®
Patent Pending
Model No. IMTL07610
Serial No.
USER'S MANUAL
Write the serial number in the space
above for future reference.
Serial Number Decal
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
we will guarantee complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this man-
ual for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor,
see your local IMAGE dealer or call 1-800-999-
3756 and order part number 146148.
2. Use the treadmill only as described.
12. Keep the power cord and the surge suppres-
sor away from heated surfaces.
3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread-
mill is not working properly.)
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 300 pounds.
16. The heart rate monitor is not a medical de-
vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in-
tended only as an exercise aid in determining
heart rate trends in general.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
17. When using iFIT.com CD’s and videos, an
electronic “chirping” sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
“chirp” and be prepared for speed and/or in-
cline changes. In some instances, the speed
and/or incline may change before the per-
sonal trainer describes the change.
10. When connecting the power cord (see page 8),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit.
18. When using iFIT.com CD’s and videos, you can
manually override the speed and incline set-
tings at any time by pressing the speed and in-
cline buttons. However, when the next “chirp”
is heard, the speed and/or incline will change
to the next settings of the CD or video program.
11. Use only a single-outlet surge suppressor
that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppres- 19. Always remove iFIT.com CD’s and videos from
sor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dis-
sipation of 450 joules. The surge suppressor
your CD player or VCR when you are not using
them.
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)
24. Never drop or insert any object into any open-
ing.
25.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
21. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
AND MOVE THE TREADMILL on page 24.) You
must be able to safely lift 45 pounds (20 kg) in
order to raise, lower, or move the treadmill.
26. This treadmill is intended for in-home use
only. Do not use the treadmill in a commer-
cial, rental, or institutional setting.
22. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
23. Inspect and tighten all parts of the treadmill
every three months.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decal shown below has been placed on the treadmill. If the
decal is missing, or if it is not legible, please call our Customer
Service Department, toll-free, to order a free replacement decal (see
ORDERING REPLACEMENT PARTS on page 31). Apply the decal in
the location shown.
Note: The decal is shown at 38% of actual size.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the IMAGE® 12.0Q treadmill.
The IMAGE 12.0Q treadmill combines advanced tech-
nology with innovative design to let you enjoy an effec-
tive form of cardiovascular exercise in the convenience
and privacy of your home. And when you’re not exer-
cising, the unique IMAGE 12.0Q can be folded up, re-
quiring less than half the floor space of other treadmills.
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is IMTL07610. The serial num-
ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Reading Rack
Water Bottle
Holder (Bottle
not included)
Accessory Tray
Handrail
Upright
Key/Clip
Lock Knob
On/Off Switch
Circuit Breaker
Walking Belt
Foot Rail
Power Cord
Rear Roller
Adjustment Bolt
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. A rubber mallet
may be needed for
assembly.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
1
Uprights (65) until the treadmill is in the position shown.
65
2. Press the Lock Knob Sleeve (68) into the left Upright
2
(65). If necessary, use a rubber mallet to tap the Lock
Knob Sleeve into the Upright.
Remove the Lock Knob (67) from the Lock Pin (72).
65
Make sure that the Lock Pin Collar (70) and the Spring
(69) are on the Lock Pin. (Note: If there are two Lock Pin
Collars, place one on each side of the Spring.) Insert the
Lock Pin into the Lock Knob Sleeve (68) and the left
Upright (65), and tighten the Lock Knob onto the Lock
Pin.
72
67
70
68
69
3. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see pages 25 and 26). To protect the floor
or carpet from damage, place a mat under the treadmill.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
dried. If the heart rate monitor is not dried after each
use, it may remain activated longer than necessary,
draining the battery prematurely.
The heart rate monitor consists of two components:
the chest strap and the sensor unit (see the drawing
below). Insert the tab on one end of the chest strap
through the hole in one end of the sensor unit. Press
the end of the sensor unit under the buckle on the chest
strap. The tab should be almost flush with the front of
the sensor unit.
• Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.
• Do not expose the heart rate monitor to direct
sunlight for extended periods of time; do not expose
it to temperatures above 122° Fahrenheit (50°
Celsius) or below 14° Fahrenheit (-10° Celsius).
• Do not excessively bend or stretch the sensor unit
when using or storing the heart rate monitor.
Chest Strap
Tabs
• Clean the sensor unit using a damp cloth—never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
Buckle
HEART RATE MONITOR TROUBLE-SHOOTING
Sensor Unit
Tab
The instructions on the following pages explain
how the heart rate monitor is used with the console.
If the heart rate monitor does not function properly,
try the steps below.
Next, wrap the
heart rate monitor
around your chest
and attach the
other end of the
chest strap to the
sensor unit. Adjust
the length of the
chest strap, if nec-
essary. The heart
rate monitor
• Make sure that you are wearing the heart rate moni-
tor exactly as described at the left. Note: If the heart
rate monitor does not function when positioned as
described, try moving it slightly higher or lower on
your chest.
• Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the
sensor unit. If heart rate readings do not appear until
you begin perspiring, re-wet the electrode areas.
should be under
your clothing, tight against your skin, and as high
under the pectoral muscles or breasts as is comfort-
able. Make sure that the logo on the sensor unit is fac-
ing forward and is right-side-up.
• As you walk or run on the treadmill, position your-
self near the center of the walking belt. For the
console to display heart rate readings, the user
must be within arm’s length of the console.
Pull the sensor unit away from your body a few inches
and locate the two electrode areas on the inner side.
The electrode areas are the areas covered by shallow
ridges. Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.
• The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contrac-
tions (pvcs), tachycardia bursts, and arrhythmia.
• The operation of the heart rate monitor can be
affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.
HEART RATE MONITOR CARE AND MAINTENANCE
• Thoroughly dry the heart rate monitor after each
use. The heart rate monitor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the heart rate monitor shuts off
when it is removed and the electrode areas are
• The CR2032 battery may need to be replaced (see
page 27).
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
1
HOW TO PLUG IN THE POWER CORD
Grounded Outlet Box
Surge Suppressor
Grounding Pin
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
Grounding Pin
Grounded Outlet
Grounding Plug
installed by a qualified electrician.
2
Grounded Outlet Box
Adapter
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).
