|
ꢀꢁꢂ
IBM C400 PROJECTOR
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁꢂ
IBM C400 PROJECTOR
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Before using this information and the product it supports, read the information in
First Edition (June 2004)
© Copyright International Business Machines Corporation 2004. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
© Copyright IBM Corp. 2004
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto lea la información de seguridad.
© Copyright IBM Corp. 2004
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety guidelines
Always observe the following precautions to reduce the risk of injury and property
damage.
Service
Do not attempt to service a product yourself unless instructed to do so by the IBM
Support Center. Use only an IBM authorized service provider who is approved to
repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are
referred to as Customer Replaceable Units, or CRUs. IBM expressly identifies CRUs
as such, and provides documentation with instructions when it is appropriate for
customers to replace those parts. You must closely follow all instructions when
performing such replacements. Always make sure that the power is turned off and
that the product is unplugged from any power source before you attempt the
replacement. If you have any questions or concerns, contact the IBM Support
Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product
manufacturer.
Never wrap a power cord around the power adapter or other object. Doing so can
stress the cord in ways that can cause the cord to fray, crack or crimp. This can
present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or
pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your
cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with
liquid cleansers. Liquids can cause a short circuit, particularly if the cord or power
adapter has been stressed by misuse. Liquids can also cause gradual corrosion of
the power cord terminals and/or the connector terminals on the adapter which can
eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that
all power cord connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or
shows signs of overheating (such as deformed plastic) at the ac input or anywhere
on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs
of corrosion or overheating or where the power cord appears to have been
damaged in any way.
© Copyright IBM Corp. 2004
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and
power strips that you use are rated to handle the electrical requirements of the
product. Never overload these devices. If power strips are used, the load should
not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and
input ratings.
Plugs and outlets
If a receptacle (power outlet) that you intend to use with your computer
equipment appears to be damaged or corroded, do not use the outlet until it is
replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer
to obtain a replacement.
Some products are equipped with a three-pronged plug. This plug fits only into a
grounded electrical outlet. This is a safety feature. Do not defeat this safety feature
by trying to insert it into a non-grounded outlet. If you cannot insert the plug into
the outlet, contact an electrician for an approved outlet adapter or to replace the
outlet with one that enables this safety feature. Never overload an electrical outlet.
The overall system load should not exceed 80 percent of the branch circuit rating.
Consult an electrician for more information if you have questions about power
loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible,
and located close to the equipment. Do not fully extend power cords in a way that
will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully
Batteries
All IBM personal computers contain a non-rechargeable coin cell battery to provide
power to the system clock. In addition many mobile products such as Thinkpad
notebook PCs utilize a rechargeable battery pack to provide system power when in
portable mode. Batteries supplied by IBM for use with your product have been
tested for compatibility and should only be replaced with IBM approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate
batteries or short circuit the metal contacts. Do not expose the battery to water or
other liquids. Only recharge the battery pack strictly according to instructions
included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause
gasses or flame to “vent” from the battery pack or coin cell. If your battery is
damaged, or if you notice any discharge from your battery or the buildup of
foreign materials on the battery leads, stop using the battery and obtain a
replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some
rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused
in a discharged state could increase the risk of a battery short circuit, which could
viii IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
shorten the life of the battery and can also pose a safety hazard. Do not let
rechargeable Lithium-Ion batteries completely discharge or store these batteries in a
discharged state.
Heat and product ventilation
Computers generate heat when turned on and when batteries are charging.
Notebook PCs can generate a significant amount of heat due to their compact size.
Always follow these basic precautions:
v Do not leave the base of your computer in contact with your lap or any part of
your body for an extended period when the computer is functioning or when
the battery is charging. Your computer produces some heat during normal
operation. Extended contact with the body could cause discomfort or, potentially,
a skin burn.
v Do not operate your computer or charge the battery near flammable materials or
in explosive environments.
v Ventilation slots, fans and/or heat sinks are provided with the product for safety,
comfort, and reliable operation. These features might inadvertently become
blocked by placing the product on a bed, sofa, carpet, or other flexible surface.
Never block, cover or disable these features.
CD and DVD drive safety
CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or
otherwise physically damaged, it is possible for the disc to break apart or even
shatter when the CD drive is in use. To protect against possible injury due to this
situation, and to reduce the risk of damage to your machine, do the following:
v Always store CD/DVD discs in their original packaging
v Always store CD/DVD discs out of direct sunlight and away from direct heat
sources
v Remove CD/DVD discs from the computer when not in use
v Do not bend or flex CD/DVD discs, or force them into the computer or their
packaging
v Check CD/DVD discs for cracks before each use. Do not use cracked or
damaged discs
General safety guidelines ix
Download from Www.Somanuals.com. All Manuals Search And Download.
x
IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering your option
Thank you for purchasing this IBM® product. Please take a few moments to
register your product and provide us with information that will help IBM to better
serve you in the future. Your feedback is valuable to us in developing products
and services that are important to you, as well as in developing better ways to
communicate with you. Register your option on the IBM Web site at
IBM will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further
information.
© Copyright IBM Corp. 2004
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
xii IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Product description
The IBM C400 PROJECTOR projects a bright, quality image that enables you to
make professional presentations. Being lightweight and compact in size the C400 is
a great departmental solution and allows you to move it easily from the
boardroom to the conference room, or to customer locations. Some main features of
this projector are:
v Extremely powerful, lightweight, and portable at 3.1 kg (6.8 lbs).
v Sharp and clear images with a high contrast ratio of 1200:1
v Asset management: Remotely check the status of your C400 PROJECTOR via a
Web browser (password protected), through an RJ-45 connection (lamp life and
technical status), or have projector send proactive e-mail to your projector
administrator.
v Beautiful reproduction of high-quality images from your PC and other media
sources (i.e.: DVD Player).
Packing checklist
In addition to this user’s guide, your option package contains the following:
© Copyright IBM Corp. 2004
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1-1. Standard Accessories
ꢀ1ꢁ Projector
ꢀ2ꢁ Remote control
ꢀ3ꢁ Batteries
ꢀ4ꢁ User’s guide (and installation) CD
ꢀ5ꢁ Multi-language quick start guide
ꢀ6ꢁ Carrying case
ꢀ7ꢁ Audio cable (Mini Jack- RCA)
ꢀ8ꢁ Power cord
ꢀ9ꢁ Video cable (S-video)
ꢀ10ꢁ USB Cable (USB-Mini USB)
1-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ11ꢁ Computer cable (DVI-I)
ꢀ12ꢁ Video cable (RCA- RCA)
If any of the items listed above are missing or damaged, contact your place of
purchase.
Note: Be sure to retain your proof of purchase; it will be required to receive
warranty service.
For information on optional accessories for your projector, go to the
Important:
v Avoid using the projector in dusty environments
v Leave the power cable plugged in (for 2-5 minutes) until the projector returns to
room temperature before placing the projector inside the soft case. Placing the
projector into the case too soon after switching off the power could cause the
projector to overheat and will shorten lamp life.
v Be sure to attach the lens cap and place the projector into the soft case with the
lens facing upward to avoid damaging the lens.
Projector features
The figures below show the different views and features of the projector.
Figure 1-2. Front view of projector
ꢀ1ꢁ Zoom
ꢀ2ꢁ On-Screen Display (OSD) buttons and Light-emitting diodes (LEDs)
ꢀ3ꢁ Remote control receiver (IR)
ꢀ4ꢁ Speaker
ꢀ5ꢁ Elevator foot adjuster button
ꢀ6ꢁ Elevator foot
ꢀ7ꢁ Focus ring
Chapter 1. Product description 1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1-3. Side view of projector
ꢀ1ꢁ Security lock slot
ꢀ2ꢁ AC power socket
ꢀ3ꢁ Elevator foot adjuster button
ꢀ4ꢁ Elevator foot
ꢀ5ꢁ Focus ring
Figure 1-4. OSD buttons and LEDs
ꢀ1ꢁ Ready LED
ꢀ2ꢁ Source button
ꢀ3ꢁEnter button
ꢀ4ꢁ Keystone/Up cursor button
ꢀ5ꢁ Volume/right cursor button
ꢀ6ꢁ Menu button
1-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ7ꢁ Keystone/Down cursor button
ꢀ8ꢁVolume/left cursor button
ꢀ9ꢁAuto button
ꢀ10ꢁPower button
ꢀ11ꢁ Power LED
Figure 1-5. Rear view of projector
ꢀ1ꢁ Local Area Network RJ-45
ꢀ2ꢁ RS-232
Note: This is a service port and is not intended for personal use.
ꢀ3ꢁ Monitor out
ꢀ4ꢁ DVI-I
ꢀ5ꢁ Composite video
ꢀ6ꢁ S-video
Note: If your video equipment has both S-video and RCA (composite video) jacks, connect
to the S-video connector for optimal signal quality.
ꢀ7ꢁAudio-in
ꢀ8ꢁAudio-out
ꢀ9ꢁUSB
Chapter 1. Product description 1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1-6. Bottom view of projector
ꢀ1ꢁ Front elevator feet
ꢀ2ꢁ Elevator foot adjuster buttons
ꢀ3ꢁ Ceiling support mounting holes
ꢀ4ꢁ Projection lamp cover
1-6 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Setting up the projector
This chapter provides information on positioning the projector, connecting a
computer source and displaying and adjusting an image.
Starting the projector
To start the projector, do the following:
1. Connect the power cord to the projector as shown below. Connect the other
end of the cord to an electrical outlet. The Power and Lamp-ready LEDs turn
on.
2. Remove the lens cover.
3. Attach the input devices.
4. Turn on the connected input devices.
5. Be sure that the Power LED is on (not flashing) amber and then press the
Power button to turn on the projector.
The projector display window opens and the projector detects connected
devices. If you connected the projector to an IBM computer, press Fn+F7 on the
computer to switch the display output to the projector. If you connected the
projector to a non-IBM computer, refer to the documentation that came with
your computer for information on how to change the display output.
Attention: Do not look directly into the projection lens when the lamp is
turned on. The bright light might harm your eyes.
6. If you have connected more than one input device to the projector, toggle the
Source button to change devices. (DVD and HDTV are supported through the
DVI-I cable connector.)
Attention: Before moving the projector, be sure to power down the projector
normally and disconnect the projector from the main power source. See “Turning
Turning off the projector
To turn off the projector, do the following:
1. Press the Power button.
© Copyright IBM Corp. 2004
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
The projector prepares for shut-down and the Wait a moment message displays,
as shown below. The projector turns off automatically within 5 seconds.
Note: This operation can be cancelled by pressing a button other than the
Power button. Pressing the Power button again will turn off power.
Note: Leave the power cable plugged in for at least 2-5 minutes until the
projector returns to room temperature before placing the projector inside
the soft case. Placing the projector into the case too soon after turning off
the power could cause the projector to overheat.
2. Press the Power button when the Power Off?/Press Power again message
displays, as shown below.
The projector turns off.
