IPSO Washer CHM2097N User Manual
On-Premise  
Laundry  
Planning  
Handbook  
CHM2097N  
IWF Washer-Extractors  
Refer to Installation manual for full instructions.  
5-08-51R3  
October 2011  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Introduction  
Model Identification - IWF Washer-Extractors  
CHM2097N  
Figure 1  
IWF014  
IWF018  
IWF025  
IWF030  
IWF033  
IWF040  
IWF055  
IWF075  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Washer-Extractors  
Specifications and Dimensions - Model IWF014 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
13 lb. (5.9 kg)  
14 lb. (6.5 kg)  
15.87 lb. (7.2 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
20.86 (530)  
11.61 (295)  
2.29 (65)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
40.98 (1041)  
25.98 (660)  
31.37 (797)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
13.97 (355)  
20 (508)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
525 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
0.5 HP/0.37 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
4.2 kW - 6 kW - 9 kW  
Not Applicable  
Not Applicable  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
45.66 X 28.74 X 33.46  
(1160 X 730 X 850)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
384 (174)  
423.28 (192)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
3
 
Washer-Extractors  
Machine Dimensions - Model IWF014 (2-speed)  
8.66 in.  
(220 mm)  
0.2 in.  
(5 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
10.75 in.  
(273 mm)  
1.89 in.  
(48 mm)  
11.3 in. (287 mm)  
1.46 in. (37 mm)  
26.37 in. (670 mm)  
28.66 in (728 mm)  
2.72 in. (69 mm)  
CHM2099N  
CHM2100N  
N  
8.9 in.  
(226 mm)  
1
2
5.94 in. (151 mm)  
3
4
2.95 in. (75 mm)  
5
10  
6
9
7
4.29 in.  
(109 mm)  
8
7.09 in.  
(180 mm)  
6.48 in.  
(164.5 mm)  
2.36 in.  
(60 mm)  
25.98 in. (660 mm)  
CHM2110N  
1
2
3
4
5
Ventilation Soap Dispenser  
Warm Water Connections .75 in.  
Liquid Soap Connections  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
Ventilation Tub  
Electrical Connections  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
10  
Figure 2  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF014 (2-speed)  
ø0.87 in.  
(ø22 mm)  
1.89 in.  
(48 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
CHM2156N  
Figure 3  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF014 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
N/A  
14/2.5  
14/2.5  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
1
10  
10  
10  
10  
6
6
6
6
14/2.5  
14/2.5  
14/2.5  
14/2.5  
N/A  
11.9  
18.9  
N/A  
N/A  
15  
N/A  
16  
1
3x2 kW  
Q
X
2.5  
2.5  
25  
20  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
Alternative Electric Heat Options  
N/A  
14/2.5  
14/2.5  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
N/A  
8.6  
N/A  
10  
N/A  
10  
3x1.4 kW  
3x3 kW  
Q
X
N
P
14  
15  
16  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
17.3  
27.1  
N/A  
N/A  
N/A  
25  
N/A  
N/A  
20  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
14/2.5  
14/2.5  
N/A  
30  
25  
Q
X
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
Table 1  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF018 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
14.33 lb. (6.9 kg)  
16.09 lb. (7.3 kg)  
18.51 lb. (8.4 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
20.86 (530)  
13.58 (345)  
2.57 (73)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
40.98 (1041)  
25.98 (660)  
31.37 (797)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
13.97 (355)  
20 (508)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
525 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
0.5 HP/0.37 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
4.2 kW - 6 kW - 9 kW  
12 kW  
Not Applicable  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
45.66 X 28.74 X 33.46  
(1160 X 730 X 850)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
399.03 (181)  
432.10 (196)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
7
 
Washer-Extractors  
Machine Dimensions - Model IWF018 (2-speed)  
8.66 in.  
(220 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
0.2 in.  
(5 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
9.17 in.  
(233 mm)  
1.89 in.  
(48 mm)  
1.46 in. (37 mm)  
2.72 in. (69 mm)  
12.87 in. (327 mm)  
CHM2099N  
26.37 in. (670 mm)  
28.66 in (728 mm)  
CHM2100N  
8.9 in.  
(226 mm)  
5.94 in. (151 mm)  
1
2
3
2.95 in. (75 mm)  
4
10  
9
8
5
6
4.29 in.  
(109 mm)  
7
7.09 in.  
(180 mm)  
6.48 in.  
(164.5 mm)  
2.36 in.  
(60 mm)  
25.98 in. (660 mm)  
CHM2110N  
1
2
3
4
5
Warm Water Connections .75 in.  
Liquid Soap Connections  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 4  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF018 (2-speed)  
ø0.87 in.  
(ø22 mm)  
1.89 in.  
(48 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
CHM2105N  
Figure 5  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF018 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
N/A  
14/2.5  
14/2.5  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
1
10  
10  
10  
10  
6
6
6
6
14/2.5  
14/2.5  
14/2.5  
14/2.5  
N/A  
11.9  
18.9  
N/A  
N/A  
15  
N/A  
16  
1
3x2 kW  
Q
X
2.5  
2.5  
25  
20  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
Alternative Electric Heat Options  
N/A  
14/2.5  
14/2.5  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
N/A  
8.6  
N/A  
10  
N/A  
10  
3x1.4 kW  
3x3 kW  
3x4 kW  
Q
X
N
P
14  
15  
16  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
17.3  
27.1  
N/A  
19.8  
22.8  
N/A  
N/A  
N/A  
N/A  
25  
N/A  
N/A  
20  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
14/2.5  
14/2.5  
N/A  
30  
25  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
25  
N/A  
20  
14/2.5  
14/2.5  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
30  
25  
Q
X
N/A  
N/A  
N/A  
N/A  
N/A  
200-240 50/60 1/3 2/3+PE  
Table 2  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF025 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
18.95 lb. (8.6 kg)  
20.94 lb. (9.5 kg)  
23.14 lb. (10.5 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
20.86 (530)  
17.32 (440)  
3.35 (95)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
40.98 (1041)  
25.98 (660)  
35.31 (897)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
13.97 (355)  
20 (508)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
525 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
0.5 HP/0.37 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
4.2 kW - 6kW - 9 kW  
12 kW  
Not Applicable  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
45.66 X 28.74 X 37.40  
(1170 X 730 X 950)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
440.92 (200)  
460.76 (209)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
11  
 
