Blueair 600 User Manual

Blueair  
500/600 Series  
User Manual  
Blueair 500/600 Series  
Getting started  
General safety instructions  
The Blueair 500/600 Series air purifier is an electrical appliance. Please  
read the safety instructions before use and take the necessary precautions  
to reduce the risk of fire, electric shock or injury. The Blueair Limited  
Warranty applies only if the unit is used according to these instruc-  
tions.  
Use the grounded three-prong power cable provided with your  
Blueair unit. The plug fits into a grounded three-prong outlet. Do  
not alter the plug in any way.  
Use the cable provided to plug the Blueair unit directly into an  
appropriate electrical outlet (please refer to the voltage label on  
your unit). The cable is packaged beneath the unit.  
Placement  
Place the unit in a location that allows air to circulate freely in, out and  
around the unit. The minimum acceptable distance from another object  
is 4˝ or 10 cm. Use only genuine Blueair filters. Do not place the unit:  
Directly on or against soft furnishings, such as bedding or curtains.  
Near sources of heat, such as radiators, fireplaces or ovens.  
Near wet areas, such as bathrooms or laundry rooms, where it may come into  
contact with water.  
Outdoors.  
Settings*  
Plug the cable into a grounded three-prong wall outlet and turn on your  
Blueair unit. The blue light-emitting diode indicates that the unit is working.  
Set the control knob to maximum speed, which is recommended for fast  
initial cleaning, daytime use, or very polluted air. After a few minutes,  
adjust the control to the desired speed. Minimum speed is generally  
recommended for nighttime use.  
Blueair 500/600 Series 3  
Care and maintenance  
Blueair air purifiers feature award-winning Swedish design, materials  
and workmanship. To keep your unit in top condition, we recommend  
routine cleaning.  
Vacuum the air intake grille from the inside when you remove  
the filters to replace them.  
Vacuum the small inlets with a soft brush attachment.  
Wipe the exterior of the unit with a soft, clean, damp cloth.  
Never clean with gasoline, chemical solvents or corrosive material  
also as these agents may damage the surface.  
Do not allow foreign objects to enter the ventilation or exhaust  
openings. This may cause electric shock or damage the unit.  
Do not try to repair or adjust any of the electrical or mechanical  
functions on your Blueair unit yourself. Contact your local  
dealer or Blueair for warranty information.  
How it works  
The filters effectively capture larger airborne particles as the fan motor  
draws air into the unit. Air passes through an ion chamber where airborne  
particles are charged with negative ions. Charged particles are drawn to  
the HEPASilentTM filter surface. Purified air, which is virtually contaminant-  
free is re-circulated into the room.  
Unfiltered air in  
Clean air out  
Airflow output  
Blue “power on” light  
Easy-to-change filters  
– No tools required  
Galvanized steel housing  
Ion brushes  
(no ozone generated)  
Airflow intake  
Fan motor  
Control knob*  
Power source and cord  
*
Blueair 550Eth remote control  
a
and display ol operating speed.  
4 Blueair 500/600 Series  
Getting the most from  
your Blueair system  
The Blueair system is easy to use. Make sure your unit is the right size  
for your room, and change the filters according to recommended filter  
replacement schedule. Remember that, just as air conditioners and  
heaters have limits to the volume of air they can cool or heat, every air  
purification system has limits to the volume of air it can clean. Follow  
these common-sense guidelines.  
Close your windows  
You wouldn’t throw open your windows on a hot summer day and  
expect your air conditioner to work efficiently, because you can feel the  
hot air coming in and the cool air going out. Even though you can’t see  
the contaminated air coming in and the clean air going out, the same  
logic applies to your air purifier.  
Close your doors, too  
Just as you might seal off part of your house on a cold winter night to  
keep your heater working more efficiently, seal off the room in which  
your system is working for best results. This is especially important  
for people using a Blueair system to ease nighttime asthma or allergy  
attacks.  
Run your system ꢀ4 hours per day  
For best results, run your Blueair unit 24 hours a day, 7 days a week.  
Round-the-clock operation ensures that a continuous supply of clean,  
filtered air constantly circulates throughout the room. Blueair systems  
are designed for phenomenally low power usage. In fact, it costs about  
the same to power a Blueair air purifier as it does to power a single light  
bulb, depending on the unit and the operating speed.  
Blueair 500/600 Series 5  
Changing the filters  
Step 1  
Step ꢀ  
Unplug the unit and  
lift the lid from the  
top of the unit.  
Remove the filter  
on top.  
Step 3  
Step 4  
Remove the filters  
on each side.  
Vacuum the grille  
from the inside.  
Guide the first and  
second replace-  
ment filters into the  
side slots. Ensure  
that the side with  
the words “facing  
out” is turned  
toward the outer  
wall of the unit.  
Step 5  
Step 6  
Place the third filter  
on top of the unit  
and ensure that the  
side with the words  
“facing out” is  
Snap the lid back  
into place.  
facing upwards.  
6 Blueair 500/600 Series  
Filters  
Patented HEPASilentTM technology makes the Blueair 500/600 Series  
incredibly quiet. The unit comes with a complete set of three HEPASilentTM  
filters already installed.  
Particle Filter Kit. Includes three particle filters that remove dust, pollen,  
bacteria, pet dander, mold spores and other airborne particles. The  
particle filter is made of polypropylene, which help mechanically filter  
out airborne particles. To maximize filter effectiveness, particles are  
negatively charged by the Blueair unit before reaching the filters.  
SmokestopTM Filter Kit. Includes three filters with enhanced active  
carbon to remove gaseous pollutants such as cigarette and cigar smoke  
or other VOCs (volatile organic compounds, including household paints  
and other chemicals). You may notice a slight odor from the enhanced  
active carbon when the filter is first used; this will quickly dissipate.  
For optimal performance, Blueair recommends that you replace  
filters every six (6) months.  
We offer a convenient Filter Subscription Program in some countries.  
Contact your local dealer or Blueair to find out whether the program is  
available to you.  
IMPORTANT! Use only genuine Blueair filters to ensure proper function  
of your unit and to qualify for full warranty coverage.  
Customer’s record  
The model number and serial number of this product can be found on the bottom of the unit.  
Please note them in the space provided below and keep for future reference.  
Model number  
Serial number  
Date of purchase  
Dealer’s name  
Dealer’s address  
Telephone number  
Blueair 500/600 Series 7  
Our philosophy  
Blueair believes in cleaner indoor air for ev-  
eryone. Removing air impurities down to the  
tiniest particle requires a deep commitment  
to continuous innovation and a greener glob-  
al environment. Our fresh air solutions are  
not only inventive, but extremely effective,  
energy efficient and ecofriendly. At Blueair  
we believe that clean air is a human right.  
Blueair Inc.  
Blueair AB  
17 N. State, Suite 1830, Chicago, IL 6060ꢀ  
Danderydsgatan 11, SE-114 ꢀ6 Stockholm, Sweden  
Phone: (888) blueair (1-888-ꢀ58-3ꢀ47), Fax: (31ꢀ) 7ꢀ7-1153  
info@blueair.com  
Tel: +46-8-679 45 00, Fax: +46-8-679 45 45  
info@blueair.se  

Ackton P5000 User Manual
Aga Ranges 115V User Manual
Allied Air Enterprises 4PGE User Manual
Black Decker START IT 90531551 User Manual
Briggs Stratton 133200 User Manual
Brother MFC 9660 User Manual
BT MANGO User Manual
Carrier REFRIGERANT R 410A User Manual
Cino FUZZYSCAN F760 User Manual
Hans Grohe Axor User Manual