JVC Answering Machine GR DVL105 User Manual

ENGLISH  
CONTENTS  
AUTOMATIC DEMONSTRATION 5  
DIGITAL VIDEO CAMERA  
GETTING STARTED  
6 – 11  
RECORDING  
12 – 28  
Basic Recording................................. 12  
Advanced Features ............................ 19  
GR-DVL105  
PLAYBACK  
29 – 35  
Basic Playback.................................. 29  
Advanced Features ............................ 30  
Basic Connections .............................. 32  
Advanced Connections ......................... 34  
Please visit our Homepage on the World Wide  
Web and answer our Consumer Survey  
(in English only):  
DUBBING  
36 – 38  
Dubbing To A VCR ............................. 36  
Dubbing To A Video Unit  
Equipped With A DV Connector ............ 37  
Dubbing From A Video Unit Equipped  
With A DV Connector ........................ 38  
USING THE REMOTE  
CONTROL UNIT  
39 – 49  
Slow-Motion Playback, Frame-By-Frame  
Playback and Playback Zoom .............. 41  
Playback Special Effects ...................... 42  
Random Assemble Editing .................... 43  
For More Accurate Editing .................... 47  
Audio Dubbing .................................. 49  
TROUBLESHOOTING  
INDEX  
50 – 56  
57 – 61  
Indications ...................................... 57  
Controls, Connectors And Indicators ........ 60  
USER MAINTENANCE  
CAUTIONS  
62  
63 – 65  
66 – 67  
68 – 69  
TERMS  
SPECIFICATIONS  
INSTRUCTIONS  
LYT0626-001A  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN3  
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all  
sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).  
Do not block the ventilation holes.  
(If the ventilation holes are blocked by a newspaper, or cloth etc. heat may not be able to get out.)  
No naked flame sources, such as lighted candles, should be placed on the apparatus.  
When discarding batteries, environmental problems must be considered and local rules or laws governing  
the disposal of these batteries must be followed strictly.  
The apparatus shall not be exposed to dripping or splashing.  
Do not use this equipment in a bathroom or places with water.  
Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases,  
potted plants, cups etc.) on top of this unit.  
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)  
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to  
the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.  
CAUTION!  
The following notes concern possible physical damage to the camcorder and to the user.  
When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or  
holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a  
malfunction.  
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the  
camcorder, as they are particularly susceptible to this type of injury.  
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the  
camcorder.  
CAUTION!  
Connecting cables (Audio/Video, S-Video, Editing, DC, etc.) to the camcorder and leaving the unit on top  
of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in  
damage.  
This camcorder is designed exclusively for the digital video cassette. Only cassettes marked  
can be used with this unit.  
Before recording an important scene . . .  
.... make sure you only use cassettes with the Mini DV mark  
.
.... remember that this camcorder is not compatible with other digital video formats.  
.... remember that this camcorder is intended for private consumer use only. Any commercial use without  
proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for  
personal enjoyment, it is strongly recommended that you obtain permission beforehand.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROVIDED ACCESSORIES  
4
EN  
AC Power  
Adapter/Charger  
AA-V40A/AS  
Remote  
Control Unit  
RM-V716U  
Battery Pack  
BN-V408U  
Shoulder Strap  
AAA (R03) Battery x 2  
(for remote control unit)  
Lens Cap  
(Already attached  
to the camcorder)  
Audio/Video Cable  
(ø3.5 mini-plug to  
RCA plug)  
Editing Cable  
Both plugs have 1 ring  
around the pin.  
DC Cord  
Core Filter  
(for optional S-Video cable)  
Core Filter  
(for optional PC Connection  
cable provided with optional  
HS-V14KIT software)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN5  
How To Attach The Core Filter  
Attach the provided Core Filter to an optional S-Video cable, the PC connection cable provided with optional  
HS-V14KIT software. The Core Filter reduces interference.  
1
2
3
3 cm  
Stopper  
Wind once  
Release the  
Run the cable through the Core Filter, leaving approx.  
Close the Core Filter until it  
clicks shut.  
stoppers on both 3 cm of cable between the cable plug and the Core  
ends of the Core  
Filter.  
Filter. Wind the cable once around the outside of the  
Core Filter as shown in the illustration.  
Wind the cable so that it is not slack.  
NOTE:  
Take care not to damage the cable.  
When connecting cables, attach the end with the Core Filter to the camcorder.  
AUTOMATIC DEMONSTRATION  
Automatic Demonstration takes place when  
DEMO. MODEis set to ON(factory-preset).  
MENU/BRIGHT Wheel  
Available when the Power Switch is set to “ ” or “  
and no cassette is in the camcorder.  
Performing any operation during the demonstration stops  
the demonstration temporarily. If no operation is per-  
formed for more than 1 minute after that, the demonstra-  
tion will resume.  
DEMO. MODEremains ONeven if the camcorder  
power is turned off.  
To cancel Automatic Demonstration, set the Power  
Switch to “ ”, then press MENU/BRIGHT while the  
demo is in progress. This takes you directly to the demo  
modes Setting Menu (so you will not have to go through  
the Menu Screen). Rotate MENU/BRIGHT to select  
OFFand press it. The normal screen appears.  
CAMERA MENU  
1RETURN  
REC MODE  
SOUND MODE  
ZOOM  
GA I N UP  
TALLY  
I D NUMBER  
DEMO. MODE ON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
6
EN  
Power  
This camcorders 2-way power supply system lets you  
choose the most appropriate source of power. Do not use  
provided power supply units with other equipment.  
To AC outlet  
Battery pack  
BN-V408U,  
BN-V416U or  
BN-V428U  
CHARGING THE BATTERY PACK  
Make sure you unplug the camcorders DC cord from  
1
2
3
the AC Power Adapter/Charger. Plug the AC Adapter/  
Chargers power cord into an AC outlet. The POWER  
indicator lights.  
AC Power  
Adapter/Charger  
POWER  
indicator  
Attach the battery pack with the  
mark aligned  
DC OUT connector  
with the corresponding marks on the AC Power  
Adapter/Charger. The CHARGE Indicator begins  
blinking to indicate charging has started.  
CHARGE indicator  
Battery pack  
Fully charging time  
approx. 1 hr. 30 min.  
approx. 2 hrs.  
When the CHARGE indicator stops blinking but stays  
lit, charging is finished. Slide the battery and lift off.  
Remember to unplug the AC Adapter/Chargers  
power cord from the AC outlet.  
BN-V408U  
BN-V416U (optional)  
BN-V428U (optional)  
approx. 3 hrs. 20 min.  
NOTES:  
If the protective cap is attached to the battery pack, remove it first.  
Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature  
range for charging. If the environment is too cold, charging may be incomplete.  
Charging times noted above are for a fully discharged battery pack.  
Charging time varies according to the ambient temperature and the status of the battery pack.  
To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.  
If you connect the camcorders DC cord to the adapter during battery charging, power is supplied to the  
camcorder and charging stops.  
Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to  
use it only in well-ventilated areas.  
When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may  
not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.  
If the battery operation time remains extremely short even after having been fully charged, the battery is  
worn out and needs to be replaced. Please purchase a new one.  
About Batteries  
DANGER! Do not attempt to take the batteries apart, or  
expose them to flame or excessive heat, as it may cause a  
fire or explosion.  
WARNING! Do not allow the battery or its terminals to  
come in contact with metals, as this can result in a short  
circuit and possibly start a fire.  
The Benefits Of Lithium-Ion Batteries  
Lithium-ion is vulnerable in colder  
temperatures.  
Lithium-ion battery packs are small but have a large power  
capacity. However, when one is exposed to cold  
temperatures (below 10°C), its usage time becomes shorter  
and it may cease to function. If this happens, place the  
battery pack in your pocket or other warm, protected  
place for a short time, then re-attach it to the camcorder.  
As long as the battery pack itself is not cold, it should not  
affect performance.  
(If youre using a heating pad, make sure the battery pack  
does not come in direct contact with it.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN7  
USING THE BATTERY PACK  
BATTERY RELEASE  
Button  
Tilt the viewfinder upward 1.  
1
1
With the arrow on the battery pack pointing  
downward, push the battery pack slightly against the  
battery pack mount 2, then slide down the battery  
pack until it locks in place 3.  
2
3
2
If the battery pack is attached with its  
mark set  
in the wrong direction, a malfunction may occur.  
To Detach The Battery Pack . . .  
.... tilt the viewfinder upward  
1
and slide the battery pack  
up slightly while pressing BATTERY RELEASE to detach it.  
Approximate recording time  
ATTENTION:  
Before detaching the power source,  
make sure that the camcorders power  
is turned off. Failure to do so can result  
in a camcorder malfunction.  
Battery pack  
LCD monitor on/  
Viewfinder off  
LCD monitor off/  
Viewfinder on  
BN-V408U  
1 hr.  
(35 min.)  
1 hr. 15 min.  
(40 min.)  
BN-V416U  
(optional)  
2 hrs.  
(1 hr. 10 min.)  
2 hrs. 30 min.  
(1 hr. 20 min.)  
INFORMATION:  
VU-V856KIT is a set composed of the  
BN-V856U battery pack and AA-V80EG AC  
Power Adapter/Charger. Read the VU-V856KITs  
instruction manuals before using.  
It is impossible to charge the BN-V856U battery  
pack using the provided AC Power Adapter/  
Charger. Use the optional AA-V80EG AC Power  
Adapter/Charger.  
BN-V428U  
(optional)  
3 hrs. 30 min.  
(2 hrs.)  
4 hrs. 20 min.  
(2 hrs. 20 min.)  
BN-V856U  
(optional)  
7 hrs.  
(4 hrs.)  
8 hrs. 40 min.  
(4 hrs. 40 min.)  
(
) : when the video light is on.  
NOTES:  
Recording time is reduced significantly under the following conditions:  
Zoom or Record-Standby mode is engaged repeatedly.  
The LCD monitor is used repeatedly.  
The playback mode is engaged repeatedly.  
Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned  
shooting time.  
USING AC POWER  
Use the AC Power Adapter/Charger (connect as shown in the illustration).  
NOTES:  
The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to  
240 V.  
To AC outlet  
For other notes, pg. 6.  
Power cord  
AC Power  
Adapter/Charger  
To DC Input  
connector  
To DC OUT  
connector  
DC cord  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
Grip Adjustment  
8
EN  
Separate the Velcro strip.  
Power  
1
2
3
Zoom Lever  
Pass your right hand through the loop and grasp  
the grip.  
Recording  
Start/Stop button  
Adjust so that your thumb and fingers can easily  
operate the Recording Start/Stop Button and  
Power Zoom Lever. Refasten the Velcro strip.  
Power Switch  
Viewfinder Adjustment  
Dioptre Adjustment  
Control  
Set the Power Switch to “ ” or “ ” while  
pressing down the Lock Button located on the  
switch.  
1
2
Turn the Dioptre Adjustment Control until the  
indications in the viewfinder are clearly  
focused.  
PAUSE  
Shoulder Strap Attachment  
Make sure the battery pack or DC cord is  
1
removed. Following the illustration, thread the  
strap through the eyelet 1, then fold it back and  
thread it through the buckle 2. Repeat the  
procedure to attach the other end of the strap to  
the other eyelet 3 located under the Grip Strap,  
making sure the strap is not twisted.  
1
2
3
Tripod Mounting  
Align the screw and camera direction stud on  
1
the tripod with the cameras mounting socket  
and stud hole. Then tighten the screw.  
Some tripods are not equipped with studs.  
CAUTION:  
When using a tripod, be sure to open and  
extend its legs fully to stabilise the  
camcorder. To prevent damage to the unit  
caused by falling over, do not use a small-  
sized tripod.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN9  
MENU/BRIGHT Wheel  
Date/Time Settings  
The date/time is recorded onto the tape at all times, but its  
display can be turned on or off during playback  
(pg. 30).  
Set the Power Switch to “ ” while pressing down  
the Lock Button located on the switch. The power  
lamp lights and the camcorder is turned on.  
1
Press MENU/BRIGHT. The Menu Screen appears.  
2
3
4
Rotate MENU/BRIGHT to select “ ”. Press it and  
DISPLAY MENUappears.  
Power Switch  
Rotate MENU/BRIGHT to select CLOCK ADJ..  
Press it and dayis highlighted.  
Rotate MENU/BRIGHT to input the day. Press it.  
Repeat to input the month, year, hour and minute.  
Rotate MENU/BRIGHT to select 1RETURN, and  
press it twice. The Menu Screen closes.  
Lock Button  
Power lamp  
Display  
NOTE:  
Even if you select CLOCK ADJ., if the parameter is not  
highlighted the camcorders internal clock continues to  
operate. Once you move the highlight bar to the first date/  
time parameter (day), the clock stops. When you finish  
setting the minute and press MENU/BRIGHT, the date and  
time begin operation from the date and time you just set.  
FADER WI PE  
/
WI PE SCROLL  
WI PE SHUTTER  
RANDO  
M
4
OFF  
FADER  
WH I TE  
FADER BLACK  
FADER  
MOSA I C  
D I SPLAY MENU  
DISPLAY MENU  
1RETURN  
ON SCREEN  
DATE  
/
T
I ME  
T I ME CODE  
CLOCK ADJ.  
1
.
1
.
00  
:
12 00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
10  
EN  
Loading/Unloading A Cassette  
Erase protection tab*  
The camcorder needs to be powered up to load or eject a  
cassette.  
Make sure the  
window side is  
facing out.  
Slide and hold OPEN/EJECT in the direction of the  
1
2
arrow then pull the cassette holder cover open until it  
locks. The cassette holder opens automatically.  
Do not touch internal components.  
Cassette holder  
OPEN/EJECT Switch  
Insert or remove a tape and press PUSH HEREto  
close the cassette holder.  
Once the cassette holder is closed, it recedes  
automatically. Wait until it recedes completely  
before closing the cassette holder cover.  
When the batterys charge is low, you may not be  
able to close the cassette holder cover. Do not  
apply force. Replace the battery with a fully charged  
one before continuing.  
Close the cassette holder cover firmly until it locks  
into place.  
Cassette holder  
cover  
3
PUSH HERE  
Approximate recording time  
Recording mode  
Tape  
* To Protect Valuable Recordings . . .  
.... slide the erase protection tab on the back of  
the tape in the direction of SAVE. This  
prevents the tape from being recorded over.  
To record on this tape, slide the tab back to  
RECbefore loading it.  
SP  
LP  
30 min.  
60 min.  
80 min.  
30 min.  
60 min.  
80 min.  
45 min.  
90 min.  
120 min.  
NOTES:  
It takes a few seconds for the cassette holder to open. Do not apply force.  
If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try  
again. If the cassette holder still does not open, turn the camcorder off then on again.  
If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few  
minutes later, insert it again.  
When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before  
opening the cassette holder cover.  
Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.  
Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is  
closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on  
before loading or unloading.  
When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the  
tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder  
came out or not. See page 17 for information about recording from the middle of a tape.  
Loosen the Grip Strap if it appears to interfere with the cassette holder cover operation (pg. 8).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN11  
MENU/BRIGHT Wheel  
Recording Mode Setting  
Set the tape recording mode depending on your preference.  
Set the Power Switch to “ ” while pressing down  
the Lock Button located on the switch. The power  
lamp lights and the camcorder is turned on.  
1
Press MENU/BRIGHT. The Menu Screen appears.  
2
3
4
Rotate MENU/BRIGHT to select “ ” and press it.  
CAMERA MENUappears.  
Rotate MENU/BRIGHT to select REC MODEand  
press it. The Sub Menu appears. Select SPor LP”  
by rotating MENU/BRIGHT and press it. Rotate  
MENU/BRIGHT to select 1RETURN, and press it  
twice. The Menu Screen closes.  
Power Switch  
Lock Button  
Audio Dubbing (pg. 49) is impossible on a tape  
recorded in the LP mode.  
•“LP(Long Play) is more economical, providing  
1.5 times the recording time.  
Power lamp  
Display  
NOTES:  
If the recording mode is switched during recording, the  
playback picture will be blurred at the switching point.  
It is recommended that tapes recorded in the LP mode  
on this camcorder be played back on this camcorder.  
During playback of a tape recorded on another  
camcorder, blocks of noise may appear or there may be  
momentary pauses in the sound.  
