Promaster 144Z / 148Z / 152Z / 160Z
Owner/Operator Manual
Models
992042 19HP-144Z
992043 21HP-148Z
992044 23HP-152Z
992051 23HP-160Z
992054 25HP-152Z
992055 25HP-160Z
992310 19HP-144Z
992311 21HP-148Z
US Patent 6,301,864
ENGLISH
FRANÇAIS
ESPAÑOL
08498100C 2/03
Supercedes 08498100,A,B
Printed in USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Stated Sound Power Levels are established following Annex VIII “Full Quality Assurance” of directive 2000/14/EC.
Les déclarations de niveau de puissance acoustique sont établies conformément à l’Article VIII « Assurance
qualité totale » de la directive 2000/14/EC.
Die angegebenen Geräuschpegel wurden gemäß Anhang VIII „Totales Qualitäts-Management“ der EU-Richtlinie
2000/14/EC.
Gespecificeerde geluidssterkteniveaus zijn vastgesteld aan de hand van Annex VIII “Full Quality Assurance”
(Volledige kwaliteitsborging) van richtlijn 2000/14/EG.
I livelli di potenza sonora dichiarati sono rilevati in base all’Appendice VIII del “Controllo qualità totale” della direttiva
CE/2000/14.
Los niveles de potencia acústica se establecen siguiendo el Anexo VIII “Garantía de calidad total” de la directiva
2000/14/EC.
De anførte lydstyrkeniveauer er fastlagte efter tillæg VIII “Fuld kvalitets sikring” i direktiv 2000/14/EF.
Lydeffektnivåene er fastsatt etter tillegg VIII ”Full kvalitetssikring” i direktivet 2000/14/EF.
Fastställda ljudnivåer har etablerats enligt bilaga VIII “Full kvalitetssäkring” i direktiv 2000/14/EC.
Notified Body –
SNCH/TUV Rheinland
11, Route de Luxembourg
L-5230 Sandweiler
Entité notifiée – Benachrichtigte
Körperschaft – Certificeringsinstantie
–Organismo notificato – Cuerpo
notificado – Bekendtgjort til – Kunngjøring
til – Underrättad myndighet –
Keeper of Technical File- Tim Peter
Dépositaire du fichier technique - Verwalter der Product Team Leader
technischen Dokumente - Houder technische
Chef d’équipe de produit - Produktteam-Leiter - Teamleider
Product - Capo team produttivo - Jefe del equipo del producto
- Produktansvarlig - Produktansvarlig - Produktledare
gegevens - Depositario del file tecnico -
Depositario del archivo técnico - Ansvarlig for
teknisk data - Ansvarlig for teknisk
dokumentasjon - Innehavare of teknisk fil -
Signature/Unterschrift/
Handtekening/Firma/U
nderskrift/Underskrift
11/22/02
Date/Datum/Data/
Fecha/Dato/Päiväys
Handlekening/Unders
Philip J. Smucker
krift/Allekirjoitus
Manager of Product Conformance
Position/Qualité/Functie/Qualifica/Puesto/Stilling/Titel/Arvo
Ariens Company
WARNING
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FEATURES
ENGLISH
1. Choke Control
2. Throttle Lever
3. Wing Knob
4. Hydraulic Oil Reservoir
5. Fuel Tanks and Caps
6. Steering Levers
7. Battery
8. Mower Lift Lever
9. Fuel Shut Off Valve
10. Mower Deck with Chute
Deflector
11. Cylinder Stops
12. Height of Cut Indicator
13. Foot Board Latch
14. Cylinder Stop Storage Post
15. Parking Brake
16. Seat Adjustment Lever
17. Power Take Off (PTO) Switch
18. Ignition Switch
19. Hour Meter
20. Oil Pressure Indicator
FRANÇAIS
1. Starter
2. Manette des gaz
3. Molette
4. Réservoir d’huile hydraulique
5. Réservoirs de carburant et
bouchons
6. Leviers de direction
7. Batterie
8. Levier de relevage de la
tondeuse
OF3312
Figure 1
9. Robinet de carburant
10. Carter de coupe avec déflecteur
11. Butées de vérin
12. Indicateur de hauteur de coupe
13. Attache du repose-pied
14. Montant de remisage de butées de
vérin
15. Frein de stationnement
16. Levier de réglage du siège
17. Contacteur de régime de la PdF
18. Contacteur de démarrage
19. Compteur horaire
20. Indicateur de pression d'huile
ESPAÑOL
1. Control de aire
2. Palanca de ralentí
3. Perilla de mariposa
4. Depósito de aceite hidráulico
5. Tapas y depósitos de combustible
6. Palancas de dirección
7. Batería
8. Palanca de elevación del cortacésped
9. Válvula de cierre de combustible
10. Plataforma de corte
11. Topes de cilindro
12. Altura del indicador de corte
13. Traba de la plataforma de pie
14. Poste de almacenamiento del tope del
cilindro
15. Freno de estacionamiento
16. Palanca de ajuste del asiento
17. Interruptor de la toma de fuerza (TDF)
18. Interruptor de encendido
19. Horómetro
20. Indicador de la presión del aceite
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 15
Service and Adjustments . . . . . . . . . . . . . . . . . . 16
INTRODUCTION
THE MANUAL
PRODUCT REGISTRATION
Before operation of unit, carefully and completely read
your manuals. The contents will provide you with an
understanding of safety instructions and controls during
normal operation and maintenance.
The Gravely dealer must register the product at the time
of purchase. Registering the product will help the
company process warranty claims or contact you with the
latest service information. All claims meeting
requirements during the limited warranty period will be
honored, whether or not the product registration card is
returned. Keep a proof of purchase if you do not register
your unit.
All reference to left, right, front, or rear are given from
operator sitting in the operation position and facing the
direction of forward travel.
SERVICE AND REPLACEMENT PARTS
Customer Note: If Dealer does not register your product,
please fill out, sign and return the product registration
card to Gravely.
When ordering publications,
Transfer
replacement parts, or making service
model &
inquiries, know the Model and Serial
serial
UNAUTHORIZED REPLACEMENT PARTS
numbers of your unit and engine.
number
Use only Gravely replacement parts. The replacement of
any part on this equipment with anything other than a
Gravely authorized replacement part may adversely
affect the performance, durability, and safety of this unit
and may void the warranty. Gravely disclaims liability for
any claims or damages, whether regarding warranty,
property damage, personal injury or death arising out of
the use of unauthorized replacement parts.
Numbers are located on the product
registration form in theliterature package.
They are printed on a serial number
label, located on the frame of your unit
label from
product
registration
here.
NOTE: To locate your nearest Gravely Dealer, call
DISCLAIMER
Gravely reserves the right to discontinue, change, and
improve its products at any time without public notice or
obligation to the purchaser. The descriptions and
specifications contained in this manual were in effect at
printing. Equipment described within this manual may be
optional. Some illustrations may not be applicable to your
unit.
Serial Number Label
Figure 2
OF1611
• Record Unit Model and Serial numbers here.
DEALER DELIVERY
Dealer should:
1. Test brakes after tractor is assembled to be sure
adjustment has not been disturbed in shipment
• Record Engine Model and Serial numbers here.
2. Check the safety interlock system to make sure that
it is functioning properly. With operator on seat, unit
must not start unless steering levers are in neutral
Copyright 2003 Ariens Company
GB - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
(N) and Power Takeoff (PTO) is disengaged (Off).
Engine must stop if operator leaves seat when
steering levers are in any drive position or PTO is
Discuss and emphasize the Safety Precautions.
Give customer Owner/Operator, Parts, and Engine
Manuals. Advise customer to thoroughly read and
understand them.
Customer Note:Your Dealer has been provided
complete setup and preparation instructions which must
be completed prior to you taking delivery of this unit. The
dealer is required to review important information in this
manual with you before or upon delivery of the unit or
attachment.
3. Fill out Original Purchaser Registration Card and
return the card to Gravely.
4. Explain Gravely Limited Warranty Policy.
5. Explain recommended lubrication and
maintenance. Advise customer on adjustments.