Surge Suppressor
Lug
Metal Screw
To purchase a surge suppressor, see your local
IMAGE dealer or call 1-800-999-3756 and order part
number 146148. Use only a single-outlet surge sup-
pressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCI-equipped outlets.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAM OF THE CONSOLE
A
B
C
E
F
D
L
G
H
I
J
K
N
O
P
Q
Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.
M
FEATURES OF THE CONSOLE
CD programs automatically control the speed and in-
cline of the treadmill as a personal trainer guides you
through every step of your workout. High-energy music
provides added motivation. Each CD features two pro-
grams designed by certified personal trainers.
The treadmill console offers an impressive array of
features to help you get the most from your workouts.
When the console is in the manual mode, the speed
and incline of the treadmill can be changed with a
touch of a button. As you exercise, the console will
display instant exercise feedback—you can watch your
progress on the LED track while the four displays show
your heart rate, the numbers of calories and fat calo-
ries you have burned, the distance you have walked,
the incline level of the treadmill, the number of laps
completed, your speed, your pace, and workout time.
In addition, you can connect the treadmill to your VCR
and TV and play iFIT.com video programs (videocas-
settes are available separately). Video programs offer
the same benefits as iFIT.com CD programs, but add
the excitement of working out with a class and an in-
structor—the hottest new trend at health clubs.
With the treadmill connected to your computer, you
access basic programs, audio programs, and video
programs directly from the internet. And by adding an
optional upgrade module to the console, you can use
virtually endless features from our Web site. See
The console also offers four performance programs
and two total-body workout programs. Each program
automatically controls the speed and incline of the
treadmill as it guides you through an effective workout.
The total-body workout programs also prompt you to
use hand weights (not included) for upper-body exer-
cise. (To purchase hand weights, refer to page 23.)
Two heart rate programs are also featured. Each pro-
gram controls the speed and incline of the treadmill to
keep your heart rate near a target level during your
workouts.
To purchase iFIT.com CD’s, iFIT.com videocas-
settes, or an upgrade module, call toll-free 1-800-
735-0768. To purchase hand weights, refer to page
23.
To use the manual mode of the console, follow the
steps beginning on page 11. To use a performance
program or a total-body workout program, refer to
page 13. To use a heart rate program, see page 14.
To create or use a user-defined program, see page
16 or 17.
The console even allows you to create user-defined
programs and store them in memory for future use.
The console also includes built-in iFIT.com technology.
iFIT.com technology is like having a personal trainer
right in your home. Using the included audio cable,
you can connect the treadmill to your home stereo,
portable stereo, or computer and play special iFIT.com
CD programs (CD’s are available separately). iFIT.com
To use iFIT.com CD or video programs, refer to
page 21. To use iFIT.com programs directly from
our Web site, see page 22.
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAM OF THE CONSOLE
G. Heart rate program profiles—These profiles show
how the target heart rate will change during heart
rate programs.
Refer to the drawing on page 9. Note: The console
can display exercise feedback in either miles or
kilometers. For simplicity, all instructions in this
manual refer to miles.
H. Incline buttons—These buttons control the incline of
the treadmill. The incline range is 0% to 10%.
A. Pulse/Cals/Fat Cals display—This display shows
the numbers of calories and fat calories you have
burned (see BURNING FAT on page 28). This dis-
play will also show your heart rate when you wear
the heart rate monitor.
I. Small + and – buttons and Enter button—These
buttons are used to enter your age and maximum
heart rate settings for heart rate programs.
J. Stop button—This button is used to stop the walking
belt.
B. Dist./Incline/Laps display—This display shows the
distance you have walked, the number of 1/4-mile
laps you have completed, and the incline level of
the treadmill. Note: Each time an Incline button is
pressed, the display will show the incline setting.
K. Performance program profiles—These profiles
show how the speed and incline of the treadmill will
change during performance programs.
L. Program button—This button is used to select the
manual mode, performance programs, total-body
workout programs, heart rate programs, user-
defined programs, and the iFIT.com mode. Note:
If the walking belt is moving when the Program but-
ton is pressed, the walking belt will slow to a stop
and the displays will be reset.
C. Program display—When the manual mode or the
iFIT.com mode is selected, this display will show
your progress on an LED track. When a perfor-
mance program, a total-body workout program, a
heart rate program, or a user-defined program is
selected, the display will show the program’s speed
or heart rate settings.
M. Key with clip—The key turns the console on and off.
The clip is designed to be worn on the waistband of
your clothes.
D. Hand Weight display—During the two total-body
workout programs, this display will prompt you to
use hand weights (not included) for upper-body
exercise as you walk on the treadmill.
N. Start button—This button is used to start the walking
belt.
E. Speed/Pace display—This display shows the
speed of the walking belt and your current pace
(pace is measured in minutes and seconds per
mile). Note: Each time a Speed button is pressed,
the display will show the speed setting.
O. Mode indicators—These indicators show whether
the manual mode, a performance program, a total-
body workout program, a heart rate program, a
user-defined program, or the iFIT.com mode is se-
lected.
F. Time/Segment Time display—When the manual
mode or the iFIT.com mode is selected, this display
will show the elapsed time. When a performance
program, a total-body workout program, a heart
rate program, or a user-defined program is selected,
the display will show both the time remaining in the
program and the time remaining in the current period
of the program.
P. Total-body workout program profiles—These pro-
files show how the speed and incline of the tread-
mill will change during total-body workout programs.
Q. Speed buttons—These buttons control the speed
of the walking belt. The speed range is 0.5 mph to
10 mph. Note: When the Start button is pressed,
the walking belt will begin to move at 1.0 mph.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MANUAL MODE
WARNING:
To reduce the risk of
serious injury, read the following precautions
before operating the console.
Put on the heart rate monitor if desired.
1
• Do not stand on the walking belt when turn-
ing on the power or starting the walking belt.
For the Pulse/Cals/Fat Cals display to show your
heart rate, the heart rate monitor must be worn. To
put on the heart rate monitor, refer to HOW TO
USE THE HEART RATE MONITOR on page 7.
• Always wear the clip (see part “M”on page 9)
securely on the waistband of your clothing
while using the treadmill. If the key is pulled
from the console, the walking belt will stop.
Insert the key fully into the console.
2
3
Refer to HOW TO TURN ON THE POWER at the
left.
