JVC CD Player KS FX385 User Manual

CASSETTE RECEIVER

KS-FX385

«∑¬‡§√Õß‡≈π‡∑ª

For installation and connections, refer to the separate manual.

°√≥“¥§¡Õ∑·¬°µ“ßÀ“° „π°“√µ¥µß·≈–°“√‡™Õ¡µÕ

INSTRUCTIONS

§”·π–π”

GET0226-001A

[U/UH]

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION OF THE BUTTONS

Control panel

Display window

;

a s

t y

(standby/on/attenuator) button

4/¢

(control panel release) button

buttons

2 S BASS (super bass) button

3 0 (eject) button

y CD-CH (CD changer) button

4 Display window

5 Cassette compartment

6 1/¡ PROG (program) button

7 SCM (sound control memory) button

8 FM AM button

9 +/– buttons

p SEL (select) button

Display window

u FM band indicators

FM1, FM2, FM3

i AM band indicator

o CD-CH (CD changer) indicator

; Sound mode indicators

BEAT, SOFT, POP

q Number buttons

w MO/RND (monaural/random) button

a Tuner reception indicators

MO (monaural), ST (stereo)

s RND (random) indicator

• Used only when connecting to a CD changer.

• Also functions as SSM buttons when pressed

together with DISP (display) button.

• RND (random) functions only when connecting

to a CD changer.

d S BASS (super bass) indicator

e DISP (display) button

f Main display

• Also functions as SSM buttons when pressed

together with MO/RND (monaural/random)

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

1 3

Turning on the power

3 Adjust the volume.

1 Turn on the power.

To increase the volume

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

To decrease the volume

2 Select the source.

Volume level appears.

4 Adjust the sound as you want.

(See pages 10 and 11.)

To drop the volume in a moment

To operate the tuner (FM or AM),

see pages 6 – 8.

To play a tape,

see page 9.

To operate the CD changer,

see pages 13 – 14.

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold

second.

for more than one

“SEE YOU” appears, then the unit turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the clock

4 Finish the setting.

1 Press and hold SEL (select) for more

than 2 seconds.

“CLOCK H” or “CLOCK M”

appears on the display.

To check the current clock time or change the

display mode

Press DISP (display) repeatedly.

Each time you press the button,

the display mode changes as

follows:

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

2 Adjust the hour.

• During tuner operation:

Frequency

Clock

• During tape operation:

Play mode (TAPE)

Clock

• During CD Changer operation:

3 Set the minute.

1 Select “CLOCK M” (minute).

2 Adjust the minute.

Elapsed playing time

Clock Disc number

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO OPERATIONS

To stop searching before a station is

received, press the same button you have

pressed for searching.

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching for a station manually:

Manual search

1 Select the band (FM1 – 3, AM).

Note:

When a cassette is in the cassette compartment, you

cannot select the tuner. Be sure to eject the cassette

from the cassette compartment to listen to the radio.

FM1

FM2

FM3

Searching for a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

FM1

FM2

FM3

2 Press and hold ¢

Selected band appears.

until “M” (manual) starts flashing on

the display.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Start searching for a station.

To search for stations of

higher frequencies

To search for stations of lower frequencies

When a station is received, searching stops.

Download from Www.Somanuals.com. All Manuals Search And Download.

Storing stations in memory

3 Tune in to a station you want while

“M” (manual) is still flashing.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

To tune in to stations of

higher frequencies

• Manual preset of both FM and AM stations

To tune in to stations of lower frequencies

• If you release your finger from the button,

the manual mode will automatically turns

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for

FM and 9 kHz intervals for AM) until you

release the button.

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

FM1

FM2

FM3

When an FM stereo broadcast is hard to

receive:

Press MO/RND (monaural/random),

while listening to an FM stereo

broadcast.

Each time you press the button, the

MO indicator lights up and goes off

alternately.

2 Press and hold both buttons for

more than 2 seconds.

MO (monaural) indicator

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

“SSM” appears, then disappears when

automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest

frequency).

To restore the stereo effect, press the same

button again.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes:

Manual preset

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 7 and 8.

FM1

FM2

FM3

1 Select the band (FM1 – 3, AM).

2 Tune in to a station (in this example,

of 92.5 MHz).

FM1

FM2

FM3

To tune in to stations of

higher frequencies

2 Select the number (1 – 6) for the

To tune in to stations of lower frequencies

preset station you want.

3 Press and hold the number button

(in this example, 1) for more than

2 seconds.

Preset number flashes for a while.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

TAPE OPERATIONS

To stop play and eject the cassette

Press 0.

Listening to a cassette

You can play back type I (normal) tapes.

1 Turn on the power.

Tape play stops, the cassette automatically

ejects from the cassette compartment. The

source changes to the previously selected one.

• You cannot change the source if the cassette is

still in the cassette compartment.

To change the source, you must eject the

cassette first.

• You can also eject the cassette by pressing 0

while the unit is turned off.

Note on One-Touch Operation:

When a cassette is already in the cassette

compartment, tape play starts automatically.

However, it is not recommended to leave the

cassette in the compartment when turning off the

power. It may damage the tape head and the

cassette.

To fast wind a tape

2 Insert a cassette into the cassette

compartment.

Press in ¡ or 1.

The tape will be wound in the direction of the

When one side of the tape

reaches its end during

play, the other side of the

tape automatically starts

playing. (Auto Reverse)

arrows (

3 Select the tape direction.

Tape direction

Press both buttons at the

same time.

Each time you press both

buttons, the tape direction

changes alternately—

forward (

reverse (

) and

To restart playback, lightly press the other

button which is not pressed in (1 or ¡).

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

Adjusting the sound

2 Adjust the level.

You can adjust the sound characteristics to your

preference.

To increase the level

1 Select the item you want to adjust.

Each time you press the

button, the adjustable

items change as follows:

To decrease the level

BAS

TRE

FAD

Ex.: When you select “TRE” (treble)

(bass)

(treble)

(fader)

3 Repeat steps 1 and 2 to adjust the

VOL

(volume)

BAL

(balance)

other items.

Indication

To do:

Adjust the bass.

Range

BAS

(Bass)

–6 (min.)

Turning on/off the super bass

function

+6 (max.)

TRE

Adjust the treble. –6 (min.)

The super bass function allows you to maintain

the richness and fullness of the bass sound

regardless of how low you set the volume.

(Treble)

+6 (max.)

FAD*¹

(Fader)

Adjust the front

and rear speaker

balance.

R6 (Rear only)

F6 (Front only)

Each time you press the

button, the function turns on

and off alternately.

BAL

Adjust the left

L6 (Left only)

(Balance) and right speaker

balance.

S BASS indicator

R6 (Right only)

VOL*²

Adjust the volume. 00 (min.)

(Volume)

50 (max.)

*¹If you are using a two-speaker system, set the fader

level to “00.”

*²Normally, the + and – buttons work as the volume

control buttons. So you do not have to select “VOL”

to adjust the volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting preset sound modes

1 Call up the sound mode you want to

adjust.

You can select a preset sound adjustment

suitable to the music genre.

• See on the left column for

details.

Select the sound mode you want.

Each time you press the button,

the sound mode changes as

follows:

2 To adjust the bass or treble level.

1 Select “BAS” (bass) or “TRE” (treble).

SCM OFF

BEAT

SOFT

POP

2 Adjust the level.

Ex.: When you select “BEAT”

Indication For: Preset values

BAS TRE S.BASS

SCM OFF (Flat sound) 00

OFF

BEAT

Rock or

disco music

SOFT

Quiet

background

music

–3

OFF

To turn on or off the super bass function.