Instruct customer on controls and operation of unit.
SAFETY
WARNING: This cutting machine is capable of
amputating hands and feet and throwing
objects. Failure to observe the safety
WARNING: POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD RESULT in
death or serious injury.
instructions in the manuals and on decals could
result in serious injury or death.
CAUTION: POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY RESULT in
minor or moderate injury. It may also be used to
alert against unsafe practices.
Slopes are a major factor related to
loss-of-control and tip-over accidents. Operation
on all slopes requires extra caution.
Tragic accidents can occur if the operator is not
alert to the presence of children. Never assume
that children will remain where you last saw
them.
NOTATIONS
NOTE: General reference information for proper opera-
tion and maintenance practices.
Gasoline is extremely flammable and the vapors
are explosive, handle with care.
IMPORTANT: Specific procedures or information
required to prevent damage to unit or attachment.
Disengage attachment, stop unit and engine,
remove key, engage parking brake, and allow
moving parts to stop before leaving operator’s
position.
PRACTICES AND LAWS
Practice usual and customary safe working precautions,
for the benefit of yourself and others. Understand and
follow all safety messages. Be alert to unsafe conditions
and the possibility of minor, moderate, or serious injury or
death. Learn applicable rules and laws in your area,
including those that may restrict the age of the operator.
SAFETY ALERT SYMBOL
These are safety alert symbols. They
mean:
•ATTENTION!
REQUIRED OPERATOR TRAINING
OL1253
•YOUR SAFETY IS INVOLVED!
Original purchaser of this unit was instructed by the seller
on safe and proper operation. If unit is to be used by
someone other than original purchaser (loaned, rented or
sold), ALWAYS provide this manual and any needed
safety training before operation.
When you see this symbol:
•BECOME ALERT!
•OBEY THE MESSAGE!
OL3900
SIGNAL WORDS
The safety alert symbols above and signal words below
are used on decals and in this manual.
Read and understand all safety messages.
DANGER: IMMINENTLY HAZARDOUS
SITUATION! If not avoided, WILL RESULT in
death or serious injury.
GB - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY DECALS AND LOCATIONS
ALWAYS replace missing or damaged Safety Decals.
DANGER / PELIGRO
• Risque de blessures - ne pas s’approcher des pièces en
7
• Avoid injury - Stay clear of rotating parts.
3
DANGER/PELIGRO
mouvement.
• Evitar lesiones - Mantenerse alejado de las piezas giratorias.
6
1
07731400D
5
DANGER / PELIGRO
077560
17
MAX
TO AVOID SERIOUS INJURY OR DEATH
•
•
Read the operator's manual.
•
If machine stops going uphill, stop blade and
Keep children and others away from unit while
operating.
back down slowly.
•
•
Avoid sudden turns.
Keep safety devices (guards, shields, switches,
etc.) in place and working.
Check interlock system per manual before use.
Understand location and function of all controls.
Never allow operation by untrained persons.
4
•
Never direct discharge toward other people.
Thrown objects can cause injury.
Look down and behind before and while backing.
Never carry children.
•
•
•
•
•
•
WARNING/AVERTISSEMENT/ADVERTENCIA
Go up and down slopes, not across.
Do not operate mower Ne jamais utiliser No operar segadora
unless guards are in la tondeuse sans menos que las defensas
operating position or protecteur sur le esten en posicion de
bagger is attached. canal d'ejection ou operacion el
sans le bac monte. recogedor este fijo.
a
POUR EVITER LES BLESSURES GRAVES
OU LA MORT
PARA EVITAR DAÑOS SERIOS
MUERTE
O
LA
•
Lire le manuel d'utilisation.
•
Leer el manual del operador.
Mantenga la unidad alejada de los niños
personas cuando esté en funcionamiento.
o
•
Éloigner les enfants et tout autre personne
pendant le fonctionnement de la machine.
Ne jamais décharger directement en direction
de quelqu’un. Des particules projetées
peuvent provoquer des blessures.
Regardez derrière et sur les côtés lorsque
vous reculez.
•
y
otras
07742300B
•
•
Nunca dirija la descarga hacia otras personas,
ya que los objetos lanzados pueden provocar
lesiones.
•
•
Antes
detras.
Nunca monten niños.
Suba baje pendientes, no transversalmente.
Si la maquina se detiene subiendo cuesta,
desactive la cuchilla baje lentamente.
Evite viradas subitas.
y
durante retroceso mirar hacia abajo
y
3
•
•
Ne transportez jamais d'enfant.
•
•
•
DANGER/PELIGRO
Tondez toujours de haut en bas et
inversement jamais le long des pentes.
y
•
Si la machine s'arrête en montee. Debrayez
y
la lame et redescendez doucement.
Evitez les virages brusques.
•
•
•
•
Mantenga artefactos de seguridad (defensas,
Maintenez toujours en place tous les
elements de sécurité (protecteurs,
interrupteurs, etc.).
protectores, interruptores, etc.) en su lugar
trabajando.
y
•
•
•
Verifique en el manual el sistema de engranar
antes de usar.
•
Controler le bon fonctionnement du système
de sécurité avant utilisation tel qu'indiqué
dans le manuel d'utilisation.
Tenga conocimiento de funciones
y
07731400D
localizaciones de todos los controles.
No permitir que personal sin la necesaria
formación use la máquina.
•
•
Comprenez bien la fonction et la situation de
chacun des leviers et boutons de commande.
Ne jamais permettre l'utilisation par des
personnes n'ayant pas reçu la formation
nécessaire.
05359300
2
05359400
OF1625
Figure 3
Go up and down slopes, not across.
1. DANGER!TO AVOID SERIOUS INJURY OR
DEATH
DO NOT operate on slopes over 17˚.
MAX
17°
Read Owner/Operator Manual.
OL4450
• If machine stops going uphill, stop blade and back
OL1801
down slowly.
• Avoid sudden turns.
Keep children and others away from unit while
operating.
• Keep safety devices (guards, shields, switches, etc.)
in place and working.
• Check interlock system per manual before use.
• Understand location and function of all controls.
• Never allow operation by untrained persons.
OL4370
Never direct discharge toward other people.
Thrown objects can cause injury. Remove
objects that could be thrown by the blade.
2. PINCH POINT
OL0910
Avoid pinch points.
Look down and behind before and while
backing.
OF3330
OL4460
3. DANGER! ROTATING PARTS
Keep children out of work area and under
watchful care of a responsible adult.
Always keep feet and hands away from
rotating parts.
OL4470
OL3030
NEVER CARRY CHILDREN.
OL4480
GB - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Always stand clear of discharge area. Do not
direct discharge toward other people.
ALWAYS remove key and/or wire from spark plug before
assembly. Unintentional engine start up can cause death
or serious injury.
Complete a walk around inspection of unit and work area
to understand:
OL0910
Keep people away from unit while operating.
• Work area • Your unit • All safety decals
ALWAYS check overhead and side clearances carefully
before operation. ALWAYS be aware of traffic when
operating along streets or curbs.
OL3292
Shut off engine, remove key, read manual
before you adjust or repair unit.
Keep children and people away.
Keep children out of work area and under watchful care
of a responsible adult.
OL4010
Keep area of operation clear of all toys, pets, and debris.
Thrown objects can cause injury.
NO STEP! Always keep feet away from
rotating parts.
Check for weak spots on docks, ramps or floors. Avoid
uneven work areas and rough terrain. Stay alert for
hidden hazards or traffic.
OL4420
DO NOT operate near drop-offs, ditches, or
embankments. Unit can suddenly turn over if a wheel is
over the edge of a cliff or ditch, or if an edge caves in.
4. WARNING!
Do not operate mower unless guards are in operating
position or bagger is attached.
Data indicates that operators, age 60 and above, are
involved in a larger percentage of riding mower related
injuries. These operators should evaluate their ability to
operate the riding mower safely enough to protect
themselves and others from serious injury.
Always stand clear of discharge area.
OL4430
Read the entire Owner/Operator manual and other
training material. If the operator or the mechanic cannot
read the manual, it is the owner’s responsibility to explain
it to them. Only the user can prevent and is responsible
for accidents or injuries occurring to themselves, other
people or property.
