NEXT
Type No. L22C0E080
Model. W220S
Multi Function 2D/3D Wide Monitor
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
DECLARATION OF CONFORMITY
WE
HYUNDAI IT CORP.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment
Type-Designation
:
LCD MONITOR
L22C0E080
:
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN60950-1:2002
EMC : EN 55022/1998+A1:2000+A2:2003
EN 55024 :1998+A1:2001+A2:2003
EN 61000-3-2:2000+ A2:2005+A2:2005
EN 61000-3-3:1995+A1:2001
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
TUV SUD Product Service GmbH
Ridlerstrasse 65 - 80339 Munchen - Germany
KOREA / May 6, 2008
Jong Won, Choi
Ho Suk, Chon
(Place and date of issue)
(Name and signature of
authorized person)
Download from Www.Somanuals.com. All Manuals Search And Download.
W220S
Multi Function 2D/3D Wide Monitor
Contents
1. Introduction ...................................1/27
2. Safety Information ........................1/27
3. Cautions for Health & Safety.........3/27
4. Handling Instructions.....................5/27
5. 3D Monitor SettingGuide...............5/27
6. Q&A for 3D Mode............................6/27
7. 3D Mode Specification ...................8/27
8. Installing the monitor ...................9/27
9. Adjusting the picture ..................17/27
10. Display power management ......23/27
11. Troubleshooting ..........................24/27
12. Specifications ..............................27/27
Download from Www.Somanuals.com. All Manuals Search And Download.
W220S
Multi Function 2D/3D Wide Monitor
This manual contains instructions for installing and operating
HYUNDAI IT CORP. W220S.
1. Introduction
HYUNDAI IT CORP. W220S is a highly ergonomic color display unit.
+
•
•
•
•
•
•
•
•
•
•
•
22” viewable WSXGA LCD
High quality screen re-scaling capability
100-240V AC input voltage
VESA DPMS (Display Power Management Signaling)
VESA DDC1/2B compatibility
Advanced digital On-Screen-Display controls
Digital Signal Input by DVI-1.0 Compatability
Fast and accurate auto adjustment
Most advanced image scaling
Supporting VESA Flat Panel Monitor Physical Mounting Interface
2D/3D Convertible
2. Safety Information
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind
the following:
Do not place anything wet on the monitor or the power
cord. Never cover the ventilation openings with any
material and never touch them with metallic or
inflammable materials.
Download from Www.Somanuals.com. All Manuals Search And Download.
1/27
W220S
Multi Function 2D/3D Wide Monitor
Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~40°C
Humidity : 30~80RH
Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.
Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.
Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.
Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
2/27
W220S
Multi Function 2D/3D Wide Monitor
- Cleaning and Maintenance
•
•
To avoid to risk of electric shock, do not disassemble the Cabinet of display
Unit. The Cabinet is not user-serviceable. Remember to unplug the display unit
from the power outlet before cleaning.
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
•
•
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
•
If the instructions above do not help in removing stains, contact an authorized
service agent.
3. Cautions for Health &
Safety (Before use)
•
Viewing Time - Do not view the stereoscopic images continuously and take a
rest every 15 minutes.
•
•
Please view the monitor screen within a distance of 60cm ~ 1M.
- Warning
If you have any of the following symptoms, consult with a doctor before use.
- Neck, ear, heart disorder
- Convulsion, photosensitivity
- High blood pressure
•
If you have any problems with your body such as convulsion, paralysis,
disorientation, fainting and confusion, etc. while using it, stop using it and go
to your doctor.
Download from Www.Somanuals.com. All Manuals Search And Download.
3/27
W220S
Multi Function 2D/3D Wide Monitor
•
If you feel any problems as follows, stop using it and take a rest.
- Pain in the eyes, tears, dry eyes, heavy eyelids
- Nausea, vomiting, dizziness, stomach pain, perspiration
- Headache, heaviness in head or dizziness, dry mouth
- Sickness
!