CAMERA MENU  
1RETURN  
Menu Screen  
Sub Menu  
REC MODE  
SOUND MODE  
ZOOM  
SP  
LP  
GA I N UP  
TALLY  
I D NUMBER  
DEMO. MODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording  
12  
EN  
NOTE:  
Power Switch  
You should already have performed the procedures listed  
below. If not, do so before continuing.  
Power (pg. 6)  
Lock Button  
Power lamp  
Grip Adjustment (pg. 8)  
Viewfinder Adjustment (pg. 8)  
Load A Cassette (pg. 10)  
Recording Mode Setting (pg. 11)  
Recording  
Start/Stop Button  
Press in the tabs on the lens cap to remove it.  
1
2
Set the Power Switch to “ ” or “ ” while pressing  
down the Lock Button located on the switch.  
Shooting while using the LCD monitor: Press PUSH  
OPEN and open the LCD monitor fully. Tilt it upward/  
downward for best viewability.  
Shooting while using the viewfinder: Close the LCD  
monitor.  
During  
shooting  
The power lamp lights and the camcorder enters the  
Record-Standby mode. PAUSEis displayed.  
Display  
Press the Recording Start/Stop Button. “  
appears  
25  
Tape remaining  
time indicator  
(Approximate)  
3
while recording is in progress.  
To Stop Recording . . .  
.... press the Recording Start/Stop Button. The camcorder  
re-enters the Record-Standby mode.  
min  
(Now calculating)  
3 min  
90 min  
89 min  
0 min  
(Blinking)  
1 min  
(Blinking)  
2 min  
(Blinking)  
To Adjust The Brightness Of The Display  
.... rotate MENU/BRIGHT until the bright level indicator  
on the display moves and the appropriate brightness is  
reached.  
Tally lamp  
(lights while  
recording is  
in progress)  
MENU/  
BRIGHT Wheel  
+
BR I GHT  
180°  
90°  
PUSH OPEN Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN13  
Power Switch Position  
(Manual) : Allows you to set various recording functions using the  
Menus. If you want more creative capabilities than Full  
Auto recording, try this mode.  
F. AUTO  
(Full Auto) : Allows you to record using NO special effects or  
manual adjustments. Suitable for standard recording.  
When the Power Switch is set  
OFF  
: Allows you to switch off the camcorder.  
to “ ”, F. AUTOappears.  
: Allows you to play back a recording on the tape.  
When set to “ ” or “  
,  
there is no indication.  
NOTES:  
When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this  
happens, use the viewfinder instead.  
The image will not appear simultaneously in the LCD monitor and the viewfinder .  
The cassette holder cannot be opened unless a power supply is attached.  
There may be a delay after you open the cassette holder cover until the cassette holder opens. Do not use force.  
Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing  
the cassette holder cover.  
The time required to calculate and display the remaining tape length, and the accuracy of the calculation,  
may vary according to the type of tape used.  
TAPE ENDappears when the tape reaches its end, and the power goes off automatically if left in this  
condition for 5 minutes. TAPE ENDalso appears when a cassette at its end is loaded.  
If the Record-Standby mode continues for 5 minutes, the camcorders power shuts off automatically. To turn  
the camcorder on again, set the Power Switch to OFF, then back to “ ” or “ ”.  
When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors  
may occur when editing the tape. To avoid this, refer to Recording from the middle of a tape(pg. 17).  
During recording, sound is not heard from the speaker.  
To turn the tally lamp off during recording, pg. 20, 21.  
To remove the indications from the camcorders display during recording, pg. 20, 23.  
JOURNALISTIC SHOOTING  
In some situations, different shooting angles may provide  
more dramatic results. Hold the camcorder in the desired  
position and tilt the LCD monitor in the most convenient  
direction. It can rotate 270° (90° downward, 180°  
upward).  
Self-Recording  
SELF-RECORDING  
You can shoot yourself while viewing your own image in  
the LCD monitor. Open the LCD monitor and tilt it upward  
180° so that it faces forward, then point the lens toward  
yourself and start recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording (cont.)  
14  
EN  
Power Switch  
Lock Button  
Snapshot  
This feature lets you record still images that look like  
photographs onto a tape.  
SNAPSHOT MODE SELECTION  
SNAPSHOT Button  
Set the Power Switch to “ ” or “ ” while pressing  
1
2
down the Lock Button located on the switch.  
MODE  
Button  
Choose the appropriate Snapshot mode from the 5  
available by repeatedly pressing MODE until the  
desired snapshot mode indicator appears.  
SNAPSHOT RECORDING  
Press SNAPSHOT.  
1 If you press during Record-Standby . . .  
.... PHOTOappears and a still image will be  
recorded for approx. 6 seconds, then the  
camcorder re-enters the Record-Standby mode.  
If you press during Recording . . .  
.... PHOTOappears and a still image will be  
recorded for approx. 6 seconds, then the normal  
recording resumes.  
Display  
Motor Drive Mode  
Snapshot mode  
FULL  
Keeping SNAPSHOT pressed provides an effect similar to  
serial photography. (Interval between still images: approx.  
1 second)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN15  
NOTES:  
FRAME  
Snapshot mode  
with frame*  
Even if MULTI-4or MULTI-9is engaged, Snapshot  
recording will be performed in the FULL mode during  
Digital Zoom.  
If Snapshot recording is not possible, PHOTOblinks  
when SNAPSHOT is pressed.  
If Programme AE with special effects (pg. 26) is  
engaged, certain modes of Programme AE with special  
effects are disabled during Snapshot recording. In such a  
case, the icon blinks.  
If SNAPSHOT is pressed when DISis set to ON”  
(pg. 22), the Stabiliser will be disabled.  
During playback as well, all Snapshot modes are  
available. The shutter sound is not heard.  
During Snapshot recording, the image displayed in the  
viewfinder may be partially missing. However, there is  
no effect in the recorded image.  
FULL  
Snapshot mode  
with no frame*  
When a cable is connected to the AV connector, the  
shutter sound is not heard from the speaker, however it  
is recorded onto the tape.  
MULTI-4  
Multi-Analyser 4  
will appear while the snapshot is being taken.  
MULTI-9  
Multi-Analyser 9  
PIN-UP  
Pin-Up mode*  
* There is the sound effect of a shutter closing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording (cont.)  
16  
EN  
Zoom in (T: Telephoto)  
FEATURE: Zooming  
1
x
W
T
PURPOSE:  
10  
x
W
T
20  
xW  
T
To produce the zoom in/out effect, or an instantaneous  
change in image magnification.  
40  
xW  
T
OPERATION:  
Zoom In  
Slide the Power Zoom Lever towards T.  
Zoom out (W: Wide angle)  
Zoom Out  
Slide the Power Zoom Lever towards W.  
The further you slide the Power Zoom Lever, the  
quicker the zoom action.  
Zoom display  
NOTES:  
Focusing may become unstable during Zooming. In  
this case, set the zoom while in Record-Standby,  
lock the focus by using the manual focus  
(pg. 19), then zoom in or out in Record mode.  
Zooming is possible to a maximum of 450X, or it  
can be switched to 10X magnification using the  
optical zoom (pg. 21).  
10  
x
W
T
Digital zoom  
zone  
10X (optical)  
zoom zone  
Zoom magnification of over 10X is done through  
Digital image processing, and is therefore called  
Digital Zoom.  
Approximate zoom ratio  
During Digital zoom, the quality of image may  
suffer.  
Digital zoom cannot be used when digital image  
processing, such as Picture Wipe/Dissolve  
(pg. 24, 25) or Video Echo (pg. 26), is activated.  
Macro shooting (as close as approx. 5 cm to the  
subject) is possible when the Power Zoom Lever is  
set all the way to W. Also see TELE MACROin  
the Menu Screen on page 22.  
Power Zoom Lever  
Power Switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN17  
NOTE: Recording From The Middle Of A Tape  
Time Code  
During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded  
scene on the tape during playback.  
If recording starts from a blank portion, the time code begins counting from 00:00:00”  
(minute:second:frame). If recording starts from the end of a previously recorded scene, the time code  
continues from the last time code number.  
To perform Random Assemble Editing (pg. 43 48), time code is necessary. If during recording a blank  
portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time  
code starts counting up again from 00:00:00. This means the camcorder may record the same time  
codes as those existing in a previously recorded scene. To prevent this, perform Recording From The  
Middle of A Tapebelow in the following cases;  
When shooting again after playing back a  
recorded tape.  
Display  
When power shuts off during shooting.  
When a tape is removed and re-inserted during  
shooting.  
When shooting using a partially recorded tape.  
When shooting on a blank portion located  
partway through the tape.  
Frames are not displayed  
during recording.  
Minutes  
Seconds  
When shooting again after shooting a scene  
then opening/closing the cassette holder cover.  
Frames  
(25 frames = 1 second)  
:
:
TC 12 34 24  
Recording From The Middle Of A Tape  
1. Play back a tape to find the spot at which you want to start recording, then engage the Still Playback  
mode (pg. 29).  
2. Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch, then  
start recording.  
NOTES:  
The time code cannot be reset.  
During fast-forwarding and rewinding, the time code indication does not move smoothly.  
The time code is displayed only when TIME CODEis set to ON(pg. 23, 30).  
When a blank portion is recorded on a tape  
Time code  
00:00:00  
Time code  
05:43:21  
Time code  
00:00:00  
Tape  
Already recorded scene  
Blank  
Newly recorded scene  
Shooting start point  
Shooting stop point  
Shooting start point  
Proper recording  
Time code  
00:00:00  
Time code  
05:43:21  
Time code  
05:44:00  
Tape  
Already recorded scene  
New scene  
Latest scene  
Shooting start point  
Shooting start point  
Shooting start point  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording (cont.)  
18  
EN  
FEATURE: Video Light  
PURPOSE:  
To brighten the scene when natural lighting is too dim.  
OPERATION:  
Set LIGHT OFF/AUTO/ON as required:  
OFF : Turns off the light.  
AUTO : Automatically turns on the light when the  
camcorder senses insufficient lighting on the  
subject.  
LIGHT OFF/AUTO/ON Switch  
(Open the LCD monitor to  
access this switch.)  
ON  
: Always keeps the light on as long as the  
camcorder is turned on.  
The video light can only be used with the  
camcorders power on.  
It is recommended to set the white balance  
DANGER  
(pg. 28) to  
when you use the video light.  
The video light can become  
extremely hot. Do not touch  
it either while in operation or  
soon after turning it off,  
When not using the video light, turn it off to save  
battery power.  
NOTES:  
Even if the battery indicator (  
) does not blink  
otherwise serious injury may  
result.  
Do not place the camcorder into the  
carrying case immediately after using the  
video light, since it remains extremely  
hot for some time.  
When operating, keep a distance of  
about 30 cm between the video light and  
people or objects.  
Do not use near flammable or explosive  
materials.  
due to low battery charge, the camcorder may turn  
off automatically when you turn on the video light,  
or when you start recording with the video light  
turned on.  
When LIGHT OFF/AUTO/ON is set to AUTO:  
Depending on the lighting conditions, the video  
light may keep turning on and off. In this case,  
manually switch the light on or off using LIGHT  
OFF/AUTO/ON.  
While the SHUTTERmode (pg. 26) is  
engaged, the light is likely to stay on.  
While the TWILIGHTmode (pg. 26) is  
engaged, the light will not activate.  
It is recommended that you consult your  
nearest JVC dealer for replacing the video  
light.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features  
EN19  
While focusing on a further  
subject  
While focusing on a nearer  
subject  
Focus detection zone  
FEATURE: Auto Focus  
PURPOSE:  
The camcorders Full Range AF system offers continuous shooting ability from close-up (as close as approx.  
5 cm to the subject) to infinity.  
However, correct focus may not be obtainable in the situations listed below (in these cases use manual  
focusing):  
When two subjects overlap in the same scene.  
When illumination is low.*  
When the subject has no contrast (difference in brightness and darkness), such as a flat, one-colour wall,  
or a clear, blue sky.*  
When a dark object is barely visible in the viewfinder.*  
When the scene contains minute patterns or identical patterns that are regularly repeated.  
When the scene is affected by sunbeams or light reflecting off the surface of a body of water.  
When shooting a scene with a high-contrast background.  
* The following low-contrast warnings appear blinking:  
,
,
and  
NOTES:  
If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a  
piece of soft cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry  
naturally.  
When shooting a subject close to the lens, zoom out first (pg. 16). If zoomed-in in the auto focus  
mode, the camcorder may automatically zoom out depending on the distance between the camcorder  
and the subject. This will not occur when TELE MACRO(pg. 22) is activated.  
FEATURE: Manual Focus  
PURPOSE:  
To obtain correct focus.  
OPERATION:  
1) If you are using the viewfinder, you should already have made the necessary viewfinder adjustments  
(pg. 8).  
2) Set the Power Switch to “ ”, then press FOCUS (3). The manual focus indicator appears.  
3) To focus on a farther subject, rotate MENU/BRIGHT towards +. “ ” appears and blinks.  
To focus on a nearer subject, rotate MENU/BRIGHT towards . “ ” appears and blinks.  
4) Press MENU/BRIGHT. Focus adjustment is complete.  
To reset to Auto Focus, press FOCUS (3) twice or set the Power Switch to “ ”.  
If FOCUS (3) is pressed once, the camcorder will enter the focus adjustment mode again.  
NOTES:  
Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If  
you focus in on a subject in the wide-angle position, sharply focused images cannot be obtained when  
zoomed up because the depth-of-field is reduced at longer focal lengths.  
When the focus level cannot be adjusted any further or closer, “ ” or “ ” will blink.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
20  
EN  
Power Switch  
Lock Button  
Using Menus For Detailed Adjustment  
MENU/BRIGHT Wheel  
This camcorder is equipped with an easy-to-use,  
on-screen menu system that simplifies many of the more  
detailed camcorder settings (pg. 21 23).  
Set the Power Switch to “ ” while pressing down  
1
2
3
the Lock Button located on the switch.  
Press MENU/BRIGHT. The Menu Screen appears.  
Display  
Rotate MENU/BRIGHT to select the desired function  
icon, and press it. The selected function menu  
appears.  
FADER WI PE  
/
Menu Screen  
WI PE SCROLL  
WI PE SHUTTER  
RANDO  
M
4
OFF  
Function menu setting depends on the function.  
FADER  
WH I TE  
4 If you have selected “  
FADER BLACK  
, “ ”, “ ” or “ ” . . .  
FADER  
MOSA I C  
.... see pg. 21.  
If you have selected “ ”, “ ” or “ ” . . .  
.... go to step 5.  
CAMERA MENU  
Rotate MENU/BRIGHT to select the desired function  
and press it. The Sub Menu appears.  
Then, rotate MENU/BRIGHT to select the parameter,  
and press it. Selection is complete.  
1RETURN  
REC MODE  
SOUND MODE  
ZOOM  
GA I N UP  
TALLY  
SP  
LP  
5
6
I D NUMBER  
DEMO. MODE  
Rotate MENU/BRIGHT to select 1RETURNand  
press it twice. The Menu Screen closes.  
The  
icon represents END.  
MANUAL MENU  
ON  
1RETURN  
D I S  
TELE MACRO OFF  
WI DE MODE  
WI ND CUT  
CAM RESET  
Sub Menu  
D I SPLAY MENU  
1RETURN  
ON SCREEN  
DATE  
/
T
I ME  
T I ME CODE  
CLOCK ADJ.  
1
.
1
.
00  
:
12 00  
END  
Normal Screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN21  
Menu Screen Explanations  
Refer to Fade/Wipe Effects(pg. 24, 25).  
FADER/WIPE  
P.AE/EFFECT  
EXPOSURE  
W.BALANCE  
Refer to Programme AE With Special Effects(pg. 26).  
Refer to Exposure Controland Iris Lock(pg. 27).  
Refer to White Balance Adjustmentand Manual White Balance Operation”  
(pg. 28).  
REC MODE  
Allows you to set the recording mode (SP or LP) depending on your prefer-  
ence (pg. 11).  
SOUND  
MODE  
12 BIT  
Enables recording of stereo sound on four separate channels, and is recom-  
mended for use when performing audio dubbing (pg. 49). (Equivalent to  
the 32 kHz mode of previous models)  
16 BIT  
10X  
Enables recording of stereo sound on two separate channels. (Equivalent to  
the 48 kHz mode of previous models)  
When set to 10Xwhile using digital zoom, the zoom magnification will  
reset to 10X since digital zoom will be disengaged.  