Washer-Extractors  
Machine Dimensions - Model IWF025 (2-speed)  
8.66 in.  
(220 mm)  
2.17 in.  
(55 mm)  
0.2 in.  
(5 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
9.17 in.  
(233 mm)  
1.89 in.  
(48 mm)  
1.46 in. (37 mm)  
16.81 in. (427 mm)  
2.72 in. (69 mm)  
30.31 in. (770 mm)  
32.6 in (828 mm)  
CHM2099N  
CHM2100N  
0  
8.9 in.  
(226 mm)  
5.94 in. (151 mm)  
1
2
3
2.95 in. (75 mm)  
4
10  
9
5
6
8
4.29 in.  
(109 mm)  
7
7.09 in.  
(180 mm)  
2.36 in.  
(60 mm)  
6.48 in.  
(164.5 mm)  
25.98 in. (660 mm)  
CHM2110N  
1
2
3
4
5
Warm Water Connections .75 in.  
Liquid Soap Connections  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 6  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF025 (2-speed)  
ø0.87 in.  
(ø22 mm)  
1.89 in.  
(48 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
CHM2158N  
Figure 7  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF025 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
N/A  
14/2.5  
14/2.5  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
1
10  
10  
10  
10  
6
6
6
6
14/2.5  
14/2.5  
14/2.5  
14/2.5  
N/A  
17.3  
27.1  
N/A  
N/A  
25  
N/A  
20  
1
3x3 kW  
Q
X
2.5  
2.5  
30  
25  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
Alternative Electric Heat Options  
N/A  
14/2.5  
14/2.5  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
N/A  
8.6  
N/A  
10  
N/A  
10  
3x1.4 kW  
3x2 kW  
3x4 kW  
Q
X
N
P
14  
15  
16  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
11.9  
18.9  
N/A  
19.8  
22.8  
N/A  
N/A  
N/A  
N/A  
15  
N/A  
N/A  
16  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
14/2.5  
14/2.5  
N/A  
25  
20  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
25  
N/A  
20  
14/2.5  
14/2.5  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
30  
25  
Q
X
N/A  
N/A  
N/A  
N/A  
N/A  
200-240 50/60 1/3 2/3+PE  
Table 3  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Models IWF030 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
26.45 lb. (12 kg)  
29.10 lb. (13.2 kg)  
31.96 lb. (14.5 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
25.59 (650)  
17.74 (400)  
4.66 (132)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
47.40 (1204)  
30.70 (780)  
33.14 (842)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
17.91 (455)  
23.85 (606)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
475 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
1 HP/0.75 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
52.75 X 33.38 X37.40  
(1340 X 848 X 950)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
617.29 (280)  
645.95 (293)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
15  
 
Washer-Extractors  
Machine Dimensions - Model IWF030 (2-speed)  
3.31 in.  
(84 mm)  
8.66 in.  
(220 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
10.24 in.  
(260 mm)  
1.1 in.  
(28 mm)  
1.3 in.  
(33 mm)  
16.14 in. (410 mm)  
CHM2117N  
29.92 in. (760 mm)  
32.12 (816 mm)  
3.23 in.  
(82 mm)  
CHM2118N  
13.07 in.  
(332 mm)  
10.51 in. (267 mm)  
7.95 in. (202 mm)  
4.19 in. (106.5 mm)  
1
2
3
10  
4
5
9
8
4.29 in.  
(109 mm)  
6
8.23 in.  
(209 mm)  
3.31 in.  
(84 mm)  
12.4 in.  
(315 mm)  
CHM2119N  
7
1
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
Ventilation Tub  
Electrical Connections  
6
7
8
9
Steam Connections  
Drain Valve  
Hard Water Connections .75 in.  
Liquid Soap Connections  
Ventilation Soap Dispenser  
2
3
4
5
10  
Figure 8  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF030 (2-speed)  
ø0.87 in.  
(ø22 mm)  
1.3 in.  
(33 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
CHM2159N  
Figure 9  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
17  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF030 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
14/2.5  
14/2.5  
12/4.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
1
10  
10  
10  
10  
6
6
6
6
14/2.5  
14/2.5  
14/2.5  
14/2.5  
19.8  
22.8  
35.3  
N/A  
25  
30  
20  
25  
1
6x2 kW  
Q
X
2.5  
2.5  
40  
40  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
Alternative Electric Heat Options  
14/2.5  
12/2.5  
12/4.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
24.5  
28.2  
43.5  
N/A  
29.2  
33.7  
51.8  
N/A  
30  
40  
25  
32  
3x3 kW  
+
3x2 kW  
Q
X
N
P
40  
50  
200-240 50/60 1/3 2/3+PE  
N/A  
40  
N/A  
32  
12/4.0  
12/4.0  
10/6.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
6x3 kW  
50  
63  
Q
X
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
Table 4  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Anchoring to Metal Base  
Installation  
The machines must be fixed on a metal base which is  
securely anchored on a concrete base. Refer to  
Figure 11.  
Models IWF014, IWF018, IWF025 and  
IWF030 (2-speed)  
CAUTION  
1
2
Ensure that the machine is installed on a  
level floor of sufficient strength and that  
the recommended clearances for  
3
7
inspection and maintenance are provided.  
Never allow the inspection and  
2
maintenance space to be blocked.  
SW020  
3
4
6
Surface  
The machine must be securely fixed on a flat surface  
(metal base, concrete or solid ground). The anchoring  
is to be done on the 4 provided places in the holes on  
the corners of the base. (See Mounting Bolt Hole  
Locations). Refer to Figure 10.  
5
CHM2103N  
CHM2103N  
1
2
Machine Base  
Nut  
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), .625 in. (M16) (Model IWF030)  
Washer  
3
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.625 in. x 2.5 in. (M16x60 mm)  
Bolt  
4
5
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), and .625 in. (M16) (Model IWF030)  
Concrete Base  
9.48 in. (250 mm) (Models IWF014, IWF018  
and IWF025), and 13.77 in. (350 mm)  
(Model IWF030)  
6
7
Metal Base  
1
CHM2102N  
Figure 11  
1
Mounting Bolt Holes  
Figure 10  
The machine must be placed entirely level. For easy  
maintenance it is recommended to keep a minimal  
distance of 23.62 in. (600 mm) between the wall and  
the back of the machine.  
If several machines are placed next to each other, there  
should be a minimal distance of 1.18 in. (30 mm)  
between each machine.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Washer-Extractors  
Directly to Concrete Base  
The machine must be anchored directly to concrete  
base. Refer to Figure 12.  
1
5
2
4
3
CHM2104N  
1
2
3
4
Nut  
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), and .625 (M16) (Model IWF030)  
Washer  
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), and .625 (M16) (Model IWF030)  
Concrete Base  
9.48 in. (250 mm) (Models IWF014, IWF018  
and IWF025), and 13.77 in. (350 mm)  
(Model IWF030)  
5
Machine Base  
Figure 12  
IMPORTANT: Machine bolts should be re-checked  
on a quarterly basis.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
20  
 
Washer-Extractors  
Specifications and Dimensions - Models IWF033 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
28.88 lb. (13.1 kg)  
31.96 lb. (14.5 kg)  
35.49 lb. (16.1 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
26.77 (680)  
17.74 (400)  
5.12 (145)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
47.40 (1204)  
30.70 (780)  
33.14 (842)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
15.35 (390)  
23.22 (590)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
465 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
1.47 HP/1.1 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
52.75 X 33.38 X 36.22  
(1340 X 848 X 920)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
674.61 (306)  
723.11 (328)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
21  
 