Positioning the projector
To determine where to position the projector, consider the size and shape of your
screen, the location of your power outlets, and the distance between the projector
and the rest of your equipment. Following are some general guidelines:
v Position the projector on a flat surface at a right angle to the screen. The
projector must be at least 1.5 m (4.9 ft) from the projection screen.
v Position the projector within 2.7 m (9 ft) of your power source and within 1.8 m
(6 ft) of your video device (unless you purchase extension cables). To ensure
adequate cable access, do not place the projector within .15 m (6 in.) of a wall or
other object.
v Position the projector the desired distance from the screen. The distance from the
lens of the projector to the screen, the zoom setting, and the video format
determine the size of the projected image.
Attention: Ensure that projector air flow is sufficient and not blocked or using
recirculated air. Please also ensure that the projector is not in a confined space.
2-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2-1. Image height
Figure 2-2. Image width
Table 2-1.
Projection distance
Image Width
Diagonal image size Image height
ꢀ1ꢁ
ꢀ2ꢁ
ꢀ3ꢁ
ꢀ4ꢁ
(m/ft)
(m/in.)
(m/in.)
(m/in.)
1.5 m/4.92 ft
2.0 m/6.56 ft
2.4 m/7.87 ft
2.8 m/9.18 ft
3.2 m/10.5 ft
3.6 m/11.81 ft
4.0 m/13.12 ft
4.4 m/14.43 ft
4.8 m/15.74 ft
5.2 m/17.06 ft
5.6 m/18.37 ft
5.0 m/19.68 ft
10.0 m/32.8 ft
1.1 m/42.5 in.
1.4 m/56.7 in.
1.7 m/67.7 in.
2.0 m/79.1 in.
2.3 m/90.5 in.
2.6 m/101.9 in.
2.9 m/113.4 in.
3.2 m/124.8 in.
3.5 m/135.8 in.
3.7 m/147.2 in.
4.0 m/158.7 in.
4.3 m/170.1 in.
7.2 m/283.5 in.
0.9 m/33.8 in.
1.2 m/45.3 in.
1.4 m/53.9 in.
1.6 m/62.9 in.
1.8 m/72.4 in.
2.1 m/81.5 in.
2.3 m/90.6 in.
2.5 m/99.6 in.
2.8 m/108.7 in.
3.0 m/117.7 in.
3.2 m/126.8 in.
3.5 m/135.8 in.
5.8 m/226.8 in.
0.7 m/25.6 in.
0.9 m/34.0 in.
1.0 m/40.5 in.
1.2 m/47.4 in.
1.4 m/54.3 in.
1.5 m/61.0 in.
1.7 m/68.1 in.
1.9 m/74.8 in.
2.1 m/81.6 in.
2.2 m/88.2 in.
2.4 m/95.3 in.
2.6 m/101.9 in.
4.3 m/170.1 in.
Chapter 2. Setting up the projector 2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the projector level and height
To adjust the projector level and height, complete the following procedure:
1. To raise the height of the projector, lift the projector ꢀ1ꢁand press the
height-adjuster buttons ꢀ2ꢁ. The elevator foot ꢀ3ꢁdrops down.
2. To make minor adjustments to the height, rotate the elevator footꢀ4ꢁ as shown
below.
3. To lower the level of the projector, press the height-adjuster button and press
down on the top of the projector.
Note:
v The projector table or stand should be level and sturdy.
v Position the projector so that it is perpendicular to the screen.
v Be sure the cables are not in a place where they can knock over the
projector.
Adjusting the image
To adjust the zoom, focus, and keystone for the image, do the following:
2-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Twist the rings on the projector to adjust the focus ꢀ1ꢁ and zoom ꢀ2ꢁ, as shown
below.
2. Use the Keystone buttons on the projector or the remote to correct
image-trapezoid (wider top or bottom) effect. The Keystone buttons on the
remote and projector are shown below.
The keystone control appears on the On Screen Display (OSD), as shown.
Adjusting the volume
To adjust the volume, do the following:
1. Press the Volume +/- buttons on the projector or the remote control. The
volume control appears on the OSD.
Chapter 2. Setting up the projector 2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the Volume +/- buttons shown below to adjust the level.
3. Press the Mute button (on the remote control only) to turn off the volume.
4. Press any Volume +/- buttons on the projector or remote control to turn off
mute.
2-6 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Connecting devices to the projector
This chapter provides information on connecting devices to the C400 projector.
Connecting devices
Computers and video devices can be connected to the projector at the same time.
Refer to the documentation that comes with the connecting device to verify that
the device has the appropriate output connector.
ꢀ1ꢁ Local Area Network RJ-45
ꢀ2ꢁ RS-232
Note: This is a service port and is not intended for personal use.
ꢀ3ꢁ Monitor out
ꢀ4ꢁ DVI-I
ꢀ5ꢁ Composite video
ꢀ6ꢁ S-video
Note: If your video equipment has both S-video and RCA (composite video) jacks, connect
to the S-video connector for optimal signal quality.
ꢀ7ꢁAudio-in
ꢀ8ꢁAudio-out
ꢀ9ꢁUSB
© Copyright IBM Corp. 2004
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a USB device
To control your computer mouse using the projector remote control, connect the
projector to the computer with a USB cable as shown below.
Note: USB mouse function is only supported with Windows 2000 and Windows
XP.
Connecting to a computer monitor
If you are using a desktop computer and want to see the image on your computer
screen as well as on the projection screen, plug the monitor cable to the Monitor
out connector on the projector.
3-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Using the projector features
This chapter provides information on installing the remote control batteries and on
using the remote control, audio, keypad buttons, and other projector features.
Before you begin
Before you can use the remote control, you must install the AAA batteries that
come with this projector. To install the batteries, do the following:
Note:
v Use only AAA alkaline batteries.
v Dispose of used batteries according to local government ordinance
regulations.
v Remove the batteries when not using the remote control for prolonged
periods.
1. Remove the battery compartment cover from the remote control as shown.
2. Insert the supplied batteries into the remote control battery compartment,
aligning the polarity (+/-) of the batteries with the polarity icons in the
compartment, as shown.
© Copyright IBM Corp. 2004
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Replace the cover, as shown.
Using the remote control
The figure below provides an illustration of the remote.
CAUTION:
To reduce the risk of injury to the eyes, do not look directly into the remote
control laser light and do not point the laser light into anyone’s eyes. The
remote control is equipped with a Class II laser that emits radiation.
ꢀ1ꢁ Laser
ꢀ2ꢁ IR transmitter
ꢀ3ꢁ Status LED
ꢀ4ꢁ Auto
ꢀ5ꢁ Blank
ꢀ6ꢁ Enter
ꢀ7ꢁ Up cursor
ꢀ8ꢁ Right cursor
ꢀ9ꢁ Cursor pad
ꢀ10ꢁ Keystone top
ꢀ11ꢁ Keystone bottom
ꢀ12ꢁ Mute
ꢀ13ꢁ Right mouse
ꢀ14ꢁ Left mouse
ꢀ15ꢁ Volume down
ꢀ16ꢁ Volume up
ꢀ17ꢁ Down cursor
ꢀ18ꢁ Left cursor
ꢀ19ꢁ Menu
ꢀ20ꢁ Freeze
ꢀ21ꢁ Source
ꢀ22ꢁ Power
4-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating range
This remote control uses infrared transmission to control the projector. It is not
necessary to point the remote directly at the projector. The remote control will
function within a maximum radius of 10m (32.8 ft) and 30° above or below the
projector level. If the projector does not respond to the remote control, please see
Note: The remote will still work when it is pointed at the projected image.
Projector and remote control buttons
The projector can be operated using the remote control or the buttons on the top of
the projector. All operations can be carried out with the remote control. The figure
below shows the corresponding buttons on the remote control and on the projector
for OSD menu operation.
ꢀ1ꢁ Menu
ꢀ2ꢁ Left button
ꢀ3ꢁ Down button
ꢀ4ꢁ Right button
ꢀ5ꢁ Up button
ꢀ6ꢁ Enter button
Chapter 4. Using the projector features 4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
4-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. On-Screen Display menu controls
This projector has an On-Screen Display (OSD) that lets you make image
adjustments and change various settings.
Note: You must have a display on the screen in order to access the OSD.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to
navigate and make changes to the OSD. The following sections show the menus in
the OSD.
Language
To set the OSD language, do the following:
Note: The default OSD language is English.
1. Press the Menu button. The Language menu displays.
2. Press the cursor left/right buttons until Language is highlighted.
3. Press the cursor up/down buttons until the language you want is highlighted.
4. Press Enter to select the language.
5. Press the Menu button twice to close the OSD.
The image below shows the Language menu. The default language is English.
Quality menu
The Quality menu can be found through the main menu. To access the Quality
menu, follow these steps:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Quality menu.
© Copyright IBM Corp. 2004
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the cursor up/down button to move up and down in the Quality menu.
The Quality menu is shown below.
The following table shows the options that you will see in the Quality menu and
the default.
Item
Description
Default
Brightness
Press the cursor left/right button 50
to adjust the brightness.
Range: 0 to 100
Contrast
Press the cursor left/right button 50
to adjust the contrast.
Range: 0 to 100
Sharpness
Press the cursor left/right button
to adjust the display sharpness.
3
Range: 1 to 5
Color Temperature
Color Saturation
Color Tint
Press the cursor left/right button Normal
to adjust the video tint/hue.
Range: Cool/Normal/Warm
Press the cursor left/right button 50
to adjust the video saturation.
Range: 0 to 100
Press the cursor left/right button 50
to adjust the video tint/hue.
Range: 0 to 100
5-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Default
Gamma
Press the cursor left/right button PC
to adjust the gamma correction
of the display.
Input/Gamma/Brightness:
PC/2.2/High, MAC/1.8/High,
Video/2.4/Low, Chart/2.2/Low,
B&W/2.4/High
Color Space
Cancel
Press the cursor left/right button Auto
to adjust the color space.
Range: Auto/RGB/YpbPr/YCbCr
Press the enter button to reset
Brightness, Contrast, Sharpness,
Color Temperature, Color
Saturation, Color Tint, Gamma,
and Color Space to default
values.
Not applicable
Properties menu
The Properties menu can be found through the main menu. To access the
Properties menu, follow these steps:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Properties menu.
3. Press the cursor up/down button to move up and down in the Properties
menu. The Properties menu is shown below.
The following table shows the options that you will see in the Properties menu
and the default.
Chapter 5. On-Screen Display menu controls 5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Default
Horizontal position
Press the cursor left/right button 50
to move the image left or right.
Range: 0 to 100
Vertical position
Keystone
Press the cursor left/right button 50
to move the image up or down.
Range: 0 to 100
Press the cursor left/right button
to correct distortion of the
projected image.
0
Range: -50 to 50
Aspect Ratio
Press the cursor left/right button 4:3
to toggle between the 4:3
standard format and 16:9 high
Definition TV (HDTV) format.
