Brother MFC 3220C User Manual

Before you can use the MFC, you must set up the hardware and install the driver.  
Please read this “Quick Setup Guide” for proper set up and installation instructions.  
Step 1  
Step 2  
Setup is Complete!  
For the latest drivers and to find the best solution for your problem or question, access the Brother  
Solutions Center directly from the driver or go to http://solutions.brother.com  
Keep this “Quick Setup Guide” , User’s Guide and supplied CD-ROM in a convenient place for  
quick and easy reference at all times.  
Getting Started  
Carton Components  
MFC  
3
2
4
Quick Setup Guide  
CD-ROM  
5
6
1
1. Control Panel  
2. Top Cover  
User’s Guide  
3
5
4
ADF Document Support  
Paper Tray  
Accessory Order Form  
6
ADF Document Output Support  
Telephone Line Cord  
Output Paper Support  
Test Sheet  
(USA only)  
One Touch Labels  
Black  
(LC31BK)  
Magenta  
(LC31M)  
Yellow  
(LC31Y)  
Cyan  
(LC31C)  
Ink Cartridges  
Carton components may differ from one country to another.  
Save all packing materials and the carton.  
You must use the appropriate USB cable.  
The interface cable is not a standard accessory. Please purchase an appropriate USB interface cable.  
Use only a USB interface cable that is no longer than 6 feet long (2 meters).  
1
Control Panel  
12  
11  
10  
9
8
7
1
2
3
4
5
6
1. One Touch keys  
2. Shift  
5. Stop/Exit  
6. Start keys  
7. On/Off key  
9. Mode keys  
10. Liquid Crystal Display (LCD)  
11. Copy keys (Temporary Settings)  
12. Print key  
3. Fax and telephone keys  
4. Dial Pad  
8. Navigation keys  
For the details of the control panel, see "Control panel overview" in Chapter 1 of the User’s Guide.  
2
Table of Contents  
3
Setting Up the Machine  
Step 1  
Removing the Protective  
Parts  
Attaching the Paper Tray  
and Supports  
1
2
1 Remove the protective tape.  
1 Insert the paper tray from above into the  
back of the MFC.  
Do NOT connect the USB cable.  
Connecting the USB cable is done  
when installing the driver.  
Paper Tray  
2 Attach the ADF document support.  
2 Open the control panel cover by pulling it  
toward you (1), and then lift the top cover  
toward the back (2).  
ADF Document  
Support  
Top Cover  
Control Panel Cover  
3 Attach the output paper support to the paper  
output slot, and then pull out the extension.  
Output Paper Support  
Output Paper  
Support Extension  
3 Pull the protective yellow bar out of the  
machine.  
Protective Yellow Bar  
4 Attach the ADF document output support.  
ADF Document  
Output Support  
Do not throw away the protective yellow bar.  
You will need it in the future to transport the  
machine.  
4 Close the top cover, and then close the  
control panel cover.  
4
         
3 Loading Paper  
Install Phone Line and  
Power Cord  
4
You can load up to 100 sheets of 20 lb  
(80 g/m2) paper.  
For more details, see “Paper Capacity of  
the Paper Tray” in Chapter 2 of the User’s  
Guide.  
1 Connect the power cord.  
Power Cord  
1 Fan the stack of paper well to avoid paper  
jams and misfeeds.  
2 Connect the telephone line cord.  
Connect one end of the telephone line cord  
to the jack on the MFC marked LINE and the  
other end to a modular wall jack.  
2 Unfold the paper support and then press  
and slide the paper guide to fit the paper  
width.  
Paper Support  
Do not connect the USB cable yet.  
Warning  
Paper Width Guide  
The MFC must be grounded using a 3-prong plug.  
Since the MFC is grounded through the power  
outlet, you can protect yourself from potentially  
hazardous electrical conditions on the telephone  
network by keeping the power to your MFC on  
when you connect it to a telephone line. Similarly,  
you can protect yourself when you want to move  
your MFC by disconnecting the telephone line first  
and then the power cord.  
3
Gently insert the paper.  
Make sure the print side is towards you and  
the paper is below the maximum paper  
mark.  
Maximum Paper Mark  
Paper  
Continued...  
Print Side  
5
   
