| 	
		 ꢀꢁꢂ   
					IBM High Rate   
					Wireless LAN   
					Mini-PCI Adapter   
					User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Safety: Read first   
					Before installing this product, read the Safety Information.   
					Antes de instalar este produto, leia as Informações de Segurança.   
					Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.   
					Læs sikkerhedsforskrifterne, før du installerer dette produkt.   
					Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety   
					Information.   
					Avant d’installer ce produit, lisez les consignes de sécurité.   
					Vor der Installation dieses Produkts die Sicherheitshinweise lesen.   
					Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.   
					Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.   
					Les sikkerhetsinformasjonen (Safety Information) før du installerer dette   
					produktet.   
					© Copyright IBM Corp. 2002   
					iii   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
				Antes de instalar este produto, leia as Informações sobre Segurança.   
					Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.   
					Antes de instalar este producto lea la información de seguridad.   
					Läs säkerhetsinformationen innan du installerar den här produkten.   
					iv IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Contents   
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					
					© Copyright IBM Corp. 2002   
					v 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				vi IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				About the IBM® High Rate Wireless LAN Mini-PCI   
					Adapter   
					This section provides information on registering, installing, and using the IBM   
					High Rate Wireless LAN Mini-PCI Adapter.   
					Product registration   
					Thank you for purchasing this IBM product. Please take a few moments to   
					register your product and provide us with information that will help IBM to   
					serve you better in the future. Your feedback is valuable to us in developing   
					products and services that are important to you, as well as in developing better   
					ways to communicate with you. Register your option on the IBM Web site at:   
					www.ibm.com/pc/register   
					IBM will send you information and updates on your registered product unless   
					you indicate on the Web site questionnaire that you do not want to receive   
					further information.   
					Product description   
					If you are using a wireless upgradable model of an IBM ThinkPad® R32 Series   
					computer, X30 Series computer, or T30 Series computer, you can install the IBM   
					High Rate Wireless LAN Mini-PCI Adapter (hereafter called the Mini-PCI   
					Card) in a Mini-PCI Card slot on your computer.   
					The option kit includes:   
					v Mini-PCI Card   
					v Mini-PCI guide   
					v CD-ROM (device drivers and User’s Guide)   
					v Product warranty and notices for IBM High Rate Wireless LAN Mini-PCI   
					Adapter   
					© Copyright IBM Corp. 2002   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					1-1   
					 
				Installing the Mini-PCI Card   
					Note: Use only the Mini-PCI Card provided by IBM.   
					If your computer is a wireless upgradable model, and you are installing the   
					Mini-PCI Card for the first time, follow the procedure below.   
					For ThinkPad R32 Series computer   
					If you are using ThinkPad R32 Series computer, do as follows:   
					1. Turn off the computer; then disconnect the ac adapter and all cables from   
					the computer.   
					2. Close the computer display, and turn the computer over.   
					3. Remove the battery. (For information on removing the battery, refer to the   
					ThinkPad R32 Series Service and Troubleshooting Guide.)   
					4. Loosen the screw on the cover of the Mini-PCI Card slot ꢀ1ꢁ; then remove   
					the cover ꢀ2ꢁ.   
					1-2 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
				5. Take the cables out of the cable holder as shown.   
					Note: If a Mini-PCI Card has been installed in your computer, and you   
					remove the Card and do not install a new one, put the cables in the   
					cable holder after disconnecting them from the Card.   
					6. Align the contact edge of the Mini-PCI Card with the corresponding   
					socket contact of the computer ꢀ1ꢁ. Connect the cables to the new   
					Mini-PCI Card ꢀ2ꢁ.   
					About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-3   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				7. Pivot the card until you can snap it into place by pressing the upper side   
					of the connectors as shown.   
					Make sure that the card is firmly fixed in the slot and does not move   
					easily.   
					8. Align the tabs of the Mini-PCI Card slot cover with the corresponding   
					slots; then press the cover flat.   
					9. Tighten the screw of the cover.   
					Attention: After you install a Mini-PCI Card, do not use your computer   
					until you have closed the cover. Never use the computer with the cover   
					open.   
					10. Reinstall the battery. (For information on reinstalling the battery, refer to   
					the ThinkPad R32 Series Service and Troubleshooting Guide.)   
					11. Turn the computer over again. Connect the ac adapter and cables to the   
					computer; then turn it on.   
					For ThinkPad X30 Series computer   
					If you are using ThinkPad X30 Series computer, do as follows:   
					1. Turn off the computer. Then disconnect the ac adapter and all cables from   
					the computer.   
					2. Remove the battery and the keyboard. (For information on removing the   
					battery and the keyboard, refer to the ThinkPad X30 Series Service and   
					Troubleshooting Guide.)   
					1-4 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				3. Take the cables out of a cable holder.   
					Note: If a Mini-PCI Card has been installed in your computer, and you   
					remove the Card and do not install a new one, put the cables in the   
					cable holder after disconnecting them from the Card.   
					4. Connect the cables to the new Mini-PCI Card.   
					Note: Plug the gray cable with the tab marked MAIN into jack J1, and the   
					black cable with the tab marked AUX into jack J2.   
					About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-5   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				5. Align the contact edge of the Mini-PCI Card with the corresponding socket   
					contact of the computer.   
					6. Pivot the Card until you can snap it into place by pressing the upper side   
					of the connectors. Make sure that the card is firmly fixed in the slot and   
					does not move easily.   
					When attaching the Card, route the antenna cables to go under the cable   
					guide as in ꢀaꢁ, and place the tabs as indicated by arrow ꢀbꢁ as in this   
					figure.   
					a 
					b 
					1-6 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				7. Attach the Mini-PCI guide that comes with the option package.   
