COMFORT PLUS
WHIRLPOOL BATH SERIES
INSTALLATION AND OPERATION INSTRUCTIONS
Jacuzzi® Luxury Bath
14525 Monte Vista Avenue
Chino, CA 91710
1-800-288-4002
HE96000
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Contents
Contents.......................................................................................................................................................................... 3
Product Information......................................................................................................................................................... 3
Safety Instructions........................................................................................................................................................... 4
Operational Safety Instructions. ...................................................................................................................................... 6
Inspection and Testing..................................................................................................................................................... 8
Framing and Support....................................................................................................................................................... 8
Electrical Connections..................................................................................................................................................... 9
Drop-in Installation..........................................................................................................................................................11
3-Wall Alcove Installation............................................................................................................................................... 12
Skirt Installation............................................................................................................................................................. 13
Undermount Installation................................................................................................................................................. 13
Cleanup......................................................................................................................................................................... 14
General Operation Information...................................................................................................................................... 14
Whirlpool Operation....................................................................................................................................................... 14
Controlling Whirlpool Direction and Flow....................................................................................................................... 15
Purging the Whirlpool System....................................................................................................................................... 15
Bathtub Additives........................................................................................................................................................... 16
Maintenance.................................................................................................................................................................. 16
Troubleshooting Procedures. ........................................................................................................................................ 17
Technical Specifications. ............................................................................................................................................... 18
Authorized Service. ....................................................................................................................................................... 26
Warranty. ....................................................................................................................................................................... 27
Product Information
Save these instructions for future use. Use the form below to record your model and serial number for future
reference.
Date Purchased
Purchased From
Installed By
Serial Number
Model
Installer: Leave the manual for the homeowner.
Homeowner: Read this manual and keep for future reference.
Installation and Operation
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Safety Instructions
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS.
This is a professional grade product. A knowledge of construction techniques,
plumbing and electrical installation according to codes are required for proper
installation and user satisfaction. We recommend that a licensed contractor perform
the installation of all Jacuzzi® Luxury Bath products. Our warranty does not cover
improper installation related problems.
CAUTION: When using this unit, basic precautions should always be performed,
including the following:
• READ AND FOLLOW ALL
INSTRUCTIONS. SAVE THESE
INSTRUCTIONS.
Use this unit only for its intended use as described in this manual.
•
Do not use attachments not recommended by the manufacturer.
Never drop or insert any object into any opening.
•
WARNING: RISK OF ACCIDENTAL INJURY OR DROWNING!
Do not permit children to use this unit unless they are closely
supervised at all times. Do not use hydromassage bathtubs unless
all suction guards are installed to prevent body and hair
entrapment. Never operate the hydromassage bath if the suction
cover is broken, damaged or missing
DANGER: RISK OF SEVERE INJURY FROM ELECTRIC SHOCK OR DEATH
FROM ELECTROCUTION!
This unit must be connected only to a supply circuit that is
protected by a 15 amp ground fault circuit interrupter (GFCI). Such a
GFCI should be provided by the installer and should be tested on a
routine basis. Follow the manufacturer’s instructions when testing
the GFCI. The GFCI should interrupt power. Push the reset button.
Power should be restored. If the GFCI fails to operate in this manner,
the GFCI is defective. If the GFCI interrupts power to the bathtub
without the test button being pushed, a ground current is flowing,
indicating a possibility of an electric shock. Do not use this
hydromassage bathtub. Disconnect the hydromassage bathtub and
have the problem corrected by a qualified service representative
before using.
WARNING: RISK OF ELECTRIC SHOCK!
Do not permit electrical appliances (such as a hair dryer, lamp,
telephone, radio or television) within 60” (1524mm) of this
hydromassage bathtub. Connect only to a circuit protected by a
ground fault circuit interrupter (GFCI). (For permanently connected
units) A green colored terminal (or a wire connector) marked “G,”
“GR,” “GROUND,” or “GROUNDING”) is provided within the
terminal compartment. To reduce the risk of electric shock, connect
the terminal or connector to the grounding terminal of your electric
service or supply panel with a conductor equivalent in size to the
circuit conductors supplying the equipment.
Page 4
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Safety Instructions (Cont)
WARNING:
Do not operate this unit without the guard over the intake for
the circulation pump (suction cover/strainer).
CAUTION:
This equipment is intended for indoor use only. Install the
equipment in accordance with these instructions. Use supply
wires that are suitable for 167°F (75°C), including the
temperature rating of the supply conductors to be used. This
unit should be electrically grounded and installed by a licensed
contractor, electrician, and plumber. Building materials and
wiring should be routed away from the motor/pump or blower or
other heat producing components of this unit. A pressure
wire connector is provided on the exterior of the motor/pump
and heater to permit connection of an No. 8 AWG solid copper
bonding conductor between this unit and all other electric
equipment and exposed metal in the vicinity, as needed to
comply with local requirements.
When using this electrical equipment, basic safety precautions should
always be followed, including the following:
WARNING:RISK OF ACCIDENTAL INJURY OR DROWNING! CHILDREN
SHOULD NOT USE HYDROMASSAGE BATHTUB WITHOUT
ADULT SUPERVISION.
WARNING:RISK OF ACCIDENTAL INJURY OR DROWNING! DO NOT
USE HYDROMASSAGE BATHTUB UNLESS ALL SUCTION
GUARDS ARE INSTALLED TO PREVENT BODY AND HAIR
ENTRAPMENT.
WARNING:TO AVOID INJURY, ExERCISE CARE WHEN ENTERING OR
ExITING THE HYDROMASSAGE BATHTUB.
WARNING:RISK OF ACCIDENTAL INJURY OR DROWNING! DO NOT
USE DRUGS OR ALCOHOL BEFORE OR DURING THE USE OF A
HYDROMASSAGE BATHTUB EQUIPPED WITH A HEATER TO
AVOID UNCONSCIOUSNESS AND POSSIBLE DROWNING.
WARNING:RISK OF FETAL INJURY! PREGNANT OR POSSIBLY
PREGNANT WOMEN SHOULD CONSULT A PHYSICIAN BEFORE
USING A HYDROMASSAGE BATHTUB EQUIPPED WITH A
HEATER.
WARNING:RISK OF HYPERTHERMIA AND POSSIBLE DROWNING: DO
NOT USE A HYDROMASSAGE BATHTUB EQUIPPED WITH A
HEATER IMMEDIATELY FOLLOWING STRENUOUS ExERCISE.
SAVE THESE INSTRUCTIONS .
Installation and Operation
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Operational Safety Instructions
WARNING:
RISK OF HYPERTHERMIA AND POSSIBLE DROWNING!
Do not use a hydromassage bathtub equipped with a heater
immediately following strenuous exercise.
WARNING:
RISK OF ELECTRICAL SHOCK!
Do not operate hydromassage system unless the bath is
•
filled with water to at least 1-2˝ (25-51 mm) above the highest
jet.
Do not immerse the control panel by overfilling the bath.
•
When cleaning your bath, do not use abrasive substances
•
which will damage the bath’s surface.
To prevent discoloration of the acrylic finish, do not fill the
•
bath with water in excess of 140°F (60°C).
WARNING:
PROLONGED IMMERSION IN HOT WATER MAY INDUCE
HYPERTHERMIA!
Hyperthermia occurs when the internal temperature of the body
reaches a level several degrees above the normal body
temperature of 98.6°F (37°C). The symptoms of hyperthermia
include an increase in the internal temperature of the body,
dizziness, lethargy, drowsiness and fainting. The effects of
hyperthermia include:
A.
B.
C.
D.
E.
F.
Failure to perceive heat.
Failure to recognize the need to exit the bath.
Unawareness of impending hazard.
Fetal damage in pregnant women.
Physical inability to exit the bath.
Unconsciousness resulting in danger of drowning.
WARNING:
WARNING:
RISK OF FETAL INJURY!
Pregnant or possibly pregnant women should consult a
physician before using a hydromassage bathtub equipped with
a heater.
Keep body and hair a minimum of 6˝ (152mm) away from the
suction fitting at all times when the hydromassage system is in
operation. Hair longer than shoulder length should be secured
close to the head.
Page 6
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Operational Safety Instructions (Cont)
WARNING:
The use of alcohol, drugs or medication can greatly increase
the risk of fatal hyperthermia. People using medications or
having an adverse medical history should consult a physician
before using a hydromassage bathtub equipped with a heater.
