OPERATOR'S MANUAL
361T538Fxx
361T538Fxx 1 1/4in. FILTER ASSEMBLY
IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING,
OR SERVICING THIS EQUIPMENT
364-295
409-464
ViISUAL INDICATOR
BRACKET
r 120PSI
350-292
O-Ring (2)
1 1/4 in. NPT
Threads
360-003
O’RING
FILTER ELEMENT
361T538ESP STAB POINT
361T538E03 30 MESH
361T538E04 40 MESH
361T538E06 60 MESH
362-333
TEFLON
BACK-UP
RING
361T538RK
REPAIR KIT
INCLUDES:
361T538E09 90 MESH
(1) 360-003 O’RING
(1) 362-333 BACK-UP
RING
300-847
BLEEDER
VALVE
350-214
HP STREET
ELBOW
FILTER ASSEMBLY PART NUMBERS
361T538FSP
361T538F03
361T538F04
361T538F06
361T538F09
STAB POINT
30 Mesh Element
40 Mesh Element
60 Mesh Element
90 Mesh Element
Large orifice
.022 in. orifice
.015 in. orifice
.010 in. orifice
.0065 in. orifice
WHEN REPAIRING THE FILTER TURN OFF THE
PUMP SUPPLY PRESSURE AND BLEED THE
MATERIAL PRESSURE FROM THE PUMPING
SYSTEM AND FILTER BOWL.
REBUILDING INSTRUCTIONS
1) Close the ball valves and depressurize the
filter by opening the bleeder valve.
2) Unscrew the Filter Bowl and remove the
Element.
MAINTENANCE
Replace the Filter element when there is a 500-
pound pressure drop across it.
Note: Material must be flowing to check the
3) Clean the Filter Bowl and Housing.
4) Replace the O’ring and Back-up Ring and
lubricate.
pressure drop.
5) Install new Element in the Filter Housing.
6) Thread on the Bowl and tighten to 50 Ft. Lbs.
Ingersoll-Rand
1872 Enterprise Drive
Phone
(248) 293-5700
Rochester Hills MI 48309
Tech Support (866) 284-5509
Doc#: D-361T538Fxx
Rev. Level B
Date: June 2003
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|