JVC Car Video System TM A13SU User Manual

COLOR VIDEO MONITOR  
INSTRUCTIONS  
TM-A13SU  
TM-A13UCV  
TM-A13SU-W  
For Customer Use:  
Enter below the Model No. and Serial No. which is located  
on the rear of the cabinet. Retain this information for future  
reference.  
+
B
A
ON  
OFF  
INPUTSELECT  
PHASE CHROMA BRIGHT CONTRAST MENU  
VOLUME/SELECT  
Model No. :  
Serial No. :  
POWER  
TM-A13SU  
(TM-A13SU shown)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
SAFETY PRECAUTIONS .......................................................................................... 2  
CONTROLS AND FEATURES................................................................................... 4  
HOW TO HANDLE BASIC OPERATIONS ................................................................ 6  
HOW TO USE THE MENU FUNCTIONS................................................................... 7  
HOW TO INITIALIZE THE SETTING ....................................................................... 10  
BASIC CONNECTION EXAMPLE ............................................................................11  
TROUBLESHOOTING ............................................................................................. 12  
SPECIFICATIONS.................................................................................................... 13  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS AND FEATURES  
FRONT VIEW  
[TM-A13SU / TM-A13SU-W]  
<Front Panel>  
+
B
A
ON  
OFF  
INPUTSELECT  
PHASE CHROMA BRIGHT CONTRAST MENU  
VOLUME/SELECT  
POWER  
TM-A13SU  
(Front Panel view of TM-A13SU shown)  
[TM-A13UCV]  
+
B
A
_ON  
OFF  
PHASE CHROMA BRIGHT CONTRAST MENU  
VOLUME/SELECT  
I
N
P
U
TS  
E
L
E
C
T
POWER  
TM-A14PN  
+
B
A
ON  
OFF  
(Front view of TM-A13SU shown)  
INPUTSELECT  
PHASE CHROMA BRIGHT CONTRAST MENU  
SELECT  
POWER  
TM-A13UCV  
Notes:  
1 Phase button [PHASE  
]
Press this button to set the picture hue adjustment mode.  
Adjust the value with the VOLUME/SELECT 6 or the  
SELECT 7 buttons. Also used as a control button in the  
menu function mode.  
* The VIDEO B terminals include a video terminal (BNC  
connector) and a Y/C terminal (mini-DIN 4-pin connector).  
The Y/C (S-video) terminal is given priority.  
* There is no Y/C terminal or AUDIO B terminal on the TM-  
A13UCV. They are only available on the TM-A13SU and  
TM-A13SU-W.  
2 Chroma button [CHROMA  
]
Press this button to set the picture color density adjust-  
ment mode. Adjust the value with the VOLUME/SELECT  
6 or the SELECT 7 buttons. Also used as a control  
button in the menu function mode.  
9 Input A button [INPUT SELECT A]  
Selects the video signal input to the VIDEO A terminal  
(BNC connector) and the audio signal input to the AUDIO A  
terminal (RCA connector) on the rear panel. When  
selected, the input A indicator # lights.  
3 Brightness button [BRIGHT  
]
Press this button to adjust picture brightness. Adjust the  
value with the VOLUME/SELECT 6 or the SELECT  
7 buttons. Also used as a control button in the menu  
function mode.  
Note:  
* There is no AUDIO A terminal on the TM-A13UCV. It is  
only available on the TM-A13SU and TM-A13SU-W.  
4 Contrast button [CONTRAST  
]
10 Power indicator  
Press this button to adjust picture contrast. Adjust the  
value with the VOLUME/SELECT 6 or the SELECT  
7 buttons. Also used as a control button in the menu  
function mode.  
Lights in green when the power is ON.  
Lit : When the power is on.  
Unlit : When the power is off.  
11 Power switch [POWER  
]
5 Menu button [MENU]  
Press this switch to turn the power on or off.  
_ ON : Power is turned on.  
OFF : Power is turned off.  
Displays and disappears the <MENU> screen.  
Pressing the PHASE button with the Menu button  
depressed will display the <SET-UP MENU> screen.  
12 Input B indicator  
6 Volume/Select buttons [VOLUME/  
Lights in green when the Input B is selected.  
SELECT –  
+] (TM-A13SU and TM-A13SU-W only)  
Adjusts the speaker volume. Also used as a control button  
in the menu function mode.  