WARNING:
WARNING:
Do not tamper with user-operated controls or such devices.
Use this unit only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturers.
WARNING:
WARNING:
To avoid injury, exercise caution when entering or exiting the
hydromassage bathtub.
Do not use hydromassage bathtub unless all suction guards
are installed to prevent body and hair entrapment. Never
operate the hydromassage bath if the suction cover is broken,
damaged or missing.
WARNING:
CAUTION:
Water temperature in excess of 104°F (40°C) may be injurious
to your health. Check and adjust water temperature before use.
Test the ground fault circuit interrupter protecting this appliance
periodically in accordance with manufacturer’s instructions.
IMPORTANT:
IMPORTANT:
Read the complete instructions provided in this manual before
beginning installation.
For optimal operation, the water level must remain at 1˝ to 2˝
(25mm to 50mm) above the highest jet; do not use oil-based
bathtub additives in your hydromassage bathtub.
The Company has obtained applicable code (standards) listings generally available
on a national basis for products of this type. It is the responsibility of the
installer/owner to determine specific local code compliance prior to installation of the
product. The Company makes no representation or warranty regarding, and will not
be responsible for any code compliance. Product specifications are subject to
change without notice.
Installation and Operation
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Inspection and Testing
Visual Inspection
Remove the bathtub from the shipping carton. Be careful not to scratch the surface of the bathtub on exposed
staples. Remove the staples or fold them into the carton. Retain the carton until satisfactory inspection of the
product has been made. Do not lift the bathtub by the plumbing at any time; handle by the shell only.
1
Inspect the shell and bathtub components. Should inspection reveal any damage or defect in the finish or visible
damage to any components, do not install the bathtub. Damage or defect to the finish claimed after the bathtub
is installed is excluded from the warranty. Jacuzzi Luxury Bath’s responsibility for shipping damage ceases upon
delivery of the products in good order to the carrier.
2
Refer any claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the
published warranty information packed with the product or in the back of this manual.
3
Bathtub Water and Operational Test
All bathtub units are factory tested for proper operation and watertight connections prior to shipping. However, the unit
must be retested by the installer prior to installation. Jacuzzi Luxury Bath is not responsible for any defect that could
have been discovered, repaired, or avoided by following this inspection and testing procedure:
Place the bathtub on a level surface, near appropriate electrical supply, water supply, and water drainage. A
driveway is a suitable choice.
1
Seal the drain and overflow hole with tape or a stopper and fill the bathtub to the bottom of the overflow hole.
Allow bathtub to stand for 5 minutes.
2
3
4
Plug in motor/pump and turn unit on. Confirm that all features function as described in the Operation section of
this manual. Do not install the bathtub if bathtub fails to operate as described.
Visually inspect all joints for leaks. Do not install the bathtub if leaks are detected.
Return bathtub to box or otherwise protect from damage until time of installation.
5
6
Framing and Support
A technical specifications manual has been included with your bathtub. The Technical Specifications Manual will
contain pertinent information regarding your Jacuzzi Luxury Bath product. Locate the Technical Specifications Manual
at this time.
Common Access Locations
Frame out the space where the bathtub is to be located. The following
should be taken into consideration when preparing the area:
Dimensions provided on rough-in diagrams are nominal. Measure your
•
actual unit upon receipt and build according to the actual dimensions.
The floor structure beneath the bathtub must be able to support the
•
total weight of the bathtub, water and bather.
The unit must be supported from the bottom of the bathtub and not
•
from the bathtub rim. For drop-in installations, take into account the
thickness of the surround material and finishing material (marble, tile,
etc.).
The rim of the bath is not designed to support weight. If finish material
•
is to overlap or contact the bath, the added weight must be fully
self-supporting.
Ensure the rim will rest on a level surface.
•
Per code, access must be provided to the motor/pump for your specific
•
model. Primary and secondary service access locations are shown in
the rough-in diagrams contained in the Technical Specifications
section.
Figure 1
It is the responsibility of the installer, building contractor, or owner to provide access for service. Jacuzzi is
not responsible for any costs relating to obtaining access for repair. The owner shall bear such costs and, if
appropriate, must seek recovery from the installer.
Provide adequate ventilation for cooling and supply sufficient air for the motor/pump. Do not insulate
•
•
around the equipment.
Your bathtub may have motor/pump parts that extend beyond the rim of the bathtub. Refer to the rough-in
diagrams included in the warranty pack and construction framing to correctly accommodate.
Page 8
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Subfloor
Prepare the subfloor for the drain and ensure that the area is level.
The drain/overflow of the bathtub extends below the bottom of the bathtub. Identify the drawing in the Technical
Specifications Manual that corresponds with your bathtub.
1
Make appropriate cuts to the subfloor to accommodate the drain.
2
3
Jacuzzi’s Tru-Level™ base is a standard feature on all bathtubs. If the subfloor is level and a continuous surface,
no other preparation is necessary. Proceed to the “Installation” section.
If the subfloor is not level, you must level the entire surface prior to installing the bathtub. The materials used
will insure that the bathtub is supported from the bottom. These materials include: leveling compound, mortar,
plaster or minimal expansion structural foam (having a density of a minimum 5lbs/cubic foot). The bathtub must
remain level in order for it to drain properly and must make contact with the leveling material. Both sides of a joint
or splice of subfloor should be level to each other.
4
Electrical Connections
Risk of electric shock. Connect only to a circuit protected by a GFCI.
When using electrical products, basic precautions should always be followed:
Always follow local building and electrical codes.
•
Grounding is required. The unit should be installed and grounded by a qualified electrician.
•
Two separate GFCI protected circuits are required.
A separate, 120VAC, 15 AMP GFCI circuit is required for the pump/motor.
A separate 120VAC, 15AMP, GFCI protected circuit is required for the heater.
Risk of component overheat. Do not use electric extension cord to power this unit.
Operating the motor/pump without enough water in the bathtub can cause permanent damage to the pump.
Pump/Motor with Heater
Electrical outlets must be mounted 4˝ (101mm)
above the floor line, or in accordance with local
building and electrical codes.
-
-
The pump/motor and heater require a dedicated
120VAC, 15 Amp GFCI protected circuit for each.
The electrical outlets are not provided.
Power cord from the pump/motor is routed to a
control box t the factory. A supplied power cord
from the control box with a 120VAC, 15 AMP plug
connects to the customer-supplied GFCI protected
circuit.
4˝
(101mm)
-
-
Bonding lugs are provided on the motor to satisfy
local electrical codes.
At initial start-up, test GFCI units for proper
operation. Follow the manufacturer’s direction for
testing and proper use.
Figure 2
If the GFCI units indicate a malfunction, per manufacturer’s instructions, turn OFF power and do not use the
bathtub until the source of the problem has been identified and corrected.
Installation and Operation
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
J2 Control Panel Schematic Diagram
Reference Illustrations
These illustrations are for reference only, as the unit
comes fully assembled.
120VAC 15A GFCI
Risk of electric shock. Before servicing these
connections, disconnect all power supply cables to
both 120VAC services.
PUMP/MOTOR
CONTROL PANEL
CONTROL BOX
CHROMATHERAPY
LIGHT
Figure 3
CANADIAN MODELS ONLY:
The components must be hardwired in the J-Boxes (supplied) that are located on the unit.
Page 10
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Drop-in Installation
Before you begin your installation, please read the following:
Observe all local and building codes.
•
•
•
•
Determine which tools will be used during the installation.
Additional bathtub drain parts and plumbing are commercially available at plumbing and hardware stores.
Drain/Overflow rough-in information is included with your bathtub in the installation instruction manual.
Tile
Complete the bathtub surround installation.
Subfloor
Install drain/overflow according to the manufacturer’s
instructions. Refer also to the Technical
Specifications Manual.
1
Sealant
Watertight installation of the drain is the installer’s
responsibility. Drain leakage is excluded from the
Jacuzzi Luxury Bath warranty of this product.
Mortar or
Adhesive
Flashing
Install the faucet at this time. It is recommended that
the faucet be installed by a qualified plumber.
2
1˝ x 4˝
(25mm x 101mm)
Not For Support
Exploded View
Proper installation of the spout plumbing and
compliance with local codes are the responsibility of
the installer. Jacuzzi Luxury Bath does not warrant
connections of water supply fittings and piping,
fill systems, or drain/overflow systems. Nor is it
responsible for damage to the bathtub which may
occur during installation.
