JVC CRT Television AV 20FA44 User Manual

Color Television Users Guide

For Model:

AV-20FA44

Illustration of AV-20FA44 and RM-C1251G

Important Note:

In the spaces below, enter the model and serial number of your television (located at the

rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this

guide. Keep this user's guide in a convenient place for future reference. Keep the carton and

original packaging for future use.

Model Number:

LCT1466-001B-A

0803-KG-II-IM

Serial Number:

Download from Www.Somanuals.com. All Manuals Search And Download.

• As an “ENERGY STAR^®” partner, JVC has determined

that this product or product model meets the “ENERGY

STAR^®” guidelines for energy efficiency.

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to

assure your personal safety. But improper use can result in potential electrical shock or fire hazards.

In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its

installation, use and servicing. Also follow all warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one blade of the

plug is wider than the other). This safety feature allows the plug to fit

into the power outlet only one way. Should you be unable to insert the

plug fully into the outlet, try reversing the plug. Should it still fail to fit,

contact your electrician.

(POLARIZED-TYPE)

2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating

instructions for this information. If you are not sure of the type of power supply to your home, consult your

TV set dealer or local power company. For battery operation, refer to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken

plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord

is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built-up static charges. Section 810 of the National Electrical

Code provides information with respect to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge

unit, connection requirements for the grounding electrode.

Download from Www.Somanuals.com. All Manuals Search And Download.

ANTENNA

LEAD IN

WIRE

7 An outside antenna system

should not be located in the

vicinity of overhead power

lines or other electric light

or power circuits, or where it

can fall into such power lines

or circuits. When installing

an outside antenna system,

extreme care should be taken

to keep from touching such

power lines or circuits as

contact with them might be

fatal.

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRICAL

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ARTICLE 250, PART H)

NEC - NATIONAL ELECTRIC CODE

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be

released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.

— Never cover the openings with a cloth or other material.

— Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer.

— Do not try to roll a cart with small casters across thresholds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit

approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some

internal parts carry hazardous voltages and contact can result in a fire or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may result

in a hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

PORTABLE CART WARNING (Symbol provided by RETAC)

13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for

an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent

damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the

following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the TV set.

C. If the TV set has been exposed to rain or water.

D. If the TV set does not operate normally by following the operating instructions. Adjust only those

controls that are covered in the operating instructions as improper adjustment of other controls may

result in damage and will often require extensive work by a qualified technician to restore the TV set to

normal operation.

E. If the TV set has been dropped or damaged in any way.

F. When the TV set exhibits a distinct change in performance — this indicates a need for service.

16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17 When replacement parts are required, have the service technician verify in writing that the replacement

parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified

replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform the

safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube

implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Quick Setup . . . . . . . . . . . 7

Button Functions . . . . . . . 39

Unpacking your TV . . . . . . . . . . . . 7

TV Model . . . . . . . . . . . . . . . . 8

TV Remote Control . . . . . . . . . . . 9

Getting Started . . . . . . . . . . . . . 10

The Remote Control . . . . . . . . . . 10

Connecting Your Devices . . . . . . . 11

Interactive Plug In Menu . . . . . . . . 15

Power . . . . . . . . . . . . . . . . . . 39

Number Buttons . . . . . . . . . . . . . 39

100+ Button . . . . . . . . . . . . . . . 39

Channel +/– . . . . . . . . . . . . . . . 39

Volume +/– . . . . . . . . . . . . . . . 39

Muting . . . . . . . . . . . . . . . . . . 39

Menu . . . . . . . . . . . . . . . . . . 39

Exit . . . . . . . . . . . . . . . . . . . 39

Return + . . . . . . . . . . . . . . . . . 40

Input . . . . . . . . . . . . . . . . . . . 40

Display . . . . . . . . . . . . . . . . . 41

Sleep Timer . . . . . . . . . . . . . . . 41

Sound . . . . . . . . . . . . . . . . . . 42

C.C. . . . . . . . . . . . . . . . . . . . 42

Video Status . . . . . . . . . . . . . . . 43

TheaterPro D6500K . . . . . . . . . . . 43

Aspect . . . . . . . . . . . . . . . . 43

Light . . . . . . . . . . . . . . . . . . . 43

TV/CATV Slide Switch . . . . . . . . . . 44

VCR/DVD Slide Switch . . . . . . . . . 44

VCR Buttons . . . . . . . . . . . . . . . 44

DVD Buttons . . . . . . . . . . . . . . . 44

Remote Programming . . . . . 18

Setting CATV, VCR and DVD Codes . . . 18

CATV or Satellite Codes . . . . . . . . 18

VCR Codes . . . . . . . . . . . . . . 19

DVD Codes . . . . . . . . . . . . . . 20

Search Codes . . . . . . . . . . . . . 21

Onscreen Menus . . . . . . . . 22

Using the Guide . . . . . . . . . . . . . 22

Onscreen Menu System . . . . . . . . . 23

Initial Setup . . . . . . . . . . 24

Auto Tuner Setup . . . . . . . . . . . . 24

Channel Summary . . . . . . . . . . . . 24

V-Chip . . . . . . . . . . . . . . . . . . 25

Set Lock Code . . . . . . . . . . . . . 31

Language . . . . . . . . . . . . . . . . 32

Closed Caption . . . . . . . . . . . . . 32

Front Panel Lock . . . . . . . . . . . . 33

Auto Shut Off . . . . . . . . . . . . . . 33

XDS ID . . . . . . . . . . . . . . . . . 33

Appendices . . . . . . . . . . 45

Troubleshooting . . . . . . . . . . . . . 45

Warranty . . . . . . . . . . . . . . . . . 46

Authorized Service Centers . . . . . . . 48

Specifications . . . . . . . . . . . . . . 49

Notes . . . . . . . . . . . . . . . . . 50

Picture Adjust . . . . . . . . . 34

Picture Settings . . . . . . . . . . . . . 34

Adjust Picture Settings . . . . . . . . . 34

Color Temperature . . . . . . . . . . . . 35

Noise Muting . . . . . . . . . . . . . . 35

VSM . . . . . . . . . . . . . . . . . 35

Sound Adjust . . . . . . . . . 36

Sound Settings . . . . . . . . . . . . . 36

Adjust Sound Settings . . . . . . . . . 36

MTS (Multi-channel Sound) . . . . . . . 36

Clock Timers . . . . . . . . . . 37

Set Clock . . . . . . . . . . . . . . . . 37

On/Off Timer . . . . . . . . . . . . . . . 38

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Unpacking Your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new

television, please check to make sure you have all of the following items. In addition to this

guide, your television box should include:

Two AA

Batteries

1 Remote Control

1 Television

TV CATV VCR DVD

POWER

INPUT

DISPLAY

SLEEP TIMER

SOUND

RETURN+

VIDEO STATUS 100+

THEATER PRO ASPECT

LIGHT

C.C.

MUTING

VOL

–

VOL

–

EXIT

VCR CHANNEL VCR/DVD

TV/VCR

PREV NEXT

POWER

REW

REC

PLAY

STOP

PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1251G

POWER

Once you have unpacked your television, the next step is to connect it to your antenna/

cable or satellite system and to connect the audio/video devices you want to use with your

television. To make these connections you will use plugs like the ones illustrated below.

Component Cables

Composite Cables

Audio Cables

Coaxial Cables

Used to connect an external

antenna or cable TV system to your

TV.

Used to connect audio/video

devices like VCRs, DVD players,

stereo amplifiers, game consoles,

etc.