13 Input A indicator  
Lights in green when the Input A is selected.  
7 Select buttons [SELECT – /+] (TM-A13UCV only)  
14 Built-in speaker  
Used as a control button in the menu function mode.  
(TM-A13SU and TM-A13SU-W only)  
The speaker is located inside.  
8 Input B button [INPUT SELECT B]  
Selects the video signal input to the VIDEO B terminal and  
the audio signal input to the AUDIO B terminal (RCA  
connector) on the rear panel. When selected, the input B  
indicator @ lights.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR VIEW  
<Rear Panel>  
[TM-A13SU / TM-A13SU-W]  
VIDEO  
AUDIO  
A
B
A
B
IN  
IN  
Y/C IN  
IN  
OUT  
OUT  
OUT  
VIDEO  
AUDIO  
A
B
A
B
IN  
IN  
Y/C IN  
IN  
OUT  
OUT  
OUT  
[TM-A13UCV]  
VIDEO  
A
(Rear view of TM-A13SU shown)  
To AC outlet  
(120 V AC, 50/60 Hz)  
B
IN  
IN  
OUT  
OUT  
17 Audio A terminal [AUDIO A IN/OUT]  
(TM-A13SU and TM-A13SU-W only)  
Input (IN) and output (OUT) terminals for the audio signal  
corresponding the VIDEO A terminals %. The output  
terminal is bridge-connected.  
IN : Audio signal input terminal  
OUT : Bridge-connected audio signal output terminal  
15 Video A terminals [VIDEO A IN/OUT]  
Video signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
IN : Video signal input terminal  
OUT : Bridge-connected video signal output terminal  
Notes:  
Notes:  
* For corresponding video signals, use the VIDEO A  
terminal %.  
* There is no AUDIO A terminal on the TM-A13UCV. It is  
only available on the TM-A13SU and TM-A13SU-W.  
* Also refer to the Basic connection Example on page 11.  
* For corresponding audio signals, use the AUDIO A  
terminals &.  
* There is no AUDIO A terminal on the TM-A13UCV. It is  
only available on the TM-A13SU and TM-A13SU-W.  
* Also refer to the Basic connection Example on page 11.  
18 Audio B terminals [AUDIO B IN/OUT]  
(TM-A13SU and TM-A13SU-W only)  
16 Video B terminals [VIDEO B IN/OUT]  
[ BNC connector ]  
Input (IN) and output (OUT) terminals for the audio signals  
corresponding to the VIDEO B terminals ^. The output  
terminal is bridge-connected.  
Video signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
IN  
: Video signal input terminal  
IN  
: Audio signal input terminal  
OUT : Bridge-connected video signal output terminal  
OUT : Bridge-connected audio signal output terminal  
[ Y/C connector ] (TM-A13SU and TM-A13SU-W only)  
Y/C (S-Video) signal input (mini-DIN 4-pin connector)  
terminal.  
Notes:  
* For corresponding video signals, use the VIDEO B  
terminals ^.  
* There is no Y/C terminal or AUDIO B terminal on the  
TM-A13UCV. They are only available on the TM-A13SU  
and TM-A13SU-W.  
Y/C IN : Y/C signal input terminal.  
Notes:  
* For corresponding audio signals, use the AUDIO B  
terminals *.  
* There is no Y/C terminal or AUDIO B terminal on the  
TM-A13UCV. They are only available on the TM-A13SU  
and TM-A13SU-W.  
* There is no Y/C (S-video) signal output terminal.  
* When both VIDEO B terminals are connected (input) at  
the same time, the Y/C terminal is given priority.  
* Also refer to the Basic connection Example on page 11.  
* Also refer to the Basic connection Example on page 11.  
19 AC Inlet [AC IN]  
Power input connector. Connect the provided AC power  
cord ) to an AC outlet (120 V AC, 50/60 Hz).  
20 Power cord  
Connects the provided power cord (120 V AC, 50/60 Hz)  
to the AC IN connector.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO HANDLE BASIC  
OPERATIONS  
BASIC OPERATION  
1. Press the POWER switch to turn on the power.  
Color system indication  
(NTSC or PAL )  
NTSC  
_ON : Power turns ON. (Power indicator: lit)  
OFF : Power turns OFF. (Power indicator: unlit)  
ON  
OFF  
POWER  
2. Press the INPUT SELECT button to choose input.  
Selects video/audio signals input to terminals on the rear  
panel.  
