TM-2001U
TM-2701SU
TM-2001U
OPERATING INSTRUCTIONS [
]
TM-2701SU
For models:
TM-2001U
TM-2701SU
COLOR MONITOR/RECEVER
USER'S GUIDE
Illustration of TM-2001U and RM-C307
IMPORTANT NOTE TO THE CUSTOMER
In the space below, enter the model number and serial number of your television
(located at the rear of the television cabinet). Staple your sales receipt or invoice to
the inside cover of this guide. Keep this user's guide in a convenient place for
future reference. Keep the carton and original packaging for future use.
Serial Number
Model Number
LCT1059-001A-A
0801-A-JII-JIM
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
IMPORTANT SAFETY PRECAUTIONS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered
and manufactured to assure your personal safety. But improper use can result in poten-
tial electrical shock or fire hazards. In order not to defeat the safeguards incorporated in
this TV set, observe the following basic rules for its installation, use and servicing.
And also follow all warnings and instructions marked on your TV set.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:To reduce the risk of electric shock.
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade of the plug is wider
than the other).
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dan-
gerous voltage” within the product’s enclosure
that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
(POLARIZED-TYPE)
This safety feature allows the plug to fit into the power outlet only one way. Should
you be unable to insert the plug fully into the outlet, try reversing the plug.
Should it still fail to fit, contact your electrician.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the appliance.
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information. If you are not sure of the type of power
supply to your home, consult your TV set dealer or local power company. For battery
operation, refer to the operating instructions.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS TV SET TO RAIN OR MOISTURE.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF
THIS UNIT.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV
set where power cord is subject to traffic or abuse. This may result in a shock or fire
hazard.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid Improper installation and never position the unit where good
ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician.
Do not attempt to repair it yourself or remove the rear cover.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is
grounded so as to provide some protection against voltage surges and built-up static
charges. Section 810 of the National Electrical Code provides information with
respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection requirements for the grounding electrode.
Changes or modifications not approved by JVC could void the warranty.
* When you don’t use this TV set for a long period of time, be sure to
disconnect both the power plug from the AC outlet and antenna for
your safety.
* To prevent electric shock do not use this polarized plug with an
extension cord, receptacle or other outlet unless the blades can be
fully inserted to prevent blade exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
7 An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as contact with them might be
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect
the antenna. This will prevent damage to product due to lightning storms or power line
surges.
fatal.
14 A TV set and cart combination should be moved with
care. Quick stops, excessive force, and uneven sur-
faces may cause the TV set and cart combination to
overturn.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
SERVICE
15 Unplug this TV set from the wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions.
Adjust only those controls that are covered in the operating instructions as
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a
need for service.
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated
during operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a
bed, sofa, rug, etc.
16 Do not attempt to service this TV set yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
17 When replacement parts are required, have the service technician verify in writing
that the replacement parts he uses have the same safety characteristics as the orig-
inal parts. Use of manufacturer’s specified replacement parts can prevent fire,
shock, or other hazards.
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should
use a mounting kit approved by the manufacturer.
18 Upon completion of any service or repairs to this TV set, please ask the service techni-
cian to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a pic-
USE
ture tube implosion. Ask a qualified service technician to dispose of the TV set.
10 Caution children about dropping or pushing objects into the TV set through cabinet openings.
Some internal parts carry hazardous voltages and contact can result in a fire or electrical shock.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-
40 of the NEC that provides guidelines for proper grounding and, in particular, spec-
ifies that the cable ground shall be connected to the grounding system of the build-
ing, as close to the point of cable entry as practical.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an
aerosol cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose.
Such additions may result in a hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup 1
Unpacking Your Television
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television,
please check to make sure you have all of the following items. In addition to this guide, your television
box should include:
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you need
to begin using your new television right away. This information includes basic instructions on
operating your remote control, making a simple cable/antenna and optional VCR connection and,
finally, information on programming your television's Auto Tuner.
1 Remote
Control
Two AA
Batteries
1 Television
If you have questions, or for more detailed information on any of these steps, please consult the
other detailed sections of this guide.
TV CATV VCR DVD
POWER
INPUT
VIDEO STATUS
1
4
2
5
3
6
Step One - The Remote Control
DISPLAY
7
8
0
9
SLEEP TIMER
100+
RETURN+
HYPER SURROUND
RM-C306
The remote control is the key to operating your television's many great features. Before you can
operate your remote control, you first need to install the batteries (included).
A matching TV stand for
the TM-2701SU is also
available (sold separately).
MUTING
V
CHIP
+
CH
VOL
VOL
+
CH
MENU
EXIT
VCR CHANNEL
PREV NEXT
VCR/DVD
POWER TV/VCR
REW
PLAY
FF
REC
STOP PAUSE
Note:Your television
and/or remote control may
differ from the examples
illustrated here.
INPUT
2
VIDEO
L
M
O
N
O
A
U
D
I
O
R
MENU
CHANNEL
OPERATE
VOLUME
POWER
ON
TIMER
OPEN/CLOSE
STILL/PAUSE
TV
BNC connection box
IN
OUT
Raise the latch on the remote’s back cover, or push down on the back cover and slide the cover
towards the bottom of the remote control to remove. Insert two batteries carefully noting the “+” and
“–” markings, placing the “–” end in the unit first. Slide or snap the cover back into place.
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner of the remote.
Once you have unpacked your television, the next step is to connect it to your antenna/cable or
satellite system and to connect the audio/video devices you want to use with your television. To
make these connections you will use plugs like the ones illustrated below.
MUTING
V
CHIP
POWER
+
CH
VOL
+
VOL
Remote Power
Button
CH
MENU
EXIT
S-Video Plug
A/V Input Plug
RF Connectors
(TM-2701SU only)
Remote Key Feature Buttons
Used to connect
Used to connect a
audio/video devices like
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available channels.
The right and left buttons will turn the volume up or down. These buttons are also marked with four
arrows and are also used with JVC's onscreen menu system. You will need to use these buttons
later in the Quick Setup.
Used to make video
connections with
some VCRs, DVDs,
Camcorders, etc.
coaxial cable from an
external antenna or
Cable TV system.
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
The next step is to connect your television to an antenna or cable.
We recommend that before you start using your new television, you read this entire User’s Guide so
you can learn about your new television’s many great features. But if you’re anxious to start using
your television right away, a quick setup guide follows on the next three pages.