Do not operate mower unless bagger is
attached or guards are in operating position.
OL3320
Only trained adults may operate or service unit.
Local regulations may restrict the age of the operator.
Training includes actual operation.
5. HOT SURFACES!
DO NOT touch parts which are hot from
operation. ALWAYS allow parts to cool.
NEVER allow children to operate or play on or near unit.
Be alert and shut off unit if children enter area.
OS0731
NEVER operate unit after or during the use of
medication, drugs or alcohol. Safe operation requires
your complete and unimpaired attention at all times.
6. ROTATING PARTS
AVOID INJURY. Stay clear of rotating parts.
DO NOT wear loose clothing or jewelry and tie back hair
that may get caught in rotating parts.
OF3450
Wear adequate outer garments.
NEVER wear open sandals or canvas shoes during
operation. Wear adequate safety gear, protective gloves
and footwear.
7. DANGER!
AVOID INJURY. Stay clear of rotating parts.
Wear proper footwear to improve footing on slippery
surfaces.
OL4730
Always wear safety goggles or safety glasses with side
shields when operating mower.
SAFETY RULES
Read, understand, and follow all safety practices in
Owner/Operator Manual before beginning assembly.
Failure to follow instructions could result in personal
injury and/or damage to unit.
Moving parts can cut or amputate fingers or a hand.
Wrap blade(s) or wear gloves to service. On multiblade
mowers, rotation of one blade will cause all blades to
rotate.
GB - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
NEVER place your hands or any part of your body or
clothing inside or near any moving part while unit is
running.
DO NOT operate at too fast a rate. DO NOT change
engine governor settings or over-speed engine. Slow
down before turning.
ALWAYS keep hands and feet away from all rotating
parts during operation. Rotating parts can cut off body
parts.
DO NOT operate in reverse unless absolutely necessary.
ALWAYS look down and behind before and while
backing.
ALWAYS keep body and hands away from pin holes or
nozzles which eject hydraulic fluid under pressure.
If equipment vibrates abnormally, stop engine at once,
wait for moving parts to stop and remove wire from spark
plug. Repair any damage before restarting unit.
DO NOT touch parts which are hot. Allow parts to cool.
ALWAYS keep hands and feet away from all pinch points.
Take all possible precautions when leaving unit
unattended. Shut off engine. Remove wire from spark
plug and secure it away from spark plug.
Fumes from the engine exhaust can cause death or
serious injury. DO NOT run engine in an enclosed area.
Always provide good ventilation.
ALWAYS remove key to prevent unauthorized use.
Know the weight of loads. Limit loads to those you can
safely control and the unit can safely handle.
Read, understand, and follow all instructions in the
manual and on the machine before starting.
Disengage PTO when attachment is not in use. ALWAYS
turn off power to attachment when travelling, crossing
driveways, etc.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an Emergency
• Braking and steering characteristics
• Turning radius and clearances
Mow up and down slopes, not across them.
DO NOT operate on slopes of more than 17 degrees.
Use of a Rollover Protection System (ROPS) is
recommended for slope operation. See Attachments and
Accessories.
Keep safety devices or guards in place and functioning
properly. NEVER modify or remove safety devices.
Always wear a seat belt when operating unit using a
Rollover Protection System (ROPS).
Ensure Safety Interlock System is functioning properly.
DO NOT operate unit if safety interlock is damaged or
disabled.
Keep all movements on the slope slow and gradual. Do
not make sudden changes in speed or direction.
Start and operate unit only when seated in operator’s
position. Steering control levers must be in neutral, PTO
disengaged and parking brake set when starting engine.
Avoid starting or stopping on the slope. If tires lose
traction, disengage the blades and proceed slowly
straight down the slope.
Use care when approaching blind corners, shrubs, trees
or other objects that may obscure vision.
If you cannot back up a slope or you feel uneasy on it, do
not mow it.
Dust, smoke, fog, etc. can reduce vision and cause an
accident. Mow only in daylight or good artificial light.
DO NOT park on slopes unless necessary.When parking
on slope always chock or block wheels. Always engage
parking brake.
Avoid slippery surfaces. Always be sure of your footing.
DO NOT mow on wet grass. Reduced traction could
cause sliding and effect the machine’s stability.
Use a slow speed.Tires may lose traction on slopes even
though the brakes are functioning properly.
Watch for traffic when operating near or crossing
Do not bypass transmission when on a slope.
roadways.
Use extra care when loading or unloading unit onto trailer
or truck.
Never carry passengers.
DO NOT try to stabilize the machine by putting your foot
on the ground.
Secure unit chassis to transport vehicle. NEVER secure
from rods or linkages that could be damaged.
Never direct discharge towards persons or property that
may be injured or damaged by thrown objects. Use
extreme caution on gravel surfaces.
DO NOT transport machine while engine is running.
ALWAYS turn off power to attachment when transporting.
Keep unit free of debris. Clean up oil or fuel spills.
Always stand clear of the discharge area.
This product is equipped with an internal combustion
type engine. DO NOT use unit on or near any
unimproved, forest-covered or brush covered land unless
exhaust system is equipped with a spark arrester
meeting applicable local, state or federal laws. A spark
arrester, if it is used, must be maintained in effective
working order by operator.
ALWAYS disengage PTO, stop unit and engine, remove
key, engage parking brake and allow moving parts to stop
before leaving operator’s position.
Never engage PTO while raising attachment or when
attachment is in raised position.
GB - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Fuel is highly flammable and its vapors are explosive.
Handle with care. Use an approved fuel container.
ALWAYS block wheels and know all jack stands are
strong and secure and will hold weight of unit during
maintenance.
NO smoking, NO sparks, NO flames. ALWAYS allow
engine to cool before servicing.
Release pressure slowly from components with stored
energy.
NEVER fill fuel tank when engine is running or hot from
operation.
Keep nuts and bolts tight, especially blade attachment
bolts, and keep equipment in good condition.
NEVER fill or drain fuel tank indoors.
NEVER attempt to make any adjustments to unit while
engine is running (except where specifically
recommended). Stop engine, remove key or spark plug
wire and wait for all moving parts to stop before servicing
or cleaning.
Replace fuel cap securely and clean up spilled fuel.
Never fill containers inside a vehicle or on a truck or
trailer bed with a plastic liner. Always place containers on
the ground away from your vehicle before filling.
When practical, remove gas-powered equipment from
the truck or trailer and refuel it on the ground. If this is not
possible, then refuel such equipment on a trailer with a
portable container, rather than from a gasoline dispenser
nozzle.
Check parking brake operation frequently. Adjust and
service as required.
ALWAYS maintain unit in safe operating condition.
Damaged or worn out muffler can cause fire or explosion.
NO smoking, NO sparks, NO flames. ALWAYS allow
engine to cool before servicing.
Keep the nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
Do not use a nozzle lock-open device.
Maintain or replace safety and instructions labels, as
necessary.
If fuel is spilled on clothing, change clothing immediately.
NEVER store unit with fuel in fuel tank, inside a building
where any ignition sources are present.
Avoid Electric Shock. Objects contacting both battery
terminals at the same time may result in injury and unit
damage. DO NOT reverse battery connections.
Shut off fuel and allow engine to cool completely before
storing in closed area or covering unit.
Explosive Gases from battery can cause death or serious
injury. Poisonous battery fluid contains sulfuric acid and
its contact with skin, eyes or clothing can cause severe
chemical burns.
Clean grass and debris from unit, especially from around
muffler and engine, to help prevent fires.
For extended storage, shut off fuel and clean unit
thoroughly. See engine manual for proper storage.
No flames, No sparks, No smoking near battery.
ALWAYS wear safety glasses and protective gear near
battery.
Lower cutting deck unless a positive mechanical lock is
used.
DO NOT TIP battery beyond a 45˚ angle in any direction.
Use only attachments or accessories designed for your
unit.
ALWAYS keep batteries out of reach of children.
Check attachment components frequently. If worn or
damaged, replace with manufacturer’s recommended
parts.