S-Video Cable

Used to make video connections

with S-Video VCRs, Camcorders

and DVD players.

We recommend that before you start using your new television, you read your entire User’s

Guide so you can learn about your new television’s many great features. If you’re anxious to

start using your television right away, a quick setup guide follows on the next few pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Model

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Rear Panel Diagram

MODEL :

AV-20FA44

Front Panel Diagram

INPUT

CHANNEL

OPERATE

VOLUME

VIDEO

MONO AUDIO

MODEL: AV-20FA44

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Remote Control

POWER

TV CATV VCR DVD

INPUT

DISPLAY

SLEEP TIMER

SOUND

RETURN+

100+

VIDEO STATUS

THEATER PRO

ASPECT

LIGHT

C.C.

MUTING

CH +

VOL

–

CH –

EXIT

VCR/DVD

POWER

VCR CHANNEL

PREV NEXT

TV/VCR

REW

REC

PLAY

STOP

PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1251G

MODEL:

AV-20FA44

• For information on remote control buttons, see pages 39 - 45.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you

need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult

other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first need to install the batteries (included).

Lift and pull the latch on the back of the

remote control to open. Insert two batteries

(included) carefully noting the “+” and “–”

markings, placing the “–” end in the unit first.

Snap the cover back into place.

When you change the batteries, try to

complete the task within three minutes.

If you take longer than three minutes,

the remote control codes for your VCR,

DVD, and/or cable box/satellite receiver

may have to be reset. See pages 18 - 20.

Key Feature Buttons

The four key feature buttons at the center of the remote

can be used for basic operation of the television.

The top and bottom buttons will scan forward and

back through the available channels. To move rapidly

through the channels using JVC’s Hyperscan feature,

press and hold CH+ or CH–. The channels will zip by

at a rate of five channels per second. The right and left

buttons will turn the volume up or down. These buttons

are also marked with four arrows and are used with

JVC’s onscreen menu system. To use the onscreen

menus, press the M^ENUbutton.

MUTING

C.C.

CH +

VOL

–

CH –

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Basic Operation

Turn the television on and off by pressing the POWER button at the top right

corner of the remote. If this is the first time you are turning on the TV, the

interactive plug-in menu appears.

POWER

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if

you need to operate a cable box.

TV CATV

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to

DVD to control a DVD player. Please see pages 18 to 20 for instructions on

programming your remote control to operate a cable box, VCR or DVD player.

VCR DVD

Step 2 – Connecting Your Devices

Please follow the flow chart below to determine which connection setup is right for you. Then,

refer to the appropriate diagrams to connect your television to other devices that you may

have. After you are finished connecting your devices, plug the power cord into the nearest

power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the

television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

Do you use a Cable TV Box?

Yes

Do you have a VCR?

Yes

Diagram #2 Diagram #1

Diagram #3 Diagram #1

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Diagram #1

Illustration of AV-20FA44

Cable or Antenna

Output

TV Rear Panel

Coaxial Cable

OUT IN

Cable Box

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of

the TV.

Diagram #2

Illustration of AV-20FA44

Cable or Antenna

Output

TV Rear Panel

Coaxial Cable

VCR

OUT

Cable Box

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’s

LEFT AUDIO INPUT.

• Use the S-Video connection if possible for superior picture quality.

• Your VCR must be turned on to view premium cable channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary

colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete

one set of connections (DVD or audio output) before starting the other to avoid accidentally

switching the cables.

• If you use INPUT 2 (Component-In), for a DVD connection, you must select

"V2-COMPONENT" by pressing the I^NPUTbutton, for proper display of the DVD signal.

• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with

this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.

Diagram #3

Illustration of AV-20FA44

Cable or Antenna

Output

VCR

OUT

Coaxial Cable

OUT

TV Rear Panel

DVD Player (OPTIONAL)

Green

Blue

Red

AUDIO OUT

OUT

Connecting to an External Amplifier

Illustration of AV-20FA44

Speaker

Amplifier

TV Rear Panel

1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to

the LEFT AUDIO INPUT on the amplifier.

2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to

the RIGHT AUDIO INPUT on the amplifier

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using

the front input jacks (Input 3) located under the front panel door. To access, push on the door

to open it. You can also connect these using the television’s rear input jacks, using the same

instructions.

Illustration of AV-20FA44

INPUT

CHANNEL

OPERATE

VOLUME

VIDEO

MONO AUDIO

Camcorder

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the front of the TV.

2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the

LEFT AUDIO IN on the front of the TV.

3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the

RIGHT AUDIO IN on the front of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

LEFT AUDIO IN.

Headphone Connection

You can connect a pair of headphones to the television using the headphone jack located under

the front panel door. To access, push on the door to open it.

1) Plug a headphone jack into the headphone jack on the television’s front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Step 3 – The Interactive Plug In Menu

When you turn your television on for the first time the interactive plug-in menu will appear. The

plug-in menu helps you to get your TV ready to use by letting you set your preferences for:

• The language in which you want the onscreen menus to appear.

• Setting the TV’s clock to the correct time so your timer functions will work properly. You can

choose “AUTO” or “MANUAL” for setting the clock.

• The auto tuner setup of which channels you wish to receive.

We recommend you complete the interactive plug-in items before you start using your

television.

Language

After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically

switches to the LANGUAGE settings. You can choose to view your onscreen menus in three

languages: English, French (Français) or Spanish (Español).

√®

To choose a language:

(English, Français or Español)

I N T E R A C T I V E P L U G I N M E N U

L A N G U A G E / L A N G U E / I D I O M A

†

To NEXT (To set clock)

E N G L I S H

N E X T

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

(To be continued...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely

set your clock using the XDS time signal broadcast by most public broadcasting stations. If you

do not have this in your area, you will have to set the clock manually. See manual clock set

below. To set the clock using the XDS signal:

√®

†

To choose AUTO

To TIME ZONE

I N T E R A C T I V E P L U G I N M E N U

S E T C L O C K

M O D E

A U T O

√®

To select your time zone:

(Atlantic, Eastern, Central, Mountain, Pacific,

Alaska or Hawaii)

T I M E Z O N E

D . S . T .

P A C I F I C

O F F

N E X T

†

To move to D.S.T. (Daylight Savings Time)

To turn D.S.T. ON or OFF

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

√®

†

To NEXT (To Auto Tuner Setup)

Notes:

• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.

The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will

move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose

AUTO, see auto clock set above.

√®

†

To choose MANUAL

To TIME

I N T E R A C T I V E P L U G I N M E N U

S E T C L O C K

M O D E

T I M E

M A N U A L

√®

†

To set the hour

To minute

– – : – – – –

√®

†

To set the minute

To START CLOCK

S T A R T C L O C K

B Y

S E L E C T

E X I T

E X I T B Y

O P E R A T E B Y

Note:

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

(To be continued...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the

active ones and skipping over blank ones or channels with weak signals. This means when you

scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.

√®

To choose CABLE or AIR (or SKIP when you

skip Auto Tuner Setup)

I N T E R A C T I V E P L U G I N M E N U

A U T O T U N E R S E T U P

†

To START

T U N E R M O D E

C A B L E

NOW

S T A R T

S E L E C T

B Y

PROGRAMMING !

E X I T

O P E R A T E B Y

E X I T B Y

Programming will take

approximately 1 to 2

minutes.

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your

quick setup is now complete. You can now begin watching your television, or you can continue

on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

• Noise muting will not work during Auto Tuner Setup.