Range: 4.3/16.9
Digital Zoom
Cancel
Press the Enter button to increase Not applicable
or reduce image size.
Press the enter button to reset
Aspect ratio and Digital Zoom to
default values.
Not applicable
Options menu
To access the Options menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Options menu.
3. Press the cursor up/down button to move up and down within the Options
menu. The Options menu is shown below.
5-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
The following table shows the options that you will see in the Options menu and
the default.
Item
Description
Default
Blank Screen
Press the cursor left/right button Blue
to select a background color for
blank screen.
Range:
Black/Red/Green/Blue/White
Auto Source
Press the cursor left/right button On
to enable or disable automatic
source detection.
Range: On/Off
Auto Power Off
Press the cursor left/right button Off
to disable automatic shutdown of
lamp after 10 minutes of
inactivity.
Range: On/Off
Volume
Press the cursor left/button to
adjust the audio volume.
4
Range: 0 - 8
Menu Position
Press the cursor left/right button Center
to position the OSD on screen.
Range:
Left/Right/Center/Down/Up
Menu Display
Press the cursor left/right button 15 seconds
to determine timeout delay of
OSD.
Range: 10-30 seconds
Translucent Menu
Cancel
Press the cursor up/down button Off
to set menu screen translucency.
Range: On/Off
Resets Auto Power-Off, Volume, Not applicable
Menu Position, Menu Display,
and Translucent Menu to default
values.
Setup menu
To access the View menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the left/right cursor to move to the Setup menu.
3. Press the cursor up/down button to move up and down in the Setup menu.
The Setup menu with a single input and the Setup menu with a dual input are
shown below.
Chapter 5. On-Screen Display menu controls 5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5-1. Setup Menu with single input
Figure 5-2. Setup Menu with dual input
The following table shows the options that you will see in the Setup menu and the
default.
Item
Description
Default
Video type
Press the cursor right/left button Auto
to select the Video standard.
Range:
Auto/NTSC/PAL/SECAM
5-6 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Default
Video automatic gain control
(AGC)
Press the cursor right/left button On
to enable or disable AGC for
video source.
Range: On/Off
Projection
Press the cursor left/right button Desktop mount,
to select from four projection
methods.
front of screen
Range: Desktop mount, front of
screen/Desktop mount, rear of
screen/Ceiling mount, front of
screen/Ceiling mount, rear of
screen
Frequency
Tracking
Pip Size
Press the cursor left/right button Auto detected
to adjust the A/D sampling
clock.
Range: 0-100
Press the cursor left/right button Auto detected
to adjust the A/D sampling
number.
Range: 0-100
Press the cursor left/right button Off
to adjust the secondary image
size.
Note: Pip Size is only available
when the projector is connected
to dual input sources.
Range:
Off/Small/Medium/Large
Pip Position
Pip Input
Cancel
Press the cursor left/right button Upper Left
to adjust the secondary image
location.
Note: Pip Position is only
available when the projector is
connected to dual input sources.
Range: Upper left to lower right
Press the cursor left/right button Auto
to adjust the secondary image
source.
Note: Pip Input is only available
when the projector is connected
to dual input sources.
Range: Auto/Video/S-video
Resets Video Type, Video AGC,
and Projection to default values.
N/A
Information menu
To access the Information menu, follow the steps below:
1. Press the Menu button to open the main menu.
Chapter 5. On-Screen Display menu controls 5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the cursor left/right button to move to the Information menu.
3. Press the cursor up/down button to move up and down in the Information
menu. The Information menu is shown below.
The following table shows the options that you will see in the Information menu.
Item
Description
Video Information
Displays the resolution and refresh rate of
the connected video device.
Software Version
Displays information about the firmware
version information.
Lamp Hours
Displays lamp hours used information.
Displays Network DHCP status information.
Displays IP address information.
Network DHCP
Network IP Address
Network Setting
Lamp Mode
Displays the Network Setting menu.
Toggles between Normal and ECO lamp
modes. ECO mode uses less power but
decreases the lamp brightness
Lamp Hour Reset
Cancel
Reset this item after replacing the lamp. For
more information, refer to “Replacing the
Resets Lamp Mode to the default setting.
Network Setting menu
To access the Network Setting menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Information men.
3. Press the cursor up/down button to move to Network Setting in the
Information menu.
4. Press the cursor left/right button or the Enter button to select the Network
Setting menu. An example Network Setting menu is shown below.
5-8 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
IP Address State
Press the cursor left/right button to choose
between Static and DHCP settings. In Static,
the user can enter IP Address, Subnet Mask,
Default Gateway, and DNS Server. In DHCP,
the projector will have IP Address, Subnet
Mask, Default Gateway, and DNS Server set.
Note: The default setting is DHCP.
IP Address
Press the cursor up/down button to change
the IP Address.
Note: The IP address can only be changed
when the IP Address State is Static.
Subnet Mask
Default Gateway
DNS Server
Press the cursor up/down button to change
the Subnet Mask.
Note: The Subnet Mask can only be
changed when the IP Address State is Static.
Press the cursor up/down button to change
the Default Gateway.
Note: The Default Gateway can only be
changed when the IP Address State is Static.
Press the cursor up/down button to change
the DNS Server address.
Note: The DNS Server can only be changed
when the IP Address State is Static.
Apply Settings
Select this to save and apply the settings.
Chapter 5. On-Screen Display menu controls 5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
5-10 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Remote network operation
When connected to a Local Area Network (LAN) by means of the RJ-45 connector,
the projector can be controlled remotely through a Web browser by any of the
clients (PCs connected to the LAN) on the LAN. The projector can also be accessed
outside the LAN, provided a firewall is configured accordingly.
Note: The factory default is set to DHCP for the projector. You can see the current
IP address in the Information menu.
Remote interface overview
The following shows the remote interface main screens.
© Copyright IBM Corp. 2004
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
v Remote: This screen shows the current status of the projector.
v Remote-2: This screen is used to control the projector.
6-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
v Administrator Settings: This screen allows the administrator to set a password
and limit the connections to the projector.
v IP Settings: This screen allows the IP address to be set for static or DHCP.
v E-mail settings:Status messages for the projector can be e-mailed to the
administrator or any other address.
Some servers require a sender address, otherwise the e-mail is blocked. So, in
most cases the Sender and Receiver addresses will be the same.
Chapter 6. Remote network operation 6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
The projector automatically e-mails status messages such as IP address and
Power state to the Receiver address. The projector cannot receive e-mails.
Setting up remote operation
You should know some or all of the following address settings:
v IP Address
v Subnet Mask
v Default Gateway
v DNS Server
v E-mail address for remote PC
v Password (if required) for remote PC
v Outgoing server (SMTP) for remote PC
Note: Using a proxy server for your LAN may filter messages from the projector.
Disable the proxy server to prevent this.
6-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
The factory default is set to DHCP for the projector. You can see the current IP
address in the Information menu.
You can change the settings in the Network Setting menu. To access the Network
Setting menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Information menu.
3. Press the cursor up/down button to move to Network Setting in the
Information menu.
4. Press the Enter button to access the Network Setting menu. The Netowrk
Setting menu is shown below.
Using the DHCP address settings
Set the IP Setting to DHCP if you are using a DHCP server that will assign an IP
address to the projector.
Chapter 6. Remote network operation 6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Enter the address of the projector in the address bar of your browser. Example:
The Remote page opens.
2. Click IP Settings.
3. Check the DHCP Address radio button and click Set.
Enabling and disabling passwords
The default setting is Disable and no password has been set.
6-6 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Click Administrate Settings. The Administrate Settings page opens.
2. Check the Enable radio button and then click Set
OR
Click the Disable radio button and then click Set.
3. Click your browser back button to go to the Input PASSWORD box.
4. Enter the password and click Login.
Setting the maximum connections
Refer to the following to limit the amount of users that can log on to the projector.
Chapter 6. Remote network operation 6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Make sure the Enable radio button (next to Security Status) is selected and
click Set.
2. In the Input Password screen, click Forgot your Password?
3. Enter your e-mail address and click Send.
4. The current projector password is e-mailed to you.
Chapter 6. Remote network operation 6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
6-10 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Maintenance
This chapter provides information on projector maintenance.
Cleaning the projector
Cleaning the projector to remove dust and grime will help ensure trouble-free
operation.
v Be sure to turn off and unplug the projector at least 1 hour before cleaning.
Failure to do so could result in a severe burn.
v Use only a dampened cloth when cleaning. Do not allow water to enter the
ventilation openings on the projector.
v If a little water gets into the projector interior while cleaning, leave it unplugged
in a well-ventilated room for several hours before using.
v If a lot of water gets into the projector interior when cleaning, have the projector
serviced.
Cleaning the lens
To clean the lens, complete the following procedure:
1. Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Note: Avoid using an excessive amount of cleaner, and do not apply the
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh
chemicals might scratch the lens.
2. Lightly wipe the cleaning cloth over the lens in a circular motion. If you do not
intend to use the projector immediately, replace the lens cap.
Cleaning the case
Follow the steps below to clean the projector case:
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as dish
detergent), and wipe the case.
3. Rinse all detergent from the cloth and wipe the case again.
Note: To prevent discoloration or fading of the case, do not use abrasive
alcohol-based cleaners.
Replacing the projector lamp
The projector lamp should only be replaced with an IBM certified replacement
To replace the projector lamp, complete the following procedure:
1. Turn off the projector, unplug the power cord, and allow the projector to cool
for at least 1 hour.
© Copyright IBM Corp. 2004
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use a Phillips-head screwdriver to remove the screw from the lamp
compartment cover as shown in ꢀ1ꢁ.
3. Remove the lamp compartment cover as shown in ꢀ2ꢁ.
4. Remove the two screws from the lamp module as shown in ꢀ3ꢁ.
5. Lift the module handle up and pull up firmly as shown in ꢀ4ꢁ.
6. Reverse steps 1 through 5 to install the new lamp module.
A-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The lamp module should be oriented as shown below when replacing.
Attention: This product contains a Metal Arc Lamp, which contains Mercury.
Dispose of it as required by local ordinances and regulations.
The USA restricts or prohibits the disposal of some or all lamps containing
information on specific state disposal requirements and recycling facilities.
For users in Connecticut, please call Northeast Lamp Recycling toll-free at
1-888-657-5267 to place an order for the delivery of a kit that includes a box for the
lamp, tape, and a return shipping label.
Resetting the lamp timer
After replacing the lamp, you should reset the lamp hour counter to zero. Please
follow the steps below.
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Information menu.
3. Press the cursor up/down button to move down to Lamp Hour Reset.
4. Press Enter to select Lamp Hour Reset.
The OSD will show ″Please see User Manual...″
5. Press the buttons on the remote or on the projector in the following order:
Down Arrow, Up Arrow, Left Arrow, Right Arrow. This will confirm the lamp
hour reset.
Attention: Lamp Life is a measure of brightness degradation only, and is not a
specification for the time it takes a lamp to fail and cease light output. Lamp Life
is defined as the time it takes for more than 50% of a lamp sample population to
have brightness decrease by approximately 50% of the rated lumens for the
specified lamp. For example, if the defined life of your lamp is 1500 hours and its
brightness is rated at 2650 lumens, then there is a 50% chance that over 1500 hours
of run time, your lamp will have decreased its brightness by 50% to approximately
1325 lumens.
Appendix A. Maintenance A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Troubleshooting
The guidelines below provide tips to deal with problems you may encounter while
using the projector. If the problem remains unsolved, contact your dealer for
assistance.
Common problems and solutions
Check the following before proceeding to the problem-specific solutions.
v Us a different electrical device to confirm that the electrical outlet is working.
v Ensure that the projector is turned on.
v Ensure all connections are securely attached.
v Ensure the attached device is turned on.
v Ensure a connected PC is not in suspend mode.
v Ensure a connected notebook computer is configured for an external display.
This is usually done by pressing an Fn-key combination on the notebook.
Tips for troubleshooting
In each problem-specific section, try the steps in the order suggested. This may
help you to solve the problem faster.
Try to pinpoint the problem and thus avoid replacing non-defective parts. For
example, if you replace batteries and the problem remains, put the original
batteries back and go to the next step.
Keep a record of the steps you take when troubleshooting. The information may be
useful when calling for technical support or for service personnel.
Troubleshooting information
The following table provides troubleshooting information for the projector. In some
cases, more than one possible solution is provided. Try the solutions in the order
they are presented. When the problem is solved, you can skip the additional
solutions.
Table B-1. Troubleshooting
Problem
Solution
No image appears on the screen.
v Make sure your computer and projector are turned
on.
v Verify the settings on your notebook or desktop PC.
v Turn off all equipment and power up again in the
correct order.
© Copyright IBM Corp. 2004
B-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table B-1. Troubleshooting (continued)
Problem
Solution
The image is blurred
v Adjust the Focus on the projector.
v Press the Auto button on the remote control or the
projector.
v Ensure the projector-to-screen distance is within the
range specified.
v Check that the projector lens is clean.
v Make sure the output resolution from the PC is 1024
x 768, the native resolution of the projector.
The image is wider at the top or
bottom (trapezoid effect).
v Position the projector so it is as perpendicular to the
screen as possible.
v Use the Keystone button on the remote control or
projector to correct the problem.
The image is reversed or upside
down.
Check the Projection setting on the Setup menu of the
OSD.
The image is streaked.
v Set the Frequency and Tracking settings on the Setup
menu of the OSD to the default settings.
v To ensure the problem is not caused by a connected
PC’s video card, connect to another computer.
The image is flat with no contrast Adjust the Contrast setting on the Main menu of the
OSD.
The color of the projected image
Adjust the Color Temp. and Gamma settings on the
does not match the source image ColorMgr menu of the OSD.
There is no light from the
projector
v Check that the power cable is securely connected.
v Ensure the power source is good by testing with
another electrical device.
v Restart the projector in the correct order and check
that the Power LED is green.
v If you have replaced the lamp recently, try resetting
the lamp connections. Make sure the lamp cover is
flush with the projector case when closed.
v Replace the lamp module.
v Put the old lamp back in the projector and have the
projector serviced.
The lamp goes off.
v Power surges can cause the lamp to turn off. Press
the Power button twice to turn off the projector.
When the Lamp Ready LED is on, press the Power
button.
v Replace with a new lamp module.
v Put the old lamp back in the projector and have the
projector serviced.
B-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table B-1. Troubleshooting (continued)
Problem
Solution
The projector does not respond to
the remote control.
v Direct the remote control towards the remote sensor
on the projector.
v Ensure the path between remote and sensor is not
obstructed.
v Turn off any fluorescent lights in the room.
v Check the battery polarity.
v Replace the batteries.
v Turn off other Infrared-enabled devices in the
vicinity.
v Have the remote control serviced.
There is no sound.
v Adjust the volume on the remote control.
v Adjust the volume of the audio source.
v Check the audio cable connection.
v Test the source audio output with other speakers.
v Have the projector serviced.
The sound is distorted.
v Check the audio cable connection.
v Test the source audio output with other speakers.
v Have the projector serviced.
Projector LEDs
The LED on top of the projector indicates the state of the projector and can help
you troubleshoot. There are two-second pauses between the blinking cycles. For
more details on LED projector errors, contact your IBM representative.
Table B-2. Lamp-ready LED error messages
Lamp-ready LED number of flashes Explanation
Flashing
Lamp not ready- do not press the power button
until the flashing stops.
1
2
3
4
5
Front cover fan error
Lamp fan error
Power board fan error
Blower fan error
Ballast fan error
Table B-3. Power LED error messages
Power LED number of flashes
Explanation
3
4
5
6
System overheating
System interface error
Lamp error
Fan error. Refer to Lamp-ready LED to determine
which fan.
7
8
Lamp cover open
DLP driver error.
Appendix B. Troubleshooting B-3
Download from Www.Somanuals.com. All Manuals Search And Download.
B-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C. Specifications
Following are specifications for the IBM C400 projector.
Temperature
5° to 35° C (41° to 95° F) at sea level
(non-operating)
-10° to 60° C (14° to 140° F)
3,048 m (0 to 10,000 ft)
Altitude (operating)
Altitude (non-operating)
Humidity (operating)
12,192 m (0 to 40,000 ft)
5% to 90% relative humidity, non-condensing
Humidity (non-operating)
Dimensions
5% to 95% relative humidity, non-condensing
86 mm x 285 mm x 220 mm (3.38 in. x 11.21 in. x 8.66 in.)
(H x W x D)
Weight
3.1 kg (6.8 lbs) unpacked
1.2 - 9.4 m (4 to 31 ft)
Optics (focus range)
Lamp type
250 W lamp
Lumens
2650 lumens (Economy mode: 1850 lumens)
100-240V 4.5A 50/60 Hz
Input power requirements
© Copyright IBM Corp. 2004
C-1
Download from Www.Somanuals.com. All Manuals Search And Download.
C-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D. Service and Support
The following information describes the technical support that is available for your
product, during the warranty period or throughout the life of the product. Refer to
your IBM Statement of Limited Warranty for a full explanation of IBM warranty
terms.
Online technical support
Online technical support is available during the life of your product through the
During the warranty period, assistance for replacement or exchange of defective
components is available. In addition, if your IBM option is installed in an IBM
computer, you might be entitled to service at your location. Your technical support
representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the IBM Support Center will be
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the option
has been withdrawn from marketing. Additional support offerings, including
step-by-step installation assistance, are available for a nominal fee.
To assist the technical support representative, have available as much of the
following information as possible:
v Option name
v Option number
v Proof of purchase
v Computer manufacturer, model, serial number (if IBM), and manual
v Exact wording of the error message (if any)
v Description of the problem
v Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might want
to walk you through the problem during the call.
For the support telephone number and support hours by country, refer to the
following table. If the number for your country or region is not listed, contact your
IBM reseller or IBM marketing representative. Response time may vary depending
on the number and nature of the calls received.
Phone numbers are subject to change without notice. For the latest phone number
© Copyright IBM Corp. 2004
D-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
Country or Region
Telephone Number
Africa
+44 (0) 1475 555 055 Japan
Desktop:
0120-887-870
v Overseas calls:
81-46-266-1084
ThinkPad:
0120-887-874
v Overseas calls:
81-46-266-1084
IntelliStation and
xSeries:
81-46-266-1358
PC Software:
0120-558-695
v Overseas calls:
81-44-200-8666
Argentina
Australia
Austria
0800-666-0011
131-426
Luxembourg
298-977-5063
Malaysia
(60) 3-7727-7800
001-866-434-2080
+44 (0) 1475 555 055
020-514 5770
01-24592-5901
0800-0189
Mexico
Bolivia
Middle East
Netherlands
Belgium
Dutch: 02-210 9820
French: 02-210 9800
55-11-3889-8986
Brazil
New Zealand
Nicaragua
0800-446-149
255-6658
Canada
English:
1-800-565-3344
French:
1-800-565-3344
In Toronto:
416-383-3344
Chile
800-224-488
800-810-1818
Norway
Panama
Peru
66 81 11 00
206-6047
China
China (Hong Kong
and S.A.R.)
Home PC:
852-2825-7799
0-800-50-866
Commercial PC:
852-8205-0333
Colombia
Costa Rica
Denmark
980-912-3021
284-3911
Philippines
Portugal
Russia
(63) 2-995-2225
21-892-7147
45 20 82 00
095-940-2000
Dominican Republic 566-4755
or 566-5161 ext. 8201
Singapore
(65) 1-800-840-9911
Toll Free within the
Dominican Republic:
1-200-1929
Ecuador
1-800-426911 (option Spain
#4)
91-714-7983
D-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
El Salvador
Finland
Telephone Number
250-5696
Country or Region
Sweden
Telephone Number
08-477 4420
09-459 69 60
02 38 55 74 50
07032-1549 201
335-8490
Switzerland
Taiwan
058-333-0900
France
886-2-8723-9799
(66) 2-273-4000
00-800-446-32-041
0-1475-555 055
Germany
Thailand
Guatemala
Honduras
Turkey
Tegucigalpa & Sand
Pedro Sula: 232-4222
United Kingdom
San Pedro Sula:
552-2234
India
1600-44-6666
United States
1-800-IBM-SERV
(1-800-426-7378)
000-411-005-6649
0-800-100-2011
Indonesia
Ireland
Italy
(62) 21-523-8535
01-815-9202
Uruguay
Venezuela
Vietnam
01-815-9202
Ho Chi Minh: (84)
8-829-5160
Hanoi: (84)
4-843-6675
Appendix D. Service and Support D-3
Download from Www.Somanuals.com. All Manuals Search And Download.
D-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E. IBM Statement of Limited Warranty Z125-4753-08
04/2004
Part 1 - General Terms
This Statement of Limited Warranty includes Part 1 - General Terms, Part 2 -
Country-unique Terms, and Part 3 - Warranty Information. The terms of Part 2 replace or
modify those of Part 1. The warranties provided by IBM in this Statement of Limited
Warranty apply only to Machines you purchase for your use, and not for resale. The term
″Machine″ means an IBM machine, its features, conversions, upgrades, elements, or
accessories, or any combination of them. The term ″Machine″ does not include any software
programs, whether pre-loaded with the Machine, installed subsequently or otherwise.
Nothing in this Statement of Limited Warranty affects any statutory rights of
consumers that cannot be waived or limited by contract.
What this Warranty Covers
IBM warrants that each Machine 1) is free from defects in materials and workmanship and
2) conforms to IBM’s Official Published Specifications (″Specifications″) which are
available on request. The warranty period for the Machine starts on the original Date of
Installation and is specified in Part 3 - Warranty Information. The date on your invoice or
sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise.