Setting Up the Machine  
Step 1  
If you are sharing one phone line with an  
external telephone, connect it as shown  
below.  
Installing the Ink  
Cartridges  
5
Warning  
If ink gets in your eyes irrigate them with water  
immediately, and if irritation occurs consult a doctor.  
1 Make sure that the power is turned on.  
The LCD shows;  
Check Cartridge  
2 Open the control panel cover by pulling it  
toward you (1), then lift the top cover  
toward the back (2).  
The print heads will move to the ink  
replacement position.  
If you are sharing one phone line with an  
external telephone answering machine,  
connect it as shown below.  
Top Cover  
Control Panel Cover  
Please set the Receive Mode to “External  
TAD” if you have an external answering  
machine. For more details, see  
“Connecting the machine” in Chapter 1 of  
the User’s Guide.  
TAD  
TAD  
3 Push the four colored ink cartridge covers  
one at a time so they pop up.  
Colored Ink  
Cartridge Covers  
USH  
PUSH  
PUSH  
PUSH  
6
 
4 Remove the white shipping cover by pulling  
7 Gently insert the black ink cartridge in the  
it towards you.  
black ink position.  
White Shipping Cover  
The bottom of the white shipping cover is  
wet with ink that will cause stains, so wipe  
it clean before you place it down.  
Do not throw away the white shipping  
cover. You will need it when you transport  
the machine.  
8 Press the cover down until it clicks.  
5 Take out the black ink cartridge.  
9 Repeat Steps 5 to 8 to install each color ink  
cartridge. Match the colors of the ink to the  
cartridge covers.  
0 Close the top cover and control panel cover.  
The MFC will enter a head cleaning cycle for  
approximately four minutes.  
6 Carefully remove the sealing tape from the  
ink cartridge.  
To prevent spilling ink and staining your  
hands and clothing, peel the sealing tape  
gently and slowly.  
Cleaning  
Please Wait  
Opening  
Continued...  
• Do not touch the ink opening on  
the cartridge or removed tape.  
7
Setting Up the Machine  
Step 1  
• DO NOT remove ink cartridges if  
you do not need to replace them.  
If you do so, it may reduce the ink  
quantity and the MFC will not  
know the quantity of ink left in  
the cartridge.  
Color Block Quality and  
6
Alignment Check  
1 After the cleaning cycle is finished, the LCD  
shows;  
• DO NOT shake theink cartridges.  
If ink stains your body or  
Set Paper and  
Press Start  
clothing, wash with soap or  
detergent immediately.  
2 Make sure the paper is loaded in the paper  
• Brother strongly recommends  
that you do not refill the ink  
cartridges provided with your  
machine. We also strongly  
recommend that you continue to  
use only Genuine Brother Brand  
replacement ink cartridges.  
Using or attempting to use  
potentially incompatible inks  
and/or cartridges in your  
tray.  
Press Color Start.  
3 The MFC starts printing the PRINT  
QUALITY CHECK SHEET (only during  
initial ink cartridge installation).  
machine may cause damage to  
the machine itself and/or it may  
result in unsatisfactory print  
quality. Our warranty coverage  
does not apply to any problem  
that was caused by the use of  
unauthorized third party ink and/  
or cartridges. To protect your  
investment and guarantee your  
print quality please continue to  
replace consumed ink cartridges  
with only Genuine Brother  
Branded Supplies.  
Check in Step A  
Check in Step B  
If you mix the colors by installing an ink  
cartridge in the wrong position, you must  
clean the print head by running several  
cleaning cycles after correcting the  
cartridge installation. (See “Cleaning the  
print head” on page 12-10 of the User’s  
Guide.)  
Once you open an ink cartridge, install it in  
the MFC and use it up within six months of  
installation. Use unopened ink cartridges  
by the expiration date written on the  
cartridge package.  
If Ink Empty shows on the LCD after you  
install the ink cartridges, check to make  
sure the ink cartridges are installed  
correctly.  
8
 