Battery posts, terminals and related accessories contain
lead and lead compounds, chemicals known to the State
of California to cause cancer and reproductive harm.
Wash hands after handling.
GB - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
WARNING: Discharge chute must pivot freely.
DO NOT over tighten the pivot bolts.
8. Fill Engine Fuel Tank - Add clean fuel to the fuel
tank.
UNIT ASSEMBLY
IMPORTANT: Refer to Engine Manual for fuel type.
Package Contents:
Unit, Mower Deck and Literature Pack
9. Hardware - Check for loose hardware.
10. Check Safety Interlock System - Check to see that
Preparation Checklist
Refer to the Owner/Operator manual as required.
1. Unpack Unit - Remove shrink wrap and packaging
materials.
WARNING: FAILURE OF INTERLOCK together
with improper operation can result in severe
personal injury.
2. Remove Unit From Container - Open Bypass Valves
11. Lubrication - Lubricate all fittings per maintenance
label under seat and check hydrostat oil level (See
Push unit from container onto a level surface. Close
the dump valves.
3. Tires - Adjust tire pressure for front tires; 20-25 PSI
(138-172 kN/m2), rear tires; 12-15 PSI
(83-103 kN/m2).
12. Level Deck - Check unit to assure deck level set at
13. Check Function of all Controls - Ensure unit runs
and performs properly.
4. Position Steering Levers - Remove bolts and
spacers from steering rod. Flip the steering levers
into operating position. Reinstall spacers, bolts and
WARNING: FAILURE OF CONTROLS could
result in death or serious injury.
OF3141
1. Steering Lever in
Shipping Position
3. Steering Lever in
Operation Position
2. Spacers and
Hardware
Figure 4
5. Battery - Remove battery from unit and charge (See
6. Check Engine Crankcase - Check and add oil if
needed. See Engine Manual for specifications.
7. 60" Decks - Remove, reverse, and reinstall
discharge chute and mounting bracket.
GB - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
B. For straight forward travel, push both steering control
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
levers forward.
C. To turn left, pull the left back or push the right
steering control lever forward or a combination of
both.
CONTROLS AND FEATURES
See Figure 1 for Controls and Features locations.
D. To turn right, pull the right back or push the left
steering control lever forward or a combination of
both.
Safety Interlock System
To stop, return both steering levers to neutral.
NOTE: The steering controls are mechanically locked in
neutral whenever the parking brake is engaged.
WARNING: Safety interlock system failure and
improper operation of unit can result in death or
serious injury. Test this system each time the
unit is operated. If this system does not function
as described, do not operate until repairs are
made.
NOTE: Aggressive turning can scuff or damage lawns.
ALWAYS keep both wheels rotating when making sharp
turns. DO NOT make turns with inside wheel completely
stopped. To obtain minimum turning radius, slowly
reverse inside wheel while moving outside wheel slowly
forward.
Perform the following tests to ensure the safety interlock
system is working properly. If the unit does not perform
as stated, contact your Gravely dealer for repairs.
Ignition Switch
1
NOTE: When the parking brake is engaged, the steering
levers are locked in neutral.
Operate the ignition switch with the
removable key. The switch has three
positions: Off (1), On (2) and Start (3). To
start the engine, turn the key to Start, then
release to On.To stop the engine, turn the
key to Off.
2
Test Steering PTO
Levers
Parking
Brake
Engine
3
OF1750
STARTING INTERLOCK
1
2
3
Neutral
Neutral
Neutral
Off
On
Off
Engaged
Engaged
Disengaged Doesn’t Start
Starts
Doesn’t Start
Choke Control
Push the choke lever forward to start a
cold engine. Pull the choke lever to the
rear when the engine gets warm.
OPERATING INTERLOCK (ENGINE ON)
4*
5*
Neutral
Neutral
On
Off
Engaged
Disengaged
Shuts Off
Shuts Off
Throttle Lever
* Operator lifts off seat.
1
The throttle lever changes the engine
speed. Move the throttle lever to Fast (1)
to increase engine speed. Move the lever
to Slow (2) to decrease engine speed.
Parking Brake Interlock System
With the parking brake engaged, the steering levers must
be locked in neutral.
With the parking brake disengaged, the engine must not
start and the engine must shut off if the operator leaves
the seat.
Steering Levers
B
A
2
OF1700
Power Take Off (PTO) Switch
ON
Power take off (PTO) switch engages and
disengages the mower blades.
D
C
Pull the power take off (PTO) switch to
"On" position to engage mower blades.
077348A
Push the power take off (PTO) switch to
"Off" position to disengage mower blades.
The steering levers control speed and direction. In
addition, they will stop the unit.
OE0261
OFF
A. For reverse travel, pull both steering control levers
backward.
GB - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: The engine will not start unless the steering con-
trol levers are in the neutral position, the PTO switch is in
the “Off” position and parking brake is set.
Hour Meter
Records total number of hours the engine
has been run.
IMPORTANT: Keep a record of Hour
Meter readings for recommended
Lubrication and Maintenance intervals.
Mower Lift Lever
Use the mower lift lever, located on the left
side of tractor, to raise and lower the
mower deck.
NOTE: For accurate readings be sure Ignition Switch is
OFF when unit is not in operation.
Pull the lever rearward to raise or push the
lever forward to lower the mower deck.
FILLING FUEL TANK
Release lever to hold the mower deck in
selected position.
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
The cutting height indicator on the right lift
cylinder shows the approximate cutting
height in inches.
OF1700
Cylinder Stops
Add fuel to Fuel Tank as needed. See your Engine
Manual for correct type and grade of fuel.
The cylinder stops ensure the same cutting height after
raising the deck to clear an obstacle. Store the stops on
the post behind the hydraulic lift cylinder.The stops come
in two (2) sizes, 1/4" (.64 cm) and 1/2" (1.27 cm).
To add fuel to the fuel tank:
1. Place unit in an open or well-ventilated open area.
2. Stop the engine.
1. Remove the cylinder stops from the post and snap
onto the lift cylinder rod.
3. Clean the fuel cap and the area around the fuel cap
to prevent dirt from entering the fuel tank. Remove
the cap from the fuel tank.
2. Push the lift lever forward until the cylinder rests
against the cylinder stops.
4. Fill the fuel tank to within 1" (25 mm) below bottom
Fuel Shut-Off Valve
of filler neck.
Use this valve to control fuel flow from
left or right fuel tank.
5. Replace fuel cap and tighten.
6. Clean up any spilled fuel.
OFF
LEFT
TANK
RIGHT
TANK
Open the valve to operate the engine.
Turn the valve to "Off" when storing or
transporting the unit.
OF1881
PRE-START
CAUTION: Make sure all hardware is tight, all
safety devices in place and all adjustments
made correctly.
Parking Brake Lever
1. Pull lever up to engage parking brake.
2. Push lever down to disengage parking
brake.
1. Check Safety Interlock System
If this system does not function as described do not
operate until repairs are made.
OF1740
Seat Adjustments
2. Check Air Cleaner
Check air filter for dirt. Clean as required. Follow Engine
Manual Maintenance Schedule.
WARNING: Make all seat adjustments with unit
stationary, parking brake on and engine shut off.
3. Check Engine Fuel and Crankcase Oil
To adjust seat forward or backward:
Check and add fuel if required. Check that engine
crankcase oil is full. Follow Engine Manual Maintenance
Schedule.
1. While seated, pull seat adjustment lever outward
and slide seat into desired position.
2. Release lever and slide seat forward or back to lock
seat into position.
4. Check Tire Pressure
5. Check Hydraulic Fluid Level
6. Adjust Seat
Be sure all controls can be reached safely from
operator’s position.
Engine Oil Pressure Indicator
Indicator lights up “Red” if the oil pressure
is low. Check oil level and add if
necessary. Refer to engine manual.
OG0601
GB - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
9. When you know how to operate the unit, select a
speed appropriate to your mowing conditions.
STOPPING IN AN EMERGENCY
The unit can be stopped immediately at any time by
turning the ignition key to the "Off" position.