ZOOM  
40X  
Allows you to use the Digital Zoom. By digitally processing and magnifying  
images, zooming is possible from 10X (the optical zoom limit), to a maximum  
of 40X digital magnification.  
450X  
Allows you to use the Digital Zoom. By digitally processing and magnifying  
images, zooming is possible from 10X (the optical zoom limit), to a maximum  
of 450X digital magnification.  
GAIN UP OFF  
AGC  
Allows you to shoot dark scenes with no picture brightness adjustment.  
The overall appearance may be grainy, but the image is bright.  
AUTO  
The shutter speed is automatically adjusted (1/25 1/200 sec.). Shooting a  
subject in low or poor lighting at 1/25 sec. shutter speed provides a brighter  
image than in the AGC mode, but the subjects movements are not smooth or  
natural. The overall appearance may be grainy. When the shutter speed is  
automatically adjusted, “  
is displayed.  
ON  
The tally lamp comes on to signal the start of recording.  
The tally lamp remains off at all times.  
TALLY  
OFF  
This number is necessary when connecting the camcorder to a device such as a computer  
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.  
ID  
NUMBER  
: Factory-preset  
NOTES:  
The “  
REC MODEcan be set when the Power Switch is set to “ ” or “  
CAMERA MENUsettings are effective when the Power Switch is set to both “ ” and “ ”.  
(pg. 11, 30).  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
22  
EN  
Menu Screen Explanations (cont.)  
DEMO.  
MODE  
Demonstrates certain functions such as Programme AE with special effects,  
etc., and can be used to confirm how these functions operate. When DEMO.  
MODEis set to ONand the Menu Screen is closed, demonstration starts.  
Performing any operation during the demonstration stops the demonstration  
temporarily. If no operation is performed for more than 1 minute after that,  
the demonstration will resume.  
ON  
NOTES:  
If a tape is in the camcorder, the demonstration cannot be turned on.  
DEMO. MODEremains ONeven if the camcorder power is turned off.  
If DEMO. MODEremains ON, some functions will not be available.  
After viewing demo, set to OFF.  
Automatic demonstration will not take place.  
OFF  
ON  
DIS  
To compensate for unstable images caused by camera-shake, particularly at  
high magnification.  
NOTES:  
Accurate stabilisation may not be possible if hand shake is excessive, or  
under the following conditions:  
When shooting subjects with vertical or horizontal stripes.  
When shooting dark or dim subjects.  
OFF  
When shooting subjects with excessive backlighting.  
When shooting scenes with movement in various directions.  
When shooting scenes with low-contrast backgrounds.  
Switch off this mode when recording with the camcorder on a tripod.  
The “  
indicator blinks or goes out if the Stabiliser cannot be used.  
TELE  
MACRO  
Usually the distance to a subject where the lens is in focus depends on the  
zoom magnification. Unless there is a distance more than 1m to the subject,  
the lens is out of focus at the maximum telephoto setting. When set to ON,  
you can shoot a subject as large as possible at a distance of approx. 60 cm.  
Depending on the zoom position, the lens may go out of focus.  
ON  
OFF  
WIDE  
MODE  
OFF  
Records with no change in the screen ratio. For playback on a TV with a  
normal screen ratio.  
CINEMA  
Inserts black bands at the top and bottom of the screen. During playback on  
wide-screen TVs, the black bands at the top and bottom of the screen are cut  
and the screen ratio becomes 16:9.  
appears. When using this mode, refer  
to your wide-screen TVs instruction manual. During playback/recording on  
4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and  
bottom of the screen and the image appears like a letterboxed 16:9 movie.  
SQUEEZE For playback on TVs with an aspect ratio of 16:9. Naturally expands the image  
to fit the screen without distortion.  
appears. When using this mode, refer to  
your wide-screen TVs instruction manual. During playback/recording on 4:3  
TVs/LCD monitor/viewfinder, the image is elongated vertically.  
: Factory-preset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN23  
ON  
Helps cut down on noise created by wind. “  
sound will change. This is normal.  
appears. The quality of the  
WIND  
CUT  
OFF  
Disengages the function which cuts down on noise created by wind.  
CANCEL  
Does not reset all settings to the factory-preset.  
CAM  
RESET  
EXECUTE Resets all settings to the factory-preset.  
ON  
SCREEN  
LCD  
Keeps the camcorders display (except the date, time and time code) from  
appearing on the connected TV screen.  
LCD/TV  
SIMPLE  
Makes the camcorders display appear on screen when the camcorder is  
connected to a TV.  
Keeps the indications (except the tape running indicator, warnings, date, time,  
time code, etc.) from appearing in the camcorder. Also keeps the camcorders  
display (except the date, time and time code) from appearing on the con-  
nected TV screen.  
DATE/  
TIME  
ON  
The date/time is always displayed.  
The date/time does not appear.  
OFF  
ON  
Time code is displayed on the camcorder and on the connected TV. Frame  
numbers are not displayed during recording.  
TIME  
CODE  
Time code is not displayed.  
OFF  
CLOCK  
ADJ.  
Allows you to set the current date and time (pg. 9).  
: Factory-preset  
NOTES:  
The MANUAL MENUsettings are effective only when the Power Switch is set to “ ”.  
DISPLAY MENUfunctions which are set when the Power Switch is set to “ ” are also applied when the  
Power Switch is set to “  
(pg. 30). CLOCK ADJ.only appears when the Power Switch is set to “ ”.  
The DISPLAY MENUsettings are effective even when the Power Switch is set to “ ”.  
The ON SCREENsetting can also be changed by pressing the DISPLAY Button on the remote control  
(provided) (pg. 33, 36, 44).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
24  
EN  
FADE/WIPE SELECTION (  
,
,
)
,
,
Fade/Wipe Effects  
,
,
,
,
,
and  
These effects let you make pro-style scene  
transitions. Use them to spice up the transition  
from one scene to the next. You can also vary  
transitions from scene to scene.  
Fade or Wipe works when recording is started or when  
you stop recording.  
Set the Power Switch to “ ” while pressing down  
IMPORTANT:  
1
2
3
4
the Lock Button located on the switch.  
Some Fade/Wipe Effects cannot be used with  
certain modes of Programme AE with special  
effects (pg. 26). If an unusable Fade/Wipe  
Effect is selected, its indicator blinks or goes  
out.  
Press MENU/BRIGHT. The Menu Screen appears.  
Rotate MENU/BRIGHT to select “ ”, then press it.  
Rotate MENU/BRIGHT to select the desired function,  
then press it. Selection is complete.  
The FADER/WIPE Menu disappears and the effect is  
reserved. The indicator representing the selected  
effect appears.  
MENU/BRIGHT Wheel  
Press the Recording Start/Stop Button to activate the  
Fade-in/out or Wipe-in/out.  
5
PICTURE WIPE OR DISSOLVE SELECTION  
and  
The Picture Wipe or Dissolve works when recording is  
started.  
(
,
,
,
,
,
)
Recording  
Power Switch  
Start/Stop Button  
Follow steps 1 through 4 above.  
1
2
To Deactivate The Selected Effect . . .  
.... select OFFin step 4.  
If you select Picture Wipe/Dissolve during  
recording . . .  
.... press the Recording Start/Stop Button when one  
scene is finished. The point at which the scene  
ended is stored in memory.  
NOTES:  
You can extend the length of a Fade or Wipe  
by pressing and holding the Recording Start/  
Stop Button.  
If the power is turned off after a scene is  
finished recording, the stored point is erased,  
disabling the Picture Wipe/Dissolve combina-  
tion. When this happens, the Picture Wipe/  
Dissolve indicator blinks. Also note that  
power shuts off automatically if 5 minutes  
elapse in the Record-Standby mode.  
The sound at the end of the last recorded  
scene is not stored.  
If you select Picture Wipe/Dissolve during Record-  
Standby mode . . .  
.... press the Recording Start/Stop Button to start  
recording and press it again when one scene is  
finished. The point at which the scene ended is  
stored in memory.  
If you select Picture Wipe/Dissolve during Record-  
Standby mode after performing a Picture Wipe/  
Dissolve . . .  
.... the point at which the scene ended is already  
stored in memory.  
If you start recording a new scene within 5 minutes of  
the end of the previous recording (without having  
turned the camcorders power off), the previous scene  
wipes out, revealing the new scene.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN25  
Fader And Wipe Menu  
Menu  
Effect  
Fade in or out with a white screen.  
FADER WHITE  
FADER BLACK  
FADER MOSAIC  
FADER B.W  
Fade in or out with a black screen.  
Fade in or out with a full-screen mosaic effect.  
Fade in to a colour screen from a black and white screen, or fade out  
from colour to black and white.  
Wipe in on a black screen from the upper right to the lower left  
corner, or wipe out from lower left to upper right, leaving a black  
screen.  
WIPE CORNER  
The scene starts in the centre of a black screen and wipes in toward  
the corners, or comes in from the corners, gradually wiping out to the  
centre.  
WIPE WINDOW  
WIPE SLIDE  
Wipe in from right to left, or wipe out from left to right.  
Wipe in as the two halves of a black screen open to the left and right,  
revealing the scene, or wipe out and the black screen reappears from  
left and right to cover the scene.  
WIPE DOOR  
The scene wipes in from the bottom to the top of a black screen, or  
wipes out from top to bottom, leaving a black screen.  
WIPE SCROLL  
WIPE SHUTTER  
Wipe in from the centre of a black screen toward the top and bottom,  
or wipe out from the top and bottom toward the centre leaving a  
black screen.  
The new scene gradually appears as the old one gradually disappears.  
DISSOLVE  
The new scene wipes in over the previous one from the upper right  
corner to the lower left corner.  
WIPE CORNER  
WIPE WINDOW  
The next scene gradually wipes in from the centre of the screen  
toward the corners, covering the previous scene.  
The next scene gradually wipes in over the previous one from right to  
left.  
WIPE SLIDE  
The previous scene wipes out from the centre to the right and left, like  
a door being pushed open to reveal the next scene.  
WIPE DOOR  
WIPE SCROLL  
WIPE SHUTTER  
The new scene wipes in over the last one from the bottom of the  
screen to the top.  
The new scene wipes in over the previous one from the centre toward  
the top and bottom of the screen.  
When this function is activated, the camcorder randomly selects the  
effect used in scene transition (from  
,
,
,
,
,
,
RANDOM  
,
,
, and ). The Picture Wipe/Dissolve function is not  
available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
Programme AE With Special Effects  
26  
EN  
IMPORTANT:  
Some modes of Programme AE with special  
effects cannot be used with certain Fade/Wipe  
Effects (pg. 25). If an unusable mode is  
selected, its indicator blinks or goes out.  
Set the Power Switch to “ ” while pressing down  
1
2
3
4
the Lock Button located on the switch.  
Press MENU/BRIGHT. The Menu Screen appears.  
MENU/  
BRIGHT Wheel  
Rotate MENU/BRIGHT to select “ ”, then press it.  
Power Switch  
Rotate MENU/BRIGHT to select the desired mode,  
then press it. Selection is complete.  
The P.AE/EFFECT Menu disappears and the selected  
mode is activated. The selected mode indicator  
appears.  
Display  
P
.
AE  
/
EFFECT  
To Deactivate The Selected Mode . . .  
Menu Screen  
.... select OFFin step 4.  
SLO  
SLO  
V I DEO ECHO  
OFF  
SHUTTER  
SHUTTER  
SHUTTER  
W
W
4x  
10x  
NOTE:  
4
Programme AE with special effects can be changed during  
recording or during Record-Standby.  
1/50  
1/100  
1/250  
1/50  
1/100  
1/250  
TWILIGHT  
SLOW (Slow Shutter)  
Makes evening scenes look more natural.  
White Balance (pg. 28) is initially set to  
, but can be changed to your desired  
setting. When Twilight is chosen, the  
camcorder automatically adjusts the focus  
from approx. 10 m to infinity. From less than  
10 m, adjust the focus manually.  
Lights dark subjects or areas even brighter than they  
would be under good natural lighting. Use SLOW”  
only in dark areas.  
SLOW 4X  
The Shutter Speed is set to 1/12.5th of a second to  
quadruple the sensitivity.  
SLOW 10X  
SEPIA  
The Shutter Speed is set to 1/5th of a second to provide  
10 times the sensitivity.  
Recorded scenes have a brownish tint like  
old photos. Combine this with the Cinema  
mode for a classic look.  
NOTES:  
When using SLOW, the image takes on a strobe-like  
effect.  
MONOTONE  
Like classic black and white films, your  
footage is shot in B/W. Used together with  
the Cinema mode, it enhances the classic  
filmeffect.  
If the manual focus indicator blinks when SLOWis  
used, adjust focus manually and use a tripod.  
SHUTTER (Variable Shutter Speed)  
CLASSIC FILM  
Gives recorded scenes a strobe effect.  
1/50 The shutter speed is fixed at 1/50th of a second.  
Black bands that usually appear when shooting a TV  
screen become narrower.  
STROBE  
1/100 The shutter speed is fixed at 1/100th of a  
second. The flickering that occurs when shooting under  
a fluorescent light or mercury-vapour lamp is reduced.  
1/250, 1/500 These settings allow fast-moving images  
to be captured one frame at a time, for vivid, stable  
slow-motion playback. The faster the shutter speed, the  
darker the picture becomes. Use the shutter function  
under good lighting conditions.  
Your recording looks like a series of  
consecutive snapshots.  
VIDEO ECHO  
Adds a ghostto the subject, giving your  
recording a fantasyfeeling. Zoom  
magnification of over 10X is not available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN27  
Use this function in the following situations:  
When shooting a moving subject.  
Exposure Control  
Iris Lock  
Manual exposure adjustment is recommended in the  
following situations:  
When the distance to the subject changes (so its  
size in the LCD monitor or the viewfinder changes),  
such as when the subject is backing away.  
When shooting on a reflective natural background  
such as at the beach or when skiing.  
When shooting objects under a spotlight.  
When zooming.  
When shooting using reverse lighting or when the  
background is too bright.  
When shooting on a reflective natural background  
such as at the beach or when skiing.  
When the background is overly dark or the subject  
light.  
Set the Power Switch to “ ” while pressing  
When the subject is close, keep the iris locked. Even  
when the subject moves away from you, the image  
will not darken or brighten.  
Before the following steps, perform steps 1 through  
4 of Exposure Control.  
1
2
3
4
down the Lock Button located on the switch.  
Press MENU/BRIGHT. The Menu Screen  
appears.  
Rotate MENU/BRIGHT to select “ ”, then  
press it.  
Adjust zoom so that the subject fills the LCD  
5
monitor or the viewfinder, then press and hold  
MENU/BRIGHT for over 2 seconds. The  
exposure control indicator and “ ” appear.  
Rotate MENU/BRIGHT to select MANUAL,  
then press it. The Menu Screen disappears.  
EXP.and the highlight bar on the exposure  
control indicator are displayed.  
Press MENU/BRIGHT. “ ” changes to “  
and the iris is locked. EXP.goes out.  
Rotate MENU/BRIGHT towards +to brighten  
the image, or towards to darken the image.  
(maximum 6)  
5
6
MENU/BRIGHT Wheel  
Power Switch  
EXP.  
Press MENU/BRIGHT. Exposure adjustment is  
complete. The indication EXP.and the  
highlight bar on the exposure control indicator  
go out.  
BACKLIGHT Button  
0
To Return To Automatic Exposure Control . . .  
.... select AUTOin step 4. Or, set the Power  
Switch to “ ”.  
NOTE:  
Iris lock indicator  
To Brighten The Subject Quickly . . .  
.... press BACKLIGHT.  
is displayed and the  
subject is brightened. If pressed again,  
disappears and the brightness returns to the  
previous level.  
To Return To Automatic Iris Control . . .  
.... rotate MENU/BRIGHT to display AUTOthen  
press it in step 4. The exposure control indicator  
and “ ” disappear. Or, set the Power Switch to  
+3 exposure has the same effect as the  
BACKLIGHT Button.  
Using BACKLIGHT may cause the light around the  
subject to become too bright and the subject to  
become white.  
Backlight compensation is also available when the  
Power Switch is set to “ ”.  
Pressing the BACKLIGHT button has no effect  
.  
To Lock The Exposure Control And The Iris . . .  