• See page 10 for details.

POP

Light music

Notes:

3 Repeat step 2 to adjust the other

• You can adjust each sound mode to your preference,

and store it in memory.

items.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

below.

• To adjust the bass and treble reinforcement levels or

to turn on/off the super bass function, see page 10.

4 Press and hold SCM until the sound

mode you have selected in step 1

flashes on the display.

Your adjustment made for

the selected sound mode is

stored in memory.

Storing your own sound

adjustments

5 Repeat the same procedure to store

other sound modes.

You can adjust the sound modes (BEAT, SOFT,

POP) to your preference and store your own

adjustments in memory.

To reset to the factory settings, repeat the

same procedure and reassign the preset values

listed in the table on the left column.

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

Download from Www.Somanuals.com. All Manuals Search And Download.

DETACHING THE C0NTROL PANEL

You can detach the control panel when leaving

the car.

Attaching the control panel

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

1 Insert the left side of the control

panel into the groove on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the right side of the control

panel to fix it to the panel holder.

2 Lift and pull the control panel out of

the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

Download from Www.Somanuals.com. All Manuals Search And Download.

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X

series with your unit (except for JVC MP3-

compatible CD changer).

If you have another CD changer, consult your

JVC car audio dealer for connections.

• For example, if your CD changer is one of the

KD-MK series, you need a cord (KS-U15K) for

connecting it to this unit.

Playing CDs

Select the CD changer (CD-CH).

Playback starts from the first track of

the first disc.

All tracks of all discs are played

back.

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

Disc number

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “NO CD” will appears on the display.

If this happens, remove the magazine and

set the discs correctly.

• If no magazine is loaded in the CD changer,

“NO MAG” appears on the display. If this

happens, insert the magazine in the CD

changer.

Track number

Note on One-Touch Operation:

When you press CD-CH, the power automatically

turns on. You do not have to press

on the power.

to turn

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

Download from Www.Somanuals.com. All Manuals Search And Download.

To fast-forward or reverse the track

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the CD

changer is playing).

Press and hold ¢

playing a CD, to fast-forward

the track.

, while

Press and hold

4, while playing a CD, to

reverse the track.

To go to the next or previous tracks

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Press ¢

briefly, while

playing a CD, to go ahead to

the beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next track is located and

played back.

Disc number

Press

4 briefly, while playing a CD, to go

Track number

back to the beginning of the current track.

Each time you press the button consecutively,

the beginning of the previous tracks is located

and played back.

Ex.: When disc number 3 is selected

Selecting CD playback modes

To play back tracks at random

(Random Play)

Each time you press the button,

CD random play mode changes

as follows:

RND1

RND2

Canceled

RND

Indicator

Mode

RND1

Plays at random

Lights

All tracks of the current

disc, then the tracks of

the next disc, and so on.

RND2

Flashes

All tracks of all discs

inserted in the

magazine.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the Adjust it to the optimum level.

minimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work at

all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

While holding SEL, press

for more than 2

seconds to reset the unit. (Your

preset adjustments will also be

erased.) (See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Signals are too weak.

Store stations manually.

• Static noise while listening

to the radio.

The antenna is not connected

firmly.

Connect the antenna firmly.

• A cassette tape cannot be

inserted.

You have tried to insert a

cassette in the wrong way.

Insert the cassette with the

exposed tape facing right.

• Cassette tapes become

hot.

This is not a malfunction.

• Tape sound is at very low

level and sound quality is

degraded.

The tape head is dirty.

Clean it with a head cleaning

tape.

• “NO CD” appears on the

display.

No disc is in the magazine.

Insert discs into the magazine.

Insert discs correctly.

Discs are inserted upside

down.

Discs are unplayable.

Insert playable discs.

Insert the magazine.

• “NO MAG” appears on the

display.

No magazine is loaded in the

CD changer.

• “RESET 8” appears on the

display.

This unit is not connected to

the CD changer correctly.

Connect this unit and the CD

changer correctly, then press

the reset button of the CD

changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the

CD changer.

• The CD changer does not

work at all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

While holding SEL, press

for more than 2

seconds to reset the unit. (Your

preset adjustments will also be

erased.) (See page 2.)

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

This unit requires very little attention, but you will

be able to extend the life of the unit if you follow

the instructions below.

To keep the tape clean

To clean the head

• Always store the cassettes in their storage

cases after use.

• Do not store cassettes in the following places:

– Subject to direct sunlight

– With high humidity

– At extremely hot temperatures

• Clean the heads after every 10 hours of use

using a wet-type head cleaning tape (available

at an audio store).

When the head becomes dirty, you may realize

the following symptoms:

– Sound quality is reduced.

– Sound level decreases.

– Sound drops out.

CAUTION:

• Do not play the cassettes with peeling labels;

otherwise, they can damage the unit.

• Tighten tapes to remove slack since loose tape

may become entangled with the mechanism.

• Do not leave a cassette in the cassette

compartment after use, as the tape may become

slack.

• Do not play dirty or dusty tapes.

• Do not touch the highly-polished head with any

metallic or magnetic tools.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

CASSETTE DECK SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Wow & Flutter: 0.15% (WRMS)

Fast-Wind Time: 190 sec. (C-60)

Frequency Response: 50 Hz to 14 000 Hz

(Normal tape)

Front:

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

Signal-to-Noise Ratio: 52 dB

Stereo Separation: 40 dB

to 20 000 Hz at no more than

0.8% total harmonic distortion.

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Rear:

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

2.0 V/20 kΩ load (250 nWb/m)

188 mm × 58 mm × 11 mm

Mass (approx.):

TUNER SECTION

1.3 kg (excluding accessories)

Frequency Range:

FM:

AM:

87.5 MHz to 108.0 MHz

531 kHz to 1 602 kHz

[FM Tuner]

Usable Sensitivity:

11.3 dBf (1.0 µV/75 Ω)

Design and specifications are subject to change

without notice.

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 2.0 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Download from Www.Somanuals.com. All Manuals Search And Download.

EN, TH

0604DTSMDTJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

KS-FX385/KS-F185

Installation/Connection Manual

°“√µ¥µß/§¡Õ°“√µ¥µß

GET0225-004A

[U/UH]

0604DTSMDTJEIN

EN, TH

ENGLISH

‰∑¬™¥ª√–°Õ∫π‰¥√∫°“√ÕÕ°·∫∫¡“‡æÕ„™ß“π°∫√–∫∫

This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your

vehicle does not have this system, a voltage inverter is required, which can be purchased at

JVC car audio dealers.

™¥ª√–°Õ∫π‰¥√∫°“√ÕÕ°·∫∫¡“‡æÕ„™ß“π°∫√–∫∫ °√–· ‰øø“ “¬¥π¢«≈∫°√–· µ√ß ¹²‚«≈∑

À“°√∂¬πµ¢Õß§≥‰¡‰¥„™√–∫∫π µÕß„™‡§√Õß·ª≈ß°√–· ‰ø™«¬ ´ß “¡“√∂À“´Õ‰¥®“°√“π¢“¬‡§√Õß‡ ¬ß√∂¬πµ JVC

Parts list for installation and connection

The following parts are provided for this unit.

After checking them, please set them correctly.