B
A
INPUT  
SELECT  
button  
With regard to Color system indication  
Terminals on the rear panel  
With the COLOR SYSTEM setting set  
to AUTO mode, when you turn on the  
power or select inputs, the color  
system indication appears for about 3  
seconds on the screen while PAL or  
NTSC signals are being detected.  
It does not appear when receiving B/  
W signal or when no signal is input.  
See page 7 for COLOR SYSTEM  
INPUTSELECT  
Video signal input  
Audio signal input  
AUDIO A terminal  
AUDIO B terminal  
1 Input A VIDEO A terminal  
2 Input B VIDEO B terminal  
* Audio signal input is not available on the TM-A13UCV.  
3. Press the VOLUME/SELECT button to adjust the  
speaker volume.  
setting.  
00 ~ 50  
(Audio is only available on the TM-A13SU and TM-A13SU-W.)  
+
Press this button to display the speaker volume level on the  
screen.  
+ : The Built-in speaker volume is increased. (00 = 50)  
– : The Built-in speaker volume is decreased. (50 = 00)  
* Screen indication will disappear about 10 seconds after  
operating.  
VOLUME/SELECT  
(TM-A13SU / TM-A13SU-W)  
VOLUME  
:
20  
+
PICTURE ADJUSTMENT  
–20 ~ +20  
1. Press select button corresponding to the item you  
want to adjust.  
The item you select is displayed on the screen.  
1 PHASE (  
2 CHROMA ( ) : Chroma control  
3 BRIGHT ( ) : Brightness control  
4 CONTRAST ( ) : Contrast control  
) : Phase control  
PHASE CHROMA BRIGHT CONTRAST  
PHASE  
:
00  
2. Adjust with the VOLUME/SELECT or the SELECT  
button.  
VOLUME/SELECT button  
Items  
+
+
+
Notes:  
PHASE  
(Phase)  
reddish  
greenish  
VOLUME/SELECT  
Phase control is effective only in the  
NTSC color system mode.  
Chroma control is not effective when  
receiving B/W or when no signal is  
input.  
When the Chroma control is set to  
level " –20", the picture turns  
monochrome.  
(TM-A13SU / TM-A13SU-W)  
CHROMA  
(Chroma)  
lighter  
darker  
lower  
deeper  
brighter  
higher  
+
BRIGHT  
(Brightness)  
SELECT  
CONTRAST  
(Contrast)  
(TM-A13UCV)  
" NO EFFECT" is displayed (For  
about 3 seconds) when your selected  
function has no effect.  
* Screen indication will disappear about 10 seconds  
after operating.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MENU FUNCTIONS  
DISPLAY AND SELECTION IN THE <MENU> SCREEN  
MODE (SETTING)  
You can set the following menu items.  
Set them depending on your needs.  
<MENU> screen  
• SHARPNESS  
• COLOR SYSTEM  
1
2
<MENU >  
SHARPNESS  
COLOR SYSTEM  
:
00  
: AUTO  
1. Press the MENU button.  
3
4
The <MENU> screen is displayed.  
MENU  
EXIT  
2. Press the PHASE (  
to select MENU items.  
) or CHROMA (  
) button  
A selection mark (3) is put next to the selected item.  
+
Front panel  
button  
Function  
displayed  
PHASE CHROMA  
Contents  
PHASE CHROMA BRIGHT CONTRAST MENU  
VOLUME/SELECT  
SHARPNESS  
PHASE (  
)
Advance selection mark (3)  
Reverse selection mark (2)  
<Front panel button>  
COLOR SYSTEM  
CHROMA (  
)
5
1 Selection mark (3): Indicates the  
menu item you select.  
2 Menu item: Menu items you can  
select.  
3. Press the VOLUME/SELECT or the SELECT button  
to set.  
3 Setting display: Indicates the  
current settings (value).  
4 Function display: The functions of  
the front panel buttons (7 buttons on  
the left.) correspond to the function  
displayed.  