Step A: Color Block Quality  
Check  
Step B: Alignment Check  
1 The LCD shows:  
1 The LCD shows:  
Is Step "A" OK?  
1.Yes 2.No  
Is Step "B" OK?  
1.Yes 2.No  
Check the 600 dpi and 1200 dpi test print to  
see if No.5 most closely matches the OK  
Check the quality of the four color blocks  
formed by the short lines printed on the  
sheet.  
sample (No.0). Press  
if No.5 matches  
it.  
(BLACK/CYAN/YELLOW/MAGENTA)  
2 If all lines are clear and visible, press  
on the dial pad to go to STEP B: Alignment  
Check.  
---OR---  
No.5  
If you can see missing short lines, press  
on the dial pad and go to 3.  
OK  
Poor  
600 DPI  
1200 DPI  
3 The LCD asks you if the print quality is OK  
for each color. Press  
dial pad.  
or  
on the  
If another test print number is a better match  
for either 600 dpi or 1200 dpi, press  
select NO and go to 2.  
to  
Black OK?  
1.Yes 2.No  
2 For 600 dpi, select the number from 1 to 8  
that most closely matches the No.0 sample  
and enter it using the dial pad.  
When you have finished selecting  
(YES) or  
(NO) for each color, the  
LCD shows:  
Select Best #  
Start Cleaning?  
1.Yes 2.No  
3 For 1200 dpi, enter the number from 1 to 8  
that most closely matches the No.0 sample.  
Select Best #  
Press  
(YES), and then MFC starts  
cleaning the colors.  
The Quality check is now complete.  
After cleaning is finished, press  
Color Start. The MFC starts printing the  
PRINT QUALITY CHECK SHEET again  
and goes back to the first step of STEP A.  
9
Setting Up the Machine  
Step 1  
Menu/Set  
Dial pad  
Stop/Exit  
7 Setting the Date and Time  
The MFC displays the date and time, and prints it on  
every fax you send.  
6 Enter the two digits for the day on the dial  
pad, and then press Menu/Set.  
1 Press Menu/Set.  
Day:01  
2 Press  
3 Press  
.
(e.g. Enter 0, 1.)  
.
7 Enter the time in 24-hour format on the dial  
pad, and then press Menu/Set.  
4 Enter the last two digits of the year on the  
dial pad, and then press Menu/Set.  
Time:15:25  
Year:2004  
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)  
8 Press Stop/Exit.  
(e.g. Enter 0, 4 for 2004.)  
5 Enter the two digits for the month on the dial  
pad, and then press Menu/Set.  
If you want to repeat from step1, press  
Stop/Exit.  
Month:03  
(e.g. Enter 0, 3 for March.)  
10  
 
8 Setting Your Station ID  
You should store your name and fax number to be  
printed on all fax pages that you send.  
1 Press Menu/Set.  
2 Press  
3 Press  
.
.
4 Enter your fax number (up to 20 digits) on  
the dial pad, and then press Menu/Set.  
Fax:_  
5 Use the dial pad to enter your name (up to  
20 characters), and then press Menu/Set.  
Name:_  
Refer to the following chart for entering  
your name.  
If you need to enter a character that is on  
the same key as the previous character,  
press  
to move the cursor to the right.  
Press  
key  
2
3
4
5
6
7
One  
time  
A
D
G
J
M
P
T
Two  
times  
B
E
H
K
N
Q
U
Three  
times  
C
F
I
Four  
times  
2
3
4
5
6
S
8
Z
L
O
R
V
Y
8
9
W
X
For more details, see “Setting the Station  
ID” in Chapter 4 of the User's Guide.  
6 Press Stop/Exit.  
If you want to repeat from step1, press  
Stop/Exit.  
11  
 