PARKING
To park the unit:
STARTING AND SHUT OFF
1. Bring the steering levers to neutral. Turn off PTO.
2. Move the throttle lever to the “Slow” position.
3. Engage the parking brake.
4. Lower the attachment.
CAUTION: Read entire Owner/Operator
Manual, Clutch Manual, and Engine Manual first.
DO NOT attempt to start engine at this time.
To start the engine:
5. Turn the ignition key to the “Off” position and
1. Make sure the steering levers are in neutral.
2. Put the PTO switch in the “Off” position.
3. Engage parking brake.
remove the key.
MOVING THE UNIT WITH THE ENGINE OFF
IMPORTANT: Never tow unit.
4. If the engine is cold, move the choke control to the
“On” position. If the engine is warm or hot, do not
use choke.
1. Shut OFF engine.
5. Move the throttle to 3/4 “Fast” position. See Engine
Manual for detailed instructions.
3. Turn right and left bypass valve levers
counterclockwise 1/2 turn (Figure 5).
6. Put the ignition key in the switch and turn it to the
“Start” position.
WARNING: Do not bypass transmission when
on a slope.
7. As soon as the engine starts, release the key.
8. Move the choke control to the “Off” position from
the “Choke” position. Wait until the engine is
running smoothly before operation.
4. Disengage parking brake.
5. Push unit to desired location.
6. Engage parking brake.
To stop the engine:
1. Bring the steering levers to neutral. Disengage the
PTO and engage the parking brake.
7. Turn bypass valve levers clockwise 1/2 turn.
2. Move the throttle lever to the “Slow” position.
3. Turn the ignition key to the “Off” position.
TO MOW WITH UNIT
Operate the unit only when seated in the operator’s
position.
1. Start the engine. Let the engine warm until it is
running smoothly.
2. Release parking brake.
WARNING: Move the steering control levers
slowly and keep the throttle control lever at slow
speed until you learn how to operate the unit.
Front of unit
3. Bring the steering levers to neutral.
1. Left Bypass Valve Lever
2. Right Bypass Valve Lever
4. Slow the engine down to about 3/4 speed.
5. Turn ON the PTO switch to engage the mower.
Figure 5
OF3371
IMPORTANT: Never engage the PTO if the mower is
plugged with grass or other material. This may cause
damage to the electric clutch.
6. Move throttle control to fast.
7. Move the steering levers forward to obtain a slow
ground speed.
8. To disengage the mower, move the PTO switch to
the “Off” position.
GB - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Mow with the engine set at full throttle.
FOR BEST PERFORMANCE
Cut grass when it is dry.
When mulching, only remove 1/3 of grass length per
cutting.
Keep mower blades sharp.
Discharge clippings into areas already cut.
Vary cutting pattern with each mowing.
Keep mower deck properly leveled.
Adjust anti-scalp rollers to prevent scalping.
Do not allow grass or debris to collect inside of mower
deck. Clean after each use.
Do not set height of cut too low. For very tall grass, mow
twice.
Do not travel too fast.
MAINTENANCE SCHEDULE
Proper maintenance can prolong the life of unit. The
following charts show the recommended service
schedule. More frequent service may be required due to
working conditions (heavy loads, high ambient
temperatures, dusty conditions, or airborne debris).
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
See the maintenance instructions in the Engine Manual
for additional information.
Period Service
Task
Check Safety Interlock
WARNING: Safety interlock system failure and improper
operation of unit can result in death or serious injury. Test
this system each time the unit is operated. If this system
does not function as described, do not operate until repairs
Each Use
Check Hydraulic Fluid
Check hydraulic oil level mark on cap/dipstick. Add 15W50 Synthetic oil
Check Tires
Follow Engine Manual Maintenance
Schedule
Perform scheduled engine maintenance. Refer to engine manual for
detailed instructions.
Check Mower Blades
Check mower blades for wear. Sharpen or replace as needed. See
Every 25
Hours
Lubricate Unit
Every 50
Hours
Clean Battery
Check Fasteners
Check mower blade mounting hardware and all other fasteners. Replace
missing or damaged fasteners. Tighten all nuts and bolts to their correct
torque value.
Every 100
Hours
Check Belts
Change Hydraulic Fluid and Filter
Every 500
Hours
GB - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE AND ADJUSTMENTS
Gravely Dealers will provide any service which may be
HYDRAULIC FLUID
required to keep your unit operating at peak efficiency.
Should engine service be required, it can be obtained
from a Gravely Dealer or the engine manufacturer’s
authorized service center.
WARNING: HYDRAULIC FLUID can result in
severe burns. Fluid in hydraulic system can
penetrate skin and result in serious injury or
death.
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
Be sure to stop the engine before doing any
work on hydraulic parts.
Keep body and hands away from pin holes or
nozzles which expel hydraulic fluid when under
pressure. Use paper or cardboard, not hands, to
search for leaks.
CAUTION: HOT SURFACES may result in
injury. DO NOT touch engine or drive parts
which are hot from operation. Allow parts to cool
before servicing.
Ensure all hydraulic fluid connections are tight
and all hydraulic hoses and lines are in good
condition before applying pressure to system.
SERVICE POSITION
FOREIGN FLUID INJECTED INTO BODY can
result in gangrene. Fluid must be surgically
removed within a few hours by a doctor familiar
with this form of injury.
1. Place unit on a flat level surface. ALWAYS stop
engine. Assure unit is secure and will not tip over.
Strap and clamp onto lift if used.
2. Place steering levers in neutral and engage parking
brake.
Check Hydraulic Fluid Level
3. Remove wing knob.
Remove hex nut (992310, 311).
FULL Mark
4. Tip seat forward (Figure 6).
Operating
Range
CAUTION: Be sure footing is secure to
accomodate weight shift of seat when rotating it
into service position.
OE0380
1. Shut OFF engine. Engage parking brake. Remove
the ignition key.
5. When service is complete, lower seat and secure
with wing knob or hex nut.
3. Remove any dirt that may be around the
cap/dipstick on the hydraulic reservoir.
4. Remove cap/dipstick.
5. Check hydraulic oil level mark on cap/dipstick.
6. Add 15W50 Synthetic oil as needed. Do not overfill.
Change Hydraulic Fluid and Filter
Change the hydraulic oil filter and hydraulic oil every 500
hours. Use Mobil 15W50 synthetic oil for best component
life.
1. Clean around dipstick cap and dipstick. Remove
dipstick.
2. Place container under oil filter to catch oil.
3. Remove oil filter.
OF3361
4. Allow tank to drain.
1. Service Position
2. Wing Knob
3. Steering Levers
4. Parking Brake
5. Battery
5. Lubricate rubber gasket on new oil filter with clean
hydraulic oil.
6. Spin new oil filter onto filter housing until it makes
contact. Tighten oil filter another 1/2 turn.
Figure 6
GB - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Add new oil to the oil tank. It will take about 4
quarts. Use Mobil 15W50 synthetic oil for best
pump and wheel motor life.
DO NOT Sharpen to This Pattern
8. Properly dispose of waste oil.
MOWER BLADES
Remove
CAUTION: Use sturdy gloves or padding to
protect hands when working with mower
blades.
DISCARD if More
Than 1/2 in. (1.27 cm)
1. Turn the engine off. Remove the ignition key.
Remove the ignition wire from the spark plugs.
2. Remove the bolts, lock washer, flat washers, and
blades from the spindle shafts.
Replace
1. Put the blades, flat washers, lock washers, and the
bolts back on the spindle shafts.
Sharpen to This Pattern
2. Tighten the bolts to a torque of 115-120 lbf-ft
OT0792
(156-162.6 N•m).
3. Replace the ignition wire on the spark plugs.
1. Cutting Edge
2. Square Corner
3. Air Lift Erosion
4. Air Lift
Sharpen the Mower Blades
Figure 7
CAUTION: DO NOT sharpen mower blades
while on unit. An unbalanced mower blade will
cause excessive vibration and eventual
damage to unit. Check mower blade balance
before reinstalling blades.
BATTERY
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
NEVER weld or straighten bent blades.
