USER’S GUIDE
V:1425-0119-10
IT319
3.1 Channel Home Theater System with Dock for iPod
Download from Www.Somanuals.com. All Manuals Search And Download.
additional Warnings
features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dock plays and charges iPod
• The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on
apparatus.
L'appareil ne doit pas être exposé aux écoulements ou aux écla-
boussures et aucun objet ne contenant de liquide, tel qu'un vase,
ne doit être placé sur l'objet.
HDMI DVD player upconverts to 1080p
3.1 channel speaker system with integrated subwoofer
AM/FM radio with digital tuning
SRS TruSurround XT™
Motorized iPod docking drawer
Remote
2 Composite video inputs
3 RCA stereo inputs
Subwoofer output
Component output
S-Video output
Composite video output
HDMI output
Disc compatibility: DVD, DVD±R/RW, CD, CD-R/RW, JPEG
Preset EQ settings, electronic volume, treble, and bass controls
Wall mountable
Slot-load disc drive with anti-skip function
Station memory presets and last channel memory
Digital clock with timer function
32” wide
• Main plug is used as disconnect device and it should remain read-
ily operable during intended use. In order to disconnect the appa-
ratus from the mains completely, the mains plug should be discon-
nected form the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facile-
ment accessible pendant son utilisation. Pour être complètement
déconnecté de l'alimentation d'entrée, la prise doit être débran-
chée du secteur.
• Battery shall not be exposed to excessive heat such as sunshine,
fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à
la lumière du soleil, au feu ou autres choses de semblable.
AC power: built-in AC cord
• Caution marking is located at the bottom of apparatus.
Les précautions d'emploi sont inscrites en bas de l'appareil.
• The marking information is located at the bottom of apparatus.
What’s included
Les marquages sont inscrits en bas de l'appareil.
•
•
•
•
•
•
IT319
fcc Warnings
AM Loop Antenna
FM Wire Antenna
Wall-mount hardware
Remote & 2 AAA batteries
Documentation
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Powering the unit
Plug the attached AC power cable into a standard AC power outlet.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Powering the remote
The remote control requires 2 AAA batteries (included).
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B
3
Download from Www.Somanuals.com. All Manuals Search And Download.
introduction
Motorized Dock for iPod
Power
DVD/CD Slot-Load Drive
Press to turn the unit off and on.
Volume Button
Press to adjust the volume the unit.
Timer
Press to set the “on” and “off” timer for
the unit.
Source
Press to switch between DVD, iPod, AM
radio, FM radio, Aux, AV 1, and AV 2
mode.
Play/Pause Button
Press to play and pause a docked iPod or
loaded CD/DVD.
Tuning & Skip Buttons
Press to skip tracks on a docked iPod or
loaded CD, skip chapters on a loaded
DVD, or tune the radio.
Stop Button
Press to stop a CD or DVD during play.
Wall-mount Connections
Eject Button
Press to eject a CD or DVD in DVD mode,
or the motorized iPod dock in iPod mode.
Stereo Auxiliary Input
Use to connect an MP3 player or
other audio source to the unit.
HDMI Output (DVD only)
Use to connect the unit to a high
definition display.
FM & AM Antenna Inputs
Use to connect an FM and AM
antenna to the unit.
S-Video Output (DVD or iPod)
Use to connect the unit to a display
using an S-Video cable.
Reset
Press to reset the unit to it’s original
default settings.
Pr
Pb
AUX INPUT
Y
COMPONENT
VIDEO
OUTPUT
SUB
WOOFER
OUTPUT
AV
2
AV
1
OUTPUT
VIDEO IN
VIDEO IN
ANTENNA INPUT
Composite Video Output (DVD,
iPod, or AV Inputs)
Use to connect the unit to a display
using RCA video cables (not
included).
Component Video Output (DVD
only)
Use to connect the unit to a display
using component video cables (not
included).
Subwoofer Output
Use to connect an external
subwoofer to the unit.
AV 1 & AV 2 Inputs
Use to connect a DVD player or
Set-Top Box to the unit.
4
iLive | IT319B
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Mute Button
Press to turn the unit off and on.
Press to mute the volume of the unit.
Sleep
Press repeatedly to set the sleep timer
between 1-90 minutes.
Eject Button
Press to eject a CD or DVD in DVD mode,
or the motorized iPod dock in iPod mode.
POWER
MUTE
iPod DRAWER
Timer
DVD
Press to set the “on” and “off” timer for
the unit.
SLEEP
TIMER
Number Keypad
1
4
2
5
3
Source
Press to switch between DVD, iPod, AM
radio, FM radio, Aux, AV 1, and AV 2
mode.
