+89ꢀꢁꢂꢃꢄ*ꢅꢆ+89ꢀꢁꢂꢃꢄ(ꢅ
+89ꢆꢀꢁꢂꢃꢄ*;3ꢅ
ꢆ$1'ꢆ
+89ꢆꢀꢁꢂꢃꢄ(;3
8WLOLW\ꢆ9HKLFOHV
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE
The Husqvarna Limited Warranty appears on the last pages of this manual. No other warranties, express or
implied, are contained herein. Please complete and return the warranty registration card included in this man-
ual.
Husqvarna is not liable for errors in this manual or for incidental or consequential damages that result from the
use of the material in this manual.
This manual contains proprietary information that is protected by copyright. All rights are reserved. No part of
this manual may be photocopied, reproduced, or translated to another language without the written consent
of Husqvarna.
The information contained in this document is subject to change without notice.
Husqvarna reserves the right to change specifications and designs at any time without notice and without the
obligation of making changes to units previously sold.
These vehicles do not conform to Federal Motor Vehicle Safety Standards for automobiles or to FMVSS 500
for low-speed vehicles, and are not equipped for operation on public streets, roads, or highways.
Husqvarna Forest and Garden
7349 Statesville Rd.
Charlotte, NC 28269
USA
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
FOREWORD
Thank you for choosing Husqvarna, a world leader in outdoor products. You have chosen the finest utility
vehicle on the market. Please protect your investment and ensure that your Husqvarna vehicle provides years
of reliable, superior performance by reading and following the maintenance instructions in this manual.
Your comfort and safety are important to us, so we urge you to read and follow the step-by-step operating
instructions and safety precautions in this manual. These instructions must be followed in order to avoid the
risk of severe personal injury. If you rent or loan your vehicle to others, we recommend that you ask them to
read this manual before they operate the vehicle.
Husqvarna products are backed by a customer support system designed to offer you fast, courteous service.
In the event that your Husqvarna vehicle needs repairs or service, we recommend that your local authorized
Husqvarna representative perform them. For the name and address of the Husqvarna representative nearest
Husqvarna, Attention: Marketing Services, 7349 Statesville Rd., Charlotte, NC 28269 USA. Your local autho-
rized Husqvarna representative can also provide technical advice, parts, and service manuals.
We hope you will consider this owner’s manual a permanent part of your Husqvarna vehicle. If you sell the
vehicle, please include the manual so that the next owner will have the important operating, safety, and main-
tenance information it contains. Translated owner’s manuals can be downloaded from the Husqvarna web
Below is a quick reference table of items that will help you maintain this vehicle. These parts can be pur-
chased from your authorized Husqvarna dealer.
REGULAR MAINTENANCE ITEMS
PERIODIC MAINTENANCE ITEMS
Engine Oil Filter (286 cc and 351 cc)
603 00 00-06
Battery (gasoline vehicle)
603 00 00-02
Engine Air Filter (286 cc and 351 cc)
603 00 00-04
Spark Plug O.H.V. (286 cc and 351 cc)
603 00 00-07
Engine Fuel Filter (286 cc and 351cc)
603 00 00-08
Spring Tune-Up Kit
603 00 00-05
Battery Terminal Protector Spray
603 00 00-03
Battery (electric vehicle)
603 00 20-23
Dry Moly Lube
603 00 00-01
Page 2
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Vehicle Feature Identification – HUV4210-E Electric Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vehicle Feature Identification – HUV4210-G Gasoline Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
6
9
9
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Model Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Pre-Operation and Daily Safety Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Driving Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Transporting on a Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Storage – Electric Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Storage – Gasoline Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Periodic Service Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Periodic Lubrication Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Vehicle Controller – Electric Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Batteries – Electric Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Battery Charger – Electric Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Battery – Gasoline Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Engine Oil – Gasoline Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Fueling Instructions – Gasoline Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cleaning the Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Subsequent Owner Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Vehicle Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Warranties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
HUV4210-E ELECTRIC VEHICLE
BATTERY DANGER DECAL
(ON BATTERY CAPS OR ON BODY UNDER SEAT)
ELECTRICAL COMPONENT DECAL
(ON SPEED CONTROLLER COVER)
TOW SWITCH WARNING DECAL
(ON TOW SWITCH BRACKET UNDER SEAT)
SERVICE NOTICE DECAL
(ON BODY UNDER BED)
CHARGER
RECEPTACLE
FORWARD/REVERSE SWITCH
Page 4
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
HUV4210-E ELECTRIC VEHICLE
!
WARNING
ROLLOVER OR FALLING OFF MAY CAUSE SERIOUS INJURY OR DEATH
• Before using vehicle, read operating instructions.
• Do not start vehicle until all occupants are seated.
• Operate from driver side only and not on public roads.
• Drive slowly in turns and straight up and down slopes.
• Never operate under the influence of alcohol or drugs.
• Use brakes to reduce speed when coasting downhill.
• Remain seated while moving.
• Hold on to seat handle while moving.
• Two (2) persons per seat maximum.
• Never stand in front of or behind vehicle.
• Do not leave children unattended on vehicle.
• Keep entire body inside vehicle while moving.
OFF
ON
LIGHT
102825501
SWITCH
DRIVER AND PASSENGER WARNING DECAL
OPERATING INSTRUCTIONS
BATTERY
KEY
SWITCH
CONDITION
INDICATOR
SERIAL
BATTERY
NUMBER
WARNING
LIGHT
(UNDER PASSENGER
SEAT ON FRAME)
ACCELERATOR
PEDAL
PARK BRAKE PEDAL
BRAKE PEDAL
CRUSH AREA AND BED LATCH DECAL (DRIVER SIDE)
!
WARNING
CRUSH AREA
Can cause severe injury.
Stay clear when closing bed.
PULL LATCH AND
OPEN BED
102831901
CRUSH AREA AND BED LATCH DECAL (PASSENGER SIDE)
!
WARNING
CRUSH AREA
Can cause severe injury.
Stay clear when closing bed.
PULL LATCH AND
OPEN BED
102832001
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
HUV4210-G GASOLINE VEHICLE
OPERATING INSTRUCTIONS
!
WARNING
•
•
Read owner’s manual and dash-mounted safety warnings prior to driving.
Study and understand controls.
ROLLOVER OR FALLING OFF MAY CAUSE SERIOUS INJURY OR DEATH
TO START ENGINE
•
•
•
Place shift lever in “N” – Neutral position.
Press brake pedal.
• Before using vehicle, read operating instructions.
• Do not start vehicle until all occupants are seated.
• Operate from driver side only and not on public roads.
• Drive slowly in turns and straight up and down slopes.
• Never operate under the influence of alcohol or drugs.
• Use brakes to reduce speed when coasting downhill.
• Remain seated while moving.
• Hold on to seat handle while moving.
• Two (2) persons per seat maximum.
• Never stand in front of or behind vehicle.
• Do not leave children unattended on vehicle.
• Keep entire body inside vehicle while moving.
Turn key switch to “START position and release.
TO OPERATE VEHICLE
•
•
•
Turn wheels to desired direction and ensure path is clear.
Engine must be at idle before moving shift lever.
While vehicle is stopped, and engine is at idle,
place Forward/Reverse switch in desired position:
F – Forward N – Neutral R – Reverse (Buzzer will sound)
Park brake will release and vehicle will start moving when
accelerator pedal is pressed.
•
OFF
ON
•
•
Slowly press accelerator pedal to increase speed.
To stop, release accelerator pedal and push brake pedal.
START
BEFORE LEAVING
•
•
•
Press park brake pedal until it locks and holds vehicle.
Place Forward/Reverse switch in NEUTRAL position.
Turn key to “OFF” position and remove key when not in use.
102825601
102825401
OPERATING INSTRUCTIONS
DRIVER AND PASSENGER WARNING DECAL
SERIAL
NUMBER
LIGHT
SWITCH
KEY
SWITCH
(UNDER PASSENGER
SEAT ON FRAME)
LOW OIL
WARNING
LIGHT
FUEL GAUGE
ACCELERATOR
PEDAL
PARK BRAKE PEDAL
BRAKE PEDAL
SERVICE NOTICE DECAL
(ON BODY UNDER BED)
CRUSH AREA AND BED LATCH DECAL (DRIVER SIDE)
!
WARNING
CRUSH AREA
Can cause severe injury.
Stay clear when closing bed.
PULL LATCH AND
OPEN BED
102831901
CRUSH AREA AND BED LATCH DECAL (PASSENGER SIDE)
!
WARNING
CRUSH AREA
Can cause severe injury.
Stay clear when closing bed.
PULL LATCH AND
OPEN BED
102832001
Page 6
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
HUV4210-G GASOLINE VEHICLE
GASOLINE WARNING DECAL
(ON VEHICLE FRAME NEAR FUEL TANK)
OIL FILL
ROTATING PARTS AND
HOT MANIFOLD DECAL
(ON STARTER/GENERATOR)
FUEL SHUT-OFF
VALVE
F
N
R
FORWARD/REVERSE
HANDLE
DIODE WIRING DECAL
CHOKE
FRAME GROUND AND
GOVERNOR WARNING DECAL
(ON VEHICLE FRAME NEAR BATTERY)
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Practice Safety
WARNING
!
Rotating Parts
Safety signs like you see above may at first seem shocking, but their impact is mild
compared with the reality of severe personal injury.
Your safety and satisfaction are of the utmost importance to Husqvarna. That is why
before operating the vehicle, we urge you to review the information in this manual.
Understand and become familiar with the DANGER, WARNING and CAUTION state-
ments and procedures it contains, along with the safety decals that are affixed to your
vehicle.
Take time to understand the language of safety. It is a language that can save your life.
PROPOSITION 65 – STATE OF CALIFORNIA
ý WARNING
This product contains or emits chemicals or substances that have been determined by the state of
California to cause cancer and birth defects or other reproductive harm.
Page 8
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Details
SAFETY DETAILS
ý WARNING
• This owner’s manual should be read completely before attempting to drive or service the
vehicle. Failure to follow the instructions in this manual could result in property damage,
severe personal injury, or death.
It is important to note that some vital statements throughout this manual and on the decals affixed to the vehi-
cle are preceded by the words DANGER, WARNING, or CAUTION. For your protection, we recommend that
you take special notice of these safety precautions. Safety precautions are essential and must be followed.
If any of the operation or warning decals on the vehicle become damaged, have been removed or cannot be
easily read, they should be replaced immediately to avoid possible property damage, personal injury, or
death. Contact your Husqvarna dealer.
ý DANGER
• A DANGER indicates an immediate hazard that will result in severe personal injury or death.
ý WARNING
• A WARNING indicates an immediate hazard that could result in severe personal injury or
death.
ý CAUTION
• A CAUTION with the safety alert symbol indicates a hazard or unsafe practice that could
result in minor personal injury.
CAUTION
• A CAUTION without the safety alert symbol indicates a potentially hazardous situation that
could result in property damage.
GENERAL WARNINGS
The following safety statements must be heeded whenever the vehicle is being operated, repaired, or ser-
viced. Vehicle feature identification information is also included on pages 4 through 7. Other specific safety
statements appear throughout this manual and on the vehicle.
ý DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and
service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full
face shield and rubber gloves when working on or near batteries.
• Gasoline – Flammable! Explosive! Do not smoke. Keep sparks and flames away from the
vehicle and service area. Service only in a well-ventilated area.
DANGER CONTINUED ON NEXT PAGE...
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
General Warnings
ý DANGER
• Do not operate gasoline vehicle in an enclosed area without proper ventilation. The engine
produces carbon monoxide, which is an odorless, deadly poison.
• A Husqvarna vehicle will not provide protection from lightning, flying objects, or other storm-
related hazards. If caught in a storm while driving a Husqvarna vehicle, exit the vehicle and
seek shelter in accordance with applicable safety guidelines for your location.
ý WARNING
• Follow the procedures exactly as stated in this manual, and heed all DANGER, WARNING, and
CAUTION statements in this manual as well as those on the vehicle and battery charger.
• Do not leave children unattended on vehicle.
• Prior to leaving the vehicle unattended or servicing the vehicle, set the park brake, place the
Forward/Reverse handle or switch in the NEUTRAL position, turn the key switch to the OFF
position, and remove the key. Chock the wheels when servicing the vehicle.
• Improper use of the vehicle or failure to properly maintain it could result in decreased vehicle
performance, severe personal injury, or death.
• Any modification or change to the vehicle that affects the stability or handling of the vehicle,
or increases maximum vehicle speed beyond factory specifications, could result in severe
personal injury or death.
• Do not operate the vehicle without an installed front bumper or brush guard that is
specifically designed and approved for use on this vehicle. Instability in the vehicle could
cause serious injury or death (Figure 3 and Figure 4).
• Check the vehicle for proper location of all vehicle safety and operation decals and make sure
they are in place and are easy to read.
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle.
If the vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is
raised. Do not close bed until all persons are clear of cargo bed area. Keep hands clear of all
crush areas. Do not drop cargo bed; lower gently and keep entire body clear. Failure to heed
this warning could result in severe personal injury or death.
• Only trained technicians should service or repair the vehicle or battery charger. Anyone doing
even simple repairs or service should have knowledge and experience in electrical and
mechanical repair. The appropriate instructions must be used when performing maintenance,
service, or accessory installation.
Gasoline vehicles:
• To avoid unintentionally starting the vehicle:
- Disconnect battery cables, negative (–) cable first (Figure 1).
- Disconnect the spark plug wire from the spark plug.
• Frame ground – Do not allow tools or other metal objects to contact frame when
disconnecting battery cables or other electrical wiring. Do not allow a positive wire to touch
the vehicle frame, engine, or any other metal component.
Electric vehicles:
• Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries.
Failure to heed this warning could result in a battery explosion or severe personal injury.
• To avoid unintentionally starting the vehicle, disconnect the batteries as shown (Figure 2,
Page 11).