Proceed to Step Two
ꢀ
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup 3
Quick Setup 2
Step Two - Making Basic Connections
Step Three - Auto Tuner Setup
Next you will need to connect your television to an antenna or cable system. The most basic
antenna/cable connection is shown below. For more detailed connections, such as ones where a
cable box is required, see pages 11 and 12.
JVC’s onscreen menu system lets you set your television up to meet your own personal viewing
preferences. The menu screens and their features are discussed in detail in this book. The menu
settings are optional, you can set as many or as few of them as you wish. But to begin watching
your television right away you will need to run the Auto Tuner Setup. This lets your television learn
the channels it is able to receive. To run the Auto Tuner Setup follow the steps below.
Press the MENU button on the remote control.
Cable/RF connector
Press the œ❷ buttons to move to AUTO TUNER SETUP
Press the ➛❿ buttons to begin AUTO TUNER SETUP
INPUT
TUNER MODE
:
CABLE AIR
S-VIDEO
OVER
75Ω
(VHF/UHF)
AUDIO OUT
START
VIDEO
L/ MONO
R
L
➛❿ To choose CABLE (if you are connected to a cable system) or AIR (if you use an antenna)
œ❷ To move to START
R
Illustration of TM-2701SU
➛❿ To start Auto Tuner Setup
1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.
The Auto Tuner will now memorize all of the clear, active channels your television can receive. This
will take one or two minutes.
You may also wish to connect a VCR at this point. A basic stereo VCR connection is shown below. For
detailed instructions on connecting other components or a home theater system, see pages 11 to 14.
Note: A VCR is not required to operate your television.All others use connections shown on pages 11
and 12.
NOW
PROGRAMMING!
AV Cables/Plugs
48
IN
OUT
BNC
Connector
Video
box
The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen.
The Auto Tuner programming is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming your
remote control, or using the JVC onscreen menu system to customize your television viewing experience.
IDEO
VCR
Yellow
IN
L
L/ MONO
White
Red
I
R
INPUT
S-VIDEO
OVER
75
(VHF/UHF)
VIDEO
L/ MONO
R
U
I
O
O
U
T
L
R
Audio
Illustration of TM-2701SU
1) Connect the yellow video cable out from the VCR’s Video Output, in to the BNC connector box Input
jack, OR connect an S-Video cable from the VCR’s S-Video Output, to the TV’s S-Video Input.
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio
Input Jack.
3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
Finally, once you have finished your connections, plug the power cord into the nearest power outlet
and turn on the television.
The Quick Setup
is complete
STOP
Proceed to Step Three
ꢀ
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Quick Setup Guide . . . . . . . . . . . . 7
Connections
Cable and VCR Connections
BUTTON FUNCTIONS
CONNECTIONS
Menu. . . . . . . . . . . . . . . . . . . 38
Exit. . . . . . . . . . . . . . . . . . . . 38
Display . . . . . . . . . . . . . . . . . . 38
Video Status . . . . . . . . . . . . . . . 39
Sleep Timer . . . . . . . . . . . . . . . . 39
Hyper Surround . . . . . . . . . . . . . 39
Muting . . . . . . . . . . . . . . . . . . 39
100+ . . . . . . . . . . . . . . . . . . . 40
Return+. . . . . . . . . . . . . . . . . . 40
Input. . . . . . . . . . . . . . . . . . . 40
VCR Buttons . . . . . . . . . . . . . . . 41
DVD Buttons . . . . . . . . . . . . . . . 41
TV/CATV Switch . . . . . . . . . . . . . 41
VCR/DVD Switch . . . . . . . . . . . . . 41
There are two basic types of antenna or cable connections:
Cable and VCR Connections . . . . . . . 11
Stereo VCR/DVD Connections . . . . . . 13
Connecting to an External Amplifier . . . 13
Connecting to a Camcorder . . . . . . . 14
Headphone Connection . . . . . . . . . 14
• If you have an antenna or have a cable system that does not require you use a cable box to
select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access any or all of the
channels, please refer to Diagram #2.
• For your convenience, connection to a VCR is also shown in the following diagrams. You may
omit the VCR from your connections if you wish.
GETTING STARTED
Remote Control
Remote Control Basics. . . . . 15
Changing the Batteries. . . . . 15
CATV & Satellite and DVD Codes. . . . . 16
VCR Codes . . . . . . . . . . . . . . . . 17
• Please note: The S-Video Input is available only on the TM-2701SU.
Diagram #1
DVD Codes . . . . . . . . . . . . . . . . 18
APPENDICES
MENU FUNCTIONS
Troubleshooting . . . . . . . . . . . . . 42
Search Codes . . . . . . . . . . . . . . . 43
BNC connection box . . . . . . . . . . 44
Brige-connection . . . . . . . . . . . . . 45
Specifications. . . . . . . . . . . . . . . 47
INPUT
Using the Guide . . . . . . . . . . . . . 19
Auto Tuner Setup . . . . . . . . . . . . . 20
Channel Summary. . . . . . . . . . . . 21
V-Chip. . . . . . . . . . . . . . . . . . . 22
Set Lock Code. . . . . . . . . 29
Picture Settings
S-VIDEO
OVER
75Ω
(VHF/UHF)
AUDIO OUT
VIDEO
L/ MONO
R
L
R
Tint . . . . . . . . . . . . . . . 30
Color . . . . . . . . . . . . . . 30
Picture . . . . . . . . . . . . . 30
Bright . . . . . . . . . . . . . 30
IN
Detail . . . . . . . . . . . . . 30
Noise Muting . . . . . . . . . 31
Set Video Status . . . . . . . . 31
Sound Settings
Illustration of TM-2701SU
OUT
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the VCR.
Bass . . . . . . . . . . . . . . 32
Treble . . . . . . . . . . . . . 32
Balance . . . . . . . . . . . . 32
MTS (Multi-channel Sound) . . 33
TV Speaker . . . . . . . . . . 33
General Items
2) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV.
•
•
Please consult your VCR’s owner’s manual for more information on its operation.
See page 13 for instructions on making stereo connections with your VCR.
Auto Clock Set . . . . . . . . . 34
Manual Clock Set. . . . . . . 35
On/Off Timer . . . . . . . . . . 36
Language. . . . . . . . . . . 36
Closed Caption . . . . . . . . 37
Background . . . . . . . . . . 37
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connections
Cable and VCR Connections - Continued
Stereo VCR/DVD Connections
Diagram #2
You can use the connection shown below for high-quality stereo sound from your HiFi VCR. You can
also use this diagram to connect your television to a DVDplayer.