					8. Reinstall the battery and the keyboard. (For information on reinstalling the   
					battery and the keyboard, refer to the ThinkPad X30 Series Service and   
					Troubleshooting Guide.)   
					For ThinkPad T30 Series computer   
					If you are using ThinkPad T30 Series computer, do as follows:   
					1. Turn off the computer; then disconnect the ac adapter and all cables from   
					the computer.   
					2. Close the computer display, and turn the computer over.   
					3. Remove the battery. (For information on removing the battery, refer to the   
					ThinkPad T30 Series Service and Troubleshooting Guide.)   
					About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-7   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				4. Loosen the screws on the cover of the Mini-PCI Card slot ꢀ1ꢁ; then   
					remove the cover ꢀ2ꢁ.   
					5. Open the insulation sheet ꢀ1ꢁ, and take the cables out of the cable holder   
					ꢀ2ꢁ.   
					Note: If a Mini-PCI Card has been installed in your computer, and you   
					remove the Card and do not install a new one, put the cables in the   
					cable holder after disconnecting them from the Card.   
					1-8 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				6. Align the contact edge of the Mini-PCI Card with the corresponding   
					socket contact of the computer ꢀ1ꢁ. Connect the cables to the Mini-PCI   
					Card ꢀ2ꢁ.   
					7. Pivot the card until you can snap it into place by pressing the upper side   
					of the connectors as shown.   
					Make sure that the card is firmly fixed in the slot and does not move   
					easily.   
					About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-9   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				8. Cover the Mini-PCI Card with the insulation sheet ꢀ1ꢁ, and attach the   
					Mini-PCI guide ꢀ2ꢁ that comes with the option package.   
					9. Align the tabs of the Mini-PCI Card slot cover with the corresponding   
					slots; then press the cover flat.   
					10. Tighten the screws of the cover.   
					Attention: After you install a Mini-PCI Card, do not use your computer   
					until you have closed the cover. Never use the computer with the cover   
					open.   
					11. Reinstall the battery. (For information on reinstalling the battery, refer to   
					the ThinkPad T30 Series Service and Troubleshooting Guide.)   
					12. Turn the computer over again. Connect the ac adapter and cables to the   
					computer; then turn it on.   
					Installing the device driver   
					If your computer is a wireless upgradable model, and you are installing the   
					Mini-PCI Card for the first time, you need to install the device driver for the   
					Card. To install the device driver, either click the Software section button of the   
					CD, or refer to the following instructions.   
					The device driver files are in the following directory:   
					C:\DRIVERS\WIN\WLLANINT   
					Note: On some computers, the device driver files are in the following directory   
					instead:   
					C:\IBMTOOLS\DRIVERS\WLLANINT   
					1-10 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
				Installing the device driver in Microsoft® Windows® 98, Windows Me,   
					Windows 2000, or Windows XP   
					To install the device driver in Windows 98, Windows Millennium Edition (Me),   
					Windows 2000 Professional, or Windows XP, do the following:   
					1. Start your operating system. If you are using Windows 2000 or Windows   
					XP, log on with a user ID authorized as an administrator.   
					2. Click Start → Run.   
					3. Specify SETUP.EXE with a full path (C:\DRIVERS\WIN\WLLANINT\SETUP.EXE   
					or C:\IBMTOOLS\DRIVERS\WLLANINT\SETUP.EXE).   
					4. Click OK.   
					5. Follow the instructions on the screen.   
					6. When asked whether you want to restart the system, click Yes.   
					Installing the device driver in Windows NT®   
					To install the device driver in Windows NT, do the following:   
					1. Start Windows NT. Log on with a user ID authorized as an administrator.   
					2. Click Start → Settings → Control Panel.   
					3. Double-click the Network icon.   
					4. If this is the first time the Network has been configured, the Network   
					Configuration dialog box is displayed. Otherwise, go to step 20 on   
					
					5. <First Network Configuration> Click the Yes button.   
					6. Select Wired to the Network.   
					7. Click the Next button.   
					8. Click the Select from list button.   
					9. Click the Have Disk button.   
					10. In the Insert Disk dialog box, type the path (C:\DRIVERS\WIN\WLLANINT or   
					C:\IBMTOOLS\DRIVERS\WLLANINT) to the directory that contains the driver.   
					11. Click the OK button.   
					12. Select High Rate Wireless LAN Mini-PCI Adapter with Modem II.   
					13. Click the OK button.   
					14. Click the Next button.   
					15. Follow the instructions on the screen.   
					16. Follow the prompts for any Windows NT installation disks by typing the   
					path to the directory that contains Windows NT files. (This is usually   
					C:\i386, or, on the Windows NT CD-ROM, X:\i386.)   
					17. Follow the instructions on the screen.   
					18. When the installation is complete, click the Finish button.   
					About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-11   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				19. When asked whether you want to restart the system, click Yes.   
					20. <Add wireless LAN to Network Configuration> Click the Adapters tab.   
					21. Click the Add button.   
					22. Click the Have Disk button.   
					23. In the Insert Disk dialog box, type the path (C:\DRIVERS\WIN\WLLANINT or   
					C:\IBMTOOLS\DRIVERS\WLLANINT) to the directory that contains the driver.   
					24. Click the OK button.   
					25. Select High Rate Wireless LAN Mini-PCI Adapter with Modem II.   
					26. Click the OK button.   
					27. Click the Close button.   
					28. Follow the instructions on the screen.   
					29. When asked whether you want to restart the system, click Yes.   
					1-12 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
				Download from Www.Somanuals.com. All Manuals Search And Download.   
				ꢀꢁꢂ   
					Part Number: 22P7713   
					Printed in U.S.A.   
					(1P) P/N: 22P7713   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |