USER MANUAL
FRANCAIS
NEDERLANDS
DEUTSCH
SVENSKA
DEUTSCH
SVENSKA
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future reference.
ENGLISH
ITALIANO
DEUTSCH
FRANCAIS
ITALIANO
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product developed
for professional use. Your purchase has also contributed to
reducing the burden on the environment and also to the further
development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation
of goods and services to the environment. The main problem, as far as computers and other electronics
equipment are concerned, is that environmentally harmful substances are used both in the products and during
their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment,
most of these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important
from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions,
radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously
and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for international and environmental
labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric
and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must
be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be
adhered to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to
reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric
and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO’99 approved and labelled products may also be
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of
flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive
damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have
been found in human blood and researchers fear that disturbances in foetus development may occur.
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit
boards since no substitutes are available.
Cadmium* *
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays.
Cadmium damages the nervous system and is toxic in high doses. The relevant TCO’99 requirement states
that batteries, the colour-generating layers of display screens and the electrical or electronics components
must not contain any cadmium.
Mercury* *
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in
high doses. The relevant TCO’99 requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics components associated with the
labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs
break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on
earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
Lead* *
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous
system and in higher doses, causes lead poisoning. The relevant TCO’99 requirement permits the inclusion of
lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC DECLARATION OF CONFORMITY
Model Number:
Trade Name:
PLE483S
iiyama
Responsible party:
Address:
IIYAMA North America, Inc.
65 West Street Road, Suite 101B, Warminster, PA 18974 U.S.A.
215-682-9050
Telephone number:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a residential environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If you determine the device does cause harmful interference to radio
or television reception (this may be determined by monitoring the interference while turning the device off and
on), you are encouraged to try to correct the interference by one of the following measures:
ꢀ
ꢀ
ꢀ
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver
is connected.
ꢀ
Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION
Changes or modifications not expressly approved by IIYAMA could void the users authority
to operate the device under FCC compliance regulations.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set
out in the radio interference regulation of the Canadian department of communications.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All
places of operation are characterised by their connection to the public low voltage power supply system.
ꢀWe reserve the right to change specifications without notice.
ꢀAll trademarks used in this user manual are the property of their respective owners.
ꢀAs an ENERGY STAR® Partner, IIYAMA has determined that this product meets the ENERGY STAR® guidelines for
energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
FOR YOUR SAFETY ........................................................................
SAFETY PRECAUTIONS ..........................................................
SPECIAL NOTES ON LCD MONITORS ..................................
CUSTOMER SERVICE ................................................................
CLEANING ....................................................................................
BEFORE YOU OPERATE THE MONITOR ....................................
CHECKING THE CONTENTS OF THE PACKAGE ...............
HOW TO USE THE STAND ......................................................
HOW TO UNINSTALL THE STAND ........................................
COMPUTER SETTING ................................................................
ADJUSTING THE VIEWING ANGLE .......................................
FRONT PANEL CONTROL ........................................................
INSTALLATION ............................................................................
OPERATING THE MONITOR............................................................
USING OSD FUNCTION .............................................................
MAIN MENU ..................................................................................
ADJUSTING ..................................................................................
1
1
3
3
3
4
4
4
5
6
6
7
7
8
8
8
8
CARE AND MAINTENANCE ............................................................ 16
TROUBLE SHOOTING ...................................................................... 17
APPENDIX............................................................................................ 18
SPECIFICATIONS ........................................................................ 18
DIMENSIONS ................................................................................ 19
COMPLIANT TIMING .................................................................. 19
CONNECTOR PINASSIGNMENT............................................. 20
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can
cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any
object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
1
FOR YOUR SAFETY
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAINGOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field
produced by the speakers if the disks are placed on or near the speakers.
OTHERS
ERGONOMICRECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
FOR YOUR SAFETY
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position.
ꢀ
Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
ꢀ
ꢀ
ꢀ
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for hours.
ꢀ Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
ꢀ
The fluorescent light used in the LCD monitor may have to be periodically replaced.