• The S-Video connection is available only on the TM-2701SU
INPUT
Cable
Box
S-VIDEO
OVER
Illustration of TM-2701SU
OUT IN
75Ω
(VHF/UHF)
Stereo VCR or DVD Player
IN
AUDIO OUT
VIDEO
L/ MONO
R
L
R
VCR
IN
BNC
Connector
box
INPUT
S-VIDEO
OVER
OUT
OR
(Yellow)
(White)
IN
75
AUDIO OUT
(VHF/UHF)
VIDEO
(Red)
OUT
Illustration of TM-2701SU
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output on the cable box, in to the RF Input on the back of the
VCR.
1) Connect the yellow video cable out from the VCR’s Video Output, in to the BNC connector box Input
jack, OR connect an S-Video cable from the VCR’s S-Video Output, to the TV’s S-Video Input.
3) Connect an RF cable from the RF Output on the VCR, in to the RF Input on the back of the TV.
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio
•
•
Please consult your VCR’s owner’s manual for more information on its operation.
See page 13 for instructions on making stereo connections with your VCR.
Input Jack.
3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
The connection diagrams are intended to show some basic connections. Some cable
companies may require special connections to properly use your television. If you follow
these diagrams and the television does not work properly, contact your local cable
operator for more connection information.
Connecting to an External Amplifier
INPUT
S-VIDEO
OVER
75Ω
(VHF/UHF)
AUDIO OUT
VIDEO
L/ MONO
R
Illustration of TM-2701SU
1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack.
2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack.
•
See also “TV Speaker” on page 33 for more information on using external speakers.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Remote Control
Connecting to a Camcorder
Remote Control Basics
Before you can operate the remote control, you must first install
the batteries (included). See “Changing the Batteries” at the
bottom of this page for instructions. (For an illustration, please see
page 7.)
You may connect a camcorder to your television by using the front Input Jacks (Input 2). You may
also connect a game console or other equipment using these jacks. Camcorders may also be
connected to the television’s rear input jacks.
•
TV CATV VCR DVD
POWER
INPUT
INPUT
2
Press the POWER button to turn the television on or off.
•
•
VIDEO
L
MONO
AUDIO
R
Make sure the TV/CATV switch is set to TV. Move the switch to
CATV only if you need to operate a cable box.
VIDEO STATUS
1
2
5
3
6
Slide the VCR/DVD selector switch to VCR to control a VCR,
slide to DVD to control a DVD player. Please see pages 16 to
18 for instructions on programming your remote control to
operate a Cable box, VCR or DVD player.
•
4
DISPLAY
7
8
0
9
Press the CH+ and CH- buttons to scan through the channels.
Tap the CH+ or CH- button to move through the channels one
channel at a time.
•
•
•
•
100+
RETURN+
SLEEP TIMER
Illustration of TM-2701SU
HYPER SURROUND
RM-C306
1) Connect the yellow video cable out from the Camcorder’s Video Output, in to the TV’s Video
To move rapidly through the channels using JVC’s Hyperscan
feature, press and hold CH+ or CH-. The channels will zip by at
a rate of five channels per second.
Input jack.
2) Connect the white audio cable out from the Camcorder’s Left Audio Output, in to the TV’s Left
MUTING
V
CHIP
+
CH
Audio Input Jack.
3) Connect the red audio cable out from the Camcorder’s Right Audio Output, in to the TV’s
Press VOL+ or VOL - to raise or lower the volume. An indicator
bar will appear onscreen to show you the television volume
level.
VOL
+
VOL
Right Audio Input Jack.
CH
•
If your Camcorder is a mono sound model it will have only one audio jack. Connect it to the
TV’s Left Audio Jack.
MENU
EXIT
The CH+/- and VOL+/- buttons are also used to navigate JVC’s
onscreen menu system.
VCR CHANNEL
PREV NEXT
VCR/DVD
POWER TV/VCR
You can directly access specific channels using the 10-key pad.
•
•
REW
PLAY
STOP
FF
For more information on remote control button features, see
pages 38 to 41. For information on using the onscreen menus,
see page 19.
PAUSE
REC
OPEN/CLOSE
STILL/PAUSE
Headphone Connection (available on 20 inch models)
You can connect a pair of headphones or earphone to the television using the headphone jack on the front
panel.
Notes: Remote control model RM-C306 is shown at the left.
A different model remote control may have come with your
television.
TV
1) Plug a headphone/earphone jack into the headphone jack on the television’s front panel.
Changing the Batteries
Push down on the remote’s back cover and slide towards the bottom to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and "-" markings on the batteries and on the remote
control. To avoid a potential short circuit, insert the "-" end first. Be sure to use only size AA batteries.
When batteries are installed, slide the cover back into place (until it clicks into position).
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to one
year. We recommend using alkaline batteries for longer battery life.
When you change the batteries, try to complete the task within three minutes. If you take longer than three
minutes, the remote control codes for your VCR, DVD, and/or Cable Box may have to be reset (page 16-18).
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Remote Programming
VCR setup
Setting the CATV, VCR and DVD Codes
The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward,
rewind, pause, record, channel up, and channel down operation.
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond to any
of the codes listed below or to the code search function, use the remote control supplied by the
manufacturer.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the VCR.
Cable Box or Satellite setup
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to any
code, try the Search Codes Function, on page 43.
• Some manufacturer’s VCR’s may not respond to the TV/VCR button, even if other buttons work properly.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
• To record, hold down the REC button on the remote and press PLAY
.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed using the 10 key pad.
5) Release the DISPLAY button.
VCRs
CODES
035
027, 032, 095
VCRs
CODES
VCRs
CODES
Admiral
Aiwa
Marantz
Marta
003, 004, 005
064
Samsung
037, 060, 062,
033, 089
Samtron
Sansui
089
6) Confirm the operation of the Cable Box/Satellite receiver.
Akai
029, 072, 073, Memorex
024, 067
003, 026, 020,
052
074
038, 040, 047,
048, 041, 042
MGA
• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 43.