Playlist Button
Press to cycle through playlists on a docked
iPod.
6
SOURCE
7
Go To Button
8
0
9
Press and enter a specific time using the
Number Keypad to automatically skip to
that time on the loaded DVD.
Preset Buttons
Press to cycle through saved radio stations.
DISPLAY
GOTO
ALBUM
10+
Display Button
Press to view the time when in radio,
DVD, or Aux mode.
Memory Button
Press to save the current radio station to the
unit’s memory.
CHAPTER PLAYLIST
PRESET
Album Buttons
Press to cycle through albums on a docked
iPod.
Clear
MEMORY
SETUP
Chapter Buttons
Press to cycle through chapters on a docked
iPod.
Directional & Select Buttons
Press to move through a docked iPod’s
menus and tune the radio. Press the Select
Button to make selections on a docked
iPod.
Set Up Button
Press to enter the unit’s setup menu. (Must
be in DVD Mode.)
SELECT
TUN
TUN
Program
Repeat Button
Press to program a loaded CD or DVD to
play tracks or chapters in a specified order.
Press to repeat a song, album or playlist
from a docked iPod or a loaded CD or
DVD.
A-B Button
MENU
RETURN
Press once to mark a starting point during
a DVD. Press the button a second time
to mark an ending point. After doing so
the DVD will loop that section of video.
Press the button a third time to cancel this
function.
Return
WIDE
BASS
TREBLE VOLUME
Menu
Press to return to the loaded DVD’s
menu when in DVD Mode. Press to move
backwards through a docked iPod’s menus.
VIDEO
EQ
SLOW
AUDIO
PLAY/PAUSE
LANGUAGE
STOP
REV
STEP
FWD
ANGLE
SHUFFLE
ZOOM
SUBTITLE
TITLE
PREVIOUS
NEXT
HDMI
continued
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B
5
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
MUTE
iPod DRAWER
DVD
SLEEP
TIMER
1
4
2
5
3
6
SOURCE
7
8
0
9
DISPLAY
GOTO
ALBUM
10+
CHAPTER PLAYLIST
PRESET
MEMORY
SETUP
Bass Button
Treble Button
Press to adjust the bass of the unit. (The
unit must be in Music 2.1 or Music 3.1 EQ
mode.)
Press to adjust the treble of the unit. (The
unit must be in Music 2.1 or Music 3.1 EQ
mode.)
SELECT
TUN
TUN
Volume Button
Press to adjust the volume the unit.
Wide
Press and hold to switch between 4:3LB,
4:3PS and 16:9 aspect ratio.
EQ Button
Press to adjust the unit’s preset equalizer
settings. (Details on Page 15)
MENU
RETURN
Video Button
Press to switch between Component or
S-Video output.
Audio Button
Press to adjust the audio language of a
loaded DVD.
WIDE
BASS
TREBLE VOLUME
Play/Pause Button
Press to play and pause a docked iPod or
loaded CD/DVD.
VIDEO
Angle Button
Press to view alternate angles on a playing
DVD. The Angle Button will only work
with compatible DVDs.
EQ
SLOW
AUDIO
Slow Button
Press to view a DVD movie in slow
motion.
PLAY/PAUSE
LANGUAGE
Stop Button
Press to stop a CD or DVD during play.
Subtitle Button
Press to adjust the subtitle language for a
loaded DVD.
STOP
REV
STEP
FWD
ANGLE
SHUFFLE
ZOOM
SUBTITLE
TITLE
Step Button
Press to skip forward through a DVD one
frame at a time.
Shuffle Button
Press to play tracks from a CD or an iPod
in a random order.
PREVIOUS
NEXT
HDMI
Search Buttons
Press to search through an individual track
on a docked iPod, CD, or chapter on a
loaded DVD.
Title Button
Press to return to the title screen of a
loaded DVD.
Skip Buttons
Press to skip through tracks on a docked
iPod, CD, or chapters on a loaded DVD.
HDMI
Press to adjust the output resolution
between 480i, 480p, 720p60, 1080i60, and
1080p60
Zoom
Press to zoom in and out during a DVD
movie.
continued
6
iLive | IT319B
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod oPerations
docking an iPod
Locate the numbered bracket that fits the iPod that
will be docked.
Each included Bracket has a number on it,
indicating which iPod model that bracket is
compatible with. See the separate bracket chart
page to identify which bracket is needed.
Press the Power Button to turn the unit on.
Press the Source Button to switch the unit to iPod
mode.