• The treadmill is capable of high speeds.
Adjust the speed in small increments.
Select the manual mode.
• The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
When the key is
inserted, the man-
ual mode will au-
tomatically be se-
lected and the
manual indicator
will light. If a pro-
gram has been selected, press the Program but-
ton repeatedly to select the manual mode again.
• If you have heart problems, or if you are over
60 years of age and have been inactive, do
not use the heart rate programs. If you are
taking medication regularly, consult your
physician to find whether the medication will
affect your exercise heart rate.
Press the Start button to start the walking belt.
4
• To reduce the risk of electric shock, keep
liquids away from the console; use only a
sealed water bottle.
When the Start button is pressed, the LED track in
the center of the console will disappear in a coun-
terclockwise direction. One flashing indicator will
then appear and the walking belt will begin to
move at 1.0 mph. Hold the handrails and begin
walking.
HOW TO TURN ON THE POWER
The LED track rep-
resents a distance
of 1/4 mile. As you
exercise, the indica-
tors around the
track will light in se-
quence until the en-
tire track is lit. The
Make sure that the on/off
switch, located on the
On
Position
front of the treadmill, is in
the on position. Next,
make sure that the power
cord is properly plugged
in (see page 8).
track will then disappear in a counterclockwise di-
rection and a new lap will begin.
Stand on the foot rails
of the treadmill. Find the
clip attached to the key
and slide the clip onto the
waistband of your
clothes. Next, insert the
key fully into the console.
After a moment, various
displays and indicators will light. Test the clip by
carefully taking a few steps backward until the key
is pulled from the console. If the key is not pulled
from the console, adjust the position of the clip as
needed. Then, re-insert the key fully into the console.
To stop the walking belt, press the Stop button. All
displays will pause and the Time/Segment Time
display will begin to flash. To restart the walking
belt, press the Start button. To stop the walking
belt and reset the displays, press the Stop button,
remove the key, and then reinsert the key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If the speed is displayed in miles per hour,
the distance will be displayed in miles; if the
speed is displayed in kilometers per hour, the dis-
tance will be displayed in kilometers.
Adjust the speed and incline of the treadmill.
5
While the walking belt
is moving, adjust the
speed of the walking
belt by pressing the
Speed/Pace display—
This display shows the
Speed + and – but-
speed of the walking
tons. Each time a but-
belt and your current
pace (pace is mea-
sured in minutes and
seconds per mile). The speed indicator will light
when the speed is shown; the min:sec/mile indica-
tor will light when your pace is shown. Note: Each
time a Speed button is pressed, the display will
show the speed setting.
ton is pressed, the speed will change by 0.1 mph.
If a button is held down, the speed will change in
increments of 0.5 mph. To change the speed set-
ting quickly, press one of the ten Quick Speed
buttons. The speed range of the walking belt is
0.5 mph to 10 mph. Note: After a button is
pressed, it may take a moment for the treadmill to
reach the selected speed setting.
Note: The speed can
To further vary the in-
be displayed in either
tensity of your exer-
miles per hour or kilo-
cise, adjust the incline
meters per hour. To
of the treadmill with
see which unit of mea-
the Incline buttons.
surement is selected,
Each time a button is
first hold down the Stop button while inserting the
key into the console. The Speed/Pace display will
show an “E” for English (miles) or an “M” for metric
(kilometers). Press the Speed + button to change
the unit of measurement. Then, remove and rein-
sert the key.
pressed, the incline will change by 0.5%. The in-
cline range is 0% to 10%. Note: After a button is
pressed, it may take a moment for the treadmill to
reach the selected incline setting.
Follow your progress with the four displays.
6
Time/Segment Time
display—When the
manual mode or the
iFIT.com mode is se-
lected, this display will
show the elapsed time.
Pulse/Cals/Fat Cals
display—This display
shows the numbers of
calories and fat calo-
ries you have burned
(see BURNING FAT
When a performance program, a total-body work-
out program, a heart rate program, or a user-de-
fined program is selected, this display will show
both the time remaining in the program and the
time remaining in the current period of the pro-
gram, as shown by the time indicator and the seg-
ment time indicator.
on page 28). The fat cals indicator will light when
the number of fat calories is shown. This display
will also show your heart rate when the heart rate
monitor is worn. The pulse indicator will flash each
time a heartbeat is detected. Note: It may take
several seconds before an accurate heart rate is
shown. If your heart rate is not shown, refer to
HEART RATE MONITOR TROUBLE-SHOOTING
on page 7.
When you are finished exercising, stop the
walking belt and remove the key.
7
Dist./Incline/Laps
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
level. Next, remove the key from the console and
put it in a secure place. Note: If the displays and
indicators on the console remain lit after the
key is removed, the console is in the “demo”
mode. Refer to page 23 and turn off the demo
mode.
display—This display
shows the distance
you have walked, the
number of 1/4-mile
laps you have com-
pleted, and the incline level of the treadmill. The
dist. or laps indicator will light when the distance
or the number of laps is shown. Note: Each time
an Incline button is pressed, the display will show
the incline setting.
Next, move the on/off switch near the power cord
to the off position.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
One speed
Current Period Column
HOW TO USE A PERFORMANCE PROGRAM
OR A TOTAL-BODY WORKOUT PROGRAM
setting and one
incline setting
are pro-
grammed for
each period.
The speed set-
ting for the first
period is
Put on the heart rate monitor if desired.
1
Refer to step 1 on page 11.
Insert the key fully into the console.
shown in the
2
3
flashing Current Period column of the program
display. (The incline settings are not shown in the
program display.) The speed settings for the next
seventeen periods are shown in the seventeen
columns to the right.
Refer to HOW TO TURN ON THE POWER on
page 11.
Select one of the performance programs or
total-body workout programs.
When only three seconds remain in the first period
of the program, both the Current Period column
and the column to the right will flash and a tone
will sound. In addition, if the speed and/or incline
of the treadmill is about to change, the
When the key is
inserted, the
manual mode will
be selected and
the manual indi-
cator will light.
Press the
Program button repeatedly until one of the four
performance program indicators or one of the two
total-body workout program indicators lights.
Speed/Pace display and/or the Dist./Incline/Laps
display will flash to alert you, and three tones will
sound. When the first period is completed, all
speed settings will move one column to the left.