√“¬°“√ «πª√–°Õ∫ ”À√∫µ¥µß·≈–‡™Õ¡µÕ°π

«πª√–°Õ∫µÕ‰ªπ„À¡“°∫™¥ª√–°Õ∫π À≈ß®“°µ√«® Õ∫·≈« ª√∫µß‡§√Õß„À∂°µÕß

A / B

Hard case/Control panel

Sleeve

Trim plate

≈ß∫√√®/Àπ“ª¥

ª≈Õ°À¡

·ºπ‚≈À–¢Õ∫·µß

Power cord

Washer (ø5)

Lock nut (M5)

“¬‡§‡∫≈°”≈ß

ª√–‡°π«ß·À«π (ø5)

πÕµ≈Õ§ (M5)

Mounting bolt (M5 x 20 mm)

Rubber cushion

Handles

≈°µ¥ (M5 x 20 ¡≈≈‡¡µ√)

¬“ß°π°√–·∑°

§π∫ß§∫

°“√µ¥µß (°“√ª√–°Õ∫·ºßÀπ“ª∑¡‡¢“)

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require

information regarding installation kits, consult your JVC car audio dealer or a company supplying

kits.

¿“æµ«Õ¬“ßµÕ‰ªπ· ¥ß∂ß°“√µ¥µß·∫∫∑«‰ª À“°§≥¡ª≠À“À√ÕµÕß°“√¢Õ¡≈‡°¬«°∫™¥µ¥µß °√≥“ª√°…“°

∫º¢“¬‡§√Õß‡ ¬ß√∂¬πµ ^JVC¢Õß∑“πÀ√Õ∫√…

• ™¥ª√–°Õ∫ ∂“§≥‰¡·π„®«“µ¥µß™¥ª√–°Õ∫π∂°µÕßÀ√Õ‰¡ „ÀÀ“™“ßº‡™¬«™“≠‡ªπºµ¥µß

• If you are not sure how to install this unit correctly, have it installed by a qualified technician.

Do the required electrical connections.

µÕ “¬‰øµ“¡∑°”Àπ¥‰«∑ßÀ¡¥

184 mm

53 mm

⁄

When you stand the unit, be

careful not to damage the fuse

on the rear.

^*¹‡¡Õ§≥µß™¥ª√–°Õ∫¢π √–«

Bend the appropriate tabs to hold

the sleeve firmly in place.

ßÕ¬“∑”„Àø« ∫√‡«≥ «π∑“¬‡ ¬À“¬

ßÕ·ºπ‡æÕ¬¥ª≈Õ°„ÀµÕ°π‡¢“∑

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal1-2_KS-FX385[U_UH]f.p65

5/6/04, 9:49 AM

Removing the unit

Before removing the unit, release the rear section.

°“√∂Õ¥™¥ª√–°Õ∫

°Õπ®–∂Õ¥™¥ª√–°Õ∫ „Àª≈¥Àπ“µ¥ «π∑“¬°Õπ

Insert the two handles, then pull them as illustrated so that

the unit can be removed.

„ §π∫ß§∫ 2 Õπ≈ß„π√Õß ”À√∫„™æπ≈«¥ ¥ß¿“æ ®“°ππ „À‡≈Õπ™¥ª√–°Õ∫ÕÕ°

„π¢≥–∑§Õ¬ Ê ¥ß§π∫ß§∫∑ß Õß ÕπÕÕ°®“°°π

When using the optional stay / ‡¡Õ„™µ«¬¥·∫∫‡≈Õ°‰¥

(“¡“√∂‡≈Õ°‡ª¥§“ß‰«‰¥)

When installing the unit without using the sleeve / ‡¡Õµ¥µß™¥ª√–°Õ∫‚¥¬‰¡„™ª≈Õ°À¡

In a Toyota for example, first remove the car radio and install the unit in its place.

µ«Õ¬“ß‡™π „π√∂¬πµ‚µ‚¬µ“ „À∂Õ¥«∑¬µ¥√∂¬πµÕÕ°°Õπ·≈–µ¥µß™¥ª√–°Õ∫π‡¢“‰ª·∑π

Stay (option)

µ«¬¥ (‡≈Õ°‰¥)

Flat type screws (M5 x 8 mm)*

°√À«‡√¬∫ (M5 x 8 ¡≈≈‡¡µ√)*

Fire wall

ºπß°π‰ø

* Not included with this unit.

* ‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π

Dashboard

·ºßÀπ“ª∑¡

Bracket*

·∑π√Õß√∫*

Flat type screws (M5 x 8 mm)*

°√À«‡√¬∫ (M5 x 8 ¡≈≈‡¡µ√)*

Screw (option)

°√ (‡≈Õ°‰¥)

Pocket

°–‡ª“–

Bracket*

·∑π√Õß√∫*

Note

: When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If

longer screws are used, they could damage the unit.

À¡“¬‡Àµ

: ‡¡Õµ¥µß™¥ª√–°Õ∫≈ß„π·∑π√Õß√∫‰« „À„™ °√¬“«¢π“¥ 8 ¡≈≈‡¡µ√ ∂“„™ °√¬“«°«“πÕ“®∑”„À™¥ª√–°Õ∫‡ ¬À“¬‰¥

Install the unit at an angle of less than 30°.

µ¥µß™¥ª√–°Õ∫∑¡¡µ”°«“ 30 Õß»“

°“√µ√«® Õ∫ª≠À“¢¥¢Õß

TROUBLESHOOTING

• The fuse blows.

• ø« ¢“¥

* Are the red and black leads connected correctly?

* ¡°“√‡™Õ¡ “¬µ–°« ¥”·≈– ·¥ßÕ¬“ß∂°µÕßÀ√Õ‰¡

• Power cannot be turned on.

* Is the yellow lead connected?

• ‰¡ “¡“√∂‡ª¥‡§√Õß‰¥

* ¡°“√‡™Õ¡ “¬µ–°« ‡À≈ÕßÀ√Õ‰¡

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• ‰¡¡‡ ¬ßÕÕ°®“°≈”‚æß

* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æß‡°¥‰øø“≈¥«ß®√À√Õ‰¡

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

• ‡ ¬ß‡æ¬π

* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æßµÕ≈ß¥πÀ√Õ‰¡

* “¬¢«≈∫ ¢Õß≈”‚æß¥“π´“¬·≈–¢«“µÕ≈ß¥πµ“¡ª°µÀ√Õ‰¡

• Noise interfere with sounds.

* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

• ‡ ¬ß√∫°«π

* ¡°“√„™ “¬ πÊ À√ÕÀπ“Ê µÕ®“°‡§√Õß «π∑µ¥µß ‰«∫πæπ¥“πÀ≈ß°∫µ«∂ß√∂¬πµÀ√Õ‰¡

• ™¥ª√–°Õ∫√Õπ¢π

• Unit becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æßµÕ≈ß¥πÀ√Õ‰¡

* “¬¢«≈∫ ¢Õß≈”‚æß¥“π´“¬·≈–¢«“µÕ≈ß¥πµ“¡ª°µÀ√Õ‰¡

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal1-2_KS-FX385[U_UH]f.p65

5/19/04, 8:45 AM

ENGLISH

‰∑¬

°“√‡™Õ¡‚¥¬„™‰øø“

ELECTRICAL CONNECTIONS

To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and

make all electrical connections before installing the unit.

‡æÕªÕß°π°“√‡°¥‰øø“≈¥«ß®√¢Õ·π–π”„Àª≈¥¢«·∫µ‡µÕ√≈∫ÕÕ° ·≈«®ßµÕ “¬‰ø°Õπµ¥µß‡§√Õß

• µ√«® Õ∫„À·π„®«“‰¥‡¥π “¬¥πµÕ√–À«“ß‡§√Õß°∫µ«∂ß √∂¬πµ„À¡·≈«À≈ß®“°µ¥µß

• Be sure to ground this unit to the car’s chassis again after installation.