1. Remove mower blade from unit.
Discard mower blade if:
WARNING: Battery posts, terminals and related
accessories contain lead and lead compounds,
chemicals known to the State of California to
cause cancer and reproductive harm. Wash
hands after handling.
•
•
•
More than 1/2 in. (1.27 cm) of metal is removed.
Air lifts become eroded.
Blade is bent or broken.
2. Sharpen mower blade by removing an equal
amount of material from each end of mower blade.
DO NOT change angle of cutting edge or round the
corner of the mower blade.
Unit comes equipped with a maintenance-free battery
that requires no regular maintenance except cleaning the
terminals.
3. Check mower blade balance.
Remove Battery
Slide mower blade on an unthreaded bolt. A
balanced blade should remain in a horizontal
position. If either end of mower blade moves
downward, sharpen the heavy end until blade is
balanced.
1. Shut OFF engine. Enage parking brake. Remove
the ignition key.
2. Place seat in the service position (See
3. Disconnect cables from battery (negative, then
positive) (Figure 8).
4. Install mower blade(s) on unit.
5. Tighten the bolts to a torque of 115-120 lbf-ft
4. Remove hold down and remove battery.
(156-162.6 N•m).
Replace Battery
1. Replace battery and secure with battery hold down.
2. Reconnect cables to battery (positive, then
negative). Position boot over positive terminal.
GB - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Return seat to operating position.
Clean Battery
Jump Starting Battery
Keep battery and its terminals clean. Inspect every 100
operating hours or monthly for best performance.
The unit used for jump starting should have a 12 volt
battery with at least 500 cold cranking amperes, and a
negatively grounded system.
NOTE: Ensure battery is not frozen. If the fluid is frozen,
remove battery from unit and allow it to thaw before
charging.
1. Connect the positive (+) jumper cable to the positive
terminal of the discharged battery (Figure 8).
2. Connect the other end of the same jumper cable to
the positive (+) terminal of the booster battery.
3. Connect one end of the second jumper cable to the
negative (–) terminal of the booster battery.
4. Make the final jumper cable connection to the
engine block or the furthest ground point away from
the discharged battery.
1. Negative terminal
2. Positive terminal
3. Battery
Figure 8
WARNING: Make sure cables are clear of any
OF1671
moving engine parts before starting engine.
5. Start engine (refer to Operation Section). If engine
will not start after several tries, unit or battery may
need service.
2. Clean terminals and battery cable ends with wire
brush.
3. Coat terminals with dielectric grease or petroleum
jelly.
6. After engine starts, leave cables connected for one
to two minutes.
7. Disconnect cables in reverse order.
8. Operate unit as normal to charge battery.
Charging the Battery
Battery Electrolyte First Aid
Follow First Aid directions for contact with battery fluid.
LUBRICATE UNIT
Apply oil at all pivot points and pin connections.
• External Contact: Flush with water.
• Eyes: Flush with water for at least 15 minutes and get
medical attention immediately!
• Internal Contact: Drink large quantities of water.
Follow with Milk of Magnesia, beaten egg or
vegetable oil. Get medical attention immediately!
1
In case of internal contact, DO NOT induce vomiting!
IMPORTANT: DO NOT fast charge. Charging at a higher
rate will damage or destroy battery. ONLY use an
automatic charger designed for use with your battery.
OF1793
ALWAYS follow information provided on battery by
battery manufacturer. Contact battery manufacturer for
extensive instructions to charge battery.
REF LUBRICATION QTY
LOCATION
INTERVAL
1
REPACK
OIL
2
CASTER PIVOT 400 Hrs
ALL PIVOT
POINTS, PIN
CONNECTIONS
50 Hrs
2. Place battery on bench or other well-ventilated
place.
Figure 9
3. Connect positive (+) lead of charger to positive (+)
terminal, and negative (–) lead to negative (–)
terminal.
4. Charge battery according to charger and battery
manufacturers’ instructions.
GB - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Eliminating Excessive Creeping of the Unit
STEERING CONTROL NEUTRAL
ADJUSTMENT
If the steering levers do not line up (match) or the unit has
excessive creeping when the steering levers are in
neutral, adjust as follows.
WARNING: This adjustment requires operating
the engine. Use extreme care to avoid contact
with moving parts and hot surfaces. Be sure
rear of unit is well supported and secure before
starting engine.
Adjusting the Steering Levers to Line Up
(Match) (Figure 10)
1. Shut OFF engine. Engage parking brake. Remove
the ignition key.
1. If hydraulic system is cold, run unit for a minimum of
five minutes, then shut OFF engine.
2. With the unit up to and facing a wall, jack the unit up
so that both drive wheels are off the ground.
3. Loosen damper locknut on the same side as the
steering lever to be adjusted.
3. Start the engine and release the parking brake.
4. Move the steering levers from Forward to Reverse
several times to make sure controls are free. Then
return steering levers to neutral position.
4. Loosen brake interlock on the same side as
steering lever to be adjusted.
5. Loosen tie rod jam nut and turn tie rod until steering
levers are aligned.
5. Check wheel(s) for movement.
6. Shut OFF engine.
6. Tighten jam nut on tie rod, tighten brake interlock
and tighten damper locknut.
NOTE: The right and left steering levers are adjusted the
same way. To access the tie-rod, place seat in service
7. Adjust tie-rod(s):
If the wheel is moving in a forward direction:
a. Loosen the jam nut on each end of the tie-rod.
b. Turn tie-rod counterclockwise (lengthening the
distance between the steering lever and
hydrostatic transmission) several times.
If the wheel is moving in a reverse direction:
a. Loosen the jam nut on each end of the tie-rod.
b. Turn tie-rod clockwise (decreasing the distance
between the steering lever and hydrostatic
transmission) several times.
8. Return seat to operating position.
9. Start engine.
10. Move steering levers from Forward to Reverse
several times.Then return steering levers to neutral
position.
11. Shut OFF engine.
12. If wheel is not moving, tighten jam nuts on tie-rod.
The adjustment is complete.
13. If wheel is still moving, repeat steps 7 through 12.
1. Damper Locknut
2. Damper
3. Tie-Rod Jam Nut
4. Tie-Rod
5. Steering Lever
6. Brake Interlock
7. Hydrostatic
Transmission
ADJUSTING THE UNIT TO TRACK
STRAIGHT
WARNING: Prior to adjusting the tracking of
the unit, shut OFF engine, engage parking
brake, and remove the ignition key.
Figure 10
OF3381
Check and adjust tire pressure. Increase pressure on
side unit tracks to. DO NOT exceed maximum
GB - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
If tire pressure adjustment does not solve tracking
problem, adjust the limiter bolts on the stop bracket
(Figure 11). Front bolts adjust forward and rear bolts
adjust reverse. Lengthen the limiter bolt (move closer to
lever) on side which is too fast.
3. Install the spacer, handle, and eccentric spacer in
the appropriate height position. Do not tighten the
nut holding the eccentric spacer.
4. Turn the eccentric spacer until the right and left
handles are the same height. Tighten nut.
ADJUSTING THE PARKING BRAKE
The parking brake might need adjustment over time and
after new brake pads have been installed.
NOTE: After installing new brake pads in the calipers,
they must be burnished by driving for a short distance
(about 100 feet) with the brake on. To do this, bring the
parking brake lever part-way up while driving in a straight
line. This quickly breaks-in the pads for maximum effec-
tiveness
1/16 to 1/8" (1.59
to 3.18 mm)
1-1/2"
(3.81 cm)
OF3572
1. Limiter Bolt
2. Jam Nut
3. Steering Lever
4. Stop Bracket
Figure 11
ADJUSTING THE HEIGHT OF THE
STEERING LEVER HANDLES
The handles have three height positions (Figure 12).
1. Parking Brake Lever
2. Brake Rod
4. Trunnion
5. Spring
3. Return Nuts
6. Jam Nuts
Figure 13
OF3303
Position # 1
Check Adjustment
NOTE: Be sure to check the parking brake on both sides
Position # 2
Position # 3
With the parking brake engaged, the spring length should
measure 1 1/2" (3.81 cm) between the jam nuts and the
trunnion and the clearance between the return nuts and
trunnion should measure 1/16 to 1/8" (1.59 to 3.18 mm).