• Skip appears only for interactive plug-in menu.

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case, use the initial setup menu to perform these settings. See pages 33, 38 and 25.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending

on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is

normal.

The Quick Setup is complete

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD

player by using the instructions and codes listed below. If the equipment does not respond to

any of the codes listed below or to the code search function, use the remote control supplied

by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off,

channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does

not respond to any code, try the search codes function, on page 21.

Cable Box

ABC

CODES

024

Cable Box

Puser

CODES

032

Digital

Satellite

Systems

CODES

Archer

032, 025

051, 032

022, 051

058, 059

024, 032, 025

029

RCA

061, 070

032

Echostar

100, 113, 114,

115

Cableview

Citizen

Realistic

Regal

058, 064, 040,

041, 042, 045,

068

Express VU

G.E.

100, 113

Curtis

106

Diamond

Eagle

Regency

034

G.I.

108

Rembrandt

037, 032, 051,

038

Gradiente

Hitachi

112

Eastern

GC Brand

Gemini

034

032, 051

022, 043

104, 111

Samsung

051

HNS (Hughes)

Scientific Atlanta 057, 058, 059

104

General Instrument 065, 024, 025,

026, 027, 020,

021, 022, 057,

SLMark

051, 047

051, 056

032, 051

Panasonic

Philips

105

Sprucer

Stargate

102, 103

023

Primestar

108

Hamlin

040, 041, 042,

045, 058, 064

049, 024

Telecaption

Teleview

Texscan

Tocom

067

Proscan

RCA

106, 109, 110

Hitachi

Jerrold

047, 051

044

065, 024, 025,

026, 027, 020,

021, 022, 057,

023

Sony

107

035, 036, 066

050

Star Choice

104, 108

Toshiba

Unika

Toshiba

Uniden

101

Macom

049, 050, 051,

054

102, 103

032, 025

Universal

Videoway

Viewstar

Zenith

022, 032

052

Magnavox

033

030

Memorex

Movietime

029, 030

063, 046

046

032, 051

039, 037, 048

Oak

Panasonic

055, 056, 060,

071, 073

Zenith/Drake

Satellite

Paragon

Philips

063

028, 029, 030,

052, 053, 031,

069

Pioneer

Pulsar

047, 062

051, 032

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,

rewind, pause, record, channel up/down operation.

1) Find the VCR brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the VCR.

• If your VCR does not respond to the first code, try the others listed. If it does not respond to

any of the codes, try the search codes function on page 21.

• After you program your remote, some VCR buttons may not work properly. If so, use the

VCR’s remote.

• To record, hold down the REC button on the remote and press PLAY.

VCRs

CODES

035

027, 032, 095

VCRs

CODES

VCRs

CODES

Admiral

Aiwa

Marantz

Marta

003, 004, 005

064

Samsung

037, 060, 062,

033, 089

Samtron

Sansui

089

Akai

029, 072, 073, Memorex

074

024, 067

003, 026, 020,

052

038, 040, 047,

048, 041, 042

MGA

Audio Dynamic 003, 005

Sanyo

Scott

063, 067, 091,

071

Bell & Howell

Broksonic

Canon

063, 071

020, 026, 094

023, 025

043

Minolta

058, 045, 093

Mitsubishi

038, 040, 047,

048, 041, 042,

078, 090

059, 060, 062,

067, 038, 040,

047, 048, 026,

020

CCE

Multitech

NEC

047, 027, 062

Citizen

064

003, 004, 005,

000

Sears

063, 064, 065,

066, 058, 000,

001

Craig

063, 029, 064

Curtis Mathes

045, 024, 027,

093

Olympic

024, 023

Shintom

Sharp

075

Optimus

028, 021, 035,

064

Daewoo

043, 059, 024,

092

035, 036, 080,

088

026, 020

Orion

DBX

003, 004, 005

Panasonic

023, 024, 021,

022

Signature 2000 027, 035

Dimensia

Emerson

045, 093

Singer

Sony

075

043, 026, 077,

061, 025, 042,

020, 076

Penney

024, 058, 045,

063, 003, 004,

005, 093

028, 029, 030,

053, 054, 055

SV 2000

Sylvania

027

Fisher

Funai

063, 066, 067,

065, 071, 091

Pentax

Philco

058, 005, 045,

093

031, 023, 024,

027

027, 026, 020,

000

031, 024, 027,

023, 026, 020,

043

Symphonic

Tashiro

Tatung

027, 081

064

033, 045, 024

G.E.

Philips

031, 023, 024,

086

003, 004, 005

Go Video

037, 051, 049,

050, 089

Teac

003, 004, 027,

005

Pioneer

Proscan

023

Goldstar

064

045, 058, 023,

024, 031, 046,

059, 060, 033,

087, 093

Technics

021, 022, 023,

024

Gradiente

083, 084, 081,

000, 001

Teknika

Toshiba

024, 027, 070

059, 046, 079

Hitachi

023, 045, 058,

027, 081, 093

Quasar

021, 022, 023,

024

Vector Research 005

Instant Replay 024, 023

Wards

Yamaha

Zenith

035, 036, 067,

044, 064

Radio Shack

033, 024, 063,

036, 067, 040,

027

Jensen

JVC

003

000, 001, 002,

003, 004, 005

063, 003, 004,

005

033, 045, 058,

023, 024, 031,

046, 059, 060,

083, 084, 085,

087, 093

RCA

Kenwood

LXI

003, 004, 064,

005

044, 082, 064,

094

027, 064, 058,

065, 066, 063,

067

Realistic

024, 063, 036,

067, 040, 027

Magnavox

031, 023, 024,

086

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,

rewind, previous/next chapter, tray open/close, and still/pause operation.

1) Find the DVD player brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the DVD player.

• If your DVD player does not respond to the first code, try the others listed. If it does not

respond to any of the codes, try the search codes function on page 21.

• After you program your remote, some DVD buttons may not work properly. If so, use the DVD

player’s remote.

DVD Player

Aiwa

CODES

043

DVD Player

RCA

CODES

021, 026

Apex

040

Sampo

Samsung

Sharp

034

030

028

038

Denon

Hitachi

JVC

020, 037

030, 031

000

Silvania

Sony

Kenwood

Konka

035

024, 045, 046,

047

039

Mitsubishi

Onkyo

Oritron

Panasonic

Philips

Pioneer

Raite

025

Technics

Toshiba

Vialta

020

041

023

044

050

020

Wave

042

023, 036

022

Yamaha

Zenith

020

027, 032

033

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

Search Codes

Cable/Satellite Search Codes Function

1) Slide the first 2-Way Mode Selector switch to CATV.

2) Press and hold down the P^OWERbutton, then press the RETURN+ button for more than three

seconds.

3) Release the R^ETURN+ button, then release the POWER button.

4) Press the POWER button on the remote, and see if the cable or satellite box responds.

5) If there was a response, press R^ETURN+. The codes are now set. If there was no

response, repeat Step 4. If you repeat Step 4 a total of 80 times without a response, use

the remote control that came with your equipment.

6) Press R^ETURN+ to exit.

VCR/DVD Search Codes Function

1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or

“DVD”.

2) Press and hold down the VCR or DVD P^OWERbutton, then press the RETURN+ button for

more than three seconds.

3) Release the R^ETURN+ button, then release the VCR or DVD POWER button.

4) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

5) If there was a response, press RETURN+. The codes are now set. If there was no

response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (40 times for

the DVD player), and there is no response, use the remote control that came with your

equipment.

