Hunter Fan Thermostat 42710 01 User Manual

Set & $ave  
Programmable  
Thermostat  
Installation and  
Operation Manual  
Model  
44360  
Form# 42710-01  
20091204  
©2009 Hunter Fan Co.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Information .............................................................................. 5  
Tools........................................................................................................ 6  
Uninstalling the Existing Unit................................................................... 7  
Installing the Thermostat ....................................................................... 12  
Installing the Wall Plate.................................................................. 12  
Connecting the Wires..................................................................... 16  
Attaching the Thermostat ............................................................... 18  
Settings.................................................................................................. 22  
Methods of Operation............................................................................ 26  
Manual Operation / Override.......................................................... 28  
Default Programs ........................................................................... 32  
Creating Custom Progams............................................................. 34  
Icons and Features................................................................................ 38  
Important Features................................................................................ 52  
Troubleshooting..................................................................................... 53  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set & Save  
Programmable Thermostat  
Model 44360  
Congratulations!  
Thank you for choosing a Hunter programmable thermostat. Your  
new Hunter thermostat will provide years of reliable service and  
year-round energy savings.  
Please read this manual before beginning installation and save this  
booklet for complete operation instructions.  
The Hunter Technical Support Group is available from 7 am to 7 pm Monday  
- Friday and 8:00 to 5:00 Saturdays CST. They may be reached toll-free at  
1-888-830-1326.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPOrTAnT InFOrMATIOn  
This thermostat is designed to work on the following  
heating and cooling systems:  
Gas – Standing Pilot  
Gas – Electronic Ignition  
Gas – Fired Boilers  
Gas – Millivolt Systems  
Oil – Fired Boilers  
Oil – Fired Furnace  
Electric Furnace  
Electric Air Conditioning  
Single-Stage Heat Pumps  
This thermostat is not designed for multi-stage heat pump systems  
or 110/220 V baseboard heating systems.  
If you are unsure what kind of heating and cooling system you  
have, please contact a qualified HVAC Technician for assistance.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOOlS  
This thermostat includes two #8 slotted screws and two wall  
anchors for mounting.  
To install your new thermostat, you will need the following supplies:  
Flat-head screwdriver  
.............................................................................................  
Small Phillips-head screwdriver  
.............................................................................................  
Hammer  
.............................................................................................  
Electric drill and 3/16” bit  
.............................................................................................  
Two 1.5 Volt (AA) size alkaline batteries  
.............................................................................................  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
w
nOTICE! Do not disconnect the wires from the existing  
thermostat before reading these instructions. The wires  
must be labeled prior to removal to ensure proper  
reconnection.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
UnInSTAllInG THE ExISTInG UnIT  
1. Turn the system power OFF from the existing thermostat. Turn  
the power to the HVAC system OFF at the main power panel or  
at the furnace.  
(Failure to turn off the power to the existing thermostat before  
removal could damage your system.)  
2. remove the existing thermostat cover to access the wires from  
the wall.  
(Some thermostats may have multiple covers, screws or other  
locking devices that must be removed or disengaged. See page  
8 for common examples.)  
3. locate, but do not disconnect the wires.  
(If wires are not visible, they may be connected to the back  
of the wall plate. Some models may have doors that open to  
expose the wires and mounting screws.)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIrE lABElS  
if your existing thermostat  
is marked...  
label the wire with  
this sticker:  
R H  
RH / R / VR / 4  
24 Volt  
RH  
R C  
RC / VC  
24 Volt cool  
RC  
Y / 0  
air conditioning  
compressor  
Y / C* / M / O  
Y/0  
W / B  
W / H / B  
G / F  
heating  
fan  
W/B  
G
G
heat pump compressor  
Y 1  
Y1  
Y1  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UnInSTAllInG THE ExISTInG UnIT, COnT.  
4. Using the provided stickers, label each wire according to the  
Wire labels chart. (If the terminals are not labeled,  
contact a qualified HVAC technician.)  
Note: Wire colors do not always comply with standards, so  
wire color should be ignored. refer to the existing terminal  
designation for proper identification.  
*If wires marked Y & C are both present, C may be a  
Common wire and should not be used. If you have a wire  
marked C, do not connect it to any terminal. This wire is used only  
for non-battery powered thermostats.  
5. Do not let the wires slip back into the wall during disconnection.  
You may want to secure the wires to the wall as you disconnect  
them. After all wires are labeled, disconnect each wire and  
remove the existing wall plate.  
