Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
User Instructions
The Federal Communications Commission Radio Frequency Interference Statement includes
thefollowing warning :
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital
devicepursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and,
ifnot installed and used in accordance with the instructions, may cause harmful interference to
radiocommunications. However, there is no guarantee that interference will not occur in a
particularinstallation.
If this equipment does cause harmful interference to radio or television receptions, which can
bedetermined by turning the equipment off and on, the user is encouraged to try to correct
theinterference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for assistance.
User Information
Changes or modifications not expressly approved by the party responsible for compliance could
voidthe user’s authority to operate the equipment.Connecting of peripherals requires the use of
grounded shielded signal cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Important Tip
Image Retention Effect (Image Sticking)
1. Cause :
- Image Retention Effect may come from displaying a still picture in certain period of time with at a
certain area continuously, as the feature of LCD panel. This is caused due to brightness degradation.
Many LCD manufacturers are trying to overcome this limitation.
2. Prevention
- To avoid this matter, use the product after reducing brightness and contrast, especially when a still
image is displaying for a long time. (Contrast 50/Brightness 50 - See 34 page)
Once image retention occurs, use the mode that displays more motion pictures. It will help reduce this
matter.
3. Solution
- The temporary image sticking would decrease with displaying Full-White pattern during 10 hours.
* The permanent image sticking could not take off under the latest technology.
This method may be used to eliminate a temporary retained image that occurs after displaying a still
image for a certain period of time. Since it may take several minutes to several hours to remove image
sticking, it is recommendable to display motion pictures during 2~3 minutes every hour when keeping
displaying a still image. As image sticking is influenced by the brightness of a still image being
displayed and its display time, it is recommended that you reduce the brightness of the screen when
displaying a still image for a long time.
* Image Sticking does not come under the warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Sticking Precaution
When watching a still Image within motion pictures and
Wide/4:3 screen
Wide, 4:3 screen
Box still image
1. Note :
- When the central area of the screen and the screen edges are fixed, the different brightness level of
the edges may cause image retention on the edges when watching for a long time
- This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still image
for a long time.
- If you watch a still image for a long time, this may damage your TV.
* This matter does not come under the warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Features
Integrated HDTV
An HDTV has a built-in ATSC digital tuner.
It does not need a separate set-top box to receive over the-air DTV signal.
Dual Scan/Multi-Viewing
You can program analog TV broadcasting and digital TV broadcasting automatically at the same time
for multi-viewing.
A Wide Array of Screen Settings
You can choose different screen settings depending on the type of program you are watching or the
surrounding conditions (the outside weather conditions). You can switch among Standard, and Mild
options or you can configure the screen settings for yourself.
A Wide Array of Sound Settings
You can choose an optimal sound setting for the type of program you are watching.
You can switch among custuom Standard, movies, Music, and Speech options or you can configure
the sound settings for yourself.
Favorite Channel Memory
You can memorize the channels you are watching frequently.
SRS TrueSurround XT
You can enjoy dynamic and surround sound with ordinary speakers.
Dolby Digital
When receiving digital broadcast signal, you can enjoy dynamic and surround sound with two
ordinary speakers just like Dolby Digital 5.1.
A Variety of Aspect Ratios
You can adjust the screen size at your preference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Table of Contents
How to Set Audio Language ................................................40
How to Set the Digital Audio Output ....................................41
General Information
Safety Precaution ................................................................5
Contents of the Package .......................................................9
Products Sold Separately ......................................................9
Parts Names and Functions ................................................10
Remote Control ...................................................................14
Function Setup
How to Set Auto Lock .........................................................42
How To Set Block Program .................................................44
How to View Closed Captions ..............................................46
How to Set EPG View ..........................................................49
Connections
How to Watch Both Analog and Digital Broadcasts
Setup
with a Single Antenna .........................................................16
Before Connecting the Video/Audio Connections to
How to the Set Date/Time ...................................................50
How to the Set Power on Time ............................................51
How to the Set Power off Time ............................................52
How to the Set Sleep Time ..................................................53
How to Choose Menu Language ..........................................54
How to Set Menu Opacify ....................................................55
How to Set Emergency Alert ...............................................56
How to Set Geometry In PC Mode .......................................57
External Devices... .............................................................17
How to Connect a VCR/Cable Receiver ................................18
How to Connect a SET TO Box or DVD Player ......................19
How to Connect a Camcorder/Game Player .........................20
How to Connect to a PC ......................................................21
HDMI Connection ................................................................23
How to Connect an External Visual Device ...........................25
How to Use Digital Sound ....................................................26
Appendix
Glossary .............................................................................58
Troubleshooting ..................................................................61
Care and Cleaning ..............................................................63
Product Specifications ........................................................64
Channel Setup
How to Select Tuner Mode ..................................................27
How to Store Channels Automatically ..................................28
How to Add/Erase Channels Manually .................................29
How to Set Channel Edit and Favorite Channels ..................30
How to See Signal Strength ................................................31
How to the Input Mode ........................................................32
Picture Setup
How to Select the Picture Mode ..........................................33
How to Set the Desired Picture ...........................................34
How to Select the Aspect Ratio ...........................................35
Sound Setup
How to Select the Audio Mode ............................................36
How to Adjust the Desired Audio Mode ..............................37
How to Use the Automatic Volume Control ..........................38
How to Listen to SRS TruSurround XT (Surround) ................39
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be sure the antenna or
cable system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA
No.70-1984, provides information about proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
Do not connect multiple electrical
Example of Grounding According to National Electrical Code
Instruction
appliances to a single outlet.
- It may cause a fire due to overheating from
the outlet.
Make sure to remove the speakers
before moving the TV with speakers
mounted on it.
- When the speakers are detached from the
unit while carrying it, this may cause damage
to the unit or personal injury.
Do not use or store a flammable
spray or inflammable things near the
TV.
- They may cause explosion or fire.
Any necessary action such as making the
antenna cable loop at the entrance of the
building should be taken to prevent rainwater
on the outdoor antenna cable from possibly
running into the indoor.
Do not install the TV in a
bookshelf, closet, or a place where
there is poor air circulation.
- Fire may be caused due to the rise of
internal temperature.
- If raindrop gets into the LCD TV, it may
cause a fire or an electric shock.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
If there is a persistent accumulation
of dusts or water on the plug, please
make sure to wipe it off using a dry
Do not use a damaged power cord
or plug, or loose outlet.
- It may cause electric shock or fire.
cloth.
- It may cause a fire or an electric shock.
Firmly plug in the power cord so that
it does not pull out.
- An unstable connection may cause fire.
Do not install in a place where there
is oil, smoke, excessive humidity, or
where water may be sprinkled on it.
- This may cause electric shock or fire.
Do not put a water bowl, vase,
candle, bug repellant smoke,
cigarette, plants, or heavy thing on
Do not install on an unstable place
or small support.