The speed setting for the second period will then
be shown in the flashing Current Period column
and the treadmill will automatically adjust to the
speed and incline settings for the second period.
The profiles on the console show how the speed
and incline of the treadmill will change during the
programs. The numbers at the left ends of the
profiles show the maximum speed and incline set-
tings for the programs.
Note: If a total-body workout program is selected,
one or more indicators will be lit in the Hand
Weight display (above the program display). At
the end of each period, the indicators in the Hand
Weight display will also move one column to the
left. When a lit indicator in the Hand Weight dis-
play is above the flashing Current Period column
of the program display, the indicator will begin to
flash. While the indicator is flashing, use hand
weights (not included) for upper-body exercise, if
desired.
When a pro-
gram is se-
lected, the
program dis-
play will show
a simplified
profile of the
program.
Press the Start button to start the program.
4
WARNING:
Using hand
weights and not holding the handrails may
compromise your ability to maintain your
balance. Hand weights should be used only
by experienced users.
A moment after the button is pressed, the treadmill
will automatically adjust to the first speed and in-
cline settings for the program. Hold the handrails
and begin walking.
Each program is divided into several time periods
of different lengths. (The Time/Segment Time dis-
play shows both the time remaining in the program
and the time remaining in the current period.)
The program will continue until the speed setting
for the final period is shown in the Current Period
column and the Time/Segment Time display
counts down to zero. The walking belt will then
slow to a stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Each time a period ends and the speed set-
tings move one column to the left, if all of the indi-
cators in the Current Period column are lit, all
speed settings will move downward so that only the
highest indicators in the columns will appear in the
program display. When the speed settings move to
the left again and not all of the indicators in the
Current Period column are lit, the speed settings
will move back up.
HOW TO USE A HEART RATE PROGRAM
Put on the heart rate monitor.
1
The heart rate monitor must be worn when a heart
rate program is used. Refer to HOW TO USE THE
HEART RATE MONITOR on page 7. Note: A
heart rate program can be started without a heart
rate reading; however, the speed and/or incline of
the treadmill may automatically decrease if your
heart rate is not detected during the program.
If the speed or incline setting for the current period
is too high or too low, you can manually override
the setting by pressing the Speed or Incline but-
tons on the console. Every few times a Speed but-
ton is pressed, an additional indicator will light or
darken in the Current Period column. If any of the
columns to the right of the Current Period column
have the same number of lit indicators as the
Current Period column, an additional indicator will
light or darken in those columns as well.
Insert the key fully into the console.
2
3
Refer to HOW TO TURN ON THE POWER on
page 11.
Select one of the heart rate programs.
When the key is
To stop the program temporarily, press the Stop
button. All displays will pause and the Time/
Segment Time display will begin to flash. To
restart the program, press the Start button. To end
the program, press the Stop button, remove the
key, and then reinsert the key.
inserted, the man-
ual mode will be
selected. To se-
lect the 65%–85%
program or the
65%–80% pro-
gram, press the Program button repeatedly until
one of the two heart rate program indicators lights.
Follow your progress with the four displays.
5
6
Refer to step 6 on page 12.
The profiles on the console show how the target
heart rate will change during the heart rate pro-
grams. The program display shows a simplified
profile of the program.
When the program is completed, remove the
key from the console.
When the program is completed, make sure that
the incline of the treadmill is at the lowest
level. Next, remove the key from the console and
put it in a secure place. Note: If the displays and
indicators on the console remain lit after the
key is removed, the console is in the “demo”
mode. Refer to page 23 and turn off the demo
mode.
Enter your age.
4
When a heart rate pro-
gram is selected, the
letters “AGE” will begin
to flash in the
Pulse/Cals/Fat Cals
display. If you have al-
ready entered your age, press the Enter button
and go to step 5. If you have not entered your
age, press the + button beside the Enter button.
The current age setting will then be shown. Press
the + or – button repeatedly to enter your age.
When your age is shown, press the Enter button.
Once you have entered your age, your age will
be saved in memory.
Next, move the on/off switch near the power cord
to the off position.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
When only three seconds remain in the first period
of the program, both the Current Period column
and the column to the right will flash and a tone
will sound. In addition, if the speed and/or incline
of the treadmill is about to change, the
Enter a maximum heart rate setting.
5
After you have en-
tered your age, the
letters “PLS” will ap-
Speed/Pace display and/or the Dist./Incline/Laps
display will flash to alert you, and three tones will
sound. When the first period is completed, all
heart rate settings will move one column to the
left. The heart rate setting for the second period
will then be shown in the flashing Current Period
column and the speed and/or incline of the tread-
mill will automatically change, if necessary, to
bring your heart rate closer to the heart rate set-
ting for the second period.
pear in the
Pulse/Cals/Fat Cals
display. Press the +
button beside the Enter button. The maximum
heart rate setting for the program (in beats per
minute) will then be shown.
Note: If the 65%–85% program is selected, the
maximum heart rate setting can be from 65% to
85% of your estimated maximum heart rate (your
estimated maximum heart rate is 220 minus your
age); if the 65%–80% program is selected, the
maximum heart rate setting can be from 65% to
80% of your estimated maximum heart rate. For
example, if you are 30 years old, your estimated
maximum heart rate is 190 beats per minute (220
minus 30 equals 190). If the 65%–85% program is
selected, the maximum heart rate setting can be
from 123 to 161 beats per minute (65% of 190 is
123; 85% of 190 is 161).
Note: If your heart rate is not detected during the
program, the letters “PLS” will flash in the
Pulse/Cals/Fat Cals display. (Refer to HEART
RATE MONITOR TROUBLE-SHOOTING on page
7.) The speed and/or incline of the treadmill may
also decrease until your heart rate is detected.
The program will continue until the heart rate set-
ting for the final period is shown in the Current
Period column and the Time/Segment Time dis-
play counts down to zero. The walking belt will
then slow to a stop.
If desired, press the + or – button next to the Enter
button repeatedly to adjust the maximum heart
rate setting. When the desired setting is shown,
press the Enter button. Note: If the setting does not
change when the + or – button is pressed, the set-
ting has reached its high or low limit.