Figure 4
A non-flammable protective barrier must be placed
between the soldering work and the bathtub unit to
prevent damage to the bathtub.
Prepare the cut-out hole for the bathtub using either
the provided template or the cutout dimensions
listed in the specifications table in the Technical
Specifications Manual.
3
Motor/Pump
The template may show guides for more than one
bathtub, be certain to select the appropriate guide
lines. If under mounting is an option, be careful to
select the guide lines that apply to the installation
that you are performing.
Scrap Lumber
Tile or Finished
Surface
Support Member
Complete all deck finish work. Cover to protect from
damaging while placing the bathtub.
4
5
Figure 5
Insulation may be placed within the bathtub
surround.
Provide adequate ventilation around the motor/
pump to ensure sufficient airflow and cooling.
Turn off power supply to dedicated GFCI protected
circuits.
6
7
Place a piece of scrap lumber on each of the ends
of the cutout – this will be used as a temporary
support prior to lowering the bathtub fully into the
opening.
Motor/Pump
Connect flex water supply lines to faucet and plug
power cords into GFCI outlets.
8
9
DO NOT use plumbing fixtures or lines to lower the
unit. Allow the bathtub to rest on the supports.
Tile or Finished
Surface
Install the unit, inserting the motor/pump end first,
lowering the bathtub into the opening as shown in
the illustration.
Level Subfloor
Support Member
Figure 6
Installation and Operation
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Drop-in Installation (con’t)
Inspect all fittings, plumbing, and control lines
10
after inserting to insure the components are not
damaged, disconnected, or contacting the finish
surface substrate or support members.
Align the bathtub and connect the drain.
11
12
Turn on the power supply to the dedicated GFCI
protected circuits and check system operation.
Caulk around the perimeter of bathtub to seal the
space between the rim and the finished deck.
13
Figure 7
3-Wall Alcove Installation
Install the drain/overflow according to the
manufacturer’s instructions. Refer also to the
Technical Specifications Manual.
1
Cement Board
Mortar
Finishing
Material
Watertight installation of the drain is the installer’s
responsibility. Drain leakage is excluded from the
Jacuzzi Luxury Bath warranty of this product.
Plastic Filler
Silicon/Sealant
Bath Rim
Screw
Install the faucet at this time. It is recommended that
the faucet be installed by a qualified plumber.
Tile Flange
2
Install the flange (purchased separately) according
3
to the instructions that are included with the kit. If the
bathtub is equipped with an integrated flange, skip this
step.
Stud Wall
1˝ x 4˝ (not for
support)
Turn off the power supply to the GFCI protected
circuit.
4
Figure 8
Insulation may be placed within the bathtub surround,
except around the motor/pump.
5
6
7
Connect flex water supply lines to faucet and plug
power cords into GFCI outlet.
Tile
Place the bathtub into the niche. Screw the flange to
the wood stud. It may be necessary to shim the unit
to close up any gaps between the wood stud and the
flange.
Stud Wall
Cement Board
Tile Adhesive
Align the bathtub and connect the drain.
8
9
Inspect all fittings, plumbing, and control lines after
inserting the bathtub to insure the components are
not damaged, disconnected, or contacting the finish
surface substrate or support members.
Caulking
Mounting
Screw
Tile Flange
Stud
Turn on the power supply to the dedicated GFCI
protected circuits and check system operation.
10
11
1˝ x 4˝
(not for
support)
Complete all finish work around the perimeter of
bathtub to seal the space between the rim and the
finished deck.
Figure 9
Page 12
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Skirt Installation
Bathtubs with an Integral Skirt
Screw skirt flanges into wall studs.
Finishing
Materials
1
Green Board
It may be necessary to shim the unit to close any
gaps between wall studs and the flanges.
Caulking Bead
Rim of Bathtub
Complete finish work over skirt flange.
2
3
Stud
Caulk around the perimeter of the skirt to seal the
space between the skirt and the finished deck.
Skirt Panel
Floor
Bathtubs with Optional Skirt
If you are installing a integral skirt, please refer to the Skirt
Installation Guide before proceeding any further. Complete
the installation and assembly steps according to the Skirt
Installation Guide.
Figure 10
Undermount Installation
Install drain/overflow according to the manufacturer’s
instructions.
1
Template
Watertight installation of the drain is the installer’s
responsibility. Drain leakage is excluded from the Jacuzzi
Luxury Bath warranty of this product.
Bathtub Rim
Turn off power supply to dedicated GFCI protected
circuits.
2
3
4
Install the unit in desired location. DO NOT use plumbing
fixtures or lines to carry or lower the unit.
Figure 11
Inspect all fittings, plumbing, and control lines after
inserting to insure the components are not damaged or
disconnected.
B
A
C
Align the bathtub and connect the drain.
5
6
Insulation may be placed within the bathtub surround.
Provide adequate ventilation around the motor/pump to
ensure sufficient air flow and cooling.
Cut deck/counter to fit using the undermount template
provided as follows:
7
D
Position the template so that the desired undermount
guidelines are aligned with the rim edge as shown.
Using a grease pencil, mark the center lines (denoted
by on template). Remove template.
Measure the distance from the wall, or other fixed point,
to the center lines.
•
•
•
Counter
Template
Figure 12
Affix counter to bathtub. Clean any dirt or debris from the top of the bathtub rim. Apply a bead of silicone sealant
around the entire rim of bathtub.
8
Do not use an adhesive or adhesive sealant to secure the counter to the bathtub. If maintenance or remodeling
is required, the counter may have to be removed. Adhesive will permanently bond the counter to the bathtub.
Carefully position the deck/counter over the bathtub. Follow manufacturer’s instructions to determine cure time.
Apply a continuous bead of silicone sealant around the entire seam between the counter and the bathtub rim.
Allow sealant to cure according to manufacturer’s instructions.
9
Turn on the power supply to the dedicated GFCI protected circuits and check system operation.
10
Installation and Operation
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Cleanup
To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a
mild liquid detergent and warm water is sufficient. The following is also recommended:
Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed
•
with detergent on a damp cloth or sponge. Do not use metal scrapers, wire brushes or other metal tools, as they
will damage the bathtub’s surface.
Paint, tar, or other difficult stains can be removed with Fantastik® or soapy water.
Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry
•
•
sandpaper. You can restore the glossy finish to the acrylic surface of the bathtub with a special compound,
Meguiar’s #10 Mirror Glaze. If that is not available, use automotive rubbing compound followed by an application
of automotive paste wax.
Major scratches and gouges which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath
to find a service agent in your area.
•
General Operation Information
All bathtubs manufactured by Jacuzzi Luxury Bath are
designed for “fill and drain,” which means the bathtub
should be drained after each use and filled with fresh
water by the next bather. This is a health precaution,
as these bathtubs are not designed to hold water
continuously like pools or spas.
Fill to at least 1˝ to 2˝
above highest jet
Close the drain and fill the bathtub until water is at
least 1˝ to 2˝ (25mm to 51mm) above the highest jet
(see water line indicated in the illustration). Do not turn
on the whirlpool system at any time if the jets are not
completely immersed in water. Running the whirlpool
system when there is insufficient water in the bathtub
could result in water spraying outside the bath area.
Running the whirlpool system without water will damage
the recirculating pump.
Figure 13
When exiting the bathtub, the water level will drop below the jets which could result in water being sprayed out of
the unit. To prevent this, you must turn unit OFF before exiting bathtub.
Whirlpool Operation
ON: Press the jet button once to turn the whirlpool jets ON.
G
OFF: Press the jet button a second time to turn the
whirlpool jets OFF.
Chromatherapy (Light) Operation
Press light button 1st time:
Turns colored lighting ON, use up and down buttons to start
color scroll or select alternate color.
Press light button 2nd time:
Turns white lighting ON, use up and down buttons to select
intensity of white light.
Press light button 3rd time:
Turns all lighting OFF
Page 14
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Chromatherapy (Light) Operation (Cont)
Colored Lighting Operation
The colored lighting default is constant blue. Pressing the ( ) button activates color scroll in this order: blue, teal,
green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected color,
press the ( ) button again. Pressing the ( ) button activates color scroll in this order: blue, purple, pink, red, orange,
yellow, green, teal and then returns to blue and continuously repeats. To stop on a selected color, press the ( ) button
again.
White Lighting Operation
There are five white light intensities. Press the ( ) button to increase light intensity. Press the ( ) button to decrease
light intensity.