Washer-Extractors  
Machine Dimensions - Model IWF033 (2-speed)  
3.31 in.  
(84 mm)  
8.66 in.  
(220 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
10.24 in.  
(260 mm)  
1.3 in.  
(33 mm)  
16.14 in. (410 mm)  
29.92 in. (760 mm)  
1.1 in. (28 mm)  
3.23 in. (82 mm)  
CHM2120N  
32.12 (816 mm)  
CHM2121N  
13.07 in.  
(332 mm)  
10.51 in. (267 mm)  
7.95 in. (202 mm)  
4.17 in. (106 mm)  
1
2
3
10  
4
9
5
8
4.29 in.  
(109 mm)  
6
3.31 in.  
(84 mm)  
8.23 in.  
(209 mm)  
8.86 in.  
(225 mm)  
CHM2122N  
7
1
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
Ventilation Tub  
Electrical Connections  
6
7
8
9
10  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Liquid Soap Connections  
Ventilation Soap Dispenser  
2
3
4
5
Figure 13  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF033 (2-speed)  
ø0.87 in.  
(ø22 mm)  
1.3 in.  
(33 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
CHM2160N  
Figure 14  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
23  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF033 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
4
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
30  
38  
40  
50  
40  
50  
3+N+PE 12  
6x3 kW  
Q
X
3+PE  
12  
12  
57  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
26  
34  
30  
40  
30  
40  
3x3 kW  
+
3x2 kW  
Q
X
N
P
50  
60  
60  
200-240 50/60 1/3 2/3+PE  
N/A  
34  
N/A  
40  
N/A  
40  
8/10.0  
6/16.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3x3 kW  
+
3x4 kW  
60  
60  
53  
N/A  
N/A  
30  
N/A  
N/A  
30  
N/A  
N/A  
21  
Q
X
N
P
N/A  
200-240 50/60 1/3 2/3+PE  
10/6.0  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
30  
6x2 kW  
6x4 kW  
50  
50  
42  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
39  
N/A  
50  
N/A  
50  
8/10.0  
6/16.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
60  
60  
47  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 5  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF040 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
36.15 lb. (16.4 kg)  
39.90 lb. (18.1 kg)  
44.31 lb. (20.1 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
26.77 (680)  
19.68 (500)  
6.39 (181)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
47.40 (1204)  
30.70 (780)  
37.08 (942)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
15.35 (390)  
23.22 (590)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
465 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
1.47 HP/1.1 kW  
2 (51) or 3 (76)  
.75 (19)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
52.75 X 33.38 X 40.15  
(1340 X 848 X 1020)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
707.68 (321)  
758.39 (344)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
25  
 
Washer-Extractors  
Machine Dimensions - Model IWF040 (2-speed)  
8.66 in.  
(220 mm)  
3.31 in.  
(84 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
10.24 in.  
(260 mm)  
1.3 in.  
(33 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
1.1 in.  
(28 mm)  
20.08 in. (510 mm)  
33.86 in. (860 mm)  
36.07 in. (916 mm)  
3.23 in.  
(82 mm)  
CHM2120N  
CHM2121N  
13.07 in.  
(332 mm)  
10.51 in. (267 mm)  
7.95 in. (202 mm)  
4.17 in. (106 mm)  
1
2
3
4
5
10  
6
9
4.29 in.  
(109 mm)  
7
8.86 in.  
(225 mm)  
8.23 in.  
(209 mm)  
3.31 in.  
(84 mm)  
CHM2122N  
8
1
2
3
4
5
Warm Water Connections .75 in.  
Hard Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Liquid Soap Connections  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 15  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF040 (2-speed)  
1.1 in.  
(28 mm)  
ø0.87 in.  
(ø22 mm)  
1.3 in.  
(33 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
CHM2161N  
Figure 16  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
27  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF040 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
4
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
30  
38  
40  
50  
40  
50  
3+N+PE 12  
6x3 kW  
Q
X
3+PE  
12  
12  
57  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
6/16.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
26  
34  
30  
40  
30  
40  
3x3 kW  
+
3x2 kW  
Q
X
N
P
50  
60  
60  
200-240 50/60 1/3 2/3+PE  
50  
60  
60  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
34  
40  
40  
3x3 kW  
+
3x4 kW  
60  
60  
53  
N/A  
N/A  
30  
N/A  
N/A  
30  
N/A  
N/A  
21  
Q
X
N
P
N/A  
200-240 50/60 1/3 2/3+PE  
10/6.0  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
30  
6x2 kW  
6x4 kW  
50  
50  
42  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
39  
N/A  
50  
N/A  
50  
8/10.0  
6/16.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
60  
60  
47  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 6  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF055 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
46.95 lb. (21.3 kg)  
51.58 lb. (23.4 kg)  
57.32 lb. (26 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
29.52 (750)  
20.86 (530)  
8.26 (234)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
54.17 (1376)  
33.85 (860)  
41.25 (1048)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
19.68 (500)  
27.55 (700)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
445 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
2 HP/1.5 kW  
3 (76)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.5 (13)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
61.41 X 38.58 X 44.88  
(1560 X 980 X 1140)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
844.37 (383)  
954.60 (433)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
29  
 
Washer-Extractors  
Machine Dimensions - Model IWF055 (2-speed)  
9.49 in.  
(241 mm)  
1.93 in.  
(49 mm)  
20.39 in.  
(518 mm)  
354 in.  
(90 mm)  
11.1 in.  
(282 mm)  
1.97 in.  
(50 mm)  
3.54 in.  
(90 mm)  
1.97 in.  
(50 mm)  
26.77 in. (680 mm)  
33.86 in. (860 mm)  
35.43 in. (900 mm)  
36.5 in. (927 mm)  
38.76 in. (984.5 mm)  
CHM2126N  
0.55 in.  
(14 mm)  
CHM2127N  
12.64 in.  
(321 mm)  
1
9.49 in. (241 mm)  
2
3
4
9.29 in. (236 mm)  
5.94 in. (151 mm)  
5
6
10  
7
7.88 in.  
(200.5 mm)  
CHM2128N  
9
8
1
2
3
4
5
Hard Water Connections .75 in.  
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Liquid Soap Connections  
Main Switch  
6
7
8
9
10  
Ventilation Tub  
Electrical Connections  
Drain Valve  
Steam Connections  
Ventilation Soap Dispenser  
Figure 17  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF055 (2-speed)  
1.97 in.  
(50 mm)  
ø1.06 in.  
(ø27 mm)  
1.97 in.  
(50 mm)  
3.54 in.  
3.54 in.  
(90 mm)  
26.77 in. (680 mm)  
(90 mm)  
33.86 in. (860 mm)  
CHM2162N  
Figure 18  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
31  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF055 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
6
15  
20  
20  
20  
10  
20  
20  
20  
14/2.5  
12/4.0  
12/4.0  
12/4.0  
32  
43  
40  
50  
40  
50  
3+N+PE 16  
6x3 kW  
Q
X
3+PE  
16  
16  
62  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
27  
40  
30  
50  
32  
50  
3x3 kW  
+
3x2 kW  
Q
X
N
P
56  
60  
60  
N/A  
40  
N/A  
40  
N/A  
36  
200-240 50/60 1/3 2/3+PE  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3x3 kW  
+
3x4 kW  
50  
50  
48  
N/A  
N/A  
30  
N/A  
N/A  
25  
N/A  
N/A  
23  
Q
X
N
P
N/A  
200-240 50/60 1/3 2/3+PE  
10/6.0  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
35  
6x2 kW  
6x4 kW  
50  
50  
48  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
40  
N/A  
50  
N/A  
50  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
60  
60  
53  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 7  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF075 (2-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
61.72 lb. (28 kg)  
67.02 lb. (30.4 kg)  
73.41 lb. (33.3 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
33.46 (850)  
21.14 (537)  
10.73 (304)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
55.55 (1411)  
38.97 (990)  
46.85 (1190)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
19.68 (500)  
27.55 (700)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
415 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
82  
2.49 HP/2.2 kW  
3 (76)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.5 (13)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
61.41 X 44.09 X 51.18  
(1560 X 1120 X 1300)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
1177.26 (534)  
1287.49 (584)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
33  
 