6) Press R^ETURN+ to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your

new television. The ones you will see most frequently are:

π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–

buttons let you:

• Move vertically in a main menu screen

• Move through a submenu screen

• Move to the next letter, number, or other choice in a submenu

• Back up to correct an error

• Scan through TV channels (when not in a menu screen)

√® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right

to:

• Select a highlighted menu item

• Select an item in a submenu

• Select numbers in certain menu options

• Turn the volume up or down (when not in a menu screen)

The “press button” icon means you should press the button named on your remote

control. (Button names appear in SMALL CAPITAL LETTERS.)

The “helping hand” icon points to the highlighted or selected item in a menu.

To bring up the onscreen menu, press the MENU button on the remote control. The item

that appears in yellow is the one currently selected. If you press the MENU button again, the

onscreen display will skip to the next menu screen. If you use the Menu button on the TV’s

front panel instead of the remote, an additional menu screen showing input will appear. The

“interactive plug-in menu” will appear the first time the TV is plugged in.

I N I T I A L

S E T U P

P R E V I O U S

A U T O T U N E R S E T U P

C H A N N E L S U M M A R Y

V – C H I P

S E T L O C K C O D E

N E X T P A G E

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

Notes:

• Menus shown in this book are illustrations, not exact replications of the television’s onscreen

displays.

• If you do not press any buttons for a few seconds, the onscreen menu will automatically shut

off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

The Onscreen Menu System

Your television comes with JVC’s onscreen menu system. The onscreen menus let you make

adjustments to your television’s operation simply and quickly. Examples of the Onscreen

Menus are shown below. Detailed explanations on using each menu follow later in this guide.

For information about the interactive plug-in Menu, see pages 15 - 17.

Press the MENU button

I N I T I A L

S E T U P

I N I T I A L

S E T U P

P R E V I O U S

L A N G U A G E

P R E V I O U S

E N G . F R A N . E S P.

A U T O T U N E R S E T U P

C H A N N E L S U M M A R Y

V – C H I P

C L O S E D C A P T I O N

F R O N T P A N E L L O C K

A U T O S H U T O F F

X D S I D

O F F

O N

S E T L O C K C O D E

N E X T P A G E

S E L E C T

B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

E X I T

O P E R A T E B Y

E X I T B Y

INITIAL SETUP 01

INITIAL SETUP 02

C L O C K /

T I M E R S

P I C T U R E

A D J U S T

P R E V I O U S

T I N T

P R E V I O U S

S T A N D A R D

S E T C L O C K

O N / O F F T I M E R

C O L O R

P I C T U R E

B R I G H T

D E T A I L

C O L O R T E M P E R A T U R E

N E X T P A G E

L O W

N E X T P A G E

S E L E C T

B Y

R E S E T B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

E X I T

O P E R A T E B Y

E X I T B Y

CLOCK/TIMERS

PICTURE ADJUST 01

S O U N D

A D J U S T

P I C T U R E

A D J U S T

P R E V I O U S

N O I S E M U T I N G

V S M

S T A N D A R D

B A S S

O N

T R E B L E

B A L A N C E

M T S

S T E R E O S A P M O N O

N E X T P A G E

R E S E T B Y

S E L E C T

B Y

R E S E T B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

E X I T

O P E R A T E B Y

E X I T B Y

SOUND ADJUST

PICTURE ADJUST 02

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 17 as the interactive plug-in menu. If you

need to run the auto tuner setup again, follow the steps below.

Press the MENU button

I N I T I A L S E T U P

A U T O T U N E R S E T U P

π†

√®

†

To AUTO TUNER SETUP

To operate

T U N E R M O D E

C A B L E

To choose CABLE or AIR

To move to START

S T A R T

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

√®

To start Auto Tuner Setup

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the

message PROGRAMMING OVER! appears onscreen.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You

can add or delete channels from the line-up or prevent any unauthorized viewers from watching

any or all 181 channels.

Press the MENU button

π†

To CHANNEL SUMMARY

To operate

√®

The Channel summary screen will now be displayed with

the channels set to scan marked with an “√”. You can

delete channels from the scan by removing the “√”. If any

channels were missed during auto tuner setup and you

wish to add them, you may by placing an “√” next to the

channel number.

I N I T I A L S E T U P

C H A N N E L S U M M A R Y

1 0

π†

To the SCAN column

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

√®

To include or delete from scan

Press the EXIT button when finished

You can block access to a channel by activating the channel lock.

Press the MENU button

π†

√®

π†

To CHANNEL SUMMARY

To operate

To the Lock Column (

)

Press the ZERO button to lock or unlock that channel

Press the EXIT button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

To watch a channel that you have locked, enter the

Lock Code using the 10 key pad.

If the wrong code is entered, the message

“INVALID LOCK CODE!” will flash on the screen.

THIS CHANNEL IS LOCKED BY

CHANNEL GUARD.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

The channel cannot be accessed until the correct code

is entered.

NO. - - - -

Notes:

• Once a channel has been unlocked, it will remain unlocked until the television is turned off.

• See also “Set Lock Code”, page 31.

V-Chip

Your TV is equipped with V-Chip technology which enables you to block channels or content

that you feel to be inappropriate for children, based on US and Canada rating guidelines.

V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.

Note: Some programs, and movies are broadcast without a ratings signal. Even if you set

up V-CHIP ratings limits, these programs will not be blocked. See page 26 for information on

how to block unrated programs.

Note (for Canadian viewers): The V-Chip function is based on specifications designed for

the United States and therefore may not work properly in Canada.

You can customize the V-Chip settings of your television to match your personal tastes. The

V-Chip menu below is the starting point for your V-Chip settings

You can use US V-Chip settings (for programming broadcast from the United States), Canadian

V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any

or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each

of the three V-Chip formats appear in the next six pages along with descriptions of the rating

categories.

To access the rating categories:

I N I T I A L S E T U P

V – C H I P

Press the MENU button

V – C H I P

O F F

S E T U S T V R A T I N G S

S E T M O V I E R A T I N G S

π†

√®

To V-CHIP

To operate (Lock icon

will appear)

S E T C A N A D I A N R A T I N G S E N G

S E T C A N A D I A N R A T I N G S F R E

U N R A T E D

V I E W

Press ZERO to access the V-Chip menu

F I N I S H

√®

To turn V-Chip ON or OFF (V-Chip must be

turned ON for rating settings to operate)

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

π†

To move to SET US TV RATINGS,

SET MOVIE RATINGS, or SET CANADIAN RATINGS (see following pages for

descriptions of each item)

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Unrated Programs

Unrated programming refers to any programming which does not contain a rating signal.

Programming on television stations which do not broadcast rating signals will be placed in the

“Unrated Programming” category.

Examples of Unrated programs:

• Emergency Bulletins

• News

• Public Service Announcements

• Sports

• Locally Originated Programming

• Political Programs

• Religious Programs

• Weather

• Some Commercials

Note:

• TV programs or movies that do not have rating signals will be blocked if the unrated category

is set to BLOCK.

Directions to Block Unrated Programs

You can block programs that are not rated.