• After disconnecting the batteries, wait 90 seconds for the controller capacitors to discharge.
WARNING CONTINUED ON NEXT PAGE...
Page 10
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
ý WARNING
• Use insulated tools when working near batteries or electrical connections. Use extreme
caution to avoid shorting of components or wiring.
All vehicles:
• Wear safety glasses or approved eye protection when servicing the vehicle or battery charger.
Wear a full face shield and rubber gloves when working on or near batteries.
• Do not wear loose clothing or jewelry such as rings, watches, chains, etc., when servicing the
vehicle or battery charger.
Place Tow / Run
switch in TOW
W
TO
G
NIN
R
A
W
AS SEEN FROM
PASSENGER SIDE
OF VEHICLE
Place TOW/RUN switch in the TOW
position before disconnecting or
connecting battery cables.
S
O
P
N E G
FR
ONT
OF VEHICLE
1
Remove
negative
cable first.
S
O
P
2
N E G
DISCONNECT BATTERY CABLES
BEFORE WORKING ON VEHICLE
FRONT OF
VEHICLE
3
4
Remove negative (–)
cable first.
Figure 1 Gasoline Vehicle
Figure 2 Electric Vehicle
GENERAL INFORMATION
This manual features two models: the electric vehicle and the gasoline vehicle. Throughout this manual,
important features unique to each model are highlighted. We urge the owner/operator to read and understand
this manual, and to pay special attention to the features specific to his/her vehicle(s).
FRONT BUMPER AND BRUSH GUARD
The front bumper and brush guard are an important part of the vehicle’s design for correct weight distribution.
These parts are interchangeable, but one or the other must be installed at all times during vehicle operation
to achieve proper balance (Figure 3 and Figure 4). See following WARNING.
ý WARNING
• Do not operate the vehicle without an installed front bumper or brush guard that is
specifically designed and approved for use on this vehicle. Instability in the vehicle could
cause serious injury or death.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Model Identification
Figure 3 Bumper
Figure 4 Brush Guard
MODEL IDENTIFICATION
The serial number of the vehicles are printed on two bar code decals. (Example: HH0501-583947) (Figure 5).
One is mounted on the frame, under the bed, on the passenger side. There is also a second serial number
decal mounted on the front frame behind the dash. The dash must be removed to view this decal. See fol-
lowing NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
SERIAL NUMBER
7349 STATESVILLE RD.
HH0501-583947
CHARLOTTE, NC 28269
Figure 5 Gas Vehicle Serial Number
Page 12
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
CONTROLS AND INDICATORS
See General Warnings on page 9.
ý WARNING
• If renting or loaning the vehicle, make sure the driver is familiar with all controls and
operating procedures before allowing the vehicle to be driven.
• Do not shift the Forward/Reverse handle or switch while the vehicle is moving. To avoid injury
to an unsuspecting passenger or damage to the vehicle, always bring the vehicle to a full stop
before shifting the Forward/Reverse handle or switch.
• Release the accelerator pedal and then press the brake pedal firmly until the vehicle stops. To
avoid unintentionally starting or rolling the vehicle, set the park brake, place the Forward/
Reverse handle or switch in the NEUTRAL position, turn the key switch to the OFF position,
and remove the key when leaving the vehicle.
• Gasoline vehices only: Do not tamper with the governor. Doing so will void the warranty, as
well as damage the engine and other components, and could result in property damage,
personal injury, or death due to unsafe speeds.
KEY SWITCH
Gasoline Vehicles
The key switch is mounted on the dash to the right of the steering column (Figure 6). It has three positions,
OFF, ON and START. To start the vehicle, place the Forward/Reverse handle in the NEUTRAL position and
turn the key past the ON position to the START position and hold until the engine is running smoothly. When
the engine is cold it may be necessary to use the choke. See Choke on page 18. Release the key and it will
return to the ON position and the engine should idle. The engine will continue to idle until the key is turned to
the OFF position. See following WARNING, CAUTION and NOTE.
ý WARNING
• Moving parts! Keep clear of the engine compartment while the engine is running.
CAUTION
• Do not “rev” the engine for long periods of time while the Forward/Reverse handle is in the
NEUTRAL position. Failure to heed this caution could result in damage to the unitized
transaxle.
• Do not shift the Forward/Reverse handle while the accelerator pedal is pressed. Shift the
handle only when the vehicle is at a complete stop. Failure to heed this caution could result in
damage to the unitized transaxle.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
NOTE: The key can be removed only when the key switch is in the OFF position.
GAS VEHICLE SHOWN
Figure 6 Key Switch
Electric Vehicles
The key switch is mounted on the dash to the right of the steering column. It has two positions, OFF and ON,
which are clearly labeled. See following NOTE.
NOTE: The key can be removed only when the key switch is in the OFF position.
FORWARD/REVERSE CONTROL
Gasoline Vehicles
The Forward/Reverse handle is located on the seat support panel (Figure 7). The handle has three distinct
positions: F (FORWARD), N (NEUTRAL), and R (REVERSE). Rotate the handle towards the driver (FOR-
WARD) to operate the vehicle in the forward direction, or towards the passenger (REVERSE) to operate the
vehicle in reverse. Husqvarna vehicles operate at reduced speed in REVERSE. The engine can be started
only when the handle is in the straight up position (NEUTRAL). The engine must be at idle before shifting the
Forward/Reverse handle. See WARNING and CAUTION on page 13.
Electric Vehicles
The Forward/Reverse rocker switch is located on the seat support panel (Figure 8). The F (FORWARD) and
R (REVERSE) positions are clearly marked. Push down the FORWARD side of the switch to operate the vehi-
cle in the forward direction, or push down the REVERSE side of the switch to operate the vehicle in reverse.
When the rocker switch is positioned in the NEUTRAL position, with neither side down, the vehicle will not
operate if the accelerator pedal is pressed . The reverse buzzer will sound as a warning when the Forward/
Reverse switch is in the REVERSE position. Husqvarna vehicles operate at reduced speed in REVERSE.
Page 14
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
F
R
Figure 7 Forward/Reverse Handle – Gas Vehicle
Figure 8 Forward/Reverse Rocker Switch – Electric
Vehicle
Figure 9 Accelerator and Brake Pedals
ACCELERATOR PEDAL
The accelerator pedal is the pedal on the right, with the word GO molded into it (Figure 9).
Electric Vehicles
The operation of the accelerator pedal differs from that of an automobile. When the key switch is in the ON
position, and the Forward/Reverse switch is in either the FORWARD or REVERSE position, pressing the
accelerator pedal will automatically release the park brake and start the vehicle moving in the direction
selected (forward or reverse). As the accelerator pedal is pressed, speed will increase until full speed is
reached. When the accelerator is released, power will be cut off and the motor will stop running.
Electric vehicles use a special system, which employs motor braking in some modes of operation. In those
modes, the vehicle operates as follows:
Gasoline Vehicles
After starting the engine with the key switch and placing the Forward/Reverse handle in the FORWARD posi-
tion, the vehicle should accelerate smoothly to full speed as the accelerator pedal is pressed. When the pedal
is released it should return to the original position and the engine should idle.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
BRAKE PEDAL
The brake pedal is the large pedal on the left with the word STOP molded into it (Figure 9). To slow or stop
the vehicle, press the brake pedal with your foot (Figure 10).
Figure 10 Brake Pedal
Figure 11 Park Brake Pedal
PARK BRAKE PEDAL
The park brake pedal is the small raised portion in the upper left corner of the brake pedal. It has the word
PARK molded into it and the words PARK BRAKE marked on top of it (Figure 10). To set the park brake,
press the brake pedal firmly and tilt the park brake portion of the pedal forward with your foot (Figure 11). See
following WARNING.
ý WARNING
• The park brake will release automatically when either the accelerator or brake pedal is
pressed. The park brake has multiple locking positions and should be firmly pressed and
locked to prevent the vehicle from rolling.
BATTERY WARNING LIGHT
Electric Vehicles Only
Electric vehicles feature a dash-mounted warning light (to the right of the key switch) that, when the vehicle is
in operation, indicates low battery voltage or, when the vehicle is being charged, indicates a charging prob-
lem. The warning light is controlled by the onboard computer.
When the vehicle is in operation, the warning light will illuminate and remain illuminate if:
• Batteries’ voltage drops below 48 volts when there is no load on the batteries (the vehicle is stopped
and there are no accessories on).
• Batteries have discharged to less than 25% of rated capacity.
If the warning light illuminates when the vehicle is operating, there will be enough power remaining to drive the
vehicle for approximately 30 minutes. However, the vehicle should be charged at the first opportunity. If the
warning light illuminates and the vehicle is unable to operate for 30 minutes, have your Husqvarna distributor/
dealer check the vehicle for a possible battery or electrical system problem.
When the batteries receive an incomplete charge because 1) the DC power cord is disconnected, 2) AC
power to the charger is interrupted, 3) automatic charger shut-off occurs after 16 hours of operation, or 4) the
charger malfunctions, the warning light will indicate as follows:
Page 16
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
• The warning light will not illuminate if the charge is 90% or more complete. The onboard computer will
retain in memory the amount of charge needed to fully replenish the batteries and will complete the
charge during the next charge cycle.
• When the charger is unplugged, the warning light will illuminate and remain illuminated for 10 seconds
if the charge is less than 90% complete but the vehicle has enough power for approximately 30 min-
utes of operation. This will alert the operator that the vehicle may be used, but that it must be charged
to completion as soon as possible.
• The warning light will repeatedly illuminate for 10 seconds, with 4 second intervals if the charger times
out at 16 hours and the batteries are not sufficiently charged. See the battery charger owner’s man-
ual. This indicates an abnormal charge cycle. The charger and batteries should be checked by your
Husqvarna distributor/dealer.
• The warning light will repeatedly illuminate for 10 seconds, with 4 second intervals during a charge
cycle (DC plug is still connected) if AC power to the charger is interrupted. The light will go out when
AC power is restored.
LED Light: In addition to the warning light, there is an infrared LED in the dash light assembly, which trans-
mits an infrared signal from the onboard computer (OBC). This signal is received by the optional Communi-
cation Display Module (Husqvarna 603 00 18-63), which provides information on the condition of the vehicle
and batteries.
TOW/RUN SWITCH
Electric Vehicles Only
ý WARNING
• Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries.
Failure to heed this warning could result in a battery explosion or severe personal injury.
• When the Tow/Run switch is in the TOW position, all motor braking functions, including zero
speed detect, are disabled.
Electric vehicles are equipped with a Tow/Run switch, located under the seat just above the Forward/Reverse
switch (Figure 12). The switch must be in the RUN position in order to operate the vehicle. When the switch
is in the TOW position, power to the vehicle electrical components is turned off and the vehicle will not oper-
ate. See following NOTE.
NOTE: After placing the Tow/Run switch in the TOW position, allow 10 seconds to elapse before switching
back to the RUN position.
After placing the Tow/Run switch in the RUN position, allow 10 seconds to elapse before operating
the vehicle.
The Tow/Run switch should be placed in the TOW position under the following conditions:
• Before Towing the Vehicle: Place the Tow/Run switch in the TOW position to disable all motor braking
functions, thus preventing possible damage that could occur to the vehicle or electrical components if
the vehicle is towed while the zero speed detect motor braking function is operating.
• Before Disconnecting or Connecting Battery Cables: Place the Tow/Run switch in the TOW posi-
tion to turn off power to the vehicle electrical system, thus preventing severe arcing and possible bat-
tery explosion as the battery cables are disconnected.
• For Long Term Storage: Place the Tow/Run switch in the TOW position to turn off power to the vehicle
electrical system, thus preventing vehicle electrical components from discharging the batteries.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
N
RU
W
TO
RNING
A
W
F
Figure 12 Tow/Run Switch
CHOKE
Gasoline Vehicles Only
The choke is located on the seat support panel below and to the left of the driver’s left knee (Figure 13). If the
vehicle is hard to start in cool or cold temperatures, simply push in the choke cover to activate it. Hold it during
start up and release the choke cover after the engine starts and runs smoothly.
1
2
Figure 13 Choke
Figure 14 Low Oil Warning Light and Headlight
Switch
LOW OIL WARNING LIGHT
Gasoline Vehicles Only
The gasoline golf car is equipped with a low oil warning light (1), located on the dash panel to the right of the
key switch (Figure 14). If the warning light comes on, oil should be checked and added to the engine as nec-
essary before continuing to use the vehicle. The vehicle should never be driven with the low oil warning light
remaining on. If the warning light goes on and off, you may proceed, but oil should be added at the first oppor-
tunity. If the oil level is correct and the warning light stays on, have a trained technician check the vehicle. See
following CAUTION.
Page 18
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-Operation and Daily Safety Checklist
CAUTION
• Failure to add oil immediately when the low oil warning light stays on may result in permanent
engine damage.
HEADLIGHT CONTROL
The headlight control (2) is located on the dash to the left of the key switch (Figure 14). Pull out to turn the
lights on, push in to turn the lights off. The headlights operate on 12 volts DC from the battery. See following
NOTE.
NOTE: Using the headlights for extended periods of time without the engine running, or with the engine
idling, will discharge the battery.
12-VOLT OUTLET ACCESSORY
Some vehicles are provided with a 12-volt outlet, protected with a 10 amp fuse, located in the fuse box under
the seat. To use, push in a cord designed for this type of outlet.
Be sure to disconnect electronic devices from the accessory outlet before the vehicle batteries are charged.
See following CAUTION.
ý CAUTION
• Do not leave electronic devices connected to the accessory outlet while the vehicle batteries
are being charged. The voltage output can fluctuate from 12 volts to 19 volts while the vehicle
batteries are charging, and this voltage fluctuation can damage some electronic devices.