While the program is in progress, adjustments can
be made to the speed or incline of the treadmill
with the Speed or Incline buttons. However, if you
increase the speed, the incline will automatically
decrease; if you decrease the speed, the incline
will increase. If you increase the incline, the speed
will decrease; if you decrease the incline, the
speed will increase. The console will always at-
tempt to keep your heart rate near the heart rate
setting for the current period. Note: When the in-
cline reaches the lowest setting, the speed cannot
be increased any further. When the incline
reaches the highest setting, the speed cannot be
decreased any further.
Press the Start button.
6
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
Each heart
Current Period Column
rate program
is divided into
twenty-three,
one-minute
Heart rate programs should not be stopped tem-
porarily and then restarted. To stop the program
before it is completed, press the Stop button, re-
move the key, and then reinsert the key.
periods. One
heart rate
setting is pro-
grammed for
each period.
The heart rate
Follow your progress with the four displays.
7
8
setting for the first period is shown in the flashing
Current Period column of the program display.
The heart rate settings for the next seventeen pe-
riods are shown in the seventeen columns to the
right.
Refer to step 6 on page 12.
When the program is completed, remove the
key from the console.
Refer to step 6 on page 14.
Download from Www.Somanuals.com. All Manuals Search And Download.
shown in the program display.) To program a
speed setting and an incline setting for the first
period, simply adjust the speed and incline of the
treadmill to the desired levels by pressing the
Speed and Incline buttons. As the Speed buttons
are pressed, additional indicators will light or
darken in the Current Period column.
HOW TO CREATE A USER-DEFINED PROGRAM
Put on the heart rate monitor if desired.
1
Refer to step 1 on page 11.
Insert the key fully into the console.
2
3
When the first period of the program is completed,
the current speed setting and the current incline
setting will be stored in memory. The three
Refer to HOW TO TURN ON THE POWER on
page 11.
columns of indicators will then move one column
to the left, and the speed setting for the second
period will be shown in the flashing Current Period
column. Program speed and incline settings for
the second period as described above. Note: After
the third period is completed, the columns of indi-
cators in the program display will no longer move
to the left. Instead, each time a period is com-
pleted, the flashing Current Period column will
move one column to the right. If the Current
Period column reaches the right side of the pro-
gram display, when the current period is com-
pleted, all columns of indicators in the program
display will move three columns to the left.
Select one of the user-defined programs.
When the key is
inserted, the
manual mode will
be selected. To
select one of the
user-defined pro-
grams, press the
Program button repeatedly until one of the two
user-defined program indicators lights.
If the user-defined program has not yet been
defined, three columns of indicators will be lit
in the program display. If more than three
columns of indicators are lit, refer to HOW TO
USE A USER-DEFINED PROGRAM on page 17.
Continue programming speed and incline settings
for as many periods as desired; user-defined pro-
grams can have up to forty periods. When you are
finished with your workout, press the Stop button
twice. The speed and incline settings that you pro-
grammed and the number of periods will then be
saved in memory.
Press the Start button and program the de-
sired speed and incline settings.
4
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
Follow your progress with the four displays.
5
6
Refer to step 6 on page 12.
Each user-
When the program is completed, remove the
key from the console.
Current Period Column
defined
program is
divided into
one-minute
periods. One
speed setting
and one incline
setting can be
programmed
for each pe-
Refer to step 6 on page 14.
riod. The speed setting for the first period is
shown in the flashing Current Period column of
the program display. (Incline settings are not
16
Download from Www.Somanuals.com. All Manuals Search And Download.
will sound. In addition, if the speed and/or incline
of the treadmill is about to change, the Speed/Pace
display and/or the Dist./Incline/Laps display will
flash to alert you, and three tones will sound.
When the first period is completed, all speed set-
tings will move one column to the left. The speed
setting for the second period will then be shown in
the flashing Current Period column and the tread-
mill will automatically adjust to the speed and in-
cline settings for the second period.
HOW TO USE A USER-DEFINED PROGRAM
Put on the heart rate monitor if desired.
1
Refer to step 1 on page 11.
Insert the key fully into the console.
2
3
Refer to HOW TO TURN ON THE POWER on
page 11.
The program will continue until the speed setting
for the final period is shown in the Current Period
column and the Time/Segment Time display
counts down to zero. The walking belt will then
slow to a stop.
Select one of the user-defined programs.
When the key is
inserted, the
manual mode will
be selected. To
select one of the
user-defined pro-
grams, press the
Program button repeatedly until one of the two
user-defined program indicators lights.
If desired, you can redefine to the program while
using the program. To change the speed or in-
cline setting during the current period, simply
press the Speed or Incline buttons. When the current
period is completed, the new setting will be saved in
memory. To increase the length of the program,
first wait until the program is completed. Then, press
the Start button and program speed and incline set-
tings for as many additional periods as desired.
Note: While you are adding periods to the pro-
gram, the speed settings in the program display
will not move to the left. Instead, each time a pe-
riod is completed, the flashing Current Period col-
umn will move one column to the right. If the
Current Period column reaches the right side of
the program display, when the current period is
completed, all columns of indicators in the pro-
gram display will move three columns to the left.
When you have added as many periods as de-
sired, press the Stop button twice. To decrease
the length of the program, press the Stop button
twice at any time before the program is completed.
When a user-defined program is selected, the pro-
gram display will show a simplified profile of the
program. If only three columns of indicators
are lit in the program display, refer to HOW TO
CREATE A USER-DEFINED PROGRAM on
page 16.
Press the Start button.
4
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
Each user-de-
fined program
is divided into
one-minute pe-
riods. One
speed setting
and one incline
setting are pro-
grammed for
each period.
Current Period Column
To stop the program temporarily, press the Stop
button. All displays will pause and the Time/
Segment Time display will begin to flash. To
restart the program, press the Start button. To end
the program before it is completed, press the Stop
button, remove the key, and then reinsert the key.
Follow your progress with the four displays.
The speed set-
5
6
ting for the first period is shown in the flashing
Current Period column of the program display.
(The incline settings are not shown in the program
display.) The speed settings for the next several
periods are shown in the columns to the right.
Refer to step 6 on page 12.
When the program is completed, remove the
key from the console.
Refer to step 6 o page 14.