I N I T I A L S E T U P

V – C H I P

Press the MENU button

V – C H I P

O F F

π†

To V-CHIP

S E T U S T V R A T I N G S

S E T M O V I E R A T I N G S

√®

To operate (The lock icon

appears)

S E T C A N A D I A N R A T I N G S E N G

S E T C A N A D I A N R A T I N G S F R E

U N R A T E D

V I E W

Press ZERO to access V-Chip setup options

F I N I S H

π†

To UNRATED

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

√®

To VIEW or BLOCK

Press EXIT when done

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

US V-Chip Ratings

U.S. PARENTAL RATING SYSTEMS

Programs with the following ratings are appropriate for children.

ꢀ

TV Y is Appropriate for All Children

Programs are created for very young viewers and should be suitable for all ages, including

children ages 2 - 6.

TV Y7 is for Older Children

Most parents would find such programs suitable for children 7 and above. These programs

may contain some mild fantasy violence or comedic violence, which children should be

able to discern from reality.

Programs with the following ratings are designed for the entire audience.

ꢀ

TV G stands for General Audience

Most parents would find these programs suitable for all age groups. They contain little or

no violence, no strong language, and little or no sexual dialog or situations.

ꢀ

TV PG Parental Guidance Suggested

May contain some, but not much, strong language, limited violence, and some suggestive

sexual dialog or situations. It is recommended that parents watch these programs first, or

with their children.

ꢀ

TV 14 Parents Strongly Cautioned

Programs contain some material that may be unsuitable for children under the age of 14

including possible intense violence, sexual situations, strong coarse language, or intensely

suggestive dialog. Parents are cautioned against unattended viewing by children under 14.

TV MA Mature Audiences Only

These programs are specifically for adults and may be unsuitable for anyone under 17

years of age. TV MA programs may have extensive V, S, L, or D.

Viewing Guidelines

In addition to the ratings categories explained above, information on specific kinds of content

are also supplied with the V-Chip rating. These types of content may also be blocked. The

content types are:

• V/FV is for VIOLENCE/FANTASY VIOLENCE

• S stands for SEXUAL CONTENT

• L stands for strong LANGUAGE

• D stands for suggestive DIALOG

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Setting US V-Chip Ratings

Press the MENU button

I N I T I A L S E T U P

V – C H I P

O F F

π†

√®

To V-CHIP

To operate (lock icon

S E T U S T V R A T I N G S

S E T M O V I E R A T I N G S

appears)

S E T C A N A D I A N R A T I N G S E N G

S E T C A N A D I A N R A T I N G S F R E

Press Z^EROto access the V-Chip menu

U N R A T E D

V I E W

√®

π†

√®

To turn V-Chip ON or OFF

To move to SET US TV RATINGS

To operate

F I N I S H

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

Directions to set US V-Chip Ratings

Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and

press the or to move the cursor to the correct location. Press or to turn the locking

feature on or off. An item is locked if the icon appears instead of a “—”.

†

√

For example. To block viewing of all TV 14 shows, move the cursor to the top row of that

column and add a lock icon. Once you’ve put a lock on the top row, everything in that column

is automatically locked.

π†

√®

π†

√®

To the TV 14 Column

To turn on the lock

To FINISH

To save settings and exit

Press the EXIT button when finished

Note:

• If you want to change the setup, move the cursor to the top column and change the lock icon

to “—” by pressing or again. You may then select individual categories to block.

√

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Movies Ratings

ꢀ

NR – Not Rated

This is a film which has no rating. In many cases these films were imported from countries

which do not use the MPAA ratings system. Other NR films may be from amateur

producers who didn’t intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including children’s

programming, foreign programs, or adult material.

ꢀ

G – General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content,

violence, or language that would be unsuitable for audiences of any age.

PG – Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence,

some brief nudity, and strong language. The contents are not deemed intense.

PG-13 – Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating

may include more explicit sexual, language, and violence content than movies rated PG.

R – Restricted

These films contain material that is explicit in nature and is not recommended for

unsupervised children under the age of 17.

NC-17 – No One Under 17

These movies contain content which most parents would feel is too adult for their children

to view. Content can consist of strong language, nudity, violence, and suggestive or explicit

subject matter.

ꢀ

X – No One under 18

Inappropriate material for anyone under 18.

Directions to set Movie (MPAA) Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (Lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET MOVIE RATINGS

To enter movies menu

For example:

To block viewing of X and NC-17 rated from shows:

I N I T I A L S E T U P

S E T M O V I E R A T I N G S

V – C H I P

π†

√®

π†

To the X Column

^C-17

^G-13

To turn on the lock

To the NC-17 Column

To turn on the lock

F I N I S H

√®

π†

√®

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

To FINISH

To save settings and exit

Press the EXIT button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Canadian V-Chip Ratings

ꢀ

E – Exempt

Exempt programming includes: news, sports, documentaries and other information

programming, talk shows, music videos, and variety programming.

ꢀ

C – Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive

behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or

unrealistic in nature.

C8+ – Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low

intensity and will show the consequences of the acts. There will be no offensive language,

nudity or sexual content.

ꢀ

G – General Audience

Programming will contain little violence and will be sensitive to themes which could affect

younger children.

PG – Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger

children. Parents may consider some content not appropriate for children aged 8-13.

14+ – 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens

and early teens. Programming may contain mature themes and scenes of intense violence.

18+ – Adult

Material intended for mature audiences only.

Directions to set Canadian V-Chip Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET CANADIAN RATINGS ENG (for English)

To enter ratings menu

For example:

To block viewing of programming rated 14+ and 18+:

I N I T I A L S E T U P

S E T M O V I E R A T I N G S

V – C H I P

π†

√®

To the 18+ Column

To turn on the lock

14+

18+

π†

√®

π†

To the 14+ Column

To turn on the lock

To FINISH

F I N I S H

S E L E C T

B Y

√®

To save settings and exit

Press the EXIT button when finished

E X I T

E X I T B Y

O P E R A T E B Y

Note:

• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 30 in the

French side of this user’s guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Set Lock Code

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes

preset with a lock code of “0000”. You may change the code to any four-digit number you wish.

To change the lock code, follow the steps below.

Press the MENU button

I N I T I A L S E T U P

S E T L O C K C O D E

L O C K C O D E

F I N I S H

π†

To SET LOCK CODE

To operate (lock icon

√®

appears)

0 0 0 0

Press ZERO to access the lock code

The first digit will be highlighted

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

√®

π†

To select the number

To move to the next digit

Continue to follow these directions for all four numbers

π†

To FINISH

√®

To save settings and exit

(your lock code is now set)

Press the EXIT button when finished

When a viewer attempts to watch a blocked channel, this message appears:

THIS PROGRAMMING EXCEEDS

YOUR RATING LIMITS.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

NO. - - - -

The channel will remain blocked until the correct lock code is entered (see above for

information on setting your lock code).

Notes:

• After a power interruption you must reset the lock code.

• Write your lock code number down and keep it hidden from potential viewers.

• If you forget the lock code, a new code may be set using the steps listed above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Language

The language function is described on page 15 as the interactive plug-in menu. If you need to

choose the language again, follow the steps below.

I N I T I A L

S E T U P

Press the MENU button

P R E V I O U S

π†

To LANGUAGE

L A N G U A G E

E N G . F R A N . E S P.

C L O S E D C A P T I O N

F R O N T P A N E L L O C K

A U T O S H U T O F F

X D S I D

√®

To choose a language: ENG. (English), FRAN.

(French) or ESP. (Spanish)

O F F

O N

Press the EXIT button when finished

N E X T P A G E

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

Closed Caption

Many broadcasts now include an onscreen display of dialog called closed captions. Some

broadcasts may also include displays of additional information in text form. Your television can

access and display this information using the closed caption feature. To activate the closed

caption feature, follow the steps below.