Air Flow (if equipped)
Turn the dial clockwise to reduce
the air flow
Turn the dial counter-clockwise to increase the
air flow clockwise to reduce the air flow
Turn the left air valve dial to active the left air valves.
Turn the right air valve dial to activate the right air
valves.
The amount of air induced into the whirlpool jets can be
controlled from maximum to none.
Figure 14
Controlling Whirlpool Direction and Flow
Direction -
All Jacuzzi jets, except the rotating neck jets, can be directionally
adjusted. To change the direction of the water flow, swivel the jet
nozzle to the desired angle. The jets can be directed individually
toward any location on your body to provide a hydromassage.
The jets can also be adjusted so that they all point in the same
direction (clockwise or counterclockwise) to circulate the water in
a circular motion around the bath, causing a total whirlpool effect.
Water Force -
Most Jacuzzi jets are designed for flow adjustment. For robust
action, increase the force of the flow by rotating the nozzle, or
face, to the left (counterclockwise). For a more gentle effect, or to
close off the jet, rotate the nozzle, or face, to the right (clockwise).
Multidirectional Jets
Closing one or more jets can increase the water force in the
remaining jets.
The rotating neck jets, and some AccuPro™ jets, cannot be
adjusted for water force.
Never run the whirlpool system with all the jets closed.
Figure 15
Purging the Whirlpool System
To remove accumulations of bathtub residue from the whirlpool system, it is recommended that a whirlpool bathtub be
cleaned at least twice a month. For best results, however, we recommend that you clean your whirlpool bathtub after
each use using, Systems Clean™, our exclusive two-part plumbing system cleaner made specifically for whirlpool
bathtubs. Systems Clean™ is available through an authorized Jacuzzi Whirlpool Bath Distributor or by calling us direct
at 1-800-288-4002.
Installation and Operation
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Bathtub Additives
Do not use oil or oil-based bathtub additives.
If you want to use any kind of bathtub additive, use only a small amount of low-foaming powder or crystal substance;
the whirlpool action intensifies the foaming properties of soaps.
The use of certain bathtub oils, bubble baths, and bathtub additives may increase the level of accumulations of bathtub
residue in the whirlpool system and may cause false reading of the water level sensors. If excess accumulations
persist, you should discontinue use of these products.
Maintenance
To clean your bathtub, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss
to a dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specifically designed for use on acrylic
finishes. If Meguiar’s is not available, use a fine grade automotive rubbing compound followed by an application of
automotive paste wax.
Never use abrasive household cleaners on any Jacuzzi Luxury Bath product.
Surface Repair
Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry
sandpaper. Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax. Major scratches and gouges
which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath to find a service agent in your area.
RapidHeat™
The heater turns ON automatically any time whirlpool operation is active. Heater operation is not displayed on the
control panel. There is a visible indicator light on the heater itself that signifies the heater is operating. The heater will
help maintain the temperature of the water in the bathtub.
Vacuum Switch
The heater is equipped with a preset vacuum switch which will not allow the heater to turn ON if the pump is not
running and water is not flowing through the whirlpool system.
High-Limit Switch
The heater includes an exclusive High-Limit switch. This
safety circuit will not false trip from hot tap water. It will
only turn OFF the heater if the thermostat fails. To reset,
press the button. If the high-limit trips frequently, please
Heater
On
High Limit
Reset
HEATER ON
OVER HEAT
PROTECTION
PUSH TO RESET
Figure 16
Page 16
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Suction Cover/Strainer Maintenance
Suction Fitting
Clean the suction cover/strainer of hair and debris when
necessary.
Suction Cover
Remove the center screw and detach the suction
cover.
1
Clean the cover by backflushing debris from the holes.
Replace the suction cover immediately after cleaning.
2
3
When reinstalling, orient the cover/strainer with the
small notch at the bottom. The gasket must be inserted
into the groove of the cover/strainer before reinstalling
onto the suction fitting.
Keep hair a minimum of 6 inches (152 mm) away
from the suction fitting at all times when the whirlpool
system is operating. Hair longer than shoulder length
should be secured close to the head, or a bathing cap
should be worn.
Screw
Gasket
Notch
Do not operate the whirlpool system with the suction
cover/strainer removed!
Figure 17
It is a safety device and must always be in place on the suction fitting to minimize the potential hazard of hair and
body entrapment.
Troubleshooting Procedures
PROBLEM
PROBABLE CAUSES
REMEDY
No power to pump/motor
Pump/motor not plugged in
Reset GFCI
Insert plug securely into outlet
Pump/motor does not start
Ensure the control panel is conencted to control box
Contact Jacuzzi Luxury Bath @ 800-288-4002
Pump/motor faulty
Pump/motor operates but no fully adjustable jets are
functioning
Jets are closed
Open jets by rotating counter-clockwise
Suction cover/strainer may be clogged
Air valves are closed
With the motor turned OFF, remove the suction cover/
strainer and remove any debris. Replace the suction
cover before operating
Pump/motor operates but air is not injected into the
water
Open air control valves
Water leakage from pump unions
Overtightened, O-ring may be pinched or improperly
seated, undertightened
Loosen unions , check and reseat O-ring. If O-ring has
been pinched out of shape, replace (refer to number
below). When tightening union nuts, handtighten only.
Pump/motor shuts off by itself before time elapses
Motor thermal protection has deactivated pump/motor
due to overheating (supply voltage low)
Let motor cool; thermal protection will reset. Check for
proper ventilation (check supply voltage)
GFCI tripped
Reset GFCI. If it continues to trip, do not use this unit.
Disconnect the unit and have the problem corrected by
a licensed electrician before using.
Inadequate supply wiring
Connector has come loose
Consult a licensed electrician to correct the wiring unit.
Contact Jacuzzi Luxury Bath @ 800-288-4002
Chromatherapy lights do not operate
Water not maintaining temperature
High Limit switch on heater has been tripped
Press Reset button on heater
If the unit is within the warranty period, contact Jacuzzi Whirlpool Bath Service Support at 1-800-288-4002 with your bath’s serial number
before work is started. The serial number is located on the Specification/Serial Number Plate (the plate is located behind the equipment area).