À¡“¬‡Àµ:

Notes:

• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your

• „™æ°¥®”‡æ“–·∑πø« À“°ø« ¢“¥∫Õ¬ „Àª√°…“√“ π¢“¬‡§√Õß‡ ¬ß√∂¬πµ JVC

^•·√ß¢∫ ß ¥‡¢“≈”‚æß‰¡§«√‡°π°«“ 45 W ∑≈”‚æßÀ≈ß ·≈– 45 W ∑≈”‚æßÀπ“ ‚¥¬¡§«“¡µ“π∑“π 4 Ω ∂ß 8 Ω

• °“√ªÕß°π°“√≈¥«ß®√ ®–µÕßæπ¢« “¬µ–°« ∑‰¡„™·≈«¥«¬‡∑ ªæπ “¬‰ø

• ·ºπ√–∫“¬§«“¡√Õπ®–√Õπ¡“°À≈ß®“°„™ √–¡¥√–«ßÕ¬“‰ª ¡º ‡¡Õ∂Õ¥™¥ª√–°Õ∫π

JVC car audio dealer.

• Maximum input of the speakers should be more than 45 W at the rear and 45 W at the front, with

an impedance of 4 Ω to 8 Ω.

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.

Heat sink

·ºπ√–∫“¬§«“¡√Õπ

A Typical Connections / °“√‡™Õ¡µÕ·∫∫ª°µ

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause

serious damage to this unit.

The leads of the power cord and those of the connector from the car body may be different in

color.

°Õ•∑”°“•‡™•Õ¡µÕ: µ•«®†Õ•°“•‡¥•†“¬‰ø„•••¬•µÕ¬“ß•–¡¥•–«Õ¬“„Àº¥æ•“¥„•°“•‡™•Õ¡µÕ™¥ª•–°Õ•™¥•

°“•‡™•Õ¡µÕº¥æ•“¥Õ“®∑”„À‡°¥§«“¡‡†¬À“¬•“¬·•ß°•™¥ª•–

°Õ••‰¥“•µ–°«¢Õß†“¬‰ø ·•–¢ÕßÕª°••µÕ‡™•Õ¡®“°µ«• ß••Õ“®¡†∑‰¡‡À¡•Õ•°•

1 µÕ “¬‰ø µ“¡≈”¥∫∑√–∫„π√ª¥“π≈“ß

2 ‡™Õ¡µÕ°∫ “¬Õ“°“»

1 Connect the colored leads of the power cord in the order specified in the illustration below.

2 Connect the antenna cord.

3 Finally connect the wiring harness to the unit.

3 ¥∑“¬ µÕ «π§«∫§¡°“√‡¥π “¬‰ø‡¢“°∫™¥ª√–°Õ∫™¥π

To CD Changer—only for KS-FX385 (see diagram

)

‡¢“‡§√Õß‡≈π´¥—KS-FX385 ‡∑“ππ (¥·ºπ¿¡

)

Rear ground terminal

®¥‡™Õ¡µÕ “¬¥π¥“πÀ≈ß

15 A fuse

ø« ¢π“¥ 15 A

Not included with this unit

^*¹‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π

Ignition switch

«∑™®¥√–‡∫¥

Antenna terminal

¢« “¬Õ“°“»

Black

¥”

To metallic body or chassis of the car

µÕ°∫‚§√ß‚≈À–À√Õ‡™ ´ ¢Õß√∂¬πµ

Yellow*²

‡À≈Õß*²

Line out (see diagram

)

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch) (constant 12 V)

“¬ÕÕ° (Line out) (¥·ºπ¿¡

)

µÕ°∫¢«∑¡°√–· ‰øø“„π·ºßø« ´ßµÕ°∫·∫µ‡µÕ√√∂¬πµ

(‚¥¬‰¡µÕß„™ «∑™®¥√–‡∫¥) (12 ‚«≈∑§ß∑)

Fuse block

·ºßø«

Red

Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

·¥ß

To an accessory terminal in the fuse block

µÕ°∫¢« «πª√–°Õ∫„π·ºßø«

^*²°Õπ°“√µ√«® Õ∫°“√∑”ß“π¢Õß™¥ª√–°Õ∫π°Õπ∑®–µ¥µß

µÕßµÕ “¬µ–°«π°Õπ ¡©–ππ®–‰¡ “¡“√∂‡ª¥‡§√Õß‰¥

Blue with white stripe

π”‡ßπ≈“¬¢“«

To the remote lead of other equipment or automatic antenna if any (200 mA max.)

µÕ “¬°∫Õª°√≥ÕπÀ√Õ‡ “Õ“°“»Õµ‚π¡µ∂“¡ (¢π“¥ ß ¥ 200 mA)

White with black stripe

White

Gray with black stripe

Gray

Green with black stripe

Green

Purple with black stripe

Purple

¢“«·∂∫¥”

¢“«

‡∑“·∂∫¥”

‡∑“

‡¢¬«·∂∫¥”

‡¢¬«

¡«ß·∂∫¥”

¡«ß

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

≈”‚æß´“¬ (Àπ“)

≈”‚æß¢«“ (Àπ“)

≈”‚æß´“¬ (À≈ß)

≈”‚æß¢«“ (À≈ß)

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal3-4_KS-FX385[U_UH]f.p65

5/19/04, 8:44 AM

Connections Adding Other Equipment / °“√µÕ‡æ¡‡µ¡‡¢“°∫Õª°√≥Õπ Ê

Amplifier / ‡§√Õß¢¬“¬

You can connect an amplifier to upgrade your car stereo system.

• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so

that it can be controlled through this unit.

• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker

leads of this unit unused.

§≥ “¡“√∂µÕ·Õ¡æ≈ø“¬‡ÕÕ√ ‡æÕ‡æ¡ ¡√√∂π–„À√–∫∫ ‡µÕ√‚Õ‰¥

• µÕ “¬µ–°«√–¬–‰°≈ ( π”‡ßπ≈“¬¢“«) ‡¢“°∫ “¬µ–°«√–¬–‰°≈¢ÕßÕª°√≥Õπ Ê ‡æÕ®– “¡“√∂§«∫§¡‚¥¬™¥ª√–°Õ∫π‰¥

• ∂Õ¥≈”‚æßÕÕ°®“°™¥ª√–°Õ∫π ·≈«µÕ‡¢“°∫‡§√Õß¢¬“¬ ∑ß “¬µ–°«≈”‚æß¢Õß™¥ª√–°Õ∫π‰«

Rear speakers

Remote lead

Y-connector (not supplied for this unit)

≈”‚æßÀ≈ß

“¬µ–°«•–¬–‰°•

¢ÕµÕ√ªµ« Y (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)

INPUT

‡§√^JÕ^Vß¢^C¬^A“¬^m‡^p¬^liß^fieJ^rVC

Remote lead (Blue with white stripe)

“¬µ–°«•–¬–‰°• ( π”‡ßπ≈“¬¢“«)

Signal cord (not supplied for this unit)

“¬‡§‡∫≈ ≠≠“≥ (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)

To the remote lead of other equipment or automatic antenna if any

µÕ “¬°∫Õª°√≥ÕπÀ√Õ‡ “Õ“°“»Õµ‚π¡µ∂“¡

LINE OUT

KS-FX385

KS-F185

FRONT

REAR

Front speakers

≈”‚æßÀπ“

*³Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not

coated with paint (if coated with paint, remove the paint before attaching the wire). Failure to

do so may cause damage to the unit.