Audio Dynamic 003, 005
Sanyo
Scott
063, 067, 091,
071
Bell & Howell
Broksonic
Canon
063, 071
020, 026, 094
023, 025
043
Minolta
058, 045, 093
Mitsubishi
038, 040, 047,
048, 041, 042,
078, 090
059, 060, 062,
067, 038, 040,
047, 048, 026,
020
Cable Box
ABC
CODES
024
Cable Box
Puser
CODES
032
Digital
Satellite
Systems
CODES
CCE
Multitech
NEC
047, 027, 062
Archer
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
RCA
061, 070
032
Citizen
064
Echostar
Express VU
G.E.
100, 113, 114
100, 113
003, 004, 005,
000
024, 023
Sears
Cableview
Citizen
Realistic
Regal
063, 064, 065,
066, 058, 000,
001
Craig
063, 029, 064
058, 064, 040,
041, 042, 045,
068
Curtis Mathes
045, 024, 027,
093
Olympic
106
Curtis
Shintom
Sharp
075
Optimus
028, 021, 035,
064
026, 020
Daewoo
043, 059, 024,
092
003, 004, 005
Diamond
Eagle
G.I.
108
Regency
034
035, 036, 080,
088
Gradiente
Hitachi
112
Orion
Rembrandt
037, 032, 051,
038
DBX
Eastern
GC Brand
Gemini
034
Panasonic
023, 024, 021,
022
Signature 2000 027, 035
104, 111
Dimensia
Emerson
045, 093
032, 051
022, 043
Samsung
051
Singer
Sony
075
HNS (Hughes)
104
043, 026, 077,
061, 025, 042,
020, 076
Penney
024, 058, 045,
063, 003, 004,
005, 093
028, 029, 030,
053, 054, 055
Scientific Atlanta 057, 058, 059
Panasonic
Philips
105
General Instrument 065, 024, 025,
026, 027, 020,
SLMark
051, 047
051, 056
032, 051
102, 103
SV 2000
Sylvania
027
Fisher
Funai
063, 066, 067,
065, 071, 091
Sprucer
Stargate
021, 022, 057,
023
040, 041, 042,
045, 058, 064
049, 024
Pentax
Philco
058, 005, 045,
093
Primestar
108
031, 023, 024,
027
027, 026, 020,
000
Hamlin
Proscan
RCA
106, 109, 110
106, 109, 110
031, 024, 027,
023, 026, 020,
043
Telecaption
Teleview
Texscan
Tocom
067
Symphonic
Tashiro
Tatung
027, 081
064
Hitachi
Jerrold
047, 051
044
033, 045, 024
G.E.
Sony
107
065, 024, 025,
026, 027, 020,
021, 022, 057,
023
Philips
031, 023, 024,
086
003, 004, 005
Go Video
037, 051, 049,
050, 089
Star Choice
104, 108
Teac
003, 004, 027,
005
035, 036, 066
050
Pioneer
Proscan
023
Toshiba
Uniden
101
Goldstar
064
Toshiba
Unika
045, 058, 023,
024, 031, 046,
059, 060, 033,
087, 093
Technics
021, 022, 023,
024
102, 103
Gradiente
083, 084, 081,
000, 001
Macom
049, 050, 051,
054
032, 025
Teknika
Toshiba
024, 027, 070
059, 046, 079
Universal
Videoway
Viewstar
Zenith
022, 032
052
Hitachi
023, 045, 058,
027, 081, 093
Magnavox
033
Quasar
021, 022, 023,
024
030
Memorex
Movietime
Vector Research 005
Instant Replay 024, 023
029, 030
063, 046
046
032, 051
039, 037, 048
Wards
Yamaha
Zenith
035, 036, 067,
044, 064
Radio Shack
033, 024, 063,
036, 067, 040,
027
Jensen
JVC
003
Oak
000, 001, 002,
003, 004, 005
Panasonic
055, 056, 060,
071
Zenith/Drake
Satellite
063, 003, 004,
005
033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093
RCA
Paragon
Philips
063
Kenwood
LXI
003, 004, 064,
005
044, 082, 064,
094
028, 029, 030,
052, 053, 031,
069
027, 064, 058,
065, 066, 063,
067
Realistic
024, 063, 036,
067, 040, 027
Pioneer
Pulsar
047, 062
051, 032
Magnavox
031, 023, 024,
086
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Onscreen Menus
DVD setup
Using the Guide
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
Certain symbols are used throughout this guide to help you learn about the features of your new
television. The ones you will see most frequently are:
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
œ❷ Up and Down arrows mean press the CHANNEL
or DOWN buttons let you:
U
P
or CHANNEL DOWN buttons. Pressing the UP
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
6) Confirm the operation of the DVD player.
• Scan through TV channels (when not in a menu screen)
• If your DVD player does not respond to the first code, try the others listed. If it does not respond to
any code, try the Search Codes Function, on page 43.
➛❿ Left and right arrows mean press the VOLUME LEFT or VOLUME RIGHT buttons to:
• Select a highlighted menu item
•
After you program your remote, some DVD buttons may not work properly. If some buttons do
not work properly, use the remote control which came with your DVD player.
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
DVD Player
Aiwa
CODES
043
DVD Player
Raite
CODES
The "Press Button" icon means you should press the button named on your remote control.
(Button names appear in SMALL CAPITAL LETTERS.)
033
Apex
040
RCA
021, 026
034
Denon
Hitachi
JVC
020, 037
030, 031
000
Sampo
Samsung
Sharp
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
030
028
Kenwood
Konka
035
Silvania
Sony
038
SET LOCK CODE
039
024, 045, 046,
047
Mitsubishi
Onkyo
025
SELECT
OPERATE
BY
BY
EXIT BY
EXIT
041
Technics
Toshiba
Wave
020
Oritron
Panasonic
Philips
Pioneer
044
023
020
042
023, 036
022
Yamaha
Zenith
020
The Onscreen Menus
To bring up the onscreen menu, press the MENU button on the remote control. The item that
027, 032
appears in yellow is the one currently selected.
Note: Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Initial Setup
Channel Summary
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip
ahead to “Channel Summary” to continue setting up your television.
Channel Summary allows you to customize the line-up of channels received by your TV. You can
add or delete channels from the line-up or prevent any unauthorized viewers from watching any or
all 181 channels.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active
ones and skipping over blank ones or channels with weak signals. This means when you scan (using the
CHANNEL +/- buttons) you will receive only clear, active channels.