.... after step 4, adjust the exposure rotating MENU/  
BRIGHT. Then lock the iris in step 5. For  
automatic locking, rotate MENU/BRIGHT to  
select AUTO, then press it in step 4. The iris  
becomes automatic after about 2 seconds.  
when the exposure  
is set to MANUALand  
the Power Switch is set to “ ”.  
Iris  
Like the pupil of the human eye, it contracts in well-  
lit environments to keep too much light from  
entering, and dilates in dim environments to allow in  
more light.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
28  
EN  
White Balance Adjustment  
Manual White Balance Operation  
A term that refers to the correctness of colour  
reproduction under various lighting. If the white  
Perform Manual White Balance when shooting under  
various types of lighting.  
balance is correct, all other colours will be accu-  
rately reproduced.  
The white balance is usually adjusted automatically.  
However, more advanced camcorder operators  
control this function manually to achieve a more  
professional colour/tint reproduction.  
Follow steps 1 through 4 of the white balance  
adjustment, and select MAN..  
1
2
Hold a sheet of plain white paper in front of the  
subject. Adjust zoom or position yourself so that  
the white paper fills the screen.  
Set the Power Switch to “ ” while pressing  
Press MENU/BRIGHT until  
When the setting is completed,  
blinking.  
begins blinking.  
stops  
1
2
3
down the Lock Button located on the switch.  
3
4
Press MENU/BRIGHT. The Menu Screen  
appears.  
Press MENU/BRIGHT. Only the Manual White  
Balance indicator  
is displayed.  
Rotate MENU/BRIGHT to select “ ”, then  
press it. The Menu Screen disappears and  
W.BALand the currently selected mode are  
displayed.  
MENU/BRIGHT Wheel  
Rotate MENU/BRIGHT to select the desired  
mode.  
4
AUTO” – White balance is adjusted automati-  
cally (factory preset).  
MAN.” – White balance is set manually.  
” – Outdoors on a sunny day.  
” – Outdoors on a cloudy day.  
” – A video light or similar type of lighting  
White paper  
is used.  
Press MENU/BRIGHT. Selection is complete.  
Power Switch  
5
To Return To Automatic White Balance . . .  
.... select AUTOin step 4. Or, set the Power  
Switch to “ ”.  
To Change The Tint For Recording . . .  
.... in step 2, substitute coloured paper for white.  
The white balance is adjusted based on the  
colour, changing the tint. Red paper = deeper  
green; blue paper = orange; yellow paper =  
deeper purple.  
NOTE:  
White balance cannot be used when Sepia or  
Monotone (pg. 26) is activated.  
NOTES:  
In step 2, it may be difficult to focus on the white  
paper. In such a case, adjust focus manually  
(pg. 19).  
A subject can be shot under various types of  
lighting conditions indoors (natural, flourescent,  
candlelight, etc.). Because the colour temperature  
is different depending on the light source, the  
subject tint will differ depending on the white  
balance settings. Use this function for a more  
natural result.  
Once you adjust white balance manually, the  
setting is retained even if the power is turned off or  
the battery removed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Playback  
EN29  
Play/Pause Button  
Load a tape (pg. 10).  
(4/6)  
1
2
Rewind Button (2  
)
Fast-Forward Button  
Set the Power Switch to “  
” while pressing down  
the Lock Button located on the switch. To start  
playback, press 4/6.  
(3  
)
Stop Button (5)  
To stop playback, press 5.  
Power Zoom  
Lever (VOL.)  
•Press  
2
to rewind, or  
3
to fast-forward the tape  
during Stop mode.  
To Control The Speaker Volume . . .  
.... slide the Power Zoom Lever (VOL.) towards “+” to turn  
up the volume, or towards “” to turn down the volume.  
NOTES:  
If Stop mode continues for 5 minutes when power is  
supplied from a battery, the camcorder shuts off automati-  
cally. To turn on again, set the Power Switch to OFF, then  
to “  
.  
Speaker  
The playback picture can be viewed in the LCD monitor,  
viewfinder or on a connected TV (pg. 32).  
You can also view the playback picture on the LCD monitor  
with it flipped over and pushed against the camera body.  
LCD monitor/viewfinder indications:  
When power is supplied from a battery: the “  
battery pack remaining power indicator is displayed.  
When power is supplied through the DC cord: “  
does not appear.  
Lock Button  
During Stop mode, none of the indications are displayed.  
When a cable is connected to the AV connector, the sound  
is not heard from the speaker.  
Power Switch  
Still Playback: Pauses during playback.  
1) Press 4/6 during playback.  
2) To resume normal playback, press 4/6 again.  
If still playback continues for more than about 3 minutes, the camcorders Stop mode is automatically  
engaged. After 5 minutes in the Stop mode, the camcorders power is automatically turned off.  
When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still  
image.  
Shuttle Search: Allows high-speed search in either direction.  
1) Press  
2) To resume normal playback, press 4/6.  
During playback, press and hold  
3
for forward or  
2
for reverse search during playback.  
2
or 3. The search continues as long as you hold the button.  
Once you release it, normal playback resumes.  
A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.  
Frame-By-Frame Playback: Allows frame-by-frame search.  
1) Engage Still Playback.  
2) Rotate MENU/BRIGHT towards +for forward Frame-By-Frame Playback, or towards for reverse  
Frame-By-Frame Playback during Still Playback.  
To resume normal playback, press 4/6.  
You can also use the provided remote control for Frame-By-Frame Playback (pg. 41).  
Playback Zoom and Playback Special Effects  
Available only with the remote control (provided) (pg. 41, 42).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Advanced Features  
30  
EN  
Power Switch  
Lock Button  
Using Menus For Detailed Adjustment  
The following procedure applies to all except Synchro  
Comp (pg. 47, 48).  
Set the Power Switch to “  
while pressing down  
1
2
3
the Lock Button located on the switch.  
Press MENU/BRIGHT. The Menu Screen appears.  
MENU/BRIGHT Wheel  
Rotate MENU/BRIGHT to select the desired function  
icon, and press it. The selected function menu  
appears.  
Rotate MENU/BRIGHT to select the desired function,  
4
5
6
and press it to display the Sub Menu.  
Rotate MENU/BRIGHT to select the desired  
parameter and press it. Selection is complete.  
Rotate MENU/BRIGHT to select 1RETURNand  
press it twice to close the Menu Screen.  
Recording Start/Stop Button  
Display  
V I DEO MENU  
1RETURN  
SOUND MODE  
12BIT MODE  
SYNCHRO  
pg. 31.  
pg. 31.  
pg. 48.  
Menu Screen  
SOUND  
12B I T  
MODE  
STEREO  
M
ODE  
S
S
OUND  
OUND  
L
SYNCHRO  
R
REC MODE  
REC MODE  
Allows you to set the  
video recording mode (SP  
or LP) depending on your  
preference (pg. 11).  
It is recommended you  
use REC MODEin the  
VIDEO MENUwhen  
using this camcorder as a  
recorder during digital  
dubbing (pg. 38).  
D I SPLAY  
1RETURN  
M
ENU  
ON  
ON SCREEN  
DATE / T I  
ME  
T I ME CODE  
OFF  
ON SCREEN*  
Makes the camcorders  
indications appear/  
disappear from the  
* Each setting is linked with DISPLAY MENU,  
which appears when the Power Switch is set  
to “ ” (pg. 23). The parameters are the  
same as in the description on pg. 23.  
connected TV screen.  
DATE/TIME*  
TIME CODE*  
Makes the date/time  
appear/disappear on the  
camcorder.  
NOTES:  
It is also possible to change the ON SCREEN  
settings by pressing DISPLAY on the remote  
control (provided).  
Makes the time code  
appear/disappear on the  
camcorder.  
REC MODEcan be set when the Power  
Switch is set to “  
21).  
or “ ” (pg. 11,  
If ON SCREENis set to SIMPLE, it keeps  
the camcorders display (except the date,  
time and time code) from appearing on the  
connected TV. It also makes the playback  
sound mode and tape speed disappear on the  
camcorder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN31  
Playback Sound  
During playback, the camcorder detects the sound mode in which the recording was made, and plays the  
sound back. Select the type of sound to accompany your playback picture. According to the menu access  
explanation on pg. 30, select SOUND MODEor 12BIT MODEfrom the Menu Screen and set it to the  
desired parameter.  
STEREO  
Sound is output on both Land Rchannels in stereo.  
Sound from the Lchannel is output in stereo.  
SOUND MODE  
12BIT MODE  
SOUND L  
SOUND R  
SOUND 1  
SOUND 2  
MIX  
Sound from the Rchannel is output in stereo.  
Original sound is output on both Land Rchannels in stereo.  
Dubbed sound is output on both Land Rchannels in stereo.  
Original and dubbed sounds are combined and output in stereo on  
both Land Rchannels in stereo.  
: Factory-preset  
NOTES:  
The SOUND MODEsetting is available for both 12-bit and 16-bit sound. (In previous modelsfunctions,  
12-bitis called 32 kHzand 16-bitis called 48 kHz.)  
The camcorder cannot detect the sound mode in which the recording was made during fast-forward or  
rewind. During playback the sound mode is displayed in the upper left corner.  
Display  
ON SCREEN setting:  
For playback sound, tape  
speed and tape running.  
DATE/TIME setting:  
For date/time.  
TIME CODE setting:  
For time code.  
12B I T  
/
SOUND  
1
SP  
4
25. 12. 00  
:
:
:
17 30  
TC 12 34 24  
Frames*  
Seconds  
Minutes  
*25 frames = 1 second  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Connections  
32  
EN  
These are some basic types of connections. When making the connections, refer also to your VCR and TV  
instruction manuals.  
A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input (RCA type) connectors  
To TV or VCR  
Audio/Video cable  
[mini-plug to RCA plug]  
(provided)  
Yellow:  
Not connected  
TV  
White to  
AUDIO L IN  
Core filter  
To AV  
VCR  
Red to  
AUDIO R IN  
S-Video cable  
(optional)  
To S  
To S-VIDEO IN  
Core  
filter  
Connector cover*  
*When connecting the cables, open this cover.  
B. Connection to a TV or VCR equipped only with A/V input connectors  
To TV or VCR  
Yellow to VIDEO IN  
To AV  
TV  
Core filter  
Audio/Video cable  
[mini-plug to RCA plug]  
(provided)  
White to AUDIO L IN  
VCR  
Connector cover*  
Red to AUDIO R IN  
*When connecting the cables, open this cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN33  
NOTES:  
Make sure all units are turned off.  
It is recommended to use the AC Power Adapter/  
Charger as the power supply instead of the battery  
pack (pg. 7).  
1
2
Connect the camcorder to a TV or VCR as  
shown in the illustration (pg. 32).  
If using a VCR . . . go to step 3.  
If not . . . go to step 4.  
When connecting the cables, make sure to  
connect the ends with a core filter to the  
camcorder. The core filter reduces interference.  
To monitor the picture and sound from the  
camcorder without inserting a tape, set the  
camcorders Power Switch to “ ” or “ ”, then  
set your TV to the appropriate input mode.  
Make sure you adjust the TV sound volume to its  
minimum level to avoid a sudden burst of sound  
when the camcorder is turned on.  
If you have a TV or speakers that are not specially  
shielded, do not place the speakers adjacent to the  
TV as interference will occur in the camcorder  
playback picture.  
Connect the VCR output to the TV input,  
referring to your VCRs instruction manual.  
3
4
5
Turn on the camcorder, the VCR and the TV.  
Set the VCR to its AUX input mode, and set the  
TV to its VIDEO mode.  
To choose whether or not the following displays  
appear on the connected TV . . .  
Date/Time  
.... set DATE/TIMEto ONor OFFin the  
Menu Screen (pg. 30).  
Time Code  
.... set TIME CODEto ONor OFFin the  
Menu Screen (pg. 30).  
Playback Sound Mode, Tape Speed And Tape  
Running Displays  
.... set ON SCREENto LCDor SIMPLEin the  
Menu Screen (pg. 30). Or, press DISPLAY  
on the remote control (provided).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Advanced Connections  
34  
EN  
Connection To A Personal Computer  
This camcorder can transfer still images to a PC by using  
the image transfer software (optional software such as the  
HS-V14KIT) when connected as shown in the illustration.  
It is also possible to transfer still images to a PC with a DV  
connector-equipped capture board installed.  
Make sure the camcorder and PC are turned off.  
1
2
3
Power Switch  
Connector  
cover**  
Connect the camcorder to your PC using the  
appropriate cable as shown in the illustration.  
Turn the camcorders Power Switch to “  
pressing down the Lock Button located on the switch  
and turn on the PC.  
while  
To DV  
IN/OUT  
To PC  
(DIGITAL  
PHOTO)  
NOTES:  
It is recommended to use the AC Power Adapter/  
Charger as the power supply instead of the battery pack  
(pg. 7).  
Core filter  
Never connect the PC connection cable and the DV  
cable simultaneously to the camcorder. Connect only  
the cable you wish to use to the camcorder.  
The date/time information cannot be captured into the  
PC.  
Refer to the instruction manuals of the Software.  
Also refer to the manufacturers instruction manual for  
the DV connector-equipped capture board.  
PC  
connection  
cable  
DV cable*  
(optional)  
To DV  
connector  
To  
RS-232C  
PC with DV  
connector-equipped  
capture board  
PC  
* Use the DV cable provided with the capture board.  
** When connecting the cable, open this cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN35  
Connection To A Video Unit Equipped With  
A DV Connector  
Connection to the GV-DT3 Digital Printer (optional) allows  
you to print out images or transfer them to a PC. It is also  
possible to copy recorded scenes from the camcorder onto  
another video unit equipped with a DV connector. This  
function is called Digital Dubbing (pg. 37), which  
offers virtually no image or sound deterioration.  
Power Switch  
Connector  
cover*  
Make sure all units are turned off.  
1
2
3
Make connections to the device you want to connect  
to using a DV cable, as shown in the illustration.  
To DV IN/OUT  
If necessary, connect the PC connection cable  
(optional) to the printers PC connector and the PCs  
RS-232C connector.  
Core filter  
Turn the camcorders Power Switch to “  
pressing down the Lock Button located on the switch  
and turn on the other units.  
while  
4
DV cable  
(optional)  
NOTES:  
It is recommended to use the AC Power Adapter/  
Charger as the power supply instead of the battery pack  
(pg. 7).  
To DV IN  
connector  
To DV  
connector  
For Digital Dubbing, this camcorder can be connected  
only to one device at a time. This can be used as both a  
player and a recorder (pg. 37, 38).  
If Still Playback, Slow-Motion Playback, Fast-Forward or  
Rewind is attempted with the camcorder connected to a  
video unit via the DV connector, the image will take on  
an effect similar to a coloured mosaic pattern or it will  
become black.  
Video unit equipped with  
a DV input connector  
To PC  
connector  
Also refer to the instruction manuals of the connected  
units.  
When using a DV cable, be sure to use the optional JVC  
VC-VDV204U DV cable.  
Core filter  
Digital Printer  
PC  
connection  
cable  
(optional)  
To RS-232C  
PC  
* When connecting the cable, open this cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUBBING  
36  
EN  
Dubbing To A VCR  
Following the illustration, connect the camcorder and  
the VCR. Also refer to pg. 32 and 33.  
1
2
Set the camcorders Power Switch to “  
while  
pressing down the Lock Button located on the switch,  
turn on the VCRs power, and insert the appropriate  
cassettes in the camcorder and the VCR.  
Power Switch  
Engage the VCRs AUX and Record-Pause modes.  
3
4
To AV  
Engage the camcorders Play mode to find a spot just  
before the edit-in point. Once it is reached, press  
4/6 on the camcorder.  
Core filter  
Press 4/6 on the camcorder and engage the VCRs  
5
6
7
Record mode.  
Connector  
cover**  
To S  
Engage the VCRs Record-Pause mode and press  
4/6 on the camcorder.  
Audio/Video cable  
[mini-plug to RCA  
plug] (provided)  
Repeat steps 4 through 6 for additional editing, then  
stop the VCR and camcorder when finished.  
Core filter  
NOTES:  
S-Video cable  
(optional)  
Before you start dubbing, make sure that the indications  
do not appear on the connected TV. If they do, they are  
being recorded onto the new tape.  
To choose whether or not the following displays appear  
on the connected TV . . .  