Washer-Extractors  
Machine Dimensions - IWF075 (2-speed)  
9.76 in.  
(248 mm)  
2.81 in.  
(71.5 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
33.46 in. (850 mm)  
38.98 in. (990 mm)  
13.66 in.  
(347 mm)  
22.44 in.  
(570 mm)  
2.64 in.  
(67 mm)  
1.81 in.  
(46 mm)  
CHM2153N  
40.55 in. (1030 mm)  
41.54 in. (1055 mm)  
43.8 in. (1113 mm)  
0.26 in.  
(7 mm)  
4  
19.21 in.  
(488 mm)  
CHM2154N  
14.47 in. (368 mm)  
9.72 in. (247 mm)  
7.36 in. (187 mm)  
1
2
3
4
10  
5
9
6
10.55 in.  
(268 mm)  
8
CHM2131N  
7
1
2
3
4
5
Hard Water Connections .75 in.  
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Liquid Soap Connections  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 19  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF075 (2-speed)  
2.64 in.  
(67 mm)  
ø1.06 in.  
(ø27 mm)  
1.81 in.  
(46 mm)  
33.46 in.  
(850 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
38.98 in.  
(990 mm)  
CHM2163N  
Figure 20  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF075 (2-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
4/25.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
6
15  
20  
20  
20  
10  
20  
20  
20  
14/2.5  
12/4.0  
12/4.0  
12/4.0  
32  
43  
50  
70  
50  
70  
6x4 kW  
6x3 kW  
3+N+PE 16  
Q
X
3+PE  
16  
16  
60  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
36  
48  
50  
70  
50  
70  
3x3 kW  
+
3x4 kW  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 8  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Anchoring to Metal Base  
Installation  
The machines must be fixed on a metal base which is  
securely anchored on a concrete base. Refer to  
Figure 22.  
Models IWF033, IWF040, IWF055 and  
IWF075 (2-speed)  
CAUTION  
1
2
Ensure that the machine is installed on a  
level floor of sufficient strength and that  
the recommended clearances for  
3
7
inspection and maintenance are provided.  
Never allow the inspection and  
2
maintenance space to be blocked.  
3
SW020  
4
6
Surface  
The machine must be securely fixed on a flat surface  
(metal base, concrete or solid ground). The anchoring  
is to be done on the 4 provided places in the holes on  
the corner of the base. (See Mounting Bolt Hole  
Locations). Refer to Figure 21.  
5
CHM2103N  
CHM2103N  
1
2
Machine Base  
Nut  
.625 in. (M16)  
3
Washer  
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.625 in. x 2.5 in. (M16x60 mm)  
Bolt  
4
5
6
.625 in. (M16)  
Concrete Base  
15.74 in. (400 mm) (Models IWF033 and  
IWF040), and 21.65 in. (550 mm)  
(Model IWF055), and 27.55 in. (700 mm)  
(Model IWF075)  
7
Metal Base  
1
CHM2102N  
Figure 22  
1
Mounting Bolt Holes  
Machine bolts should be re-checked on a quarterly  
basis.  
Figure 21  
The machine must be placed entirely level. For easy  
maintenance it is recommended to keep a minimal  
distance of 23.62 in. (600 mm) between the wall and  
the back of the machine.  
If several machines are placed next to each other, there  
should be a minimal distance of 1.18 in. (30 mm)  
between each machine.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
37  
       
Washer-Extractors  
Anchoring to Concrete Base  
The machine must be anchored directly to concrete  
base. Refer to Figure 23.  
1
5
2
4
3
CHM2104N  
1
2
Nut  
.625 in. (M16)  
Washer  
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.625 in. (M16)  
Concrete Base  
3
4
15.74 in. (400 mm) (Models IWF033 and  
IWF040), and 21.65 in. (550 mm)  
(Model IWF055), and 27.55 in. (700 mm)  
(Model IWF075)  
5
Machine Base  
Figure 23  
IMPORTANT: Machine bolt should be re-checked  
on a quarterly basis.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
38  
 
Washer-Extractors  
Specifications and Dimensions - Models IWF0014 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
13 lb. (5.9 kg)  
14 lb. (6.5 kg)  
15.87 lb. (7.2 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
20.86 (530)  
11.61 (295)  
2.29 (65)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
40.98 (1041)  
25.98 (660)  
31.37 (797)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
13.97 (355)  
20 (508)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
700 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
145  
0.73 HP/0.55 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
4.2 kW - 6 kW - 9 kW  
Not Applicable  
Not Applicable  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
45.66 X 28.74 X 33.46  
(1160 X 730 X 850)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
384 (174)  
423.28 (192)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
39  
 
Washer-Extractors  
Machine Dimensions - Model IWF014 (M-speed)  
8.66 in.  
(220 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
0.2 in.  
(5 mm)  
1.89 in.  
(48 mm)  
10.75 in.  
(273 mm)  
CHM2099N  
1.46 in. (37 mm)  
2.72 in. (69 mm)  
11.3 in. (287 mm)  
8.9 in.  
(226 mm)  
26.37 in. (670 mm)  
28.66 in (728 mm)  
5.94 in. (151 mm)  
1
2
2.95 in. (75 mm)  
3
0  
CHM2100N  
10  
9
4
5
6
4.29 in.  
(109 mm)  
8
7
2.36 in.  
6.48 in.  
7.09 in.  
(60 mm)  
(164.5 mm)  
(180 mm)  
25.98 in. (660 mm)  
CHM2101N  
1
2
3
4
5
Warm Water Connections .75 in.  
Liquid Soap Connections  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 24  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF014 (M-speed)  
1.46 in.  
(37 mm)  
ø0.87 in.  
(ø22 mm)  
1.89 in.  
(48 mm)  
2.17 in.  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
(55 mm)  
25.98 in. (660 mm)  
CHM2164N  
Figure 25  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF014 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
N/A  
12/4.0  
10/6.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3
7
7
7
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
N/A  
16  
N/A  
20  
N/A  
20  
3x2 kW  
Q
X
23  
30  
32  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
N/A  
14/2.5  
12/4.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
N/A  
13  
N/A  
15  
N/A  
16  
3x1.4 kW  
3x3 kW  
Q
X
N
P
18  
20  
20  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
21  
N/A  
N/A  
30  
N/A  
N/A  
32  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
10/6.0  
8/10.0  
N/A  
40  
40  
30  
Q
X
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Table 9  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF018 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
14.33 lb. (6.9 kg)  
16.09 lb. (7.3 kg)  
18.51 lb. (8.4 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
20.86 (530)  
13.58 (345)  
2.57 (73)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
40.98 (1041)  
25.98 (660)  
31.37 (797)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
13.97 (355)  
20 (508)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
700 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
145  
0.73 HP/0.55 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
4.2 kW - 6 kW - 9 kW  
12 kW  
Not Applicable  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
45.66 X 28.74 X 33.46  
(1160 X 730 X 850)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
399.03 (181)  
432.10 (196)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
43  
 
Washer-Extractors  
Machine Dimensions - Model IWF018 (M-speed)  
8.66 in.  
(220 mm)  
0.2 in.  
(5 mm)  
1.46 in.  
(37 mm)  
2.72 in.  
(69 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
1.89 in.  
(48 mm)  
9.17 in.  
(233 mm)  
12.87 in. (327 mm)  
26.37 in. (670 mm)  
28.66 in (728 mm)  
CHM2135N  
8.9 in.  
(226 mm)  
CHM2136N  
N  
5.94 in. (151 mm)  
2.95 in. (75 mm)  
1
2
3
10  
9
4
8
5
4.29 in.  
(109 mm)  
6
7
7.09 in.  
(180 mm)  
2.36 in.  
(60 mm)  
6.48 in.  
(164.5 mm)  
25.98 in. (660 mm)  
CHM2137N  
1
Warm Water Connections .75 in.  
Liquid Soap Connections  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Ventilation Soap Dispenser  
2
3
4
5
Ventilation Tub  
Figure 26  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF018 (M-speed)  
1.46 in.  
(37 mm)  
ø0.87 in.  
(ø22 mm)  
1.89 in.  
(48 mm)  
2.17 in.  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
(55 mm)  
25.98 in. (660 mm)  
CHM2164N  
Figure 27  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF018 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
N/A  
12/4.0  
10/6.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3
7
7
7
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
N/A  
16  
N/A  
20  
N/A  
20  
3x2 kW  
Q
X
23  
30  
32  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
N/A  
14/2.5  
12/4.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
N/A  
13  
N/A  
15  
N/A  
16  
3x1.4 kW  
3x3 kW  
3x4 kW  
Q
X
N
P
18  
20  
20  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
21  
N/A  
N/A  
30  
N/A  
N/A  
32  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
10/6.0  
8/10.0  
N/A  
40  
40  
30  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
20  
N/A  
30  
N/A  
25  
10/6.0  
10/6.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
30  
30  
24  
Q
X
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
200-240 50/60 1/3 2/3+PE  
Table 10  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF025 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
18.95 lb. (8.6 kg)  
20.94 lb. (9.5 kg)  
23.14 lb. (10.5 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
20.86 (530)  
17.32 (440)  
3.35 (95)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
40.98 (1041)  
25.98 (660)  
35.31 (897)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
13.97 (355)  
20 (508)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
700 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
145  
0.73 HP/0.55 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
4.2 kW - 6kW - 9 kW  
12 kW  
Not Applicable  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
45.66 X 28.74 X 37.40  
(1170 X 730 X 950)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
440.92 (200)  
460.76 (209)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
47  
 
Washer-Extractors  
Machine Dimensions - Model IWF025 (M-speed)  
8.66 in.  
(220 mm)  
2.17 in.  
(55 mm)  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
25.98 in. (660 mm)  
0.2 in.  
(5 mm)  
1.89 in.  
(48 mm)  
9.17 in.  
(233 mm)  
CHM2099N  
1.46 in. (37 mm)  
2.72 in. (69 mm)  
16.81 in. (427 mm)  
8.9 in.  
(226 mm)  
30.31 in. (770 mm)  
32.6 in (828 mm)  
5.94 in. (151 mm)  
1
2
2.95 in. (75 mm)  
3
0  
CHM2100N  
10  
9
4
5
6
4.29 in.  
(109 mm)  
8
7
2.36 in.  
6.48 in.  
7.09 in.  
(60 mm)  
(164.5 mm)  
(180 mm)  
25.98 in. (660 mm)  
CHM2101N  
1
2
3
4
5
Warm Water Connections .75 in.  
Liquid Soap Connections  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 28  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF025 (M-speed)  
1.46 in.  
(37 mm)  
ø0.87 in.  
(ø22 mm)  
1.89 in.  
(48 mm)  
2.17 in.  
2.17 in.  
(55 mm)  
21.65 in. (550 mm)  
(55 mm)  
25.98 in. (660 mm)  
CHM2166N  
Figure 29  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF025 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
N/A  
10/6.0  
8/10.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3
7
7
7
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
N/A  
21  
N/A  
30  
N/A  
32  
3x3 kW  
Q
X
30  
40  
40  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
N/A  
14/2.5  
12/4.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
N/A  
13  
N/A  
15  
N/A  
16  
3x1.4 kW  
3x2 kW  
3x4 kW  
Q
X
N
P
18  
20  
20  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
16  
N/A  
N/A  
20  
N/A  
N/A  
20  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
12/4.0  
10/6.0  
N/A  
30  
32  
23  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
20  
N/A  
30  
N/A  
25  
10/6.0  
10/6.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
30  
30  
24  
Q
X
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
200-240 50/60 1/3 2/3+PE  
Table 11  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Models IWF030 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
26.45 lb. (12 kg)  
29.10 lb. (13.2 kg)  
31.96 lb. (14.5 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
25.59 (650)  
17.74 (400)  
4.66 (132)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
47.40 (1204)  
30.70 (780)  
33.14 (842)  
Front Loading  
Door opening size, in. (mm)  
11.81 (300)  
17.91 (455)  
23.85 (606)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
632 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
145  
1.47 HP/1.10 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
Not Applicable  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
52.75 X 33.38 X37.40  
(1340 X 848 X 950)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
617.29 (280)  
645.95 (293)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
51  
 
Washer-Extractors  
Machine Dimensions - Model IWF030 (M-speed)  
3.31 in.  
(84 mm)  
8.66 in.  
(220 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
10.24 in.  
(260 mm)  
1.1 in.  
(28 mm)  
1.3 in.  
(33 mm)  
16.14 in. (410 mm)  
CHM2117N  
29.92 in. (760 mm)  
32.12 (816 mm)  
3.23 in.  
(82 mm)  
CHM2118N  
13.07 in.  
(332 mm)  
10.51 in. (267 mm)  
7.95 in. (202 mm)  
4.19 in. (106.5 mm)  
1
2
3
10  
4
5
9
8
4.29 in.  
(109 mm)  
6
8.23 in.  
(209 mm)  
3.31 in.  
(84 mm)  
12.4 in.  
(315 mm)  
CHM2119N  
7
1
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
Ventilation Tub  
Electrical Connections  
6
7
8
9
Steam Connections  
Drain Valve  
Hard Water Connections .75 in.  
Liquid Soap Connections  
Ventilation Soap Dispenser  
2
3
4
5
10  
Figure 30  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF030 (M-speed)  
1.1 in.  
(28 mm)  
ø0.87 in.  
(ø22 mm)  
1.3 in.  
(33 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
25.2 in. (640 mm)  
(70 mm)  
30.71 in. (780 mm)  
CHM2167N  
Figure 31  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF030 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
10/6.0  
8/10.0  
8/10.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
4
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
21  
30  
30  
40  
30  
40  
3+N+PE 12  
6x2 kW  
Q
X
3+PE  
12  
12  
42  
50  
50  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
26  
34  
30  
40  
30  
40  
3x3 kW  
+
3x2 kW  
Q
X
N
P
50  
60  
60  
200-240 50/60 1/3 2/3+PE  
N/A  
30  
N/A  
40  
N/A  
40  
8/10.0  
8/10.0  
4/25.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
50  
50  
38  
6x3 kW  
70  
70  
57  
Q
X
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Table 12  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Anchoring to Metal Base  
Installation  
The machines must be fixed on a metal base which is  
securely anchored on a concrete base. Refer to  
Figure 33.  
Models IWF014, IWF018, IWF025 and  
IWF030 (M-speed)  
CAUTION  
Ensure that the machine is installed on a  
level floor of sufficient strength and that  
the recommended clearances for  
1
2
3
7
inspection and maintenance are provided.  
Never allow the inspection and  
2
3
maintenance space to be blocked.  
SW020  
4
6
Surface  
The machine must be securely fixed on a flat surface  
(metal base, concrete or solid ground). The anchoring  
is to be done on the 6 provided places in the holes on  
the corners of the base. (See Mounting Bolt Hole  
Locations). Refer to Figure 32.  
5
CHM2103N  
CHM2103N  
1
2
Machine Base  
Nut  
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), .625 in. (M16) (Model IWF030)  
Washer  
3
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.625 in. x 2.5 in. (M16x60 mm)  
Bolt  
4
5
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), and .625 in. (M16) (Model IWF030)  
Concrete Base  
9.48 in. (250 mm) (Models IWF014, IWF018  
and IWF025), and 13.77 in. (350 mm)  
(Model IWF030)  
6
7
Metal Base  
1
CHM2102N  
Figure 33  
1
Mounting Bolt Holes  
Figure 32  
The machine must be placed entirely level. For easy  
maintenance it is recommended to keep a minimal  
distance of 23.62 in. (600 mm) between the wall and  
the back of the machine.  
If several machines are placed next to each other, there  
should be a minimal distance of 1.18 in. (30 mm)  
between each machine.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Washer-Extractors  
Directly to Concrete Base  
The machine must be anchored directly to concrete  
base. Refer to Figure 12.  
1
5
2
4
3
CHM2104N  
1
2
3
4
Nut  
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), and .625 (M16) (Model IWF030)  
Washer  
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.5 in. (M12) (Models IWF014, IWF018 and  
IWF025), and .625 (M16) (IWF030)  
Concrete Base  
9.48 in. (250 mm) (Models IWF014, IWF018  
and IWF025), and 13.77 in. (350 mm) (Model  
IWF030)  
5
Machine Base  
Figure 34  
IMPORTANT: Machine bolts should be re-checked  
on a quarterly basis.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
56  
Washer-Extractors  
Specifications and Dimensions - Models IWF033 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
28.88 lb. (13.1 kg)  
31.96 lb. (14.5 kg)  
35.49 lb. (16.1 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
26.77 (680)  
17.74 (400)  
5.12 (145)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
47.40 (1204)  
30.70 (780)  
33.14 (842)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
15.35 (390)  
23.22 (590)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
659 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
165  
2 HP/1.5 kW  
2 (51)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
52.75 X 33.38 X 36.22  
(1340 X 848 X 920)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
674.61 (306)  
723.11 (328)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
57  
 
Washer-Extractors  
Machine Dimensions - Model IWF033 (M-speed)  
8.66 in.  
3.31 in.  
(220 mm)  
(84 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
1.3 in.  
(33 mm)  
10.24 in.  
(260 mm)  
1.1 in. (28 mm)  
3.23 in. (82 mm)  
16.14 in. (410 mm)  
29.92 in. (760 mm)  
32.12 (816 mm)  
CHM2144N  
13.07 in.  
(332 mm)  
CHM2145N  
5  
10.51 in. (267 mm)  
1
7.95 in. (202 mm)  
4.17 in. (106 mm)  
2
3
10  
9
4
5
8
8.23 in.  
8.86 in.  
(209 mm)  
(225 mm)  
6
CHM2146N  
7
1
2
3
4
5
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
Ventilation Tub  
Electrical Connections  
6
7
8
9
10  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Liquid Soap Connections  
Ventilation Soap Dispenser  
Figure 35  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF033 (M-speed)  
1.1 in.  
(28 mm)  
ø0.87 in.  
(ø22 mm)  
1.3 in.  
(33 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
25.2 in. (640 mm)  
(70 mm)  
30.71 in. (780 mm)  
CHM2168N  
Figure 36  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF033 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
4
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
30  
38  
40  
50  
40  
50  
3+N+PE 12  
6x3 kW  
Q
X
3+PE  
12  
12  
57  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
26  
34  
30  
40  
30  
40  
3x3 kW  
+
3x2 kW  
Q
X
N
P
50  
60  
60  
200-240 50/60 1/3 2/3+PE  
N/A  
34  
N/A  
40  
N/A  
40  
8/10.0  
6/16.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3x3 kW  
+
3x4 kW  
60  
60  
53  
N/A  
N/A  
30  
N/A  
N/A  
30  
N/A  
N/A  
21  
Q
X
N
P
N/A  
200-240 50/60 1/3 2/3+PE  
10/6.0  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
30  
6x2 kW  
6x4 kW  
50  
50  
42  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
39  
N/A  
50  
N/A  
50  
8/10.0  
6/16.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
60  
60  
47  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 13  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF040 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
36.15 lb. (16.4 kg)  
39.90 lb. (18.1 kg)  
44.31 lb. (20.1 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
26.77 (680)  
19.68 (500)  
6.39 (181)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
47.40 (1204)  
30.70 (780)  
37.08 (942)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
15.35 (390)  
23.22 (590)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
659 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
165  
2 HP/1.5 kW  
2 (51) or 3 (76)  
.75 (19)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.38 (10)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
52.75 X 33.38 X 40.15  
(1340 X 848 X 1020)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
707.68 (321)  
758.39 (344)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
61  
 