Press the MENU button
œ❷
To CHANNEL SUMMARY
To operate
Press the MENU button
➛❿
œ❷
To AUTO TUNER SETUP
To operate
➛❿
:
CH ADD
01
CH ADD
:
:
:
➛❿¤
To choose CABLE or AIR
To move to START
06
07
08
09
10
œ❷
02X
X
X
➛❿
To start Auto Tuner Setup
03
:
:
04
05
X
X
NOW
PROGRAMMING !
The Channel Summary screen (above) will now be displayed with the channels set to scan marked
with an "X". You can delete channels from the scan by removing the "X". If any channels were
missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the
channel number.
48
Programming will take approximately 1 to 2
minutes.
œ❷
To the ADD column
PROGRAMMING OVER!
➛❿
To include or delete from scan
EXIT when finished
• Noise Muting will not work during Auto Tuner Setup.
You can block access to a channel by activating the Channel Lock.
œ❷
To CHANNEL SUMMARY
➛❿
œ❷
To operate
To the Lock Column
ZERO to lock or unlock that channel
EXIT when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad.
If the wrong code is entered, the message “INVALID
LOCK CODE!” will flash on the screen:
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
The channel cannot be accessed until the correct
code is entered.
NOTE:
NO. - - - -
• Some cable systems experience interference from radio frequencies on cable Channel 95. You
may delete this channel from your scan by removing the “X” next to it on the Channel Summary
screen shown on the next page.
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 29.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
V-Chip
V-Chip
Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United
States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to pro-
gram your TV to receive, or not to receive, programs based on content according to the guidelines.
Programs which exceed the ratings limits you set will be blocked. When a viewer attempts to watch
a blocked channel, this message appears:
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒❒❒TVY is Appropriate for All Children.
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
❒❒❒TV Y7 is for Older Children.
Most parents would find such programs suitable for children 7 and above. These programs may
contain some mild fantasy violence or comedic violence, which children should be able to discern
from reality.
Programs with the following ratings are designed for the entire audience.
❒❒❒TV G stands for General Audience.
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
The channel will remain blocked until the correct lock code is entered (see page 29 for information
on setting your lock code).
You can customize the V-Chip settings of your television to match your personal tastes. The V-Chip
menu below is the starting point for your V-Chip settings.
❒❒❒TV PG Parental Guidance Suggested.
May contain some, but not much, strong language, limited violence, and some suggestive sexual
dialog or situations. It is recommended that parents watch these programs first, or with their
children.
V-CHIP
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED VIEW BLOCK
ON OFF
❒❒❒TV 14 Parents Strongly Cautioned.
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒❒❒TV MA Mature Audiences Only.
These programs are specifically for adults and may be unsuitable for anyone under 17 years of
age. TV MA programs may have extensive V, S, L, or D.
FINISH
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any or all
of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each of the three
V-Chip formats appear in the next seven pages along with descriptions of the rating categories.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content are also
supplied with the V-Chip rating. These types of content may also be blocked. The content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
To access the rating categories:
Press the MENU button
œ❷
To V-CHIP
➛❿
To operate (Lock icon
will appear)
Press ZERO to access the V-Chip menu
➛❿
œ❷
To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate)
To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RATINGS
(see following pages for descriptions of each item)
Special Note about Ratings
Some programs are not broadcast with a ratings signal. Therefore, even if you setup V-Chip
ratings limits, these programs will not be blocked. Parents are cautioned to preview the contents
of these programs or movies.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
V-Chip
V-Chip
Setting US V-Chip Ratings
Setting ratings with the V-Chip button
To access Rating information about a certain program, press the V-CHIP button while viewing that
program. A display like this will appear:
Press the MENU button
œ❷
To V-CHIP
➛❿
To operate (Lock icon
will appear)
PROGRAM IS RATED
:
TV-PG - V
Press ZERO to access the V-Chip menu
V-CHIP ON OFF
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED VIEW BLOCK
If you decide you want to block this category of viewing, press "0" while the above screen is
visible, and all programs from that category will be blocked.
Example 1:
If you want to set your V-Chip settings to block all programming above TV PG:
Press ZERO when TV-PG is displayed
FINISH
TV TV TV TV TV TV
MA
14
PG
G
Y7
Y
➛❿
œ❷
To turn V-Chip ON or OFF
V/FV
To move to SET US TV RATINGS
S
L
D
➛❿
To operate
Directions to set US V-Chip Ratings:
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the
œ
or❷¤to move the cursor to the correct location. Press
➛
or
❿
to turn the locking feature on or off. An
All Programming above TV PG will be blocked.
item is locked if the icon appears instead of a “—”.
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that column
and add a lock icon. Once you've put a lock on the top row, everything in that column is
automatically locked.
Example 2:
If you want to set your V-Chip settings to block all programming above a current setting such as
TV PG-V (with violence):
œ❷
To the TV 14 Column
To turn on the lock
➛❿
Press ZERO when TV-PG - V is displayed
TV TV TV TV TV TV
MA
14
PG
G
Y7
Y
TV TV TV TV TV TV
Y
MA
14
PG
G
Y7
V/FV
V/FV
S
L
D
S
L
D
FINISH
œ❷
To FINISH
To save settings and exit
All Programming above TV PG - V (with Violence) will be blocked.
➛❿
• If you want to change the setup, move the cursor to the top column and change the lock icon to
• For Children's programming you can block TV-Y and Y7 programs by Pressing “0” when Y is
displayed during a program. Programming for audiences other than children’s audiences will not be
affected.
“—” by pressing
➛
or
❿
again. You may then select individual categories to block.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
V-Chip
V-Chip
Movie Ratings
Canadian V-Chip Ratings
❒❒❒NR - Not Rated.
❒❒❒E - Exempt.
This is a film which has no rating. In many cases these films were imported from countries which do
not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to
have their film widely released.
Exempt programming includes: news, sports, documentaries and other information programming, talk
shows, music videos, and variety programming.
❒❒❒C – Programming Intended for Children.
NR (Not Rated) Programming may contain all types of programming including children's
programming, foreign programs, or adult material.
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒❒❒G – General Audience.
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒❒❒C8+ – Programming Intended for Children 8 and Over.
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low intensity and
will show the consequences of the acts. There will be no offensive language, nudity or sexual content.
❒❒❒PG – Parental Guidance.
Parental Guidance means the movie may contain some contents such as mild violence, some brief
nudity, and strong language. The contents are not deemed intense.
❒❒❒G – General Audience.
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒❒❒PG-13 – Parents Strongly Cautioned.
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒❒❒PG - Parental Guidance.
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒❒❒R - Restricted.
❒❒❒14+ - 14 Years and Older.
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early
teens. Programming may contain mature themes and scenes of intense violence.
These films contain material that is explicit in nature and is not recommended for unsupervised
children under the age of 17.
❒❒❒NC-17 - No One Under 17.
These movies contain content which most parents would feel is too adult for their children to view.
Content can consist of strong language, nudity, violence, and suggestive or explicit subject matter.
❒❒❒18+ - Adult.
Material intended for mature audiences only.
❒❒❒X - No One under 18.
Inappropriate material for anyone under 18.
Directions to set Canadian V-Chip Ratings:
Press the MENU button
Directions to set Movie (MPAA) Ratings:
œ❷
To V-CHIP
Press the MENU button
➛❿
To operate (Lock icon
appears)
œ❷
To V-CHIP
Press ZERO to access V-Chip setup options
➛❿
To operate (Lock icon
appears)
œ❷
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
Press ZERO to access V-Chip setup options
➛❿
œ❷
To SET MOVIE RATINGS
To enter movies menu
18+ 14+ PG
G
C8+
C
➛❿
For example, to block viewing of X and NC-17 rated from shows:
FINISH
œ❷
To the X Column
For example, to block viewing of programming rated 14+ and 18+ :
➛❿
To turn on the lock
œ❷
To the 18+ Column
To turn on the lock
X
NC-17
R
PG-13
PG
G
NR
➛❿
œ❷
To the 14+ Column
FINISH
➛❿
œ❷
To turn on the lock
To FINISH
œ❷
➛❿
œ❷
➛❿
To the NC-17 Column
To turn on the lock
To FINISH
To save settings and exit
➛❿
• For instructions on “Set Canadian Ratings FRE (in French)”, please see page 27 in the French side of
this user’s guide.
To save settings and exit
27
26
Download from Www.Somanuals.com. All Manuals Search And Download.
V-Chip
V-Chip
Unrated Programs
Set Lock Code
Notes About Unrated Programs:
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set
with a Lock Code of "0000". You may change the code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming" category.
Press the MENU button
Examples of Unrated programs:
œ❷
To SET LOCK CODE
To operate
➛❿
Emergency Bulletins
Locally Originated Programming
News
Political Programs
Public Service Announcements
Religious Programs
Sports
The padlock icon
appears
Press ZERO to access the Lock Code
LOCK CODE
000
0
FINISH
The first digit will be highlighted
Weather
Some Commercials
• TV programs or movies that do not have rating signals will be blocked if the Unrated Category is
set to BLOCK.
➛❿
œ❷
To select the number
To move to the next digit
Directions to Block Unrated Programs:
You can block programs that are not rated.
Press the MENU button
Continue to follow these directions for all four numbers
œ❷
To FINISH
➛❿
To save settings and exit
œ❷
To V-CHIP
Your Lock Code is now set.
➛❿
To operate (The lock icon
appears)
Press ZERO to access V-Chip setup options
To UNRATED
œ❷
UNRATED
VIEW
BLOCK
➛❿
To VIEW or BLOCK
Press EXIT when done
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Settings
Picture Settings
Tint
Noise Muting
Tint allows you to adjust the levels of red and green in your TV picture.
This feature inserts a blank blue screen over channels which are not broadcasting or are too weak
to be received clearly.
Press the MENU button
œ❷
To TINT
Press the MENU button
❿
➛
œ❷
To increase the levels of green
œ❷
To NOISE MUTING
To increase the levels of red
To move to the next setting
➛❿
To turn Noise Muting ON or OFF
• Noise Muting will not work during Auto Tuner Setup or when you operate Channel Summary.
Color
The color function lets you make all the colors in the TV picture appear either more vivid or subtle.
Set Video Status
Press the MENU button
With Set Video Status, you can save your own set of picture quality adjustments as “Choice” and
have access to them at the touch of a button.
œ❷
To COLOR
❿
➛
œ❷
To make the colors more vivid
Press the MENU button
To make the colors more subdued
To move to the next setting
œ❷
To SET VIDEO STATUS
To operate
➛❿
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or
brighter picture overall.
TINT
COLOR
PICTURE -------------
-------------
|
-------------
-------------
-------------
-------------
|
Press the MENU button
|
BRIGHT
DETAIL
-------------
|
-------------
œ❷
To PICTURE
-------------
|
-------------
❿
To increase the level of contrast
➛
œ❷
To decrease the level of contrast
To move to the next setting
SAVE AS CHOICE
➛❿
To set the TINT levels
Bright
œ❷
To move to the next option
You can adjust the overall brightness of the TV picture with the Bright control.
Repeat these steps until all levels are set.
Press the MENU button
œ❷
To SAVE AS CHOICE
œ❷
To BRIGHT
❿
To lighten the picture
➛❿
To save settings and exit
➛
œ❷
To darken the picture
To move to the next setting
• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your preferences
will not be saved.
• You can access your “Choice” settings at any time by pressing the VIDEO STATUS button on the
remote control.
Detail
The Detail feature adjusts the level of fine detail displayed in the picture.
Press the MENU button
NOTES:
œ❷
To DETAIL
The setting screen will disappear if you do not make any adjustments or move to the next setting in
approximately three seconds. Any changes you have made to picture settings up to that point will
be stored. You can exit the Picture Settings menu at any time by pressing the EXIT button on the
remote control.
❿
➛
œ❷
To make the picture sharper (more details)
To make the picture smoother (less detail)
To move to the next setting
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Settings
Sound Settings
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice in what
you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may
Bass
You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass adjustment.
Press the MENU button
also include a Second Audio Program (SAP).
Press the MENU button
œ❷
To BASS
❿
➛
To increase the bass
To decrease the bass
œ❷
To MTS
➛❿
Select the mode
œ❷
To move to the next setting
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
Treble
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in STEREO
mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
Use Treble to adjust the level of high-frequency sound in your TV’s audio.
Press the MENU button
œ❷
To TREBLE
❿
➛
To increase the treble
To decrease the treble
To move to the next setting
TV Speaker
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio
through your stereo.
œ❷
Press the MENU button
Balance
Adjust the level of sound between the TV’s two speakers with the Balance setting.