If you don't feel better, go to your doctor.
•
•
Intoxicated and/or medicated persons should not use this product.
- Caution
Persons with nearsightedness or farsightedness, difference in left and right
eyesight, or astigmatism should correct their visions adequately before using it.
Using the polarized glasses over glasses or contact lens does not cause any
problem.
•
•
Do not handle the LCD monitor with bare hands. It can cause you to get
injured.
- Fire / Accident Prevention
Do not place a heavy object over LCD monitor, bend nor give it a shock. It can
break down or get damaged.
Do not disassemble or modify it. It can break down or cause a fire.
If it breaks down or get damaged, unplug the power cord and have it repaired.
Download from Www.Somanuals.com. All Manuals Search And Download.
4/27
W220S
Multi Function 2D/3D Wide Monitor
•
When viewing stereoscopic images, please use the special polarized glasses.
Without this glasses, you can not enjoy stereoscopic images.
If you use some polarized glasses from other companies, you can not fully
enjoy the stereoscopic images.
4. Handling Instructions
How to use
•
•
•
Do no use the polarized glasses for other uses other than 3D viewing.
Do not touch the surface of the monitor screen with bare hands.
When the surface of the monitor screen gets dirty, wipe it clean softly with a
smooth cloth (cotton flannel). Using detergent, solvent, etc. can cause it to get
damaged.
•
•
If the stereoscopic images do not display correctly, read the 3D software “User's
Manual” first, and follow it as described in the manual.
If they still display improperly, do not disassemble it and contact the Customer
Support
For how to operate LCD monitor, read "Handling Manual."
Please DO NOT disassemble the product.
!
5. 3D Monitor Setting
Guide
•
•
Optimal resolution for 3D viewing is 1680*1050/60Hz.
If you run it on different resolutions, its 3D effects can decrease.
Use signal input source at RGB under PC mode or DVI mode.
DVI mode is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
5/27
W220S
Multi Function 2D/3D Wide Monitor
•
•
For 3D viewing, go to 1:1 mode under Display Control of OSD MENU before
viewing it (Monitor Manual: see 21 page).
Viewing on a different mode may decrease 3D effects.
On 1:1 mode, the screen size changes according to the input resolution.
It doesn't mean that it has some problems with it. It just operates 1:1 mode
without scaling the input signal.
1. There is something like oil stain on the monitor screen.
It is due to interferences of light waves within the air layers between the
surface of LCD and the 3D filter. It is not defective.
6. Q&A for 3D Mode
2. 3D stereoscopic images are seen as two separate images.
When you don't wear 3D glasses enclosed Please use the 3D glasses.
When you view it away from visual angle.
- To view 3D stereoscopic imaging optimally, you'd better keep the distance of
60 cm
- 1m from the monitor screen.
- If you exceed 75° out of the left/right visual angle or 10° out of the
top/bottom visual angle while viewing 3D images, you cannot enjoy 3D images
properly. So keep the visual angle as provided above.
Download from Www.Somanuals.com. All Manuals Search And Download.
6/27
W220S
Multi Function 2D/3D Wide Monitor
When you don't set the resolution properly.
- 3D mode displays best in 1680*1050/60Hz resolution.
(See 3D Monitor Setting Guide above )
When the left/right images are reversed
- Change the option to have the image on the right displayed in the horizontal
line of the odd number.
- Read 3D S/W User's Manual enclosed.
- When the image signal is correct but PC input signal is reversed, go to OSD
MENU and PICTURE, and set the value of V-POSITION up or down in the unit
of 1 pixel. You can enjoy 3D images clearly.
3D stereoscopic images are seen as 2D images
- This monitor is a combined 2D/3D monitor. You can enjoy 3D images from 2D
images only when you use 3D S/W enclosed (They may deteriorate their
stereoscopic quality, compared to the contents produced in 3D)
3D images create Ghost effect
- It can happen slightly depending on 3D contents.