*³µÕ≈«¥ “¬¥π„À·ππ‡¢“°∫µ«∂ß‡À≈° À√Õµ«∂ß√∂ ˙ µ√ß «π ∑‰¡¡ ‡§≈Õ∫ (À“°¡ ‡§≈Õ∫Õ¬ „À¢¥ ÕÕ°°Õπ

°ÕπµÕ≈«¥ “¬¥π) À“°‰¡ªØ∫µµ“¡§”·π–π”π ‡§√ÕßÕ“®™”√¥À√Õ‡ ¬À“¬‰¥

CD Changer / ‡§√Õß‡≈π´¥ CD

Only for KS-FX385 / KS-FX385 ‡∑“ππ

Refer also to page 13 of the INSTRUCTIONS. / ¥¢Õ·π–π”„πÀπ“ 13

Connecting cord supplied for your CD changer

“¬µÕ„À¡“æ√Õ¡‡§√Õß‡≈π´¥

JVC CD changer

CAUTION / ¢Õ§«√√–«ß

• Before connecting the CD changer, make sure that the unit

‡§√Õß‡≈π´¥ JVC

is turned off.

KS-FX385

^•°Õπ®–‡™Õ¡µÕ‡§√Õß‡≈π´¥ °√≥“µ√«® Õ∫„À·π„®«“‡§√Õß‡≈π´¥ππª¥Õ¬

¢Õ§«√√–«ß ”À√∫°“√µÕ·À≈ß®“¬°”≈ß·≈–≈”‚æß:

PRECAUTIONS on power supply and speaker connections:

• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the

unit will be seriously damaged.

• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker

wiring in your car.

• Õ¬“µÕ “¬µ–°«‡§‡∫≈°”≈ß¢Õß≈”‚æß‡¢“°∫·∫µ‡µÕ√√∂¬πµ ¡©–ππ ™¥ª√–°Õ∫®–‰¥√∫§«“¡‡ ¬À“¬¡“°

• °Õπ∑®–µÕ “¬µ–°«‡§‡∫≈°”≈ß¢Õß≈”‚æß‡¢“°∫≈”‚æß „Àµ√«® Õ∫°“√‡¥π “¬‰ø≈”‚æß„π√∂¢Õß§≥„À‡√¬∫√Õ¬‡ ¬°Õπ

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal3-4_KS-FX385[U_UH]f.p65

5/6/04, 11:39 AM

CASSETTE RECEIVER KS-FX385/KS-FX385S/KS-FX385G

RADIO KASET

KS-FX385/KS-FX385S/KS-FX385G

For installation and connections, refer to the separate manual.

Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.

INSTRUCTIONS

BUKU PETUNJUK

GET0226-003A

[UN]

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

SOUND ADJUSTMENTS ................... 10

Adjusting the sound .................................. 10

Turning on/off the super bass function ...... 10

Selecting preset sound modes.................. 11

Storing your own sound adjustments ........ 11

LOCATION OF THE BUTTONS ............

Control panel.............................................

BASIC OPERATIONS .......................

Turning on the power ................................

Setting the clock........................................

DETACHING THE C0NTROL PANEL ...... 12

CD CHANGER OPERATIONS .............. 13

Playing CDs .............................................. 13

Selecting CD playback modes .................. 14

RADIO OPERATIONS ......................

Listening to the radio.................................

Storing stations in memory .......................

Tuning in to a preset station ......................

TROUBLESHOOTING ...................... 15

MAINTENANCE ............................. 16

SPECIFICATIONS ........................... 17

TAPE OPERATIONS ........................

Listening to a cassette ..............................

How to reset your unit

While holding SEL (select), press

(standby/on/attenuator) button for more than 2 seconds.

This will reset the built-in microcomputer.

(standby/on/attenuator)

SEL (select)

Note:

Your preset adjustments—such as preset channels or sound adjustments—will also be erased.

BEFORE USE

*For safety....

*Temperature inside the car....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION OF THE BUTTONS

Control panel

Display window

;

a s

t y

(standby/on/attenuator) button

4/¢

(control panel release) button

buttons

2 S BASS (super bass) button

3 0 (eject) button

y CD-CH (CD changer) button

4 Display window

5 Cassette compartment

6 1/¡ PROG (program) button

7 SCM (sound control memory) button

8 FM AM button

9 +/– buttons

p SEL (select) button

Display window

u FM band indicators

FM1, FM2, FM3

i AM band indicator

o CD-CH (CD changer) indicator

; Sound mode indicators

BEAT, SOFT, POP

q Number buttons

w MO/RND (monaural/random) button

a Tuner reception indicators

MO (monaural), ST (stereo)

s RND (random) indicator

• Used only when connecting to a CD changer.

• Also functions as SSM buttons when pressed

together with DISP (display) button.

• RND (random) functions only when connecting

to a CD changer.

d S BASS (super bass) indicator

e DISP (display) button

f Main display

• Also functions as SSM buttons when pressed

together with MO/RND (monaural/random)

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

1 3

Turning on the power

3 Adjust the volume.

1 Turn on the power.

To increase the volume

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

To decrease the volume

2 Select the source.

Volume level appears.

4 Adjust the sound as you want.

(See pages 10 and 11.)

To drop the volume in a moment

To operate the tuner (FM or AM),

see pages 6 – 8.

To play a tape,

see page 9.

To operate the CD changer,

see pages 13 – 14.

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold

second.

for more than one

“SEE YOU” appears, then the unit turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the clock

4 Finish the setting.

1 Press and hold SEL (select) for more

than 2 seconds.

“CLOCK H” or “CLOCK M”

appears on the display.

To check the current clock time or change the

display mode

Press DISP (display) repeatedly.

Each time you press the button,

the display mode changes as

follows:

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

2 Adjust the hour.

• During tuner operation:

Frequency

Clock

• During tape operation:

Play mode (TAPE)

Clock

• During CD Changer operation:

3 Set the minute.

1 Select “CLOCK M” (minute).

2 Adjust the minute.

Elapsed playing time

Clock Disc number

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO OPERATIONS

To stop searching before a station is

received, press the same button you have

pressed for searching.

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching for a station manually:

Manual search

1 Select the band (FM1 – 3, AM).

Note:

When a cassette is in the cassette compartment, you

cannot select the tuner. Be sure to eject the cassette

from the cassette compartment to listen to the radio.

FM1

FM2

FM3

Searching for a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

FM1

FM2

FM3

2 Press and hold ¢

Selected band appears.

until “M” (manual) starts flashing on

the display.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Start searching for a station.

To search for stations of

higher frequencies

To search for stations of lower frequencies

When a station is received, searching stops.

Download from Www.Somanuals.com. All Manuals Search And Download.

Storing stations in memory

3 Tune in to a station you want while

“M” (manual) is still flashing.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

To tune in to stations of

higher frequencies

• Manual preset of both FM and AM stations

To tune in to stations of lower frequencies

• If you release your finger from the button,

the manual mode will automatically turns

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for

FM and 9 kHz intervals for AM) until you

release the button.

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

FM1

FM2

FM3

When an FM stereo broadcast is hard to

receive:

Press MO/RND (monaural/random),

while listening to an FM stereo

broadcast.

Each time you press the button, the

MO indicator lights up and goes off

alternately.

2 Press and hold both buttons for

more than 2 seconds.

MO (monaural) indicator

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

“SSM” appears, then disappears when

automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest

frequency).

To restore the stereo effect, press the same

button again.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes:

Manual preset

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 7 and 8.

FM1

FM2

FM3

1 Select the band (FM1 – 3, AM).

2 Tune in to a station (in this example,

of 92.5 MHz).

