Canon Printer S830D User Manual

S830D  
Start Here  
Photo Printer  
Easy Setup Instructions  
Connect the Printer  
1
Unpack the Printer  
2
Prepare the Printer  
3
Install the Print Head  
4
Install the Ink Tanks  
5
To Your Computer  
1
1
1
1
1
Pull the orange tab off the yellow ink tank  
(BCI-6Y), then remove and discard the  
plastic wrapper.  
Carefully remove all items from the box.  
Remove the shipping tape from the front  
and sides of the printer. Peel off the protective  
film from the LCD panel.  
Remove the print head from its package.  
Turn the printer off.  
IMPORTANT: Be sure the printer is  
off before continuing, or the computer  
will attempt to install the printer  
driver before the printer is ready.  
Protective Film  
2
Connect one end of the USB cable  
to the computer, the other to the printer.  
2
Turn the print head over, then remove  
the orange protective cap.  
S830D  
Photo Printer  
2
Twist off and discard the orange  
protective cap.  
Shipping Tape  
Protective cap  
2
Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.  
Paper Rest  
Output Tray  
NOTE: To avoid spilling ink, never press on  
the sides of an ink tank.  
NOTE: Do not touch the electrical contacts.  
Electrical contacts  
3 Insert the ink tank into the correct slot.  
(Refer to the color guide on the print head.)  
USB Port  
USB Cable  
Press down gently until the ink tank locks  
into place.  
3
Raise the gray lock lever.  
3
Press the POWER button.  
Documentation  
and Software Kit  
POWER  
Lamp  
POWER  
Button  
4
Insert the remaining five ink tanks into  
their assigned slots.  
Direct Interface Cables  
CompactFlash™ Card Adapter  
4
Gently slide the print head into the holder.  
The print head will rest at a slight angle.  
Do not press it down.  
4
Open the front cover. The print head holder  
automatically moves to the center. Remove  
the protective tape.  
Power Cord  
S830D Print Head  
5
Close the front cover and attach the  
paper rest and output tray.  
Continue with Step 6  
on side two.  
5
Lower the lock lever and gently press  
it down until it locks into place.  
Protective tape  
Ink Tanks  
BCI-6C Cyan BCI-6M Magenta  
BCI-6BK Black BCI-6Y Yellow  
Serial number  
Write down the serial number located to  
the right of the print head. You will need  
this later to register the product.  
BCI-6PC Photo Cyan BCI-6PM Photo Magenta  

Canon PIXMA MG8120 User Manual
Cornelius R 404A User Manual
Craftsman 7174290 User Manual
Energizer EV2PC User Manual
Epson Printer C11CC31201 User Manual
Epson T40 User Manual
GE ASV05 User Manual
Havis Shields 1996 2006 Ford Taurus C TCB 10 User Manual
Hisense Group KFR 3201GWE User Manual
HP Hewlett Packard CM8060 User Manual