(Any unused wires should be capped with an approved electrical connector,  
such as electrical tape.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InSTAllInG THE THErMOSTAT  
InSTAllInG THE WAll PlATE  
1. remove the wall plate from the new thermostat by pressing the  
release tab on the bottom of the thermostat.  
2. Position the new wall plate on the wall and pull the labeled wires  
through the opening.  
3. If the existing holes do not match those on the Hunter wall plate,  
or if there are no existing holes, visually level the wall plate and  
mark the wall for two holes.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InSTAllInG THE THErMOSTAT, COnT.  
4. remove the wall plate and drill two 3/16” holes where marked.  
5. Tap the plastic anchors into the holes until they are flush with the  
wall. (Do not use plastic anchors if you encounter a stud in the  
wall.)  
6. reposition the wall plate on the wall, pulling the wires through  
the opening. Insert the mounting screws through the wall plate  
and into the anchors. Verify that the wall plate is visually level  
and securely tighten both screws.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RC RH  
G
Y/0  
W/B Y1  
Terminal Shield  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InSTAllInG THE THErMOSTAT, COnT.  
COnnECTInG THE WIrES  
1. loosen, but do not remove, the terminal screws.  
Jumper  
note: A jumper wire has been provided, connecting the  
rC and rH terminals for systems that do not provide both  
an rH and rC wire. If you have both an rH and rC wire,  
remove this jumper. If you do not have both an rH and rC  
wire, leave the jumper in place.  
G
RC RH  
2. Match and connect the wires from the wall to the  
terminals as shown. Wires should be inserted behind the black  
terminal shields. Tighten each screw after the connection has  
been made.  
(The ends of any extra wires should be individually wrapped in electrical  
tape and carefully pushed back into the wall.)  
3. Push any excess wire length back into the wall to prevent  
interference.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thermostat  
Cover  
T
AM  
ENABLE  
RECOVERY  
DISABLE  
4
HEAT  
System  
Switch  
HP  
STD  
Fan  
SYSTEM TYPE  
Switch  
HG  
HE  
FAN OPTION  
Y1  
W/B Y/O RH RC  
G
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InSTAllInG THE THErMOSTAT, COnT.  
ATTACHInG THE THErMOSTAT  
lift the thermostat cover and set the SYSTEM switch to OFF and  
the FAN switch to AUTO.  
1. Fan option - locate the HE/HG switch on the back of the  
thermostat. Set the switch to HG (default) for gas furnace and oil  
burners. Set the switch to HE for electric furnaces. (The switch  
has no effect when the system is set to cooling mode.)  
2. recovery - locate the AUTO REcOvERY switch on the back of the  
thermostat. If you wish to use the Auto recovery feature, verify  
that the switch is in the EnABlE position. If you do not wish  
to use this feature, simply change the switch to the DISABlE  
position. See pages 44-45 for more information.  
3. System type - locate the SYSTEM TYpE switch on the  
back of the thermostat. Select either STD (Standard) or HP  
(Heat Pump) to match your system.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
front cover  
Tab  
2
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InSTAllInG THE THErMOSTAT, COnT.  
4. Place the top of the thermostat over the two tabs on the wall  
plate. Press the thermostat onto the wall plate and press to snap  
the bottom tab into place.  
note: Do not force the thermostat onto the wall plate, as the terminal  
pins may be damaged. If the thermostat does not snap into place  
properly, the unit may not work.  
5. lift the front cover and insert two AA alkaline batteries.  
6. restore power at the electrical panel or furnace.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
reset  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTInGS  
o
The default setting of the thermostat is Fahrenheit (F ).  
(nOTICE: CHAnGInG THIS SETTInG WIll rESET THE  
THErMOSTAT TO FACTOrY DEFAUlT PrOGrAMS.)  
o
To change to Celsius (C ):  
1. Press and hold the Up button.  
2. Use a paperclip to press the RESET button.  
3. Continue to press the Up button, but release the reset button  
when the lCD turns on.  
To reset the unit to F, press only the RESET button.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM  
PM  
program  
day/time  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTInGS, COnT.  
The default for this thermostat setting is in a 12 hour format. You  
can change the format to 24 hour format by pressing DAY/TiME and  
then pROGRAM.  
The AM/PM indicator will be off when the thermostat is in 24 hour  
mode.  
Setting day and time:  
1. Press DAY/TiME. (AM/PM and current hour will flash)  
Press Up or DOwN to adjust the setting.  