- It is due to the different stereoscopic imaging information of the camera when
they are manufactured.(Use 3D contents suitable to this product )
Download from Www.Somanuals.com. All Manuals Search And Download.
7/27
W220S
Multi Function 2D/3D Wide Monitor
The monitor screen reflects my face.
- This monitor has a 3D filter on the surface of the panel. The reflection is
caused by it. You cannot remove it. To reduce the reflected lights, it is
recommended that you don't have any light source behind your back.
3D screen displays dimly
- This product has a 3D filter on the LCD surface to increase 3D stereoscopic
effects. That makes it reduce brightness. Polarized glasses can reduce its
brightness as well.
Alignment distance
3D Viewing Angle
0.6 ~ 1m
H : 150 / V: 10 degree
7. 3D Mode Specification
3D Glasses
2D/3D Image
45 degree(optical axis)
Convertible
3D Output Image Format
Interlace
Download from Www.Somanuals.com. All Manuals Search And Download.
8/27
W220S
Multi Function 2D/3D Wide Monitor
The following items should be found in the packaging.
8. Installing the
monitor
- Packing List
Power Cord
UK
Japan
Europe
Signal Cable
America/Canada
DVI Cable
Australia
South Africa
Audio Cable
Korea
Manual & 3D Soft Program
3D Glasses
Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.
!
Other power cord except the cord packed in the product or longer than 3m
may affect EMC of the product in operating condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
9/27
W220S
Multi Function 2D/3D Wide Monitor
•
•
•
Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
- Selecting a suitable
location
•
•
Position the monitor so that the top of the screen is no higher than eye level.
Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
Before you start cabling your monitor, check that the
power is off on all units. To avoid any possibility of
electric shock, always connect your equipment to
properly earthed outlets.
- Connecting the PC
!
• 15 pin D-sub / DVI-D /
HDMI
1. Insert the other 15-pin/DVI-D/HDMI signal cable connector into the 15-pin
VGA/DVI-D connection on your computer and screw it down.
2. Plug the power cord connection to connection on the monitor.
3. Plug the other end of the power cord to your computer's main supply or to a
100V-240V earthed electrical outlet.
4. Turn on the monitor using the power switch and check that the power LED is
on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of
this guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
10/27
W220S
Multi Function 2D/3D Wide Monitor
•
5. Turn on the power to the computer. The picture will appear within about 10
seconds. Adjust the picture to obtain optimum picture quality. See section
Adjusting the picture in this guide for more information.
Way to Connect
Download from Www.Somanuals.com. All Manuals Search And Download.
11/27
W220S
Multi Function 2D/3D Wide Monitor
• Audio system
This monitor has an audio system including two micro loudspeakers. Each of two
micro loudspeakers has an 3W(max.) output power. This system also supports a
Audio output jack.
This system has been tuned to get a best tone quality which an audio input
level is under 500mv rms. If the input level is more than 500mv rms, you must
!
tune down the audio input as the audio output tone may be distorted.
Speaker
Download from Www.Somanuals.com. All Manuals Search And Download.
12/22
W220S
Multi Function 2D/3D Wide Monitor
Follow the instructions below to set your refresh rate in
Windows 98/ME/XP/2000/VISTA.
- Setting the refresh rate
1. Go to the configuration window(Start-Settings-Configuration window).
2. Double click on the ‘Display’ icon.
3. Click on the ‘Settings’ tab.
4. Click on the ‘Advanced’ button.
5. Click on ‘Adapter’ and select 60Hz from the list.
6. Click on ‘Apply’ to accept the selected value.
Download from Www.Somanuals.com. All Manuals Search And Download.
13/27
W220S
Multi Function 2D/3D Wide Monitor
• Preset Timing Table
If the signal from the system doesn't equal to the preset timing mode, adjust
the mode with reference to the user guide of videocard because the screen
!
may not be displayed.