Press the MENU button

π†

√®

π†

√®

To CLOSED CAPTION

To operate

To select CAPTION or TEXT

To select a caption (CC1 to CC4) or text

channel (T1 to T4)

I N I T I A L S E T U P

C L O S E D C A P T I O N

C A P T I O N

T E X T

C C 1

T 1

π†

√®

To accept that selection and move to FINISH

To save settings and exit

F I N I S H

S E L E C T

B Y

Press the EXIT button when finished

E X I T

O P E R A T E B Y

E X I T B Y

Notes:

• Closed caption subtitles are usually found on closed caption channel CC1. Some programs

may include additional text information which is usually found on text channel T1. The other

channels are available for future use.

• Closed captioning may not work correctly if the signal being received is weak or if you are

playing a video tape.

• Most broadcasts containing closed captioning will display a notice at the start of the program.

• To select the mode, press the C.^C. button. See page 42.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Front Panel Lock

This allows you to lock the keys on the front of the TV, so that a child may not accidentally

change your viewing preferences.

Press the MENU button

π†

√®

To FRONT PANEL LOCK

To turn ON or OFF

Press the EXIT button when finished

You can turn off this feature in the following ways:

• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your

remote control.

• Use the remote control.

• Press the M^ENUbutton on the front of the TV for more than 3 seconds. In this case, the OSD

for FRONT PANEL LOCK will appear.

Note:

• To turn ON/OFF the TV, press the power button on the front of the TV for more than 3

seconds. This feature will remain ON.

Auto Shut Off

This function automatically shuts off your TV when there is no signal from the channel the TV is

on.

Press the MENU button

π†

√®

To AUTO SHUT OFF

To turn ON or OFF

Press the EXIT button when finished

• If the channel that you have on does not receive a signal for more than one minute, the

blinking text “NOT RECEIVING A SIGNAL” appears on the screen, and starts the countdown.

If no signal is being received within 10 minutes, the TV shuts itself off.

XDS ID

XDS ID Display provides a channel’s call letters, the network’s name, and even a program

name. The XDS ID information is provided by the broadcaster.

Press the MENU button

π†

√®

To XDS ID

To turn ON or OFF

Press the EXIT button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Picture Settings

These settings allow you to change and adjust the way the picture appears on your television.

TINT

Tint allows you to adjust the levels of red and green in your TV picture.

COLOR

The color function lets you make all the colors in the TV picture appear either more vivid or

subtle.

PICTURE

Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker

or brighter picture overall.

BRIGHT

You can adjust the overall brightness of the TV picture with the Bright control.

DETAIL

The Detail feature adjusts the level of fine detail displayed in the picture.

Adjust the Picture Settings

Press the MENU button

P I C T U R E

A D J U S T

π†

To TINT, COLOR, PICTURE, BRIGHT or

DETAIL

P R E V I O U S

T I N T

S T A N D A R D

C O L O R

√ ®

π†

To enter

To adjust the setting

To move to the next setting

P I C T U R E

B R I G H T

D E T A I L

C O L O R T E M P E R A T U R E

N E X T P A G E

L O W

R E S E T B Y

S E L E C T

B Y

Press the EXIT button when finished

E X I T

O P E R A T E B Y

E X I T B Y

Note:

• If you press the 0 button, you can reset the setting to the factory default setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Color Temperature

You can decide how strong or dull the colors appear on the TV screen.

Press the MENU button

P I C T U R E

A D J U S T

P R E V I O U S

T I N T

π†

√®

To COLOR TEMPERATURE

To enter

S T A N D A R D

C O L O R

P I C T U R E

To set LOW or HIGH

B R I G H T

D E T A I L

Press the EXIT button when finished

C O L O R T E M P E R A T U R E

N E X T P A G E

L O W

R E S E T B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

Note: If you press the 0 button, you can reset the setting to the factory default setting.

Noise Muting

This feature inserts a blank blue screen over channels which are not broadcasting or are too

weak to be received clearly.

Press the MENU button

P I C T U R E

A D J U S T

P R E V I O U S

N O I S E M U T I N G

V S M

S T A N D A R D

π†

To NOISE MUTING

O N

√®

To turn noise muting ON or OFF

Press the EXIT button when finished

N E X T P A G E

R E S E T B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

Note:

• Noise muting will not work during auto tuner setup or when you operate channel summary.

(VSM) Velocity Scan Modulation

Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help

accentuate the differences in picture brightness to sharpen the edges of images.

Press the MENU button

P I C T U R E

A D J U S T

P R E V I O U S

N O I S E M U T I N G

V S M

S T A N D A R D

π†

√®

To VSM

O N

To enter

To turn VSM ON or OFF

N E X T P A G E

R E S E T B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

Note: If you press the 0 button, you can reset the

setting to the factory default setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with

the bass adjustment.

TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.

BALANCE – Adjust the level of sound between the TV’s left and right speakers with the

balance setting.

Adjust the Sound Settings

Press the MENU button

S O U N D

A D J U S T

π†

√ ®

π†

To BASS, TREBLE or BALANCE

To adjust the setting

P R E V I O U S

B A S S

T R E B L E

B A L A N C E

M T S

To move to the next setting

S T E R E O S A P M O N O

Press the EXIT button when finished

N E X T P A G E

R E S E T B Y

S E L E C T

B Y

E X I T

O P E R A T E B Y

E X I T B Y

Note:

• If you press the 0 button, you can reset the setting to the factory default setting.

MTS (Multi-Channel Television Sound)

MTS technology allows several audio signals to be broadcast at once, giving you a choice

in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP).

Press the MENU button

π†

To MTS

√®

Select the mode

(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP).

Press the EXIT button when finished

Notes:

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo

mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

Set Clock

The set clock function is described on page 16 as the interactive plug-in menu. You can choose

to set the clock automatically, or manually. If you need to set the clock again, follow the steps

below.

Press the MENU button

π†

To SET CLOCK

To operate

√®

When you set the clock automatically, choose AUTO by pressing the

√

arrows.

π†

√®

π†

√®

†

To TIME ZONE

C L O C K / T I M E R S

S E T C L O C K

To select your time zone

To D.S.T. (daylight savings time)

To turn D.S.T. ON or OFF

To FINISH

M O D E

A U T O

T I M E Z O N E

D . S . T .

P A C I F I C

O F F

F I N I S H

S E L E C T

B Y

√®

To save settings

E X I T

O P E R A T E B Y

E X I T B Y

Press the EXIT button when finished

When you set the clock manually, choose MANUAL by pressing the

√

arrows.

π†

√®

π†

√®

†

To move to the hour

To set the hour

C L O C K T I M E R S

S E T C L O C K

To move to minutes

To set the minutes

To START CLOCK

To operate

M O D E

M A N U A L

T I M E

– – : – – – –

√®

S T A R T C L O C K

B Y

S E L E C T

E X I T

E X I T B Y

O P E R A T E B Y

THANK YOU !!

Notes:

• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.

The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will

move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

On/Off Timer

The on/off timer lets you program your television to turn itself on or off. You can use it as an

alarm to wake up, to help you remember important programs, or as a decoy when you’re not

home.