To remove a power cord from the accessory outlet, rotate it counterclockwise, align the arrows and pull the
cord out of the outlet.
Extended use of this accessory can cause the batteries to become heavily discharged. If the vehicle batteries
become deeply discharged, charge the batteries as instructed in the owner’s manual appropriate to the vehi-
cle, or contact your local Husqvarna dealer for instructions.
Inspect the accessory outlet periodically to ensure the electrical connection is clean and free of corrosion.
PRE-OPERATION AND DAILY SAFETY CHECKLIST
Each Husqvarna vehicle has been thoroughly inspected and adjusted at the factory; however, upon receiving
your new vehicle(s), you should become familiar with its controls, indicators, and operation. Carefully inspect
each vehicle to ensure that it is in proper working condition before accepting delivery.
Use the following checklist as a guide to inspect the vehicle. This checklist should be used daily to ensure that
the vehicle is in proper working condition and in conjunction with the Periodic Service Schedules on page 29.
Any problems should be corrected by a Husqvarna distributor/dealer or a trained technician.
• General: All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws
are tight. On gasoline vehicles check all hose clamps for tight fit as well as the starter belt for tightness.
• Safety and information decals: Check to ensure that all safety and information decals are in place.
See pages 4 through 7.
• Tires: Check for proper tire pressure. Visually inspect tires for wear, damage, and proper inflation on a
daily basis. See Vehicle Specifications on page 46.
• Battery(ies): Check electrolyte to ensure that it is at its proper level (Figure 21, Page 35 or Figure 26,
Page 40). Check battery posts. Wires should be tight and free of corrosion. On electric vehicles charge
batteries fully before first use of vehicle.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-Operation and Daily Safety Checklist
• Charger cord, plug, and receptacle (electric vehicles): Visually inspect for cracks, loose connec-
tions, and frayed wiring. See Plug and Receptacle on page 38.
• Engine (gasoline vehicles): Check for proper engine oil level. See Engine Oil – Gasoline Vehicles
on page 41.
• Fuel (gasoline vehicles): Check fuel level. See Fueling Instructions – Gasoline Vehicles on
page 44. Check fuel tank, lines, cap, pump, fuel filters, and carburetor for fuel leakage.
• Exhaust system (gasoline vehicles): Check for leaks.
ý WARNING
• Be sure the plastic has been removed from the seat bottom before operating the vehicle.
Failure to do so may result in a fire, property damage, personal injury, or death.
PERFORMANCE INSPECTION
After you have familiarized yourself with the vehicle controls and have read and understood the driving
instructions, take the vehicle for a test drive.
Use the following checklist as a guide to inspect the vehicle and check daily for proper operation. Any prob-
lems should be corrected by a Husqvarna distributor/dealer or a trained technician.
All Vehicles
• Forward/Reverse control: Check for proper operation. See Controls and Indicators on page 13.
• Brakes: Be sure the brakes function properly. When brake pedal is fully pressed under moderate pres-
sure, it should not go more than halfway to the floor, and vehicle should come to a smooth, straight stop.
If the pedal goes more than halfway to the floor, or if the vehicle swerves or fails to stop, have the brake
system checked and adjusted as required. Brake adjustment must be maintained so that the brake
pedal cannot be pressed to the floor under any circumstance.
• Park brake: When latched, the park brake should lock the wheels and hold the vehicle stationary (on
an incline of 20% or less). It should release when either the accelerator or brake pedal is pressed.
• Reverse buzzer: The reverse buzzer should sound as a warning when the Forward/Reverse handle or
switch is in the REVERSE position.
• Steering: The vehicle should be easy to steer and should not have any play in the steering wheel.
• General: Listen for any unusual noises such as squeaks or rattles. Check the vehicle’s ride and perfor-
mance. Have a Husqvarna distributor/dealer or a trained technician investigate anything unusual.
Electric Vehicles
• Accelerator: With the key switch in the ON position and the Forward/Reverse switch in the FOR-
WARD position, as the accelerator pedal is pressed, the motor should start and the vehicle should
accelerate smoothly to full speed. When the pedal is released it should return to the original position
and the motor should rotate freely or go into motor braking mode. See Pedal Up Motor Braking
below. All Husqvarna vehicles operate at reduced speed in reverse.
• Zero Speed Detect: With the vehicle parked on level ground and the park brake disengaged, place the
Tow/Run switch in the RUN position and attempt to push the vehicle. Motor braking should engage and
cause resistance to rolling (moving at no more than 1 to 3 mph) (1.5 to 4.8 km/h) with the Forward/
Reverse switch in any position. When zero speed detect motor braking is engaged, the reverse buzzer
should emit a distinct pattern of beeps. See following WARNING.
Page 20
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
ý WARNING
• Zero-speed detect will not limit vehicle speed to 1 mph (1.6 km/h) on very steep grades. Do
not operate vehicle on slopes exceeding 20% grades.
• Pedal Up Motor Braking (adjustable on IQ System vehicles): Accelerate the vehicle to full speed
and then release the accelerator pedal. Motor braking should quickly and smoothly slow the vehicle to
approximately 11 mph (17.7 km/h). Motor braking will disengage when vehicle slows to 11 mph (17.7
km/h). This feature is adjustable for IQ System vehicles only. Contact your local Husqvarna dealer/dis-
tributor to inquire about this adjustable feature.
• Pedal Down Motor Braking: Accelerate down an incline with the accelerator pedal pressed. When the
vehicle reaches maximum designed speed, motor braking should engage and limit the vehicle to its
maximum designed speed. On very steep grades, the vehicle may slightly exceed its maximum
designed speed, requiring use of the brake pedal.
Gasoline Vehicles
• Accelerator: With the key switch in the ON position and the Forward/Reverse switch in the FOR-
WARD position, as the accelerator pedal is pressed, the engine should start and the vehicle should
accelerate smoothly to full speed. When the pedal is released it should return to the original position
and the engine should stop. All Husqvarna vehicles operate at reduced speed in reverse.
• Governor: Check maximum speed of the vehicle. The vehicle should operate at 17 mph (27 km) on a
level surface.
DRIVING INSTRUCTIONS
ý WARNING
• Only licensed drivers should be allowed to drive the vehicle.
• If renting or loaning the vehicle, make sure the driver is familiar with all controls and
operating procedures before allowing the vehicle to be driven.
• No more than two people should be on the vehicle at one time.
• The vehicle is not specially equipped for handicapped persons:
- Be sure all persons can properly operate the vehicle prior to allowing them to drive the
vehicle.
- Be sure all passengers are capable of securing themselves in a vehicle before allowing
them to ride in one.
• For night use, the vehicle must be equipped with headlights, taillights and reflectors.
• Stop the vehicle before shifting the Forward/Reverse handle. Failure to do so may result in
injury to an unsuspecting passenger and (or) damage to the vehicle.
• To help avoid being struck, do not stand in front of or behind the vehicle.
• Operate the vehicle from the driver seat only.
• To help prevent falls from the vehicle, remain seated in a moving vehicle and hold on to hand
holds or handrails at all times. Driver should keep both hands on the steering wheel when the
vehicle is in motion.
• To help prevent the possibility of serious injury, keep your entire body inside the vehicle.
• Do not leave children unattended on vehicle.
• To help prevent overturning the vehicle, drive slowly straight up and down slopes. Avoid
driving the vehicle on slopes exceeding 20% incline.
WARNING CONTINUED ON NEXT PAGE...
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
ý WARNING
• To help avoid possible injury to an inattentive passenger and (or) damage to the vehicle, avoid
sudden starts, sudden stops, and abrupt turns.
• To help avoid the possibility of losing control of or overturning the vehicle, reduce speed for
adverse driving conditions such as wet grass or rough terrain.
• Do not use the vehicle on public roads. It is not designed or intended for street use and
should not be licensed for use on public roads.
• Obey all local rules.
• The vehicle should be driven in only specified areas by trained drivers.
• Do not drive while under the influence of alcohol, drugs, or medications.
• To prevent overturning the vehicle, drive slowly in turns.
• Use brakes to reduce speed when coasting downhill.
No one should drive the vehicle without first being instructed in the proper operation and use of the vehicle’s
controls. An experienced operator should accompany each first-time driver on a test drive before allowing
him/her to operate the vehicle alone.
To ensure safe operation of the vehicle, follow exactly and in order, all of the following procedures. Read and
understand all instructions prior to driving the vehicle.
STARTING THE VEHICLE
Electric Vehicles
1. Study and understand controls.
2. Make sure everyone is seated and holding onto seat hand holds or handrails.
3. Read safety warnings located on dash and (or) above pedals.
4. Make sure wheels are turned in desired direction.
5. Turn the key to the ON position and make sure nothing is in your path.
6. Select direction by placing the Forward/Reverse switch in desired position (F = forward or R = reverse).
A buzzer will sound as a warning when the Forward/Reverse switch is in the REVERSE position.
7. Slowly press accelerator pedal. The park brake will release automatically and the vehicle will start to
move. As the accelerator pedal is pressed, speed will increase until full speed is reached. See following
WARNING.
ý WARNING
• Operator must control vehicle speed when going downhill.
• Pedal down or pedal up motor braking may be used to help control speed when going
downhill; however, steep terrain or other conditions may require that pedal braking be used in
conjunction with motor braking.
Gasoline Vehicles
1. Study and understand controls.
2. Make sure everyone is seated and holding onto seat hand holds or handrails.
3. Read safety warnings located on dash and (or) above pedals.
4. Make sure wheels are turned in desired direction.
Page 22
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
5. Turn the key all the way to the START position and hold, activating the choke as necessary, until the
engine is running smoothly. The engine will idle in neutral.
6. Select direction by placing the Forward/Reverse handle in desired position (F = forward or R = reverse).
A buzzer will sound as a warning when the Forward/Reverse handle is in the REVERSE position.
7. Slowly press accelerator pedal. The park brake will release automatically and the vehicle will start to
move. As the accelerator pedal is pressed, speed will increase until full speed is reached. See following
WARNING and CAUTION.
ý WARNING
• Operator must control speed when going downhill.
• Do not shift the vehicle out of forward while going downhill. If you do, you will not be able to
shift into reverse or back into forward until stopped.
• Press the brake pedal as necessary and partially press the accelerator when descending a
hill. With the accelerator pedal partially pressed, the governor will cause the engine to assist
the brakes in controlling downhill speed.
STOPPING THE VEHICLE
ý WARNING
• Driving through water may affect the brakes. After driving through water, check effectiveness
of the brakes by gently pressing the brake pedal. If the vehicle does not slow down at the
normal rate, continue to press the brake pedal until the brakes dry out and normal
performance returns.
ý CAUTION
• When stopped on a hill, use the brake pedal to hold your position. Do not use the accelerator
pedal.
To stop the vehicle, release the accelerator pedal and press the brake pedal with your right foot until the vehi-
cle comes to a complete stop.
PARKING AND LEAVING THE VEHICLE
1. After stopping the vehicle, firmly press the park brake pedal until it locks. This will prevent the vehicle
from rolling.
2. Turn the key switch to the OFF postion and place the Forward/Reverse handle or switch in the NEUTRAL
position. Remove the key when the vehicle is not in use.
• Electric vehicles only: When the Tow/Run switch is in the RUN position (with the Forward/Reverse
switch or key switch in any position), the zero speed detect function will prevent the vehicle from rolling
at more than 1 to 3 mph (1.5 to 4.8 km/h) unless the accelerator is pressed. This prevents the possibil-
ity of a parked vehicle (with the park brake disengaged) rolling away too fast to be overtaken on foot.
• Gasoline vehicles only: Turn the fuel shut-off valve to the closed (OFF) position when the vehicle is
not in use.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Bed Latch
BED LATCH
See General Warnings on page 9.
The bed latch (1) is located under the front corners of the bed (Figure 15, Page 24) and engages automati-
cally when the bed is closed. To lift the bed, pull the bed latch toward the side of the vehicle and lift the bed.
To close the bed gently lower the bed to a closed position. DO NOT drop the bed. See following WARNING.
ý WARNING
• Keep hands and fingers clear of crush area between the bed and the seat back support.
1
Figure 15 Bed Latch
TRANSPORTING ON A TRAILER
ý WARNING
• For use on public roads, the trailer must meet all federal, state, and local requirements such
as taillights, brake lights, etc.
• Do not tow a Husqvarna vehicle behind a passenger vehicle or truck on a public road unless it
is on an approved trailer.
• The vehicle to be towed should be tied securely to the trailer, with the Forward/Reverse
handle or switch in the NEUTRAL position, the key switch in the OFF position, and the park
brake firmly pressed and locked.
• Do not allow people in the trailer or vehicle being towed.
• Avoid sudden starts, sudden stops, and tight turns when towing.
• Avoid stopping on a hill when towing. If you must stop on a hill, avoid sudden starts or rolling
backwards and stopping suddenly. Failure to heed this warning could cause the vehicle to
overturn, possibly resulting in severe personal injury.
• When towing on a trailer, normal road speed of the tow vehicle should be reduced.
• Because of the added length of the trailer, caution should be used when turning a corner.
• Remove the vehicle windshield and secure the seat bottom before transporting on a trailer.
• Gasoline vehicles only: Turn the fuel shut-off valve to the closed (OFF) position (Figure 16,
Page 27).
Page 24
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage – Electric Vehicles
If the vehicle must be transported over long distances or on public highways, it should be transported on an
approved trailer that has the approved load rating of 1200 lb. (544 kg) per vehicle being transported. See fol-
lowing NOTE.
NOTE: A two-car trailer should be rated at 2 x 1200 = 2400 lb. (2 x 544 = 1088 kg).
STORAGE – ELECTRIC VEHICLES
See General Warnings on page 9.
ý WARNING
• Turn the key switch to the OFF position, remove the key, and leave the Forward/Reverse
handle or switch in the NEUTRAL position during storage. This is to prevent unintentionally
starting the vehicle or a fire hazard. Place the Tow/Run switch in the TOW position.
• Do not attempt to charge frozen batteries or batteries with bulged cases. Discard the battery.
Frozen batteries can explode.
ý CAUTION
• Batteries in a low state of charge will freeze at low temperatures.
• To avoid exposing electrical components to moisture and subsequent damage, do not use
any type of pressure washing or steam cleaning equipment to wash the vehicle.
PREPARING THE ELECTRIC VEHICLE FOR EXTENDED STORAGE
1. Fully charge batteries. See Charging Batteries on page 37.
2. Batteries should be clean and free of corrosion. Wash tops and terminals of batteries with a solution of
baking soda and water (1 cup (237 mL) baking soda per 1 gallon (3.8 L) of water). Rinse solution off bat-
teries. Do not allow this solution to enter the batteries. Be sure terminals are tight. Let the terminals dry
and then coat them with Battery Terminal Protector Spray (Husqvarna 603 00 00-03).
3. Store vehicle in a cool, dry place. This will minimize battery self-discharge.
4. Adjust tires to recommended tire pressure. See Vehicle Specifications on page 46.
5. Perform semiannual periodic lubrication. See Periodic Lubrication Schedules on page 32.
6. Thoroughly clean front body, rear body, seats, battery compartment, and underside of vehicle.
7. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.
8. Keep batteries fully charged during storage.
• Leave PowerDrive2 Chargers plugged in during storage. The onboard computer will automatically acti-
vate the charger when necessary. If charger cannot remain plugged in, or AC power will not be avail-
able during extended storage, disconnect the batteries for storage (Figure 2, Page 11). See following
CAUTION.
CAUTION
• Be sure to check the vehicle and charger monthly to ensure the charger is operating correctly
during storage.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage – Gasoline Vehicles
RETURNING THE STORED ELECTRIC VEHICLE TO SERVICE
1. If necessary, connect batteries and tighten terminals to 110 in-lb (12.4 N·m).
2. Fully charge batteries.
3. Adjust tires to recommended tire pressure. See Vehicle Specifications on page 46.
4. Perform the Pre-Operation and Daily Safety Checklist on page 19.
STORAGE – GASOLINE VEHICLES
See General Warnings on page 9.
ý DANGER
• Do not attempt to drain gasoline when the engine is hot or while it is running.
• Be sure to clean up any spilled gasoline before operating the vehicle.
• Store gasoline in an approved gasoline container only. Store in a well-ventilated area away
from sparks, open flames, heaters, or heat sources.
• Keep gasoline out of reach of children.
• Do not siphon gasoline from the vehicle.
ý WARNING
• Only trained technicians should service or repair the vehicle or battery charger. Anyone doing
even simple repairs or service should have knowledge and experience in electrical and
mechanical repair. The appropriate instructions must be used when performing maintenance,
service, or accessory installation.
• Turn the key switch to the OFF position, remove the key, and leave the Forward/Reverse
handle in the NEUTRAL position during storage. This is to prevent unintentionally starting the
vehicle or a fire hazard.
• Turn the fuel shut-off valve to the closed (OFF) position (Figure 16).
ý CAUTION
• Batteries in a low state of charge will freeze at low temperatures.
PREPARING THE GASOLINE VEHICLE FOR EXTENDED STORAGE
1. Store vehicle in a cool, dry place. This will minimize battery self-discharge. If the battery appears to be
weak, have it charged by a trained technician. Use an automotive-type 12-volt battery charger rated at
10 amps or less.
2. Drain carburetor and seal the fuel tank.
2.1. Place the Forward/Reverse handle in the NEUTRAL position. Turn the fuel shut-off valve to the
closed (OFF) position (Figure 16, Page 27) and run the engine until fuel remaining in the carbu-
retor and fuel lines is depleted and the engine stalls.
2.2. Loosen, but do not remove, the carburetor drain screw and drain fuel remaining in bowl into a small,
clean container, then pour the fuel from the container into vehicle fuel tank. Tighten the carburetor
drain screw.
2.3. Disconnect fuel vent line from fuel tank vent nipple.
Page 26
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage – Gasoline Vehicles
2.4. Plug the fuel tank vent nipple so that it is air tight. We recommend using a slip-on vinyl cap.
3. Disconnect the battery cables, negative (–) cable first.
4. Batteries should be clean and free of corrosion. Wash tops and terminals of batteries with a solution of
baking soda and water (1 cup (237 mL) baking soda per 1 gallon (3.8 L) of water). Rinse solution off bat-
teries. Do not allow this solution to enter the batteries. Be sure terminals are tight. Let the terminals dry
and then coat them with Battery Terminal Protector Spray (Husqvarna 603 00 00-03).
CLOSED (OFF) POSITION
(SELECTOR IS ALIGNED
WITH OFF MARKINGS ON THE SIDES OF VALVE)
OFF
VIEWED FROM SELECTOR
SIDE OF VALVE
OFF
Figure 16 Fuel Shut-off Valve – Closed Position
PARTIALLY CLOSED
POSITION
FULL OPEN (ON)
POSITION
VIEWED FROM SELECTOR
SIDE OF VALVE
VIEWED FROM SELECTOR
SIDE OF VALVE
Figure 17 Fuel Shut-off Valve – Open Position
Figure 18 Fuel Shut-off Valve –
Partially Closed Position
5. To protect the engine, remove spark plug and pour 1/2 ounce (14.2 mL) of SAE 10 weight oil into the
engine through the spark plug hole. Rotate engine crankshaft by hand several times, then install the
spark plug and tighten to 20 ft-lb (27 N·m).
6. Adjust tires to recommended tire pressure. See Vehicle Specifications on page 46.
7. Perform semiannual periodic lubrication. See Periodic Lubrication Schedules on page 32.
8. Thoroughly clean front body, rear body, seats, engine compartment, and underside of vehicle.
9. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
RETURNING THE STORED GASOLINE VEHICLE TO SERVICE
1. Restore fuel system to operation (Figure 32, Page 45).
1.1. Remove plug from fuel tank vent.
1.2. Connect vent tube to fuel tank vent.
2. Connect battery cables, positive (+) cable first, and tighten terminals to 12 ft-lb (16 N·m).
3. Completely open the fuel shut-off valve (Figure 17). Make sure the valve is fully open. A partially closed
fuel shut-off valve (Figure 18) combined with the use of the choke can result in a fouled spark plug and
engine failure.
4. Place the Forward/Reverse handle in the NEUTRAL position. Crank the engine until fuel is pumped into the
carburetor and fuel lines and the engine starts. Turn the engine off. See following NOTE.
NOTE: Due to the oil added to the engine in preparation for storage, engine may smoke excessively for a
short time when it is run for the first time after storage.
5. Adjust tires to recommended tire pressure. See Vehicle Specifications on page 46.
6. Perform the Pre-Operation and Daily Safety Checklist on page 19.
MAINTENANCE
See General Warnings on page 9.
To ensure trouble-free vehicle performance, it is very important to follow an established preventive mainte-
nance program. Regular and consistent vehicle maintenance can prevent vehicle downtime and expensive
repairs that can result from neglect. Use the Pre-Operation and Daily Safety Checklist on page 19 and the fol-
lowing Periodic Service Schedules and Periodic Lubrication Schedules to keep the vehicle in proper working
condition.
Any vehicle not functioning correctly should be removed from use until it is properly repaired. This will prevent
further damage to the vehicle and avoid the possibility of injury due to unsafe conditions.
Contact your local Husqvarna distributor/dealer to perform all repairs and semiannual and annual periodic ser-
vice.
ý WARNING
• If any problems are found during scheduled inspection or service, do not operate the vehicle
until repairs are made. Failure to make necessary repairs could result in fire, property
damage, severe personal injury, or death.
• Only trained technicians should service or repair the vehicle or battery charger. Anyone doing
even simple repairs or service should have knowledge and experience in electrical and
mechanical repair. The appropriate instructions must be used when performing maintenance,
service, or accessory installation.
Electric vehicles:
• Hot! Do not attempt to service hot motor. Attempting to do so could cause severe burns.
• To avoid unintentionally starting the vehicle, disconnect the batteries as shown (Figure 2,
Page 11).
• After disconnecting the batteries, wait 90 seconds for the controller capacitors to discharge.
WARNING CONTINUED ON NEXT PAGE...
Page 28
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedules
ý WARNING
Gasoline vehicles only:
• Moving parts: Do not attempt to service gasoline vehicle while the engine is running.
• Hot! Do not attempt to service hot engine or exhaust system. Failure to heed this warning
could result in severe burns.
• Turn the fuel shut-off valve to the closed (OFF) position (Figure 16, Page 27).
• To avoid unintentionally starting the vehicle, before servicing always disconnect the battery,
negative (–) cable first (Figure 1, Page 11) and disconnect the spark plug wire from the spark plug.
• Frame ground – Do not allow tools or other metal objects to contact frame when
disconnecting batteries or other electrical wiring. Never allow a positive wire to touch the
vehicle frame, engine, or other metal component.
PERIODIC SERVICE SCHEDULES
See General Warnings on page 9.
ý WARNING
• Service, repairs, and adjustments must be made per instructions in the maintenance and
service manual.
NOTE: If the vehicle is constantly subjected to heavy use or severe operating conditions, the preventive
maintenance procedure should be performed more often than recommended in the periodic ser-
vice and lubrication schedules.
Both the Periodic Service Schedule and Periodic Lubrication Schedule must be followed to keep
vehicle in optimum operating condition.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedules
PERIODIC SERVICE SCHEDULE – ELECTRIC VEHICLES
REGULAR INTERVAL
Daily service by owner
SERVICE
Batteries
Charge batteries (after each use only).
Check electrolyte level. Add water if
necessary. See page 35.
Weekly service by owner
Batteries
Batteries
Monthly service by owner
or trained technician
Wash battery tops and clean terminals
with baking soda/water solution.
Check air pressure and adjust if
necessary. See Vehicle Specifications
on page 46.
Tires
Wash battery compartment and underside
of vehicle.
General vehicle
Semiannual service by trained
technician only (or every 50 hours of
operation, whichever comes first)
Check brake shoes; replace if necessary.
See Section 6 – Wheel Brake
Assemblies in the appropriate
maintenance and service manual.
Lubricate brake slides per Lubrication
Schedule. See Section 6 – Wheel Brake
Assemblies in the appropriate
Brake system
maintenance and service manual.
Check brake cables for damage; replace if
necessary.
Electrical wiring and connections
Forward/Reverse switch
Check for tightness and damage.
Check condition of contacts and wire
connections. Make sure connections are
tight.
Semiannual service by trained
technician only (or every 50 hours of
operation, whichever comes first)
continued
Check and adjust as required. See
Section 7 – Steering and Front
Suspension in the appropriate
maintenance and service manual.
Front wheel alignment and camber
Motor controller output regulator (MCOR)
Batteries
Annual service by trained technician
only (or every 100 hours of operation,
whichever comes first)
Check for loose hardware, cracks and
other damage.
If batteries are not performing as
expected, see Section 13 – Batteries in
the appropriate maintenance and service
supplement.
Page 30
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedules
PERIODIC SERVICE SCHEDULE – GASOLINE VEHICLES
REGULAR INTERVAL
SERVICE
Monthly service by owner
or trained technician
Check engine oil level; change if
necessary. See Periodic Lubrication
Schedules on page 32.
Check engine cooling air intake; clean if
necessary. Visually inspect the
unshrouded area around engine exhaust
for grass and debris, and clean if
necessary.
Engine
Check air pressure and adjust as
necessary. See Vehicle Specifications
on page 46.
Tires
Wash engine compartment and underside
of vehicle. Do not wash engine when hot.
General vehicle
Semiannual service by trained
technician only (or every 50 hours of
operation, whichever comes first)
Clean terminals and wash dirt from
casing; check electrolyte level. See
Battery – Gasoline Vehicles on
page 39.
Battery
Check and adjust if necessary. See
Section 7 – Steering and Front
Suspension in the appropriate
maintenance and service manual.
Front wheel alignment and camber
Electrical wiring and connections
Check for tightness and damage.
Check brake shoes; replace if necessary.
Lubricate brake slides. See Periodic
Lubrication Schedules on page 32.
Brake system
Check brake cables for damage; replace if
necessary.
Annual service by trained technician
only (or every 100 hours of operation,
whichever comes first)
Check for leaks around gaskets, fill plugs,
etc.
Engine
Inspect, clean and regap spark plug;
replace if necessary.
Annual service by trained technician
only (or every 100 hours of operation,
whichever comes first) continued
Check air filter element; clean or replace if
necessary.
Engine air intake system
Check clamps for tightness; check hose
for cracks.
Check for loose hardware and tighten if
necessary.
General vehicle
Fuel filters
Two year service by trained technician
only (or every 200 hours of operation,
whichever comes first)
Replace. Dispose of used filters properly.