2. Press DAY/TiME again to adjust the minute setting.  
Press Up or DOwN to adjust the setting.  
3. Press DAY/TiME again to adjust the day of the week.  
Press Up or DOwN to adjust the setting.  
4. Press DAY/TiME to return to the normal display.  
Press Up or DOwN to adjust the setting.  
You may also press Hold/return at any time to return to the normal  
display.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
AM  
4
HEAT  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn  
This thermostat gives you the ability to program up to 4 custom  
temperature settings per day or utilize pre-programmed settings.  
For manual operation / override instructions, see pages 28-35.  
To utilize the pre-programmed settings, see pages 36-37.  
To create custom programs, see pages 38-41.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TH  
AM  
2
HEAT  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn (COnT.)  
1. MAnUAl OPErATIOn / OVErrIDE  
Many people prefer to operate their thermostats manually, adjusting  
settings as needed. You can either temporarily override the settings  
for the current program, or permanently override all settings and  
adjust temperatures manually.  
If you want to only override the current program:  
1. Press and hold Up or DOwN for one second to enter Manual  
Override mode. (Release the button when the display flashes.)  
2. Press the Up or DOwN buttons to adjust the temperature setting  
as desired.  
The system will revert back to the program at the next scheduled  
program time.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOLD  
system  
heat  
cool  
off  
hold  
/return  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn  
2. PErMAnEnT OVErrIDE  
If you want to permanently override all settings and adjust the  
thermostat manually:  
1. Press HOlD/RETURN until the Hold icon appears.  
2. Press and hold Up or DOwN for one second to enter Manual  
Override mode. (Release the button when the display flashes.)  
3. Press the Up or DOwN buttons to adjust the temperature setting  
as desired.  
4. Press and release HOlD/RETURN to return to the normal display.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME TODAY  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn  
3. HOME TODAY OVErrIDE  
Overrides the programmed settings during a time you would not  
normally be home.  
Pressing Home Today during the first or second programs of the  
day will override the programs until the fourth program begins.  
The thermostat will then go back into normal mode.  
Pressing Home Today during the third program of the day will  
override the programs until the first program of the next day.  
Press HOME TODAY to enter or exit the program override. The  
"Home Today" message will flash on the screen and the program  
number will disappear. The highest or lowest schedule of the  
program will appear for you to adjust. Press Up or DOwN to  
adjust the temperature.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Temp  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn  
4. VACATIOn OVErrIDE  
Overrides the programmed settings for a set amount of days.  
The first number in Vacation Override mode indicates the number  
of days you wish to hold the temperature for, and the temperature  
beside it indicates the temperate you want to be held during  
those days.The first day you set the Vacation Override feature will  
be counted as day one in your number of days. The thermostat  
will resume your normal programs during program four, the last  
day of the override.  
Press and hold the hold button until your time changes to a  
number with a temperature beside it. Use day/time to adjust how  
many days to override the temperature, and the up/down arrows  
to set the temperature it should hold. During Vacation Override  
the VACA will cycle with the time.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEFAUlT PrOGrAMS CHArT  
10 pm  
Program 4  
o
o
Heat : 60 F (16 C)  
o
o
Cool : 82 F (28 C)  
Program 3  
o
o
Heat : 68 F (20 C)  
o
o
Cool : 78 F (26 C)  
6 am  
Program 1  
o
o
Heat : 68 F (20 C)  
o
o
Cool : 78 F (26 C)  
4 pm  
8 am  
Program 2  
o
o
Heat : 60 F (16 C)  
o
o
Cool : 85 F (29 C)  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. DEFAUlT PrOGrAMS  
By using the pre-programmed settings, this thermostat can save  
you money by optimizing energy usage in heating and cooling.  
refer to the Default Programs Chart for detailed information about  
the pre-programmed settings.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM  
PM  
system  
heat  
program  
off  
cool  
hold  
/return  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn  
6. CrEATInG CUSTOM PrOGrAMS  
Program times can be set in 10 minute increments.  
o
o
Program temperature can be set in increments of 1 F (1 C).  
After 15 seconds of inactivity during programming, the  
thermostat will return to normal Display mode.  
When setting each program time, note the AM/PM indicator.  
Press HOlD/RETURN at any time to exit Program mode and save  
your settings.  
During normal operation, if no button is pressed for 5 seconds,  
the unit will return to the normal Display mode.  