Press the iPod Drawer Button to open the iPod
motorized door on the unit.
advanced features
Directional & Select Buttons (on remote)
Press to move through a docked iPod’s menus.
Press the Select Button to make selections on a
docked iPod.
Snap the bracket into place over the iPod connector
in the Motorized Dock for iPod.
All Brackets will only fit one way onto the Dock.
When inserting an iPod nano (first or second
generation), slide the Dock connection on the
unit so that it matches the opening on the iPod
nano (first or second generation).
Repeat Button (on remote)
Press to repeat a song, album or playlist from a
docked iPod.
Playlist Button (on remote)
Press to cycle through playlists on a docked iPod.
Connect the iPod to the iPod connector inside the
Motorized Dock for iPod.
Album Buttons (on remote)
Press to cycle through albums on a docked iPod.
Once an iPod is connected to the Motorized Dock
for iPod, the unit will charge the docked iPod.
Chapter Buttons (on remote)
Press to cycle through chapters on a docked iPod.
Playing an iPod
Menu Button (on remote)
Press to move backwards through a docked iPod’s
menus.
Dock an iPod onto the unit by following the
“Docking an iPod” instructions.
Press the Power Button to turn the unit on.
iPod Drawer Button
Press the Source Button to switch the unit to iPod
mode.
Press to open the motorized dock for iPod in iPod
mode.
Press the Play/Pause Button to begin playing a
docked iPod.
Video output from a docked iPod
The included remote control will allow you to
access and play all of the media stored on the
docked iPod from a distance.
A docked iPod can only output video through the
S-Video Output or the Composite Video Output.
To watch video from a docked iPod on a connected
display, the iPod’s TV Out setting must be set to
“On” or “Ask”.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
using the Built-in dVd/cd Player
loading a cd or dVd
LABEL SIDE
IMPORTANT: The CD or DVD must be loaded
with the label side facing in the same direction as
the front of the unit.
Playing a cd or dVd
The unit must be connected to an external display
before viewing a DVD.
Press the Power Button to turn the unit on.
Press the Source Button to switch to DVD Mode.
Load a CD or DVD into the unit.
Press the Play/Pause Button to play the loaded
CD or DVD.
Video output from a loaded dVd
Programming a cd or dVd
Video can be output from a loaded DVD using
any of the available video outputs on the unit.
(Composite, S-Video, Component, or HDMI)
First press the Source Button to switch to DVD
Mode, and load a CD or DVD into the television
Press the Program Button.
Connect the bar speaker to the display using the
desired video output that has a corresponding input
on the display.
Use the Number Keypad to enter in specific titles
and chapters or tracks in the order you want them
to play.
Press the Source Button to switch to DVD Mode.
Press the Directional Buttons to select the
on-screen Start button to begin playing your
programmed DVD.
Load a DVD into the unit.
Press the Play/Pause Button to play the loaded
DVD.
To cancel a set program, press the Program
Button, then use the Directional Buttons to select
Stop then Exit.
HDMI Output (DVD only)
Use to connect the unit to a high
definition display.
S-Video Output (DVD or iPod)
Use to connect the unit to a display
using an S-Video cable.
Pr
Pb
AUX INPUT
Y
COMPONENT
VIDEO
OUTPUT
SUB
WOOFER
OUTPUT
AV
2
AV
1
OUTPUT
VIDEO IN
VIDEO IN
ANTENNA INPUT
Composite Video Output (DVD,
iPod, or AV Inputs)
Component Video Output (DVD
only)
Use to connect the unit to a display
using RCA video cables (not
included).
Use to connect the unit to a display
using component video cables (not
included).
8
iLive | IT319B
Download from Www.Somanuals.com. All Manuals Search And Download.
dVd menu
advanced dVd features
To access the DVD menu, press the Setup Button
(on the remote) in DVD Mode.
Go To Button
Press and enter a specific time using the Number
Keypad to automatically skip to that time on the
loaded DVD.
Set Up Button
Press to enter the unit’s setup menu. (Must be in
DVD Mode.)
Program
Press to program a loaded CD or DVD to play
tracks or chapters in a specified order.
Repeat Button
Press to repeat a song, album or playlist from a
docked iPod or a loaded CD or DVD.
A-B Button
Press once to mark a starting point during a DVD.
Press the button a second time to mark an ending
point. After doing so the DVD will loop that
section of video. Press the button a third time to
cancel this function.
Menu
Press to return to the loaded DVD’s menu when in
DVD Mode.
Video Button
Press to switch between Component or S-Video
Output.
HDMI
Press to adjust the output resolution between 480i,
480p, 720p60, 1080i60, and 1080p60
Angle Button
Press to view alternate angles on a playing DVD.