ý WARNING
• If any problems are found during scheduled inspection or service, do not operate the vehicle
until repairs are made. Failure to make necessary repairs could result in fire, property
damage, severe personal injury, or death.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Lubrication Schedules
PERIODIC LUBRICATION SCHEDULES
PERIODIC LUBRICATION SCHEDULE – ELECTRIC VEHICLES
LUBRICATION
REGULAR INTERVAL
SERVICE
RECOMMENDED LUBRICANT
POINTS
Semiannually by owner or
trained technician (or every
50 hours of operation,
Dry Moly Lube (Husqvarna 603 00 00-
01)
Brake pedal shaft bearings
Brake linkage and pivots
1
2
Dry Moly Lube (Husqvarna 603 00 00-
01)
whichever comes first)
Dry Moly Lube (Husqvarna 603 00 00-
01)
Accelerator pivot rod supports
Charger receptacle
3
4
5
6
WD-40
Dry Moly Lube (Husqvarna 603 00 00-
01)
Brake slides
Front suspension (5 fittings)
Chassis Lube – EP NLGI Grade 2
Annually by trained
technician only (or every
100 hours of operation,
whichever comes first)
22 oz. (0.67 L) SAE 30 WT. API Class
SE, SF, or SG Oil (or higher)
Check/fill transaxle to plug level
7
FLOORBOARD
6
2
5
4
6
3
3
1
2
7
4
1
6
5
6
6
Figure 19 Lubrication Points – Electric Vehicles
Page 32
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Lubrication Schedules
PERIODIC LUBRICATION SCHEDULE – GASOLINE VEHICLES
LUBRICATION
POINTS
REGULAR INTERVAL
SERVICE
RECOMMENDED LUBRICANT
Semiannually by owneror
trained technician (or every
50 hours of operation,
Dry Moly Lube (Husqvarna 603 00 00-
01)
Brake pedal shaft bearings
Brake linkage and pivots
1
2
Dry Moly Lube (Husqvarna 603 00 00-
01)
whichever comes first)
Accelerator push rod pivots,
mounts, and shifter cable pivots
Dry Moly Lube (Husqvarna 603 00 00-
01)
3
4
5
Front suspension (5 fittings)
Brake slides
Chassis Lube (EP NLGI Grade 2)
Dry Moly Lube (Husqvarna 603 00 00-
01)
Annually by trained
27 oz. (0.8 L) 80-90 WT. API Class
GL-3 or 80-90 WT. AGMA Class EP
Gear Lube
technician only (or every
100 hours of operation,
whichever comes first)
Check/fill unitized transaxle to
plug level
6
7
First change 100 hours –
additional change
every 200 hours of
operation, or annually,
whichever comes first.
22 oz. (0.67 L) without filter; 38 oz. (1.12
L) with filter
Change engine oil and oil filter
2
4
5
3
4
1
2
3
7
3
3
1
3
6
4
5
4
4
Figure 20 Lubrication Points – Gasoline Vehicles
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Controller – Electric Vehicles
VEHICLE CONTROLLER – ELECTRIC VEHICLES
The electric vehicle is equipped with a solid state speed controller. In order to properly service and maintain
the solid state controller vehicle, it is necessary to understand the electrical circuitry and the functions of all
components in both systems. Therefore, if any repair or servicing needs to be performed, we recommend that
it be performed by an authorized Husqvarna distributor/dealer using Husqvarna parts.
BATTERIES – ELECTRIC VEHICLES
See General Warnings on page 9.
ý DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and
service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full
face shield and rubber gloves when working on or near batteries..
• Charge batteries in a well-ventilated area only. Batteries emit hydrogen while being charged.
Hydrogen is an explosive gas and must never exceed a level of 2% of the air.
• Battery – Poison! Contains acid! Causes severe burns. Avoid contact with skin, eyes, or
clothing. Antidotes:
- External: Flush with water. Call a physician immediately.
- Internal: Drink large quantities of milk or water followed with milk of magnesia or vegetable
oil. Call a physician immediately.
- Eyes: Flush with water for 15 minutes. Call a physician immediately.
ý WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle or battery charger.
Wear a full face shield and rubber gloves when working on or near batteries.
• Use insulated tools when working near batteries or electrical connections. Use extreme
caution to avoid shorting of components or wiring.
CAUTION
• On all electric vehicles, turn off all accessories before charging batteries.
NOTE: Recycle or dispose of discarded batteries in accordance with local, state, and federal regulations.
The batteries in electric vehicles are 12-volt, deep-cycle batteries, specially built for electric vehicle applica-
tion. Automotive batteries should never be used.
New batteries will not deliver their full capabilities until they have been discharged and recharged 20 to 50
times. To obtain the maximum service life from new batteries, restrict vehicles with new batteries to one hour
of operation between charges for the first two months vehicle is in service. Batteries should be fully charged
before first use of new vehicle, before first use of a vehicle after storage, and before use each day.
Page 34
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries – Electric Vehicles
BATTERY CARE
To keep batteries in good working condition, follow this maintenance program on a regular basis:
1. The batteries should be kept clean and free of corrosion. Wash tops and terminals of batteries with a solu-
tion of baking soda and water (1 cup (237 mL) baking soda per gallon (3.8 L) of water). Rinse solution off
of the batteries. Do not allow this solution to enter the battery. Be sure terminals are tight. Let the terminals
dry and then coat with Battery Terminal Protector Spray (Husqvarna 603 00 00-03). See following NOTE.
NOTE: Dispose of waste water properly.
2. The electrolyte level in the batteries should be checked weekly (Figure 21). Add water only after charg-
ing unless the electrolyte level is below the top of the plates. In this case, add just enough water to cover
the plates, charge and then check the level again. Never charge batteries if plates are exposed above
electrolyte level. For best battery life, add only distilled water. See following NOTE.
NOTE: A battery watering gun or bottle is available at many auto parts dealers.
3. The hold-down straps should be tight enough so that the batteries do not move while the vehicle is in
motion, but not so tight as to crack or buckle the battery case. Tighten hold-down retaining nuts to 40 in-
lb (4.5 N·m). The terminal connections should be clean and tight, and any worn insulation or frayed wires
should be replaced. Tighten battery terminals to 110 in-lb (12.4 N·m). See following CAUTION.
ý CAUTION
• If battery wire terminals are damaged or corroded, they should be replaced or cleaned as
necessary. Failure to do so may cause them to overheat during operation.
4. After use, the batteries should be placed on charge. The batteries should never be left discharged any
longer than absolutely necessary (do not leave discharged overnight).
LEVEL
INDICATOR
BATTERY CAP
PLATES
ELECTROLYTE
LEVEL AT LEAST
1/2 INCH (13 MM)
ABOVE PLATES
OR TO LEVEL
INDICATOR
Figure 21 Electric Battery Electrolyte Level
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Charger – Electric Vehicles
BATTERY CHARGER – ELECTRIC VEHICLES
ý DANGER
• The charging area must be ventilated. Hydrogen level in the air must never exceed 2%. The
total volume of air in the charging area must be changed five times per hour. Exhaust fans
should be located at the highest point of the roof. Contact a local HVAC engineer.
• Do not charge the vehicle batteries with the vehicle covered or enclosed. Any enclosure or
cover should be removed or unzipped and pulled back when batteries are being charged. An
accumulation of hydrogen gas could result in an explosion.
ý WARNING
• Only trained technicians should repair or service the charger. Contact your nearest
Husqvarna distributor/dealer.
• Each charger should have its own dedicated 15 or 20 ampere separately protected (circuit
breaker or fuse) single phase branch circuit, in accordance with all applicable electrical codes
for the location.
• Connect the charger AC supply cord to a properly grounded, three-wire outlet of the proper
voltage and frequency as shown on the charger.
• Do not use an adapter to plug the charger with a three-prong plug into a two-prong outlet.
Improper connection of the equipment-grounding conductor can result in a fire or an
electrical shock.
• An extension cord or electrical outlet must accept a three-prong plug. Extension cord should
be a three-wire No. 12 AWG (American Wire Gauge) or No. 14 SWG (British Standard Wire
Gauge), and be as short as possible. The use of improper extension cord could result in fire
or an electrical shock.
• Do not operate the charger if it has received a sharp blow, was dropped, or otherwise
damaged in any way.
• Have worn, cut, or damaged power cords or wires replaced immediately.
• Do not use near fuels, grain dust, solvents, thinners, or other flammables. Chargers can ignite
flammable materials and vapors.
• Do not expose to rain or any liquid. Keep the charger dry.
• Never push objects of any kind into the charger through cabinet slots. They may touch
dangerous voltage points or cause an electrical short circuit that could result in fire or
electrical shock.
• Do not connect a stationary charger to the receptacle if the charger cord, plug, or the vehicle
receptacle is broken, damaged, or does not make a good electrical connection. Fire or
personal injury can result. Have a qualified technician replace the parts.
• When the charger is on, the charger DC cord may be disconnected from the vehicle receptacle
slowly. Jerking or pulling the DC cord out quickly could cause arcing and burning that could
damage the plug and receptacle and could cause batteries to explode.
• Do not block or cover the charger ventilation slots. The slots provide ventilation and protect
the charger from overheating.
• Do not allow clothing, blankets, or other material to cover the charger.
• Do not allow the charger to operate for more than 30 minutes at 19 or more amperes.
• Install surge arrestors on incoming AC power lines. Surge arrestors will help protect electrical
components in the charger and on the vehicle from all but direct or close lightning strikes.
Page 36
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Charger – Electric Vehicles
NOTE: Because the vehicle’s onboard computer (OBC) has a storage charge feature that automatically
checks and recharges the batteries as necessary every 15 days, the charger can remain plugged
to an electric vehicle throughout the storage period.
Shortly after charging begins, the PowerDrive 2 Charger will shut off in order to run a self-diagnos-
tic program (ammeter will drop to zero). Charging will resume in a few moments (ammeter returns
to previous rate of charge). This will be repeated at one hour and at two hours into the charge
cycle.
Each electric vehicle is supplied with a fully automatic PowerDrive 2 battery charger as standard equipment
(Husqvarna 603 00 20-09). The AC cord to each charger is to be connected to a source capable of supplying
10 amperes minimum per charger.
To reduce the risk of electric shock, the battery charger must be grounded. The charger is equipped with an
AC electric cord having an equipment-grounding conductor and a grounding type plug. The AC plug must be
connected to an appropriate receptacle that is properly installed and grounded in accordance with the
National Electrical Code and all local codes and ordinances. See the owner’s manual supplied with the
charger for specific operating instructions before using the charger.
The use of an extension cord with the charger should be avoided. If an extension cord must be used, use a
three-conductor no. 12 AWG (American Wire Gauge) or no. 14 SWG (British Standard Wire Gauge), heavy-
duty cord with ground, properly wired and in good electrical condition. Keep it as short as possible (no more
than 12 feet (3.7 m)). Place all cords so they will not be stepped on, tripped over, or otherwise subject to dam-
age or stress.
Ensure that the charger ventilation slots are unobstructed and that there is adequate ventilation.
CHARGING BATTERIES
ý WARNING
• Be sure all wire connections at the receptacle and the fuse link are clean and tight.
• Do not rock or bend the plug. To connect the charger plug to the vehicle receptacle, grasp the
plug handle and push the plug straight into the receptacle (Figure 22, Page 38).
• Do not pull on the DC cord (Figure 23, Page 38). Do not twist, rock or bend the plug. To
disconnect the charger plug from the vehicle receptacle, grasp the plug by the handle and pull
the plug straight out of the receptacle.
• Do not connect a charger to the receptacle if the charger cord, plug, or the vehicle receptacle
is broken, damaged in any manner, or does not make a good electrical connection. Fire or
personal injury can result. Have it replaced by a qualified service person immediately.
• Failure to follow these instructions could result in damage to the charger cord, the plug, and
(or) the vehicle receptacle.
• Do not use a charger if:
- The plug is too loose or does not make a good connection.
- The plug and receptacle feel hotter than normal during charge.
- The plug pins or receptacle contacts are bent or corroded.
- The plug, receptacle, or cords are cut, worn, have any exposed wires or are damaged in any
way.
• Using the charger with any of the above symptoms could result in a fire, property damage,
personal injury, or death.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Charger – Electric Vehicles
NOTE: When temperatures fall below 65 °F (18.3 °C), batteries charged in unheated areas should be
placed on charge as soon as possible after use. Batteries are warmest immediately after use, and
cold batteries require more time to fully charge.
Insert the charger DC plug into the vehicle receptacle. The charger will turn on two to ten seconds later
(Figure 22).
When inserting the DC plug, align the raised guide on the plug with the guide slot in the receptacle and push
straight in slowly.
Husqvarna battery chargers interact with the vehicle onboard computer. The computer records the amount of
energy consumed during vehicle use. While the charger is plugged in, the vehicle’s control circuit is locked
out, preventing operation of the vehicle as well as the possibility of consequent damage to the charger and the
vehicle.
Once the lockout is actuated, the charger turns on. The onboard computer then records the amount of energy
being returned to the batteries. When the optimum amount of energy needed to replenish the batteries is
returned, the charger will shut off. The control circuit lockout remains activated until the charger plug is dis-
connected from the vehicle.
Figure 22 Correct Insertion of Charger DC Plug
Figure 23 Incorrect Insertion of Charger DC Plug
Husqvarna electric vehicles are supplied with a PowerDrive 2 battery charger (Husqvarna 603 00 20-09). Use
PowerDrive 2 chargers with this electric vehicle.
As long as the PowerDrive 2 is allowed to shut off by itself, the batteries will be fully charged. Overcharging
and undercharging will normally be prevented.
Batteries should be put on charge even if they have been used for only a short period (10 minutes). The Pow-
erDrive 2 charger is automatic and will turn off when batteries are fully charged. If the charger does not seem
to be operating properly, or if the batteries seem weak, contact your local Husqvarna distributor/dealer.
PLUG AND RECEPTACLE
The charger cord, plug, and receptacle are wear items and should be inspected daily. Visually inspect them
for cracks, loose connections, and frayed wiring; they must be replaced when worn or damaged. If charger
plug or receptacle show signs of corrosion or the plug is difficult to insert or remove, the receptacle contacts
and plug terminals should be cleaned with a good electrical contact cleaner or lightly sprayed with WD-40®
brand spray lubricant. The plug should then be inserted and removed several times to ensure ease of inser-
tion, ease of removal, and good electrical contact. See following NOTE.
NOTE: If the warning tag has been damaged or removed from the DC cord, have it replaced immediately.
Page 38
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery – Gasoline Vehicles
48-VOLT
FUSE LINK
SENSE LEAD
FUSE
N
GER /
N
DA
!