Setting Up the Machine  
Step 1  
Menu/Set  
Dial pad  
Stop/Exit  
9 Selecting a Receive Mode  
There are four possible receive modes: Fax Only,  
Fax/Tel, Manualand External TAD.  
Are you connecting an external telephone or external  
telephone answering device to the MFC?  
Yes  
No  
1 Press Menu/Set.  
Are you using the voice message  
function of your external  
telephone answering device?  
Fax Only  
2 Press  
3 Press  
4 Press  
.
.
The MFC automatically  
answers every call as a  
fax.  
No  
or  
to select the mode.  
Do you wantthe MFC to  
answer fax calls only?  
5 Press Menu/Set.  
6 Press Stop/Exit.  
Yes  
Fax/Tel  
For more details, see “Setup Receive” in  
Chapter 5 of the User’s Guide.  
The MFC controls the  
line and automatically  
answers every call. If  
the call is not a fax, the  
phone will ring for you to  
pick up the call.  
No  
Manual  
You control the phone  
line and must answer  
every call yourself.  
Yes  
External TAD  
Your external telephone  
answeringdevice(TAD)  
automatically answers  
every call. Voice  
messages are stored on  
the external TAD. Fax  
messages are printed.  
12  
 
10 Selecting Your Language (Canada Only)  
1 Press Menu/Set.  
2 Press  
3 Press  
.
.
4 Select your language (ENGLISH or FRENCH) by using  
or  
, and then press Menu/Set.  
English  
5 Press Stop/Exit.  
Sending in the Product Registration and Test Sheet  
(USA Only)  
11  
1
Fill out the Product Registration and Test Sheet.  
3
Enter the toll-free fax number: 1-877-268-9575.  
4 Press Black Start.  
You will receive a confirmation fax of your  
Product Registration.  
You can also register your product online  
using the On-Line Registration link from the  
installation CD-ROM or go to  
2 Place the sheet face down in the Automatic  
Document Feeder.  
Go to Next page to  
install the driver  
Make sure  
(Fax) is illuminated in Green.  
13  
   
Installing the Driver & Software  
Step 2  
Supplied CD-ROM (MFL-Pro Suite)  
The CD-ROM includes the following items:  
Install Software  
You can install printer, PC-FAX Send, scanner drivers  
®
and the various utility items, includingPaperPort and  
®
TextBridge OCR.  
On-Line Registration  
You will be pointed to the Brother Product Registration  
Web Page for quick registration of your MFC.  
Documentation  
View the User’s Guide and other documentation in  
PDF format. (Viewer included)  
Brother Support  
You can access the Brother Solutions Center which is  
a Web site offering information about your Brother  
product including FAQs, User’s Guides, Driver  
updates and Tips for using your machine.  
Help  
Helpful hints.  
Start Here  
You can install the printer driver, scanner driver,  
®
PC-FAX Send and Presto! PageManager for  
®
Mac OS 8.6 - 9.2  
Documentation  
View the User’s Guide and other documentations in  
PDF format.  
Start Here OS X  
You can install the printer driver, scanner driver,  
PC-Fax Send, remote setup program and  
Presto! PageManager® for Mac OS® 10.1/10.2.1 or  
greater (Scanning is not supported in OS 10.1).  
Brother Solutions Center  
You can access the Brother Solutions Center which is  
a Web site offering information about your Brother  
product including FAQs, User’s Guides, Driver  
updates and Tips for using your machine.  
ReadMe!  
You can get important information and  
troubleshooting tips.  
On-Line Registration  
You will be pointed to the Brother Product Registration  
Web Page for quick registration of your MFC.  
14  
     