When only three seconds remain in the first period
of the program, both the Current Period column
and the column to the right will flash and a tone
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CD’s, the treadmill must be con-
nected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
18 to 20 for connecting instructions. To use iFIT.com
videocassettes, the treadmill must be connected to
your VCR. See page 20 for connecting instructions. To
use iFIT.com programs directly from our Web site,
the treadmill must be connected to your home com-
puter. See page 19 for connecting instructions.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER
AUDIO OUT
RIGHT
LEFT
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
Audio
Cable
Adapter
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
A
PHONES LINE OUT
LINE OUT
PHONES
B
Head-
phones
Audio
Cable
LINE OUT
Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.
C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
B
PHONES
C
PHONES
3.5mm
Y-adapter
Audio
Cable
PHONES
3.5mm
Y-adapter
Audio
Cable
Headphones
Headphones
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
A
CD
LINE OUT
VCR
Amp
LINE OUT
Audio
Cable
LINE OUT
Audio
Cable
Adapter
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the LINE
OUT jack on your stereo.
B
PHONES
B
CD
Audio
Cable
3.5mm
Y-adapter
VCR
Amp
LINE OUT
Headphones/Speakers
RCA
Adapter
Audio
Adapter
Cable
Wire removed from
LINE OUT jack
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR VCR
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 19.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
B
ANT IN
.
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
A
ANT
.
IN
RCA Adapter
Adapter
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
Audio
Cable
AUDIO OUT
RIGHT
LEFT
Wire removed from
AUDIO OUT jack
Audio
Cable
Adapter
20
Download from Www.Somanuals.com. All Manuals Search And Download.
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the CD or video program.
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
To use iFIT.com CD’s or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on page
18. Note: To purchase iFIT.com CD’s or iFIT.com
videocassettes, call toll-free 1-800-735-0768.
To stop the program at any time, press the Stop
button on the console. The Time/Segment Time
display will begin to flash. To restart the program,
press the Start button. After a moment, the walk-
ing belt will begin to move at 1.0 mph. When the
next “chirp” is heard, the speed and incline
will change to the next settings of the CD or
video program. The program can also be
stopped by pressing the Stop button on your CD
player or VCR.
Follow the steps below to use an iFIT.com CD or video
program.
Insert the key fully into the console.
When the CD or video program is completed, the
walking belt will stop and the Time/Segment Time
display will begin to flash. Note: To use another
CD or video program, press the Stop button or re-
move the key and go to step 1.
1
See HOW TO TURN ON THE POWER on page 11.
Select the iFIT.com mode.
2
When the key is
inserted, the
manual mode
Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard:
• Make sure that the iFIT.com indicator is lit
and that the Time/Segment Time display is
not flashing If the Time/Segment Time dis-
play is flashing, press the Start button on the
console.
will be selected.
To use iFIT.com
CD’s or video-
cassettes, press
the Program button repeatedly until the iFIT.com
indicator lights.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD into
your CD player. If you are using an iFIT.com video-
cassette, insert the videocassette into your VCR.
• Make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
Press the PLAY button on your CD player or VCR.
• If you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.
4
A moment after the button is pressed, your per-
sonal trainer will begin guiding you through your
workout. Note: If the Time/Segment Time display
is flashing, press the Start button on the console.
The treadmill will not respond to a CD or video
program when the display is flashing.
Follow your progress with the LED track and
the four displays.
5
6
Refer to step 6 on page 12.
When the iFIT.com CD or video program is
finished, remove the key.
During the program, an electronic “chirping” sound
will alert you when the speed and/or incline of the
treadmill is about to change. CAUTION: Always
listen for the “chirp” and be prepared for speed
and/or incline changes. In some instances, the
speed and/or incline may change before the
personal trainer describes the change.
Refer to step 6 on page 14.
CAUTION: Always remove iFIT.com CD’s and
videocassettes from your CD player or VCR
when you are finished.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the clip onto the waistband of your clothing.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
7
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking.
access a large selection of programs that interactively
control your treadmill to help you achieve your specific
exercise goals. In addition, you can play iFIT.com
audio and video programs directly from the internet. By
adding an optional upgrade module to the console, you
can use virtually endless features on our Web site.
Explore www.iFIT.com for details. To purchase an up-
grade module, call toll-free 1-800-735-0768.
During the program, an electronic “chirping” sound
will alert you when the speed and/or incline of the
treadmill is about to change. CAUTION: Always
listen for the “chirp” and be prepared for speed
and/or incline changes.
To use programs from our Web site, the treadmill must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 19. In addi-
tion, you must have at least a 56K modem and an ac-
count with an internet service provider. A list of addi-
tional system and software requirements will be found
on our Web site.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the program.
To stop the program at any time, press the Stop
button on the console. The Time/Segment Time
display will begin to flash. To restart the program,
press the Start button. After a moment, the walk-
ing belt will begin to move at 1.0 mph. When the
next “chirp” is heard, the speed and incline
will change to the next settings of the program.
Follow the steps below to use a program from our
Web site.
Insert the key into the console.
1
See HOW TO TURN ON THE POWER on page 11.
Select the iFIT.com mode.
When the program is completed, the walking belt
will stop and the Time/Segment Time display will
begin to flash. Note: To use another program,
press the Stop button and go to step 5.
2
When the key is
inserted, the
manual mode will
be selected and
the manual indi-
cator will light. To
use a program
from our Web site, press the Program button re-
peatedly until the iFIT.com indicator lights.
Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard, make
sure that the iFIT.com indicator is lit and that
the Time/Segment Time display is not flashing.
In addition, make sure that the audio cable is
properly connected, that it is fully plugged in,
and that it is not wrapped around a power cord.
Go to your computer and start an internet
3
connection.
Follow your progress with the LED track and
the four displays.
8
9
Start your web browser, if necessary, and go to
4
Refer to step 6 on page 12.
Follow the desired links on our Web site to se-
lect a program.
When the program is finished, remove the key.
Refer to step 6 on page 14.
5
Read and follow the on-line instructions for using a
program.
Follow the on-line instructions to start the
program.
6
When you start the program, an on-screen count-
down will begin.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INFORMATION MODE/DEMO MODE
OPTIONAL HAND WEIGHTS
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
Optional hand weights
let you include upper-
body exercise in your
workouts. The hand
weights fit into conve-
nience holders in the
console. To purchase
hand weights, call
toll-free 1-800-999-
3756.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
THE OPTIONAL IFIT.COM MODULE
The Dist./Incline/Laps
display will show the total
number of miles that the
walking belt has moved.