- This may cause the TV to fall, resulting in
serious injury to a child or adult.
the TV.
- It may cause electric shock or fire and also
heavy things may cause injury when they
fall.
Never attempt to open, fix, or modify
your TV.
- When there is a need for fixing, call a
service center. Fire or electric shock may be
caused.
When the TV produces abnormal noise,
burning smell, or smoke, unplug the TV
immediately and call a service center.
- Electric shock or fire may be caused.
Do not put a metallic object like chopstick,
wire, or puncher or inflammables like paper
or a match in a vent, headphone jack, or AV
jacks of the TV.
- Electric shock or fire may be caused.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution ......................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
Do not block ventilating slits with a table
cloth.
- Blocking the ventilation slits may produce
inner heat increase, resulting in a fire.
Do not place any heat sources such as
Keep the TV at least 10cm away from the
radiators and heat registers, etc. near the TV.
wall for ventilation.
- It may cause a fire.
- Fire may be caused due to the rise of inner
temperature.
Do not place toys and cookies, etc. on the TV,
which may attract children’s attention.
- If it falls over on children, it may cause serious
injury.
When cleaning the TV, make sure to
disconnect the power plug and use a dry, soft
Do not allow children to climb or play on the
cloth for a cleanup.
TV.
- Please avoid using chemicals such as wax,
- If it falls over on children, it may cause
benzene, alcohol, thinner, mosquito spray,
serious injury.
air freshener, lubricant or synthetic
detergent.
Unplug when you do not use your TV for a
Never touch the power plug or outlet with
wet hands.
long time.
- If dust is stacked on the TV, electric shock
or fire may be caused from heat, fire, or
deterioration of insulation.
- This may cause electric shock.
When moving the TV, two or more people are
advised to carry it.
- Injury or damage may be caused when the
TV falls.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Unplug the product during lightning or
thunderstorms and never touch the antenna
cable.
- It may cause a fire or an electric shock.
Keep the remote control batteries out of
sight and out reach of children.
- If your child swallows a battery, see your
doctor immediately.
Do not install the product on the floor.
- If it falls over, your child may be injured.
In the event of damaging or dropping the
product, switch off the power and remove
the plug.
When replacing batteries, make sure to
match the batteries to the (+) and (-) marks
in the battery compartment.
- Mismatching of polarities may result in
internal damage to batteries, fire due to
leakage or contamination.
- Using a damaged product may cause an
electric shock or a fire.
- Contact your local service center.
Always use the standard batteries and avoid
using old batteries together with new ones.
- Otherwise it may result in internal damage
to batteries, fire due to leakage or
contamination.
Before moving the product, ensure to switch
off the power and unplug all the electrical
cords and the external connection cords such
as an antenna cable and other source
connections, etc.
Consult a service center or customer service
for inside cleaning about once a year.
- When dust is piled inside the TV for long
time, fire or malfunction may be caused.
- An electrical cord(s) may be damaged,
resulting in a fire or an electrical shock.
Ensure the power cord doesn’t trail
across any hot objects like a heater.
- This may cause a fire or an electric shock.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents of the Package
hen opening the package, please ensure to check the following accessories provided.
Antenna Cable
(coaxial cable)
Power Cord
Remote Control & 2 batteries
(1.5V AAA)
User's Guide
Products Sold Separately
If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.
S-video Cable
Hdmi cable
Wall Mounting Support
Component Cable
(Y, Pb, Pr)
Composite Cable
(Video/Audio)
Audio Cable (DVD)
Audio Cable (PC)
PC signal Cable (D-SUB)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Parts Names and Functions
Front View - E260D/E320D/E370D
* This product image may be a bit different from the actual product.
Select button
Speaker
Use this button to select each item of menu.
Remote sensor and power LED.
- Point the remote control toward here.
- It displays standby or operation status.
- Power Indicator Status -
Channel buttons
Use these buttons to change channels. These
buttons also serve as the cursor of Down and
Up buttons when in Menu mode.
Indicator
Red
Status
Standby
Power on
Volume buttons
Use these buttons for your desired sound level.
These buttons also serve as the cursor of
Select/Adjust when in Menu mode.
Green
Power button
Use this button to turn on or off the TV.
Source button
Power switch - For E370D Model Only
Use this button to switch among inputs
Use this switch to turn on/off power.
connected to the TV.
Menu button
Use this button to display or exit from menus.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View - E260D/E320D/E370D
* This product image may be a bit different from the actual product.
Power Switch - For E260D/E320D Only
use this switch to tum on/off
power
D-SUB input terminal
D-SUB Audio input terminal
Component 1 Video input terminal
Component 1 Audio input terminal
Component 2 Video input terminal
Component 2 Audio input terminal
Video input terminal
Power(AC) Input terminal
Connect the power cord to this
terminal.
RS-232 input terminal
Connect to the RS-232 terminal of a
PC to check its service.
S-Video input terminal
S/PDIF optical digital audio
output terminal
S-Video/Video Audio input terminal
Antenna (Analog/DTV) input
terminal
Video output terminal
Audio output terminal
HDMi input terminal
Handle - For E260D Only
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Front View - E261D/E321D/E371D
* This product image may be a bit different from the actual product.
Speaker
Remote sensor and power LED.
Select button
Use this button to select each item of menu.
- Point the remote control toward here.
- It displays standby or operation status.
- Power Indicator Status -
Channel buttons
Use these buttons to change channels. These
buttons also serve as the cursor of Down and
Up buttons when in Menu mode.
Indicator
Red
Status
Standby
Power on
Volume buttons
Use these buttons for your desired sound level.
These buttons also serve as the cursor of
Select/Adjust when in Menu mode.
Green
Power button
Use this button to turn on or off the TV.
Source button
Power switch - For E371D Model Only
Use this button to switch among inputs
Use this switch to turn on/off power.
connected to the TV.
Menu button
Use this button to display or exit from menus.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View - E261D/E321D/E371D
* This product image may be a bit different from the actual product.
Power Switch - For E261D/E321D Only
use this switch to tum on/off
power
D-SUB input terminal
D-SUB Audio input terminal
Component 1 Video input terminal
Component 1 Audio input terminal
Component 2 Video input terminal
Component 2 Audio input terminal
Video input terminal
Power(AC) Input terminal
Connect the power cord to this
terminal.
RS-232 input terminal
Connect to the RS-232 terminal of a
PC to check its service.
S-Video input terminal
S/PDIF optical digital audio
output terminal
S-Video/Video Audio input terminal
Antenna (Analog/DTV) input
terminal
Video output terminal
Audio output terminal
HDMi input terminal
Handle - For E261D Only
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Remote Control
1. POWER/STANDBY
2. POWER LED
3. MUTE
4. ASPECT
5. CAPTION
6. ADD/ERASE
Use this button to add or erase channels.