The Angle Button will only work with compatible
DVDs.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic connectiVity
Below, you’ll see a basic flow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how
the bar speaker connects to them. The following pages contain more detailed instructions on what exactly needs to be done to
make these connections.
AUDIO
HDMI
VIDEO
AUDIO &/Or
VIDEO
AUDIO &/Or
VIDEO
AUDIO
DVD PLAYER
DIGITAL CABLE or SATELLITE TUNER
GAMING CONSOLE
VCR
SUBWOOFER
10 iLive | IT319B
Download from Www.Somanuals.com. All Manuals Search And Download.
connecting a display
connecting a dVd Player or Vcr
You will need: a display, s-video cable or
composite video cable or component video cable or
a HDMI cable.
You will need: a DVD player or VCR, composite
video and RCA stereo cables.
Connect the DVD player or VCR audio and video
outputs to the corresponding Audio and Video
Inputs on the bar speaker.
Connect the display’s video inputs to the
corresponding Video Output on the bar speaker.
Power the bar speaker on and press the Source
Button to switch to a compatible video out source.
(DVD, iPod, AV1, or AV2)
Power the bar speaker on and press the Source
Button to switch to the connected input. (AV1 or
AV2)
Pr
connecting a set-top Box
Pb
Y
You will need: a set-top box, composite video and
RCA stereo cables
COMPONENT
VIDEO
OUTPUT
OUTPUT
N
Connect the set-top box’s audio and video outputs
to the corresponding Audio and Video Inputs on
the bar speaker.
Power the bar speaker on and press the Source
Button to switch to the connected input. (AV1 or
AV2)
connecting a gaming device
You will need: a gaming device, composite and
RCA stereo cables.
Connect the gaming device’s audio and video
outputs to the corresponding Audio and Video
Inputs on the bar speaker.
Power the bar speaker on and press the Source
Button to switch to the connected input. (AV1 or
AV2)
AV 2
VIDEO IN
AV 1
VIDEO IN
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B 11
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
Bar speaker Placement
The bar speaker depends, in part, on it’s
environment to help produce a realistic surround
sound environment. We’ve suggested two potential
placement options in the diagrams below to help
you get the most out of your 3.1 Channel Music
System.
Ventilation
When placing the bar speaker on an entertainment
center, bookshelf, or any time of enclosed space,
be sure to allow at least 2-3 inches of space around
the bar speaker for ventilation. If the bar speaker is
enclosed in a tight space, without ventilation, heat
generated from the bar speaker could produce a
potential heat hazard.
2-3 inches
12 iLive | IT319B
Download from Www.Somanuals.com. All Manuals Search And Download.
mounting the Bar sPeaker
required tools
important notes
•
•
•
•
•
Manual or Power Screwdriver
We recommend having this bar speaker
professionally mounted.
Stud Finder
Pencil
The included spacers should be used at your
discretion to extend the face of the bar speaker
farther from the wall. These are typically used
when mounting the bar speaker under a television,
and the face of the bar speaker needs to be flush
with the face of the television.
Tape Measure
Level
getting started
Use the Tape Measure to decide how high you’d
like to hang the bar speaker on the wall.
Bracket Placement on Wall
The bar speaker must be hung within 6 feet of an
AC power outlet for the attached AC Power Cord
to reach.
WALL
Use the Stud Finder to locate 2 parallel wooden
studs to screw the mounting brackets into.
Wall Mount Brackets
Mark the wall at the center of the studs using the
pencil.
16 inches
Line the level up on both of your marks to make
sure they are level. If they’re not, adjust the marks
as needed to make them level.
After you’ve double checked your markings, drill
through the top hole on both mounting brackets
directly into the marks you’ve made on the wall.
Hanging the Unit
If you are using the brackets only and no spacers,
use the included short screws. If you are using any
of the spacers or combination of the spacers, use
the long screws.
Use the Level to level each of the hanging brackets,
then drill the second screw into the bottom hole on
both mounting brackets.
Slide the bar speaker onto the mounting brackets,
and make sure there is a firm and stable connection
before letting go of the bar speaker.
Finally, use the Level to confirm that the bar
speaker is level.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic oPerations
setting a timer for the unit to Power on
setting the clock
IMPORTANT: This operation cannot be done
from the remote.
IMPORTANT: This operation cannot be done
from the remote.
Press the Power Button to turn the bar speaker on.
Press the Power Button to turn the bar speaker off.
Press and hold the Timer Button until “ON”
Press and hold the Timer Button, the display will
appears on the display.
begin to flash.