Figure 24 Receptacle Fuse Link
RECEPTACLE FUSE LINK
As an additional feature to protect the batteries and charging circuit from an overload, the electric vehicle is
equipped with a receptacle fuse link (Figure 24) . If the charger does not come on when the vehicle is placed
on charge, visually inspect the fuse link. See following WARNING.
ý WARNING
• If the receptacle fuse link is blown, determine the source of the electrical problem and correct
it before replacing the fuse. Contact your nearest Husqvarna distributor/dealer.
BATTERY – GASOLINE VEHICLES
See General Warnings on page 9.
ý DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and
service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full
face shield and rubber gloves when working on or near batteries.
• Tools, wires, and metal objects can cause sparks when shorted across a battery.
• Follow all instructions carefully when working with batteries.
• Charge battery in a well-ventilated area only.
• Battery – Poison! Contains acid! Causes severe burns. Avoid contact with skin, eyes, or
clothing. Antidotes:
DANGER CONTINUED ON NEXT PAGE...
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery – Gasoline Vehicles
ý DANGER
- External: Flush with water. Call a physician immediately.
- Internal: Drink large quantities of milk or water followed with milk of magnesia or vegetable
oil. Call a physician immediately.
- Eyes: Flush with water for 15 minutes. Call a physician immediately.
ý WARNING
• Do not jump start a dead battery using another battery and jumper cables.
The battery in the Husqvarna gasoline vehicle is a 12-volt, low maintenance battery that requires infrequent
watering (Figure 25).
Any corrosion around the positive (+) or negative (–) terminals should be washed off with a solution of baking
soda and water (1 cup (237 mL) per gallon (3.8 L) of water). Rinse solution off the battery. Do not allow this
solution to enter battery. Be sure terminals are tight (battery terminals should be tightened to 12 ft-lb (16
N·m)). Let the terminals dry and then spray them with Battery Terminal Protector Spray (Husqvarna 603 00
00-03). See preceding WARNING and following CAUTION.
ý CAUTION
• If battery wire terminals are damaged or corroded, they should be replaced or cleaned as
necessary. Failure to do so may cause them to overheat during operation.
BATTERY CAP
LEVEL
PLATES
INDICATOR
ELECTROLYTE
LEVEL AT LEAST
1/2 INCH (13 MM)
ABOVE PLATES
OR TO LEVEL
INDICATOR
Figure 25 Battery – Gasoline Vehicle
Figure 26 Gasoline Battery Electrolyte Level
Be sure battery clamp is properly tightened. Tighten to 12 ft-Ib (16 N·m). A loose battery clamp may allow the
battery to become damaged from vibration or jarring.
If battery appears weak, have it charged by a trained technician. The battery should never be left discharged
any longer than absolutely necessary (do not leave discharged overnight).
Page 40
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil – Gasoline Vehicles
ENGINE OIL – GASOLINE VEHICLES
See General Warnings on page 9.
Even though the low oil warning light on the dash should illuminate if oil level becomes low, engine oil level
should be checked monthly. Vehicle should be on a level surface when checking oil. Do not overfill with oil.
ENGINE OIL LEVEL CHECK
1. Remove the oil level dipstick from the oil filler tube and wipe oil from dipstick (Figure 27). See following
CAUTION.
ý CAUTION
• Do not remove dipstick while engine is running.
2. Check oil by fully inserting the dipstick into the oil filler tube and immediately removing it.
3. If the oil level is at or below the low level mark on the dipstick gauge, add oil until the level is between
low and full levels (safe level).
4. Reinsert dipstick into the oil filler tube.
NOTE: Properly recycle or dispose of used oil in accordance with local, state, and federal regulations.
1
3
Full
Level
Safe
Level
Low
Level
2
Figure 27 Engine Oil Level Check
ENGINE OIL AND FILTER CHANGE
Engine oil and oil filter should be changed after the first 100 hours of operation. After that, they should be
changed every 200 hours of operation or annually, whichever comes first.
1. Turn the key switch to the OFF position, then remove the key. Place the Forward/Reverse handle in the
neutral POSITION. Chock the front wheels.
2. Access the engine compartment. See following WARNING.
ý WARNING
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle.
If the vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is
raised. Do not close the bed until all persons are clear of cargo bed area. Keep hands clear of
all crush areas. Do not drop cargo bed; lower gently and keep entire body clear. Failure to
heed this warning could result in severe personal injury or death.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil – Gasoline Vehicles
3. Disconnect the battery cables, negative (–) cable first . See WARNING “To avoid unintentionally start-
ing...” on page10.
4. Position a pan designed for oil changes under the front drain plug (Figure 28).
5. Use a 14 mm socket or box end (do not use an open end) wrench to remove the drain plug, turning it
counterclockwise, and allow the engine oil to drain into the pan. See following WARNING.
ý WARNING
• Do not attempt to change engine oil when the engine is hot or even warm. Engine oil can
cause skin burns.
• Weat safety glasses or approved eye protection when servicing the vehicle. Wear rubber
gloves when handling oil drain plug, oil filter, and oil drain pan.
6. Clean the oil drain plug threads with solvent to remove oil and oil residue. Make sure that the compres-
sion washer remains on the drain plug.
7. Use a 14 mm socket or box end (do not use an open end) wrench and replace the front oil drain plug,
turning it clockwise, and tighten to 18 ft-lb (24.4 N·m).
OIL FILTER
DRAIN PAN
DRAIN PLUG
Figure 28 Engine Oil Drain Plug and Pan
8. Relocate the oil drain pan to a position under the engine oil filter (Figure 28, Page 42).
9. Remove the engine oil filter, turning it counterclockwise, allowing the residual oil in the filter port and filter
to drain into the oil drain pan (Figure 29, Page 43). See following NOTE.
NOTE: An oil drip guard can be used to prevent excess oil from dripping into the engine base place. Use
an empty quart (one litter) container and but the bottom off at an angle, then slide the open area of
the container up and under the oil filter prior to removing. Position the port of the plastic container
so oil will be directed into the oil pan (Figure 28). Or, make a drip guard by folding a piece of card-
board, thin metal, or plastic under the oil filter forming a channel to direct the filter port oil into the
drain pan.
Dispose of used oil according to the environmental laws and regulations for your area.
Page 42
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil – Gasoline Vehicles
10. Use a clean rag and wipe the oil filter mounting bracket surface clean where the oil filter gasket seats.
11. Install a new oil filter (Husqvarna 603 00 00-06) onto the engine oil filter port. Apply a light coat of white
lithium NLGI Number 2 grease (Dow Corning® BR2-Plus or equivalent) or new engine oil to the rubber
seal around the outside surface of the filter before attaching it to the oil filter port (Figure 30). This will
help seal the filter to the oil mounting bracket.
NOTE: Use only Husqvarna oil filters (603 00 00-06) designed for this engine.
12. Tighten the oil filter by hand until tight. Do not use a band wrench or channel lock plier to tighten.
13. Remove the dipstick and add engine oil into the dipstick port. Use a funnel or pour spout to direct the oil
into the dipstick port. With filter change, the engine requires 38 ounces (1.12 liters) of oil per change.
Refer to oil viscosity guidelines for selection of oil grade (Figure 31). Replace the dipstick.
14. Connect the battery cables, positive (+) cable first, and tighten terminals to 12 ft-lb (16 N·m). Coat ter-
minals with Battery Terminal Protector Spray (Husqvarna 603 00 00-03).
15. Lower the cargo bed. See WARNING “For vehicles with cargo beds...” on page 10.
16. With the Forward/Reverse handle in the NEUTRAL position, start and run the engine for a few minutes.
Observe both the drain plug and the oil filter from under the vehicle and watch for oil leaks. If leaks
appear, begin with step 1 and repeat the appropriate step for either or both items to correct the problem.
17. Remove the dip stick and check the engine oil as a final step. Replace the dip stick.
USED OIL FILTER
OIL DRIP GUARD
DRAIN PAN
Figure 29 Remove Engine Oil Filter
Figure 30 Coat Oil Filter Rubber Seal
OIL VISCOSITY
Choose the viscosity according to the temperature as indicated by the oil viscosity chart (Figure 31). See fol-
lowing NOTE.
NOTE: Using multi-grade oils (5W-20, 10W-30, and 10W-40) will increase oil consumption. Check oil level
more frequently when using them.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Fueling Instructions – Gasoline Vehicles
°
°
°
°
°
°
°
0 C
20
C
-20 C -10 C
10 C
30 C 40
SAE 40
SAE 30
SAE 10W-30/SAE 10W-40
SAE 5W-20
°
°
°
°
°
86 F
°
°
104 F
32 F 50 F
-4 F
14 F
68 F
Figure 31 Oil Viscosity Chart
FUELING INSTRUCTIONS – GASOLINE VEHICLES
See General Warnings on page 9.
ý DANGER
• Turn the key switch to the OFF position before fueling.
• Do not pour gasoline into the fuel tank when the engine is hot or while it is running.
• To avoid electric arc caused by static electricity, the fuel storage/pumping device must be
grounded. If the pump is not grounded, the vehicle must be grounded to the pump before and
during the fueling operation.
• If the vehicle has an all-weather enclosure installed, be sure the fuel tank is properly vented as
shown (Figure 32).
• To avoid the possibility of fire, clean up any spilled gasoline before operating the vehicle.
ý CAUTION
• To allow for expansion, do not fill higher than one inch from the top of the fuel tank. Avoid fuel
spillage.
NOTE: Whenever possible, avoid using oxygenated fuels and fuels that are blended with alcohol. Vehicles
to be stored for extended periods should be prepared for storage as instructed. See Preparing the
Gasoline Vehicle for Extended Storage on page 26.
1. Turn the key switch to the OFF position.
2. Lift and remove seat bottom.
3. The fuel tank is located on passenger side of vehicle. Remove fuel cap and fill the fuel tank with fresh
unleaded gasoline only. See preceding CAUTION.
4. Replace fuel cap on tank. Ensure cap is tightened securely.
5. Replace seat bottom.
Page 44
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Vehicle
VENT
SHUT-OFF
VALVE
VENT TUBES
Figure 32 Fuel Tank
CLEANING THE VEHICLE
Husqvarna vehicles are equipped with ABS front bodies and TPO for rear bodies. Use only commercially
available automotive cleaners with a sponge or soft cloth for normal cleaning. A garden hose at normal resi-
dential water pressure is adequate.
Husqvarna does not recommend any type of pressure washing or steam cleaning. Such a process (especially
if the vehicle has the rear body removed) will expose electrical components to moisture. Moisture entering
electrical components can result in water damage and subsequent component failure.
Use non-abrasive wax products. Battery acid, fertilizers, tars, asphalt, creosote, paint, or chewing gum should
be removed immediately to prevent possible stains.
The seats of the vehicle will last longer with proper cleaning. Use a solution of 10% liquid soap and warm
water applied with a soft cloth. For imbedded dirt, a soft bristle brush may be used. For heavy soiling, difficult
stains or scratches, blemishes, or other body damage, see Section 4 of the appropriate maintenance and ser-
vice manual.
NOTE: Dispose of waste water properly.
ACCESSORIES
There is a complete line of accessory equipment available from Husqvarna and our dealers/distributors. You
can obtain the name and phone number of your closest Husqvarna contact by visiting our web site at
Care should be taken that these accessories are properly installed by trained technicians, and that they are
used in the manner for which they were designed.
SUBSEQUENT OWNER REGISTRATION
In the event a vehicle is bought as a used vehicle, we strongly urge the new owner to register the vehicle with
Husqvarna. This will enable us to contact you if the need arises. Please send your name, address, and serial
number of the vehicle to Husqvarna, 7349 Statesville Rd., Charlotte, NC 28269, Attention: Vehicle Registra-
tion.
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Specifications
VEHICLE SPECIFICATIONS
Electric
HUV4210-
EXP
Gasoline
Gasoline
Electric
HUV4210-E
HUV4210-
SPECIFICATIONS
HUV4210-G
GXP
POWER SOURCE
Drive motor: Direct drive, 48 volts DC, shunt-wound, 3.2 hp
•
Engine: 4-cycle OHV, 286 cc, 9.0 hp rated, single-cylinder, air-cooled, with pressure
•
•
•
lubrication system
Engine: 4-cycle OHV, 351cc, 11.0 hp rated, single-cylinder, air-cooled, with pressure
lubrication system
Fuel system: Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse
fuel pump
Governor: Automatic ground-speed sensing, internally geared in unitized transaxle
Ignition: Transistor electronic ignition with electronic RPM limiter
•
•
Transaxle: Double reduction helical gear with 12.3:1 direct drive axle
•
•
Unitized transaxle: Fully synchronized forward and reverse with neutral and reduced
speed reverse (11.8:1 forward, 17.1:1 reverse)
•
•
Torque converter: Automatic, variable-speed, dry type
Electrical system: 48 volts DC, reduced speed reverse
Electrical system: 12 volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute
reserve capacity and 35-amp charging capacity
•
Batteries: High capacity, deep cycle, Trojan PowerDrive 12-volt, 117 min. capacity
Charger: Automatic, 48-volt; UL and CSA listed
•
•
STEERING/SUSPENSION/BRAKES
Steering: Self-adjusting rack and pinion
•
•
Suspension: Front and rear tapered mono-leaf springs with dual hydraulic shocks
Brakes: Dual rear wheel self-adjusting brakes with cast iron drums and single brake
pedal with automatic-release park brake
•
BODY/CHASSIS
Frame/Chassis: Twin I-Beam welded aluminum
Front body: ABS
•
•
•
•
Rear body: TPO
Tires: 20 x 10.0 – 8 tubeless, 4 ply rated
DIMENSIONS/WEIGHT
Overall length
100.2 inches (2545 mm)
45 inches (1143 mm)
46.9 inches (1191 mm)
66.5 inches (1689 mm)
5.5 inches (140 mm)
34.5 in (88 cm)
Overall width
Overall height (at steering wheel)
Wheelbase
Ground clearance
Front wheel tread
Rear wheel tread
38.5 in. (98 cm)
Weight (without batteries)
Weight (dry, without battery)
Forward speed
544 lb. (246 kg)
669 lb. (303 kg)
17 mph (27 km)
Vehicle Specifications continued on next page...