7. INFOMATION
Use this button to display resolution or various program
8. PICTURE
9. SOUND
10. SRS
Use this button to select 3D surround sound.
11. SAP
Use this button to listen in a foreign language
12. EXIT
Use this button to end the OSD
13. MENU SELECTION
Use this button to select menu item
14. LEFT/RIGHT MOVE/ADJUST
Use these buttons to move between menu items or to adjust
each item.
15. SOURCE
Use this button to select External input
(Option)
(Option)
16. EPG
Use this button to see digital broadcast information
17. MENU
Use this button to call the OSD to the screen.
18. NUMERIC KEYS
19. SERVICE
return to factory setting
20. FAVORITE
use this button when watching your favorite channel.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
21. SLEEP
22. FREEZE
- Option -
23. TILT
24. PIP
- ON/OFF
: Use this button for PIP on/off
- Source
: Use this button to select the source of sub-picture.
- SIZE
: Use this button to select the size of sub-picture.
- POSITION
: Use this button to select the position of sub-picture.
- SWAP
: Use this button to swap main and sub-picture.
How to Insert Batteries in Remote Control
Press and hold Δ part and push
to open cover.
Insert batteries with proper
polarities of +and -.
Use the remote control with cover
closed.
* Battery type :1.5V/AAA
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Watch Both Analog and Digital Broadcasts with a Single Antenna
You can watch both analog and digital broadcasts by connecting a single antenna.
Connection Method
Make sure that the antenna cable is connected to ANT (ATV/DTV).
- Antenna or Cable service without a cable box connections
- For optimum picture quality, adjust antenna direction if need,
- When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.
- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
How to Watch
Turn on TV to activate Auto Channel (See page 28) to memorize the available channels.
1
2
Press
Press
INPUT on remote control until showing TV banner on the buttom side.
button or
button to select the desired channels.
3
Ex.) When you want to watch Digital channel, press Number, -/DRF buttons.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Connecting the Video/Audio Connections to External Devices...
Please make sure to read the following information on connection to enjoy best picture quality.
Video/Audio connectors
Types of video/audio cable :
➀ HDMI ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE
Best picture quality is displayed in the following order.
The superior picture quality starts from the far left side.
- When connecting an external device, ensure to read the connecting device’s manual. The location or the number
of the terminals on the external device may be different depending on its model.
- Connect a HDMI connection to the output of DVD, cable receiver or satellite receiver. Connecting a HDMI
connection to a PC may result in a message, “Unknown Signal”.
- Do not power on until all necessary connections are made. If power is given before connections completed, this
may damage the product.
- Make sure to match the cable in color with the terminal.
- Make sure to check the type of terminals to be connected.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Connect a VCR/Cable Receiver
Connection Method
Connect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver and
Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)
1
2
Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver and
Audio input terminal of TV. (Connect the jacks to terminals in the same color.)
Video/Cable receiver
S-Video Cable
Video cable
Audio cable
How to Watch
Turn on TV and press
on remote control until showing AV1(CVBS)
1
or AV1(S-Video) banner on the botton side.
For more information, read the user’s guide of VCR or cable receiver.
To enjoy better picture quality, use the S-Video cable rather than the composite cable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect a SET-TOP BOX or DVD Player
Connection Method
Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and the
input terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/720p/1080i) on the rear of TV.
(Connect the jacks to terminal in the same color.)
1
Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input
2
terminal for DTV/DVD Audio on the rear of TV. (Connect the jacks to terminals in the same color.)
DTV receiver / DVD Player
Video (Y, Pb, Pr) cable
Audio cable
How to Watch
Turn on TV and press
on remote control until showing YPbPr1 or YPbPr2
1
banner on the botton side
For more information, read the user’s guide of DTV receiver or DVD player.
- Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr according
to the type of DVD player models.
- If your DVD player or Set Top Box supports HDMI /D-SUB, see Connecting to a PC (page 19) for connection.
You can enjoy more clear picture quality.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Connect a Camcorder/Game Player
Connection Method
Connect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player and
Video/S-Video input terminal of TV. (Connect cables and terminal in the same colors.)
1
Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game player
and Audio input terminal of TV. (Connect the jacks to terminals in the same color.)
2
Game Player
Camcorder
S-Video Cable
Audio cable
Video cable
How to Watch
Turn on TV and press
on remote control until showing AV1(CVBS)
1
or AV1(S-Video) banner on the bottom side.
For more information, read the user’s guide of Game player or Camcorder.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect to a PC
Connection Method
Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of
TV.
1
Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of
TV. (Connect the jacks to terminals in the same color.)
2
Audio Cable
HDMI Cable
or
D-SUB cable
When Using as a PC Monitor
Turn on TV and press
on remote control until showing HDMI
1
or VGA banner on the bottom side.
- If you use the HDMI connection, you can enjoy better picture quality.
- This product supports Plug-and-Play function.
- We recommend the above method if the DVD player or set top box supports DTV signal with HDMI/D-Sub (15 pin)
cable for the better picture quality.
- If you input an unsupported resolution in PC or HDMI mode, the screen won’t be displayed properly.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Resolutions Supported in PC
Resolution
640 x 480
720 x 400
800 x 600
Horizontal frequency
Vertical frequency
59.94
31.47
37.50
31.47
37.88
46.88
48.36
56.50
60.02
75.00
70.08
60.32
75.00
60.00
70.10
1024 x 768
75.03
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Connection
HDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that
supportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI*1
input terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such asa Set
Top Box or DVD player with HDMI or DVI output terminal.Input a High-bandwidth Digital Content Protection
(HDCP) high-definition picture source to this HDMI terminal, so youcan display the high-definition pictures on
this TV in the digital form.
HDMI
DVD Player
If the external device has DVI
output only, use a DVI to HDMI
adapter *3 cable to connect to
Set Top Box
the HDMI terminal.
HDMI Cable
Compatible VIDEO Signal
Resolution
1080i
No. of dots(HXV)
1920 X 1080i
720 X 480p
Vertical scanning frequency(Hz)
59.94/60
59.94/60
59.94/60
59.94/60
480p
720p
640 X 480p
1280 X 720p
This input terminal is not intended for use with computers.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz
Notes:
• This HDMI connector is Type A.
• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or
VIDEO input terminal on the TV so you can enjoy an analog signal.
• The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top -
Box DIGITAL OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the Digital
Set -Top -Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does
not have a DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or
Video Input). In this case the picture will be displayed as an analog signal.
How to Watch
Turn on TV and Press
on remote control until showing
1
HDMI banner on the bottom side.
- *1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMILicensing LLC.
- *2 EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video
includinghigh bandwidth digital content protection.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect an External Visual Device
You can connect your TV to other visual device to watch TV program at the same time.
Connection Method
Connect the Composite Video cable between Video input terminals of an external device and the Video output
terminals for Video on the rear of TV.
