NOTE:
Please read all instructions
carefully before using this
product
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
IGS-04
LEG CURL/EXTENSION BENCH
Warranty
Ordering Parts
Model
IGS-04
Retain This
Manual for
Reference
02-28-02
OWNER'S
MANUAL
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE
OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES
NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE
SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench, Allen Wrench and
Hammer
NOTE: It is strongly recommended this machine to be assembled by two or more
people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Stabilizer (#11) to the Seat Support (#2). Secure it with two M10 x 3 ½”
Carriage Bolts (#32), ∅ ¾” Washers (#31) and M10 Aircraft Nuts (#35).
B.) Attach the Main Frame (#3) to the other end of Seat Support (#2). Secure it with two
M10 x 3 ½” Carriage Bolts (#32), ∅ ¾” Washers (#31) and M10 Aircraft Nuts (#35).
Do not tighten the nuts and bolts yet.
C.) Attach the Cross Brace (#1) to the Seat Support (#2). Secure it with two M10 x 2 ¾”
Carriage Bolts (#46), ∅ ¾” Washers (#31), and M10 Aircraft Nuts (#35).
D.) Attach the Spring (#15) to the Stopper (#16). Push the Stopper into the hole on the
post on the Main Frame. Align the slot on the Stopper with the open slot on the post.
Insert the Lever (#5) through the open slot on the post into the slot on the Stopper.
E.) Attach the Cross Brace (#1) to the Main Frame (#3). Secure it with two M10 x 2 ¾”
Carriage Bolts (#46), ∅ ¾” Washers (#31), and M10 Aircraft Nuts (#35). Tighten all
nuts and bolts previously installed.
DIAGRAM 1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2 (See Diagram 2)
A.) Slide a ∅ 1 ½” Plastic Spacer (#49) onto the Axle on the Adjustment Plate (#4). Insert
the Axle through the Pivot Barrel on the Main Frame. Slide another Spacer onto the
Axle.
B.) Slide the Weight Holder (#7) onto the Axle and align the holes. Insert a Roll Pin (#12)
through the hole and drive it in with a hammer.
C.) Attach the Leg Developer Frame (#19) onto the Axle on the Adjustment Plate (#4).
Secure it with one M10 x ¾” Allen Bolt (#28) and ∅1 3/8” Washer (#27).
D.) Slide the Knee-lock Frame (#13) onto the pivot axle on the Main Frame. Secure it with
one M10 x ¾” Allen Bolt (#28) and ∅1 3/8” Washer (#27).
E.) Attach the open bracket on the Handle (#6) to the Seat Support (#2). Secure it with two
M10 x 2 ¾” Carriage Bolts (#46), ∅ ¾” Washers (31), and M10 Aircraft Nuts (#35).
DIAGRAM 2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3 (See Diagram 3)
A.) Attach the Seat Pad (#18) to the Seat Support (#2). Secure it with four M8 x 2 1/8” Allen
Bolts (#52) and ∅ 5/8” Washers (#43).
B.) Attach the Backrest Board (#9) to the Backrest Adjustment Frame (#8). Secure it with two
M8 x 1 3/8” Allen Bolts (#48) and ∅ 5/8” Washers (#43). Insert the Backrest Adjustment
Frame (#8) into the opening on the Seat Support (#2). Secure it with a Lock Knob.
C.) Slide a ∅ 2” Washer (#10) onto the tube on the Knee-lock Frame (#13). Push the 18”
Roam Roll (#14) onto the tube. Secure it with a ∅ 2 1/8” Nylon Washer (#21) and a M10 x
¾” Allen Bolt (#28).
D.) Repeat Step C above to install the other 21” Foam Roll (#20).
E.) Attach the Olympic Sleeve (#38) onto the Weight Holder (#7). Clip the Spring Clip (#40)
onto the Olympic Sleeve.
DIAGRAM 3
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
KEY NO.
DESCRIPTION
Cross Brace
Q’ty
1
1
2
Seat Support
1
3
Main Frame
1
4
5
Adjustment Plate
Lever
1
1
6
Handle
1
7
Weight Holder
1
8
9
Backrest Adjustment Frame
Backrest Board
∅ 2” Washer
1
1
2
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
Stabilizer
Roll Pin
1
1
1
1
1
1
1
1
1
2
1
1
2
2
4
2
4
2
2
10
4
4
4
10
1
1
1
1
1
2
3
11
3
3
6
Knee-lock Frame
Knee-lock Foam Roll (18”)
Spring
Stopper
Bumper
Seat Pad
Leg Developer Frame
Leg Developer Foam Roll (21”)
∅ 2 1/8” Nylon Washer
Lever Handle
Lever Knob
T-shaped Pull Pin
Roller Wheel
Bearing
∅ 1 3/8” Washer
M10 x ¾” Allen Bolt
Handle Grip
Sleeve
∅ ¾” Washer
M10 x 3 ½” Carriage Bolt
2” x 2 ¾” Horse Shoe End Cap
M10 x 1” Round Allen Bolt
M10 Aircraft Nut
Lock Knob
M8 x ½” Screw
Olympic Sleeve
Olympic Sleeve End Cap
Spring Clip
Spring Clip Sleeve
M8 x 1 5/8” Allen Bolt
∅ 5/8” Washer
2” Square End Cap
1 ¾” Square End Cap
M10 x 2 ¾” Carriage Bolt
1” Square End Cap
M8 x 1 3/8” Allen Bolt
∅ 1 ½” Plastic Spacer
M8 Aircraft Nut
2” x 2” End Cap
M8 x 2 1/8” Allen Bolt
4
2
2
2
1
4
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IRON GRIP SPORT
By IMPEX FITNESS PRODUCTS
LIMITED LIFE TIME WARRANTY
IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3
YEARS on parts, and 6 MONTHS on upholstery from the date of purchase. This warranty extends only to the
original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's
option.
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer
Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the
customer. This warranty does not extend to any product or damage to a product caused by or attributable to
freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized
service center or for products used for heavy commercial or rental purposes. No other warranty beyond that
specifically set forth above is authorized by IMPEX.
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in
connection with the use or performance of the product or other damages with respect to any economic loss,
loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other
consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal right. You may also have other rights which vary from state to state.
IMPEX INC.
14777 Don Julian
City of Industry, CA 91746
ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899
during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time.
When ordering replacement parts, always give the following information.
1.
2.
3.
4.
Model
Description of Parts
Part Number
Date of Purchase
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|