Page 46
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Specifications
Electric
HUV4210-
EXP
Gasoline
Gasoline
HUV4210-G
GXP
Electric
HUV4210-E
HUV4210-
SPECIFICATIONS
Standard seating capacity
LIQUID CAPACITIES
Transaxle
2
22 oz. (0.67 L)
Engine crankcase (without filter)
Engine crankcase (with filter)
Unitized transaxle
Fuel tank
32 oz. (0.95 L)
38 oz. (1.12 L)
27 oz. (0.8 L)
7 gallons (26.5 L)
TIRE PRESSURE
Front and rear
18-20 psi (1.24-1.38 Bars)
18-20 psi (1.24-1.38 Bars)
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
®
HUSQVARNA LIMITED TWO YEAR WARRANTY FOR
2005 TRANSPORTATION AND UTILITY VEHICLES
1. WARRANTY:
HUSQVARNA, INC., ("HUSQVARNA") hereby warrants to the Original Retail Purchaser that its new 2005 Model
Transportation and Utility Vehicles purchased from HUSQVARNA or an authorized dealer shall be free from defects in
material and workmanship under normal use and service as a transportation or utility vehicle for the periods stated below,
subject to the provisions, limitations and exclusions contained in this limited warranty.
LIMITED TWO YEAR / 2000 HOUR WARRANTY (personal use application): The engine assembly, unitized transaxle
assembly (gasoline vehicle), motor, transaxle assembly (electric vehicle), main frame assembly, hydraulic dump kit, Custom
Cab assembly and doors, and Driving Range Protective Enclosure are warranted with respect to parts and labor against
defects in material and workmanship for a period of two years or 2000 hours of operation, whichever first occurs, from the
date of purchase.
LIMITED ONE YEAR / 1000 HOUR WARRANTY (commercial use applications): All remaining components of the vehicle
not specified otherwise, the Portable Refreshment Center, and all other original equipment options and accessories
supplied by HUSQVARNA are warranted with respect to parts and labor against defects in material and workmanship for a
period of one year or 1000 hours of operation, whichever first occurs, from the date of purchase.
This limited warranty covers material, workmanship and repair labor cost as to those items specifically listed above for the
periods specified. Such repair labor shall be performed only by HUSQVARNA, its authorized dealers, or a service agency
approved by HUSQVARNA.
IF THE WARRANTY REGISTRATION FORM IS NOT COMPLETED AND RETURNED TO HUSQVARNA AT THE TIME
OF THE ORIGINAL RETAIL SALE, PURCHASER MUST PROVIDE PROOF OF DATE OF PURCHASE WITH ANY
WARRANTY CLAIM.
2. EXCLUSIONS:
Excluded from any HUSQVARNA warranty are all fuses, filters, decals (except safety decals), spark plugs, light bulbs,
lubricants, trim pieces, seats, routine wear items such as the charger plug and receptacle, brake shoes, belts, brushes,
bushings, engine mounts, mats and pads, maintenance adjustments, cosmetic deterioration, and items which deteriorate or
fail due to exposure or ordinary wear and tear. Batteries, battery charger, onboard computer, and solid-state speed
controller are covered under separate HUSQVARNA warranties. Also excluded from any HUSQVARNA warranty is
damage to a vehicle or component resulting from a cause other than a defect including unreasonable or unintended strain
or use, improper installation of accessories, installation of parts or accessories that are not original equipment, overloading,
accident, alteration, abuse or neglect.
Transportation expenses for warranty services are also excluded from this warranty.
3. VOIDING OF WARRANTY:
THIS AND ANY OTHER WARRANTY SHALL BE VOID IF THE VEHICLE IS ABUSED OR USED IN AN UNINTENDED
MANNER OR SHOWS INDICATIONS THAT IT HAS BEEN ALTERED IN ANY WAY, INCLUDING, BUT NOT LIMITED TO,
MODIFICATION OF THE SPEED GOVERNOR, BRAKING SYSTEM, STEERING, TRANSAXLE, OR OTHER
OPERATING SYSTEMS OF THE VEHICLE TO CAUSE IT TO PERFORM OUTSIDE HUSQVARNA SPECIFICATIONS.
THE WARRANTY IS LIKEWISE VOID IF THE VEHICLE INVOLVED SHOWS INDICATIONS THAT REASONABLE OR
NECESSARY MAINTENANCE AS OUTLINED IN THE OWNER'S MANUAL AND MAINTENANCE AND SERVICE
MANUAL WAS NOT PERFORMED AT THE TIME AND IN THE MANNER SPECIFIED IN SUCH MANUALS.
4. SOLE REMEDY:
HUSQVARNA's liability under this limited warranty, or in any action whether based upon warranty, contract, negligence,
strict product liability or otherwise, shall be the repair or replacement, at HUSQVARNA's option, of the vehicle or component
thereof that HUSQVARNA deems to be defective. Replacement shall mean furnishing, during the applicable limited
warranty period, a new vehicle or factory-reconditioned vehicle or component thereof that is identical or reasonably
equivalent to the warranted product or component at no cost to the purchaser. Repair shall mean remedying a defect in the
vehicle or component thereof at no cost to the purchaser during the applicable limited warranty period. If HUSQVARNA
elects to repair the vehicle, it may provide factory-reconditioned parts or components. All parts and components replaced
under warranty shall become the property of HUSQVARNA.
5. HOW TO MAKE A WARRANTY CLAIM:
To make a warranty claim under this limited warranty, you must present the vehicle or defective component to an authorized
HUSQVARNA dealer.
Page 48
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6. DISCLAIMER:
THIS LIMITED WARRANTY IS EXCLUSIVE. HUSQVARNA MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE WHICH EXCEED THE OBLIGATIONS OR TIME LIMITS STATED IN THIS WARRANTY ARE HEREBY
DISCLAIMED BY HUSQVARNA AND EXCLUDED FROM THIS WARRANTY. THE PURCHASER AND HUSQVARNA
EXPRESSLY AGREE THAT THE REMEDY OF THE REPLACEMENT OR REPAIR OF THE DEFECTIVE VEHICLE OR
COMPONENT THEREOF IS THE SOLE REMEDY OF THE PURCHASER. HUSQVARNA MAKES NO OTHER
REPRESENTATION OR WARRANTY OF ANY KIND, AND NO REPRESENTATIVE, EMPLOYEE, OR DEALER OF
HUSQVARNA HAS THE AUTHORITY TO MAKE OR IMPLY ANY REPRESENTATION, PROMISE OR AGREEMENT,
WHICH IN ANY WAY VARIES THE TERMS OF THIS WARRANTY.
7. NO CONSEQUENTIAL DAMAGES:
IN NO EVENT SHALL HUSQVARNA BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, LOSS RELATED TO PROPERTY OTHER THAN THE VEHICLE, LOSS OF USE,
LOSS OF TIME, INCONVENIENCE, OR ANY OTHER ECONOMIC LOSS.
Some states allow neither limitation on the duration of an implied warranty nor exclusions or limitation of incidental or
consequential damages. Therefore, the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
8. INFORMATION:
For further information contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT MARKETING
MANAGER - AUTOMOWER, 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269 OR CALL 1-800-448-7543.
9. WARNING:
Any modification or alteration of any vehicle beyond factory specifications, including those that affect the weight distribution,
stability, or speed of the vehicle, can cause serious personal injury or death.
®
HUSQVARNA LIMITED FOUR YEAR WARRANTY FOR 2005
®
DEEP CYCLE 12-VOLT BATTERIES
HUSVARNA, INC, ("HUSQVARNA") hereby warrants to the original retail purchaser that the Deep Cycle 12 volt Battery
installed in its new electric vehicle equipped with the IQ System™ purchased from Husqvarna or an authorized distributor or
dealer will be free from defects in material and workmanship and will provide performance (60 minute discharge capacity)
for a period of four years or 800 rounds, whichever first occurs, from the date of purchase subject to the terms and
conditions contained herein.
This limited warranty only covers defects in material and workmanship for a period of four years or 16,000 energy units from
date of purchase. The terms of this four-year or 16,000 energy units warranty shall be as follows:
Free replacement with respect to parts and labor within four years or 16,000 energy units as recorded by the Onboard
Computer, whichever first occurs, from the date of purchase.
The vehicle should be returned to an authorized Husqvarna distributor or dealer with evidence of proof of purchase date.
Husqvarna reserves the right to test and recharge any battery returned for adjustment, and to verify number of energy units
by accessing information contained in the IQ System Onboard Computer.
LIMITED WARRANTY EXCLUSIONS
THE PROVISIONS OF THIS LIMITED WARRANTY SHALL NOT APPLY TO FAILURE DUE TO:
1)Abuse such as overcharging, undercharging, improper fluid levels, loose wiring, or rusted or corroded hardware;
2)Lack of proper maintenance as outlined in the electric vehicle owner's manual;
3)Damages caused by improper installation of the battery;
4)Neglect, breakage, freezing, fire, explosion, wreckage, the addition of any chemical, or the operation of the battery in an
uncharged condition (below half charge 1.200 specific gravity);
5)A battery damaged by a defective charger.
Without limiting the generality of the foregoing in any way, and as part of its limited warranty exclusion, Husqvarna does not
warrant that its PowerDrive battery is suitable for use in any application other than in its products. As in the use of any
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
battery, a prudent owner will read and study the charger owner's manual, the electric vehicle owner's manual, the operator
instructions, and the battery warning labels; and will exercise due care in working on or around batteries.
Transportation expenses for warranty services are also excluded from this warranty.
WARRANTY LIMITATIONS
HUSQVARNA's liability under this limited warranty shall be to replace a defective battery. Replacement shall be furnishing
a new or used battery with sufficient life to complete the remainder of the warranty term, which is identical or reasonably
equivalent to the warranted product at no cost to the purchaser during the four-year or 16,000 Energy Unit limited warranty
period, whichever first occurs. All batteries, which are replaced under this limited warranty, become the property of
Husqvarna.
THIS LIMITED WARRANTY IS EXCLUSIVE. HUSQVARNA MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE WHICH EXCEED THE OBLIGATIONS OR TIME LIMITS STATED IN THIS WARRANTY ARE
HEREBY DISCLAIMED BY HUSQVARNA AND EXCLUDED FROM THIS WARRANTY. THE PURCHASER AND
HUSQVANRA EXPRESSLY AGREE THAT THE REPLACEMENT OR REPAIR OF THE DEFECTIVE VEHICLE OR
COMPONENT THEREOF IS THE SOLE REMEDY OF THE PURCHASER. HUSQVARNA MAKES NO OTHER
REPRESENTATION OR WARRANTY OF ANY KIND AND NO REPRESENTATIVE, EMPLOYEE, DISTRIBUTOR OR
DEALER OF HUSQVARNA HAS THE AUTHORITY TO MAKE OR IMPLY ANY REPRESENTATION, PROMISE OR
AGREEMENT, WHICH IN ANY WAY VARIES THE TERMS OF THIS WARRANTY.
This battery is intended to be used by persons with training and experience with batteries and only in Husqvarna electric
vehicles. Any other use renders the Limited Warranties expressed herein and all implied warranties null and void and same
are hereby excluded.
ALSO EXCLUDED FROM THIS LIMITED WARRANTY ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL
DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OR REVENUE, LOSS OF TIME, INCONVENIENCE OR
ANY OTHER ECONOMIC LOSS.
Damage not resulting from a defect in material or workmanship or that occurs due to abuse or neglect (including failure to
provide reasonable and necessary maintenance), accident or alteration is excluded from this limited warranty.
Some states allow neither limitation on the duration of an implied warranty nor exclusions or limitations of incidental or
consequential damages. Therefore, the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
For further information contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT MARKETING
MANAGER - AUTOMOWER, 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269 OR CALL 1-800-448-7543.
®
HUSQVARNA LIMITED FOUR YEAR WARRANTY FOR 2005
®
POWERDRIVE BATTERY CHARGERS
HUSQVARNA INC., ("HUSQVARNA ") hereby warrants to the original retail purchaser that its new PowerDrive Chargers
purchased from HUSQVARNA or an authorized distributor or dealer will be free from defects in material and workmanship
under normal use and service for a period of four years from the date of purchase, subject to the terms, provisions,
limitations, and exclusions contained herein.
The limited warranty with respect to parts and labor only covers defects in material and workmanship for a period of four
years from the date of purchase. Such repair labor shall be performed only by HUSQVARNA or by an authorized distributor
or dealer. Purchaser shall be responsible for all freight costs to and from HUSQVARNA's facility.
LIMITED WARRANTY EXCLUSIONS
THE PROVISIONS OF THIS LIMITED WARRANTY SHALL NOT APPLY TO FAILURE DUE TO:
1)Lack of normal maintenance services such as preventive maintenance checks and tightening loose wire connections;
2)Semiconductor parts such as diodes and fuses which are vulnerable to electrical overloads (including lightning) beyond
the control of HUSQVARNA;
3)Charger DC cord set with plug, which is a wear item and subject to user abuse.
Page 50
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Any warranty service, which includes labor during the first year, must be performed by HUSQVARNA or by an authorized
distributor or dealer. For repairs made by qualified technicians other than HUSQVARNA's factory technicians or an
authorized distributor or dealer, HUSQVARNA will provide only the replacement parts or components.