Washer-Extractors  
Machine Dimensions - Model IWF040 (M-speed)  
8.66 in.  
3.31 in.  
(220 mm)  
(84 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in. (640 mm)  
30.71 in. (780 mm)  
1.3 in.  
(33 mm)  
10.24 in.  
(260 mm)  
1.1 in. (28 mm)  
3.23 in. (82 mm)  
20.08 in. (510 mm)  
33.86 in. (860.1 mm)  
36.07 (916.1 mm)  
CHM2144N  
13.07 in.  
(332 mm)  
CHM2145N  
5  
10.51 in. (267 mm)  
1
7.95 in. (202 mm)  
4.17 in. (106 mm)  
2
3
10  
9
4
5
8
8.23 in.  
8.86 in.  
(209 mm)  
(225 mm)  
CHM2146N  
6
7
1
2
3
4
5
Warm Water Connection .75 in.  
Soft Water Connections .75 in.  
Main Switch  
Ventilation Tub  
Electrical Connections  
6
7
8
9
10  
Drain Valve  
Steam Connections  
Hard Water Connections .75 in.  
Liquid Soap Connections  
Ventilation Soap Dispenser  
Figure 37  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF040 (M-speed)  
1.1 in.  
(28 mm)  
ø0.87 in.  
(ø22 mm)  
1.3 in.  
(33 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
25.2 in.  
(640 mm)  
30.71 in.  
(780 mm)  
CHM2169N  
Figure 38  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF040 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
4
10  
15  
15  
15  
10  
16  
16  
16  
14/2.5  
14/2.5  
14/2.5  
14/2.5  
30  
38  
40  
50  
40  
50  
3+N+PE 12  
6x3 kW  
Q
X
3+PE  
12  
12  
57  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
6/16.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
26  
34  
30  
40  
30  
40  
3x3 kW  
+
3x2 kW  
Q
X
N
P
50  
60  
60  
200-240 50/60 1/3 2/3+PE  
50  
60  
60  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
34  
40  
40  
3x3 kW  
+
3x4 kW  
60  
60  
53  
N/A  
N/A  
30  
N/A  
N/A  
30  
N/A  
N/A  
21  
Q
X
N
P
N/A  
200-240 50/60 1/3 2/3+PE  
10/6.0  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
30  
6x2 kW  
6x4 kW  
50  
50  
42  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
39  
N/A  
50  
N/A  
50  
8/10.0  
6/16.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
60  
60  
47  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 14  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF055 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
46.95 lb. (21.3 kg)  
51.58 lb. (23.4 kg)  
57.32 lb. (26 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
29.52 (750)  
20.86 (530)  
8.26 (234)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
54.17 (1376)  
33.85 (860)  
41.25 (1048)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
19.68 (500)  
27.55 (700)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
628 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
165  
2.6 HP/2.2 kW  
3 (76)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.5 (13)  
Electrical Heating (230/400 V)  
Electrical Heating (400V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
61.41 X 38.58 X 44.88  
(1560 X 980 X 1140)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
844.37 (383)  
954.60 (433)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
65  
 
Washer-Extractors  
Machine Dimensions - Model IWF055 (M-speed)  
9.49 in.  
(241 mm)  
1.93 in.  
(49 mm)  
1.97 in.  
(50 mm)  
20.39 in. (518 mm)  
11.1 in. (282 mm)  
3.54 in.  
3.54 in.  
(90 mm)  
26.77 in. (680 mm)  
1.97 in.  
(50 mm)  
(90 mm)  
CHM2150N  
33.86 in. (860 mm)  
35.43 in. (900 mm)  
36.5 in. (927 mm)  
12.64 in.  
(321 mm)  
0.55 in.  
(14 mm)  
38.76 in. (984.5 mm)  
CHM2151N  
9.49 in. (241 mm)  
9.29 in. (236 mm)  
1
5.94 in. (151 mm)  
2
10  
3
4
9
8
4.53 in.  
(115 mm)  
5
6
7.88 in.  
3.62 in.  
7
(200 mm)  
(92 mm)  
CHM2152N  
CHM2152N  
1
2
3
4
5
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch.  
Ventilation Tub  
Electrical Connections  
6
7
8
9
10  
Drain Valve  
Steam Connections  
Liquid Soap Connections  
Hard Water Connections .75 in.  
Ventilation Soap Dispenser  
Figure 39  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF055 (M-speed)  
1.97 in.  
50 mm)  
ø1.06 in.  
(ø27 mm)  
1.97 in.  
(50 mm)  
3.54 in.  
(90 mm)  
3.54 in.  
26.77 in. (680 mm)  
(90 mm)  
33.86 in. (860 mm)  
CHM2170N  
Figure 40  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF055 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
6
15  
20  
20  
20  
10  
20  
20  
20  
14/2.5  
12/4.0  
12/4.0  
12/4.0  
32  
43  
40  
50  
40  
50  
3+N+PE 16  
6x3 kW  
Q
X
3+PE  
16  
16  
62  
70  
70  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
10/6.0  
8/10.0  
6/16.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
27  
40  
30  
50  
32  
50  
3x3 kW  
+
3x2 kW  
Q
X
N
P
56  
60  
60  
N/A  
40  
N/A  
40  
N/A  
36  
200-240 50/60 1/3 2/3+PE  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
3x3 kW  
+
3x4 kW  
50  
50  
48  
N/A  
N/A  
30  
N/A  
N/A  
25  
N/A  
N/A  
23  
Q
X
N
P
N/A  
200-240 50/60 1/3 2/3+PE  
10/6.0  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
40  
40  
35  
6x2 kW  
6x4 kW  
50  
50  
48  
Q
X
N
P
200-240 50/60 1/3 2/3+PE  
N/A  
40  
N/A  
50  
N/A  
50  
8/10.0  
8/10.0  
N/A  
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
60  
60  
53  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 15  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Specifications and Dimensions - Model IWF075 (M-speed)  
Capacity (dry weight) Ratio (kg/l)  
1:11  
1:10  
1:9  
61.72 lb. (28 kg)  
67.02 lb. (30.4 kg)  
73.41 lb. (33.3 kg)  
Cylinder  
Cylinder diameter, in. (mm)  
Cylinder depth, in. (mm)  
33.46 (850)  
21.14 (537)  
10.73 (304)  
3
Cylinder volume, ft. (l)  
Cabinet  
Overall height, in. (mm)  
Overall width, in. (mm)  
Overall depth, in. (mm)  
55.55 (1411)  
38.97 (990)  
46.85 (1190)  
Front Loading  
Door opening size, in. (mm)  
15.74 (400)  
19.68 (500)  
27.55 (700)  
Height of door bottom above floor, in (mm)  
Height of door center above floor, in (mm)  
Speed  
Wash  
10-50 tr/min - RPM  
85 tr/min - RPM  
590 tr/min - RPM  
Distribution  
Spin  
G-factor  
Spin  
165  
4.02 HP/3 kW  
3 (76)  
Motor (3 phase), 4p, 1470 tr/min  
Drain Valve, in. (mm)  
.75 (19)  
Water Supply (hard, soft, warm water), in. (mm)  
Direct Steam Heating  
Steam inlet connection size, in. (mm)  
Electrical  
.5 (13)  
Electrical Heating (230/400 V)  
Electrical Heating (400 V)  
Steam  
12 kW - 15 kW - 18 kW  
21 kW - 24 kW  
Not Applicable  
Warm Water (without additional heating)  
Warm Water (with additional heating)  
Not Applicable  
Not Applicable  
61.41 X 44.09 X 51.18  
(1560 X 1120 X 1300)  
Packing Dimensions (height X width X depth), in. (mm)  
Weight  
Net weight, lb. (kg)  
Gross weight, lb. (kg)  
1177.26 (534)  
1287.49 (584)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
69  
 