To AUDIO,  
VIDEO* and  
S-VIDEO IN  
connectors  
Date/Time  
.... set DATE/TIMEto ONor OFFin the Menu  
Screen (pg. 30).  
Time Code  
.... set TIME CODEto ONor OFFin the Menu  
Screen (pg. 30).  
Playback Sound Mode, Tape Speed And Tape Running  
Displays  
VCR (Recording deck)  
.... set ON SCREENto LCDor SIMPLEin the  
Menu Screen (pg. 30). Or, press DISPLAY on the  
remote control.  
When connecting the cables, make sure to connect the  
ends with a core filter to the camcorder. The core filter  
reduces interference.  
TV  
It is recommended to use the AC Power Adapter/  
Charger as the power supply instead of the battery pack  
(pg. 7).  
You can use Playback Zoom (pg. 41) or Playback  
Special Effects (pg. 42) in step 5.  
* Connect when an S-Video cable is not used.  
** When connecting the cables, open this cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN37  
Dubbing To A Video Unit Equipped With A  
DV Connector (Digital Dubbing)  
It is also possible to copy recorded scenes from the  
camcorder onto another video unit equipped with a DV  
connector. Since a digital signal is sent, there is little if any  
image or sound deterioration.  
[To use this camcorder as a player]  
Power Switch  
Make sure all units are turned off. Connect the  
1
2
camcorder to a video unit equipped with a DV input  
connector using a DV cable as shown in the  
illustration.  
To DV OUT  
Connector cover*  
Set the camcorders Power Switch to “  
while  
pressing down the Lock Button located on the switch,  
turn on the video units power, and insert the  
appropriate cassettes in the camcorder and the video  
unit.  
Core filter  
Engage the video units Record-Pause mode.  
DV cable  
(optional)  
3
4
Engage the camcorders Play mode to find a spot just  
before the edit-in point. Once it is reached, press  
4/6 on the camcorder.  
To DV IN  
Video unit equipped  
with DV connector  
Press 4/6 on the camcorder and engage the video  
units Record mode.  
5
6
7
Engage the video units Record-Pause mode and press  
4/6 on the camcorder.  
Repeat steps 4 through 6 for additional editing, then  
stop the video unit and camcorder when finished.  
*When connecting the cable, open this cover.  
NOTES:  
It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack  
(pg. 7).  
If the remote control is used when both the player and recorder are JVC video units, both units will perform  
the same operation. To prevent this from happening, press the buttons on both units.  
For Digital Dubbing, this camcorder can be connected only to one device at a time.  
If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so  
that an unusual image is not dubbed.  
Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this  
occurs, turn off the power and make connections again.  
If Playback Zoom(pg. 41), Playback Special Effects(pg. 42) or Snapshotis attempted during  
playback, only the original playback image recorded on the tape is output from the DV OUT connector.  
When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUBBING (cont.)  
38  
EN  
Dubbing From A Video Unit Equipped With  
A DV Connector (Digital Dubbing)  
[To use this camcorder as a recorder]  
Make sure all units are turned off. Connect the  
1
camcorder to a video unit equipped with a DV output  
connector using a DV cable as shown in the  
illustration.  
Power Switch  
Set REC MODEto SPor LPin the Menu Screen  
depending on your preference (pg. 11 or 30).  
2
3
Set this camcorders Power Switch to “  
while  
To DV IN  
Connector cover*  
pressing down the Lock Button located on the switch.  
Turn on the video units power and insert the  
appropriate cassettes in the camcorder and the video  
unit.  
Core filter  
Press the Recording Start/Stop Button on the  
camcorder to engage the Record-Pause mode.  
DV. INappears on the screen.  
4
5
6
DV cable  
(optional)  
Engage the video units Play mode, then engage the  
Still Playback mode when you have found a spot just  
before the edit-in point.  
To DV OUT  
Video unit equipped  
with DV output  
connector  
Press the Recording Start/Stop Button on the  
DV. IN  
camcorder to engage the Record mode. “  
appears on the screen. Engage the video units Play  
mode.  
To stop dubbing, press the Recording Star/Stop Button  
on the camcorder so that DV. INreappears, then  
engage the video units Stop mode.  
7
8
Repeat steps 5 through 7 for additional editing.  
*When connecting the cable, open this cover.  
NOTES:  
It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack  
(pg. 7).  
If the remote control is used when both the player and recorder are JVC video units, both units will perform  
the same operation. To prevent this from happening, press the buttons on both units.  
For Digital Dubbing, this camcorder can be connected only to one device at a time.  
If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so  
that an unusual image is not dubbed.  
Even though the DV cable is connected correctly, sometimes the image may not appear in step 5. If this  
occurs, turn off the power and make connections again.  
Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current  
SOUND MODEsetting (pg. 21).  
During Digital Dubbing, no signals are output from the video or audio connectors.  
When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT  
EN39  
The Full-Function Remote Control Unit can operate this  
camcorder from a distance as well as the basic operations  
(Playback, Stop, Pause, Fast-Forward and Rewind) of your  
VCR. It also makes additional playback functions possible.  
1
3
Tab  
Installing The Batteries  
The remote control uses two AAA (R03)size batteries.  
See General Battery Precautions(pg. 63).  
Remove the battery compartment cover while  
1
2
3
pushing up the tab as illustrated.  
Insert two AAA (R03)size batteries in the correct  
direction.  
Re-attach the battery compartment cover.  
+
2
+
When using the remote control, be sure to point it at the  
remote sensor. The illustration shows the approximate  
transmitted beam effective area for indoor use.  
The transmitted beam may not be effective or may  
cause incorrect operation outdoors or when the remote  
sensor is directly exposed to sunlight or powerful  
lighting.  
Remote sensor  
Transmitted beam  
effective area  
5m  
30°  
30°  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (cont.)  
40  
EN  
1
0
2
4
!
3
5
@
$
^
*
#
%
&
(
6
8
7
9
)
Functions  
With the camcorders Power Switch  
set to the camera position (“ ” or  
With the camcorders Power Switch  
set to “ ”.  
Buttons  
).  
1 Infrared beam transmitting window  
2 Zoom (T/W) Buttons  
3 DISPLAY Button  
Transmits the beam signal.  
Zoom in/out (pg. 16)  
Zoom in/out (pg. 41)  
pg. 33, 36, 44  
pg. 41, 43  
4 SHIFT Button  
5 SLOW Rewind/Forward Buttons  
pg. 41  
pg. 41  
Left/Right Buttons  
6 REW Button  
Rewind, Reverse Shuttle Search  
(pg. 29)  
7 FADE/WIPE Button  
8 EFFECT ON/OFF Button  
9 EFFECT Button  
pg. 45  
pg. 42  
pg. 42  
pg. 44  
0 PAUSE IN Connector  
! START/STOP Button  
@ MBR SET Button  
Functions the same as the Recording Start/Stop Button on the camcorder.  
pg. 43  
Functions the same as SNAPSHOT on the camcorder.  
# SNAPSHOT Button  
$ Up Button  
pg. 41  
INSERT Button*  
% Down Button  
pg. 41  
pg. 49  
A. DUB Button  
^ PLAY Button  
& FF Button  
Playback start (pg. 29)  
Forward, Forward Shuttle Search  
(pg. 29)  
* STOP Button  
Stop (pg. 29)  
Pause (pg. 41)  
pg. 43 48  
( PAUSE Button  
) R.A.EDIT Buttons  
*This function is unavailable with this camcorder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN41  
Remote sensor  
FEATURE: Slow-Motion Playback  
PURPOSE:  
To allow slow-speed search in either direction during  
playback.  
OPERATION:  
1) To change from normal to Slow-Motion Playback,  
press PAUSE (6) to engage Still Playback then press  
SLOW (9 or 0) more than approx. 2 seconds. After  
approx. 1 minute in Slow Rewind or approx. 2  
minutes in Slow Forward, normal playback resumes.  
To stop Slow-Motion Playback, press PLAY (4).  
NOTES:  
During Slow-Motion Playback, due to digital image  
processing, the picture may take on a mosaic effect.  
After SLOW (9 or 0) is pressed and held, the still  
image may be displayed for a few seconds,  
followed by a blue screen for a few seconds. This is  
not a malfunction.  
Zoom Buttons  
SHIFT  
Left or SLOW  
Rewind Button  
Up Button  
Down  
Button  
There may be a small margin between the slow-  
motion playback start point you chose and the  
actual start point for Slow-Motion Playback.  
During Slow-Motion Playback, there will be  
disturbances in video and the picture may seem  
unstable, especially with steady images. This is not  
a malfunction.  
PLAY  
PAUSE  
STOP  
Right or SLOW  
Forward Button  
During Slow-Motion Playback, press PAUSE (6) to  
pause playback.  
Normal playback  
Press T  
FEATURE: Frame-By-Frame Playback  
PURPOSE:  
To allow frame-by-frame search during playback.  
OPERATION:  
1) To change from normal to Frame-By-Frame Playback,  
press PAUSE (6) to engage Still Playback then press  
To move image,  
press  
(Right)  
SLOW (0) repeatedly for forward or SLOW (9  
)
while keeping  
SHIFT held down.  
repeatedly for reverse. Each time it is pressed, the  
frame is played back.  
FEATURE: Playback Zoom  
PURPOSE:  
To magnify the recorded image up to 10X at any time during playback.  
OPERATION:  
1) Press PLAY (4) to find the scene of interest.  
2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the  
camcorders remote sensor. Pressing T zooms in.  
3) You can move the image on screen around to find a particular portion of the picture. While holding  
down SHIFT, press  
(Left),  
(Right),  
(Up) and  
(Down).  
To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press  
PLAY (4).  
NOTES:  
Zoom can also be used during slow-motion and still playback.  
Due to digital image processing, the quality of the image may suffer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (cont.)  
42  
EN  
PLAYBACK EFFECT  
PLAYBACK  
FEATURE: Playback Special Effects  
EFFECT Select  
Menu  
4OFF  
PURPOSE:  
1
2
3
4
5
CLASS I C F I LM  
M
ONOTONE  
To allow you to add creative effects to the playback  
image.  
SEP I A  
STROBE  
V I DEO ECHO  
OPERATION:  
1) To start playback, press PLAY (4).  
2) Point the remote control at the camcorder's remote  
sensor and press EFFECT. The PLAYBACK EFFECT  
Select Menu appears.  
3) Move the highlight bar to the desired effect by  
pressing EFFECT. The selected function is activated  
and after 2 seconds the menu disappears.  
To deactivate the selected effect, press EFFECT ON/  
OFF on the remote control. Pressing it again re-  
activates the selected effect.  
Remote sensor  
To change the selected effect, repeat from step 2  
above.  
NOTES:  
When some Playback Special Effects are used, the  
Multi-Analyser 4 and Multi-Analyser 9 Snapshot  
modes (pg. 15) are not available.  
The effects that can be used during playback are  
Classic Film, Monotone, Sepia, Strobe and Video  
Echo. The effects work the same in playback as they  
did in recording. Refer to page 26 for more  
information.  
PLAY  
EFFECT  
EFFECT ON/OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN43  
Random Assemble Editing [R.A.Edit]  
Create edited videos easily using your camcorder as  
the source player. You can select up to 8 cutsfor  
automatic editing, in any order you like. R.A.Edit is  
more easily performed when the MBR (Multi-Brand  
Remote) is set to operate with your brand of VCR (see  
VCR CODE LIST), but can also be performed by  
operating the VCR manually.  
VCR (Recording deck)  
Before operation, make sure the batteries are installed  
in the remote control (pg. 39).  
SET REMOTE/VCR CODE  
SHIFT  
MBR SET  
Turn off the power to the VCR and point the  
4
3
1
2
remote towards the VCRs infrared sensor. Then,  
referring to the VCR CODE LIST, press and hold  
MBR SET, and press button (A) and then (B).  
The code is automatically set once you release  
MBR SET, and the VCRs power comes on.  
2
5
1
6
Make sure the VCRs power is on. Then, while  
holding SHIFT, press the button on the remote  
for the desired function. The functions the  
remote can control are PLAY, STOP, PAUSE, FF,  
REW and VCR REC STBY (you do not need to  
press SHIFT for this one).  
7
8 9 `  
VCR CODE LIST  
You are now ready to try Random Assemble  
Editing.  
VCR BRAND  
NAME  
BUTTONS  
(A) (B)  
VCR BRAND  
NAME  
BUTTONS  
(A) (B)  
IMPORTANT  
AKAI  
6
6
7
2ꢀ  
4ꢀ  
7
PHILIPS  
1
9
1
9
9
9
1
3
7
9ꢀ  
5ꢀ  
1ꢀ  
4ꢀ  
1ꢀ  
6ꢀ  
2ꢀ  
3ꢀ  
2ꢀ  
Although the MBR is compatible with JVC VCRs and  
those of many other makers, it may not work with  
yours or may offer limited functions.  
BLAUPUNKT  
FERGUSON  
1
3
NOTES:  
9
9
3
7ꢀ  
8ꢀ  
2
If the VCRs power does not come on in step 1, try  
another code from the VCR CODE LIST.  
Some brands of VCR do not come on automati-  
cally. In this case, turn the power on manually and  
try step 2.  
GRUNDIG  
HITACHI  
1
3
4ꢀ  
4
SANYO  
3
3
6ꢀ  
5
If the remote control is not able to control the VCR,  
use the controls on the VCR.  
When the remote controls batteries run out, the  
VCR brand you have set will be erased.  
In that case, replace the old battery with a new one  
to reset the VCR brand.  
6
6
6ꢀ  
3
SELECO,  
REX  
9
9
1ꢀ  
6
JVC  
A
B
C
9
9
9
1ꢀ  
6ꢀ  
3
SHARP  
1
1
5ꢀ  
`
6
6
3
3
9
9
9
3
5ꢀ  
`ꢀ  
9ꢀ  
1ꢀ  
1ꢀ  
6ꢀ  
7ꢀ  
2
SONY  
MITSUBISHI  
6
6
7ꢀ  
8
NEC  
3
3
7ꢀ  
8
THOMSON,  
TELEFUNKEN,  
SABA,  
PANASONIC  
1
1
1
9
1
3ꢀ  
7ꢀ  
1ꢀ  
4ꢀ  
8
NORDMENDE  
TOSHIBA  
6
6
9ꢀ  
1
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (cont.)  
44  
EN  
MAKE CONNECTIONS  
Also refer to pg. 32 and 33.  
A JVC VCR equipped with a remote pause  
1
connector . . .  
... connect the editing cable to the Remote  
PAUSE connector.  
A JVC VCR not equipped with a remote  
pause connector but equipped with an  
R.A.EDIT connector . . .  
... connect the editing cable to the R.A.EDIT  
connector.  
To  
JLIP/  
EDIT  
To AV  
A VCR other than above . . .  
... connect the editing cable to the remote  
controls PAUSE IN connector.  
Core filter  
Connector  
cover**  
To S  
Insert a recorded tape into the camcorder. Set the  
Audio/Video cable  
[mini-plug to RCA  
plug] (provided)  
Core filter  
2
3
Power Switch to “  
while pressing down the  
Lock Button located on the switch.  
Turn the VCR power on, insert a recordable tape and  
engage the AUX mode (refer to the VCRs instructions).  
S-Video cable  
(optional)  
Editing cable  
(provided)  
NOTES:  
To AUDIO,  
VIDEO* and  
S-VIDEO IN  
connectors  
Before Random Assemble Editing, make sure the  
indications do not appear on the TV monitor. If they do,  
they will be recorded onto the new tape.  
To  
To choose whether or not the following displays appear  
on the connected TV . . .  
Date/Time  
Remote PAUSE  
or R.A.EDIT  
VCR  
.... set DATE/TIMEto ONor OFFin the Menu  
Screen (pg. 30).  
Time Code  
To PAUSE IN  
DISPLAY  
.... set TIME CODEto ONor OFFin the Menu  
Screen (pg. 30).  
Playback Sound Mode, Tape Speed And Tape Running  
Displays  
.... set ON SCREENto LCDor SIMPLEin the  
Menu Screen (pg. 30). Or, press DISPLAY on the  
remote control.  
TV  
When connecting the cables, make sure to connect the  
end with a core filter to the camcorder. The core filter  
reduces interference.  
When editing on a VCR equipped with a DV input  
connector, an optional DV cable can be connected  
instead of the S-Video cable and audio/video cable.  
* Connect when an S-Video cable is not used.  