For the warranty coverage on this component, please check with local iiyama service
center.
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
ꢀ
CLEANING
WARNING
CAUTION
NOTE
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
ꢀ
ꢀFor safety reasons, turn off the power switch and unplug the monitor before you
clean it.
ꢀTo protect the LCD panel, do not scratch or rub the screen with a hard object.
ꢀNever use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Spray-type cleaner
Wax
Thinner
Benzine
Acid or Alkaline solvent
Abrasive cleaner
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
ꢀ
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
CABINET
LCD
Periodic cleaning with a soft dry cloth is recommended.
SCREEN
Don't use tissue paper etc. because these will damage the LCD screen.
3
FOR YOUR SAFETY
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU OPERATE THE MONITOR
CHEKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local IIYAMA dealer or regional
IIYAMA office.
ꢀPower Cable*
ꢀUser Manual
ꢀAudio Cable
ꢀD-Sub Signal Cable
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a
power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used.However, all guarantees and warranties are void for any problems or
damage caused by a power cable not supplied by IIYAMA.
CAUTION
HOW TO USE THE STAND
The monitor is the design that a stand rotate. Be sure to rotate the stand before opearating the monitor,
and rotate the stand upward before you re-box the monitor.
Install the Stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
ꢀ
CAUTION
Do not give a strong impact to the monitor. It may cause damage.
ꢀ
ꢀ
Unplug the monitor before installation to avoid electric shock or damage.
(Fig 1)
(Fig 2)
(Fig 3)
(Fig 4)
1. Lay the monitor flat on a table with front face down (see Fig 1). Put a piece of soft cloth
on the table beforehand to prevent the monitor from being scratched.
2. Unpack the stand and mount it onto the monitor base with aligning it to the hook
(see Fig 2).
3. Slide the stand upward until it makes a click sound, indicating it is fixed (see Fig 3).
4. Stand the monitor up (see Fig 4).
BEFORE YOU OPERATE THE MONITOR
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO UNINSTALL THE STAND
(Fig 1)
(Fig 3)
(Fig 5)
(Fig 2)
(Fig 4)
1. Lay the monitor flat on a table with the LCD screen face down (see Fig 1). To prevent the
monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Locate the hook on the stand (see Fig 2).
3. Hold the monitor and stand with both hands, and then slowly push the hook up, do not
loose (see Fig 3).
4. Hold the monitor firmly with one hand and slide the stand downward with the other hand
(see Fig 4). Make sure you slide the stand down slowly or you may damage both the
monitor and the stand (see Fig 5).
5. Then, you shall successfully uninstall the stand.
5
BEFORE YOU OPERATE THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPUTER SETTING
ꢀSignal Timing
Change to the desired signal timing listed on page 19: COMPLIANT TIMING.
ꢀWindows 95/98/2000/Me/XP Plug & Play
The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs
on Windows 95/98/2000/Me/XP by connecting the monitor to DDC1/2B compliant computer with the
Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
ꢀFor additional information on how to download the driver for your touch screen monitor,
NOTE
NOTE
please access the internet site noted above.
ꢀMonitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.
ADJUSTING THE VIEWING ANGLE
ꢀFor optimal viewing it is recommended to look at the full face of
the monitor.
ꢀHold the stand so that the monitor does not topple when you
change the monitor’s angle.
ꢀYou are able to adjust the monitor’s angle up to 20 degrees
backward. (The indication of 20 degrees: tilted LCD panel
holds for a moment at this point. Tilt the panel gently; using too
much force can easily cause the tilt angle to exceed 20
degrees.)
NOTE
ꢀIn order to ensure a healthy and relaxed body position when
using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed
10 degrees. Adjust the monitor’s angle to your own preference.
20
ꢀDo not touch the LCD screen when you change the
NOTE
angle. It may cause damage or break the LCD screen.
ꢀCareful attention is required not to catch your fingers
or hands when you change the angle.
ꢀDo not tilt the post beyond 20 degrees except when
repacking the monitor in its box.
To do so may cause the monitor to fall over and break.