Installation and Operation
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Technical Specifications
Rectangular Baths
L
W
END VIEW
H
2"
(Heater)
(51 mm)
H
(Motor)
A
SIDE VIEW
L
B
(25 mm)
1"
W
DRAIN/OVERFLOW
(Heater)
(Motor)
END VIEW
SIDE VIEW
SPECIFICATIONS (Rectangular)
LH=Left Hand MTR, RH=Right Hand MTR, LBM=Left Back MTR, LFM=Left Front MTR, RBM=Right Back MTR, RFM= Right Front MTR
DRAIN/OVERFLOW
DIMENSIONS
TOTAL WEIGHT/
FLOOR LOADING GALLONAGE
OPERATING
PRODUCT
WEIGHT
SKIRT &
MOUNTING
HEATER
CUTOUT
MODEL
AMIGA™ PLUS
DIMENSIONS
16-7/8" (429 mm) A
70" x 34"
(1778mm x
864mm)
772 lb
(351 kg)/
49.2 lb/ft2
(210 kg/m2)
105 lb
(48 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
Min. 54 U.S. gal
(204 liters)
Max. 72 U.S. gal
(273 liters)
72"
36"
(1829 mm) L*
14"
(356 mm) B
( 914 mm) W
LH, RH, RBM, RFM,
LBM, LFM
20-¾" ( 533 mm) H
CETRA© 532 PLUS
LH, RH
18-½" (470 mm) A
58" x 30"
(1473mm x
762mm)
697 lb
(317 kg)/
52.5 lb/ft2
(256 kg/m2)
89 lb
(40.5 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
Min. 40 U.S. gal
(151 liters)
Max. 62 U.S. gal
(235 liters)
60"
32"
(1524 mm) L*
9"
(229 mm) B
( 813 mm) W
21-¼" ( 553 mm) H
CETRA© 536 PLUS
LH, RH
18-½" ( 470 mm) A
58" x 34"
(1473mm x
864mm)
742 lb
(337 kg)/
49.5 lb/ft2
(241 kg/m2)
Min. 41 U.S. gal
(155 liters)
Max. 55 U.S. gal
(208 liters)
92 lb
(42 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
60"
36"
(1524 mm) L*
9"
( 229 mm) B
( 914 mm) W
21-¼" ( 553 mm) H
CETRA© 536 PLUS
WITH INTEGRAL
SKIRT
18-½" ( 470 mm) A
NA
NA
742 lb
(337 kg)/
49.5 lb/ft2
(241 kg/m2)
Min. 41 U.S. gal
(155 liters)
Max. 55 U.S. gal
(208 liters)
92 lb
(42 kg)
Integral
Integral
Factory Installed
(S750000 HEATER KIT)
60"
36"
(1524 mm) L*
9"
( 229 mm) B
( 914 mm) W
21-¼" ( 553 mm) H
LH, RH
60"
32"
(1524 mm) L* 15-¼" (387 mm) A
(813 mm) W 8-¼" (210 mm) B
707 lb
Min. 39 U.S. gal
(148 liters)
Max. 50 U.S. gal
(189 liters)
117 lb
(53 kg)
Factory Installed
(S750000 HEATER KIT)
LUXURA™ PLUS
WITH INTEGRAL
SKIRT
(321.4 kg)/
52.5 lb/ft2
(256 kg/m2)
20-¼" ( 514 mm) H
LH, RH
MITO© 5 PLUS
60"
42"
21"
(1524 mm) L* 17-½" (445 mm) A
(1067 mm) W 11-⅞" (302 mm) B
( 533 mm) H
58" x 40"
(1778mm x
1016mm)
866 lb
Min. 39 U.S. gal
(148 liters)
Max. 73 U.S. gal
(276 liters)
109 lb
(49.5 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
(321.4 kg)/
49.5 lb/ft2
(256 kg/m2)
LH, RH
MITO© 6 PLUS
LH, RH
72"
42"
(1829 mm) L 17-½" (445 mm) A
(1067 mm) W 11-⅞" (302 mm) B
70" x 40"
(1778mm x
1016mm)
993 lb
(451 kg)/
47.3 lb/ft2
(230 kg/m2)
Min. 39 U.S. gal
(148 liters)
Max. 73 U.S. gal
(276 liters)
155 lb
(70.5 kg)
Not
Available
Factory Installed
(S750000 HEATER KIT)
21-½" ( 546 mm) H
NOVA© 5 PLUS
LH, RH
60"
42"
(1524 mm) L* 14-¾" (375 mm) A
(1067 mm) W 8-½" (216 mm) B
58" x 40"
(1473mm x
1016mm)
781 lb
Min. 35 U.S. gal
(133 liters)
Max. 52 U.S. gal
(197 liters)
110 lb
(50 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
(355 kg )/
44.2 lb/ft2
(215 kg/m2)
18-½" ( 470 mm) H
NOVA© 6 PLUS
LH, RH
72"
42"
(1829 mm) L* 14-¾" (375 mm) A
(1067 mm) W 8-½" (216 mm) B
70" x 40"
(1778mm x
1016mm)
1155 lb
(525 kg)/
55 lb/ft2
Min. 57 U.S. gal
(216 liters)
Max. 82 U.S. gal
(310 liters)
116 lb
(53 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
20-½" ( 521 mm) H
(268 kg/m2)
SIGNA© 5 PLUS
LH, RH
17-½" (445 mm) A
12-½" (318 mm) B
58" x 40"
(1473mm x
1016mm)
708 lb
(321 kg)/
40 lb/ft2
42 U.S. gal
(159 liters)
108 lb
(49 kg)
Optional,
U-Frame
Factory Installed
(S750000 HEATER KIT)
60"
42"
22"
(1524 mm) L*
(1067 mm) W
( 559 mm) H
(195 kg/m2)
SIGNA© 6 PLUS
LH, RH
16-⅞" (429 mm) A
826 lb
(375 kg)/
39 lb/ft2
55 U.S. gal
(208 liters)
70" x 40"
(1778mm x
1016mm)
118 lb
(54 kg)
Not
Available
Factory Installed
(S750000 HEATER KIT)
72"
42"
22"
(1829 mm) L*
(1067 mm) W
( 559 mm) H
14"
(356 mm) B
(190 kg/m2)
*Add ¼" (6mm) to this dimension when roughing-in for 3-wall niche.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
RapidHeatTM: 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 Amp, 60 Hz. dedicated GFCI protected separate circuit.
Page 18
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Oval Baths
L
W
2"
(51 mm)
(Heater)
H
A
(Motor)
SIDE VIEW
END VIEW
B
LUNA PLUS
DRAIN/OVERFLOW
66"
38"
43"
62"
2"
(51 mm)
19"
2"
(Heater)
(Heater)
19 1/2"
(51 mm)
(Motor)
SIDE VIEW
W
END VIEW
END VIEW
SIDE VIEW
42"
RIVA® 5.5 PLUS
RIVA® 5.5 PLUS
72"
L
20-1/2"
(51 mm)
(Heater)
2"
(50.8 mm)
2"
(Heater)
H
(Motor)
(Motor)
END VIEW
SIDE VIEW
END VIEW
SIDE VIEW
GALLERY™ 5 PLUS, GALLERY™ 6 PLUS
RIVA® 6 PLUS, Left Hand
SPECIFICATIONS (Oval) LH=Left Hand, RH=Right Hand
SKIRT &
MOUNTING
PRODUCT
WEIGHT
DRAIN/OVERFLOW
DIMENSIONS
TOTAL WEIGHT/
FLOOR LOADING
OPERATING
GALLONAGE
HEATER
DIMENSIONS
MODEL
GALLERY™ 5 PLUS
LH, RH
CUTOUT
62"
43"
19"
(1575 mm) L
(1092 mm) W 9-½" (241 mm) B
( 543 mm) H
14-¾" (375 mm) A
Template
Provided
P/N
746 lb
(339 kg)/
40.3 lb/ft2
(196 kg/m2)
48 U.S. gal
(182 liters)
96 lb
(44 kg)
Not Available
Not Available
Not Available
Factory Installed
(S750000 HEATER KIT)
P186000
72"
42"
(1829 mm) L
(1118 mm) W 11-½" (292 mm) B
16"
(406 mm) A
Template
Provided
P/N
871 lb
(396 kg)/
41.5 lb/ft2
(202 kg/m2)
62 U.S. gal
(235 liters)
105 lb
(48 kg)
Factory Installed
(S750000 HEATER KIT)
GALLERY™ 6 PLUS
LH, RH
20-½" ( 521 mm) H
P186000
Min. 89 U.S. gal
(337 liters)
Max. 103 U.S. gal
(390 liters)
LUNA™ PLUS
LH, RH
72"
42"
23"
(1829 mm) L
(1118 mm) W 11"
( 584 mm) H
19-⅛" (486 mm) A
Template
Provided
P/N
1176 lb
(535 kg)/
56 lb/ft2
126 lb
(57 kg)
Factory Installed
(S750000 HEATER KIT)
(279 mm) B
P819000
(273 kg/m2)
Min. 40 U.S. gal
(151 liters)
Max. 58 U.S. gal
(220 liters)
RIVA™ 5 PLUS
LH, RH
62"
43"
19"
(1575 mm) L* 14-¾" (375 mm) A
(1092 mm) W 9-½" (241 mm) B
( 483 mm) H
Template
Provided
P/N
779 lb
96 lb
(44 kg)
Not Available
Not Available
Factory Installed
(S750000 HEATER KIT)
(354 kg) /
44.2 lb/ft2
(215 kg/m2)
P186000
44 gal Min
(166 Lt)
56 gal Max
(211 Lt)
RIVA™ 5.5 PLUS
LH, RH
66"
38"
(1676 mm) L 14-¾" (375 mm) A
Template
760 lb (344 kg)/
93 lb
(42 kg)
Factory Installed
(S750000 HEATER KIT)
(965 mm) W 9-½"
(241 mm) B
Provided 55 lb/ft2 (29 kg/m2)
19-½" (495 mm) H
P/N
Fx40000
Min. 58 U.S. gal
(220 liters)
Max. 89 U.S. gal
(337 liters)
RIVA™ 6 PLUS
LH, RH
72"
42"
(1829 mm) L* 16"
(1067 mm) W 11-½" (292 mm) B
(406 mm) A
Template
Provided
P/N
1150 lb
(575 kg)/
55 lb/ft2
111 lb
(50.5 kg)
Not Available
Factory Installed
(S750000 HEATER KIT)
20-½" ( 521 mm) H
P186000
(268 kg/m2)
*Add ¼" (6mm) to this dimension when roughing-in for 3-wall niche.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
RapidHeatTM: 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 Amp, 60 Hz. dedicated GFCI protected separate circuit.