** When connecting cables, open this cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN45  
Programme  
SELECT SCENES  
Point the remote control at the camcorders remote  
sensor. Press PLAY (4) and then press R.A.EDIT ON/  
OFF on the remote control.  
I N  
OUT  
MODE  
Random Assemble  
Editing Menu  
:
~
~
~
~
~
~
~
~
1– –– ––  
4
5
2
3
4
5
6
7
8
The Random Assemble Editing Menu appears.  
If using a Fade/Wipe at the beginning of the scene,  
press FADE/WIPE on the remote control.  
Cycle through the effects by pressing repeatedly,  
and stop when the one you want is displayed.  
You cannot use a Picture Wipe/Dissolve at the  
beginning of Programme 1.  
:
T I ME CODE – ––  
TOTAL  
:
00 00  
Remote sensor  
At the beginning of the scene, press EDIT IN/OUT on  
the remote control. The Edit-In position appears in  
the Random Assemble Editing Menu.  
6
7
8
At the end of the scene, press EDIT IN/OUT. The  
Edit-Out position appears in the Random Assemble  
Editing Menu.  
If using a Fade/Wipe at the end of the scene, press  
FADE/WIPE.  
Cycle through the effects by pressing repeatedly,  
and stop when the one you want is displayed.  
If you select a Fade/Wipe effect for an Edit-Out  
point, the effect is automatically applied to the  
following Edit-In point.  
You cannot use a Picture Wipe/Dissolve at the end  
of the last scene.  
When you use Fade/Wipe effects, that time is  
included in the total time (this does not apply to  
Picture Wipe/Dissolve).  
1
PLAY  
If using Playback Special Effects, press EFFECT  
(pg. 42).  
FADE/WIPE  
EFFECT  
EDIT IN/OUT  
9
R.A.EDIT  
ON/OFF  
Repeat steps 6 through 9 to register additional scenes.  
10 To change previously registered points, press  
CANCEL on the remote control. The registered  
points disappear, one at a time, from the most  
recently registered point.  
CANCEL  
If you are not using Fade/Wipe or Programme AE  
with special effects, repeat steps 6 and 7 only.  
NOTES:  
When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between  
them.  
If the search time for an in-point exceeds 5 minutes, the recording decks Record-Standby mode will be  
cancelled and editing will not take place.  
If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in  
the edited version.  
Since time codes register time only as accurately as seconds, the time code total time may not match the  
total programme time exactly.  
Turning off the camcorders power erases all registered Edit-In and Edit-Out points.  
If you select Sepia or Monotone mode from Programme AE with special effects, you cannot use the Dissolve  
or Black & White Fader. In this case the Dissolve or Black & White indicator begins blinking. Once the next  
Edit-In point is registered, the effect is turned off. To combine these effects, use Sepia or Monotone during  
recording, then use the Dissolve or Black & White Fader during Random Assemble Editing.  
It is not possible to use Fade/Wipe effects and Programme AE with special effects during Random Assemble  
Editing using a DV cable.  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (cont.)  
46  
EN  
AUTOMATIC EDITING TO VCR  
Rewind the tape in the camcorder to the beginning of  
11 the scene you want to edit and press PAUSE (6).  
Point the remote control towards the VCRs remote  
12 sensor and press VCR REC STBY (q6), or manually  
engage the VCRs Record-Pause mode.  
Press the Recording Start/Stop Button on the  
13 camcorder. Editing proceeds as programmed, right  
Recording Start/Stop Button  
through to the end of the last registered scene.  
Pressing START/STOP on the remote control does  
not start editing.  
When dubbing is complete, the camcorder enters  
the Pause mode, and the VCR enters its Record-  
Pause mode.  
If you do not register an Edit-Out point, the tape will  
be dubbed all the way to the end automatically.  
If you operate the camcorder during automatic  
editing, the VCR will enter its Record-Pause mode  
and automatic editing will stop.  
I N  
:
OUT  
:
M
ODE  
Random Assemble  
Editing Menu  
~
1
2
00 25 02 05  
––  
:
~
:
07 18 08 31– ––  
:
~
:
303 33 05 53  
:
~
:
4
5
09 30 13 15  
:
~
:
15 55 16 20– ––  
:
~
~
~
6– –– ––  
7
8
1
:
:
T I ME CODE 16 30  
TOTAL  
9
39  
Engage the Stop modes for the camcorder and the  
14 VCR.  
To make the R.A.Edit counter display disappear, press  
R.A.EDIT ON/OFF on the remote control.  
Remote Sensor  
NOTES:  
Pressing R.A.EDIT ON/OFF on the remote control clears  
all settings registered during Random Assemble Editing.  
When the editing cable is connected to the remote  
controls Pause In connector during dubbing, make sure  
the remote control is pointed at the VCRs sensor, and  
the path between the two is unobstructed.  
Random Assemble Editing may not function properly  
when using a tape including several duplicated time  
codes (pg. 17).  
STOP  
FADE/WIPE  
PAUSE  
R.A.EDIT  
ON/OFF  
EFFECT  
EDIT IN/OUT  
REW  
CANCEL  
VCR REC  
STBY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN47  
Programme 1  
For More Accurate Editing  
Some VCRs make the transition from Record-Pause to  
Record mode faster than others. Even if you begin editing  
for the camcorder and the VCR at exactly the same time,  
you may lose scenes you wanted, or find that you have  
recorded scenes you did not want. For a cleanly edited  
tape, confirm and adjust the timing of the camcorder  
against your VCR.  
I N  
OUT  
MODE  
Random Assemble  
Editing Menu  
:
~
~
~
~
~
~
~
~
1– –– ––  
2
3
4
5
6
7
8
:
T I ME CODE – ––  
TOTAL  
:
00 00  
DIAGNOSING VCR/CAMCORDER TIMING  
Play back the tape in the camcorder, then point the  
1
2
3
remote control at the camcorders remote sensor and  
press R.A.EDIT ON/OFF.  
The Random Assemble Editing Menu appears.  
TV  
VCR  
(Recording deck)  
Perform Random Assemble Editing on Programme 1  
only. In order to check VCR and camcorder timing,  
select the beginning of a scene transition as your Edit-  
In point.  
Remote sensor  
Play back the dubbed scene.  
If any images from the scene prior to the  
transition you chose for your Edit-In point were  
recorded, that means your VCR moves too quickly  
from Record-Pause to Record mode.  
If the scene you tried to dub starts in progress, the  
VCR is slow to start recording.  
R.A.EDIT  
ON/OFF  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (cont.)  
48  
EN  
ADJUSTMENT OF VCR/CAMCORDER  
MENU/BRIGHT Wheel  
TIMING  
Point the remote control at the camcorders remote  
4
5
6
sensor and press R.A.EDIT ON/OFF to make the  
Random Assemble Editing menu disappear, then  
press MENU/BRIGHT. The Menu Screen appears.  
Rotate MENU/BRIGHT to select “ ” and press it.  
VIDEO MENUappears. Then, rotate it to  
SYNCHROand press it. The value for SYNCHRO”  
is highlighted.  
Based on the diagnostics performed (pg. 47), you  
can now advance the VCRs record timing by rotating  
MENU/BRIGHT towards +. You can also delay the  
VCRs record timing by rotating MENU/BRIGHT  
towards . The adjustment range is from 1.3 to  
+1.3 seconds, in 0.1-second increments.  
Display  
V I DEO MENU  
1RETURN  
SOUND  
12B I T  
M
ODE  
MODE  
+
SYNCHRO  
1
.
0
REC MODE  
Press MENU/BRIGHT to finish the setting.  
Rotate MENU/BRIGHT to select 1RETURNand  
press it twice.  
Now perform Random Assemble Editing beginning  
with step 4 on page 45.  
7
Remote sensor  
NOTES:  
Before performing actual Random Assemble Editing, do  
a few Random Assemble Editing trial runs to check  
whether the value you have input is appropriate or not,  
and make adjustments accordingly.  
Depending on the recorder, there may be situations  
where the timing difference cannot be fully corrected.  
TV  
VCR  
(Recording deck)  
R.A.EDIT  
ON/OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN49  
Display  
Audio Dubbing  
6e  
Audio Dub  
Standby mode  
The audio track can be customized only when recorded in  
the 12-bit mode (pg. 21).  
NOTES:  
Audio Dubbing is not possible on a tape recorded in  
16-bit audio, on a tape recorded in the LP mode or on a  
blank portion of a tape.  
To perform Audio Dubbing while watching on the  
television, make connections (pg. 32).  
Play back the tape to locate the point where editing  
1
2
3
will start, then press PAUSE (6).  
While holding A.DUB (e) on the remote control,  
press PAUSE (6). 6eappears.  
Press PLAY (4), then begin narrating.  
Speak into the microphone.  
To pause dubbing, press PAUSE (6).  
To end Audio Dubbing, press PAUSE (6), then STOP  
(5).  
4
Speaker  
Power Switch  
To hear the dubbed sound during playback . . .  
.... set 12BIT MODEto SOUND 2or MIXin the  
Menu Screen (pg. 30, 31).  
Remote sensor  
NOTES:  
Sound is not heard from the speaker during Audio  
Dubbing.  
When editing onto a tape that was recorded at 12-bit,  
the old and new soundtracks are recorded separately.  
If you dub onto a blank space on the tape, the sound  
may be disrupted. Make sure you only edit recorded  
areas.  
If feedback or howling occurs during TV playback, move  
the camcorders microphone away from the TV, or turn  
down the TVs volume.  
Stereo  
microphone  
If you change from 12-bit to 16-bit in mid-recording and  
then use the tape for Audio Dubbing, it is not effective  
from the point where 16-bit recording began.  
During Audio Dubbing, when the tape moves to scenes  
recorded in the LP mode, scenes recorded in 16-bit  
audio or a blank portion, Audio Dubbing stops  
(pg. 59).  
A.DUB  
PAUSE  
PLAY  
STOP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
50  
EN  
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.  
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,  
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery  
pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes; and then re-connect it and proceed  
as usual from the beginning.  
SYMPTOM  
1. No power is supplied.  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
1. Connect the AC Power  
Adapter/Charger securely  
(pg. 7).  
1. The power is not connected  
properly.  
The battery is dead.  
Replace the dead battery  
with a fully charged one  
(pg. 6, 7).  
2. “SET DATE/TIME!”  
2. The date/time is not set.  
The built-in clock battery  
has run out and the  
2. Set the date/time (pg. 9).  
Consult your nearest JVC  
dealer for replacement.  
appears.  
previously set date/time has  
been erased.  
3. Recording cannot be  
3. The tape’s erase protection  
tab is set to “SAVE”.  
3. Set the tape’s erase  
protection tab to “REC”  
(pg. 10).  
performed.  
The Power Switch is set to  
” or “OFF”.  
Set the Power Switch to  
TAPE END” appears.  
The cassette holder cover is  
open.  
” or “ ” (pg. 13).  
Replace with new cassette  
(pg. 10).  
Close the cassette holder  
cover.  
4. There is no picture.  
4. The camcorder is not getting  
power, or some other  
4. Turn the camcorder’s power  
off and on again (  
pg. 12).  
malfunction exists.  
5. Some functions are not  
available using MENU/  
BRIGHT.  
5. The Power Switch is set to  
5. Set the Power Switch to  
” (pg. 13).  
”.  
6. The focus does not adjust  
6. Focus is set to the Manual  
mode.  
6. Set Focus to the Auto mode  
(pg. 19).  
automatically.  
The recording was done in a  
dark place, or the contrast  
was low.  
Clean the lens and check  
the focus again (pg. 62).  
The lens is dirty or covered  
with condensation.  
7. The cassette will not load  
7. The cassette is in the wrong  
position.  
7. Set it in the right position  
(pg. 10).  
properly.  
The battery’s charge is low.  
Install a fully charged  
battery (pg. 6, 7).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN51  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
8. Snapshot mode cannot be  
8. The Squeeze mode is  
8. Disengage the Squeeze  
mode (pg. 22).  
used.  
selected.  
9. The colour of Snapshot  
9. The light source or the  
subject does not include  
white. Or there are various  
different light sources  
behind the subject.  
9. Find a white subject and  
compose your shot so that it  
also appears in the frame  
(pg. 14).  
looks strange.  
Turn off Sepia and Mono-  
tone (pg. 26).  
The Sepia or Monotone  
mode is activated.  
10. The image taken using  
10. Shooting was performed  
10. Press the BACKLIGHT  
Button (pg. 27).  
Snapshot is too dark.  
under backlit conditions.  
11. Digital Zoom does not  
11. 10X optical zoom is  
selected.  
11. Set ZOOMto 40Xor  
450Xin the Menu Screen  
(pg. 21).  
work.  
P.AE/EFFECTis set to  
VIDEO ECHOin the  
Menu Screen.  
Picture Wipe or Dissolve are  
being used in a scene  
transition.  
Disengage the VIDEO  
ECHOmode (pg. 16,  
26).  
Wait until the Picture Wipe  
or Dissolve effects are  
completed (pg. 16, 24).  
12. Programme AE with  
special effects and Fade/  
Wipe Effects do not work.  
12. The Power Switch is set to  
12. Set the Power Switch to  
.  
(pg. 24, 26).  
13. The Black & White Fader  
13. The Sepia or Monotone  
13. Turn off Sepia and Mono-  
tone (pg. 24, 26).  
does not work.  
mode is activated.  
14. The Dissolve function does  
14. The Sepia, Monotone or  
Slow Shutter mode of  
Programme AE with special  
effects is activated.  
14. Turn off Sepia, Monotone or  
Slow Shutter before adding  
Dissolve to a scene  
not work.  
transition (pg. 24, 26).  
Set WIDE MODEto  
CINEMAor OFFmode  
(pg. 22).  
WIDE MODEis set to  
SQUEEZEin the Menu  
Screen.  
The previously selected  
mode of Programme AE  
with special effects was  
changed after the last  
selected scene for editing  
was registered.  
Make sure you have  
selected the mode of  
Programme AE with special  
effects you want before  
starting editing  
(pg. 24, 26).  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING (cont.)  
52  
EN  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
15. The Picture Wipe and  
Dissolve functions do not  
work.  
15. The last selected editing  
scene is ending.  
15. Select Picture Wipe or  
Dissolve before beginning  
recording. The effects are  
then automatically activated  
(pg. 24).  
At the end of the last  
selected scene for editing,  
the Power Switch was set to  
OFF.  
Do not turn off the  
The power is off.  
camcorders power after  
setting Edit-In and Edit-Out  
points, as they will all be  
erased (pg. 24).  
The camcorder automati-  
cally shuts off after 5 minutes  
have elapsed in the Record-  
Standby mode. Make sure  
you continue operations  
within 5 minutes after  
engaging Record-Standby  
mode (pg. 24).  
16. The picture wipe function  
16 The Slow Shutter mode is  
activated.  
16. Disengage the Slow Shutter  
mode or set WIDE MODE”  
to OFFbefore preparing  
to use the Picture Wipe  
does not work.  
WIDE MODEis not set to  
OFF.  
(pg. 22, 24, 26).  
17. Scene transition does not  
17. When using Picture Wipe/  
Dissolve(pg. 24), there  
is a delay of a fraction of a  
second between the  
17.  
go as expected.  
previous record stop-point  
and the Dissolve start-point.  
This is normal, but this slight  
delay becomes especially  
noticeable when shooting  
fast-moving subject or  
————  
during rapid panning.  
18. The Video Echo mode  
18. The Picture Wipe or  
Dissolve functions are in use.  
WIDE MODEis set to  
SQUEEZEin the Menu  
Screen.  
18. Set WIDE MODEto  
CINEMAor OFFmode  
(pg. 22).  
does not work.  
Do not try to use the Video  
Echo mode during a Fade-In  
or Fade-Out (pg. 24, 26).  
A Fade-In or Fade-Out is in  
progress.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN53  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
19. Even when Slow Shutter is  
not selected, the image  
19 When shooting in the dark,  
the unit becomes highly  
sensitive to light and the  
image takes on an effect  
similar to Slow Shutter.  
19. If you want the lighting to  
look more natural, set GAIN  
UP to AGCor OFFin  
the Menu Screen  
looks like it is activated.  
(pg. 21).  
20. There is no strobe when  
the Classic Film or Strobe  
mode is activated.  