FM1

FM2

FM3

To tune in to stations of

higher frequencies

2 Select the number (1 – 6) for the

To tune in to stations of lower frequencies

preset station you want.

3 Press and hold the number button

(in this example, 1) for more than

2 seconds.

Preset number flashes for a while.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

TAPE OPERATIONS

To stop play and eject the cassette

Press 0.

Listening to a cassette

You can play back type I (normal) tapes.

1 Turn on the power.

Tape play stops, the cassette automatically

ejects from the cassette compartment. The

source changes to the previously selected one.

• You cannot change the source if the cassette is

still in the cassette compartment.

To change the source, you must eject the

cassette first.

• You can also eject the cassette by pressing 0

while the unit is turned off.

Note on One-Touch Operation:

When a cassette is already in the cassette

compartment, tape play starts automatically.

However, it is not recommended to leave the

cassette in the compartment when turning off the

power. It may damage the tape head and the

cassette.

To fast wind a tape

2 Insert a cassette into the cassette

compartment.

Press in ¡ or 1.

The tape will be wound in the direction of the

When one side of the tape

reaches its end during

play, the other side of the

tape automatically starts

playing. (Auto Reverse)

arrows (

3 Select the tape direction.

Tape direction

Press both buttons at the

same time.

Each time you press both

buttons, the tape direction

changes alternately—

forward (

reverse (

) and

To restart playback, lightly press the other

button which is not pressed in (1 or ¡).

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

Adjusting the sound

2 Adjust the level.

You can adjust the sound characteristics to your

preference.

To increase the level

1 Select the item you want to adjust.

Each time you press the

button, the adjustable

items change as follows:

To decrease the level

BAS

TRE

FAD

Ex.: When you select “TRE” (treble)

(bass)

(treble)

(fader)

3 Repeat steps 1 and 2 to adjust the

VOL

(volume)

BAL

(balance)

other items.

Indication

To do:

Adjust the bass.

Range

BAS

(Bass)

–6 (min.)

Turning on/off the super bass

function

+6 (max.)

TRE

Adjust the treble. –6 (min.)

The super bass function allows you to maintain

the richness and fullness of the bass sound

regardless of how low you set the volume.

(Treble)

+6 (max.)

FAD*¹

(Fader)

Adjust the front

and rear speaker

balance.

R6 (Rear only)

F6 (Front only)

Each time you press the

button, the function turns on

and off alternately.

BAL

Adjust the left

L6 (Left only)

(Balance) and right speaker

balance.

S BASS indicator

R6 (Right only)

VOL*²

Adjust the volume. 00 (min.)

(Volume)

50 (max.)

*¹If you are using a two-speaker system, set the fader

level to “00.”

*²Normally, the + and – buttons work as the volume

control buttons. So you do not have to select “VOL”

to adjust the volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting preset sound modes

1 Call up the sound mode you want to

adjust.

You can select a preset sound adjustment

suitable to the music genre.

• See on the left column for

details.

Select the sound mode you want.

Each time you press the button,

the sound mode changes as

follows:

2 To adjust the bass or treble level.

1 Select “BAS” (bass) or “TRE” (treble).

SCM OFF

BEAT

SOFT

POP

2 Adjust the level.

Ex.: When you select “BEAT”

Indication For: Preset values

BAS TRE S.BASS

SCM OFF (Flat sound) 00

OFF

BEAT

Rock or

disco music

SOFT

Quiet

background

music

–3

OFF

To turn on or off the super bass function.

• See page 10 for details.

POP

Light music

Notes:

3 Repeat step 2 to adjust the other

• You can adjust each sound mode to your preference,

and store it in memory.

items.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

below.

• To adjust the bass and treble reinforcement levels or

to turn on/off the super bass function, see page 10.

4 Press and hold SCM until the sound

mode you have selected in step 1

flashes on the display.

Your adjustment made for

the selected sound mode is

stored in memory.

Storing your own sound

adjustments

5 Repeat the same procedure to store

other sound modes.

You can adjust the sound modes (BEAT, SOFT,

POP) to your preference and store your own

adjustments in memory.

To reset to the factory settings, repeat the

same procedure and reassign the preset values

listed in the table on the left column.

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

Download from Www.Somanuals.com. All Manuals Search And Download.

DETACHING THE C0NTROL PANEL

You can detach the control panel when leaving

the car.

Attaching the control panel

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

1 Insert the left side of the control

panel into the groove on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the right side of the control

panel to fix it to the panel holder.

2 Lift and pull the control panel out of

the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

Download from Www.Somanuals.com. All Manuals Search And Download.

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X

series with your unit (except for JVC MP3-

compatible CD changer).

If you have another CD changer, consult your

JVC car audio dealer for connections.

• For example, if your CD changer is one of the

KD-MK series, you need a cord (KS-U15K) for

connecting it to this unit.

Playing CDs

Select the CD changer (CD-CH).

Playback starts from the first track of

the first disc.

All tracks of all discs are played

back.

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “NO CD” will appears on the display.

If this happens, remove the magazine and

set the discs correctly.

• If no magazine is loaded in the CD changer,

“NO MAG” appears on the display. If this

happens, insert the magazine in the CD

changer.

Disc number

Track number

Note on One-Touch Operation:

When you press CD-CH, the power automatically

turns on. You do not have to press

on the power.

to turn

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

Download from Www.Somanuals.com. All Manuals Search And Download.

To fast-forward or reverse the track

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the CD

changer is playing).

Press and hold ¢

playing a CD, to fast-forward

the track.

, while

Press and hold

4, while playing a CD, to

reverse the track.

To go to the next or previous tracks

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Press ¢

briefly, while

playing a CD, to go ahead to

the beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next track is located and

played back.

Disc number

Press

4 briefly, while playing a CD, to go

Track number

back to the beginning of the current track.

Each time you press the button consecutively,

the beginning of the previous tracks is located

and played back.

Ex.: When disc number 3 is selected

Selecting CD playback modes

To play back tracks at random

(Random Play)

Each time you press the button,

CD random play mode changes

as follows:

RND1

RND2

Canceled

RND

Indicator

Mode

RND1

Plays at random

Lights

All tracks of the current

disc, then the tracks of

the next disc, and so on.

RND2

Flashes

All tracks of all discs

inserted in the

magazine.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the Adjust it to the optimum level.

minimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work at

all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

While holding SEL, press

for more than 2

seconds to reset the unit. (Your

preset adjustments will also be

erased.) (See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Signals are too weak.

Store stations manually.

• Static noise while listening

to the radio.

The antenna is not connected

firmly.

Connect the antenna firmly.

• A cassette tape cannot be

inserted.

You have tried to insert a

cassette in the wrong way.

Insert the cassette with the

exposed tape facing right.

• Cassette tapes become

hot.

This is not a malfunction.

• Tape sound is at very low

level and sound quality is

degraded.

The tape head is dirty.

Clean it with a head cleaning

tape.

• “NO CD” appears on the

display.

No disc is in the magazine.

Insert discs into the magazine.

Insert discs correctly.

Discs are inserted upside

down.

Discs are unplayable.

Insert playable discs.

Insert the magazine.

• “NO MAG” appears on the

display.

No magazine is loaded in the

CD changer.

• “RESET 8” appears on the

display.

This unit is not connected to

the CD changer correctly.

Connect this unit and the CD

changer correctly, then press

the reset button of the CD

changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the

CD changer.

• The CD changer does not

work at all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

While holding SEL, press

for more than 2

seconds to reset the unit. (Your

preset adjustments will also be

erased.) (See page 2.)