Installation and Operation
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Corner Baths
2”
(Motor)
1"
H
(50,8 mm)
H
(25 mm)
(Suction Heater)
END VIEW
SIDE VIEW
FRONT VIEW
SIDE VIEW
CAPELLA™ PLUS LEFT HAND MOTOR
CAPELLA 60 WITH INTEGRAL SKIRT
L
L
(Motor)
2”
2”
H
(Motor)
(51 mm)
H
(51 mm)
(Suction Heater)
SIDE VIEW
(Suction Heater)
END VIEW
END VIEW
SIDE VIEW
TARA™ PLUS Right-hand BACK MOTOR
TARA™ PLUS Left-Hand BACK MOTOR
L
(25,4 mm)
1”
2”
H
(Suction Heater)
SIDE VIEW
H
(51 mm)
(Suction Heater)
(Motor)
(Motor)
END VIEW
END VIEW
SIDE VIEW
TARA™PLUS LEFT HAND MOTOR
TARA™PLUS with Skirt RIGHT HAND MOTOR
A
B
DRAIN/OVERFLOW
SPECIFICATIONS (Corner) LH=Left Hand MTR, RH=Right Hand MTR, LBM=Left Back MTR, RFM=Right Front MTR,
RBM=Right Back MTR
SKIRT &
MOUNTING
DRAIN/OVERFLOW
DIMENSIONS
TOTAL WEIGHT/ OPERATING PRODUCT
CUTOUT FLOOR LOADING GALLONAGE WEIGHT
HEATER
DIMENSIONS
MODEL
Min 55 U.S. gal
(208 liters)
Max 90 U.S. gal
(341 liters)
CAPELLA™ PLUS
60"
60"
(1524 mm) L
(1524 mm) L
18"
(406 mm) A
See
Page 12
1177 lb
(535 kg)/
130 lb
(59 kg)
Optional
Integral
Factory Installed
(S750000 HEATER KIT)
12-⅛" (314 mm) B
LH, RH
20-½" ( 521 mm) H
47.1 lb/ft2
(229 kg/m2)
Min 55 U.S. gal
(208 liters)
Max 90 U.S. gal
(341 liters)
CAPELLA™ PLUS
WITH INTEGRAL
SKIRT
60"
60"
(1524 mm) L
(1524 mm) L
18"
(406 mm) A
NA
1038 lb
(472 kg)/
140 lb
(64 kg)
Factory Installed
(S750000 HEATER KIT)
12-⅛" (314 mm) B
20-½" ( 521 mm) H
41.5 lb/ft2
(202 kg/m2)
RFM
TARA™ PLUS
60"
60"
(1524 mm) L
(1524 mm) L
16"
(406 mm) A
See
Pages
12-13
984 lb
(447 kg)/
39 lb/ft2
74 U.S. gal
(280 liters)
118 lb
(54 kg)
Optional
Integral
Factory Installed
(S750000 HEATER KIT)
12-⅜" (314 mm) B
LH, RH, LBM, RBM
20-¾" ( 527 mm) H
(190 kg/m2)
Min 61 U.S. gal
(231 liters)
Max 87 U.S. gal
(329 liters)
TARA™ PLUS WITH
INTEGRAL SKIRT
60"
60"
(1524 mm) L
(1524 mm) L
16"
(406 mm) A
NA
1160 lb
(527 kg)/
46.4 lb/ft2
(226 kg/m2)
135 lb
(61 kg)
Factory Installed
(S750000 HEATER KIT)
12-⅜" (314 mm) B
20-¾" ( 527 mm) H
RH
*Add ¼" (6mm) to this dimension when roughing-in for 3-wall niche.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
RapidHeatTM: 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 Amp, 60 Hz. dedicated GFCI protected separate circuit.
Page 20
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Roughing-In Reference - Rectangular
12" H x 18" L
Service Access
72''
72''
72''
Heater
Motor
Motor
18''
18''
18''
16'' x 4''*
16'' x 4''*
16'' x 4''*
36''
36''
36''
Motor
Heater
11-1/8''
11-1/8''
2''
Heater
12" H x 18" L
Service Access
Opt. Service
Access
2''
2''
14''
14'' (Right back motor Left-hand tub.)
14''
AMIGA™ PLUS, Left Hand
(Right front motor, Left-hand tub.)
AMIGA™ PLUS, Left Hand RBM
AMIGA™ PLUS, Left Hand RFM
12" H x 18"L
Service Access
72''
72''
72''
Heater
Motor
18''
18''
18''
16'' x 4''*
16'' x 4''*
16'' x 4''*
36''
36''
11-1/8''
36''
Motor
Heater
2''
2''
2''
Motor
11-1/8''
Opt. Service
Access
12" H x 18"L
Heater
14''
14''
14''
Service Access
(Left back motor right-hand tub.)
(Left front motor right-hand tub.)
AMIGA™ PLUS, Right Hand
AMIGA™ PLUS, Right Hand LBM
AMIGA™ PLUS, Right Hand LFM
*60"
*60"
*60"
17-3/8"
5-3/4"
12" x 4"
12" x 4"
12" x 4"
Motor
32"
16"
36"
36"
18"
Motor
Motor
Heater
Heater
Heater
5-3/4"
2"
2"
9"
5-3/4"
9"
2"
Opt. Service Access
Opt. Service
Access
9"
CETRA™ 536 WITH INTEGRAL SKIRT,
Left Hand
CETRA™ 536 PLUS, Left Hand
CETRA™ 532 PLUS, Left Hand
*60"
60"
*60"
17-3/8"
12" x 4"
12" x 4"
12" x 4"
32"
Motor
36"
36"
Motor
Heater
Motor
Heater
Heater
16"
18"
2"
5-3/4"
2"
5-3/4"
2"
Opt. Service Access
Opt. Service Access
9"
CETRA™ 536 PLUS, Right Hand
9"
9"
CETRA ™ 536 WITH INTEGRAL SKIRT,
CETRA™ 532 PLUS, Right Hand
Right Hand
*60"
*60"
8-1/4"
8-1/4"
15-3/8"
15-3/8"
Motor 12" x 5"
12" x 5"
Motor
Heater
32"
32"
Heater
2-1/2"
5-1/4"
2-1/2"
5-1/4"
2-1/2"
2-1/2"
LUXURA™ 5 WITH INTEGRAL SKIRT,
Left Hand
LUXURA™ 5 WITH INTEGRAL SKIRT,
Right Hand
*Add ¼˝ (6mm) to this dimension when roughing-in for 3-wall niche.
1.
2.
3.
4.
5.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
Service Access dimensions given are minimum. Service access is still required for units that do not have pre-installed Pump/Motor.
Measurements inside each unit represent cutout in floor to allow for drain/overflow.
All measurements are in inches. To convert to millimeters, multiply inches by 25.4.
Not all export units come with pre-installed Pump/Motor.
Installation and Operation
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Roughing-In Reference - Rectangular
Opt. Service
Access
Opt. Service
Access
*72"
*60"
*60"
42"
21"
10" x 4"
2"
10" x 4"
2"
Heater
Motor
11" x 4"
Heater
Motor
Motor
42"
Heater
42"
5-3/8''
2''
5-3/8"
36"
Opt. Service Access
30"
5-3/8"
8-1/2''
MITO™ 6 PLUS, Left Hand
MITO™ 5 PLUS, Left Hand
NOVA™ 5 PLUS, Left Hand
*60"
Opt. Service
Access
Opt. Service
Access
*60"
*72"
42"
21"
42"
10" x 4"
11" x 4"
Motor
10" x 4"
Heater
Heater
Motor
Motor
2"
Heater
2"
42"
5-3/8''
36"
5-3/8"
Opt. Service Access
5-3/8"
2''
30"
8-1/2''
MITO™ 6 PLUS, Right Hand
MITO™ 5 PLUS, Right Hand
NOVA™ 5 PLUS, Right Hand
*60"
*72"
*72"
21"
42"
18-1/2" x 5"
42"
14" x 4"
13" x 5"
42"
Motor
Motor
Motor
Heater
12"
11-1/4"
12-1/2"
Opt.
Service
Access
6-7/8"
8-1/2"
4-1/4"
5"
Opt.