(Connect the jacks to terminals in the same color.)
1
Connect the Audio cable between Audio input terminal (Left-white, Right-red) of an external device and Audio
output terminal for Video on the rear of TV. (Connect the jacks and terminals in the same color.)
2
For more information, read the user’s guide of an external device.
3
External Visual Device
Video Cable
Audio Cable
Video and Audio outputs are available only when watching an Analog TV, Digital TV or VCR. This is not supported
in the Input Mode of Component, HDMI /D-SUB or S-Video.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Use Digital Sound
Connection Method
Connect the coaxial cable to the digital audio output terminal for coaxial cable or SPDIF optical digital audio
output terminal on the rear of TV.
1
2
3
Select Digital Sound Output. (See page 40~41)
For more information, read the user’s guide of the external sound device.
Amplifier with Built-in Dolby Digital AC3
Coaxial cable
26
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select TUNER MODE
You can choose the RF-input between off-air and cable.
Press Menu button.
Menu items appear on the screen.
Press up or down button to move to “channel”
OK
Press
or
buttons to select “channel”
1
2
3
Press up or down button to move to Tuner Mode
Press or buttons to select Tuner Mode
OK
Press up or down button to move to Air / Cable
and Press button to select item you want.
OK
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Store Channels Automatically
- Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air”
(antenna) and cable channels.
- Before your television can begin memorizing the available channels, make sure to specify the type of the
signal source (antenna or cable) connected to your TV.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to “channel”.
OK
1
Press
or
button to select “channel”.
Press Up or Down button to move to “AUTO SCAN”.
OK
Press
or
button to select “
”.
2
3
AUTO SCAN
Press
button and Auto Scan is Activated
OK
- In the middle of AUTO SCAN, if you press
button once, AUTO SCAN is interrupted.
Press the Menu button to exit. Then the original channel is returned.
- If you have changed the connection of an antenna or cable, perform AUTO SCAN again.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Add/Erase Channels Manually
Users can add or erase the desired channels.
Press channel buttons or the number buttons
on remote control to view the channels that will be
added or erased.
1
- To Add Channel
Add the channel by pressing the ADD/ERASE button.
Channel Added
2
- To Delete Channel
Press the ADD/ERASE button to erase the channel
OK
3
Press Left and Right buttons to set YES/NO .
Press
button to set.
OK
Channel Deleted
4
29
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set Channel Edit and Favorite Channels
Users can store frequently watched channels to quickly access a preferred channel.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to “channel”.
Press
button or
to select “channel”.
OK
1
2
3
Press Up or Down button to move to “channel edit”.
Press
OK
button or
to select “channel edit”.
Press
button to “select”.
OK
You can channel and Favorite-channels by pressing
add/erase, Up/Down, left/right and buttons.
Press MENU or exit button after the setting is done, and you
can save the channels you select.
The Favorite function is available only with remote control.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
How to See Signal Strength
The function is only for DTV channel.
Press menu button.
menu items appear on the screen.
Press Up or Down button to move to “channel” .
Press
or
button to select “channel”.
OK
1
2
Press Up or Down button to move to “signal strength”.
Press or button to select “signal strength”
then the signal strength of anntena appears
OK
on the screen.
Press Menu button after the setting is done.
menu goes to the previous menu
If the Exit button is pressed, the menu will disappear.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set The Input Mode
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to “channel”.
OK
Press
or
button to select “channel”.
1
2
Press Up or Down button to move to “external input” .
Press or button to select “external input”.
OK
Press left or right button to set input mode
Whenever press left/right button to set input mode
Changes in following order.
OK
3
TV(Air/Cable) AV1(CVBS) AV1(S-Video)
YPbPr1 YPbPr2 HDMI VGA
Press Menu button after the setting is done, and Menu goes to the previous Menu.
If the Exit button is prested, the menu will disappear.
You can set the input mode quickly using the remote control press the
button
Whenever press this button, the input mode changes if following order
TV(Air/Cable) AV1(CVBS) AV1(S-Video) YPbPr1
YPbPr2 HDMI VGA
32
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the Picture Mode
Users can automatically adjust the picture mode according to the input mode.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to picture.
OK
Press
or
button to select picture.
1
2
3
Press Up or Down button to move to picture mode
Press or button to select
OK
Whenever you press Up or Down button, the mode
changes in following order.
OK
Custom Standard Mild Vivid
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
CUSTOM : When the user wants to directly set the values See the next page
STANDARD : Most video contents are appropriate to this mode.
MILD : Soft display.
VIVIDI: Clear and Vivid display
How to Directly Select Picture Mode :
Press Pricture button.
- Whenever press this button the mode changes in following arder. Custom
Standard
Mild
VIVID.
- The adjustment of Contrast, Brightness, Sharpness, Saturation and Tint is allowed only in the Custom mode.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set the Desired Picture
Users can manually adjust their desired picture.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to picture.
OK
Press
or
button to select picture.
1
2
Press Up or Down button to move to picture mode
Press button or to select picture mode
OK
Press Up or Down buttom to move to custom and
Press button to make a selection
OK
OK
OK
3
4
5
Press Up or Down buttom to move to Brightness .
Press or button to select Brightness .
Press Left or Right button to adjust.
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
BRIGHTNESS : Adjust the brightness of the entire picture.
SATURATION : Adjust colors into deeper or lighter colors.
CONTRAST : Adjust the brightness and darkness of object and background.
SHARPNESS : Adjust clarity of outline of objects.
TINT : Adjust colors naturally.
COLOR TEMP : Whenever You Press left or right button, the mode changes in
following order NORMAL WARM COOL
DNR : Reuce the Digital Noise in the DTV mode.
SHARPNESS,TINT are not applied to PC and HDMI modes.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the Aspect Ratio
Users can manually adjust size of the screen.
Press Aspect button.
Menu items appear on the screen.
Whenever you press Aspect button,
the mode changes in following order.
WIDE NORMAL ZOOM
AUTO (This is applied in digital broadcasting input mode only.)
The screen size automaticaly changes according to a signal source received
(General broadcast 4:3, Wide broadcast 16:9)
WIDE
General broadcast picture is adjusted
to 16:9.
Normal
4:3 general picture size
ZOOM
Picture enlarged to 16:9 format, letter
box format.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Select the Audio Mode
Users can adjust sound mode automatically as they want.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to sound .
OK
Press
or
button to select sound .
1
2
3
Press Up or Down button to move to sound mode
Press or button to select sound mode.
OK
Mode is selected.
Whenever you press Up or Down button,
the mode changes in following order.
CUSTOM STANDARD MOVIES
MUSIC SPEECH
OK
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
CUSOTM : When the user wants to set the value. See the next page
STANDARD : General sound mode. This fits most audio contents.
MOVIES : For enjoying vivid sound.
SPEECH : For enjoying clear sound.
MUSIC : For enjoying original sound.