Supported Mode
No.
Resolution
V-Freq.(hz)
H-Freq.(Khz)
Analog
Digital
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
640 X 350
720 X 400
640 X 480
640 X 480
800 X 600
800 X 600
800 X 600
832 X 624
1024 X 768
1024 X 768
1024 X 768
1152 X 864
1152 X 870
1280 X 960
1280 X 1024
1280 X 1024
1680 X 1050
70.0
70.0
59.9
75.0
56.2
60.3
75.0
74.5
60.0
70.0
75.0
75.0
75.0
60.0
60.0
75.0
60.0
31.4
31.4
31.4
37.5
35.1
37.8
46.8
49.7
48.3
56.4
60.0
67.5
68.6
60.0
63.9
79.9
64.7
18
19
20
21
480 p
576 p
720 p
50/60
50/60
50/60
50/60
Video Mode(HDMI)
1080 i/p
Download from Www.Somanuals.com. All Manuals Search And Download.
14/27
W220S
Multi Function 2D/3D Wide Monitor
- User’s Environment
Recommended Ergonomic User’s Environment
•
Viewing angle of the monitor should be between -5 ~ 15 degree.
Supports Pivot. (Option)
The screen can be vertically rotated by
90 degrees.
This reduces the inconvenience of
having to drag scrollbars and roll mouse
wheels when working with documents
or surfing the web.
* In case that pivot function is not
supported from the graphic card in
your pc, you could use pivot function
by downloading the program
through internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
15/27
W220S
Multi Function 2D/3D Wide Monitor
• Kensington Security
•
•
This display unit supports a Kensington-type security device to secure your
monitor. Kensington lock is not included.
To purchase and install the Kensington locking device, please refer to the
following contact information.
(Locking) Slot
* Kensington Technology Group
· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289
• VESA MOUNT’G
•
•
This display unit supports VESA FPMPMI standard for 100mmx100mm screw
mounting by giving 4 screw holes inside the base stand of the unit.
For buying VESA Flat Panel Monitor Mounting Devices, please contact
following information.
* Ergotron, Inc.
· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands
Desk Mount
Wall Mount
Download from Www.Somanuals.com. All Manuals Search And Download.
16/27
W220S
Multi Function 2D/3D Wide Monitor
You can adjust the screen display by using the buttons located below the
screen.
9. Adjusting the picture
The second Menu from the OSD can't be chosen in digital-mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
17/27
W220S
Multi Function 2D/3D Wide Monitor
To make adjustments in the On Screen Display, follow these steps:
- Using the On Screen
Display
1. Push the MENU button to call the OSD to the screen.
2. Push the
is highlighted.
3. Push the SELECT button to adjust the highlighted item.
4. Use the or button to adjust the selection.
or
button to choose the item you want to adjust. The selected item
5. Push the MENU button to return to the previous menu if you are in a submenu.
6. The display unit automatically saves the new settings in 1 second after your last
adjustments and the menu disappears. You can also push the MENU button to make
the menu disappear.
- Direct access buttons
AUTO ADJUST
At first display a full screen such as Window's back ground.
Push the button SELECT(AUTO) to adjust the shape of screen
automatically.
VOLUME
Use the button
Adjust with
to select the Volume adjustment.
button.
or
SOURCE
Use the button
to switch the other input from current input.
(VGA -> DVI -> HDMI -> VGA)
Download from Www.Somanuals.com. All Manuals Search And Download.
18/27
W220S
Multi Function 2D/3D Wide Monitor
- OSD Adjustments
• Picture
PC MODE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
H.POSITION
To move image left and right.
V.POSITION
To move image up and down
CLOCK
To adjust the horizontal size of the entire screen image.
PHASE
To adjust the noise of the screen image.
AUTO ADJUST
You can adjust the shape of the screen automatically into the full screen pattern.
HDMI MODE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
SATURATION
To adjust color density.