BEFORE YOU OPERATE THE MONITOR
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL CONTROL
A ACTIVATE/EXIT OSD
B
SCROLL DOWN / DECREASE
C SCROLL UP / INCREASE D SELECT DESIRED FUNCTION
E LED INDICATOR
G SPEAKERS
F
POWER ON / OFF
INSTALLATION
AC CONNECTOR (AC IN)
AUDIO CONNECTOR
H
J
I
DVI-D-24PINCONNECTOR(DVI)
K
D-SUB MINI 15PIN CONNECTOR(VGA)
L KEYHOLE FOR SECURITY LOCK
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
NOTE
7
BEFORE YOU OPERATE THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MONITOR
USING OSD FUNCTION
s
1. Press the X button to display the main menu shown below.
2. Press the S or T button to scroll to the desired menu option.
3. Press the ꢀ button to select the menu option.
4. Press the S or T button to select submenu option.
5. After making adjustment, press X button to save changes and exit the screen.
NU
MAIN MENU
Main Menu
Analog
AUTO
SET
Auto Adjust
Contrast/Brightness
Color Adjust
Information
i
Image Adjust
Setup Menu
?
Memory Recall
Audio Menu
1 : Exit
2 : Select
t
ADJUSTING
AUTO
SET
Auto Adjust
Auto Adjust: Auto adjust horizontal position, vertical position, phase (Fine Tune)
and Clock (H.Size).
OPERATING THE MONITOR
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
1 : Exit
2 : Brightness
Contrast: To adjust the foreground white level of screen image.
S : increase contrast, T : decrease contrast.
Brightness
1 : Exit
2 : Contrast
Brightness: To adjust the background black level of screen image.
S : increase brightness, T : decrease brightness.
Color Adjust
9300K
6500K
5400K
User Color
1 : Exit
Color Adjust: Provides four preset color adjustments:
9300K, 6500K, 5400K and User Color for improved brightness andn color
saturation. Press button ꢀ to select the preset color.
9300K—Adds blue to screen image for cooler white.
6500K—Adds red to screen image for warmer white and richer red.
5400K—Adds green to screen image for a darker color.
9
OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
User Color
R
G
B
1 : Exit
2 : Select
User Color: Individual adjustments for red(R), green (G), blue (B).
1. Press button ꢀ to set adjustment and select next color to adjust.
2. Press S or T button to adjust selected color.
Information
H.Frequency: 79.99 kHz
V.Frequency: 75.03 Hz
Pixel Clock: 135.04 MHz
Resolution: 1280 x 1024
Model Number: PLE483
Serial No: 1007130001001
1 : Exit
Information: Displays information regarding the current input signal coming from the
graphic card in your computer.
See your graphic card user guide for more information about changing
NOTE
the resolution and refresh.
OPERATING THE MONITOR 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Adjust
H. /V. Position
H.Size
Fine Tune
Sharpness
1 : Exit
2 : Select
Image Adjust: Adjust Horizontal/ Vertical position, H. Size, Fine Tune and Sharpness.
H. Position
Use Up/Down to Adjust
1 : Exit
2 : V. Position
H./V. Position: To adjust the horizontal and vertical position of the video.
H. Position: S : moves screen to right, T : moves screen to left.
V. Position: S : moves screen to up, T : moves screen to down.
H. Size
1 : Exit
H.Size: Adjusts the width of screen image.
T decreases width of screen image, S increases width of screen image.
11 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tune
1 : Exit
Fine Tune: To adjust the delay time.
Press S or T to adjust to user preference.
Sharpness
1 : Exit
Sharpness: Adjusts the clarity of a non-SXGA (1280x1024) signal.
Press S or T button to adjust.
Setup Menu
Language Select
Resolution Notice
OSD Position
OSD
OSD Time Out
Input Select
Analog
1 : Exit
2 : Select
Setup Menu: To setting Language Select, Resolution Notice, OSD position, OSD Time Out
and Input Select(Analog).