Many features, conversions, or upgrades involve the removal of parts and their return to
IBM. A part that replaces a removed part will assume the warranty service status of the
removed part. Unless IBM specifies otherwise, these warranties apply only in the country
or region in which you purchased the Machine.THESE WARRANTIES ARE YOUR
EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES OR
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF EXPRESS OR
IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO
YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT
PERIOD. SOME STATES OR JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
What this Warranty Does not Cover
This warranty does not cover the following:
v
any software programs, whether pre-loaded or shipped with the Machine, or
installed subsequently;
v
failure resulting from misuse (including but not limited to use of any Machine
capacity or capability, other than that authorized by IBM in writing), accident,
modification, unsuitable physical or operating environment, or improper
maintenance by you;
v
v
failure caused by a product for which IBM is not responsible; and
any non-IBM products, including those that IBM may procure and provide with
or integrate into an IBM Machine at your request.
The warranty is voided by removal or alteration of identification labels on the
Machine or its parts.
IBM does not warrant uninterrupted or error-free operation of a Machine.
Any technical or other support provided for a Machine under warranty, such as
© Copyright IBM Corp. 2004
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
assistance with "how-to" questions and those regarding Machine set-up and
installation, is provided WITHOUT WARRANTIES OF ANY KIND.
How to Obtain Warranty Service
If the Machine does not function as warranted during the warranty period, contact
IBM or your reseller to obtain warranty service. If you do not register the Machine
with IBM, you may be required to present proof of purchase as evidence of your
entitlement to warranty service.
What IBM Will Do to Correct Problems
When you contact IBM for service, you must follow the problem determination
and resolution procedures that IBM specifies. An initial diagnosis of your problem
can be made either by a technician over the telephone or electronically by access to
an IBM website. The type of warranty service applicable to your Machine is
specified in Part 3 - Warranty Information. You are responsible for downloading
and installing designated Machine Code (microcode, basic input/output system
code (called ″BIOS″), utility programs, device drivers, and diagnostics delivered
with an IBM Machine ) and other software updates from an IBM Internet Web site
or from other electronic media, and following the instructions that IBM provides. If
your problem can be resolved with a Customer Replaceable Unit (″CRU″) (e.g.,
keyboard, mouse, speaker, memory, hard disk drive), IBM will ship the CRU to
you for you to install. If the Machine does not function as warranted during the
warranty period and your problem cannot be resolved over the telephone or
electronically, through your application of Machine Code or software updates, or
with a CRU, IBM or your reseller, if approved by IBM to provide warranty service,
will either, at its discretion, 1) repair it to make it function as warranted, or 2)
replace it with one that is at least functionally equivalent. If IBM is unable to do
either, you may return the Machine to your place of purchase and your money will
be refunded. IBM or your reseller will also manage and install selected engineering
changes that apply to the Machine.
Exchange of a Machine or Part
When the warranty service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement becomes
yours. You represent that all removed items are genuine and unaltered. The
replacement may not be new, but will be in good working order and at least
functionally equivalent to the item replaced. The replacement assumes the
warranty service status of the replaced item.
Your Additional Responsibilities
Before IBM or your reseller exchanges a Machine or part, you agree to remove all
features, parts, options, alterations, and attachments not under warranty service.
You also agree to:
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided:
a. follow the service request procedures that IBM or your reseller provides;
b. backup or secure all programs, data, and funds contained in the Machine;
c. provide IBM or your reseller with sufficient, free, and safe access to your
facilities to permit IBM to fulfill its obligations; and
d. inform IBM or your reseller of changes in the Machine’s location.
4. (a) ensure all information about identified or identifiable individuals (Personal
Data) is deleted from the Machine (to the extent technically possible), (b) allow
E-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
IBM, your reseller or an IBM supplier to process on your behalf any remaining
Personal Data as IBM or your reseller considers necessary to fulfill its
obligations under this Statement of Limited Warranty (which may include
shipping the Machine for such processing to other IBM service locations around
the world), and (c) ensure that such processing complies with any laws
applicable to such Personal Data.
Limitation of Liability
IBM is responsible for loss of, or damage to, your Machine only while it is 1) in
IBM’s possession or 2) in transit in those cases where IBM is responsible for the
transportation charges.
Neither IBM nor your reseller are responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return to
IBM for any reason. You should remove all such information from the Machine
prior to its return.
Circumstances may arise where, because of a default on IBM’s part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other contract or
tort claim), except for any liability that cannot be waived or limited by applicable
laws, IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property and
tangible personal property; and
2. the amount of any other actual direct damages, up to the charges (if recurring,
12 months’ charges apply) for the Machine that is subject of the claim. For
purposes of this item, the term ″Machine″ includes Machine Code and Licensed
Internal Code (″LIC″).
This limit also applies to IBM’s suppliers and your reseller. It is the maximum for
which IBM, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS
LIABLE FOR ANY OF THE FOLLOWING EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS
OF, OR DAMAGE TO, DATA; 3) SPECIAL, INCIDENTAL, OR INDIRECT
DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES; OR 4)
LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED
SAVINGS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU. SOME STATES OR JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
Governing Law
Both you and IBM consent to the application of the laws of the country in which
you acquired the Machine to govern, interpret, and enforce all of your and IBM’s
rights, duties, and obligations arising from, or relating in any manner to, the
subject matter of this Statement of Limited Warranty, without regard to conflict of
law principles.
THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
JURISDICTION TO JURISDICTION.
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Jurisdiction
All of our rights, duties, and obligations are subject to the courts of the country in
which you acquired the Machine.
Part 2 - Country-unique Terms
AMERICAS
ARGENTINA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Ordinary Commercial Court of the city of Buenos Aires.
BOLIVIA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the courts of the city of La Paz.
BRAZIL
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Agreement will be settled exclusively by the court
of Rio de Janeiro, RJ.
CHILE
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Civil Courts of Justice of Santiago.
COLOMBIA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Judges of the Republic of Colombia.
EQUADOR
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Judges of Quito.
MEXICO
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Federal Courts of Mexico City, Federal District.
PARAGUAY
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the courts of the city of Asuncion.
PERU
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Judges and Tribunals of the Judicial District of Lima, Cercado.
Limitation of Liability: The following is added at the end of this section:In accordance
with Article 1328 of the Peruvian Civil Code the limitations and exclusions
specified in this section will not apply to damages caused by IBM’s willful
misconduct (″dolo″) or gross negligence (″culpa inexcusable″).
E-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
URUGUAY
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the City of Montevideo Court’s Jurisdiction.
VENEZUELA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Courts of the Metropolitan Area Of the City of Caracas.
NORTH AMERICA
How to Obtain Warranty Service: The following is added to this Section:
To obtain warranty service from IBM in Canada or the United States, call
1-800-IBM-SERV (426-7378).
CANADA
Limitation of Liability: The following replaces item 1 of this section:
1. damages for bodily injury (including death) or physical harm to real property
and tangible personal property caused by IBM’s negligence; and
Governing Law: The following replaces "laws of the country in which you acquired the
Machine" in the first sentence:
laws in the Province of Ontario.
UNITED STATES
Governing Law: The following replaces "laws of the country in which you acquired the
Machine" in the first sentence:
laws of the State of New York.
ASIA PACIFIC
AUSTRALIA
What this Warranty Covers: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may have
under the Trade Practices Act 1974 or other similar legislation and are only limited
to the extent permitted by the applicable legislation.
Limitation of Liability: The following is added to this Section:
Where IBM is in breach of a condition or warranty implied by the Trade Practices
Act 1974 or other similar legislation, IBM’s liability is limited to the repair or
replacement of the goods or the supply of equivalent goods. Where that condition
or warranty relates to right to sell, quiet possession or clear title, or the goods are
of a kind ordinarily acquired for personal, domestic or household use or
consumption, then none of the limitations in this paragraph apply.
Governing Law: The following replaces "laws of the country in which you acquired the
Machine" in the first sentence:
laws of the State or Territory.
CAMBODIA AND LAOS
Governing Law: The following replaces "laws of the country in which you acquired
the Machine" in the first sentence:
laws of the State of New York, United States of America.
CAMBODIA, INDONESIA, AND LAOS
Arbitration: The following is added under this heading:
Disputes arising out of or in connection with this Statement of Limited Warranty
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
shall be finally settled by arbitration which shall be held in Singapore in
accordance with the Arbitration Rules of Singapore International Arbitration Center
(″SIAC Rules″) then in effect. The arbitration award shall be final and binding for
the parties without appeal and shall be in writing and set forth the findings of fact
and the conclusions of law. The number of arbitrators shall be three, with each side
to the dispute being entitled to appoint one arbitrator. The two arbitrators
appointed by the parties shall appoint a third arbitrator who shall act as chairman
of the proceedings. Vacancies in the post of chairman shall be filled by the
president of the SIAC. Other vacancies shall be filled by the respective nominating
party. Proceedings shall continue from the stage they were at when the vacancy
occurred. If one of the parties refuses or otherwise fails to appoint an arbitrator
within 30 days of the date the other party appoints its, the first appointed
arbitrator shall be the sole arbitrator, provided that the arbitrator was validly and
properly appointed. All proceedings shall be conducted, including all documents
presented in such proceedings, in the English language. The English language
version of this Statement of Limited Warranty prevails over any other language
version.
HONG KONG S.A.R. OF CHINA AND MACAU S.A.R. OF CHINA
Governing Law: The following replaces "laws of the country in which you acquired
the Machine" in the first sentence:
laws of Hong Kong Special Administrative Region of China.
INDIA
Limitation of Liability: The following replaces items 1 and 2 of this Section:
1. liability for bodily injury (including death) or damage to real property and
tangible personal property will be limited to that caused by IBM’s negligence;
and
2. as to any other actual damage arising in any situation involving
nonperformance by IBM pursuant to, or in any way related to the subject of
this Statement of Limited Warranty, the charge paid by you for the individual
Machine that is the subject of the claim. For purposes of this item, the term
"Machine" includes Machine Code and Licensed Internal Code ("LIC").
Arbitration: The following is added under this heading
Disputes arising out of or in connection with this Statement of Limited Warranty
shall be finally settled by arbitration which shall be held in Bangalore, India in
accordance with the laws of India then in effect. The arbitration award shall be
final and binding for the parties without appeal and shall be in writing and set
forth the findings of fact and the conclusions of law. The number of arbitrators
shall be three, with each side to the dispute being entitled to appoint one
arbitrator. The two arbitrators appointed by the parties shall appoint a third
arbitrator who shall act as chairman of the proceedings. Vacancies in the post of
chairman shall be filled by the president of the Bar Council of India. Other
vacancies shall be filled by the respective nominating party. Proceedings shall
continue from the stage they were at when the vacancy occurred. If one of the
parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date
the other party appoints its, the first appointed arbitrator shall be the sole
arbitrator, provided that the arbitrator was validly and properly appointed. All
proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The English language version of this
Statement of Limited Warranty prevails over any other language version.