Press the MENU button

C L O C K / T I M E R S

O N / O F F T I M E R

π†

√®

To ON/OFF TIMER

O N T I M E

7 : 0 0 P M

1 0 : 0 0 P M

0 2

O F F T I M E

C H A N N E L

O N V O L U M E

M O D E

To operate (begins with ON TIME)

C U R R E N T

E V E R Y D AY

N O

To set the hour (AM/PM) you want the TV to turn

O N / O F F T I M E R

F I N I S H

S E L E C T

B Y

†

√®

†

To move to minutes

To set the minutes

E X I T

E X I T B Y

O P E R A T E B Y

To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the

OFF TIME the same way as ON TIME

†

√®

†

To accept OFF TIME and move to CHANNEL

To select channel

To ON VOLUME

√®

†

To set the volume level

To move to MODE

√®

Choose ONCE or EVERYDAY

†

√®

†

To ON/OFF TIMER

Choose YES to accept the timer setting, choose NO if you don’t wish to accept

To FINISH

√®

To save settings

Press the EXIT button when finished

Notes:

• The on/off time cannot be set to locked or guarded channels.

• In order for the on/off timer to work, the clock must be set.

• After a power interruption, the timer settings must be reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Power

Turns the TV on or off.

Press the POWER button

Number Buttons - 10Key Pad

Use the number buttons on the remote control to move directly to a specific channel. For

example, to move to channel 7:

0 (Zero)

7 (Seven)

100+ Button

Use the 100+ button to directly access channels above channel 99. For example, to move to

channel 124, press 100+, 2 (Two), 4 (Four).

Channel +/–

Use these buttons to move up or down all the available channels your TV is able to recieve.

Volume +/–

Use these buttons to raise or lower the TV’s volume level.

Muting

The MUTING button instantly turns the volume down completely when you press it. Press

MUTING and the volume level will instantly go to zero. To restore the volume to its previous level,

press MUTING again.

The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate

the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

Exit

Use this button to enter or exit the TV’s onscreen menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Return +

The RETURN+ button has two functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the channels

using the CH+ and CH– buttons.

RETURN+ and hold for three seconds

RETURN CHANNEL

PROGRAMMED!

The channel currently active has been programmed as your return+ channel. Now scan through

the channels using the CHANNEL+/– buttons.

RETURN+

You will return to your programmed channel.

• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.

Input

Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or

V2-Component, or Video-3 for video devices like VCR’s, DVD players, or camcorders.

Press the INPUT button

By pressing the INPUT button, you can change the mode

VIDEO-1

VIDEO-2

V2-COMPONENT

VIDEO-3

Note:

• You can also access the input menu screen by using the MENU button on the front of the TV

instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST

screen. Choose the INPUT by pressing M^ENU

†

on the front panel and select TV or VIDEO

INPUT by using the C^HANNEL+/- buttons ( OPERATE

√

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Display

The display screen shows the current status of timers, inputs, and XDS ID.

Press the DISPLAY button

The screen to the right shows the following information:

07 KLVX PBS

JAZZ FESTIVAL

NOW

• The current channel or AV input (Channel 07)

• The current time (12:20 pm)

• Sleep timer status/minutes remaining (The Sleep Timer

is off)

• On/off timer status (Set to turn on everyday at 7:00 PM,

off at 10:00 PM)

12 : 20 PM

OFF

SLEEP TIMER

ON/OFF TIMER

ON TIME

EVERYDAY

7 : 00 PM

10 : 00 PM

OFF TIME

• Each Press of the DISPLAY button changes the display

mode

Display

Time

Channel

Off

Display - Full screen shown above

Time - Shows the current time only

Channel - Shows the current channel

Off - Turns display off

Notes:

• You may also turn off the display at any step by pressing MENU.

• If the clock, sleep timer or on/off timer are not set, the display screen will show:

“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals

of 15 minutes, for a total time of up to 180 minutes.

Press the SLEEP TIMER button

0 15 30 45 60 75 90 105 120 135 150 165 180

Sleep Timer Message

20 seconds before the automatic shutoff, this message will appear:

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

TO EXTEND

You then have 20 seconds to press the sleep timer button to delay the shut off for another

15 minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Sound

The SOUND button give you a choice of two sound effects.

A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more

effect.

BBE - BBE high definition audio adds natural, clear and extraordinary sound quality to any

program.

Press the SOUND button

S O U N D E F F E C T

π†

To select A.H.S. or BBE

To choose the setting

A . H . S .

B B E

M O V I E

O N

√®

S E L E C T

B Y

E X I T

E X I T B Y

O P E R A T E B Y

Press the EXIT when finished

Note: BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from

BBE Sound, Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from

BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.

C.C. (Closed Caption)

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

OFF

CAPTION

TEXT

• See page 32 when you set the caption/text mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Video Status

The VIDEO STATUS button gives you a choice of four TV picture display settings, including a

display of your own preferences.

STANDARD - Resets the picture display to the factory settings.

DYNAMIC - Heightens contrast.

THEATER - Gives a rich, film-like look to video when viewing in a dimly lit room.

GAME - Used for when you are playing video games connected to your TV.

Press the VIDEO STATUS button

By every press of the video status button, you change the mode.

STANDARD

DYNAMIC

THEATER

GAME

TheaterPro D6500K

The TheaterPro D6500K color temperature technology function makes sure that the video you

watch is set to the standard color temperature, so that what you see is as true to what the film

to video editors intended it to be.

Press the THEATER PRO button

Aspect

This adjusts the dimensions of the film or movie you are watching so that the image doesn’t

look stretched or squashed together.

Press the ASPECT button

ASPECT

16:9 4:3

Light

Your remote control includes illuminated buttons for key features like Channel +/– and

Volume +/–. Press the LIGHT button to turn the illumination on for 4 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

TV/CATV Slide Switch

Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to

operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.

Note:

• See page 18 for information on programming your remote for cable box operation.

VCR/DVD Slide Switch

You can control a VCR or DVD player with the buttons on the lower part of the remote control.

Move the slide switch to VCR or DVD to operate.

Notes:

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other

manufacturer’s brand VCR, please see the code chart and instructions on page 19.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufacturer’s brand DVD player, please see the code chart and instructions on page 20.

VCR Buttons

You can use this remote control to operate the basic functions of your VCR. These functions

include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and

power off.

Move the selector switch to VCR to operate.

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other

manufacturer’s brand VCR, please see the code chart and instructions on page 19.

DVD Buttons

You can also use this remote control to operate the basic functions of your DVD player. These

functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,

power on, and power off.

Move the selector switch to DVD to operate.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufacturer’s brand DVD player, please see the code chart and instructions on page 20.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

CHECK

PROBLEMS

There is no power

• See if the power cord became unplugged.

• Check for a blown fuse or circuit breaker or a power outage.

There is no picture

or sound

• The antenna could be disconnected.

• The input mode could be set improperly. See page 40.

• The tuner (Auto Tuner Setup) could be set improperly. See page 24.

• The TV station may be having difficulties. Check to see if other stations are working.

Remote control is not • Check to see that the batteries are still working and properly installed.

operating properly or • Make sure the remote has a clear sight path to the TV.

at all

• Check that the TV/CATV switch is in the proper position.

• You may be too far from the TV. You must be within 23 feet (7 meters).

You cannot select a

certain channel

• Make sure the channels have been programmed. See "Channel Summary", page 24.

• Check to see if the channel is locked. See "Channel Summary - Lock" page 25.

The power turns off

by itself

• Make sure the set did not become unplugged.

• Perhaps the On/Off Timer is set. See page 38.

• Check to see if the Sleep Timer was set. See page 41.

The clock is wrong

• The power was interrupted and the clock was not reset. See page 37.

• There is a problem with the TV. Unplug the set and call for service.