By adding an optional
iFIT.com module to the
treadmill, you can use
virtually endless fea-
tures from our Web
site. Imagine on-line
competitions, personal
training sessions via
the internet, and the ability to use your computer to
track your workouts. For information about purchas-
ing the optional iFIT.com module, call toll-free
1-800-735-0768.
An “E” for English (miles),
or an “M” for metric (kilo-
meters), will appear in the
Speed/Pace display. Press
the Speed + button to
change the unit of mea-
surement.
The Time/Segment Time
display will show the total
number of hours the tread-
mill has been used.
IMPORTANT: The
Pulse/Cals/Fat Cals dis-
play should be blank. If a
“d” appears in the display,
the console is in the
“demo” mode. This mode
is intended to be used only when a treadmill is dis-
played in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the displays and in-
dicators on the console will automatically light in a pre-
set sequence, although the buttons on the console will
not operate. If a “d” appears in the Pulse/Cals/Fat
Cals display when the information mode is se-
lected, press the Speed – button so the
Pulse/Cals/Fat Cals display is blank.
To exit the information mode, remove the key from the
console.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
1
Before folding the treadmill, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
2
treadmill firmly. Hold the lock knob with your left hand
and pull it to the side. Raise the treadmill until the lock
knob is aligned with the catch. Slowly release the lock
knob. Make sure that the pin on the lock knob is in-
side of the catch.
Pin
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° Fahrenheit.
Lock
Knob
Catch
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the pin
on the lock knob is inside of the catch.
1. Hold the handrails and place one foot on a front wheel as
shown.
2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired loca-
tion. Never move the treadmill without tipping it back.
To reduce the risk of injury, use extreme caution
while moving the treadmill. Do not move the treadmill
over an uneven surface.
Base
3. Place one foot on the base and carefully lower the tread-
mill until it is resting on the base.
Front Wheels
HOW TO LOWER THE TREADMILL FOR USE
1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Hold the lock
knob with your left hand and pull it to the side. Pivot the treadmill down a few inches.
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands and lower the treadmill to the floor. To de-
crease the possibility of injury, bend your legs and keep your back straight.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-
free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppres-
sor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation
of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.
Important: The treadmill is not compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
c
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
Tripped
Reset
d. Check the on/off switch located on the treadmill
near the power cord. The switch must be in the on
position.
d
On
Position
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill near the power cord (see c. above). If the circuit
breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console.
d. Make sure that the on/off switch is in the on position (see d. above).
e. If the treadmill still will not run, please call our Customer Service Department toll-free.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only an appropriate surge suppressor (see a. near the top of this page).
b. If the walking belt is overtightened, treadmill perfor-
b
mance may decrease and the walking belt may be-
3”–4”
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts counterclockwise 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key, and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
Rear Roller Bolts
c. If the walking belt still slows when walked on, call our Customer Service Department, toll-free.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt has shifted to the left, first re-
move the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear roller bolt
clockwise 1/2 of a turn. Be careful not to overtighten
the walking belt. If the walking belt has shifted to
the right, turn the left rear roller bolt counterclockwise
1/2 of a turn. Plug in the power cord, insert the key and
run the treadmill for a few minutes. Repeat until the
walking belt is centered.
a
b. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn both rear roller bolts clockwise,
1/4 of a turn. When the walking belt is correctly tight-
ened, you should be able to lift each side of the walk-
ing belt 3 to 4 inches off the walking platform. Be
careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the
treadmill for a few minutes. Repeat until the walking
belt is properly tightened
b
PROBLEM: The Speed/Pace display on the console does not function properly
SOLUTION: a. Remove the key from the console and unplug the
a
power cord. Remove the screws from the hood and
1/8”
26
carefully remove the hood. Locate the Reed Switch
(17) and the Magnet (12) on the left side of the Pulley
(11). Turn the Pulley until the Magnet is aligned with
the Reed Switch. Make sure that the gap between
the Magnet and the Reed Switch is about 1/8”. If
necessary, loosen the Reed Switch Screw (26) and
move the Reed Switch slightly. Retighten the Screw.
Re-attach the hood and run the treadmill for a few
minutes to check for a correct speed reading.
11
12
17
Top
View
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The heart rate monitor does not function properly
SOLUTION: a. If the heart rate monitor does not function properly, see HEART RATE MONITOR TROUBLE-
SHOOTING on page 7.
b. If the heart rate monitor still does not function properly, the battery
b
should be changed. To replace the battery, locate the battery cover
on the back of the sensor unit. Insert a coin into the slot in the cover
and turn the cover counterclockwise to the “open” position. Remove
the cover.
Battery Cover
Remove the old battery from the sensor unit. Insert a new CR 2032
battery, making sure that the writing is on top. In addition, make sure
that the rubber gasket is in place in the sensor unit. Replace the bat-
tery cover and turn it to the closed position.
Battery
Cover
Battery
Rubber
Gasket
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
Burning Fat
WARNING:
Before beginning
To burn fat, you must exercise at a low intensity level
for a sustained period of time. During the first few
minutes of exercise, your body uses easily accessible
carbohydrate calories for energy. Only after the first few
minutes of exercise does your body begin to use stored
fat calories for energy. If your goal is to burn fat, adjust
the speed and incline of the treadmill until your heart
rate is near the low end of your training zone as you ex-
ercise.
any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals with pre-
existing health problems.
The heart rate monitor is not a medical de-
vice. Various factors may affect the accuracy
of heart rate readings. The heart rate monitor
is intended only as an exercise aid in deter-
mining heart rate trends in general.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the middle of your training zone.
The following guidelines will help you to plan your ex-
ercise program. For more detailed information about
exercise, obtain a book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the desired
results is to exercise with the proper intensity. The
proper intensity level can be found by using your heart
rate as a guide. For effective exercise, your heart rate
should be maintained at a level between 65% and 85%
of your maximum heart rate as you exercise. This is
known as your training zone. You can find your training
zone in the table below. Training zones are listed ac-
cording to age and physical condition.