JAPAN
Governing Law: The following sentence is added to this Section:
E-6 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Any doubts concerning this Statement of Limited Warranty will be initially
resolved between us in good faith and in accordance with the principle of mutual
trust.
MALAYSIA
Limitation of Liability: The word ″SPECIAL″ in item 3 of the fifth paragraph is
deleted.
NEW ZEALAND
What this Warranty Covers: The following paragraph is added to this Section:
The warranties specified in this section are in addition to any rights you may have
under the Consumer Guarantees Act 1993 or other legislation which cannot be
excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect
of any goods which IBM provides, if you require the goods for the purposes of a
business as defined in that Act.
Limitation of Liability: The following is added to this Section:
Where Machines are not acquired for the purposes of a business as defined in the
Consumer Guarantees Act 1993, the limitations in this Section are subject to the
limitations in that Act.
PEOPLE’S REPUBLIC OF CHINA (PRC)
Governing Law: The following replaces ″laws of the country in which you acquired
the Machine″ in the first sentence:
laws of the State of New York, United States of America (except when local law
requires otherwise).
PHILIPPINES
Limitation of Liability: Item 3 in the fifth paragraph is replaced by the following:
SPECIAL (INCLUDING NOMINAL AND EXEMPLARY DAMAGES), MORAL,
INCIDENTAL, OR INDIRECT DAMAGES FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES; OR
Arbitration: The following is added: under this heading
Disputes arising out of or in connection with this Statement of Limited Warranty
shall be finally settled by arbitration which shall be held in Metro Manila,
Philippines in accordance with the laws of the Philippines then in effect. The
arbitration award shall be final and binding for the parties without appeal and
shall be in writing and set forth the findings of fact and the conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being
entitled to appoint one arbitrator. The two arbitrators appointed by the parties
shall appoint a third arbitrator who shall act as chairman of the proceedings.
Vacancies in the post of chairman shall be filled by the president of the Philippine
Dispute Resolution Center, Inc.. Other vacancies shall be filled by the respective
nominating party. Proceedings shall continue from the stage they were at when the
vacancy occurred. If one of the parties refuses or otherwise fails to appoint an
arbitrator within 30 days of the date the other party appoints its, the first
appointed arbitrator shall be the sole arbitrator, provided that the arbitrator was
validly and properly appointed. All proceedings shall be conducted, including all
documents presented in such proceedings, in the English language. The English
language version of this Statement of Limited Warranty prevails over any other
language version.
SINGAPORE
Limitation of Liability: The words ″SPECIAL″ and ″ECONOMIC″ in item 3 in the
fifth paragraph are deleted.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES:
The terms of this Statement of Limited Warranty apply to Machines purchased
from IBM or an IBM reseller.
How to Obtain Warranty Service:
Add the following paragraph in Western Europe (Andorra, Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Netherlands,
Norway, Poland, Portugal, San Marino, Slovakia, Slovenia, Spain, Sweden, Switzerland,
United Kingdom, Vatican State, and any country subsequently added to the European
Union, as from the date of accession): The warranty for Machines acquired in Western
Europe shall be valid and applicable in all Western Europe countries provided the
Machines have been announced and made available in such countries. If you
purchase a Machine in one of the Western European countries, as defined above,
you may obtain warranty service for that Machine in any of those countries from
either (1) an IBM reseller approved to perform warranty service or (2) from IBM,
provided the Machine has been announced and made available by IBM in the
country in which you wish to obtain service. If you purchased a Personal
Computer Machine in Albania, Armenia, Belarus, Bosnia and Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan, Kyrgyzstan,
Federal Republic of Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM),
Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you
may obtain warranty service for that Machine in any of those countries from either
(1) an IBM reseller approved to perform warranty service or (2) from IBM. If you
purchase a Machine in a Middle Eastern or African country, you may obtain
warranty service for that Machine from the IBM entity within the country of
purchase, if that IBM entity provides warranty service in that country, or from an
IBM reseller, approved by IBM to perform warranty service on that Machine in
that country. Warranty service in Africa is available within 50 kilometers of an IBM
approved service provider. You are responsible for transportation costs for
Machines located outside 50 kilometers of an IBM approved service provider.
Governing Law:
The phrase "the laws of the country in which you acquired the Machine" is replaced
by:
1) ″the laws of Austria″ in Albania, Armenia, Azerbaijan, Belarus,
Bosnia-Herzegovina, Bulgaria, Croatia, Georgia, Hungary, Kazakhstan,
Kyrgyzstan, FYR Macedonia, Moldova, Poland, Romania, Russia, Slovakia,
Slovenia, Tajikistan, Turkmenistan, Ukraine, Uzbekistan, and FR Yugoslavia; 2)
″the laws of France″ in Algeria, Benin, Burkina Faso, Cameroon, Cape Verde,
Central African Republic, Chad, Comoros, Congo Republic, Djibouti, Democratic
Republic of Congo, Equatorial Guinea, French Guiana, French Polynesia, Gabon,
Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Madagascar, Mali,
Mauritania, Mauritius, Mayotte, Morocco, New Caledonia, Niger, Reunion,
Senegal, Seychelles, Togo, Tunisia, Vanuatu, and Wallis & Futuna; 3) ″the laws of
Finland″ in Estonia, Latvia, and Lithuania; 4) ″the laws of England″ in Angola,
Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya,
Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar,
Rwanda, Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda,
United Arab Emirates, the United Kingdom, West Bank/Gaza, Yemen, Zambia,
and Zimbabwe; and 5) ″the laws of South Africa″ in South Africa, Namibia,
Lesotho and Swaziland.
Jurisdiction: The following exceptions are added to this section:
1) In Austria the choice of jurisdiction for all disputes arising out of this Statement
of Limited Warranty and relating thereto, including its existence, will be the
E-8 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
competent court of law in Vienna, Austria (Inner-City); 2) in Angola, Bahrain,
Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya, Kuwait,
Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda,
Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab
Emirates, West Bank/Gaza, Yemen, Zambia, and Zimbabwe all disputes arising
out of this Statement of Limited Warranty or related to its execution, including
summary proceedings, will be submitted to the exclusive jurisdiction of the English
courts; 3) in Belgium and Luxembourg, all disputes arising out of this Statement
of Limited Warranty or related to its interpretation or its execution, the law, and
the courts of the capital city, of the country of your registered office and/or
commercial site location only are competent; 4) in France, Algeria, Benin, Burkina
Faso, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo
Republic, Djibouti, Democratic Republic of Congo, Equatorial Guinea, French
Guiana, French Polynesia, Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast,
Lebanon, Madagascar, Mali, Mauritania, Mauritius, Mayotte, Morocco, New
Caledonia, Niger, Reunion, Senegal, Seychelles, Togo, Tunisia, Vanuatu, and
Wallis & Futuna all disputes arising out of this Statement of Limited Warranty or
related to its violation or execution, including summary proceedings, will be
settled exclusively by the Commercial Court of Paris; 5) in Russia, all disputes
arising out of or in relation to the interpretation, the violation, the termination, the
nullity of the execution of this Statement of Limited Warranty shall be settled by
Arbitration Court of Moscow; 6) in South Africa, Namibia, Lesotho and
Swaziland, both of us agree to submit all disputes relating to this Statement of
Limited Warranty to the jurisdiction of the High Court in Johannesburg; 7) in
Turkey all disputes arising out of or in connection with this Statement of Limited
Warranty shall be resolved by the Istanbul Central (Sultanahmet) Courts and
Execution Directorates of Istanbul, the Republic of Turkey; 8) in each of the
following specified countries, any legal claim arising out of this Statement of
Limited Warranty will be brought before, and settled exclusively by, the competent
court of a) Athens for Greece, b) Tel Aviv-Jaffa for Israel, c) Milan for Italy, d)
Lisbon for Portugal, and e) Madrid for Spain; and 9) in the United Kingdom, both
of us agree to submit all disputes relating to this Statement of Limited Warranty to
the jurisdiction of the English courts.
Arbitration: The following is added under this heading:
In Albania, Armenia, Azerbaijan, Belarus, Bosnia-Herzegovina, Bulgaria, Croatia,
Georgia, Hungary, Kazakhstan, Kyrgyzstan, FYR Macedonia, Moldova, Poland,
Romania, Russia, Slovakia, Slovenia, Tajikistan, Turkmenistan, Ukraine,
Uzbekistan, and FR Yugoslavia all disputes arising out of this Statement of
Limited Warranty or related to its violation, termination or nullity will be finally
settled under the Rules of Arbitration and Conciliation of the International Arbitral
Center of the Federal Economic Chamber in Vienna (Vienna Rules) by three
arbitrators appointed in accordance with these rules. The arbitration will be held in
Vienna, Austria, and the official language of the proceedings will be English. The
decision of the arbitrators will be final and binding upon both parties. Therefore,
pursuant to paragraph 598 (2) of the Austrian Code of Civil Procedure, the parties
expressly waive the application of paragraph 595 (1) figure 7 of the Code. IBM
may, however, institute proceedings in a competent court in the country of
installation.In Estonia, Latvia and Lithuania all disputes arising in connection with
this Statement of Limited Warranty will be finally settled in arbitration that will be
held in Helsinki, Finland in accordance with the arbitration laws of Finland then in
effect. Each party will appoint one arbitrator. The arbitrators will then jointly
appoint the chairman. If arbitrators cannot agree on the chairman, then the Central
Chamber of Commerce in Helsinki will appoint the chairman.
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROPEAN UNION (EU)
THE FOLLOWING TERMS APPLY TO ALL EU COUNTRIES:
The warranty for Machines acquired in EU countries is valid and applicable in all
EU countries provided the Machines have been announced and made available in
such countries.
How to Obtain Warranty Service: The following is added to this section:
To obtain warranty service from IBM in EU countries, see the telephone listing in
Part 3 - Warranty Information.
You may contact IBM at the following address:
IBM Warranty & Service Quality Dept.
PO Box 30
Spango Valley
Greenock
Scotland PA16 0AH
CONSUMERS
Consumers have legal rights under applicable national legislation governing the
sale of consumer goods. Such rights are not affected by the warranties provided in
this Statement of Limited Warranty.
AUSTRIA, DENMARK, FINLAND, GREECE, ITALY, NETHERLANDS,
NORWAY, PORTUGAL, SPAIN, SWEDEN AND SWITZERLAND
Limitation of Liability: The following replaces the terms of this section in its entirety:
Except as otherwise provided by mandatory law:
1. IBM’s liability for any damages and losses that may arise as a consequence of
the fulfillment of its obligations under or in connection with this Statement of
Limited Warranty or due to any other cause related to this Statement of
Limited Warranty is limited to the compensation of only those damages and
losses proved and actually arising as an immediate and direct consequence of
the non-fulfillment of such obligations (if IBM is at fault) or of such cause, for a
maximum amount equal to the charges you paid for the Machine. For purposes
of this item, the term ″Machine″ includes Machine Code and Licensed Internal
Code (″LIC″).