+
Front panel  
button  
Function  
displayed  
Contents  
VOLUME/SELECT  
VOLUME/  
SELECT (+) or  
SELECT (+)  
+
3
Increase (to max. value)  
Advance the setting value  
Decrease (to min. value)  
Reverse the setting value  
(TM-A13SU / TM-A13SU-W)  
Function  
Contens  
displayed  
+
VOLUME/  
SELECT (–) or  
SELECT (–)  
5
Advance the menu item.  
Reverse the menu item.  
2
SELECT  
(TM-A13UCV)  
Lower the adjustment  
value. (to the minimum)  
Menu items  
Purpose  
Setting range  
+
Raise the adjustment  
value. (to the maximum)  
SHARPNESS  
Picture sharpness  
00  
+1  
+2  
+3  
+4  
+5  
COLOR  
SYSTEM  
AUTO  
NTSC  
PAL  
3
2
Advance the setting value.  
Reverse the setting value.  
Exits the <MENU> screen.  
Color system  
* Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good,  
set it to the exclusive mode (NTSC or PAL) corresponding to the received color system.  
EXIT  
4. If you want to set the other menu items, repeat  
procedures 2 and 3.  
5. Press the MENU button to quit.  
Front panel  
button  
Function  
displayed  
Contents  
MENU  
Quit (or Release) the <MENU>  
screen  
MENU  
EXIT  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MENU  
FUNCTIONS (cont'd)  
DISPLAY AND SELECTIONS IN THE <SET-UP MENU>  
MODE (SETTING)  
<SET-UP MENU> screen  
You can set the following set-up menu items.  
H. POSITION  
WHITE BALANCE  
CONTROL LOCK  
1
<SET–UP MENU>  
H. POSITION  
WHITE BALANCE  
CONTROL LOCK  
:
00  
Note:  
: OFF  
3
4
2
Parameters for H. POSITION can be set separately depending on the video input (Input  
A or Input B) selected by the input select buttons on the front panel.  
Select the required video input with the input select buttons on the front panel in  
advance.  
EXIT  
1. While pressing the MENU button, press the  
+
PHASE (  
) button.  
PHASE CHROMA BRIGHT CONTRAST MENU  
VOLUME/SELECT  
The <SET-UP MENU> screen is displayed.  
<Front panel button>  
PHASE  
MENU  
1 Selection mark (3): Indicates the  
menu item you select.  
2. Press the PHASE (  
) or CHROMA (  
) button  
2 Menu item: Menu items you can  
select.  
3 Setting display: Indicates the  
current settings (value).  
4 Function display: The functions of  
the front panel buttons (7 buttons on  
the left.) correspond to the function  
displayed.  
to select the desired menu item.  
A selection mark (3) is put next to the selected item.  
Front panel  
button  
Function  
displayed  
Contents  
PHASE CHROMA  
H. POSITION  
PHASE (  
CHROMA (  
)
Advance selection mark (3)  
Reverse selection mark (2)  
WHITE BALANCE  
CONTROL LOCK  
)
5
Function  
Contens  
displayed  
5
Advance the menu item.  
Reverse the menu item.  
3. Press the VOLUME/SELECT or the SELECT button  
to set.  
Lower the adjustment  
value. (to the minimum)  
Front panel  
button  
Function  
displayed  
Contents  
+
Raise the adjustment  
+
value. (to the maximum)  
+
Increase (to max. value)  
Advance the setting value  
3
2
Advance the setting value.  
Reverse the setting value.  
VOLUME/  
SELECT (+) or  
SELECT (+)  
VOLUME/SELECT  
3
(TM-A13SU / TM-A13SU-W)  
CUTO  
Selects CUT OFF setting  
screen  
Exit the <SET-UP MENU>  
screen (release)  
EXIT  
DRV  
+
Selects DRV adjustment  
2
Decrease (to min. value)  
Reverse the setting value  
Selects DRIVE setting screen  
VOLUME/  
SELECT (–) or  
SELECT (–)  
Selects CUT OFF  
adjustment  
CUTO  
SELECT  
DRV  
(TM-A13UCV)  
R
G
B
Adjusts red signal level  
Adjusts green signal level  
Adjusts blue signal level  
Notes:  
For the WHITE BALANCE setting, select the CUT OFF or  
DRIVE setting screen, then select the buttons (PHASE/  
CHROMA/BRIGHT) corresponding to the function indicated  
(R/G/B).  