WORKOUT GUIDELINES
Each workout should include the following three impor-
tant parts:
A Warm-up—Warming up prepares the body for exer-
cise by increasing circulation, delivering more oxygen
to the muscles, and raising the body temperature.
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up.
Training Zone (Beats/Min.)
Training Zone Exercise—After warming up, increase
the intensity of your exercise until your heart rate is in
your training zone for 20 to 60 minutes. (During the
first few weeks of your exercise program, do not keep
your heart rate in your training zone for longer than 20
minutes.) Breathe regularly and deeply as you exer-
cise—never hold your breath.
Unconditioned
Conditioned
Age
20
25
30
35
40
45
50
55
60
65
70
75
80
138-167
136-166
135-164
134-162
132-161
131-159
129-156
127-155
126-153
125-151
123-150
122-147
120-146
133-162
132-160
130-158
129-156
127-155
125-153
124-150
122-149
121-147
119-145
118-144
117-142
115-140
A cool-down—Finish each workout with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help to prevent post-
exercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months, you may com-
plete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
1
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings, back
of knees, and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot to-
ward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back, and groin.
2
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons, and ankles.
3
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps
and hip muscles.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. IMTL07610
R0801A
Note: To identify the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
2
1
4
4
1
1
4
1
2
4
1
1
6
2
2
1
1
1
4
4
1
1
1
1
1
8
4
1
1
2
1
4
1
4
1
1
1
1
1
6
1
2
12
19
1
1
1
2
4
4
Foot Rail Insert
Right Foot Rail
Nylon Washer
Isolator
Latch Catch
Platform
Walking Deck Screw
Walking Belt
Frame Pivot Bolt
Frame Pivot Washer
Front Wheel/Pulley
Magnet
Front Roller Nut/Pivot
Spacer Insert
Frame Pivot Spacer
Reed Switch Clip
Reed Switch
Lift Frame
Clips
Motor Nut
Left Foot Rail Endcap
Motor Belt
Pulley/Flywheel/Fan
Motor
Motor Tension Nut
Screw
Hood Bracket
Motor Tension Bolt
Motor Tension Washer
Lift Motor Nut (Lower)
Lift Motor Bolt
Motor Bolt
Outlet Bracket
Plastic Stand-off
Power Supply
Power Supply Bracket
Controller
Controller Bracket
Motor Hood
Hood Screw
Motor Belly Pan
Belt Guide
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66**
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88*
89
90
91
92
93
94
95
96
97
98
99
100
1
4
2
1
1
1
2
1
2
2
6
1
1
1
1
2
1
1
1
1
1
1
2
4
7
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
1
5
2
17
1
Chest Pulse Strap
Roller Adj. Washer
Rear Roller Adjustment Bolt
Rear Endcap
Frame
Allen Wrench
Rear Platform Screw
Rear Roller
9
Left Upright Cover
Right Upright Cover
Upright Cover Screw
Left Foam Grip
Handrail Endcap
Pulse Sensor
Upright
2-lb. Weight
Lock Knob
Lock Knob Sleeve
Lock Knob Spring
Lock Pin Collar
Pin Clip
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Lock Pin
Incline Pivot Bolt
Metal Motor Washer
Console Screw (long)
Wheel Spacer
Front Wheel
Wheel Bolt
Right Foam Grip
Console Base (Top)
Console
Key/Clip
Console Base (Bottom)
Left Foot Rail
Upright Wire Harness
Shock
Upright Endcap
Motor/Pulley/Flywheel/Fan
Right Foot Rail Endcap
Latch Warning Decal
Incline Motor
Motor Controller Wire
Incline Motor Spacer
Tie Holder Screw
Tie Holder
Tie
8” Cable Tie
Bumper
Bumper Screw/Base Screw
On/Off Switch
Belt Guide Screw
Plastic Fastener
Frame Belly Pan
12” Audio Wire
Ground Screw
Rear Foot
Isolator Washer
Isolator Nut
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
106
107
108
109
110
111
112*
113
114
115
1
1
1
1
1
1
1
2
4
6
1
1
1
2
2
Circuit Breaker
Power Cord
Power Cord Grommet
Warning Decal
Chest Pulse Sensor
Jack
iFIT.com Audio Cable
Foam Grip Screw
Long Console Screw
Endcap Screw/Pad Screw
Audio Cable Nut
116
117
#
#
#
#
#
#
#
2
4
1
1
1
1
1
1
1
1
Roller Star Washer
Wheel Washer
14” White Wire, 2 F
4” White Wire, M/F
8” Blue Wire, M/F
8” Blue Wire, 2 F
8” Black Wire, M/F
4” Black Wire, 2 F
8” Red Wire, M/F
User’s Manual
#
Latch Assembly
* Includes all parts shown in the box
**For more information about the optional hand
weights, see page 23
Lift Motor Bolt (Upper)
Motor Tension Star Washer
Frame Pivot Star Washer
# These parts are not illustrated
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give
the following information:
When requesting help or service, or ordering parts, please be prepared to provide the following information:
• The MODEL NUMBER of the product (IMTL07610)
• The NAME of the product (IMAGE® 12.0Q treadmill)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER AND DESCRIPTION OF THE PART (see the PART LIST at the left and above and the
EXPLODED DRAWING in the center of this manual)
If possible, place the treadmill near your telephone for easy reference when calling.
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. IMTL07610
R0801A
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. IMTL07610
R0801A
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
WHAT IS COVERED—The entire IMAGE® 12.0Q (“Product”) is warranted to be free of all defects in material and workman-
ship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the motor for three years after the date of
purchase. The belt and deck are covered for two years after the date of purchase. All mechanical components are covered
for two years after the date of purchase. All electrical components are covered for two years after the date of purchase.
Labor is covered for one year.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or com-
ponent, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service
provider, or, at our option, we will replace the Product.
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, im-
proper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use,
operate, and maintain as set out in your User’s Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the
Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of
the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember
to do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satis-
faction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-800-999-3756 and tell them
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if neces-
sary, arrange for service where your Product is located or advise you how to ship the Product for service. Before shipping,
always obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack your
Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product.
Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered
by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use
or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits,
loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states
do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not
apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or
fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow
limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 176316 R0801A
Printed in USA © 2001 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|