Installing the Driver & Software  
Follow the instructions on this page for your operating system.  
Step 2  
®
For Windows 98/98SE/Me/  
®
For Mac OS 8.6 to 9.2 Users.............................. Go to page 24  
®
For Mac OS X 10.1/10.2.1 or greater Users...... Go to page 26  
15  
Installing the Driver & Software  
Step 2  
®
For Windows 98/98SE/Me/2000 Professional/XP Users  
Make sure that you have completed the instructions from Step 1 “Setting Up  
1 Turn off and unplug the MFC from the AC  
outlet and disconnect it from your computer,  
if you already connected an interface cable.  
5 Click MFL-Pro Suite in Main Application.  
MFL-Pro Suite includes Printer Driver,  
Scanner Driver, ScanSoft® PaperPort®,  
ScanSoft® TextBridge®, PC-FAX software,  
Remote Setup and True Type fonts.  
2 Turn on your computer.  
PaperPort® is a document management  
application for viewing scanned originals.  
ScanSoft® TextBridge®, which is integrated  
into PaperPort®, is an OCR application that  
converts an image into text and inserts it into  
your default word processor.  
®
(For Windows 2000 Professional/XP, you  
must be logged on as the administrator.)  
3 Insert the supplied CD-ROM into your  
CD-ROM drive. If the model name screen  
appears, select your machine. If the  
language screen appears, select your  
language.  
6 Click Install.  
4 The CD-ROM main menu will appear.  
Click Install Software.  
If you see the following screen, click OK to  
install the Windows® updates. After the  
updates are installed your PC may restart.  
Note: If it does the installation will  
automatically continue.  
If this window does not appear, use  
Windows® Explore to run the setup.exe  
program from the root directory of the  
Brother CD-ROM.  
If the installation does not continue  
automatically, please open the installer  
menu again by double-clicking the  
setup.exe program from the root directory of  
the Brother CD-ROM, and continue from  
Step 4.  
16  
     
Step 2  
®
®
7 When the PaperPort 8.0 SE Setup window  
is displayed, click Next.  
A When the ScanSoft Registration screen is  
displayed, make your selection and follow  
the on-screen instructions.  
®
8 After reading and accepting the ScanSoft  
License Agreement, enter your user  
B Click Finish to complete installation.  
information and click Next.  
9 Select Typical and click Next.  
C When the Brother MFL-Pro Suite  
Installation window appears, click Next.  
®
0 Click Install and PaperPort will start  
installing on your computer.  
If an error message appears at this point in  
the installation process, you will first have to  
uninstall it. From the Start menu, select  
Programs, Brother, MFL-Pro Suite,  
Uninstall, and then follow the instructions on  
the screen.  
Continued...  
17  
Installing the Driver & Software  
Step 2  
®
For Windows 98/98SE/Me/2000 Professional/XP Users  
D When the Brother Software License  
Agreement window appears, click Yes, if  
you agree to the Software Licence  
Agreement.  
E Select Standard, and then click Next.  
The application files will be copied and  
installed to your computer.  
®
Windows 98/98SE/Me Users  
®
Windows 2000 Professional Users  
®
Windows XP Users  
18  
Step 2  
®
For Windows 98/98SE/Me Users Only  
Make sure that you followed the instructions in 1 to E on pages 16 - 18.  
F When this screen appears, connect the  
USB interface cable to your PC, and then  
connect it to the MFC.  
H Accept the default Printer name by selecting  
Yes, and then click Next.  
Turn on the MFC by plugging in the power  
cord.  
I Select Yes (recommended), and then click  
Finish. A test page will be printed so you  
can check the print quality.  
J If the test page is printed correctly, click  
Yes. If you click No, follow the prompts on  
the screen to correct the problem.  
It will take a few seconds for the installation  
screen to appear.  
The installation of the Brother drivers will  
automatically start. Follow the instructions  
on the screen.  
If the ReadMe3220C.wri file shown in step  
Kappears, close the ReadMe3220C.wri file  
and then click Finish after printing the page.  
G Select BRUSB: USB Printer Port, and then  
click Next.  
Continued...  
19  
   