1. Slide the SYSTEM SwiTcH to HEAT or cOOl to program the  
corresponding system.  
2. Press pROGRAM to enter Program mode. (The lCD will begin to  
flash)  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M
1
T
W
TH  
F
SA SU  
AM  
PM  
2
3
4
HEAT COOL  
system  
heat  
program  
off  
cool  
hold  
/return  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
METHODS OF OPErATIOn  
3. Press Up or DOwN to change the hour. Press pROGRAM to save  
the hour and adjust the minute setting.  
4. Press Up or DOwN to change the minute. Press pROGRAM to save  
the minute setting and adjust the temperature.  
5. Press Up or DOwN to change the temperature. Press pROGRAM  
again to move to the next program number.  
(There are 4 programs per day. If you do not wish to assign 4  
programs per day, set up to 4, keeping in mind that the total  
program time must equal 24 hours.)  
6. repeat steps 2-5 for the remaining days.  
7. To review your program settings, press pROGRAM repeatedly to  
review the customized programs.  
(You can make changes at any time when the thermostat is in  
Program mode.)  
8. Slide the SYSTEM SElEcTOR SwiTcH to the opposite position and  
repeat steps 2-5.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FILTER  
filter  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICOnS AnD FEATUrES  
®
1. InDIGlO night-light - will backlight the display for easy viewing  
in the dark. Press any button to illuminate the light.  
(If no button is pressed after 5 seconds, the backlight will turn off.)  
note: If the thermostat shows a low Battery Warning, the backlight  
will not operate. Follow the instructions on pages 42-43 to change  
batteries.  
2. Filter change indicator - will flash after 400 hours of system use  
as a reminder to check or change your filter. Press and hold the  
FilTER button for 3 seconds after changing the filter to reset the  
filter timer.  
(Pressing the Filter button for less than 3 seconds will cause the Filter  
change indicator icon to appear. The filter timer will not be affected  
unless the button is held for more than 3 seconds.)  
note: Clearing the Filter counter will also clear the Energy counter.  
See pages 50-51 for more information.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hr  
Usage Today  
Min  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICOnS AnD FEATUrES, COnT.  
3. Energy – calculates energy usage. Press to display the total  
operation time for heat and air conditioning for today, yesterday,  
last week, or Total. Monitoring energy usage allows you to  
optimize energy savings.  
Press ENERGY to cycle through Today, Yesterday, This Week, and  
Total (up to 999 hours and 59 minutes).  
Press and hold ENERGY until the display blinks to reset the  
counter.  
note: Clearing the Energy monitor counter will also clear the Filter  
counter.  
4. Daylight savings time - allows for an easy transition during  
daylight savings time.  
Press DAY/TiME, then Up or DOwN to enter daylight savings time  
mode and adjust as needed.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HEAT COOL  
system  
heat  
off  
cool  
reset  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICOnS AnD FEATUrES, COnT.  
5. Span setting mode – allows you to adjust the system On/OFF  
cycle rate. The default setting is 2 (the system cycles On or OFF  
o
o
when the temperature is within 1 F (0.5 C) above and below  
the set temperature.) The span setting can be adjusted if your  
system is cycling too fast or too slowly.  
Press and hold both the Up and DOwN buttons until the word  
SPAn appears. Use the Up or DOwN button to adjust the span  
setting.  
(Up will increase your cycle time by allowing the system to run longer;  
Down will decrease your cycle time by causing the system to run for a  
shorter length of time.)  
Span settings remain the same for HEAT and cOOl system  
settings. When batteries are installed, or the unit is RESET, the  
span cycle will revert to 2.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M
PM  
4
COOL  
STAGE 1  
STAGE 2  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICOnS AnD FEATUrES, COnT.  
6. low battery warning – indicates two stages of battery power  
shortage.  
When the batteries are detected as weak, the icon will flash until  
new AA alkaline batteries are installed (Stage 1). If the batteries  
become too weak for normal operation, the thermostat enters  
the second battery power shortage mode (Stage 2). When  
insufficient battery power is left, the battery icon will flash alone  
on the display and your system will turn off. The display will be  
blank when no battery power is left. The system will remain off  
until new batteries are installed.  
(Your programs and time settings will be lost if the batteries are  
not replaced within one minute.)  
The thermostat will resume normal operation after new batteries  
are installed.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hold  
/return  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICOnS AnD FEATUrES, COnT.  