While holding the Timer Button, press the Tuning/
Skip Buttons to adjust the hour and minute.
While holding the Timer Button, press the
Tuning/Skip Buttons on the bar speaker to adjust
the hour and minute of the clock.
While holding the Timer Button, press the Volume
Buttons to adjust the volume of the timer.
Release the Timer Button to finish setting the
clock.
While holding the Timer Button, press the Source
Buttons to adjust the source of the timer.
tuning the am or fm radio
Release the Timer Button to finish setting the on
timer. Press the Timer Button to turn the on timer
on or off. “Timer On” will appear on the display
when the timer is activated..
An external AM and FM antenna are included with
the bar speaker. Connect these to the AM and FM
Antenna Inputs on the bottom of the unit before
attempting to use the built-in radio.
setting a timer for the unit to Power off
Press the Power Button to turn the unit on.
Press the Source Button to switch to AM or FM
radio mode.
IMPORTANT: This operation cannot be done
from the remote.
Press the ◄ and ► Directional Buttons on the
Press the Power Button to turn the bar speaker on.
remote to tune the radio.
Press and hold the Timer Button until “ON”
You can also use the Tuning/Skip Buttons on the
appears on the display.
unit to tune the radio.
While holding the Timer Button, press the Power
Button. “OFF” will appear on the display.
saving a radio station to the unit’s memory
While holding the Timer Button, press the Tuning/
Skip Buttons to adjust the hour and minute.
After tuning to the desired AM or FM radio station,
Release the Timer Button to finish setting the off
timer. Press the Timer Button to turn the off timer
on or off. “Timer Off” will appear on the display
when the off timer is activated.
press the Memory Button (on the remote).
Press the ▲ and ▼ Directional Buttons (on the
remote) to select a memory preset (ie. “P01”).
After you have chosen a memory preset, press the
Memory Button to save the selected station to the
selected memory preset.
reseting the Bar speaker
To cycle through preset radio stations, press the
Preset Buttons (on the remote).
If the bar speaker is not responding correctly, try
resetting it.
Using a paperclip or like object, press the Reset
Button on the bottom of the bar speaker. This will
restore the bar speaker to it’s default settings.
14 GPX | TD1510
Download from Www.Somanuals.com. All Manuals Search And Download.
adVanced sound
Built-in sound technologies
If you press the EQ Button on the remote, you can
cycle through the available sound technologies that
are built into the bar speaker.
SRS TruSurround XT® creates
a truly immersive surround sound
experience with rich bass and
clear dialog.
SRS TruSurround XT® -
Dialog Clarity Mode enhances
the vocals so dialog is clear and
easy to understand.
SRS WOW® significantly
improves the playback quality of
audio, delivering a dynamic 3D
entertainment experience with
deep, rich bass.
Music 2.1 delivers the audio through two of the
three speakers and the subwoofer.
Music 3.1 delivers the audio through all three of
the bar speaker’s speakers and the subwoofer.
connecting an external subwoofer
Requires an RCA Audio Cable.
Plug an RCAAudio Cable into the Subwoofer
Output on the bar speaker.
Connect the other end of the RCAAudio Cable into
an external Subwoofer.
The connected external subwoofer will amplify the
lower audio frequency output from the bar speaker.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IT319B 15
Download from Www.Somanuals.com. All Manuals Search And Download.
comPany information
green initiative
Environmental Commitment to ‘Protect for
Today and Sustain for Tomorrow’
2009 marks the official launch of DPI, Inc.’s corporate
campaign for a greener and cleaner world. DPI and its four
brands, iLive, WeatherX, Capri, and GPX, are building
upon environmental initiatives introduced at all of their
facilities to help formulate and sustain significant and
important conservation efforts within its manufacturing and
marketing communities. In addition to targeting and selecting
energy efficient product features, and structuring ‘green
office’ procedures, other initial program efforts include:
•
•
Reduction of all packaging sizes
Recyclable plastics for clamshell packages, with a plan
to eventually replace plastic with recyclable paper
Recycled fiber board in place of the
polyfoam in packing boxes
Recycled plastics in place of the virgin
material in product construction
•
•
international support
To download this User’s Guide in English, Spanish, or
Para transferir esta guía de usuario en inglés, español, o
Pour télécharger ce guide de l’utilisateur en anglais, espagnol,
contact information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: [email protected]
Parts Email: [email protected]
© 2009 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners. Specifications are subject to
change without notice
and
are trademarks of SRS Labs, Inc. TruSurround XT and WOW technologies are incorporated under license from SRS Labs, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|