The On Timer is

blinking

The color quality

is poor

• Tint and Color may be improperly adjusted. See page 34.

• The Video Status mode may be turned to the wrong setting. See page 43.

There are lines

across the picture

• There could be interference from another electrical appliance, such as a computer,

another TV or VCR. Move any such appliances further away from the TV.

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

operating nearby. Move the antenna away from the appliance or change to a coaxial

cable connection which is less prone to interference.

The picture is spotted

There are double

pictures (ghosts)

• A building or passing airplane can reflect the original signal and produce a second,

slightly delayed one. Adjust your antenna position.

Picture is snowy

(image noise)

• Your antenna may be damaged, disconnected or turned. Check the antenna

connection. If the antenna is damaged, replace it.

Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 32.

Stereo or bilingual

programs can't be

heard

• Make sure the MTS settings are correct. See "MTS" on page 36.

There is no picture

being displayed for

INPUT-2

• Check your AV Cables to make sure they are connected tightly and properly.

• In case you are connecting using component cables to V2, make sure you select

"V2-COMPONENT" by pressing the INPUT button. See page 13 and 40.

• In case you are connecting using composite cables to V2, make sure you select

"VIDEO-2" by pressing the INPUT button. See page 13 and 40.

• The O^lmark will appear if you press the ASPECT button under this condition: While

noise muting is on over channels which are not broadcasting or are too weak to be

received.

O mark appears

Static electricity

• It is normal to feel static electricity if you brush or touch the screen.

You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless

crackling sounds the sound or picture become abnormal, this is fine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

For Canadian model televisions, see the separate sheet for Canadian

Warranty information.

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth

below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE

MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period

shown below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.)

Parts

Labor

1 YEAR

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE

DISTRICT OF COLUMBIA AND COMMONWEALTH OF PUERTO RICO.

WHAT WE WILL DO:

If this product is found to be defective within the warranty period, JVC will repair or

replace defective parts at no charge to the original owner. Such repair and replacement

services shall be rendered by JVC during regular business hours at JVC authorized

service centers. Parts used for replacement are warranted only for the remainder of this

Warranty Period. All products and parts thereof may be brought to a JVC authorized

service center on a carry-in basis. Televisions with a screen size of 25 inches and larger

may be covered on an in-home basis where such service is available.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

To determine if in-home service is available in your area, either contact the selling dealer

(retailer) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service

locations can also be obtained from our website http://www.jvcservice.com. In-home service, if

available, will require clear access to the Television by the service representatives. If in-home

service is not available, carry in service will be provided.

If service is not locally available, box the product carefully, preferably in its original

carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of

the problem to the nearest JVC Factory Service Center, the name and location which will

be given to you by the toll free number.

If you have any questions concerning your JVC Product, please contact our Customer

Relations Department.

WHAT IS NOT COVERED:

This limited warranty provided by JVC does not cover:

1) Products which have been subject to abuse, accident, alteration, modification,

tampering, negligence, misuse, faulty installation, lack of reasonable care, or if

repaired or serviced by anyone other than a service facility authorized by JVC to

render such service, or if affixed to any attachment not provided with the products,

or if the model or serial number has been altered, tampered with, defaced or

removed;

2) Initial installation, installation and removal from “built-in” entertainment centers and

other mounting systems;

3) Operational adjustments covered in the Owner’s Manual, normal maintenance, video

and audio head cleaning;

4) Damage that occurs in shipment, due to an act of God, and cosmetic damage;

5) Signal reception problems and failures due to line power surge;

6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90

days from the date of purchase;

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

7) Accessories;

8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of

purchase.)

There are no express warranties except as listed above.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY

OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY

HEREIN.

JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT,

INCONVENIENCE, OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR

CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS

OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY

BREACH OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING

THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE,

ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or

limitations on how long the warranty lasts, so these exclusions or limitations may not

apply to you. This warranty gives you specific legal rights and you may also have other

rights which vary state to state.

JVC COMPANY OF AMERICA

1700 Valley Road

DIVISION OF JVC AMERICAS CORP.

Wayne, New Jersey 07470

http://www.jvcservice.com

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY

DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY.

PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION

PACKAGED WITH EACH REFURBISHED PRODUCT.

For customer use:

Enter below the Model No. and Serial No. which is located either on the rear, bottom or

side of the cabinet.

Retain this information for future reference.

Model No.:

Serial No.:

Purchase Date:

Name Of Dealer:

Download from Www.Somanuals.com. All Manuals Search And Download.

Authorized Service Centers

QUALITY

SERVICE

HOW TO LOCATE YOUR JVC SERVICE CENTER

TOLL FREE: 1 (800) 537-5722

http://www.jvc.com

Dear Customer,

In order to receive the most satisfaction from your purchase, please read the

instruction booklet before operating the unit. In the event that repairs are necessary,

please call 1 (800) 537-5722 for your nearest authorized servicer or visit our website

at www.JVC.com

Remember to retain your Bill of Sale for Warranty Service.

Do not service the television yourself

Caution

To prevent electrical shock, do not open the cabinet. There are no user serviceable

parts inside. Please refer to qualified service personnel for repairs.

Accessories

To purchase accessories for your JVC product, please call toll free:

1 (800) 882-2345 or on the web at www.JVC.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

MODEL

AV-20FA44

Reception

Format

NTSC, BTSC System (Multi-Channel Sound)

VHF 2 to 13, UHF 14 to 69

Sub Mid, Mid, Super, Hyper and Ultra bands

(181 channel frequency synthesizer system)

Reception

Range

Power Source

AC 120V, 60Hz

85W

Power

Consumption

Screen Size

20 inch / 51 cm

measured diagonally

full square

Audio Output

Speakers

3W + 3W

2 1/2 x 5 inch / 6.5 x 13 cm oval x 2

75 ohms (VHF/UHF) (F-type connector)

Antenna

Terminal

External Input

Jacks

Video: 1 Vp-p, 75 ohms

Audio: 500mVrms (-4dBs) high impediance

S-Video Input

Jack

Y: 1Vp-p positive, 75 ohms (negative sync provided)

C: 0.286 Vp-p (burst signal), 75 ohms

Component

Input Jacks

Y: 1Vp-p positive, 75 ohms (negative sync provided)

PB/PR: 0.7 Vp-p, 75 ohms

FIX; 500 mVrms (-4dBs) Low impedance

(400 Hz when modulated 100%)

Audio Output

Jacks (FIX)

Headphone

Jack

Ø 3.5 mm x 1

Dimensions (In)

WxHxD (cm)

26 1/4 x 18 13/16 x 19 7/8

66.7 x 47.7 x 50.5

Weight (lbs / kg)

Accessories

55 / 25

Remote control unit x 1 / AA batteries x 2

Specifications subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

JVC CANADA, INC.

21 Finchdene Square

Scarborough, Ontario

Canada, M1X 1A7

Wayne, New Jersey, 07470

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Washer IWE 7125 User Manual
Insignia Portable DVD Player NS VDVD1 User Manual
Insignia Wireless Office Headset NS GPS31201 User Manual
Jenn Air Cooktop W10526003A User Manual
JVC Car Stereo System KD AR260 User Manual
JVC Stereo System CA MD9R User Manual
Kenwood Stereo Receiver VR 7070A User Manual
KitchenAid Coffeemaker XP224010 User Manual
KitchenAid Food Processor KFC3511 User Manual
Knoll Stereo Amplifier MX1255 User Manual