20. The Picture Wipe or  
20. Do not try to use the Classic  
Film or Strobe mode during  
a scene transition  
Dissolve function is in use.  
(pg. 24, 26).  
21. White Balance cannot be  
21. The Sepia or Monotone  
21. Turn off Sepia or Monotone  
before setting White  
activated.  
mode is activated.  
Balance (pg. 26, 28).  
22. When shooting a subject  
illuminated by bright light,  
vertical lines appear.  
22. This is a result of exceed-  
ingly high contrast, and is  
not a malfunction.  
22.  
————  
23. When the screen is under  
direct sunlight during  
shooting, the screen  
becomes red or black for  
an instant.  
23. This is not a malfunction.  
23.  
————  
24. During recording, the date/  
24. DATE/TIMEis set to  
OFFin the Menu Screen.  
Self-Recording is performed.  
24. Set DATE/TIMEto ON”  
in the Menu Screen  
time does not appear.  
(pg. 23).  
During Self-Recording, the  
date/time does not appear  
(pg. 13).  
25. The indicators and  
25. ON SCREENis set to  
SIMPLEor TIME CODE”  
is set to OFFin the Menu  
Screen.  
25. Set ON SCREENto LCD”  
or LCD/TVand set TIME  
CODEto ONin the  
Menu Screen (pg. 23,  
30).  
messages do not appear.  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING (cont.)  
54  
EN  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
26. Adjust the brightness and  
angle of the LCD monitor  
(pg. 12, 13).  
26. Images on the LCD  
monitor appear dark or  
whitish.  
26. In places subject to low  
temperature, images  
become dark due to the  
characteristics of the LCD  
monitor. When this  
happens, the displayed  
colours differ from those  
that are actually recorded.  
This is not a defect of the  
camcorder.  
When the LCD monitors  
fluorescent light reaches the  
end of its service life,  
images on the LCD monitor  
become dark. Consult your  
nearest JVC dealer.  
27. The rear of the LCD  
27. The light used to illuminate  
the LCD monitor causes it to  
become hot.  
27. Close the LCD monitor to  
turn it off or set the Power  
Switch to OFF, and let the  
unit cool down.  
monitor is hot.  
28. The indicators and the  
image colour on the LCD  
monitor are not clear.  
28. This may occur when the  
surface or the edge of the  
LCD monitor is pressed.  
28.  
————  
29. The LCD monitor or  
viewfinder indications  
blink.  
29. Certain Fade/Wipe effects,  
certain modes of  
29. Re-read the sections  
covering Fade/Wipe effects,  
Programme AE with special  
effects and DIS”  
Programme AE with special  
effects, DISand other  
functions that cannot be  
used together are selected at  
the same time.  
(pg. 22, 24 26).  
30. Coloured bright spots  
appear all over the LCD  
monitor or the viewfinder.  
30. The LCD monitor and the  
viewfinder are made with  
high-precision technology.  
However, black spots or  
bright spots of light (red,  
green or blue) may appear  
constantly on the LCD  
30.  
————  
monitor or the viewfinder.  
These spots are not  
recorded on the tape. This is  
not due to any defect of the  
unit. (Effective dots: more  
than 99.99 %)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN55  
SYMPTOM  
POSSIBLE CAUSES  
31. This is normal.  
CORRECTIVE ACTION  
31. During recording, sound  
31.  
————  
cannot be heard.  
32. Play, Rewind and Fast-  
Forward functions do not  
work.  
32. The Power Switch is not set  
to “ ”.  
32. Set the Power Switch to  
(pg. 29).  
33. The tape is moving, but  
33. Your TV has AV input  
terminals, but is not set to its  
VIDEO mode.  
33. Set the TV to the mode  
or channel appropriate  
for video playback  
there is no picture.  
The cassette holder cover is  
open.  
(pg. 32, 33).  
Close the cassette holder  
cover (pg. 10).  
34. The LCD monitor image is  
34. During playback of the  
unrecorded portion, High-  
speed Search and still  
34.  
distorted.  
————  
playback, LCD monitor  
indications appear distorted.  
This is not a defect.  
35. Images on the LCD  
35. The speaker volume is too  
35. Turn the speaker volume  
down (pg. 29).  
monitor are jittery.  
great.  
36. Blocks of noise appear  
during playback, or there is  
no playback picture and  
the screen becomes blue.  
36.  
36. Clean the video heads with  
an optional cleaning  
————  
cassette (pg. 64).  
37. The LCD monitor, the  
viewfinder and the lens  
have become dirty (ex.  
fingerprints).  
37.  
37. Wipe them gently with soft  
cloth. Wiping strongly can  
cause damage (pg. 62).  
————  
38. An unusual mark appears.  
38.  
38. Check the section of the  
manual that explains LCD  
monitor/viewfinder  
————  
indications (pg. 57 59).  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING (cont.)  
56  
EN  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
39. Remove the power supply  
(battery pack, etc.) and wait  
a few minutes for the  
39. An error indication  
(E01 E06) appears.  
39. A malfunction of some kind  
has occurred. In this case  
the camcorders functions  
become unusable.  
indication to clear. When it  
does, you can resume using  
the camcorder.  
If the indication remains  
even though you repeat the  
above two or three times,  
please consult your nearest  
JVC dealer.  
40. The charger indicator on  
the AC Power Adapter/  
Charger does not light.  
40. The temperature of the  
battery is extremely  
40. To protect the battery, it is  
recommended to charge it  
in places with a temperature  
of 10°C to 35°C (pg. 63).  
high/low.  
Charging is difficult in  
places subject to extremely  
high/low temperatures.  
41. Picture does not appear on  
41. The lens cap is attached.  
The LCD monitor's  
brightness setting is too  
dark.  
41. Remove the lens cap  
(pg. 12).  
the LCD monitor.  
Adjust the brightness of the  
LCD monitor (pg. 12).  
If the monitor is tilted  
upward 180 degrees, open  
the monitor fully (pg. 13).  
42. When the image is printed  
from the printer, a black  
bar appears at the bottom  
of the screen.  
42. This is not a malfunction.  
42. By recording with DIS”  
activated (pg. 22) this  
can be avoided.  
43. When the camcorder is  
connected via the DV  
connector, the camcorder  
does not operate.  
43. The DV cable was plugged/  
unplugged with power  
turned on.  
43. Turn the camcorders power  
off and on again, then  
operate it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Indications  
LCD Monitor/Viewfinder Indications During Recording  
EN57  
*
*
4
1 2  
3
*
q
F. AUTO  
40  
SP 35  
x
W
T
5
7
*
6
9
)
*
^
$
REC  
444  
(
PHOTO  
2
&
%
8
+
.
BR I GHT  
1
1
.
00  
#
:
:
TC 23 25  
12 00  
*
@
!
0
*
1 Displays the selected Fade/Wipe effect.  
(pg. 24, 25)  
2 Appears when in the Squeeze or Cinema mode.  
(pg. 22)  
3 Displays the recording mode (SP or LP).  
(pg. 11)  
! BRIGHT : Displays the brightness of the LCD  
monitor. (pg. 12)  
SOUND : Displays the sound mode for  
approx. 5 seconds after turning on  
the camcorder.  
(pg. 21)  
*
@ Displays the Time Code.  
(pg. 17, 23)  
*
# Appears when the focus is adjusted manually.  
(pg. 19)  
(pg. 27)  
% Appears when Digital Image Stabiliser (DIS) is  
engaged. (pg. 22)  
^ Displays the selected Programme AE with special  
effects. (pg. 26)  
& Appears when the exposure is adjusted.  
(pg. 27)  
* Appears when the white balance is adjusted.  
(pg. 28)  
4 Displays the tape remaining time.  
(pg. 12)  
5 Appears during zooming.  
$ Appears when the iris is locked.  
Zoom level indicator  
(pg. 16)  
*
6 RECappears during recording.  
PAUSEappears during Record-Standby mode.  
(pg. 12)  
7 Appears while the tape is running.  
8 Approximate zoom ratio: Appears during  
zooming. (pg. 16)  
: Appears when GAIN UPis set to  
AUTOand the shutter speed is automatically  
adjusted. (pg. 21)  
(pg. 12)  
( Appears when taking a Snapshot. (pg. 14, 15)  
9 Appears when the wind cut mode is engaged to  
cut down on noise created by wind. (pg. 23)  
) Appears when backlight compensation is used.  
(pg. 27)  
0 Displays the date/time.  
(pg. 9)  
*
q Appears when the power switch is set to “ ”.  
(pg. 13)  
*Setting ON SCREENto SIMPLEin the Menu Screen removes indications marked with * from the screen  
(pg. 23, 30).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Indications (cont.)  
LCD Monitor/Viewfinder Indications During Playback  
58  
EN  
1 Displays the sound mode.  
(pg. 30, 31)  
2 Displays the tape speed.  
(pg. 11)  
1
2
3
3 Appears while a tape is running.  
4
: Playback  
3
2
6
: Fast-Forward/Shuttle search  
: Rewind/Shuttle search  
: Pause  
: Forward slow-motion  
: Reverse slow-motion  
: Audio Dubbing  
12B I T  
L
/
SOUND  
1
LP  
4
6
1
e
4
6
6e : Audio Dubbing Pause  
4 Displays the date/time.  
5 Displays the time code.  
(pg. 30, 31)  
(pg. 30, 31)  
VOLUME  
6 BRIGHT : Displays the brightness of the LCD  
1
.
1
.
00  
monitor.  
(pg. 12)  
:
:
:
TC 10 06 20  
12 00  
SOUND : Displays the speaker volume.  
(pg. 29)  
The level indicator moves.  
6
5
4
Warning Indications  
Indications  
Function  
Displays the battery remaining power.  
Remaining power level: high  
Remaining power level: exhausted  
As the battery power comes close to nil, the battery indicator  
blinks.  
When the battery power is exhausted, power turns off automatically.  
Appears when no tape is loaded.  
(pg. 10)  
Appears when the erase protection tab is set to “SAVE” while the Power  
CHECK TAPES ERASE  
PROTECTION SWITCH  
Switch is set to “ ” or “ ”.  
(pg. 10)  
Appears if dirt is detected on the heads . Use an optional cleaning cassette.  
(pg. 64)  
HEAD CLEANING  
REQUIRED USE  
CLEANING CASSETTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN59  
Indications  
Function  
Appears if condensation occurs. When this indication is displayed, wait  
more than 1 hour until condensation disappears.  
CONDENSATION,  
OPERATION PAUSED  
PLEASE WAIT  
Appears if a tape is not loaded when the Recording Start/Stop Button or  
SNAPSHOT Button is pressed while the Power Switch is set to “ ” or  
TAPE!  
.  
Appears when the tape ends during recording or playback.  
Appears if a tape in another format is loaded.  
(pg. 13)  
TAPE END  
DIFFERENT  
FORMATTED TAPE  
Appears when the date/time is not set.  
Appears when the built-in clock battery runs out and the  
(pg. 9)  
SET DATE/TIME!  
previously set date/time is erased. Consult your nearest JVC dealer  
for replacement.  
Appears for 5 seconds after power is turned on if the lens cap is attached.  
LENS CAP  
Appears if Audio Dubbing is attempted on a blank portion of a tape.  
A. DUB ERROR!  
(pg. 49)  
Appears if Audio Dubbing is attempted on a tape recorded in the LP  
A. DUB ERROR!  
<CANNOT DUB  
mode.  
(pg. 49)  
ON AN LP RECORDED  
TAPE>  
Appears if Audio Dubbing is attempted on a tape recorded in 16-bit  
audio.  
(pg. 49)  
<CANNOT DUB  
Appears if A. DUB (e) on the remote control is pressed when the erase  
ON A 16BIT  
protection tab is set to SAVE.  
(pg. 49)  
RECORDING>  
<CHECK TAPES ERASE  
PROTECTION SWITCH>  
Appears if dubbing of copyguarded signals is attempted while this  
camcorder is being used as a recorder.  
COPYING FAILED  
The error indications (E01 E06) show what type of malfunction has  
occured. When an error indication appears, the camcorder turns off  
automatically. Remove the power supply (battery, etc.) and wait a few  
minutes for the indication to clear. When it does, you can resume using the  
camcorder. If the indication remains, consult your nearest JVC dealer.  
E01 E06  
UNIT IN SAFEGUARD  
MODE REMOVE AND  
REATTACH BATTERY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Controls, Connectors And Indicators  
60  
EN  
t
y
)
q
w
1
i u  
e
2
3 4 5 6 7 8  
r
# $ %  
p
o
9 0 ! @  
R T  
W
E
Q
^ & * (  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN61  
Controls  
Connectors  
1 Monitor Open Button [PUSH OPEN] ... pg. 12  
2 Dioptre Adjustment Control ................... pg. 8  
To connect cables to the following connectors  
open the LCD monitor.  
&
and  
*,  
& PC (DIGITAL PHOTO) Connector ........ pg. 34  
3 Battery Release Button  
[BATTERY RELEASE] .............................. pg. 7  
* J Terminal/Edit Connector [JLIP (Joint Level  
Interface Protocol)/EDIT] ...................... pg. 44  
Connect the editing cable when performing  
Random Assemble Editing.  
4 MENU Wheel [+, , PUSH] ............... pg. 20  
LCD Monitor BRIGHT  
(Brightness) Control [+, ] .................. pg. 12  
5 Snapshot Button [SNAPSHOT] ....... pg. 14, 15  
6 Power Zoom Lever [T/W] .................. pg. 16  
Speaker Volume Control [VOL.] ........ pg. 29  
It is used to connect the camcorder to a device  
such as a personal computer.  
For further details, consult your nearest JVC  
dealer.  
7 Snapshot Mode Button [MODE] ........... pg. 14  
8 OPEN/EJECT Switch ............................. pg. 10  
9 Stop Button [5] ................................... pg. 29  
0 Rewind Button [2] ......................... pg. 29  
BACKLIGHT Button .......................... pg. 27  
! Play/Pause Button [4/6] ...................... pg. 29  
@ Fast-Forward Button [3] ................. pg. 29  
FOCUS Button .................................. pg. 19  
( DC Input Connector .............................. pg. 7  
The connectors ) to w are located beneath a cover.  
) Audio/Video Output Connector  
[AV] ........................................ pg. 32, 36, 44  
q Digital Video Connector  
[DV IN/OUT] (i.link*) ........ pg. 34, 35, 37, 38  
* i.Link refers to the IEEE1394-1995 industry  
specification and extensions thereof. The logo  
is used for products compliant with the i.Link  
standard.  
# Power Switch [  
,
,
, OFF] ...... pg. 13  
$ Recording Start/Stop Button.................. pg. 12  
% Lock Button ......................................... pg. 12  
w S-Video Output Connector [S] ... pg. 32, 36, 44  
Indicators  
^ Video Light Switch  
[LIGHT OFF/AUTO/ON]...................... pg. 18  
e Tally Lamp ........................................... pg. 12  
r Power Lamp ........................................ pg. 12  
Other Parts  
t Remote Sensor .................................. pg. 39  
Camera Sensor  
Be careful not to cover this area, a sensor  
necessary for shooting is built-in here.  
y Viewfinder ............................................. pg. 8  
u Video Light .......................................... pg. 18  
i Stereo Microphone .............................. pg. 49  
o Shoulder Strap Eyelets ............................ pg. 8  
p Grip Strap .............................................. pg. 8  
Q Battery Pack Mount ............................... pg. 7  
W LCD Monitor ................................. pg. 12, 13  
E Speaker ............................................... pg. 29  
R Stud Hole .............................................. pg. 8  
T Tripod Mounting Socket ......................... pg. 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER MAINTENANCE  
Cleaning The Camcorder  
62  
EN  
After Use  
Turn off the camcorder.  
To clean the exterior, wipe gently with a soft  
cloth.  
Put the cloth in diluted mild soap and wring it  
well to wipe off heavy dirt. Then wipe again  
with a dry cloth.  
1
2
1
Slide and hold OPEN/EJECT in the direction of  
the arrow, then pull the cassette holder cover  
open until it locks. The cassette holder opens  
automatically. Remove the cassette.  
Press PUSH OPEN and open the LCD monitor.  
Wipe gently with a soft cloth. Be careful not to  
damage the monitor. Close the LCD monitor.  
2
Press PUSH HEREto close the cassette holder.  
Once the cassette holder is closed, it recedes  
automatically. Wait until it recedes completely  
before closing the cassette holder cover.  