SHARPNESS
To adjust sharpness of screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
19/27
W220S
Multi Function 2D/3D Wide Monitor
PC ANALOG, DVI
• Color
STANDARD
For general Color tone.
REDISH
For Redish color with warm tone.
BLUISH
For Bluish color with cool tone.
USER
For adjusting degree of RGB as User wants
AUTO COLOR (ANALOG ONLY)
TO adjust the horizontal size of the entire screen image.
HDMI MODE
USER
User can adjust directly settings of a screen menu.
STANDARD
For general Color tone.
DYNAMIC
To be Sharper image.
MILD
To be Smoother image.
Download from Www.Somanuals.com. All Manuals Search And Download.
20/27
W220S
Multi Function 2D/3D Wide Monitor
• Sound
VOLUME
To adjust the audio volume level.
BASE
To emphasize low frequency audio.
TREBLE
To empahsize high frequency audio.
BALANCE
To use this function to balance sound from the
left and right speakers.
MUTE
Audio ON or OFF
• Miscellaneous
OSD CONFIGURATION
- OSD TIMER
To adjust OSD Display time on the screen.
- OSD POS
To adjust OSD Display position on the screen.
- TRANSPARENT
To adjust the transparency of OSD window.
- OSD ZOOM
To adjust the size of OSD window.
INPUT SOURCE
To switch between current source and other input source. ( VGA/DVI/HDMI )
Download from Www.Somanuals.com. All Manuals Search And Download.
21/27
W220S
Multi Function 2D/3D Wide Monitor
DISPLAY CONTROL
If you choose DISP. CONTROL on the OSD menu, you can adjust the following
<PC>
- Full (16:10) : Shows full screen regardless of screen size.
-
Aspect : It keeps the vertical & horizontal ratio on the screen and shows with full screen.
- 1:1 : Displays image according to actual input pixels.
- RTC : Implemented only into DVI mode and FULL(16:10) mode
RTC ON or OFF
<HDMI Mode>
- Full (16:10) : Shows full screen regardless of screen size.
- 16 : 9 : Displays image at 16:9 ratio.
- 4:3 : Displays image at 4:3 ratio.
- 1:1 : Displays image according to actual input pixels.
- Zoom1 : Enlarges image by 15%
- Zoom2 : Enlarges image by 20%.
GENERAL RECALL
Recall the saved initial data
• Language
LANGUAGE
You can select the language in which
adjustment menus are displayed. The
following languages are available.
English, German, French, Italian, Spanish,
Dutch, Swedish, Finnish, Danish,
Portuguese, Russian,Korean,Japanese
Chinese.
Download from Www.Somanuals.com. All Manuals Search And Download.
22/27
W220S
Multi Function 2D/3D Wide Monitor
If the power management function of your computer is enabled, your monitor
turns on and off automatically. You can control power management features from
your computer.
10. Display power
management
Your computer may have power management features which enable the computer
or monitor to enter a power saving mode when the system is idle. You can
reactivate the system by pressing any key or moving the mouse.
- Reducing power
consumption
LED
Mode
Power consumption
Blue
RED(Orange)
off
Normal
off
45W (Typ)
1 W (Typ)
1 W (Typ)
Power off
The power button does not disconnect the monitor from the mains. The only
way to isolate the monitor completely from the mains supply is to unplug the
mains cable.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
23/27
W220S
Multi Function 2D/3D Wide Monitor
If your monitor is not functioning properly, you may be able to solve the problem
by following the suggestions below :
11. Troubleshooting
Problem
Possible solution
Blank screen
If the power LED is not lit, push the Soft power switch or check the
AC cord to turn the monitor on. If the display unit is powered
through the computer, check that the computer is switched on.
The display unit might be in standby mode. Push one of the
keyboard keys. Check that the keyboard is properly connected to
the computer.
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. If the connector is
loose, tighten the connector's screws.
Check that the power cable is correctly connected to the display unit
and to the power outlet.