œ❷
To TV SPEAKER
Press the MENU button
TV SPEAKER
ON
OFF
œ❷
To BALANCE
❿
➛
To shift the balance towards the right speaker
➛❿
To turn the TV's speakers ON or OFF
EXIT when finished
To shift the balance towards the left
speaker
œ❷
To move to the next setting
• Before you turn the TV Speaker setting from OFF to ON, make sure that the TV volume level is low!
If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV Speaker settings will return to “ON”.
NOTE:
NOTE:
• External Speakers: When using external speakers or amplifiers, shut off the TV Speakers
(see ‘TV Speakers’) above.
You can leave the Sound Settings menu at any time by pressing the EXIT button on the remote control.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
General Items
General Items
Auto Clock Set
Manual Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set
your clock using the XDS time signal broadcast by most Public Broadcasting stations. To set the
clock using the XDS signal:
To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock
menu and follow the steps below.
œ❷
➛❿
➛❿
To SET CLOCK
To operate
Enter the channel number of your local PBS station
Press MENU
To MANUAL
œ❷
To SET CLOCK
To operate
➛❿
MODE
TIME
AUTO
MANUAL
--:-- --
➛❿
To AUTO
MODE
AUTO
MANUAL
EASTERN
START CLOCK
TIME ZONE
D.S.T.
ON
OFF
œ❷
To move to the hour
➛❿
œ❷
To set the hour
FINISH
To move to minutes
➛❿
œ❷
To set the minutes
œ❷
To TIME ZONE
To move to START CLOCK
➛❿
To select your time zone
➛❿
To start clock and exit
ATLANTIC
CENTRAL
EASTERN
HAWAII
MOUNTAIN
ALASKA
PACIFIC
THANK YOU !!
œ❷
➛❿
œ❷
➛❿
To move to Daylight Savings Time (D.S.T.)
To turn D.S.T. ON or OFF
To FINISH
To save settings and exit
• If you do not have a PBS station in your local area, you will have to set the clock manually. See
‘Manual Clock Set’ at the top of the next page for instructions.
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The
clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back
one hour at 2:00 am on the last Sunday in October.
NOTES:
You will have to reset the clock after a power interruption of 90 seconds or longer. You must set the
clock before operating any timer functions.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
General Items
General Items
Closed Caption
On/Off Timer
Use this function to display the Closed Captioning text onscreen (when included in a broadcast).
The On/Off timer lets you program your television to turn itself on or off. You can use it as an alarm
to wake up, to help you remember important programs, or as a decoy when you're not home.
Press the MENU button
Press the MENU button
œ❷
To CLOSED CAPTION
To operate
➛❿
œ❷
To ON/OFF TIMER
➛❿
To operate (begins with ON TIME)
MODE
:
CAPTION
➛❿
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
CAPTION
TEXT
:
:
CC1 CC2 CC3 CC4
T1 T2 T3 T4
❷
➛❿
To set the minutes
FINISH
❷
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
❷
To accept OFF TIME and move to
CHANNEL
➛❿
œ❷
To select CAPTION, TEXT, or OFF
To move to CAPTION or TEXT
➛❿
To select channel
To move to MODE
➛❿
œ❷
To select a caption (CC1 to CC4) or text channel (T1 to T4)
To accept that selection and move to FINISH
❷
➛❿
To save settings and exit
➛❿
Choose ONCE or EVERYDAY
To ON/OFF TIMER
❷
Background
➛❿
Choose YES to accept the timer setting, choose NO if you don't wish to accept
To FINISH
❷
This feature inserts either a black or clear background behind the onscreen menu displays.
➛❿
To save settings
Press the MENU button
œ❷
To BACKGROUND
Language
BACKGROUND
BLACK CLEAR
You can choose to view your onscreen menus in three languages: English, French, or Spanish.
Press the MENU button
➛❿
To turn Set Background to BLACK or CLEAR
EXIT when finished
œ❷
To LANGUAGE
➛❿
To choose a language
ENGLISH
FRENCH
SPANISH
EXIT when finished
NOTES:
• Closed Captions subtitles are usually found on closed caption channel CC1. Some programs may
include additional text information which is usually found on text channel T1. The other channels
are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are playing
a video tape.
NOTES:
• The On/Off time cannot be set to locked or guarded channels.
• In order for the On/Off timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
• Most broadcasts containing Closed Captioning will display a notice at the start of the program.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Button Functions
Menu
Video Status
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate the
onscreen menu system.
The VIDEO STATUS button gives you a choice of three TV picture display settings, including a
display of your own preferences.
• See individual topics (like “Set Video Status”) for specific information on using menus.
Standard - Resets the picture display to the factory settings.
Choice - Displays the setting levels you specified on the "Set Video Status" Menu (see page 31).
Game - Enhanced settings designed especially for video games.
Exit
Press the VIDEO STATUS button
Press the EXIT button to leave a menu screen.
Choice
Game
Standard
Display
The Display screen shows the current status of timers and inputs.
Press the DISPLAY button
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15
minutes, for a total time of up to 180 minutes.
07
NOW
12:20 PM
OFF
EVERYDAY
7:00 PM
Press the SLEEP TIMER button
SLEEP TIMER
ON/OFF TIMER
ON TIME
0 15 30 45 60 75 90 105 120 135 150 165 180
OFF TIME
10:00 PM
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
• The channel or AV input (Channel 07)
• The current time (12:20 pm)
GOOD NIGHT!!
PUSH SLEEP TIMER BUTTON
TO EXTEND.
• Sleep Timer status/minutes remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAY button changes the display mode:
You then have 20 seconds to press the Sleep Timer button to delay the shutoff for another 15 minutes.
Display
Time
Channel
Off
Hyper Surround
Display - Full screen shown above
Time - Shows the current time only
Available on model TM-2701SU only.
Creates a deep, three-dimensional sound effect by channeling the audio through the TV's front-firing
speakers. Press the HYPER SURROUND button to turn the effect on or off.
Channel - Shows the current channel
Off - Turns Display off
HYPER SURROUND
ON OFF
• You may also turn off the Display at any step by pressing EXIT
.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press MUTING and the
volume level will instantly go to zero. To restore the volume to its previous level, press MUTING again.
NOTE:
• Please note that if the Clock, Sleep Timer or On/Off Timer are not set, the Display screen will
show: "Clock Not Set", "Sleep Timer Off", and "On/Off Timer Off" respectively.
39
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Button Functions
100+ Button
VCR Buttons
Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124,
press100+, 2 (two), 4 (four).