7. Auto recovery – allows heating and cooling systems to gradually  
recover from an energy-saving setpoint temperature to a comfort  
setpoint temperature. Auto recovery calculates the time needed  
to adjust the temperature to the next program setting. When  
the thermostat is in Auto Recovery mode, the display will flash  
alternating messages of rECO and the time. Auto recovery can  
be disabled by sliding the recovery switch on the back of the  
circuit board to the disable position.  
(Auto recovery will not operate if Permanent or Temporary holds are on.)  
Press HOlD/RETURN during the Auto recovery process to manually  
cancel the recovery.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICOnS AnD FEATUrES, COnT.  
8. Error mode – indicates an unexpected battery problem. The  
screen will flash an ERR message and shut your system off until  
the batteries are replaced with new AA alkaline batteries. You  
must reset and reprogram the thermostat after replacing the  
batteries if the thermostat has entered Error mode.  
9. Auto cut off – automatically turns the system off if the  
o
o
o
o
temperature rises above 95 F (35 C) or drops below 40 F (4  
C).  
(If your HVAC system has malfunctioned, the system will no longer  
respond to thermostat controls and the Auto cut off will have no effect.)  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPOrTAnT FEATUrES  
1. Temperature range  
o
o
o
o
99  
F
30  
F
o
(0 C)  
45  
F
95  
F
o
(35 C)  
o
(37 C)  
o
(7 C)  
Out of Range  
Out of Range  
Program Range  
Display Range  
"LO"  
"HI"  
o
o
<
>
99  
30  
F
F
2. Compressor Protection  
After the system stops running in cooling mode, there  
will be a 3.5 minute delay before it can be restarted to  
prevent compressor damage due to rapid cycling.  
3. resetting the unit  
To restore the thermostat to the original factory  
settings, press the reset button with a paperclip.  
(This will erase any user-programmed settings.)  
reset  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TrOUBlESHOOTInG  
1. My display will not come on.  
1 a. Check batteries and battery connections.  
1 b. reset the thermostat.  
.............................................................................................  
2. The auto fan feature will not operate properly.  
2 a. remove the thermostat from the wall plate and set the  
HG/HE switch to the correct position.  
.............................................................................................  
3. My display is erratic.  
3 a. reset the thermostat and reprogram your settings.  
.............................................................................................  
4. The program will not change at my desired setting.  
4 a. Check that the time is set properly to AM or PM.  
4 b. Make sure the thermostat is not in permanent override  
mode.  
4 c. Check that the day setting is correct.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TrOUBlESHOOTInG  
5. My heating or cooling will not turn on or off.  
5 a. Check the Heat/Cool function switch to ensure it is set to  
the desired position.  
5 b. Wait. There may be as much as a 4-minute delay before  
the system turns on or off to protect the compressor.  
5 c. Check the circuit breakers and switches to ensure there is  
power to the system.  
5 d. replace the batteries.  
5 e. If applicable, make sure the furnace blower door is closed  
properly.  
5 f. If your system has 4 wires, ensure the jumper wire is  
installed between the rC and rH terminals.  
5 g. Check your system for proper wiring.  
.............................................................................................  
6. The display will come on, but it will not stay illuminated.  
6 a. replace batteries.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TrOUBlESHOOTInG  
7. My system continues to operate when the thermostat is in the off  
position.  
7 a. replace unit.  
7 b. Check your system for proper wiring.  
.............................................................................................  
8. The lCD screen permanently reads HI, lO, or Err.  
8 a. replace unit.  
.............................................................................................  
9. How do I just operate my thermostat manually?  
9 a. Manual operation instructions are on pages 28-31.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Is there help on the web?  
.............................................................................................  
Can’t I just call someone?  
Sure. The Hunter Technical Support Group is available from 7 am to  
7 pm CST M-F and 8 am to 5 pm Saturday. They may be reached  
toll-free at 1-888-830-1326.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Haier Washer XPB58 113S User Manual
Harbor Freight Tools Digital Camera 66550 User Manual
Hasbro Motorized Toy Car 83453 ASST User Manual
Hotpoint Cooktop CH60GCIK User Manual
Hotpoint Refrigerator RF175B User Manual
HP Hewlett Packard Digital Camera R930 User Manual
Hunter Fan Air Cleaner 30846 User Manual
Hypertec Carrying Case 6701HY User Manual
Hyundai Automobile PDF Ebook Library User Manual
IBM Personal Computer PC 300GL User Manual