The above limitation shall not apply to damages for bodily injuries (including
death) and damages to real property and tangible personal property for which
IBM is legally liable.
2. UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS
LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR
INDIRECT DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL
DAMAGES; 3) LOST PROFITS, EVEN IF THEY ARISE AS AN IMMEDIATE
CONSEQUENCE OF THE EVENT THAT GENERATED THE DAMAGES;
OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR ANTICIPATED
SAVINGS.
FRANCE AND BELGIUM
Limitation of Liability: The following replaces the terms of this section in its entirety:
Except as otherwise provided by mandatory law:
1. IBM’s liability for any damages and losses that may arise as a consequence of
the fulfillment of its obligations under or in connection with this Statement of
Limited Warranty is limited to the compensation of only those damages and
losses proved and actually arising as an immediate and direct consequence of
the non-fulfillment of such obligations (if IBM is at fault), for a maximum
amount equal to the charges you paid for the Machine that has caused the
damages. For purposes of this item, the term ″Machine″ includes Machine Code
E-10 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
and Licensed Internal Code (″LIC″).
The above limitation shall not apply to damages for bodily injuries (including
death) and damages to real property and tangible personal property for which
IBM is legally liable.
2. UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS
LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR
INDIRECT DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL
DAMAGES; 3) LOST PROFITS, EVEN IF THEY ARISE AS AN IMMEDIATE
CONSEQUENCE OF THE EVENT THAT GENERATED THE DAMAGES;
OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR ANTICIPATED
SAVINGS.
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:
AUSTRIA
The provisions of this Statement of Limited Warranty replace any applicable
statutory warranties.
What this Warranty Covers: The following replaces the first sentence of the first
paragraph of this section:
The warranty for an IBM Machine covers the functionality of the Machine for its
normal use and the Machine’s conformity to its Specifications.
The following paragraphs are added to this section:
The limitation period for consumers in action for breach of warranty is the
statutory period as a minimum. In case IBM or your reseller is unable to repair an
IBM Machine, you can alternatively ask for a partial refund as far as justified by
the reduced value of the unrepaired Machine or ask for a cancellation of the
respective agreement for such Machine and get your money refunded.
The second paragraph does not apply.
What IBM Will Do to Correct Problems: The following is added to this section:
During the warranty period, IBM will reimburse you for the transportation charges
for the delivery of the failing Machine to IBM.
Limitation of Liability: The following paragraph is added to this section:
The limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2:
IBM’s liability under this item is limited to the violation of essential contractual
terms in cases of ordinary negligence.
EGYPT
Limitation of Liability: The following replaces item 2 in this section:
as to any other actual direct damages, IBM’s liability will be limited to the total
amount you paid for the Machine that is the subject of the claim. For purposes of
this item, the term ″Machine″ includes Machine Code and Licensed Internal Code
(″LIC″).
Applicability of suppliers and resellers (unchanged).
FRANCE
Limitation of Liability: The following replaces the second sentence of the first paragraph
of this section:
In such instances, regardless of the basis on which you are entitled to claim
damages from IBM, IBM is liable for no more than: (items 1 and 2 unchanged).
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
GERMANY
What this Warranty Covers: The following replaces the first sentence of the first
paragraph of this section:
The warranty for an IBM Machine covers the functionality of the Machine for its
normal use and the Machine’s conformity to its Specifications.
The following paragraphs are added to this section:
The minimum warranty period for Machines is twelve months. In case IBM or
your reseller is unable to repair an IBM Machine, you can alternatively ask for a
partial refund as far as justified by the reduced value of the unrepaired Machine or
ask for a cancellation of the respective agreement for such Machine and get your
money refunded.
The second paragraph does not apply.
What IBM Will Do to Correct Problems: The following is added to this section:
During the warranty period, transportation for delivery of the failing Machine to
IBM will be at IBM’s expense.
Limitation of Liability: The following paragraph is added to this section:
The limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2:
IBM’s liability under this item is limited to the violation of essential contractual
terms in cases of ordinary negligence.
HUNGARY
Limitation of Liability: The following is added at the end of this section:
The limitation and exclusion specified herein shall not apply to liability for a
breach of contract damaging life, physical well-being, or health that has been
caused intentionally, by gross negligence, or by a criminal act. The parties accept
the limitations of liability as valid provisions and state that the Section 314.(2) of
the Hungarian Civil Code applies as the acquisition price as well as other
advantages arising out of the present Statement of Limited Warranty balance this
limitation of liability.
IRELAND
What this Warranty Covers: The following is added to this section:
Except as expressly provided in these terms and conditions, all statutory
conditions, including all warranties implied, but without prejudice to the generality
of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
Limitation of Liability: The following replaces the terms of section in its entirety:
For the purposes of this section, a ″Default″ means any act, statement, omission, or
negligence on the part of IBM in connection with, or in relation to, the subject
matter of this Statement of Limited Warranty in respect of which IBM is legally
liable to you, whether in contract or tort. A number of Defaults which together
result in, or contribute to, substantially the same loss or damage will be treated as
one Default occurring on the date of occurrence of the last such Default.
Circumstances may arise where, because of a Default, you are entitled to recover
damages from IBM. This section sets out the extent of IBM’s liability and your sole
remedy.
1. IBM will accept unlimited liability for death or personal injury caused by the
negligence of IBM
2. Subject always to the Items for Which IBM is Not Liable below, IBM will
accept unlimited liability for physical damage to your tangible property
resulting from the negligence of IBM.
E-12 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Except as provided in items 1 and 2 above, IBM’s entire liability for actual
damages for any one Default will not in any event exceed the greater of 1) EUR
125,000, or 2) 125% of the amount you paid for the Machine directly relating to
the Default.
Items for Which IBM is Not Liable
Save with respect to any liability referred to in item 1 above, under no
circumstances is IBM, its suppliers or resellers liable for any of the following, even
if IBM or they were informed of the possibility of such losses:
1. loss of, or damage to, data;
2. special, indirect, or consequential loss; or
3. loss of profits, business, revenue, goodwill, or anticipated savings.
SLOVAKIA
Limitation of Liability: The following is added to the end of the last paragraph:
The limitations apply to the extent they are not prohibited under §§ 373-386 of the
Slovak Commercial Code.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND
Limitation of Liability: The following is added to this section:
IBM’s entire liability to you for actual damages arising in all situations involving
nonperformance by IBM in respect of the subject matter of this Statement of
Warranty will be limited to the charge paid by you for the individual Machine that
is the subject of your claim from IBM.
UNITED KINGDOM
Limitation of Liability: The following replaces the terms of this section is in its entirety:
For the purposes of this section, a ″Default″ means any act, statement, omission, or
negligence on the part of IBM in connection with, or in relation to, the subject
matter of this Statement of Limited Warranty in respect of which IBM is legally
liable to you, whether in contract or tort. A number of Defaults which together
result in, or contribute to, substantially the same loss or damage will be treated as
one Default. Circumstances may arise where, because of a Default, you are entitled
to recover damages from IBM. This section sets out the extent of IBM’s liability
and your sole remedy.
1. IBM will accept unlimited liability for:
a. death or personal injury caused by the negligence of IBM; and
b. any breach of its obligations implied by Section 12 of the Sale of Goods Act
1979 or Section 2 of the Supply of Goods and Services Act 1982, or any
statutory modification or re-enactment of either such Section.
2. IBM will accept unlimited liability, subject always to the Items for Which IBM
is Not Liable below, for physical damage to your tangible property resulting
from the negligence of IBM.
3. IBM’s entire liability for actual damages for any one Default will not in any
event, except as provided in items 1 and 2 above, exceed the greater of 1)
Pounds Sterling 75,000, or 2) 125% of the total purchase price payable or the
charges for the Machine directly relating to the Default.
These limits also apply to IBM’s suppliers and resellers. They state the maximum
for which IBM and such suppliers and resellers are collectively responsible.
Items for Which IBM is Not Liable
Save with respect to any liability referred to in item 1 above, under no
circumstances is IBM or any of its suppliers or resellers liable for any of the
following, even if IBM or they were informed of the possibility of such losses:
1. loss of, or damage to, data;
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. special, indirect, or consequential loss; or
3. loss of profits, business, revenue, goodwill, or anticipated savings.
Part 3 - Warranty Information
This Part 3 provides information regarding the warranty applicable to your
Machine, including the warranty period and type of warranty service IBM
provides.
Warranty Period
The warranty period may vary by country or region and is specified in the table
below. NOTE: ″Region″ means either Hong Kong or Macau Special Administrative
Region of China.
C400 PROJECTOR
Country or Region of
Purchase
Warranty Period
Type of Warranty Service
Worldwide
3 years
7
C400 PROJECTOR LAMP
Country or Region of
Purchase
Warranty Period
Type of Warranty Service
Worldwide
3 months
7
A warranty period of 3 years on parts and 3 years on labor means that IBM
provides warranty service without charge for parts and labor during the 3 year
warranty period.
A warranty period of 3 months on parts and 3 months on labor means that IBM
provides warranty service without charge for parts and labor during the 3 month
warranty period.
Types of Warranty Service
If required, IBM provides repair or exchange service depending on the type of
warranty service specified for your Machine in the above table and as described
below. Warranty service may be provided by your reseller if approved by IBM to
perform warranty service. Scheduling of service will depend upon the time of your
call and is subject to parts availability. Service levels are response time objectives
and are not guaranteed. The specified level of warranty service may not be
available in all worldwide locations, additional charges may apply outside IBM’s
normal service area, contact your local IBM representative or your reseller for
country and location specific information.
1. Customer Replaceable Unit (″CRU″) Service
IBM provides replacement CRUs to you for you to install. CRU information
and replacement instructions are shipped with your Machine and are available
from IBM at any time on your request. Installation of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation. You may install a Tier 2 CRU yourself or request IBM to
install it, at no additional charge, under the type of warranty service designated
for your Machine. IBM specifies in the materials shipped with a replacement
E-14 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CRU whether a defective CRU must be returned to IBM. When return is
required, 1) return instructions and a container are shipped with the
replacement CRU, and 2) you may be charged for the replacement CRU if IBM
does not receive the defective CRU within 30 days of your receipt of the
replacement.
2. On-site Service
IBM or your reseller will either repair or exchange the failing Machine at your
location and verify its operation. You must provide suitable working area to
allow disassembly and reassembly of the IBM Machine. The area must be clean,
well lit and suitable for the purpose. For some Machines, certain repairs may
require sending the Machine to an IBM service center.
3. Courier or Depot Service *
You will disconnect the failing Machine for collection arranged by IBM. IBM
will provide you with a shipping container for you to return your Machine to a
designated service center. A courier will pick up your Machine and deliver it to
the designated service center. Following its repair or exchange, IBM will
arrange the return delivery of the Machine to your location. You are responsible
for its installation and verification.
4. Customer Carry-In or Mail-In Service
You will deliver or mail as IBM specifies (prepaid unless IBM specifies
otherwise) the failing Machine suitably packaged to a location IBM designates.