3
4
To clean the lens, blow it with a blower brush,  
then wipe gently with lens cleaning paper.  
3
4
Press BATTERY RELEASE and remove the battery  
pack.  
To clean the viewfinder, raise it to the vertical  
position. Carefully open the cover on the  
bottom of the viewfinder 1.  
Insert a lens blower or soft cloth into the gap at  
the bottom of the viewfinder and clean the  
interior of the viewfinder with it 2.  
5
Close the cover. Tilt the viewfinder back to the  
horizontal position.  
6
Remove.  
Cassette holder  
NOTES:  
Avoid using strong cleaning agents such as benzine  
or alcohol.  
Cleaning should be done only after the battery  
pack has been removed or other power units have  
been disconnected.  
Mould may form if the lens is left dirty.  
When using a cleaner or chemically treated cloth  
refer to the cautions of each product.  
OPEN/EJECT  
Switch  
Cassette holder  
cover  
PUSH HERE  
1
Cover  
BATTERY  
RELEASE Button  
Lens  
blower  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
EN63  
Battery Packs  
Video Light  
The supplied battery pack is a  
lithium-ion battery. Before using  
the supplied battery pack or an  
optional battery pack, be sure to  
read the following cautions:  
DANGER  
The video light can become extremely  
hot. Do not touch it either while in  
operation or soon after turning it off,  
otherwise serious injury may result.  
Terminals  
1. To avoid hazards . . .  
.... do not burn.  
Do not place the camcorder into the carrying case  
immediately after using the video light, since it  
remains extremely hot for some time.  
When operating, keep a distance of about 30 cm  
between the video light and people or objects.  
Do not use near flammable or explosive materials.  
It is recommended that you consult your nearest  
JVC dealer for replacing the video light.  
.... do not short-circuit the terminals. When  
transporting, make sure the provided battery  
cap is attached to the battery. If the battery cap  
is misplaced, carry the battery in a plastic bag.  
.... do not modify or disassemble.  
.... do not expose the battery to temperatures  
exceeding 60°C, as this may cause the battery  
to overheat, explode or catch fire.  
General Battery Precautions  
If the remote control is not functioning even if it is  
being operated correctly, the batteries are ex-  
hausted. Replace them with fresh ones.  
.... use only specified chargers.  
2. To prevent damage and prolong service life . . .  
.... do not subject to unnecessary shock.  
.... charge in an environment where temperatures  
are within the tolerances shown in the chart  
below. This is a chemical reaction type  
batterycooler temperatures impede chemical  
reaction, while warmer temperatures can  
prevent complete charging.  
Use only the following batteries: AAA (R03) size x 2  
Please make note of the following rules for battery  
use. When misused, the batteries can leak or  
explode.  
1. When replacing batteries, refer to page 39.  
2. Do not use any different size of batteries from those  
specified.  
.... store in a cool, dry place. Extended exposure  
to high temperatures will increase natural  
discharge and shorten service life.  
3. Be sure to install batteries in the correct direction.  
4. Do not use rechargeable batteries.  
5. Do not expose the batteries to excessive heat as  
they can leak or explode.  
.... fully charge and then fully discharge the  
battery every 6 months when storing the  
battery pack over a long period time.  
.... remove from charger or powered unit when  
not in use, as some machines use current even  
when switched off.  
6. Do not dispose of the batteries in a fire.  
7. Remove the batteries from the unit if it is to be  
stored for an extended period to avoid battery  
leakage which can cause malfunctions.  
NOTES:  
It is normal for the battery pack to be warm after  
charging, or after use.  
Temperature Range Specifications  
Charging ............. 10°C to 35°C  
Operation ........... 0°C to 40°C  
Storage ............... 10°C to 30°C  
Recharging time is based on room temperature of  
20°C.  
The lower the temperature, the longer recharging  
takes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS (cont.)  
64  
EN  
2. Avoid using the unit . . .  
Cassettes  
.... in places subject to excessive humidity or dust.  
.... in places subject to soot or steam such as near  
a cooking stove.  
.... in places subject to excessive shock or  
vibration.  
.... near a television set.  
.... near appliances generating strong magnetic or  
electric fields (speakers, broadcasting anten-  
nas, etc.).  
.... in places subject to extremely high (over 40°C)  
or extremely low (under 0°C) temperatures.  
3. DO NOT leave the unit . . .  
.... in places of over 50°C.  
.... in places where humidity is extremely low  
(below 35%) or extremely high (above 80%).  
.... in direct sunlight.  
.... in a closed car in summer.  
.... near a heater.  
4. To protect the unit, DO NOT . . .  
.... allow it to become wet.  
To properly use and store your cassettes, be sure to  
read the following cautions:  
1. During use . . .  
.... make sure the cassette bears the Mini DV mark.  
.... be aware that recording onto prerecorded  
tapes automatically erases the previously  
recorded video and audio signals.  
.... make sure the cassette is positioned properly  
when inserting.  
.... do not load and unload the cassette  
repeatedly without allowing the tape to run at all.  
This slackens the tape and can result in damage.  
.... do not open the front tape cover. This exposes  
the tape to fingerprints and dust.  
2. Store cassettes . . .  
.... away from heaters or other heat sources.  
.... out of direct sunlight.  
.... where they wont be subject to unnecessary  
shock or vibration.  
.... drop the unit or strike it against hard objects.  
.... subject it to shock or excessive vibration  
during transportation.  
.... keep the lens directed at extremely bright  
objects for long periods.  
.... where they wont be exposed to strong  
magnetic fields (such as those generated by  
motors, transformers or magnets).  
.... vertically, in their original cases.  
.... expose the lens to direct sunlight.  
.... carry it by holding the LCD monitor or the  
viewfinder.  
LCD Monitor  
1. To prevent damage to the LCD monitor,  
DO NOT . . .  
.... swing it excessively when using the shoulder  
strap or the grip.  
.... push it strongly or apply any shocks.  
.... place the camcorder with the LCD monitor on  
the bottom.  
5. Dirty heads can cause the following problems:  
2. To prolong service life . . .  
.... avoid rubbing it with coarse cloth.  
3. Be aware of the following phenomena for LCD  
monitor use.  
These are not malfunctions:  
While using the camcorder, the surface around  
the LCD monitor and/or the back of the LCD  
monitor may heat up.  
If you leave power on for a long time, the  
surface around the LCD monitor becomes hot.  
No picture during playback.  
Blocks of noise appear during playback.  
During recording, the Head Clog Warning  
indicator “ ” appears.  
In such cases, use an optional cleaning cassette.  
Insert it and play back. If the cassette is used  
more than once consecutively, damage to the  
video heads may result. After the camcorder  
plays back for about 20 seconds, it stops  
automatically. Also refer to the cleaning cassettes  
instructions.  
If, after using the cleaning cassette, the problems  
still exist, consult your nearest JVC dealer.  
Mechanical moving parts used to move the video  
heads and video tape tend to become dirty and  
worn out over time. In order to maintain a clear  
picture at all times, periodic check-ups are  
recommended after using the unit for about  
1,000 hours. For periodic check-ups please  
consult your nearest JVC dealer.  
Main Unit  
1. For safety, DO NOT . . .  
.... open the camcorders chassis.  
.... disassemble or modify the unit.  
.... short-circuit the terminals of the battery pack.  
Keep it away from metallic objects when not in  
use.  
.... allow inflammables, water or metallic objects  
to enter the unit.  
.... remove the battery pack or disconnect the  
power supply while the power is on.  
.... leave the battery pack attached when the  
camcorder is not in use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN65  
Serious malfunctioning  
How To Handle A CD-ROM  
If malfunctioning occurs, stop using the unit  
immediately and consult your local JVC dealer.  
Take care not to soil or scratch the mirror surface  
(opposite to the printed surface). Do not write  
anything or put a sticker on either the front or  
back surface. If the CD-ROM gets dirty, gently  
wipe it with a soft cloth outward from the centre  
hole using a circular motion.  
The camcorder is a microcomputer-controlled  
device. External noise and interference (from a  
TV, a radio, etc.) might prevent it from function-  
ing properly. In such cases, first disconnect its  
power supply unit (battery pack, AC Power  
Adapter/Battery Charger, etc.) and wait a few  
minutes and then re-connect it and proceed as  
usual from the beginning.  
Do not use conventional disc cleaners or cleaning  
spray.  
Do not bend the CD-ROM or touch its mirror  
surface.  
Do not store your CD-ROM in a dusty, hot or  
humid environment. Keep it away from direct  
sunlight.  
About moisture condensation . . .  
You have observed that pouring a cold liquid  
into a glass will cause drops of water to form  
on the glassouter surface. This same  
phenomenon occurs on the head drum of a  
camcorder when it is moved from a cool  
place to a warm place, after heating a cold  
room, under extremely humid conditions or  
in a place directly subjected to the cool air  
from an air conditioner.  
Moisture on the head drum can cause severe  
damage to the video tape, and can lead to  
internal damage to the camcorder itself.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TERMS  
66  
EN  
A
F
AC Power Adapter/Charger ..................... pg. 6, 7  
Audio Dubbing ........................................ pg. 49  
Auto Focus ............................................... pg. 19  
Auto Shut off ...................................... pg. 13, 29  
Fade-In/Out ........................................ pg. 24, 25  
Fast-Forward The Tape .............................. pg. 29  
Frame-By-Frame Playback .................. pg. 29, 41  
G
B
Gain Up ................................................... pg. 21  
Grip Adjustment ......................................... pg. 8  
Backlight Compensation ........................... pg. 27  
Battery Low .............................................. pg. 58  
Battery Pack ..................................... pg. 6, 7, 63  
Brighten The LCD Monitor ........................ pg. 12  
I
Icons ................................................ pg. 21 23  
Iris............................................................ pg. 27  
Iris Lock ................................................... pg. 27  
C
Channels (Left/Right) ................................. pg. 31  
Charge The Battery Pack ............................. pg. 6  
Cinema .................................................... pg. 22  
Classic Film .............................................. pg. 26  
Clean The Camcorder ............................... pg. 62  
Connections ...................... pg. 7, 32, 34 38, 44  
J
Journalistic Shooting ................................. pg. 13  
L
LCD monitor/Viewfinder  
Indications ..................................... pg. 57 59  
Load A Tape ............................................. pg. 10  
D
Darken The LCD Monitor ......................... pg. 12  
Date/Time Display ........................ pg. 23, 30, 31  
Date/Time Settings ...................................... pg. 9  
Demonstration Mode ............................ pg. 5, 22  
Digital Zoom ...................................... pg. 16, 21  
DIS (Digital Image Stabiliser) ..................... pg. 22  
Dioptre Adjustment .................................... pg. 8  
Dubbing ........................................... pg. 36 38  
M
Manual Focus........................................... pg. 19  
Menu Screen, CAMERA MENU........... pg. 21, 22  
Menu Screen, DISPLAY MENU ........... pg. 23, 30  
Menu Screen, MANUAL MENU.......... pg. 22, 23  
Menu Screen, VIDEO MENU .................... pg. 30  
Monotone ................................................ pg. 26  
E
Erase Protection ........................................ pg. 10  
Exposure Control ...................................... pg. 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN67  
P
T
Picture Wipe/Dissolve......................... pg. 24, 25  
Playback Special Effects ............................ pg. 42  
Playback Zoom ........................................ pg. 41  
Power Switch Position .............................. pg. 13  
Printer ...................................................... pg. 35  
Programme AE With Special Effects ........... pg. 26  
Provided Accessories .................................. pg. 4  
Tally ................................................... pg. 12, 21  
Tele Macro ............................................... pg. 22  
Time Code.............................. pg. 17, 23, 30, 31  
Tripod Mounting ......................................... pg. 8  
Twilight .................................................... pg. 26  
U
Unload A Tape ......................................... pg. 10  
R
V
Random Assemble Editing................. pg. 43 48  
Record-Standby ........................................ pg. 12  
Recording Mode ....................................... pg. 11  
Remote Control ........................................ pg. 39  
Reset ........................................................ pg. 23  
Rewind The Tape ...................................... pg. 29  
Video Echo ............................................... pg. 26  
Video Light ............................................... pg. 18  
W
White Balance .......................................... pg. 28  
Wide Mode .............................................. pg. 22  
Wind Cut ................................................. pg. 23  
Wipe In/Out ....................................... pg. 24, 25  
S
Self-Recording .......................................... pg. 13  
Sepia ........................................................ pg. 26  
Set Remote Control/VCR Code .................. pg. 43  
Shuttle Search........................................... pg. 29  
Shutter Speed ........................................... pg. 26  
Slow-Motion Playback .............................. pg. 41  
Slow Shutter ............................................. pg. 26  
Snapshot ............................................ pg. 14, 15  
Snapshot Mode .................................. pg. 14, 15  
Sound Mode................................. pg. 21, 30, 31  
Speaker Volume ....................................... pg. 29  
Specifications ..................................... pg. 68, 69  
Squeeze ................................................... pg. 22  
Still Playback ............................................ pg. 29  
Strobe ...................................................... pg. 26  
Z
Zooming .................................................. pg. 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
68  
EN  
Camcorder  
For General  
Power supply  
: DC 6.3 V  
DC 7.2 V  
(Using AC Power Adapter/Charger)  
(Using battery pack)  
Power consumption  
LCD monitor off, viewfinder on  
LCD monitor on, viewfinder off  
Video light  
: Approx. 4.3 W  
: Approx. 5.3 W  
: Approx. 3.5 W  
Dimensions (W x H x D)  
: 80 mm x 96 mm x 170 mm  
(with the LCD monitor closed and the viewfinder pushed down)  
Weight  
: Approx. 560 g  
Operating temperature  
Operating humidity  
Storage temperature  
Pickup  
: 0°C to 40°C  
: 35% to 80%  
: 20°C to 50°C  
: 1/4" CCD  
Lens  
: F 1.8, f = 3.6 mm to 36 mm, 10:1 power zoom lens  
: ø37 mm  
: 2.5" diagonally measured, LCD panel/TFT active matrix system  
: Electronic viewfinder with 0.24" black/white LCD  
: Monaural  
Filter diameter  
LCD monitor  
Viewfinder  
Speaker  
For Digital Video Camera  
Format  
Signal format  
: DV format (SD mode)  
: PAL standard  
Recording/Playback format  
: Video: Digital component recording  
: Audio: PCM digital recording, 32 kHz 4-channel (12-bit),  
48 kHz 2-channel (16-bit)  
Cassette  
: Mini DV cassette  
Tape speed  
: SP: 18.8 mm/s  
LP: 12.5 mm/s  
Maximum recording time  
(using 80 min. cassette)  
: SP: 80 min.  
LP: 120 min.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN69  
For Connectors  
S
: Y : 1 V (p-p), 75 , analogue output  
C : 0.29 V (p-p), 75 , analogue output  
AV  
Video output  
Audio output  
DV  
: 1 V (p-p), 75 , analogue  
: 300 mV (rms), 1 k, analogue, stereo  
Input/output  
PC (DIGITAL PHOTO)  
Digital still output  
JLIP/EDIT  
: 4-pin, IEEE 1394 compliant  
: ø2.5 mm, 3-pole  
: ø3.5 mm, 4-pole  
AC Power Adapter/Charger AA-V40A/AS  
Power requirement  
Power consumption  
Output  
: AC 110 V to 240 V`, 50 Hz/60 Hz  
: 23 W  
Charge  
VTR  
: DC 7.2 V  
: DC 6.3 V  
, 1.2 A  
, 1.8 A  
Dimensions (W x H x D)  
Weight  
: 68 mm x 38 mm x 110 mm  
: Approx. 260 g  
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject  
to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
VICTOR COMPANY OF JAPAN, LIMITED  
®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.  
COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD.  
0P5ri0n0teMdKinV*JaUpNan*SN  
A
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Speaker nF4X User Manual
Ingersoll Rand Marine Sanitation System 61001 User Manual
Insignia Water Dispenser NS LT500P 1 User Manual
Jet Tools Saw XACTA User Manual
John Deere Saw ET 3402 J User Manual
Jonsered Lawn Mower LM2147 CM User Manual
Kensington Fax Machine 62024 User Manual
Kenwood Computer Drive CA U1EX User Manual
Keurig Coffeemaker B60 User Manual
Konica Minolta Camera Accessories T 10A T 10MA T 10WSA T 10WLA User Manual