Service
Access
36"
2"
Opt. Service Access
5"
30"
SIGNA™ 5, Left Hand
SIGNA™ 6, Left Hand
NOVA™ 6 PLUS, Left Hand
72"
60"
*72"
21"
14" x 4"
18-1/2" x 5"*
42"
5"
13" x 5"
Motor
42"
5"
42"
Motor
Motor
Heater
12-1/2"
12"
Opt.
Service
Access
11-1/4"
36"
Opt.
Service
Access
6-7/8"
8-1/2"
4-1/4"
2"
NOVA™ 6 PLUS, Right Hand
Opt. Service Access
30"
SIGNA® 6 PLUS
SIGNA® 5 PLUS
*Add ¼˝ (6mm) to this dimension when roughing-in for 3-wall niche.
1.
2.
3.
4.
5.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
Service Access dimensions given are minimum. Service access is still required for units that do not have pre-installed Pump/Motor.
Measurements inside each unit represent cutout in floor to allow for drain/overflow.
All measurements are in inches. To convert to millimeters, multiply inches by 25.4.
Not all export units come with pre-installed Pump/Motor.
Page 22
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Roughing-In Reference - Oval
72"
62"
21-1/2"
12" x 4"
21"
14" x 4"
Motor
43"
42"
Motor
Heater
Heater
5"
9-1/2"
12" H x 18"L
Service Access
6-7/8"
2"
11-1/2"
2"
12" H x 18" L
Service Access
GALLERY™ 6 PLUS, Left Hand
72"
GALLERY™ 5 PLUS, Left Hand
62"
21-1/2"
21"
14" x 4"
12" x 4"
Motor
43"
Motor
42"
Heater
Heater
5"
12" H x 18"L
Service Access
6-7/8"
2"
11-1/2"
9-1/2"
2"
12" H x 18" L
Service Access
GALLERY™ 6 PLUS, Right Hand
GALLERY™ 5 PLUS, Right Hand
72"
62"
72"
21-1/2"
21"
13" x 6"*
12" x 4"
14" x 4"
Motor
43"
Motor
Motor
42"
42"
Heater
Heater
Heater
3"
6-7/8"
11"
5"
2"
11-1/2"
RIVA™ 6 PLUS, Left Hand
12" H x 18" L
Service Access
12" H x 18" L
Service Access
9-1/2"
12" H x 18"L
Service Access
36"
2"
LUNA®PLUS, Left Hand
RIVA™ 5 PLUS, Left Hand
62"
72"
66"
21-1/2"
19"
13" x 6"*
14" x 4"
12" x 4"
Motor
Heater
43"
Motor
38"
42"
Motor
3"
Heater
11"
5"
2"
9-1/2"
12" H x 18"L
Service Access
12" H x 18" L
Service Access
9-1/2"
12" H x 18"L
Service Access
36"
2"
RIVA™ 5.5, Right Hand
LUNA®PLUS, Right Hand
RIVA™ 5 PLUS, Right Hand
*Add ¼˝ (6mm) to this dimension when roughing-in for 3-wall niche.
1.
2.
3.
4.
5.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
Service Access dimensions given are minimum. Service access is still required for units that do not have pre-installed Pump/Motor.
Measurements inside each unit represent cutout in floor to allow for drain/overflow.
All measurements are in inches. To convert to millimeters, multiply inches by 25.4.
Not all export units come with pre-installed Pump/Motor.
Installation and Operation
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Roughing-In Reference - Corner
33-1/2"
Opt.
Service
Access
60"
58"
(1473 mm)
58"
(1473 mm)
60"
Motor
Heater
59-1/8"
(1502 mm)
Ref.
Motor
Heater
Drain Cutout
Service
Access
14" X 4"
25-5/8"
(651 mm)
27"
27"
25-5/8"
(651 mm)
6"
34-15/16"
45-3/7"
(1162 mm)
46-5/8"
43-1/8"
CAPELLA™ 60 PLUS, Left Hand
CAPELLA™ 60 PLUS , Left Hand
CUTOUT
33-1/2"
Opt.
Service
Access
60"
60"
58"
58"
(1473 mm)
(1473 mm)
Motor
Motor
59-1/8"
(1502 mm)
Ref.
Heater
Heater
Drain Cutout
Service
Access
14" X 4"
27"
27"
34-15/16"
25-5/8"
(651 mm)
25-5/8"
(651 mm)
6"
46-5/8"
45-3/7"
(1162 mm)
43-1/8"
CAPELLA™ 60 PLUS, Right Hand
CAPELLA™ 60 PLUS, Right Hand
CUTOUT
60"
33-1/2"
60"
60"
60"
61-5/8"
Ref.
Motor
14" x 4"*
Heater
Heater
Motor
14" X 4"
27-1/4"
35"
27-1/4"
27"
27"
34-15/16"
35"
44"
6"
46"
46-5/8"
43-1/8"
- J-box
- 2" x 4" Stud
- Junction box
CAPELLA™ 60 PLUS with Integral Skirt,Right Hand
TARA™ PLUS with Integral Skirt,Right Hand
60"
12" H x 18"L
Service Access
60"
61-5/8"
Ref.
58"
58"
(1473 mm)
14" x 4"*
Heater (S)
(1473 mm)
Motor
59"
Ref.
Motor
27-1/4"
35"
46"
Opt. Service Access
- 2" x 4" Stud
TARA™PLUS LH
Heater
27-1/4"
Drain Cutout
25-1/2"
(648 mm)
35"
44"
25-1/2"
(648 mm)
45-9/16"
(1157 mm)
TARA™PLUS LH CUTOUT
Page 24
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Roughing-In Reference - Corner
60"
Service
Access
60"
61-5/8"
Ref.
58"
(1473 mm)
58"
(1473 mm)
14" x 4"*
Heater
Motor
59"
Ref.
Motor
27-1/4"
27-1/4"
Drain Cutout
Heater
35"
46"
35"
44"
25-1/2"
(648 mm)
25-1/2"
(648 mm)
Opt. Service Access
45-9/16"
(1157 mm)
- 2" x 4" Stud
TARA™PLUS, Right Hand
TARA PLUS RH CUTOUT
Motor
60"
12" H x 24"L
Service Access
60"
61-5/8"
Ref.
58"
(1473 mm)
58"
(1473 mm)
14" x 4"*
Heater (S)
Motor
Opt. Service
Access
59"
Ref.
Heater
27-1/4"
35"
Drain Cutout
27-1/4"
25-1/2"
(648 mm)
25-1/2"
(648 mm)
35"
44"
46"
- 2" x 4" Stud
45-9/16"
(1157 mm)
CUTOUT
TARA™ PLUS Left-hand BACK MOTOR
TARA™PLUS Left-Hand BACK MOTOR
Motor
60"
12" H x 24"L
Service Access
60"
61-5/8"
Ref.
58"
(1473 mm)
58"
(1473 mm)
14" x 4"*
Heater (S)
Motor
59"
Ref.
Opt. Service
Access
Heater
Drain Cutout
27-1/4"
35"
27-1/4"
25-1/2"
(648 mm)
25-1/2"
(648 mm)
35"
44"
46"
45-9/16"
(1157 mm)
- 2" x 4" Stud
CUTOUT
TARA™PLUS Right-Hand BACK MOTOR
TARA™ PLUS Right-hand BACK MOTOR
*Add ¼˝ (6mm) to this dimension when roughing-in for 3-wall niche.
1.
2.
3.
4.
5.
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
Service Access dimensions given are minimum. Service access is still required for units that do not have pre-installed Pump/Motor.
Measurements inside each unit represent cutout in floor to allow for drain/overflow.
All measurements are in inches. To convert to millimeters, multiply inches by 25.4.
Not all export units come with pre-installed Pump/Motor.
SUPPORT FOR CORNER BATHS
APPLY
ADHESIVE
H
2" x 4" STUD
Installation and Operation
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Comfort PLUS Whirlpool Bath
Authorized Service
If you need a referral for a service company near you, or need assistance with operation or maintenance-related
for products, services, and an online copy of these Installation and Operation Instructions.
When requesting service or technical assistance please have available both the model and serial number of your
unit. This information can be obtained from the product registration card provided with your unit. If the card has been
misplaced, this information can be obtained from the specification/serial number label on the unit itself. The label is
located on the wall of the bathtub near the pump/motor.
SPECIFICATION/SERIAL NUMBER LABEL
Core Number,
Serial Number
xxxx-xxxxx
Applicable Electrical Specifications for your unit.
Electrical specifications printed in this area.