OPERATING THE MONITOR 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Select
~
1 : Exit
2 : Select
Language Select: Allows the user to choose from available languages.
Resolution Notice
Disable
Enable
1 : Exit
Resolution Notice: There is a OSD message of “For best picture quality change
resolution to ”1280 x 1024” displayed on the screen after 30 seconds Powering ON or
changing mode to lower resolutions (640 x 480/ 720 x 400/ 800 x 600/ 1024x768), if the
function was “enable”. Above message would not display on screen if it was "disable".
13 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Position
H.
V.
1 : Exit
2 : Select
OSD Position: Press the ꢀ button to select the horizontal or vertical OSD position.
Horizontal OSD Position horizontally repositions all OSD screens.
S moves OSD right, T moves OSD left.
Vertical OSD Position vertically repositions all OSD screen.
S moves OSD up, T moves OSD down.
OSD Time Out
15
1 : Exit
OSD Time Out: Sets the length of time the Onscreen Display screen is displayed before
exiting.
OPERATING THE MONITOR 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Language Select
Resolution Notice
OSD Position
OSD Time Out
Input Select
OSD
Analog
1 : Exit
2 : Select
Input Select: When press Input Select change Input singnal to Analog or Digital.
Memory Recall
Memory Recall: Return the adjustments back to factory settings.
Press the button ꢀto select the Memory Recall menu option.
Audio Menu
Volume
Mute
off
1 : Exit
2 : Select
Audio Menu:
Volume:For adjust speaker output.
Mute:To select the Mute ON/OFF.
15 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
CARE
CARE
Avoid exposing your monitor directly to sunlight or other heat source.
ꢁ
Place your monitor away from the sun to reduce glare.
Put your monitor in a well ventilated area. Do not place anything heavy on top of your
ꢁ
monitor.
Make certain your monitor is install in a clean and moisture-free area.
ꢁ
Keep your monitor away from magnets,motors, transformers, speakers,and TV sets.
ꢁ
NOTE
Move the LCD out of the package and take off the plastic bag and polystyrene Foam.
ꢁ
Pull the base from Parellel versus panel to vertical.
ꢁ
Adjust the Panel within 0 degree leaning forward and 20 degree leaning backward.You
ꢁ
must bend harder to exceed 20 degree backward but this range is for packing the unit to
a small size for storage only.
Panel exceeding 0 to 20 degree could cause the unit unstable and the harm will be
CAUTION
unpredictable.
SAFETY TIPS
If smoke, abnormal noise or odor came out of your monitor, switch off the power
ꢁ
immediately and call yours service center.
Never remove the rearcover of your monitor cabinet, The display unit inside contains
ꢁ
high-voltage parts and may cause electric shock to human bodies.
Never try to repair your monitor yourself. Always call your service center or a qualified
ꢁ
technician to fix it.
1
CARE AND MAINTENANCE 16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
No Power
ꢁ Make sure A/C power is securely connected to the power adapter and the power supply
is firmly connected to the monitor.
ꢁ Plug another electrical device into the power inlet to verify that the outlet is supplying
proper voltage.
ꢁ Make sure all short cables are installed.
Power on but no screen image
Make sure the video cable supplied with the monitor is tightly secured to the video output port
ꢁ
ꢁ
on back of the computer. If not, tightly secure it.
Adjust brightness
Wrong or abnormal colors
ꢁ If any colors (red, green, blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an improper
connection.
ꢁ Connect the monitor to another computer.
17 TROUBLE SHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
SPECIFICATIONS
LCDPanel Driving system
a-Si TFT Active Matrix
Diagonal: 48.3cm / 19.0"
0.294mm H × 0.294mm V
250cd/m2 (Typical)
Size
Pixel pitch
Brightness
Contrast ratio
650 : 1 (Typical)
Viewable angle
Right / Left : 75 degrees each, Up / Down: 70/65 degrees (Typical)
8ms (Black, white, black)
Response time
Display Colors
Approx.16.2M (6bit+2bit ditherring)
Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz
135MHz maximum
Sync Frequency
Dot Clock
Maximum Resolution
Input Connector
1280 × 1024, 1.3 MegaPixels
D-Sub mini 15 pin
DVI-D 24pin
Plug & Play
VESADDC1/2BTM
Input Sync Signal
Separate sync: TTL, Positive or Negative
Analog: 0.7Vp-p (Standard), 75Ω, Positive
Input Video Signal
Digital: DVI(Digital Visual Interface standard Rev.1.0)compliance
Input Audio Connector
ø 3.5mm mini jack (Stereo)
1Vrms maximum
Input Audio Signal
Speakers
1W × 2 (Stereo speakers)
376.3mm W × 301.1mm H / 14.8" W × 11.9" H
Maximum Screen Size
Power Source
100-240VAC, 50/60Hz, 1.5A
Power Consumption
55W maximum, Power management mode: 2W maximum*
Dimensions / Net Weight
Tilt Angle
414.5 × 433.5 × 200.5mm / 16.3 ×17.1 × 7.9" (W×H×D), 5.6kg / 12.3lbs
20 degrees (Up: 0-20 degrees)
Operating: Temperature
Humidity
Environmental
Considerations
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Temperature
Humidity
Storage:
Approvals
TCO ’99, CE, TÜV-GS / MPRIII (prEN50279) / ISO 13406-2,
FCC-B, UL / C-UL, VCCI-B, CCC
NOTE
* Condition: Audio equipment is not connected.
APPENDIX 18
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
DIMENSIONS
70.5mm/2.8"
414.5mm/16.3"
201.5mm/7.9"
COMPLIANT TIMING
Vertical
Frequency
Horizontal
Frequency
Video Mode
Dot Clock
COMPLIANT TIMING
25.175MHz
31.500MHz
36.000MHz
40.000MHz
49.500MHz
50.000MHz
65.000MHz
75.000MHz
78.750MHz
108.000MHz
135.000MHz
28.322MHz
30.240MHz
57.280MHz
31.468kHz
59.941Hz
74.997Hz
56.249Hz
60.317Hz
75.001Hz
72.186Hz
60.002Hz
70.067Hz
75.039Hz
60.029Hz
75.024Hz
70.086Hz
66.667Hz
74.532Hz
VGA
640 × 480
COMPLIANT TIMING
37.500kHz
35.156kHz
37.878kHz
46.875kHz
48.076kHz
48.362kHz
56.474kHz
60.024kHz
63.979kHz
79.974kHz
31.468kHz
35.000kHz
49.724kHz
VESA
SVGA 800 × 600
XGA
1024 × 768
SXGA 1280 × 1024
720 × 400
640 × 480
832 × 624
VGATEXT
Macintosh
19 APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTOR PIN ASSIGNMENT
ꢀ
D-Sub mini 15pin
Connector
Pin
1
Pin
9
Input Signal
Input Signal
Red video
+5V
2
10 Ground
11
12 Data line (SDA)*
Green video
Blue video
NC
3
4
NC
5
Ground
H-Sync
13
14
15
6
Red video ground
Green video ground
Blue video ground
V-Sync
7
Clock line (SCL)*
8
* Compliant to VESADDC.
ꢀ DVI-D24pin
Input Signal
Pin
1
Input Signal
T.M.D.S Data 2–
T.M.D.S Data 2+
Pin
13
14
Connector
+5V
2
1
9
8
16
24
3
T.M.D.S Data 2 Ground
15 Ground
17
4
16 Hot Plug Detect
17 T.M.D.S Data 0–
18 T.M.D.S Data 0+
19 T.M.D.S Data 0 Ground
20
DVI-D
5
6
Clock line (SCL) *
Data line (SDA) *
V-Sync
7
8
9
T.M.D.S Data 1–
T.M.D.S Data 1+
21
10
11
12
22 T.M.D.S Clock Ground
23 T.M.D.S Clock +
24 T.M.D.S Clock –
T.M.D.S Data 1 Ground
* Compliant to VESADDC.
APPENDIX 20
Download from Www.Somanuals.com. All Manuals Search And Download.
|