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

This unit requires very little attention, but you will

be able to extend the life of the unit if you follow

the instructions below.

To keep the tape clean

To clean the head

• Always store the cassettes in their storage

cases after use.

• Do not store cassettes in the following places:

– Subject to direct sunlight

– With high humidity

– At extremely hot temperatures

• Clean the heads after every 10 hours of use

using a wet-type head cleaning tape (available

at an audio store).

When the head becomes dirty, you may realize

the following symptoms:

– Sound quality is reduced.

– Sound level decreases.

– Sound drops out.

CAUTION:

• Do not play the cassettes with peeling labels;

otherwise, they can damage the unit.

• Tighten tapes to remove slack since loose tape

may become entangled with the mechanism.

• Do not leave a cassette in the cassette

compartment after use, as the tape may become

slack.

• Do not play dirty or dusty tapes.

• Do not touch the highly-polished head with any

metallic or magnetic tools.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

CASSETTE DECK SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Wow & Flutter: 0.15% (WRMS)

Fast-Wind Time: 190 sec. (C-60)

Frequency Response: 50 Hz to 14 000 Hz

(Normal tape)

Front:

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

Signal-to-Noise Ratio: 52 dB

Stereo Separation: 40 dB

to 20 000 Hz at no more than

0.8% total harmonic distortion.

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Rear:

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

2.0 V/20 kΩ load (250 nWb/m)

188 mm × 58 mm × 11 mm

Mass (approx.):

TUNER SECTION

1.3 kg (excluding accessories)

Frequency Range:

FM:

AM:

87.5 MHz to 108.0 MHz

531 kHz to 1 602 kHz

[FM Tuner]

Usable Sensitivity:

11.3 dBf (1.0 µV/75 Ω)

Design and specifications are subject to change

without notice.

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 2.0 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Download from Www.Somanuals.com. All Manuals Search And Download.

EN, IN

0604DTSMDTJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

KS-FX385/KS-FX385S/KS-FX385G/

KS-F185/KS-F185S/KS-F185G

Installation/Connection Manual

Buku Panduan Instalasi/Penyambungan

GET0225-006A

[UN]

0604DTSMDTJEIN

EN, IN

ENGLISH

INDONESIA

This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your

vehicle does not have this system, a voltage inverter is required, which can be purchased at

JVC car audio dealers.

Unit ini dirancang untuk dipakai pada tegangan 12 V DC, dengan sistem negatif yang

di-ground-kan. Jika peralatan anda tidak memiliki system ini, maka dibutuhkan sebuah perubah

tegangan, yang dapat dibeli di agen audio mobil JVC.

Parts list for installation and connection

The following parts are provided for this unit.

After checking them, please set them correctly.

Daftar alat-alat untuk instalasi dan penyambungan

Peralatan di bawah ini telah disediakan bersama-sama dengan unit.

Pastikan bahwa tidak ada peralatan yang hilang dan pasang dengan benar.

A / B

Hard case/Control panel

Kotak/Panel kontrol

Sleeve

Mounting sleeve

Trim plate

Power cord

Kabel listrik

Washer (ø5)

Ring (ø5)

Lock nut (M5)

Mur pengunci (M5)

Mounting bolt (M5 x 20 mm)

Baut pengganjal (M5 x 20 mm)

Rubber cushion

Bantalan karet

Handles

Handle

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require

information regarding installation kits, consult your JVC car audio dealer or a company supplying

kits.

INSTALASI (PEMASANGAN PADA DASBOARD)

Ilustrasi berikut akan menjelaskan instruksi umum untuk instalasi. Apabila anda membutuhkan

informasi lebih lanjut, silakan konsultasi dengan dealer audio mobil JVC terdekat ataupun

perusahaan alat-alat elektronik.

• If you are not sure how to install this unit correctly, have it installed by a qualified technician.

• Apabila anda tidak mengetahui dengan pasti bagaimana memasang unit ini dengan benar,

tanyakan pada teknisi yang berpengalaman untuk pemasangannya.

Do the required electrical connections.

Lakukan penyambungan listrik yang

diperlukan.

184 mm

53 mm

⁄

When you stand the unit, be

careful not to damage the fuse

on the rear.

Pada saat meletakkan unit pada

posisi berdiri, berhati-hatilah

agar sekering di bagian

belakang tidak rusak.

Bend the appropriate tabs to hold

the sleeve firmly in place.

Tekuk lempengan yang tepat untuk

menahan wadah unit secara kokoh

pada tempatnya.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal1-2_KS-FX385_185[UN]f.p65

21/5/04, 5:47 PM

Removing the unit

Before removing the unit, release the rear section.

Melepaskan unit

Sebelum melepaskan unit, lepaskan terlebih dahulu bagian belakangnya.

Insert the two handles, then pull them as illustrated so that

the unit can be removed.

Masukkan kedua handle, kemudian tarik seperti

diilustrasikan sehingga unit tersebut dapat dikeluarkan.

When using the optional stay/Pemasangan pilihan

When installing the unit without using the sleeve/Instalasi unit tanpa mounting

sleeve

In a Toyota for example, first remove the car radio and install the unit in its place.

Sebagai contoh untuk mobil Toyota, lepaskan radio mobil terlebih dahulu dan kemudian pasang unit di tempat

yang sama.

Stay (option)

Dudukan (pilihan)

Flat type screws (M5 x 8 mm)*

Baut tipe flat (M5 x 8 mm)*

Fire wall

* Not included with this unit.

* Tidak terdapat pada unit ini.

Dashboard

Dasboard

Bracket*

Bracket *

Flat type screws (M5 x 8 mm)*

Baut tipe flat (M5 x 8 mm)*

Screw (option)

Baut (pilihan)

Pocket

Bracket*

Bracket *

Note

: When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If

longer screws are used, they could damage the unit.

Catatan

: Saat memasang unit pada bracket, gunakan baut yang berukuran 8 mm. Baut yang lebih

panjang dapat merusak unit.

Install the unit at an angle of less than 30˚.

Pasang unit tersebut pada sudut kurang dari 30˚.

TROUBLESHOOTING

• The fuse blows.

PEMECAHAN MASALAH

• Sekering terbakar.

* Are the red and black leads connected correctly?

* Periksa apakah kabel merah dan hitam telah tersambung dengan benar?

• Power cannot be turned on.

• Unit tidak dapat dinyalakan.

* Is the yellow lead connected?

* Periksa apakah kabel kuning telah tersambung?

• No sound from the speakers.

• Tidak ada suara dari speaker.

* Is the speaker output lead short-circuited?

* Periksa apakah ada korsleting pada kabel speaker?

• Sound is distorted.

• Suara tidak jelas.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

* Periksa apakah output speaker telah di-ground-kan?

* Periksa apakah terminal “–” pada speaker kiri dan kanan telah di-ground-kan?

• Noise interfere with sounds.

• Derau yang menyertai suara.

* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

* Apakah terminal ground di belakang unit terhubung ke sasis mobil yang menggunakan kabel tipis

dan pendek?

• Unit becomes hot.

* Is the speaker output lead grounded?

• Unit menjadi panas.

* Are the “–” terminals of L and R speakers grounded in common?

* Periksa apakah speaker output telah di-ground-kan?

* Periksa apakah terminal “–” pada speaker kiri dan kanan telah di-ground-kan?

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal1-2_KS-FX385_185[UN]f.p65

21/5/04, 5:47 PM

ENGLISH

INDONESIA

ELECTRICAL CONNECTIONS

To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and

make all electrical connections before installing the unit.

