Dakota Digital LED Tail Lights LAT NR221 User Manual

INSTALLATION INSTRUCTIONS  
LAT-NR221  
LED Tail Lights for 1958 Chevy Bel Air/Biscayne  
and 1961-1967 Corvette  
MAN#650209  
Kit Includes:  
Installation:  
1. Remove the two screws and tail light lens.  
2. Remove the light bulb.  
3. Push and twist to remove the plastic wire socket from the back side of the housing.  
4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is  
recommended.  
5. Remove the nut and round metal spacer from the back of the new LED assembly.  
6. Insert the new LED assembly through the hole where the original bulb and connector were.  
Gently pull the wires through the opening to avoid damaging the wire insulation.  
MAN#650209  
10.Cut off the existing light socket as it will not be used. Do not strip the wires. Trim the wires  
from LED assembly to appropriate length, once mounted, making sure wires are routed cleanly  
and securely.  
11.Use the supplied moisture resistant pigtail connectors* to attach the wires from the new LED  
assembly to the existing vehicle harness. Insert appropriate wire from vehicle harness and  
mating LED assembly wire into a connector and crimp following instructions below.  
*For the best connection, soldering is recommended. But to simplify installation, the supplied connectors will  
provide a fast weather resistant connection.  
The correct crimp method for the supplied connectors is:  
1.) Insert UNSTRIPPED wires into the connector and ensure they are all they way in by  
observing the clear bottom of the connector to see the wires are touching the end.  
2.) Use pliers to push the blue cap down flush with the edge of the clear body, completing the  
connection. The connection will only be correct if pressed firmly down with pliers.  
LED wires  
Brown  
Vehicle harness  
Brown or Black  
Green or Pink  
Tail light  
Driver’s Turn  
Green  
Passenger’s Turn  
Ground  
Green  
Black  
Yellow or Purple  
Chassis or body  
12.Repeat for the other side.  
13.Test the tail lights, brake lights, and turn signals. If the turn signals do not flash you will need  
to upgrade your flasher. If you are replacing only the rear turn signals you should be able to  
use a heavy duty electronic flasher from your local parts store. If you are replacing both front  
and rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part number  
LAT-NLF.  
SERVICE AND REPAIR  
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or problems you may be  
having installing one of our units.  
Should you ever need to send the unit back for repairs, please package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel  
Post. Be sure to include a complete description of the problem, your full name and address (street address preferred), and a telephone number where you can be reached during the day.  
An authorization number for products being returned for repair is needed. We will contact you if any repair charges exist. Any returns for warranty work must include a copy of the dated  
invoice or bill of sale.  
LED LIGHTING LIMITED LIFETIME WARRANTY  
DAKOTA DIGITAL (the Company) warrants to the ORIGINAL PURCHASER of this LED Lighting product under normal use and condition, be proven defective in material or  
workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts  
or labor directly related to repairs of the defect(s).  
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of  
defects, transportation prepaid, to the factory. This Warranty is valid for the original purchaser only and may not be transferred.  
This warranty does not cover damage to vehicle electrical system. This Warranty does not apply to any product or part thereof which in the opinion of the Company has been  
damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY, SHALL BE  
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST  
BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES  
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other that  
expressed herein in connection with the sale of this product.  
FOR SERVICE SEND TO: DAKOTA DIGITAL, 4510 W. 61st ST N., SIOUX FALLS, SD 57107 USA (800) 852-3228  
Email us at [email protected]  
MAN#650209  

Aiphone Answering Machine A User Manual
Briggs Stratton VANGUARD 540000 User Manual
Bryant Air Conditoner 533A User Manual
Canon Printer H12 4603 User Manual
Carrier 48SS060 User Manual
Cecilware FTC 10 User Manual
Cornelius Remcor 2849949020 User Manual
Craftsman 7174295 User Manual
Daewoo DWC 121C User Manual
Honeywell MS8120S User Manual