If either of these measurements is off, adjust the parking
brake appropriately.
1. Spacer
2. Steering Lever
3. Eccentric Spacer
4. Handle
Figure 12
OF3304
Adjust the Parking Brake
1. Engage the parking brake.
1. Shut OFF engine. Engage parking brake. Remove
the ignition key.
2. Turn the jam nuts clockwise to compress the spring
or counterclockwise to extend the spring until there
is 1-1/2" (3.81 cm) clearance between the jam nuts
and trunnion.
2. Remove the spacer, handle, and eccentric spacer
from the steering lever.
NOTE: Position the right and left handles at the same
height position.
3. Tighten jam nuts together.
GB - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Turn the return nuts clockwise to decrease the
distance or counterclockwise to increase the
distance until there is 1/16 to 1/8" (1.59 to 3.18 mm)
between the return nuts and trunnion.
1. Slowly release the tension on the long mower belt
idler until all the tension is removed from the
springs.
2. Remove long mower belt from left blade spindle and
remove from deck.
5. Tighten return nuts together.
3. Slowly release the tension on the short belt idler
until all the tension is removed from the springs.
BELTS
4. Remove short mower belt from right blade spindle
and from deck. Idler pivot bolt must be loosened
slightly to gain clearance to remove belt from under
idler pulley (Figure 15).
WARNING: MOVING PARTS can cut or
amputate body parts. ALWAYS wait for moving
parts to stop before performing maintenance or
service.
5. Arrange new mower belt(s) on deck (short belt first).
Retighten short mower belt idler pivot bolt. Install
belts on sheaves. Put belts onto center sheave last.
CAUTION: DAMAGED OR WORN BELTS may
result in injury and/or damage to unit. Check
belts for excessive wear or cracks often.
6. Replace belt covers and return foot board to closed
position.
Belt Access
2. Lower the mower.
3. Place seat in most rearward position.
4. Remove belt covers.
5. Place foot board in open position (Figure 14).
6. Secure raised footboard with latch.
1. Long Mower Belt
2. Short Mower Belt
3. Springs
4. Short Mower Belt Idler
5. Long Mower Belt Idler
6. Mower Clutch Sheave
7. Center Sheave
Figure 15
1. Footboard in open
position
2. Footboard in closed
position
3. Support Frame
4. Pivot
5. Latch
Replacing the Hydro Pump Belt
2. Remove the long mower belt from the mower clutch
Figure 14
CAUTION: Use care when releasing idler spring
tension. Keep body parts well away from idlers
when performing this operation.
Replacing Mower Belts
NOTE: Long mower belt must be removed to remove
short mower belt.
3. Remove clutch anchor.
CAUTION: Use care when releasing idler spring
tension. Keep body parts well away from idlers
when performing this operation.
4. Slowly release the tension on the hydro pump belt
idler until all the tension is removed from the
springs.
GB - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Remove old hydro pump belt from right hand
Removing the Mower Deck
6. Install new hydro pump belt by positioning belt on
sheaves. Put belt onto right hand hydrostat sheave
last.
2. Remove link chains from mower lift arms. Note hole
location on mower lift arms for replacement.
7. Replace clutch anchor.
3. Remove mower mounting arms from frame.
4. Slide mower deck out from under unit.
8. Replace long mower belt on mower clutch sheave.
1. Hydro Belt
2. Spring
3. Idler
5. Right Hand Hydrostat
6. Left Hand Hydrostat
7. Clutch
1. Mower Lift Arm
2. Link Chain
3. Mower Mounting Arm
4. PTO (Long) Mower
Belt
4. Engine Sheave
8. Clutch Anchor
Figure 16
OF1631
Of0316
Figure 18
MOWER DECKS
Installing the Mower Deck (Figure 18)
1. Slide mower deck under unit.
Adjusting Anti-Scalp Rollers
2. Install mower mounting arms on frame.
The anti-scalp rollers are set at the factory for typical
mowing height, but can be adjusted for high or low cutting
3. Install link chains on the mower lift arms in the
same holes they were removed from.
Rollers are intended to prevent lawn scalping, not to
control cutting height.
For a very high cutting height, set the rollers in their
lowest position on the bracket.
For a very low cutting height, set the rollers in their
highest position on the bracket.
Leveling the Mower Deck
These adjustments should be made on a level surface
with the tires inflated to the correct air pressure.
All rollers should be set at the same height.
The mower is leveled from side to side with the slots
where 4 chains fasten to the mower mounting brackets.
The mower is leveled from front to rear by adjusting the
rod running down each side of the frame (Figure 19).
Lowest
Cutting
Height
1. Shut OFF engine. Engage parking brake. Remove
the ignition key.
Highest
Cutting
Height
2. Raise mower deck and insert 3" (7.6 cm) tall blocks
to support deck.
3. Lower deck onto blocks so chains are slack.
Figure 17
OF3161
GB - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Measure from bottom of mower blade end to
ground.
STORAGE
5. Set hydraulic lift cylinder so cut of height reads the
same as blade height measurement.
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
6. Loosen the locknuts on the side where the chains
are slack and slide the bolt down the slot until the
chain is tight.
SHORT TERM
7. Tighten bolt and nuts in mower mounting brackets.
8. Lift mower and remove blocks.
NEVER spray unit with high pressure water or store unit
outdoors.
9. Measure height of deck at each side.
Measurements must be within 1/16" (1.59 mm) of
each other.
Inspect unit for visible signs of wear, breakage or
damage.
Keep all nuts, bolts and screws properly tightened and
know unit is in safe working condition.
10. If measurements are out of range, fix by adjusting
chains on low side of deck.
Store unit in a cool, dry protected area.
11. Once deck is level side to side, measure height of
deck at middle of front and on both sides of rear.
Front of deck should be 1/8" (3.18 mm) lower than
rear.
LONG TERM
Clean unit thoroughly with mild soap and low pressure
Remove weight from wheels by putting blocks under
frame or axle.
When storing unit for extended periods of time, remove
all fuel from tank and carburetor (run dry). Refer to
Engine Manual.
12. To adjust, loosen rear hex nut of the front mower lift
pivot on each rod.
13. Turn the front hex nut on each rod until mower is
1/8" (3.18 mm) lower in front.
NOTE: If mower cannot be leveled it may be necessary
to loosen the rear nut of the rear mower lift pivot to get
more threads at the front of rod for adjustment. After loos-
ening rear nut and adjusting level, tighten front nut on
rear mower lift pivot.
Clean and charge the battery. Charge battery every three
to four weeks when storing unit.
To Take the Unit Out of Storage
1. Refer to the engine service manual to prepare the
engine for service.
14. Tighten rear hex nut on each rod that was loosened
in step 12.
2. Put fresh, clean fuel in the fuel tank.
3. Begin the maintenance schedule.
4. Charge and install the battery.
Right Side View
Front of Unit
OF3340
NOTE: ALWAYS replace link chains in same holes
they were removed from. Link chain mounting posi-
tions vary by deck size.
1. Rod
6. Mower Mounting
Brackets
7. Front Mower Lift Pivot
8. Rear Mower Lift Pivot
9. Hydraulic Cylinder
2. Rear Hex Nut
3. Front Hex Nut
4. Chains
5. Lock Nuts and Slots
Figure 19
GB - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Description
SERVICE PARTS
Qty Description
Part No.
Part No.