Installing the Driver & Software  
Step 2  
®
For Windows 98/98SE/Me/2000 Professional/XP Users  
K The ReadMe3220C.wri file will be  
displayed.  
Please read this file for troubleshooting  
information and then close the file to  
continue installation.  
L Click Finish to restart your computer.  
M After the computer restarts, click Yes to  
have the Control Center load each time  
®
Windows is started. The Control Center  
will appear as an icon in the task tray.  
If you click No the Scan keys on the MFC  
will be disabled.  
Even if you select NO, later you will be able  
to launch the Brother Control Center to use  
the Scan key by double clicking the Smart UI  
icon on the desktop. This loads the Brother  
Control Center to the task tray. See  
AutoLoad the Brother Control Center,  
Chapter 4 in the Documentation (Software  
User’s Guide) located on the CD-ROM.  
The Brother PC-FAX, Printer and  
Scanner drivers have been installed  
and the installation is now complete.  
20  
®
For Windows 2000 Professional Users Only  
Make sure that you followed the instructions in 1 to E on pages 16 - 18.  
F When this screen appears, connect the  
USB interface cable to your PC, and then  
connect it to the MFC.  
G If the Digital Signature Not Found dialog  
boxes appear, click Yes to install the driver.  
.
Turn on the MFC by plugging in the power  
cord.  
H The ReadMe3220C.wri file will be  
displayed.  
Please read this file for troubleshooting  
information and then close the file to  
continue installation.  
I Click Finish to restart your computer.  
It will take a few seconds for the installation  
screen to appear.  
The installation of the Brother drivers will  
automatically start. Follow the instructions  
on the screen.  
Continued...  
21  
   
Installing the Driver & Software  
Step 2  
®
For Windows 98/98SE/Me/2000 Professional/XP Users  
J After the computer restarts, click Yes to  
have the Control Center load each time  
®
Windows is started. The Control Center  
will appear as an icon in the task tray.  
If you click No the Scan keys on the MFC  
will be disabled.  
.
Even if you select NO, later you will be able  
to launch the Brother Control Center to use  
the Scan key by double clicking the Smart UI  
icon on the desktop. This loads the Brother  
Control Center to the task tray. See  
AutoLoad the Brother Control Center,  
Chapter 4 in the Documentation (Software  
User’s Guide) located on the CD-ROM.  
The Brother PC-FAX, Printer and  
Scanner drivers have been installed  
and the installation is now complete.  
22  
®
For Windows XP Users Only  
Make sure that you followed the instructions in 1 to E on pages 16 - 18.  
F When this screen appears, connect the  
USB interface cable to your PC, and then  
connect it to the MFC.  
G The ReadMe3220C.wri file will be  
displayed.  
Please read this file for troubleshooting  
information and then close the file to  
continue installation.  
Turn on the MFC by plugging in the power  
cord.  
H Click Finish to restart your computer.  
The Brother PC-FAX, Printer and  
Scanner drivers have been installed  
and the installation is now complete.  
It will take a few seconds for the installation  
screen to appear.  
The installation of the Brother drivers will  
automatically start. The installation screens  
appear one after another, please wait for a  
while.  
23  
   
Installing the Driver & Software  
Step 2  
®
For Mac OS 8.6 to 9.2 Users  
Make sure that you have completed the instructions from Step 1 “Setting Up  
1 Turn off and unplug the MFC from the AC  
outlet and disconnect it from your Macintosh  
if you already connected an interface cable.  
7 Connect the USB interface cable to your  
®
Macintosh , and then connect it to the MFC.  
Do not connect the MFC to a USB  
port on a keyboard or a non powered  
USB hub.  
®
2 Turn on your Macintosh .  
8 Turn on the MFC by plugging in the power  
3 Insert the supplied CD-ROM into your  
cord.  
CD-ROM drive.  
4 Double-click the Start Here icon to install  
the printer, scanner and PC-FAX Send  
drivers. If the language screen appears,  
select your language.  
®
9 From the Apple menu, open the Chooser.  
5 Click MFL-Pro Suite to install.  
6 Follow the on-screen instructions, and  
®
restart your Macintosh .  
24  
 