How to Directly Select Sound Mode :
Press SOUND button.
Users can select Custom Standard Movies Music Speech
36
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Adjust the Desired Audio Mode
Users can adjust sound mode manually as they want.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to sound.
OK
Press
or
button to move to sound.
1
2
3
4
5
Press Up or Down button to move to sound mode
Press or to select.
OK
Press Up or Down button to move to custom.
and press button to make a selection.
OK
Press Up or Down to select items.
(Table, Boss and blance)
OK
Press
or
button to select items
Move between the items listed using UP or Down button
Adjust the level of the item selected using
Left or Right button.
.
OK
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
TREBLE: Adjusts the range size of high sound.
BASS: Adjusts the range size of low sound.
BALANCE : Adjusts the balance of left and right speakers.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Use the Automatic Volume Control
With this Automatic Volume Level Control, everything you watch will always maintain the volume level that you
decide. Basically it is set to “off”
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to sound .
OK
Press
or
button to select sound .
1
2
3
Press Up or Down button to move to AVL.
Press
OK
or
button to select AVL.
Press
Press
or
button to set to on/off.
OK
button to set to on/off.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
If the SRS TruSurround XT function is activated, the AVL is disabled.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Listen to SRS TruSurround XT (Surround)
Users can enjoy spectacular 3D sound.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to sound.
OK
Press
or
button to select sound.
1
2
3
Press Up or Down button to move to SRS.
Press or button to select SRS.
OK
Press Left and Right buttons to set to
OFF/Tresurround XT .
OK
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.
The SRS TruSurround XT function is activated only when the audio input signal is Stereo.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set Audio Language
While watching a digital program, you can listen to foreign language if the program is supported with foreign
language.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to sound .
OK
Press
or
button to select sound .
1
2
3
Press Up or Down button to move to AUDIO LANGUAGE .
Press or button to select AUDIO LANGUAGE .
OK
Whenever you press Left or Right button,
the mode shifts in following order.
ENGLISH FRANCE SPANISH
OK
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
How to Directly Select Audio Language : Press the
button.
- Whenever you press this button, the mode shifts MONO STEREO SAP in order when receiving analog
signals.
You can select one of the languages listed you prefer when receiving digital signals.
- If you want to see language information while watching a digital channel, press the
language information that is currently received.
button to display
40
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set the Digital Audio Output
The digital audio output terminal allows you to enjoy digital sound. (For more details, see page 24)
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to sound .
OK
Press
or
button to select sound.
1
2
3
Press Up or Down button to move to “DIGITAL AUDIO OUT”
Press or buttons to select Digital Audio out.
OK
Whenever you press Left or Right button, the mode
shifts in following order.
OK
Dolby PCM
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
Manufactured under license from Dolby Laboratories.
“Dolby Digital” and the double-D symbol are trademarks of Dolby Laboratories.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set Auto Lock
This function is used to prevent from using the control buttons on the front top of the TV or from connecting
external devices to the TV. You make sure to set a PIN number to use this function.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to function .
OK
Press
or
button to select function .
1
2
3
4
Press Up or Down buttons to move to “AUTO LOCK”.
Press or button to select “AUTO LOCK”.
OK
Then the Enter PIN number window appears.
The default is 4 digits (0-0-0-0).
- To set Blocking :
Press Up or Down button to move to “SET BLOCKING”.
OK
Press
or
button to select “SET BLOCKING”
Press Up or Down button to move to ON/OFF .
Press button to make a selection.
OK
5
6
- To set Channel blocking :
Press Up or Down button to move to
“CHANNEL BLOCKING”.
OK
Press
button to select “CHANNEL BLOCKING”.
Then the AUX BLOCK items appear.
Press Up or Down button to move to the
item you want.
OK
7
Press
button to set to LOCK/UNLOCK .
If the item is set to ON, such item is disabled.
Continued on next page ......
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued from previous page..... (Set the Lock External Signal function.)
- To update DTV rating :
Press Up or Down button to move to “DTV Rating”.
OK
8
Press
button to select “DTV Rating”.
- To set setup code :
Press Up or Down button to select “SETUP CODE”.
OK
9
Press
button to select “SETUP CODE”
Then the Enter PIN number window appears.
Enter a 4- digit PIN number.
When the Confirm PIN number window appears,
emter the PIN number again
10
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed,
the menu will disappear.
- If you forgot your PIN number, Enter a 4-digit number (2-5-0-1) inthe pin number window.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How To Set Block By Rating
This(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station.
The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by
the categories chosen to be blocked.
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-
video movies use the Movie Rating System (MPAA) only.
Ratings for Movies previously shown in theaters :
Movie Ratings : - Blocking Off
(Permits all programs)
(General audience)
- G
- PG
- PG-13
- R
(Parental guidance suggested)
(Parents strongly cautioned)
(Restricted)
- NC-17
- X
(No one 17 and under admitted)
(Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including made-for-TV movies :
- TV-G
- TV-PG
- TV-14
- TV-MA
- TV-Y
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
(All children)
- TV-Y7
(Children 7 years older)
TV Rating Children : - Age
- Fantasy Violence
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
TV Rating General : - Age
(applies to TV-G, TV-PG, TV-14, TV-MA)
- Dialogue-sexual dialogue (applies to TV-PG, TV-14)
- U Language-adult language (applies to TV-PG, TV-14, TV-MA)
- Sex-sexual situations
- Violence
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
Continued on next page ......
44
Download from Www.Somanuals.com. All Manuals Search And Download.
...... Continued from previous page.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to Auto Lock.
Press
or
button to select Auto Lock.
OK
1
2
The message “Enter PIN” will appear.
Enter your 4-digit PIN number.
Press Up or Down button to move to
“BLOCK BY RATING” and press
to make a selection.
The new screen will appear.
buttons
OK
3
4
5
Press Up/Down and left/right buttons to
select the items (MPAA and TV Parental midelines)
OK
Press up/down and left/right buttons
to select the item
OK
Press
button to make a selection.
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed,
the menu will disappear.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to View Closed Captions
Choices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option.
1. CC MODE :
ON : Captioning information is always shown, when available.
OFF : No captioning information is displayed.
2. PRIORITY :
You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either.
- ANALOG (CAPTION) : You can select a closed caption mode, which is the mode, or source, used for displaying
captioning information for analog channels or digital channels, if available.
• CAPTION :
The form for the words that scroll across the bottom of the TV screen : usually the audio portion of the
program provided for the hearing impaired.
CC 1
: For video related information that can be displayed. Script can be in any language.
CC 2/3/4 : Other modes used for video related information.
• TEXT :
The term for the words that appear in a large black frame and almost cover the entire screen :
Usually message provided by the broad caster.
T 1
: Blanks out a large portion of the picture on the television screen, and display program guide or any
other information currently being transmitted.
T 2/3/4 : other modes that display information and blank out a large portion of the picture of the TV screen.
- DIGITAL (CAPTION) : You can select a closed caption, service mode(1-6) for digital channels.
The service modes support MPEG-2 based transport sources Service 1 and Service2 are the
primary and secondary languages, respectively.
Service3 and service4.5.6 are additional caption sources that may be available.
Continued on next page ......
46
Download from Www.Somanuals.com. All Manuals Search And Download.
...... Continued from previous page.
3. OPTION :
Customized closed captioning for the digital caption by choosing the settings for the following options :
1) cc Background
COLOR : Set the color of the cc Background AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW
-> MARGENTA -> CYAN
OPACIFY : Specify the opacity for the - AUTO -> SOLED -> FIASHUNG -> TRANSLUCENT -> TRANSPARE
2) Caption Text
CAPTION SIZE : Set the size of the words - AUTO -> SMALL -> STANDARD -> LARGE
CAPTION STYLE : Set the style of the words - AUTO -> STYLE1 -> STYLE2 -> STYLE3 -> STYLE4 -> STYLE5
-> STYLE6 ->STYLE7.
TEXT COLOR : Choose a color for the text - AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW
-> MARGENTA -> CYAN
TEXT OPACIFY : Specify the opacity for the text - AUTO -> SOLED -> FIASHUNG -> TRANSLUCENT
-> TRANSPARENT
EDGE STYLE : Select Edge style for the text - AUTO -> NONE -> RASIED -> DEPRESSED -> UNIFORM -> DROP
-> SHADOW
EDGE COLOR : Select Edge color for the text - AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW
-> MARGENTA -> CYAN
ITALIC : Convert the text in to italic - AUTO -> ON -> OFF
UNDERLINE : Add the underline to the text - AUTO -> ON -> OFF
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to function
OK
and press
or
to select function.
1
2
3
4
Press Up and Down buttons to move to
“CAPTION” and press
to make a selection.
or
button
OK
Display MODE is highlighted.
Press Left and Right buttons to select
“OFF” or ALWAYS ON”.
OK
Sub menu item are activated.
Press Up or Down button to move the item.
Press Left or Right button to select the item.
OK
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
- To select caption option
Press Up or Down button to move to caption option.
OK
5
6
Press
or
button to select caption option.
Press left/right buttons to select Auto/Option and
press to select make a selection.
If caption option selected options, CC Background and
caption Text are highlighted When selectiong the
OK
CC Background and caption text, press
button.
Press Up or Down button to move between the items
(cc Background and Caption text)
OK
7
8
Press left/right
buttons to select the item
Then you can choose the CC Background
and caption text by pressing up/down
and left/Right buttons.
OK
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed,
the menu will disappear.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set the EPG View
- This service is only for DTV Model.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to function.
Press button to select function.
OK
or
1
2
3
Press Up or Down button to move to EPG View
OK
Press
or
button to select EPG View
Press
or
button to see the EPG
Then you can get information on the broadcastion
time and program.
OK
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set Date / Time
- Yes can automatocally turn on or off the TV at a present time, To do this, you must set the time it you wish to
use the automatic on or off timers
Press Menu button.
Menu item appear on the screen.
Press Up or Down button to move to setup
OK
Press
or
button to select setup
1
2
3
4
5
Press Up or Down button to move to “DATE/TIME”
Press or button to select “DATE/TIME”
OK
Press Up or Down button to move to manual manually.
Press button to set the current “DATE/TIME”
Press Up/Down and Left/Right buttons to set
year, month, day, Hour, Minute and AM/PM
OK
After setting,
Press
OK
or
button to exit
“AUTO” is only for DTV mode.
If you select “AUTO”,
Press
OK
or
button to select function
Press Up/Down or left/right buttons to timezone
Whenever you press the buttons, timezone
is changed in following order
OK
6
Pacific
Alaska Hawaii
Mountain Central
Atalantic
Eastern
Press Up or Down button to move to “DAYLIGHT SAVING”
Press or button to select “DAYLIGHT SAVING”
OK
7
8
Press Up or Down button to select
observe/Do not observe
OK
Press
or
button to make a selection.
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Power on Time
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to setup.
OK
1
Press
or
button to select setup.
Press Up/Down button to select power on time
OK
2
3
Press
or
button to select power on time.
Press
button to activate power on time
whenever you press left and right button,
the mode shifts in following order
OFF DAILY ONCE
OK
If you select once or daliy in the “ACTIVATE”
You can set time and channel
Press up/down button to select Time
Press
button to set Time
Press Left or Right button to move between Hour,
minute and AM/PM and Press up or down buttons
to set Hour, minute and AM/PM
OK
4
5
Press Up/Down buttons to select channel
Press
Press numeric key to set channel number
Press button to set.
button to set channel.
OK
Press menu button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed,
the menu will disappear.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set Power Off Time
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to setup
OK
Press
or
button to select setup.
1
2
3
Press Up/Down button to move to power off time
OK
Press
or
button to select power off time.
Press
button to activate power off time
whenever you press left and right button, the mode
shift in following order
OFF DAILY ONCE
OK
If you select once or daliy in the “ACTIVATE”
You can set time.
Press Up/Down buttons to select time
Press
button to set time.
Press Left or Right button to move between
Hour, minute and AM/PM
Press Up or Down buttons to set
Hour, minute and AM/PM.
OK
4
Press
button to set
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Sleep Time
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to setup
Press or button to select setup.
OK
1
2
Press Up or Down button to move to sleep time
Press or button to set sleep time.
OK
Press up or down button to set sleep time
whenever you press up or down button the mode
shifts in following order
OK
3
4
OFF 15 MINUTES
30 MINUTES 60 MINUTES
90 MINUTES 120 MINUTES
Press
button to set.
OK
Press MENU button after the setting is done,
and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
How to Directly Set the sleep timer : Press the
button.
30 60
- Whenever press this button, the mode shifts off 15
90
120 minutes
53
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Choose Menu Language
Users can select their language preference in order to display main menus and sub menus, etc.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to setup.
Press
or
button to select setup.
OK
1
2
Press up/down button to move to menu language.
Press
or
button to select menu language.
OK
Press
or
button to set language
Whenever you press Left or Right button,
the mode shifts in following order.
ENGLISH FRANÇAIS ESPAÑOL
OK
3
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Menu Opacify
Users can select their language preference in order to display main menus and sub menus, etc.
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to setup .
OK
Press
or
button to select setup
1
2
3
Press Up or Down button to move to move to
menu opacify
OK
Press
or
button to select menu opacifty
Press left or right to set menu opacify you want.
OK
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
How to Set Emergency Alert
Press Menu button.
Menu items appear on the screen.
Press Up or Down button to move to setup .
OK
Press
or
button to select setup
1
2
Press Up or Down button to move to Energency Alert.
Press or button to select
OK
Energency Alert.
Press Up or Down button to move to Low/medium
Press left or right button to select
OK
3
present/discard.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set the Geometry in PC Mode
This function is only available in PC mode.
Press Menu button.
Menu item appear on the screen.
Press Up or Down button to move to setup.
OK
Press
or
button to select setup.
1
2
3
4
5
Press Up or Down buttons to move to “PC”.
Press or button to select “PC”.
OK
Press Up or Down button to move to position.
Press or button to select position.
OK
Press Up and Down buttons to adjust V-position .
Press or button to adjust H-position.
After setting press button to exit
OK
Press Up and Down buttons to move to “RESET” .
Press or button to adjust H/V-position auto .
OK
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
H. POSITION : To adjust the horizontal position of the picture.
V. POSITION : To adjust the vertical position of the picture.
If the display input signal (resolution) has been changed, the picture will be automatically optimized.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Glossary 1
Component video Component video is sent through three cables: two color shade (chrominance) signals
and one brightness (luminance) signal. Component video achieves greater color
accuracy than composite video or S-VIDEO by splitting chrominance into two separate
portions.
Composite video Composite video is sent through a single cable. Composite video combines the color
shade (chrominance) and brightness (luminance) information into one video signal.
S-VIDEO S-VIDEO requires a single cable, which carries the brightness (luminance) and color
(chrominance) signals of the picture separately. S-VIDEO provides better resolution
than composite video, which carries the signals together.
480i
Provides 480 lines of resolution. Displays images using interlaced scanning, which first
transmits all the odd lines on the TV screen and then the even lines.
480p Provides 480 lines of resolution. Displays images using progressive scanning, which
transmits each line from top to bottom.
720p Provides 720 lines of resolution. Displays images using progressive scanning, which
transmits each line from top to bottom.
1080i
Provides 1080 lines of resolution. Displays images using interlaced scanning, which
first transmits all the odd lines on the TV screen and then the even lines. 1080i is one
of the formats used by HDTV (High Definition TV).
Digital television (DTV) A new technology for transmitting and receiving broadcast television signals. DTV
provides higher resolution and improved sound quality over analog television.
HDTV(High Definition TV) HDTV is a new kind of digital TV, creating a high quality picture, high definition. The
HDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 720p or
higher.
SDTV(Standard Definition TV) SDTV is a new kind of standard definition digital TV, having a range of lower resolution
than the HDTV. Supports 480i.
Cable Broadcast Receiver A device that receives cable broadcasting. Connecting it to your TV set allows you to
watch a various channels.
(Converter)
Satellite Broadcasting Provides crisp picture and clear audio quality throughout the country via a satellite.
VHF/UHF VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300
megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300
to 3,000 megahertz.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary 2
DVD DVD (Digital Versatile Disc) is an optical disc that can store a huge volume of
multimedia such as video, game, and audio application, etc.
Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TV
antenna.
Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9
(widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.
Picture Mode Picture Mode features the optimal picture quality. There are Standard-Dynamic-Movie-
Mild- Custom features in order. “CUSTOM” allows you to adjust Contrast, Brightness,
Sharpness, Color and Tint.
Sound Mode Sound Mode features the optimal sound quality. There are Standard-News-Music-
Sports- Custom features in order. “CUSTOM” allows you to adjust high frequency
sound, middle frequency sound and low frequency sound.
Digital Broadcasting Video and Audio signals digitized and transmitted by broadcasting companies
complying with the new digital television standard developed by the ATSC (Advanced
Television System Committee). Digital Broadcasting technology provides multimedia
services including a variety of additional services as well as high-definition quality
picture.
Analog Broadcasting ATSC-based Video and Audio signals transmitted by broadcasting companies.
SRS TruSurround TX A well-recognized 3D sound technology developed by US SRS Labs, Inc.
This technology delivers the ultimate audio experience only with two speakers as if
through multi-channel speakers.
Dolby Digital
Formerly known as AC-3, Dolby Digital is a digital audio coding technique that reduces
the amount of data needed to produce high quality sound.
Mono Audio signals are produced through a single channel. It is difficult to experience a
spectacular sound since audio signals are reproduced with a single speaker.
Stereo Audio signals are produced through two channels. A spectacular sound is reproduced
with two separated speakers.
Widescreen Term given to picture displays with a wider aspect ratio than NTSC 4:3. Digital HDTV is
16:9 widescreen. Most motion pictures also have a widescreen aspect ratio, some
even wider than 16:9.
External source Refers source signals that come from other external devices such as a VCR, camcorder
and DVD player, etc. than a TV set.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Glossary 3
MTS A bilingual service provided when an overseas film, foreign drama or overseas news,
etc. is aired. You can select one of two choices: mother tongue and foreign language.
Or you can listen to both languages at the same time.
DVI Digital Visual Interface is a specification for digital signals. This interface using TMDS
transmission reduces the loss of signal, allowing to enjoy a clear and crisp image.
HDMI HDMI (High-Definition Multimedia Interface) is the first and only industry-supported,
uncompressed, all-digital audio/video interface.
HDMI provides an interface between any audio/video source, such as a set-top box,
DVD player, or A/V receiver and an audio and/or video monitor, such as a digital
television (DTV), over a single cable.
Virtual channels There is a new numbering system for DTV channels. The system, called the “DTV
virtual channels,” gives a number for each DTV program service, and almost always
uses the analog NTSC channel number as the first number for that station. The use of
virtual channels allows stations to use the same channel number “brand” for both
NTSC and DTV. The printed listing services have not yet changed their format to show
only the DTV virtual channel numbering system. So in the example, the station is using
RF Channel 38 for DTV and is transmitting DTV programs with virtual channel
numbers 15.n. The 15.n is short hand for 15.1, and 15.2 and 15.3, etc., as there can
be more than one DTV program lineup from the station. So, 15.1 is the first DTV
program lineup, 15.2 is the second, 15.3 is the third. Some DTV stations may have
only one virtual channel, others perhaps as many as six.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Installation Problems
Symptom
Possible solution
How can I install an
antenna?
Refer to page 16.
TV screen is not clear after
installing an indoors
antenna.
Indoors antenna may experience poor reception due to surrounding buildings. Please
install an outdoors antenna or wireless antenna.
How can I view cable
broadcasting?
Please install a cable broadcasting receiver (Converter).
Picture Problems
Symptom
Possible solution
Neither picture nor
sound comes up.
Check whether power is on.
Check whether the power is cut or whether power cord is properly connected.
Try to plug another product’s power cord to the outlet the TV is plugged into.
Picture turns on slowly
after power is on.
This symptom is not a malfunction. This delay is designed to prevent the distorted and
noisy picture when power is on. However, if the picture does not appear more than 5
minutes after power is on, call a service center.
Picture is distorted or frozen
while watching digital
broadcasting.