The PowerDrive Chargers are intended to be used by persons with knowledge of the chargers and proper charging
practices and only on HUSQVARNA PowerDrive System 48™, PowerDrive Plus® and IQ System™ vehicles. Any other
use renders the Limited Warranties expressed herein and any implied warranties null and void and same are hereby
excluded.
Without limiting the generality of the foregoing in any way, and as part of its limited warranty exclusion, HUSQVARNA does
not warrant that the PowerDrive Charger is suitable for use in any application other than its PowerDrive System 48,
PowerDrive Plus and IQ System products. As in the use of any electrical device, a prudent owner will read and study the
charger owner's manual, the electric vehicle owner's manual, the operator instructions, and the battery warning labels; and
will exercise due care in working on or around electrical devices.
Transportation expenses for warranty services are also excluded from this warranty.
WARRANTY LIMITATIONS
HUSQVARNA's liability under this limited warranty, or in any action whether based upon warranty, contract, negligence,
strict product liability or otherwise, shall be the replacement or repair of a charger or component thereof that HUSQVARNA
deems to be defective. Replacement shall mean furnishing, during the applicable limited warranty period, a new charger or
component thereof that is identical or reasonably equivalent to the warranted product or defective component at no cost to
the purchaser. Repair shall mean remedying a defect in the charger or component thereof at no cost to the purchaser
during the applicable limited warranty period. If HUSQVARNA elects to repair the charger, it may provide factory-
reconditioned parts or components. All parts and components replaced under warranty shall become the property of
HUSQVARNA
THIS LIMITED WARRANTY IS EXCLUSIVE. HUSQVARNA MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE WHICH EXCEED THE OBLIGATIONS OR TIME LIMITS STATED IN THIS WARRANTY ARE
HEREBY DISCLAIMED BY HUSQVARNA AND EXCLUDED FROM THIS WARRANTY. THE PURCHASER AND
HUSQVARNA EXPRESSLY AGREE THAT THE REPLACEMENT OR REPAIR OF THE DEFECTIVE VEHICLE OR
COMPONENT THEREOF IS THE SOLE REMEDY OF THE PURCHASER. HUSQVARNA MAKES NO OTHER
REPRESENTATION OR WARRANTY OF ANY KIND AND NO REPRESENTATIVE, EMPLOYEE, DISTRIBUTOR OR
DEALER OF CLUB CAR HAS THE AUTHORITY TO MAKE OR IMPLY ANY REPRESENTATION, PROMISE OR
AGREEMENT, WHICH IN ANY WAY VARIES THE TERMS OF THIS WARRANTY.
IN NO EVENT SHALL HUSQVARNA BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, LOSS RELATED TO PROPERTY OTHER THAN THE BATTERY CHARGER,
LOSS OF USE, LOSS OF TIME, INCONVENIENCE, OR ANY OTHER ECONOMIC LOSS.
Damage not resulting from a defect that occurs due to unreasonable use, abuse or neglect (including failure to provide
reasonable or necessary maintenance), accident or alteration is excluded from the limited warranty.
Some states allow neither limitation on the duration of an implied warranty nor exclusions or limitations of incidental or
consequential damages. Therefore, the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
For further information contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT MARKETING
MANAGER - AUTOMOWER, 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269 OR CALL 1-800-448-7543.
®
HUSQVARNA LIMITED FOUR YEAR WARRANTY FOR 2005 ONBOARD
COMPUTERS AND SOLID STATE SPEED CONTROLLERS
HUSQVARNA, INC., ("HUSQVARNA") hereby warrants to the original retail purchaser that the new Onboard Computer and
the Solid State Speed Controller, hereinafter called "Computer" and "Controller" respectively, installed in its new electric
vehicle equipped with the PowerDrive® System 48™, PowerDrive Plus® or IQ System™ purchased from HUSQVARNA or
an authorized distributor or dealer will be free from defects in material and workmanship for a period of four years or 16,000
energy units, whichever first occurs, from the date of purchase subject to the terms and conditions contained herein.
This limited warranty only covers defects in material and workmanship for a period of four years or 16,000 energy units from
date of purchase. The terms of this four-year or 16,000 energy units limited warranty shall be as follows:
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Free replacement with respect to parts and labor within four years or 16,000 energy units as recorded by the Computer,
whichever first occurs, from date of purchase.
The vehicle should be returned to an authorized HUSQVARNA distributor or dealer with evidence of proof of purchase date.
HUSQVARNA reserves the right to test any Computer returned for warranty and to verify number of energy units by
accessing information contained in the Computer.
LIMITED WARRANTY EXCLUSIONS
THE PROVISIONS OF THIS LIMITED WARRANTY SHALL NOT APPLY TO FAILURE DUE TO:
1)Abuse or neglect, such as improper battery fluid levels, loose wiring, or rusted or corroded hardware;
2)Lack of proper maintenance as outlined in the electric vehicle owner's manual;
3)Damages caused by improper installation of the Computer or Controller;
4)Vehicles charged by systems other than the Husqvarna PowerDrive Charger.
Without limiting the generality of the foregoing in any way, and as part of its limited warranty exclusion, HUSQVARNA does
not warrant that the Computer or Controller is suitable for use in any application other than its PowerDrive System 48,
PowerDrive Plus and IQ System products. As in the use of any battery operated device, a prudent owner will read and
study the charger owner's manual, the electric vehicle owner's manual, the operator instructions, and the battery warning
labels; and will exercise due care in working on or around batteries.
Transportation expenses for warranty services are also excluded from this warranty.
WARRANTY LIMITATIONS:
HUSQVARNA's liability under this limited warranty shall be to replace a defective Computer or Controller. Replacement
shall be furnishing a new or reconditioned Computer or Controller, which is identical or reasonably equivalent to the
warranted product at no cost to the purchaser during the four-year or 16,000 energy units limited warranty period whichever
first occurs, except for transportation expenses. All parts and components replaced under this limited warranty become the
property of HUSQVARNA.
THIS LIMITED WARRANTY IS EXCLUSIVE. HUSQVANRA MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE WHICH EXCEED THE OBLIGATIONS OR TIME LIMITS STATED IN THIS WARRANTY ARE
HEREBY DISCLAIMED BY HUSQVARNA AND EXCLUDED FROM THIS WARRANTY. THE PURCHASER AND
HUSQVARNA EXPRESSLY AGREE THAT THE REPLACEMENT OR REPAIR OF THE DEFECTIVE VEHICLE OR
COMPONENT THEREOF IS THE SOLE REMEDY OF THE PURCHASER. HUSQVARNA MAKES NO OTHER
REPRESENTATION OR WARRANTY OF ANY KIND AND NO REPRESENTATIVE, EMPLOYEE, DISTRIBUTOR OR
DEALER OF HUSQVARNA HAS THE AUTHORITY TO MAKE OR IMPLY ANY REPRESENTATION, PROMISE OR
AGREEMENT, WHICH IN ANY WAY VARIES THE TERMS OF THIS WARRANTY.
This computer or controller is intended to be used only in HUSQVARNA PowerDrive System 48, PowerDrive Plus and IQ
System electric vehicles. Any other use renders the Limited Warranties expressed herein and all implied warranties null and
void and same are hereby excluded.
ALSO EXCLUDED FROM THIS LIMITED WARRANTY ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL
DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OR REVENUE, LOSS OF TIME, INCONVENIENCE OR
ANY OTHER ECONOMIC LOSS.
Damage not resulting from a defect in material or workmanship or that occurs due to abuse or neglect (including failure to
provide reasonable and necessary maintenance), accident or alteration is excluded from this limited warranty.
Some states allow neither limitation on the duration of an implied warranty nor exclusions or limitations of incidental or
consequential damages. Therefore, the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
For further information contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT MARKETING
MANAGER - AUTOMOWER, 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269 OR CALL 1-800-448-7543.
Page 52
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
Your new Husqvarna, Inc. ("HUSQVARNA") vehicle engine complies with both the U.S. EPA and State of California emission regulations. Husqvarna provides the same emission
warranty coverage for engines sold in all 50 states.
YOUR WARRANTY RIGHTS AND OBLIGATIONS:
The California Air Resources Board ("CARB") and HUSQVARNA are pleased to explain the emission control system warranty on your 2005 vehicle engine. In California, new small off-
road engines must be designed, built and equipped to meet the State's stringent anti-smog standards. HUSQVARNA must warrant the emission control system on the vehicle engine for
the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your small off-road engine.
Your emission control system may include parts such as the carburetor or fuel-injection system, the ignition system, and catalytic converter. Also included may be hoses, belts,
connectors and other emission-related assemblies.
Where a warrantable condition exists, HUSQVARNA will repair your vehicle engine at no cost to you including diagnosis, parts and labor.
MANUFACTURER'S WARRANTY COVERAGE:
The 1995 and later small off-road engines are warranted for two years. If any emission-related part on your engine is defective, the part will be repaired or replaced by HUSQVARNA.
OWNER'S WARRANTY RESPONSIBILITIES:
- As the vehicle engine owner, you are responsible for the performance of the required maintenance listed in your owner's manual. HUSQVARNA recommends that you retain all receipts
covering maintenance on your vehicle engine, but Husqvarna cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled
maintenance.
- As the vehicle engine owner, you should however be aware that HUSQVARNA may deny you warranty coverage if vehicle engine or a part has failed due to abuse, neglect, improper
maintenance or unapproved modifications.
- You are responsible for presenting vehicle engine to a HUSQVARNA distribution center as soon as a problem exists. The warranty repairs should be completed in a reasonable amount
of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you should contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT
MARKETING MANAGER – AUTOMOWER, 7349 STATEVEILLE ROAD, CHARLOTTE, NC 28269.
HUSQVARNA EXPLANATION OF EMISSION CONTROL WARRANTY:
1. WARRANTY:
HUSQVARNA vehicle engines manufactured after January 1, 1995 and sold in the State of California, and U.S. EPA certified engines manufactured on or after September 1, 1996 and
sold in all of the United States, are covered by this warranty for a period of two years from the date of purchase.
2. COVERAGE:
Warranty repairs will be made without charge for diagnosis, parts, or labor. Such repair labor shall be performed only by HUSQVARNA, its authorized dealers, or a service agency
approved by HUSQVARNA. All defective parts replaced under this warranty become the property of HUSQVARNA. Normal maintenance items, such as spark plugs and filter, that are on
the list of warranted parts (below) are warranted up to their first scheduled replacement
HUSQVARNA is also liable for damages to other engine components caused by a failure of any warranted part during the warranty period.
Only HUSQVARNA approved replacement parts may be used in the performance of any warranty repairs and must be provided without charge to the owner. The use of replacement
parts not equivalent to the original parts may impair the effectiveness of the engine emission control system. If such a replacement part is used in the repair or maintenance of the engine,
and an authorized HUSQVARNA dealer determines it is defective or causes a failure of a warranted, part, your claim for repair of the engine may be denied. If the part in question is not
related to the reason the engine required repair, the claim will not be denied.
* Covered up to the first required replacement only. See the Periodic Service Schedule in the owner’s manual.
Emission-related parts will vary between vehicles; therefore, certain vehicles may not include all of the listed parts or may include equivalent parts.
3. EXCLUSIONS:
Excluded from this warranty is damage to a vehicle or component resulting from a cause other than a defect including unreasonable or unintended strain or use, improper installation of
accessories, installation of parts or accessories that are not original equipment, overloading, accident, alteration, abuse or neglect. This warranty covers only those failures resulting from
defects in material or workmanship.
Transportation expenses for warranty services are also excluded from this warranty.
4. VOIDING OF WARRANTY:
THIS AND ANY OTHER WARRANTY SHALL BE VOID IF THE VEHICLE IS ABUSED OR USED IN AN UNINTENDED MANNER OR SHOWS INDICATIONS THAT IT HAS BEEN
ALTERED IN ANY WAY, INCLUDING, BUT NOT LIMITED TO, MODIFICATION OF THE SPEED GOVERNOR, BRAKING SYSTEM, STEERING, TRANSAXLE, OR OTHER
OPERATING SYSTEMS OF THE VEHICLE TO CAUSE IT TO PERFORM OUTSIDE HUSQVARNA SPECIFICATIONS. THE WARRANTY IS LIKEWISE VOID IF THE VEHICLE
INVOLVED SHOWS INDICATIONS THAT REASONABLE OR NECESSARY MAINTENANCE AS OUTLINED IN THE OWNER’S MANUAL AND MAINTENANCE AND SERVICE
MANUAL WAS NOT PERFORMED AT THE TIME AND IN THE MANNER SPECIFIED IN SUCH MANUALS.
5. NO CONSEQUENTIAL DAMAGES:
In no event shall Husqvarna be liable for any incidental or consequential damages including, but not limited to, loss related to property other than the vehicle, loss of use, loss of time,
inconvenience, or any other economic loss. This warranty is applicable only where the California or U.S. EPA emission control system warranty regulation is in effect.
6. HOW TO MAKE A WARRANTY CLAIM:
To make a warranty claim under this limited warranty, you must present the vehicle or defective component to an authorized HUSQVARNA dealer or send the defective component,
freight prepaid, to to WARRANTY SERVICES, HUSQVARNA, INC., Husqvarna FOREST & GARDEN, PRODUCT MARKETING MANAGER – AUTOMOWER, 7349 STATESVILLE
ROAD, CHARLOTTE, NC 28269.
IF THE WARRANTY REGISTRATION FORM IS NOT COMPLETED AND RETURNED TO HUSQVARNA AT THE TIME OF THE ORIGINAL RETAIL SALE, PURCHASER MUST
PROVIDE PROOF OF DATE OF PURCHASE WITH ANY WARRANTY CLAIM
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Publication Part Number 603 00 20-02
Edition Code 0505B0705A
Husqvarna Forest and Garden
7349 Statesville Rd.
Charlotte, NC 28269
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|