Washer-Extractors  
Machine Dimensions - IWF075 (M-speed)  
9.76 in.  
(248 mm)  
2.81 in.  
(71.5 mm)  
2.76 in.  
(70 mm)  
2.76 in.  
(70 mm)  
33.46 in. (850 mm)  
38.98 in. (990 mm)  
13.66 in.  
(347 mm)  
1.81 in.  
(46 mm)  
2.64 in.  
(67 mm)  
22.44 in. (570 mm)  
40.55 in. (1030 mm)  
41.54 in. (1055 mm)  
43.8 in. (1113 mm)  
CHM2153N  
0.26 in.  
(7 mm)  
19.21 in.  
5  
(488 mm)  
CHM2154N  
14.47 in. (368 mm)  
9.72 in. (247 mm)  
7.36 in. (187 mm)  
1
2
3
4
10  
5
9
6
40.3 in.  
(1024 mm)  
8
10.55 in.  
(268 mm)  
10.39 in.  
(264 mm)  
7
CHM2155N  
1
2
3
4
5
Hard Water Connections .75 in.  
Warm Water Connections .75 in.  
Soft Water Connections .75 in.  
Main Switch  
6
7
8
9
10  
Electrical Connections  
Drain Valve  
Steam Connections  
Liquid Soap Connections  
Ventilation Soap Dispenser  
Ventilation Tub  
Figure 41  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Mounting Bolt Hole Locations - Model IWF075 (M-speed)  
2.64 in.  
(67 mm)  
ø1.06 in.  
(ø27 mm)  
1.81 in.  
(46 mm)  
2.76 in.  
(70 mm)  
33.46 in.  
(850 mm)  
2.76 in.  
(70 mm)  
38.98 in.  
(990 mm)  
CHM2171N  
Figure 42  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
WARNING  
Only trained personnel should perform this  
procedure. Use caution while servicing  
machines with covers removed and power  
applied.  
W700  
Electrical Installation Requirements - Model IWF075 (M-speed)  
Boiler Fed/Steam Heat  
Electric Heat  
US NON-US  
US NON-US  
8/10.0  
4/25.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
7
15  
30  
30  
30  
10  
30  
30  
30  
14/2.5  
10/6.0  
10/6.0  
10/6.0  
42  
60  
50  
70  
50  
70  
6x4 kW  
6x3 kW  
3+N+PE 25  
Q
X
3+PE  
25  
25  
70  
80  
80  
200-240 50/60 1/3 2/3+PE  
N/A  
N/A  
N/A  
Alternative Electric Heat Options  
8/10.0  
4/25.0  
N/A  
N
P
440-480 50/60  
380-415 50/60  
200-240 50/60  
3
3
3
3+PE  
3+N+PE  
3+PE  
38  
55  
50  
70  
50  
70  
3x3 kW  
+
3x4 kW  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Q
X
N/A  
200-240 50/60 1/3 2/3+PE  
Table 16  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washer-Extractors  
Anchoring to Metal Base  
Installation  
The machines must be fixed on a metal base which is  
securely anchored on a concrete base. Refer to  
Figure 44.  
Models IWF033, IWF040, IWF055 and  
IWF075 (M-speed)  
CAUTION  
Ensure that the machine is installed on a  
level floor of sufficient strength and that  
the recommended clearances for  
1
2
3
7
inspection and maintenance are provided.  
Never allow the inspection and  
2
3
maintenance space to be blocked.  
SW020  
4
6
Surface  
The machine must be securely fixed on a flat surface  
(metal base, concrete or solid ground). The anchoring  
is to be done on the 6 provided places in the holes on  
the corners of the base. (See Mounting Bolt Hole  
Locations). Refer to Figure 43.  
5
CHM2103N  
CHM2103N  
1
2
Machine Base  
Nut  
.625 in. (M16)  
3
Washer  
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.625 in. x 2.5 in. (M16X60 mm)  
Bolt  
4
5
6
.625 in. (M16)  
Concrete Base 15.74 in. (400 mm)  
(Models IWF033, IWF040),  
21.65 in. (550 mm) (Model IWF055), and  
27.55 in. (700 mm) (Model IWF075)  
Metal Base  
7
1
Figure 44  
CHM2102N  
1
Mounting Bolt Holes  
Figure 43  
The machine must be placed entirely level. For easy  
maintenance it is recommended to keep a minimal  
distance of 23.62 in. (600 mm) between the wall and  
the back of the machine.  
If several machines are placed next to each other, there  
should be a minimal distance of 1.18 in. (30 mm)  
between each machine.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
5-08-51  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Washer-Extractors  
Directly to Concrete Base  
The machine must be anchored directly to concrete  
base. Refer to Figure 45.  
1
2
5
4
3
CHM2104N  
1
2
Nut  
.625 in. (M16)  
Washer  
1.57 in. x 0.60 in. x 0.15 in.  
(40 mm x 17 mm x 4 mm)  
Bolt  
.625 in. (M16)  
Concrete Base 15.74 in. (400 mm)  
(Models IWF033, IWF040),  
3
4
21.65 in. (550 mm) (Model IWF055), and  
27.55 in. (700 mm) (Model IWF075)  
Machine Base  
5
Figure 45  
IMPORTANT: Machine bolts should be re-checked  
on a quarterly basis.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-08-51  
74  
 

Intel Computer Hardware 80C186XL User Manual
Jasco TV Converter Box AV93299 User Manual
JVC Electronic Keyboard RD MD5 User Manual
JVC Stereo System VS DT68V User Manual
Kathrein Satellite TV System UFD 574 S User Manual
Kawasaki Cordless Saw 691191 User Manual
KitchenAid Ice Maker 2313715A User Manual
KitchenAid Ventilation Hood KHTU705RSS1 User Manual
Kobe Range Hoods Ventilation Hood IS2336SQ User Manual
Kolcraft Stroller S088 R3 User Manual