This symptom may be caused by weak reception. Contact your local station or cable
company.
Input Source information
only appears on black
screen.
Check whether your TV is properly connected to external devices.
Poor reception on some
channels.
Check whether you selected proper channels. Try re-orienting your antenna.
Check other channels for black and white screen. Adjust colour.
Black and white on some
channels.
TV won’t turn on.
Ensure the power cord is plugged.
Adjust brightness.
Screen is too bright or too
dark.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Auto On does not work.
Ensure to use the remote control or power button on the product to turn off your TV. If
you unplug the power cord, the stand-by consumption power becomes 0 (zero), which
causes the programmed time to be erased.
After setting the time,
I turned TV off and turn it on.
The programmed information
has been erased.
Ensure to use the remote control or power button on the product to turn off your TV. If
you unplug the power cord, the stand-by consumption power becomes 0 (zero), which
causes the programmed time to be erased.
Sound Problems
Symptom
Possible solution
Too much noise occurs.
Check whether the audio setting is in the Stereo mode. In the Stereo mode, the sound
may be distorted in the area where experiences poor reception or is located far away
from a TV broadcasting station.
No sound while viewing a
cable channel
Make sure an audio or audio/video component is securely inserted into the appropriate
jacks. Check other channels for sound. Check the volume settings on the cable
broadcasting receiver.
Picture is OK but sound does
not come out.
Try to press volume up/volume down buttons of your remote control.
Try to press MUTE buttons of your remote control.
One of the speakers does not
produce sound.
Select sound balance and make proper adjustment. (Page 37)
Check the speaker connection cables.
General
Symptom
Possible solution
Remote control won't work.
Check whether there is a blocking object between the remote control and TV.
Make sure your TV is Power On. (In case of normal, LED on the front panel is in Red.)
Check whether batteries are inserted with proper polarities(+, -).
When the batteries are worn out, replace with new ones.
Where does the S-Video
cable plug in for audio
output?
Connect the two Audio jacks from the S-Video cable to the left and right ports on the
Composite.
Strange noises are heard.
Ticking noise during or after watching is caused by the change of ambient
environment such as humidity and temperature, which is characterized by plastic
products. Strange ticking noise occurs because a signal is suddenly transmitted to the
TV panel. So, this is not a malfunction.
I tried to use the TV screen
as a PC monitor
Adjust the resolution referring to the standard signal mode table. Check the
specification of your video card installed in your PC. If your video card does not work in
supported hardware. Try upgrading the video card’s driver.
but it doesn’t work.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Cabinet Cleaning
Wipe a soft dry cloth.
Do not use inflammables like Benzene or Thinner, or wet clothes.
Do not scratch the panel of LCD with a fingernail or pointed object.
Screen Cleaning
Clean the screen with a soft cloth moistened in mild glass
detergent and dry with a soft cloth.
Never use any solvent on the screen such as Acetone, Benzene, or
Thinner, etc.
Cleaning Inside
When the inside needs to be cleaned, contact a service center or
distribution agent where the item is purchased.
It is recommended cleaning is complete before the rainy season.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Product Specifications - E260D/E320D/E370D
E260D
E320D
E370D
Model
1EA (A/V audio common)
1EA (A/V audio common)
1EA (A/V audio common)
Input
S-Video
1EA (Audio included)
1EA (Audio included)
1EA (Audio included)
Video (RCA)
Component(Y/Cb/Cr)
Antenna
2EA (Audio included)
2EA (Audio included)
2EA (Audio included)
1EA
1EA
1EA
D-SUB
D-SUB
D-SUB
PC Connection jack
Max. resolution
Audio
1024 X 768 @ 75 Hz
1024 X 768 @ 75 Hz
1024 X 768 @ 75 Hz
L/R
L/R
L/R
1EA
1EA
1EA
HDMI-HDCP
Memory Slot
Video
No
No
No
1EA
1EA
1EA
Output
2EA (L/R, SPDiF)
NTSC M / FM
ATSC
2EA (L/R, SPDiF)
NTSC M / FM
ATSC
2EA (L/R, SPDiF)
NTSC M / FM
ATSC
Audio
TV/Video
Analog
Digital
Video system
Component, S-Video,
Composite, PC, HDMI
Component, S-Video,
Composite, PC, HDMI
Component, S-Video,
Composite, PC, HDMI
AC 100 - 240 V, 50/60 Hz
Typical 130W
Under 5W
AC 100 - 240 V, 50/60 Hz
Typical 150W
Under 5W
AC 100 - 240 V, 50/60 Hz
Typical 170W
Power
Supply
Consumption power
Stand-by power
Under 5W
684 x 194 x 541.5
12.6 Kg
806 x 229 x 617
17.0 Kg
939 x 350 x 728
26.6Kg
Dimension (W x D x H mm - Stand included)
Weigh (Stand included)
Control type
Remote control, Key control Remote control, Key control
Remote control, Key control
- The above specifications may be subject to change without prior notice.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications - E261D/E321D/E371D
E261D
E321D
E371D
Model
1EA (A/V audio common)
1EA (A/V audio common)
1EA (A/V audio common)
Input
S-Video
1EA (Audio included)
1EA (Audio included)
1EA (Audio included)
Video (RCA)
Component(Y/Cb/Cr)
Antenna
2EA (Audio included)
2EA (Audio included)
2EA (Audio included)
1EA
1EA
1EA
D-SUB
D-SUB
D-SUB
PC Connection jack
Max. resolution
Audio
1024 X 768 @ 75 Hz
1024 X 768 @ 75 Hz
1024 X 768 @ 75 Hz
L/R
L/R
L/R
1EA
1EA
1EA
HDMI-HDCP
Memory Slot
Video
No
No
No
1EA
1EA
1EA
Output
2EA (L/R, SPDiF)
NTSC M / FM
ATSC
2EA (L/R, SPDiF)
NTSC M / FM
ATSC
2EA (L/R, SPDiF)
NTSC M / FM
ATSC
Audio
TV/Video
Analog
Digital
Video system
Component, S-Video,
Composite, PC, HDMI
Component, S-Video,
Composite, PC, HDMI
Component, S-Video,
Composite, PC, HDMI
AC 100 - 240 V, 50/60 Hz
Typical 130W
Under 5W
AC 100 - 240 V, 50/60 Hz
Typical 150W
Under 5W
AC 100 - 240 V, 50/60 Hz
Typical 170W
Power
Supply
Consumption power
Stand-by power
Under 5W
815 x 194 x 476.5
12.6 Kg
965 x 229 x 551
17.0 Kg
1090 x 310 x 627
26.6Kg
Dimension (W x D x H mm - Stand included)
Weigh (Stand included)
Control type
Remote control, Key control Remote control, Key control
Remote control, Key control
- The above specifications may be subject to change without prior notice.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV
Download from Www.Somanuals.com. All Manuals Search And Download.
|