You can use this remote control to operate the basic functions of your VCR. These functions include: play,
record, rewind, fast-forward, stop, pause, channel scan, TV / VCR, power on, and power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s
brand VCR, please see the code chart and instructions on page 17.
Return+
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
DVD Buttons
Return+ - Lets you program a specific channel to return to while scanning through the channels.
You can also use this remote control to operate the basic functions of your DVD player. These functions
include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power
off.
RETURN+ and hold for three seconds
Move the selector switch to DVD to operate.
RETURN CHANNEL
PROGRAMMED !
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 18.
Scan using the CHANNEL+/- buttons
RETURN+
TV/CATV Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate
the television’s built-in tuner. Move the switch to CATV to operate a cable box.
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The message
“RETURN CHANNEL CANCELLED!” will appear.
• See page 16 for information on programming your remote for cable box operation.
• Return+ works only with CHANNEL+/-. Pressing any number key will cancel Return+.
VCR/DVD Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control. Use the
VCR/DVD selector switch to choose either VCR or DVD operation.
Input
Selects the signal input source for the television: TV, for Antenna or Cable; Video 1; or Video 2, for
video devices like VCRs, DVD players, or camcorders.
• See pages 17 and 18 for information on programming your remote with VCR and DVD
operating codes.
INPUT
TV
VIDEO-1
VIDEO-2
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Search Codes
PROBLEMS
CHECK
Cable/Satellite Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
2) Press the TV POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press TV POWER, see if the CATV or Satellite box responds.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the
remote control which came with the equipment.
There is no picture
or sound
• The antenna could be disconnected.
• The input mode could be set improperly. See page 40.
• The tuner (Auto Tuner Setup) could be set improperly. See page 20.
• The TV station may be having difficulties. Check to see if other stations are working.
5) Press RETURN+ to exit.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
VCR Search Codes Function:
You cannot select a
certain channel
• You may be too far from the TV. You must be within 23 feet (7 meters).
• Make sure the channels have been programmed. See "Channel Summary", page 21.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 21.
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
2) Press the VCR POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press VCR POWER, see if the VCR responds.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 36.
• Check to see if the Sleep Timer was set. See page 39.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the
manufacturers remote control which came with the VCR.
5) Press RETURN+ to exit.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 34.
• There is a problem with the TV. Unplug the set and call for service.
The On Timer is
blinking
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
2) Press the DVD POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press DVD POWER, see if the DVD player responds.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 30.
• The Video Status mode may be turned to the wrong setting. See page 31.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use the
manufacturers remote control which came with the DVD player.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
5) Press RETURN+ to exit.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 37.
Stereo or bilingual
programs can't be
heard
• Make sure the MTS settings are correct. See "MTS" on page 33.
There is no sound
• The TV Speaker option may be turned off. See page 33.
from the TV's speakers
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds
the sound or picture become abnormal, this is fine.
The picture is
excessively bright
• Make sure the BNC connector box is properly connrcted to the TV.
• The television Video input jack(RCA) is not terminated.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
BNC connector box
BNC connection box installation
Bridge-connection
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the input signal is automatically
terminated.)
1
Illustration of TM-2701SU
3
IN
VIDEO
L
IN
IN
OUT
BNC
OUT
UDIO
A
Connector
OUT
Video
R
box
2
VIDEO
IDEO
VCR
Yellow
EQUIPMENT
IN
IN
L
L/ MONO
White
Red
1 Slide the claps on the BNC connector box into the slots at the back of the television
until it clicks into position.
2 Connect the cable out from the bottom of the BNC connector box into the Video Input
jack at the rear of the televition.
R
INPUT
S-VIDEO
OVER
75Ω
(VHF/UHF)
VIDEO
L/ MONO
R
A
U
D
I
O
O
U
T
L
R
Audio
3 Use the BNC connectior box as the input jask for the television for any video-in connec-
tions.
1 Connect a white audio cable from the VCR Left Audio output the TV's Left Audio input
jack.
2 Connect the red audio cable from the VCR Right Audio output the TV's Right Audio
input jack.
3 Connect the video cable (BNC) from the VCR output into the input of the BNC connec-
tor box.
TM-2001U
Rear panel
NOTICE
CONNECT THE BNC CONNECTOR
BOX (AUTO TERMINATION). THIS
VIDEO-IN JACK (RCA) IS
NOT
TERMINATED 75
Ω
IN
4 You can send the video signal from the VCR to another pice of video equipmnt by
plugging a cable into the output jack of the BNC connector box.
OUT
TM-2701SU
Rear panel
INPUT
NOTICE
CONNECT THE BNC CONNECTOR
BOX (AUTO TERMINATION). THIS
VIDEO-IN JACK (RCA) IS
NOT
S-VIDEO
TERMINATED 75
Ω
OVER
75Ω
(VHF/UHF)
AUDIO OUT
VIDEO
L/ MONO
R
IN
L
OUT
R
45
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
TM-2001U
TM-2701SU
Reception Format
Reception Range
NTSC, BTSC System (Multi-Channel Sound)
VHF 2 to 13, UHF 14 to 69
Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Power Source
AC 120V, 60Hz
Power
Consumption
87W / 1.4A
113W / 1.8A
Screen Size
20 inch / 51 cm
measured diagonally
full square
27 inch / 68 cm
measured diagonally
full square
Audio Output
Speakers
1W + 1W
1.2W + 1.2W
2 x 3 1/2 / 5x9 cm
oval x 2
Antenna Terminal
75 ohms (VHF/UHF) (F-type connector)
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
JVC PROFESSUONAL PRODUCTS COMPANY
Division of JVC Americas Corp.
1700 Valley Road
------
Variable Audio
Output
More than 0 to 1550 mVrms (+6 dBs)
Low impedance (400 Hz when modulated 100%)
------
Wayne, New Jersey, 07470
Headphone Jack
Ø3.5 mm x 1
------
Dimensions (In)
WxHxD (cm)
19 7/8 x 17 7/8 x 19 1/2
50.3 x 45.2 x 49.3
25 3/4 x 23 3/8 x 19 1/2
65.4 x 59.3 x 49.4
Weight (lbs / kg)
43.8 / 19.9
68.5 / 31.1
Accessories
Remote control unit x 1 / AA batteries x 2 / BNC connector box x 1
Specifications subject to change without notice.
46
LCT1059-001A-A
0801-A-JII-JIM
Download from Www.Somanuals.com. All Manuals Search And Download.
|