After IBM has repaired or exchanged the Machine, IBM will make it available
for your collection or, for Mail-in Service, IBM will return it to you at IBM’s
expense, unless IBM specifies otherwise. You are responsible for the subsequent
installation and verification of the Machine.
5. CRU and On-site Service
This type of Warranty Service is a combination of Type 1 and Type 2 (see
above).
6. CRU and Courier or Depot Service
This type of Warranty Service is a combination of Type 1 and Type 3 (see
above).
7. CRU and Customer Carry-In or Mail-In Service
This type of Warranty Service is a combination of Type 1 and Type 4 (see
above).
When a 5, 6 or 7 type of warranty service is listed, IBM will determine which
type of warranty service is appropriate for the repair.
* This type of service is called ThinkPad EasyServ or EasyServ in some countries.
The IBM Machine Warranty worldwide web site at
worldwide overview of IBM’s Limited Warranty for Machines, a Glossary of IBM
definitions, Frequently Asked Questions (FAQs) and Support by Product (Machine)
with links to Product Support pages. The IBM Statement of Limited Warranty is
also available on this site in 29 languages.
To obtain warranty service contact IBM or your IBM reseller. In Canada or the
United States, call 1-800-IBM-SERV (426-7378). In Canada or the United States, call
1-800-IBM-SERV (426-7378). For other countries, see the telephone numbers below.
Phone numbers are subject to change without notice. For the latest phone number
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
Country or Region
Telephone Number
Africa
+44 (0) 1475 555 055 Japan
Desktop:
0120-887-870
v Overseas calls:
81-46-266-1084
ThinkPad:
0120-887-874
v Overseas calls:
81-46-266-1084
IntelliStation and
xSeries:
81-46-266-1358
PC Software:
0120-558-695
v Overseas calls:
81-44-200-8666
Argentina
Australia
Austria
0800-666-0011
131-426
Luxembourg
298-977-5063
Malaysia
(60) 3-7727-7800
001-866-434-2080
+44 (0) 1475 555 055
020-514 5770
01-24592-5901
0800-0189
Mexico
Bolivia
Middle East
Netherlands
Belgium
Dutch: 02-210 9820
French: 02-210 9800
55-11-3889-8986
Brazil
New Zealand
Nicaragua
0800-446-149
255-6658
Canada
English:
1-800-565-3344
French:
1-800-565-3344
In Toronto:
416-383-3344
Chile
800-224-488
800-810-1818
Norway
Panama
Peru
66 81 11 00
206-6047
China
China (Hong Kong
and S.A.R.)
Home PC:
852-2825-7799
0-800-50-866
Commercial PC:
852-8205-0333
Colombia
Costa Rica
Denmark
980-912-3021
284-3911
Philippines
Portugal
Russia
(63) 2-995-2225
21-892-7147
45 20 82 00
095-940-2000
Dominican Republic 566-4755
or 566-5161 ext. 8201
Singapore
(65) 1-800-840-9911
Toll Free within the
Dominican Republic:
1-200-1929
Ecuador
1-800-426911 (option Spain
#4)
91-714-7983
E-16 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
El Salvador
Finland
Telephone Number
250-5696
Country or Region
Sweden
Telephone Number
08-477 4420
09-459 69 60
02 38 55 74 50
07032-1549 201
335-8490
Switzerland
Taiwan
058-333-0900
France
886-2-8723-9799
(66) 2-273-4000
00-800-446-32-041
0-1475-555 055
Germany
Thailand
Guatemala
Honduras
Turkey
Tegucigalpa & Sand
Pedro Sula: 232-4222
United Kingdom
San Pedro Sula:
552-2234
India
1600-44-6666
United States
1-800-IBM-SERV
(1-800-426-7378)
000-411-005-6649
0-800-100-2011
Indonesia
Ireland
Italy
(62) 21-523-8535
01-815-9202
Uruguay
Venezuela
Vietnam
01-815-9202
Ho Chi Minh: (84)
8-829-5160
Hanoi: (84)
4-843-6675
Appendix E. IBM Statement of Limited Warranty Z125-4753-08 04/2004 E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
E-18 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix F. Guarantee supplement for Mexico
This supplement is considered part of IBM’s Statement of Limited Warranty and
shall be effective solely and exclusively for products distributed and
commercialized within Territory of the Mexican United States. In the event of a
conflict, the terms of this supplement shall apply.
All software programs pre-loaded in the equipment shall only have a thirty- (30)
day guarantee for installation defects from the date of purchase. IBM is not
responsible for the information in such software programs and/or any additional
software programs installed by you or installed after purchase of the product.
Services not chargeable to the guarantee shall be charged to the final user, prior an
authorization.
In the event that warranty repair is required please call the IBM Support Center at
001-866-434-2080, where you will be directed to the nearest Authorized Service
Center. Should no Authorized Service Center exist in your city, location or within
70 kilometers of your city or location, the guarantee includes any reasonable
delivery charges related to the transportation of the product to our nearest
Authorized Service Center. Please call the nearest Authorized Service Center to
obtain the necessary approvals or information concerning the shipment of the
product and the shipment address.
To obtain a list of Authorized Service Centers, please visit:
servicio_mexico.html
Manufactured by:
SCI Systems de México, S.A. de C.V.
Av. De la Solidaridad Iberoamericana No. 7020
Col. Club de Golf Atlas
El Salto, Jalisco, México
C.P. 45680,
Tel. 01-800-3676900
Marketing by:
IBM de México, Comercialización y
Servicios, S. A. de C. V.
Alfonso Nápoles Gándara No 3111
Parque Corporativo de Peña Blanca
Delegación Álvaro Obregón
México, D.F., México
C.P. 01210,
Tel. 01-800-00-325-00
© Copyright IBM Corp. 2004
F-1
Download from Www.Somanuals.com. All Manuals Search And Download.
F-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix G. Notices
IBM may not offer the products, services, or features discussed in this document in
all countries. Consult your local IBM representative for information on the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may
be used instead. However, it is the user’s responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement may
not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation
or other life support applications where malfunction may result in injury or death
to persons. The information contained in this document does not affect or change
IBM product specifications or warranties. Nothing in this document shall operate
as an express or implied license or indemnity under the intellectual property rights
of IBM or third parties. All information contained in this document was obtained
in specific environments and is presented as an illustration. The result obtained in
other operating environments may vary.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this IBM
product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments may
© Copyright IBM Corp. 2004
G-1
Download from Www.Somanuals.com. All Manuals Search And Download.
vary significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Trademarks
The following terms are trademarks of International Business Machines
Corporation in the United States, other countries, or both:
IBM
IBM logo
ThinkPad
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
Electronic emission notices
IBM C400 PROJECTOR
Federal Communications Commission (FCC) statement
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
v Reorient or relocate the receiving antenna.
v Increase the separation between the equipment and receiver.
v Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
v Consult an IBM authorized dealer or service representative for help.
Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. Proper cables and connectors are available from IBM
authorized dealers. IBM is not responsible for any radio or television interference
caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Responsible party:
G-2 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
International Business Machines Corporation
New Orchard Road
Armonk, NY 10504
Telephone: 1-919-543-2193
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformite a la reglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)
Zulassungbescheinigunglaut dem Deutschen Gesetz über die elektromagnetische
Verträglichkeit von Geräten (EMVG) vom 30. August 1995 (bzw. der EMC EG
Richtlinie 89/336):
Dieses Gerät ist berechtigt in Übereinstimmungmit dem Deutschen EMVG das
EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die
Konformitätserklärung nach Paragraph 5 des EMVG ist die:
IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart.
Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2:
Das Gerät erfüllt die Schutzanforderungen nach EN 55024:1998 und EN 55022:1998 Klasse
B.
EN 55022 Hinweis:
“Wird dieses Gerät in einer industriellen Umgebung betrieben (wie in EN 55022:B
festgetlegt), dann kann es dabei eventuell gestört werden. In solch einem FA11 ist
der Abstand bzw. die Abschirmungzu der industriellen Störquelle zu vergröβern.”
Anmerkung:
Um die Einhaltung des EMVG sicherzustellen sind die Geräte, wie in den IBM
Handbüchern angegeben, zu installieren und zu betreiben.
European Union - emission directive
This product is in conformity with the protection requirements of EU Council
Directive 89/336/ECC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
Appendix G. Notices G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
IBM can not accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product,
including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022. The
limits for Class B equipment were derived for typical residential environments to
provide reasonable protection against interference with licensed communication
devices.
Union Européenne - Directive Conformité électromagnétique
Ce produit est conforme aux exigences de protection de la Directive 89/336/EEC
du Conseil de l’UE sur le rapprochement des lois des États membres en matière de
compatibilité électromagnétique.
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences de
protection résultant d’une modification non recommandée du produit, y compris
l’installation de cartes autres que les cartes IBM.
Ce produit a été testé et il satisfait les conditions de l’équipement informatique de
Classe B en vertu de Standard européen EN 55022. Les conditions pour
l’équipement de Classe B ont été définies en fonction d’un contexte résidentiel
ordinaire afin de fournir une protection raisonnable contre l’interférence
d’appareils de communication autorisés.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Este producto satisface los requisitos de protección del Consejo de la UE, Directiva
89/336/CEE en lo que a la legislatura de los Estados Miembros sobre
compatibilidad electromagnética se refiere.
IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer
dichos requisitos de protección como resultado de una modificación no
recomendada del producto, incluyendo el ajuste de tarjetas de opción que no sean
IBM.
Este producto ha sido probado y satisface los límites para Equipos Informáticos
Clase B de conformidad con el Estándar Europeo EN 55022. Los límites para los
equipos de Clase B se han establecido para entornos residenciales típicos a fin de
proporcionar una protección razonable contra las interferencias con dispositivos de
comunicación licenciados.
Union Europea - Normativa EMC
Questo prodotto è conforme alle normative di protezione ai sensi della Direttiva
del Consiglio dell’Unione Europea 89/336/CEE sull’armonizzazione legislativa
degli stati membri in materia di compatibilità elettromagnetica.
IBM non accetta responsabilità alcuna per la mancata conformità alle normative di
protezione dovuta a modifiche non consigliate al prodotto, compresa l’installazione
di schede e componenti di marca diversa da IBM.
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti
stabiliti per le le apparecchiature di informatica Classe B ai sensi del Norma
Europea EN 55022. I limiti delle apparecchiature della Classe B sono stati stabiliti
G-4 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
al fine di fornire ragionevole protezione da interferenze mediante dispositivi di
comunicazione in concessione in ambienti residenziali tipici.
Japanese statement of compliance for products less than or equal to 20 A per
phase
Appendix G. Notices G-5
Download from Www.Somanuals.com. All Manuals Search And Download.
G-6 IBM C400 PROJECTOR: User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁꢂꢃ
Part Number: 73P3195
Printed in USA
(1P) P/N: 73P3195
Download from Www.Somanuals.com. All Manuals Search And Download.
|