-V12U  
BN-V18U  
BN-V22U  
BN-V25U  
GR-AX77  
GR-AX47  
75  
75 (40)  
110 (70)  
150 (95)  
200 (120)  
75  
ATENCION:  
Antes de desmontar la fuente de alimenta-  
ción, asegúrese que la alimentación de la  
cámara de video esté desconectada. El no  
hacerlo puede producir una falla de  
funcionamiento en la cámara de video.  
150  
200  
(
) : cuando el foco de video está encendido.  
(GR-AX77 exclusivamente)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUIA PARA OPERACION RAPIDA  
Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario local de JVC.  
EN  
51  
ALIMENTACION  
INSERCION DEL CASSETTE  
DE VIDEO  
Enganche.  
1
EJECT  
Empuje.  
2
1
BATT. RELEASE  
3
PUSH  
2
Utilización de la batería  
1 Enganche el extremo superior de la batería  
en la cámara de video. (Procedimiento para  
carga, P. 8)  
1 Deslice EJECT para abrir el portacassette.  
2 Inserte cassette de video.  
3 Presione PUSH para cerrar el portacassette.  
(Por más detalles, P. 13.)  
2 Empuje la batería hacia adentro hasta que  
quede bloqueada en su lugar.  
Para extraer la batería  
Deslice BATT. RELEASE y extraiga la batería.  
REPRODUCCION  
FILMACION  
PLAY/PAUSE (reproducción/pausa)  
3
1
Perilla de  
abertura/cierre  
LENS COVER  
2
Colóquelo en “CAMERA”.  
3
1
2
Colóquelo  
en “PLAY”.  
Botón para inicio/parada de grabación  
REW  
STOP  
(rebobinado) (parada)  
1 Ajuste el interruptor de alimentación en  
1 Deslice la perilla de abertura/cierre LENS  
COVER para abrir la tapa del objetivo.  
2 Adjuste el interruptor de alimentación en  
“CAMERA”.  
— El indicador de alimentación se  
encenderá y aparecerá una imagen.  
“PLAY”.  
2 Presione REW.  
— La cinta se detiene automáticamente al  
comienzo de la misma.  
3 Presione PLAY/PAUSE.  
— Comienza la reproducción y la imagen  
aparece.  
•Presione STOP para detener la grabación.  
(Por más detalles, P. 36.)  
3 Presione el botón inicio/parada de  
grabación.  
— Comenzará la grabación.  
•Para detener temporariamente la grabación,  
presione nuevamente el botón de inicio/  
parada de grabación. (Por más detalles,  
P. 16, 17.)  
O simplemente reproduzca la cinta en un  
VCR de VHS utilizando el adaptador de  
cassette (VHS Playpak). P. 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR SERVICING (Only in U.S.A.)  
52  
EN  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1-800-252-5722  
Dear customer:  
In order to receive the most satisfaction from your purchase, read the instruction booklet before  
operating the unit. In the event that repair is necessary, or for the address nearest your location,  
please refer to the factory service center list below or within the Continental United States, call 1-800-  
252-5722 for your authorized servicer. Remember to retain your Bill of Sale for Warranty Service.  
— JVC  
JVC SERVICE & ENGINEERING  
COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
FACTORY SERVICE CENTER LOCATIONS  
107 Little Falls Road  
Fairfield, NJ 07004-2105  
(973) 808-9279  
1500 Lakes Parkway  
Lawrenceville, GA 30243-5857  
(770) 339-2522  
705 Enterprise Street  
Aurora, IL 60504-8135  
(630) 851-7855  
5665 Corporate Avenue  
Cypress, CA 90630-4727  
(714) 229-8011  
10700 Hammerly Blvd., Suite 110 2969 Mapunapuna Place, Suite 101  
Houston, TX 77043-2310  
(713) 935-9331  
Honolulu, HI 96819-2000  
(808) 833-5828  
230 Eliot Street  
Ashland, MA 01721-2377  
(508) 881-5923  
8192 West State Road 84  
Davie, FL 33324-4611  
(954) 472-1960  
890 Dubuque Avenue  
South San Francisco, CA 94080-1804  
(415) 871-2666  
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the  
engineering and production of the wide array of JVC products, service is the key to maintaining the  
high level performance for which JVC is world famous. The JVC service and engineering organization  
stands behind our products.  
NATIONAL HEADQUARTERS  
JVC SERVICE & ENGINEERING COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
107 Little Falls Road  
Fairfield, NJ 07004-2105  
If you ship the product...  
Pack your JVC unit in the original carton or one of equivalent size and strength. Enclose, with the unit,  
a letter stating the problem or symptom that exists and also a copy of the receipt or bill of sale you  
received when you purchased your JVC unit. Print your home return address on the outside and the  
inside of the carton. Send to the appropriate JVC Factory Service Center as listed above.  
Don't service it yourself.  
ACCESSORIES  
To purchase accessories for your JVC product, you  
may contact your local JVC Dealer.  
Or from the 48 Continental United States call toll free:  
1-800-882-2345.  
CAUTION  
To prevent electrical shock, do not open the  
cabinet. No user serviceable parts inside.  
Refer servicing to qualified service personnel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY (Only in U.S.A.)  
EN  
53  
LIMITED WARRANTY  
CONSUMER VIDEO 1-90  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO  
THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP  
from the date of original retail purchase for the period as shown below. ("The Warranty Period")  
PARTS  
LABOR  
1
YR  
90  
DAYS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF  
COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.  
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized  
service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All  
products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for  
Television sets having a screen size 25 inches and above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC  
authorized service center, please call toll free: (800) 252-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with  
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center,  
the name and location of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse,  
faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility  
authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if  
the model or serial number has been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of  
purchase;  
7. Accessories;  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);from the date  
of purchase);  
There are no other express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF  
MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY  
OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT  
LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT,  
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES,  
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE  
LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an  
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
41 Slater Drive  
Elmwood Park, New Jersey 07407  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR  
DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT  
WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain  
this information for future reference.  
Model No.:  
Serial No:  
Name of dealer:  
Purchase date:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
41 Slater Drive, Elmwood Park, N.J. 07407  
JVC CANADA INC.  
21 Finchdene Square,  
Scarborough Ontario M1X 1A7  
0P1ri9n8teMdKinV*JaUpNan*YP  
U
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Car Speaker BU 2 User Manual
Infinity Vacuum Cleaner NV28 User Manual
Invacare Mobility Aid 1073913 User Manual
iSymphony Headphones CR8CD User Manual
Jabra Headphones BT5020 User Manual
Jacuzzi Bathroom Aids HE96000 User Manual
JBL Speaker S36IIPM User Manual
Jensen MP3 Docking Station JiSS 585 User Manual
Jwin MP3 Player JX MP231 User Manual
KitchenAid Food Processor K5 A User Manual