MODEL:
xxxxxxx
xxxxx
NAME:
COLOR:
MFG#:
SER#:
xxxxx
xxxxx
You will find your serial
number here
xxxxxx
Made in the USA
Appropriate Safety Compliance Logos for your unit.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
USE TECHNICAL SPECIFICATIONS MANUAL SUPPLIED WITH PRODUCT.
Jacuzzi® Luxury Bath has obtained applicable code (standards) listings generally available on a national basis for products of this
type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product.
Jacuzzi® Luxury Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.
Jacuzzi® Luxury Bath
14525 Monte Vista Avenue
Chino, California, 91710
1-800-288-4002
Page 26
Installation and Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Lifetime Warranty on Jacuzzi Luxury Branded Baths for the Comfort, Comfort Plus,
Pure Air®, Luxury, Salon™ Spa, and Pure Air® II Collections
WARRANTY COVERAGE
Jacuzzi Luxury Bath (the “Company”) offers the following expressed limited lifetime warranty to the original purchaser of any
Jacuzzi® Luxury Bath products provided in the Company’s Comfort, Comfort Plus, Pure Air®, Pure Air® II, and Luxury™
collections ("Bath") who purchases the Bath for personal or single family residential use (“User”): The Company will repair
or replace, at its sole option, the Bath or its equipment in accordance with the following terms and conditions. This warranty
does not apply to non-branded Bath products manufactured by the Company.
LIFETIME WARRANTY ON BATHS
The Company extends to the User of the Bath a non-transferable limited lifetime warranty that the shell will maintain its
structural integrity and configuration and be free of water loss due to a defect in the bathtub shell. This warranty covers
only the bathtub shell and the manufacturer installed pump, jets, controls, and blower against defects in material or
workmanship. This warranty does not apply to any display models or to any options or accessories which are covered under
our limited ninety (90) day warranty set forth below. Warranty coverage begins on the date the unit was originally purchased
by the User and upon receipt by the Company of a completely filled out Warranty Registration Card as described below.
2 YEAR LABOR WARRANTY FOR ALL FACTORY INSTALLED COMPONENTS
Our limited labor warranty is for a period of two (2) years from the date the unit was originally purchased by the User, but
not more than Three (3) Years from date of manufacture. All factory installed components (e.g., pump, motor, blower, and
plumbing) are covered under our labor warranty against failure due to defects in materials and workmanship.
NINETY DAY (PARTS ONLY) LIMITED WARRANTY ON OPTIONS AND ACCESSORIES
Our limited warranty on options and accessories is for ninety (90) days for parts only. Our warranty covers options and
accessories manufactured (e.g., drains fill spout kits, trim kits, skirts, video monitors, plasma television screens, CD
and MP3 players and other music and video devices and optional heaters) against defects in material or workmanship.
Warranty coverage begins on the date the option or accessory was originally purchased by the User. These items may be
covered by a manufacturer's warranty which may have a longer duration than this limited warranty. Please confirm with the
manufacturer the duration of the appropriate warranty for Options and Accessories.
WARRANTY LIMITATIONS
Our limited warranty does not cover defects, damage, or failure caused by the common carrier, installer, user, or other
persons, pets, or rodents, or resulting from, without limitation, any of the following: careless handling (lifting unit by
plumbing, abrading finish, etc.) including its own negligence; modification of any type for any reason (including modification
to meet local codes); improper installation (including installation not in accordance with instructions and specifications
provided with the unit); connections supplied by the installer of the equipment; improper voltage supply or unauthorized
electrical modification; misuse; incorrect operation, or lack of proper routine maintenance; operation of the unit without
specified minimum amount of water or at inappropriate water temperature; use of abrasive or improper cleaners; or acts of
God, such as lightning, floods, earthquakes, etc.
In addition, THE COMPANY WILL NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES or
losses arising from any cause (e.g., water damage to carpet, ceiling, tiles, marble, loss of use, etc.) including its own
negligence; damages to, respecting, or resulting from: plated parts when pool and/or spa chemicals are used in the unit or
hard water conditions; optional bath equipment not manufactured by the Company but supplied by Dealer, installer or the
Company; the unit's prior usage as an operational display; or defects that should have been discovered before installation.
This limited warranty does not include: labor, transportation, or other costs incurred in the removal and/or reinstallation of
the original unit and/or installation of a replacement unit; any costs relating to obtaining access for repair; or loss of use
damage, including loss of sales, profit or business advantage of any kind under any circumstances. Bath units are excluded
from any warranty coverage if any addition, deletion, or modification of any kind whatsoever has been made to the unit (or
to any component). Warranty coverage is provided in the United States of America and Canada only.
EXCLUSION OF IMPLIED WARRANTIES
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED
ALTOGETHER OR TO THE FULLEST ExTENT ALLOWED BY LAW.
NOTICE: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
There are no warranties applicable to Jacuzzi Luxury Bath products except as expressly stated herein or as implied by
applicable state and federal laws. The Company will not be responsible for any statements or representations made in
any form that go beyond, are broader than or are inconsistent with any authorized literature or specifications furnished by
the Company. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
®
Luxury Bath by Jacuzzi
HE96000
Download from Www.Somanuals.com. All Manuals Search And Download.
RETURN OF WARRANTY REGISTRATION
To register your product, please go to our web-site Jacuzzi.com, click on Bath and Showers, then select ONLINE
WARRANTY REGISTRATION from the top of the page. You will then be prompted to enter your product Serial Number
followed by your warranty registration information. Or you may also register by completing the registration below and
mailing it to jacuzzi at the address provided below.
The attached Warranty Registration MUST be filled out by the purchaser within thirty (30) days from purchase and
received by Jacuzzi Luxury Bath in order for this warranty to become effective.
RESPONSIBILITIES OF OTHERS
Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of
the User. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit
and on the shipping carton advising the installer of this responsibility. In the event of a problem, the unit must not be
installed. The Company is not responsible for failures or damage that could have been discovered, repaired, or avoided
by proper inspection and testing (including proper water testing) prior to installation.
Damage occurring in transit is the responsibility of the carrier. The User or installer MUST open the crate and inspect
the unit for damage when it is delivered. If damage is discovered, it must be reported immediately to the seller and the
carrier in writing, and an inspection requested. Failure of the carrier to respond should be reported to the seller and the
carrier. Your freight claims should be filed promptly thereafter.
Damage occurring to the unit during installation is the responsibility of the installer and/or building contractor and
damage occurring thereafter is the responsibility of the user.
Failure of any optional equipment is the sole responsibility of the equipment manufacturer except as provided above
and shall not extend to or apply to any replacement parts for the Options and Accessories. Any replacement parts shall
be covered by the original equipment manufacturer.
The Distributor or Dealer is responsible for knowing local code requirements and notifying the installing contractor and/
or User of these requirements at the time of purchase. The Company is not responsible for costs to modify any product
to obtain any code approval, such as city, county, or state building codes in U.S.A. or municipal or provincial codes in
Canada.
WARRANTY SERVICE
For the customer's benefit, the Company maintains a list of independent service personnel to perform required warranty
service repairs. Such firms are not agents or representatives of the Company and cannot bind the Company by words
or conduct.
The Company will provide the warranty service described above when the following conditions have been met: the
failure is of the nature or type covered by the warranty; the User has informed an Authorized Jacuzzi Luxury Bath
Service Agent or Warranty Service Department Representative of the nature of the problem during the warranty period;
conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the user proving that the
failure occurred or was discovered within the warranty period; an authorized independent service person or Company
representative has been permitted to inspect the unit during regular business hours within a reasonable time after the
problem was reported by the User. In order to obtain warranty service, contact Jacuzzi Luxury Bath at:
jacuzzi.com
or
Warranty Service Department
14525 Monte Vista Avenue
Chino, California 91710
Call: 1-(800) 288-4002
To obtain warranty replacement for factory-installed components for Company supplied options and accessories
manufactured and supplied by the Company, call or write the above. Provide a description of the problem and proof
of purchase. You will be instructed how to obtain replacements and where to return, at your expense, the failed
component(s), option(s), or accessory(ies).
All replacement parts, equipment, and repairs shall assume the remaining warranty period of the part(s) replaced.
The Company's warranty obligation shall be discharged upon tender of replacement or repair. The customer's refusal to
accept the tender terminates the Company's warranty obligation.
Ninety-Day
Parts Only
Limited Warranty
On
Accessory(ies)
Download from Www.Somanuals.com. All Manuals Search And Download.
|