To return to the <SET-UP MENU> screen, press the EXIT  
(MENU) button.  
Turns the ON-SCREEN  
display on or off. (This  
function is effective only in  
the DRIVE or CUT OFF  
adjustment mode.)  
DISP  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-up menu items  
Purpose  
Settings  
H. POSITION  
Adjusts the horizontal position of  
the screen (+ : Horizontal position  
shifts to the right/–: Horizontal  
position shifts to the left)  
–05 –04 01 00 +01 +04 +05  
WHITE BALANCE  
Adjusts the white balance  
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.  
Screen setting is changed to the selected setting mode.  
Select R/G/B buttons corresponding to the function display  
to adjust.  
DRIVE  
R.DRIVE  
B.DRIVE  
Adjusts red level  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
Adjusts blue level  
Adjusts red cut off  
Adjusts green cut off  
Adjusts blue cut off  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
CUT OFF R. CUT OFF  
G. CUT OFF  
B. CUT OFF  
CONTROL LOCK  
Sets the operation buttons on the  
front panel to control lock mode  
OFF  
ON  
4. To set the other set-up menu items, repeat the  
procedures 2 and 3.  
Notes:  
When the CONTROL LOCK function  
is set to ON, pressing operation  
buttons on the front panel will display  
the message "CONTROL LOCK ON!"  
on the screen for about 3 seconds.  
The CONTROL LOCK function is  
maintained even when the power is  
turned off.  
To turn off the CONTROL LOCK  
function, while holding the MENU  
button press the PHASE button. Then  
set the CONTROL LOCK function to  
OFF.  
5. Press the MENU button to quit.  
Front panel  
button  
Function  
displayed  
Contents  
MENU  
Quit (or Release) the <MENU>  
screen  
MENU  
EXIT  
Even when the CONTROL LOCK  
function is set to ON, the following  
operations are available:  
– Power Switch operation.  
– Sound volume adjustment with the  
VOLUME/SELECT button. (Audio is  
only available on the TM-A13SU  
and TM-A13SU-W.)  
– Display or disappear of the <SET-  
UP MENU> screen.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO INITIALIZE THE  
SETTING  
SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP  
MENU> RESET MODE  
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and  
the volume level to their factory-set (initial) values.  
<SET-UP MENU> RESET screen  
<SET–UP MENU> RESET  
Are you sure ?  
1. Press the Power ( ) Switch to turn the power  
Yes”  
“No”  
then <CONTRAST>  
then <+> or <–>  
OFF ().  
ON  
OFF  
POWER  
2. While pressing both MENU button and PHASE (  
buttons, press the Power ( ) switch to turn the  
)
Initial settings  
Initialization  
(setting)  
Functions (Items)  
power ON (_).  
The <SET-UP MENU> RESET screen is displayed.  
SHARPNESS  
COLOR SYSTEM AUTO  
00  
ON  
OFF  
Note:  
PHASE  
MENU  
POWER  
The <SET-UP MENU> RESET screen will not be  
displayed if the MENU or PHASE buttons are pressed  
for a very short time. Keep pressing them until the  
display screen appears.  
H. POSITION  
00  
WHITE BALANCE  
R. CUT OFF 00  
G. CUT OFF 00  
B. CUT OFF 00  
3. Setting  
R. DRIVE  
B. DRIVE  
00  
00  
Initialization is required.  
CONTROL LOCK OFF  
Press the CONTRAST ( ) button.  
* When initialization is completed, and the <SET-UP  
MENU> RESET screen disappears.  
PHASE  
00  
00  
00  
00  
CONTRAST  
CHROMA  
CONTRAST  
BRIGHT  
Initialization is not required.  
+
Press the VOLUME/SELECT [+] or [–] button or the  
SELECT [+] or [–] button.  
VOLUME  
20  
* Initialization is aborted, and the <SET-UP MENU>  
VOLUME/SELECT  
RESET screen disappears.  
(TM-A13SU / TM-A13SU-W)  
* Volume is only available on the TM-  
A13SU and TM-A13SU-W.  
+
SELECT  
(TM-A13UCV)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC CONNECTION EXAMPLE  
Notes:  
Before connecting your system, make sure that all units are turned off.  
The illustration below shows some examples of different connections. Terminal connections may differ depending on the  
component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.  