PENYAMBUNGAN LISTRIK

Untuk mencegah terjadinya korsleting, sangat dianjurkan apabila anda mencabut terminal baterai

negatif dan memasang semua sambungan listrik sebelum memasang unit.

• Yakinkan kembali ground dari unit ini apakah sudah terpasang atau belum setelah

instalasi selesai.

• Be sure to ground this unit to the car’s chassis again after installation.

Notes:

• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your

JVC car audio dealer.

Catatan:

• Ganti sekering dengan sekering lain yang sesuai dengan syarat spesifikasi. Jika sekering sering

• Maximum input of the speakers should be more than 45 W at the rear and 45 W at the front, with

an impedance of 4 Ω to 8 Ω.

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.

terbakar, tanyakan pada dealer audio mobil JVC.

• Input maksimum speaker sebaiknya lebih dari 45 W pada bagian belakang dan 45 W pada

bagian depan dengan impedansi antara 4 Ω sampai 8 Ω.

• Untuk mencegah terjadinya korsleting, tutup ujung kabel yang tidak TERPAKAI dengan pita

insulator.

• Penyerap panas akan menjadi sangat panas setelah pemakaian. Berhati-hatilah untuk tidak

menyentuhnya saat memindahkan unit ini.

Heat sink

Penyerap panas

A Typical Connections/Penyambungan Khusus

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause

serious damage to this unit.

Sebelum menghubungkan listrik: Periksa kabel-kabel dalam peralatan anda dengan hati-hati.

Hubungan yang salah dapat menyebabkan kerusakan serius pada unit ini.

The leads of the power cord and those of the connector from the car body may be different in

color.

Kabel dalam kabel listrik dan juga konektor kendaraan memiliki warna yang berlainan.

1 Hubungkan petunjuk warna pada kabel power dalam urutan yang ditunjukkan pada ilustrasi di

1 Connect the colored leads of the power cord in the order specified in the illustration below.

2 Connect the antenna cord.

bawah.

2 Sambungkan kabel antena.

3 Finally connect the wiring harness to the unit.

3 Sambungkan sarung kabel dengan unit.

To CD Changer—only for KS-FX385/KS-FX385S/KS-FX385G (see diagram

)

Untuk CD changer—hanya untuk KS-FX385/KS-FX385S/KS-FX385G (lihat diagram

)

Rear ground terminal

Terminal ground

belakang

15 A fuse

Sekering 15 A

Not included with this unit

Tidak terdapat pada unit ini

Ignition switch

Kunci starter

Antenna terminal

Terminal antena

Black

Hitam

To metallic body or chassis of the car

Ke bagian logam atau rangka kendaraan

Yellow*²

Kuning*²

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch) (constant 12 V)

Ke terminal live pada kotak sekering yang tersambung ke baterai mobil

(melewati sakelar semula) (12 V konstan)

Line out (see diagram

)

Line out (lihat diagram

)

Fuse block

Kotak sekering

Red

Merah

Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

Sebelum memeriksa pengoperasian unit ini sebelum

pemasangan, ujung kabel ini harus tersambung

terlebih dahulu, jika tidak power tidak akan dapat

dinyalakan.

To an accessory terminal in the fuse block

Ke terminal aksesoris pada kotak sekering

Blue with white stripe

Biru dengan garis putih

To the remote lead of other equipment or automatic antenna if any (200 mA max.)

Untuk pengarah remote dari peralatan yang lain atau antena otomatis jika ada

(maksimum 200 mA)

White with black stripe

Putih dengan garis hitam

White

Putih

Gray with black stripe

Kelabu dengan garis

hitam

Gray

Green with black stripe

Green

Hijau

Purple with black stripe

Ungu dengan garis

hitam

Purple

Ungu

Kelabu Hijau dengan garis hitam

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Speaker kiri (depan)

Speaker kanan (depan)

Speaker kiri (belakang)

Speaker kanan (belakang)

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal3-4_KS-FX385_185[UN]f.p65

21/5/04, 5:49 PM

Connections Adding Other Equipment/Sambungan pada peralatan lain

Amplifier/Amplifier

You can connect an amplifier to upgrade your car stereo system.

• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so

that it can be controlled through this unit.

• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker

leads of this unit unused.

Anda dapat menghubungkan sebuah penguat suara untuk meningkatkan sistem stereo mobil

anda.

• Sambungkan ujung kabel remote (biru dengan garis putih) dengan ujung kabel remote

peralatan lain sehingga peralatan lain tersebut dapat dikontrol melalui unit ini.

• Cabut speaker dari sistem dan sambungkan pada amplifier. Biarkan ujung speaker yang

tidak terpakai.

Rear speakers

Speaker belakang

Remote lead

Y-connector (not supplied for this unit)

Kabel remote

Konektor-Y (tidak disertakan dalam unit ini)

INPUT

JVC Amplifier

Amplifier JVC

Remote lead (Blue with white stripe)

Kabel remote (Biru dengan garis putih)

Signal cord (not supplied for this unit)

Kabel sinyal (tidak disertakan dalam unit ini)

To the remote lead of other equipment or automatic antenna if any

Untuk pengarah remote dari peralatan yang lain atau antena otomatis

jika ada

LINE OUT

KS-FX385

KS-FX385S

KS-FX385G

KS-F185

KS-F185S

KS-F185G

FRONT

REAR

Front speakers

Speaker depan

*³Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not *³Pasanglah dengan ketat kabel ground ke bagian logam atau rangka kendaraan—dengan

coated with paint (if coated with paint, remove the paint before attaching the wire). Failure to

do so may cause damage to the unit.

bagian yang tidak tertutupi oleh cat (apabila tertutup oleh cat, buanglah cat sebelum

memasang kabel). Bila tidak dibuang, dapat mengakibatkan kerusakan serius.

CD Changer/CD changer

Only for KS-FX385/KS-FX385S/KS-FX385G/Hanya untuk KS-FX385/KS-FX385S/KS-FX385G

Refer also to page 13 of the INSTRUCTIONS.

Lihat juga ke halaman 13 dari BUKU PETUNJUK.

Connecting cord supplied for your CD changer

Hubungkan kabel listrik pada CD changer anda

CAUTION/PERHATIKAN

• Before connecting the CD changer, make sure that the unit

is turned off.

JVC CD changer

CD changer JVC

• Sebelum CD changer dihubungkan pada sumber listrik,

pastikan unit tersebut dalam keadaan mati.

KS-FX385

KS-FX385S

KS-FX385G

PRECAUTIONS on power supply and speaker connections:

• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the

unit will be seriously damaged.

PENCEGAHAN pada power supply dan sambungan speaker:

• JANGAN sambung ujung kabel speaker dengan baterai mobil. Hal ini dapat

mengakibatkan kerusakan serius pada unit.

• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker

wiring in your car.

• SEBELUM menyambung ujung kabel speaker dengan speaker, periksa dulu sistem

pengkabelan kendaraan anda.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instal3-4_KS-FX385_185[UN]f.p65

21/5/04, 5:56 PM

Indesit Freezer BA 139 PS User Manual
iSymphony MP3 Docking Station T Speaker User Manual
Kenmore Microwave Oven 88329 User Manual
Kenwood Automobile Accessories 755 AV User Manual
Kenwood Car Stereo System DPX MP3120 User Manual
Keys Fitness Home Gym ST FIDL User Manual
KitchenAid Water Dispenser KHWL160PWH0 User Manual
KitchenAid Water Dispenser Series KHWG160 User Manual
Konica Minolta All in One Printer 4695MF User Manual
Konica Minolta Printer C10P User Manual