Error message:
Video mode not
supported
Check the resolution and the frequency on the video port of your
computer.
Compare these values with the data in the Preset Timing Table.
The display does The video signal from the computer does not comply with VESA
not enter power DPMS standard. Either the computer or the graphics adapter is not
management
mode
using the VESA DPMS power management function.
Download from Www.Somanuals.com. All Manuals Search And Download.
24/27
W220S
Multi Function 2D/3D Wide Monitor
Problem
Possible solution
Color defects
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. Try another color
temperature.
Size, position,
shape or quality
unsatisfactory
Adjust the picture characteristics as described in the section OSD
Adjustment.
Duplicated
images
A problem with your graphics adapter or display unit. Contact your
service representative.
Image is not
stable
Check that the display resolution and frequency from your PC or
graphic adapter is an available mode for your monitor.
In your PC, you can check through Control panel, Display, Settings.
If the setting is not correct, use your computer utility program to
change the display settings.
Message :
No signal
Check that the signal cabel connector is properly connected and that
the connection pins are not bent or damaged.
If the connector is loose, tighten the connector’s screws.
Check that the computer is switched on.
The power LED is
a orange color
To enter a power saving mode. You can reactivate the system by
pressing any key or moving the mouse.
Download from Www.Somanuals.com. All Manuals Search And Download.
25/27
W220S
Multi Function 2D/3D Wide Monitor
Problem
Possible solution
The power LED is
a orange color
LED Indicator can be orange color on changing of video mode or
Input Signal.
Check the Resolution and the frequency on the video part of your
computer. Compare these values with the data in the Preset Timing
Table.
- Contacting service
If the above troubleshooting hints do not help you find a solution to the problem,
contact an authorized service agent. If the monitor is sent for service, use the
original package if possible.
Unplug the display unit from the power outlet and contact a service agent when:
•
•
•
•
The monitor does not operate normally according to the operating instructions.
The monitor exhibits a distinct change in performance.
The monitor has been dropped or the cabinet has been damaged.
The monitor has been exposed to rain, or water or liquid has been spilled onto
the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
26/27
W220S
Multi Function 2D/3D Wide Monitor
LCD
22" viewable, Diagonal, Pixel pitch 0.282mm, A-si TFT
473.7(H) X 296(V), 22" Diagonal
16.7 million colors ( true 8-bit color )
R.G.B Analog, 15pin D-sub / DVI-D / HDMI
Horizontal : 30.0 to 80.0Khz, Vertical : 56 to 75hz
162Mhz
12. Specifications
Display area
Number of color
Input signals
Frequency rate
Maximum bandwidth
Maximum resolution
Recommanded resolution
Input voltage
1680 X 1050 @ 60hz
1680 X 1050 @ 60hz
100-240V AC, 2.0A
Power consumption
Power management
Plug & Play
45W(Typ.)
VESA DPMS
VESA DDC 1/2B
BRIGHTNESS, CONTRAST, H/W POSITION, CLOCK, PHASE,
AUTO ADJUST AUTO COLOR, SOUND, OSD CONFIGRATION,
INPUT SOURCE, DISPLAY CONTROL, GENERAL RECALL, LANGUAGE
2ch X 3watts / Audio output
100mm X100mm screw mounting
Energystar
OSD menu
Audio system
VESA FPMPMI
Ergonomics,
Safety and EMC
Operating Temperature
cTUVus, TUV, CB, FCC, CE, VCCI, GOST
5 ~ 40O C
7.0Kg unpacked, 9.3Kg packed
8.5Kg unpacked, 10.8Kg packed (Pivot)
522 X 412 X 210 mm
Weight
Dimensions (W X H X D mm)
522 X 415 X 240 mm (Pivot)
• Specification is subject to change without notice.
• HYUNDAI IT CORP. specification on “dead pixel” of LCD Panel applies to ISO 13406-2 Standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
27/27
|