Each pair of input (IN) and output (OUT) terminals are bridge-connected. However, the Y/C input terminal (Y/C IN) has no output  
terminal (OUT) corresponding to it. (There is no Y/C terminal on the TM-A13UCV.)  
If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the  
bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).  
When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video  
components.  
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused  
by the same video signal “looping” between the VCRs, and is not a malfunction.)  
Select the video input (Input A or Input B) with the input select button on the front panel.  
There is no Y/C terminal or AUDIO terminal on the TM-A13UCV.  
7 VIDEO A Connection Example  
7 VIDEO B Connection Example  
(Select Input A button)  
(Select Input B button)  
Video Camera  
Video Monitor  
VCR  
Video Camera  
Video Monitor  
VCR  
Audio *1  
(Audio signal cable)  
*2  
Y/C (S-video)  
(Y/C (S-video) signal cable)  
Audio *3  
(Audio signal cable)  
Video  
(Video signal cable)  
Video  
(Video signal cable)  
VIDEO  
AUDIO  
B
VIDEO  
AUDIO  
A
A
B
A
A
B
B
IN  
IN  
IN  
IN  
Y/C IN  
Y/C IN  
IN  
IN  
OUT  
OUT  
OUT  
OUT  
OUT  
OUT  
Audio  
(Audio signal cable)  
Video  
(Video signal cable)  
*1  
Audio  
*3  
(Audio signal cable)  
Video  
(Video signal cable)  
Video Monitor  
VCR  
Video Monitor  
VCR  
: Signal Flow  
: Signal Flow  
*1 : Connection is only possible to the TM-A13SU and TM-A13SU-W.  
*2 : Connection is only possible to the TM-A13SU and TM-A13SU-W.  
There is no Y/C terminal on the TM-A13UCV.  
There is no audio terminal on the TM-A13UCV.  
*3 : Connection is only possible to the TM-A13SU and TM-A13SU-W.  
There is no audio terminal on the TM-A13UCV.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Solutions to common problems related to your monitor are described here. If none of the solutions presented here  
solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance.  
Note:  
Audio is only available on the TM-A13SU and TM-A13SU-W. It is not available on the TM-A13UCV.  
Problems  
Points to be checked  
Measures (Remedy)  
Firmly insert the power plug.  
Is the power plug loosened or disconnected?  
No power supply.  
Is the video signal output from the connected  
component?  
Set the connected component correctly.  
No picture with the  
power on.  
Is the input signal selected properly?  
Select the required video signal input with the  
Input select button. (See page 6.)  
Is the video cable disconnected?  
Connect the video signal cable firmly. (See page  
11.)  
No sound.  
Is the audio signal output from the connected  
component?  
Set the connected component correctly.  
(TM-A13SU and  
Is the volume output set to minimum?  
Adjust the speaker volume with the VOLUME/  
SELECT button. (See page 6.)  
TM-A13SU-W only)  
Is the audio cable disconnected?  
Connect the audio signal cable firmly. (See page  
11.)  
Is the monitor close to a device generating a  
strong magnetic field?  
Move the device away from the monitor until the  
picture stabilizes.  
Shaking picture.  
Is the color system selected properly?  
Set the COLOR SYSTEM in the <MENU> screen  
mode to [AUTO] mode. (See page 7.)  
Has the picture control setting (CONTRAST,  
BRIGHT, CHROMA or PHASE) been changed?  
Set each picture control to the standard setting.  
(See page 6.)  
Is the monitor close to a speaker, magnet or any Move the device away from the monitor and turn  
other device generating a strong magnetic field? the monitor’s power off. Wait at least 30 minutes,  
then turn the power on again.  
Are the operation buttons on the front panel  
locked? ( Has CONTROL LOCK function set to  
ON?)  
Set the CONTROL LOCK to OFF in the <SET-  
UP MENU> screen mode. (See pages 8 and 9.)  
The following are not malfunctions:  
When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored. This is due to the  
structure of the cathode ray tube and will be deleted when another image is displayed.  
You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static  
electricity on the CRT and is not harmful.  
The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality  
appears on the screen as well.  
If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to  
mutual interference; it is not a malfunction.  
Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being  
used.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
MODEL  
TM-A13SU / TM-A13SU-W  
TM-A13UCV  
Type  
Color video monitor  
NTSC (3.58), PAL  
Color system  
Picture tube  
13" measured diagonally,  
90° deflection, in-line gun,  
vertical line trio type  
(phosphor stripe pitch 0.64 mm)  
Effective screen size  
Width  
11-1/8" (280.8 mm)  
Height  
Diagonal  
8-3/8" (210.6 mm)  
13-1/4" (335.4 mm)  
H : 15.734 kHz (NTSC), 15.625 kHz (PAL)  
V : 59.94 Hz (NTSC), 50 Hz (PAL)  
Scanning frequency  
Horizontal resolution  
320 TV lines or more (NTSC)  
VIDEO A  
Input terminals  
Composite video: 1 line, BNC connector x 2,  
1 Vp-p, 75 negative sync  
(bridge connection possible, auto termination)  
Composite video: 1 line, BNC connector x 2,  
1 Vp-p, 75 negative sync  
(bridge connection possible, auto termination)  
VIDEO B  
Y/C-separated: 1 line,  
mini-DIN 4-pin connector x 1  
Y: 1.0 Vp-p, 75 Ω  
C: 0.286 Vp-p, 75 (NTSC),  
0.3 Vp-p, 75 (PAL)  
1 line (monaural), RCA pin x 2,  
0.5 V rms, high-impedance  
(bridge connection possible)  
AUDIO A  
AUDIO B  
1 line (monaural), RCA pin x 2,  
0.5 Vrms, high-impedance  
(bridge connection possible)  
1 W (monaural)  
Audio power output  
8 cm round x 1, impedance of 8 Ω  
Built-in speaker  
Operation temperature: 0 – 40 °C (32 – 104 °F)  
Operation humidity: 20 – 80% (non-condensing)  
Environmental conditions  
120V AC, 50/ 60 Hz  
Power requirements  
Power consumption  
Dimensions  
0.87 A (120 V AC)  
0.77 A (120 V AC)  
14-1/2" (368 mm)  
Width  
Height  
Depth  
12-1/4" (310 mm)  
14-3/4" (371.5 mm)  
Weight  
21.2 lbs (9.6 kg)  
20.9 lbs (9.5 kg)  
Accessory  
AC power cord [7.87 ft (2.4 m)] x 1  
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.  
* Dimensions and weight are approximate.  
* E. & O. E. Design and specifications subject to change without notice.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Dimensions  
Unit : Inch (mm)  
< Side View >  
< Front View >  
14-3/4 (371.5)  
14-5/8 (370)  
1/16 (1.3)  
14-1/2 (368)  
4-1/8 (102)  
*
*
11-3/8 (287)  
+
B
A
ON  
OFF  
PHASE CHROMA BRIGHT CONTRAST MENU  
VOLUME/SELECT  
INPUTSELECT  
POWER  
TM-A13SU  
13-1/4 (334) [Front foot]  
11-7/8 (300) [Mid foot]  
11-3/4 (296) [Rear foot]  
3-5/8 (92) 4-7/8 (122.5)  
3/4 (16)  
* Asterisks ( ) are used to indicate front panel  
dimensions.  
(TM-A13SU shown)  
7 Y/C (Mini DIN 4 pin) terminal  
specification  
Pin No.  
Signal  
GND (Y)  
GND (C)  
Y
Y/C IN  
1
2
3
4
4
2
3
1
C
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC PROFESSIONAL PRODUCTS COMPANY  
DIVISION OF US JVC CORP.  
1700 Vallery Road Wayne, NJ07470  
JVC CANADA INC.  
21 Finchdene Square, Scarborough Ontario M1X 1A7  
LCT0332-001B-H  
0299-Tu-V-JMT  
1999 VICTOR COMPANY OF JAPAN, LIMITED  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia DVD Player NS P10DVD11 User Manual
Invacare Mobility Aid 1000 User Manual
IOGear Network Card GICe720S3W6 User Manual
Jenn Air Toaster JTO500 User Manual
JL Audio Stereo Amplifier G1700 User Manual
Kenmore Water Heater 336 User Manual
Keys Fitness Home Gym CM530R User Manual
KitchenAid Cooktop KECC507GAL1 User Manual
KitchenAid Water Dispenser KHWG160PCR1 User Manual
Kramer Electronics Photo Scanner PIP 200xl User Manual