78805300
78803400
78803500
79200300
78805400
78803800
78803900
79201600
79202800
79200400
79202600
79200700
78804100
79202200
79202300
79202700
79202900
89201400
89201600
44" Mulching Kit
08498000
01554800
21537000
21536900
21535800
21397200
09246900
21536100
21525900
21410800
21539500
07241100
07241000
07239300
07202900
07222300
07235000
07218000
04919100
04920600
04936000
04916400
04917900
09246600
08899100
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Parts Manual
48" Mulching Kit
Battery
52" Mulching Kit
Air Filter Outer Element
Air Filter Inner Element
Engine Oil Filter - Kawasaki
Engine Oil Filter - Kohler
Hydraulic Oil Filter
60" Mulching Kit
44" Bahia/Tall Grass Baffle Kit
48" Bahia/Tall Grass Baffle Kit
52" Bahia/Tall Grass Baffle Kit
60" Bahia/Tall Grass Baffle Kit
44", 48", and 52" Discharge Cover
60" Discharge Cover
60" Striper Kit
Spark Plug - Kawasaki
Spark Plug - Kohler
Fuel Filter - Kawasaki
Fuel Filter - Kohler
48", 52", and 60" Tru Power Wheel / Tire Kit
44" and 48" Double Blade Kit
Liftmaster Kit
PTO (Engine to Deck) Belt (44" and 52")
PTO (Engine to Deck) Belt (48")
PTO (Engine to Deck) Belt (60")
Mower Drive Belt (44" and 48")
Mower Drive Belt (52")
Mower Drive Belt (60")
Traction (Hydro Pump) Belt
Blade (44” and 48")
Hitch Kit
Headlight Kit
Counterweight Kit
Rollover Protection System
60" Bagger
Mulch Blade (44” and 48")
Blade (992310, 311)
Blade (52")
Mulch Blade (52")
Blade (60”)
Mulch Blade (60”)
GB - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model Number
Model
992042
144Z
992043
148Z
992044
992051
992054
152Z
992055
160Z
992310
144Z
992311
148Z
152Z
160Z
Length – cm (in)
Height – cm (in)
Width – cm (in)
Weight Actual – kg (lbs)
Battery
184.2 (72.5)
190.5 (75.0)
186.7 (73.5)
191.5 (75.4)
186.7 (73.5)
106 (42)
145 (57)
155 (61)
165 (65)
185 (73)
165 (65)
185 (73)
145 (57)
155 (61)
430 (946)
432 (951)
437 (961)
472.7 (1040)
437 (961)
472.7 (1040)
430 (946)
432 (951)
12 volt
Brakes
Hydro/Dynamic Disk– Parking
Turning Radius
0
Tire SizeFront
Rear
15 x 6 - 6
23 x 9.5 - 12
15 x 6 - 6
23 x 10.5 - 12
15 x 6 - 6
15 x 6 - 6
23 x 9.5 - 12 23 x 10.5 - 12
Engine – manufacturer
Model Number
Cycle
Kawasaki
Kohler
Kawasaki
FH601V
19 (14.1)
FH641V
FH680V
CV730
FH601V
FH641V
4
Engine Power – HP (kW)
@ Governed RPM
21 (15.7)
23 (17.1)
25 (18.7)
18 (13.4)
2800
20.5 (15.3)
3300
Max. Governed RPM
(No Load)
3600
3550
3600
Idle RPM
1800
Starting System
Fuel Tank Capacity
Fuel
Electric
10 gals. US (37.8 liters)
See Engine Manual
Air Cleaner
Heavy Duty Dual Element with Pre-Clean Screen
Air Cooled
Cooling Capacity
Engine oil type
Spark Plug Gap
Transmission
See Engine Manual
See Engine Manual
Hydrostatic Drive
Speed – Forward Max.
Reverse Max.
10 MPH (16 KM/H)
4.5 MPH (7.2 KM/H)
Transmission Lube
Drive Clutch
Mobil 1 15W-50 Synthetic
Hydrostatic
Tire PressureFront
Rear
20-25 psi
12-15 psi
Lift System
Hydraulic
Power Take Off
Electric PTO Clutch/Brake
Cutting Width – cm (in)
Cutting Height – cm (in)
Cut Increments – cm (in)
112 (44)
122 (48)
132 (52)
152 (60)
2.5 - 12.7 (1 - 5)
Infinite between 2.5 - 12.7 (1 - 5)
132 (52)
152 (60)
112 (44)
122 (48)
CE Sound and Vibration
Oper. Ear Sound Pressure
(Lpa) in dBA
NA
90
92
Vibration Measure (m/sec2)
At Operator Hands: X axis
1.4
0.5
0.6
0.2
0.2
0.7
0.3
0.3
0.7
0.93
0.39
1.55
0.29
0.23
0.92
0.35
0.38
0.74
Y axis
Z axis
NA
NA
NA
At Operator Feet: X axis
Y axis
Z axis
At Operator Seat: X axis
Y axis
Z axis
GB - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
2-Year Limited Warranty
Gravely Division of Ariens Company (Gravely) hereby warrants to the
original consumer purchaser that all Gravely Two-Wheel,
Professional G, Pro, and ProMaster products will be free from defects
in material and workmanship for a period of two (2) years from the date
of purchase or 1000 hours, whichever comes first.
Gravely Division of Ariens Company
655 West Ryan Street
P.O. Box 157
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
Protection Plan
Gravely will repair or replace any part found upon examination by
Gravely to be defective. Such repair or replacement will be free of
charge to the purchaser (labor and parts), except as noted below.
This warranty is subject to the following exceptions, conditions, and limitations:
Usage Requirement
The duration of this warranty shall be ninety days or 1000 hours, whichever comes first, if the product is rented or leased.
Purchaser’s Responsibilities
Exclusions (No Warranty)
• The purchaser must perform maintenance and minor
adjustments per the operator’s manual.
• The purchaser must notify Gravely or an authorized Gravely
service representative of the need for warranty service.
• The purchaser must transport the product to and from the place
of warranty repair.
• Normal maintenance, services, and normal replacement items,
such as spark plugs, oil, oil filters, air filters, mufflers, belts,
tires, shoes, runners, scraper blades, shear bolts, mower blades,
mower vanes, headlights, light bulbs, knives, etc. are not covered
by this warranty.
• Any equipment which has been altered, misused, misassembled,
improperly adjusted, neglected, or damaged by accident is not
covered by this warranty.
Product Registration
• Returning the product registration card to Gravely will enable
the company to contact the registrant with repair or replacement
part information.
• Service completed by someone other than an authorized
Gravely dealer is not covered by this warranty.
• Any attachment not approved by Gravely nor any parts that
are not genuine Gravely service parts are not covered by this
warranty.
• Engines and engine accessories are covered only by the
warranty made by the engine manufacturer, and are not covered
by this warranty.
• If the product is equipped with a Hydro-Gear transmission
and/or Hydro-Gear drive components, the Hydro-Gear
transmission and/or drive components are covered only by the
warranty made by Hydro-Gear, and are not covered by this
warranty.
• This warranty applies only to products purchased in the United
States (including Puerto Rico) and Canada. In all other
countries, contact place of purchase.
Service Parts and Accessories
• Service parts and accessories not purchased with the product
covered by this warranty are warranted to be free of defects
for a period of ninety (90) days following the date of purchase,
and will be replaced free of charge (except for labor).
Service
• Warranty service must be done by an authorized Gravely dealer.
To find an authorized Gravely service representative, contact
Gravely at the website, number or address above.
Battery Warranty Prorated
• One to three months - Free replacement
• Four to twelve months - Prorated over 12 months
Gravely may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating
Gravely to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission
that previous designs were defective.
LIMITATION OF REMEDY AND DAMAGES
Gravely’s liability under this express warranty, and under any implied
Gravely makes no warranty other than what is
warranty that may exist, is limited to repair or replacement of any
DISCLAIMER OF FURTHER WARRANTY
expressly made in this warranty. If the law of your
defective part. In no event shall Gravely be liable for incidental,
state provides that an implied warranty of
merchantability, or an implied warranty of fitness
for a particular purpose, applies to Gravely, any
such implied warranty is limited to the duration of
this express warranty.
special, or consequential damages (including lost profits). This
warranty gives you specific legal rights. You may also have other
rights which vary from state to state. Some states do not allow the
exclusion of incidental or consequential damages, or limitations
on how long an implied warranty lasts, so the above limitations
and exclusions may not apply to you.
Form: GLW2-122002
GB - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
GRAVELY
A Division of Ariens Company
655 West Ryan Street
P.O. Box 157
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
Download from Www.Somanuals.com. All Manuals Search And Download.
|