0 Click the Brother Ink icon you installed. On  
the right side of the Chooser, select the  
printer to which you want to print.  
Close the Chooser.  
The Brother PC-FAX Send, Printer and  
Scanner drivers have been installed.  
®
A To install Presto! PageManager , click the  
®
Presto! PageManager icon and follow on  
the Screen instructions.  
You can easily scan, share and organize  
photos and originals using Presto!  
PageManager®.  
®
Presto! PageManager has been  
installed and the installation is now  
complete.  
25  
Installing the Driver & Software  
Step 2  
®
For Mac OS X 10.1/10.2.1 or greater Users  
Make sure that you have completed the instructions from Step 1 “Setting Up  
1 Turn off and unplug the MFC from the AC  
outlet and disconnect it from your Macintosh  
if you already connected an interface cable.  
7 Connect the USB interface cable to your  
®
Macintosh , and then connect it to the MFC.  
Do not connect the MFC to a USB  
port on a keyboard or a non powered  
USB hub.  
®
2 Turn on your Macintosh .  
8 Turn on the MFC by plugging in the power  
3 Insert the supplied CD-ROM into your  
cord.  
CD-ROM drive.  
4 Double-click the Start Here OS X icon to  
install the printer driver, Scanner driver,  
Brother PC-FAX Send and Remote Setup  
program. If the language screen appears,  
select your language.  
9 Select Applications from the Go menu.  
5 Click MFL-Pro Suite to install.  
0 Open the Utilities folder.  
6 Follow the on-screen instructions, and  
®
restart your Macintosh .  
26  
 
A Open the Print Center icon.  
E Select Quit Print Center from the Print  
Center menu.  
B Click Add Printer....  
The Brother Printer driver, Scanner  
driver, Brother PC-FAX Send and  
Remote Setup Program have been  
installed and the installation is now  
complete.  
®
F To install Presto! PageManager , click the  
®
Presto! PageManager icon and follow on  
the Screen instructions.  
C Select USB.  
You can easily scan, share and organize  
photos and originals using Presto!  
PageManager®.  
D Select MFC-3220C, and then click Add.  
®
Presto! PageManager has been  
installed and the installation is now  
complete.  
27  
Replacement Consumables  
Ink  
Black  
Magenta  
LC31M  
Yellow  
LC31Y  
Cyan  
LC31BK  
LC31C  
Trademarks  
The Brother logo is a registered trademark of Brother Industries, Ltd.  
Brother is a registered trademark of Brother Industries, Ltd.  
Multi-Function Link is a registered trademark of Brother International Corporation.  
© Copyright 2003 Brother Industries, Ltd. All rights reserved.  
Windows, Microsoft and MS-DOS are registered trademarks of Microsoft in the U.S. and other countries.  
Macintosh is a registered trademark of Apple Computer, Inc.  
PaperPort and TextBridge are registered trademarks of ScanSoft, Inc.  
Presto! PageManager is a registered trademark of NewSoft Technology Corporation.  
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its  
proprietary programs.  
All other brand and product names mentioned in this manual are registered trademarks of their respective  
companies.  
Compilation and Publication  
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest  
product descriptions and specifications.  
The contents of this manual and the specifications of this product are subject to change without notice.  
Brother reserves the right to make changes without notice in the specifications and materials contained herein and  
shall not be responsible for any damages (including consequential) caused by reliance on the materials presented,  
including but not limited to typographical and other errors relating to the publication.  
This product is designed for use in a Professional Environment.  
©2003 Brother Industries, Ltd.  
USA  
Version A  

Brother MFC 3340C User Manual
Bryant 701A User Manual
BT paperjet 50 User Manual
Carrier 50LJ User Manual
Cornelius 2232MS User Manual
Danby Premiere DPAC 11010 User Manual
Energizer CHFM8 User Manual
GE AST12 User Manual
Honda Automobiles 2008 Accord Cargo Management User Manual
Honeywell Automobile Parts ALF502R User Manual