Humminbird Fish Finder 531438 1

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:51 PM Page 1

737 GPS

Chartplotter Operations Manual

531438-1_A

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:51 PM Page 4

Table of Contents

Navigation X-Press™ Menu (optional-purchase GPS receiver, navigation views only)

Key Functions

Waypoint [Name] (Only with an active cursor on a waypoint) .................................................................... 48

Cursor To Waypoint (Chart or Combo view only) .............................................................................................. 49

Save Current Track ...................................................................................................................................................... 49

Clear Current Track ...................................................................................................................................................... 49

Save Current Route (only when navigating)........................................................................................................ 50

Skip Next Waypoint (only when navigating) ...................................................................................................... 50

Cancel Navigation (only when navigating).......................................................................................................... 50

Remove Target (only if Target is Active) ................................................................................................................ 51

Remove Grid (only if Grid is Active).......................................................................................................................... 51

Sonar Window (Combo view only) .......................................................................................................................... 51

Waypoint [Name] (Most recently-created waypoint) ...................................................................................... 52

POWER/LIGHT Key ................................................................................................................................................ 29

VIEW Key .................................................................................................................................................................. 30

INFO Key .................................................................................................................................................................... 30

MENU Key ................................................................................................................................................................ 30

4-WAY Cursor Control Key .................................................................................................................................... 31

MARK Key.................................................................................................................................................................... 31

GOTO Key.................................................................................................................................................................... 32

ZOOM (+/-) Key ........................................................................................................................................................ 32

EXIT Key ...................................................................................................................................................................... 32

Accessory Bus

Powering Up the Unit

The Menu System

Start-Up Options Menu

Screen Snapshot X-Press™ Menu (Screen Snapshot view only)

Delete Image (with optional-purchase MMC/SD Card only) .......................................................................... 53

Delete All Images (with optional-purchase MMC/SD Card only).................................................................. 53

Sonar Menu Tab .................................................................................................. 54

Normal Operation.................................................................................................................................................... 35

Simulator .................................................................................................................................................................. 35

System Status .......................................................................................................................................................... 36

Self Test ...................................................................................................................................................................... 36

Accessory Test .......................................................................................................................................................... 37

GPS Diagnostic View (with optional-purchase GPS Receiver only) ............................................................ 37

PC Connect (with PC Connect Cable only).......................................................................................................... 38

Beam Select .............................................................................................................................................................. 55

Fish ID+^TM.................................................................................................................................................................... 56

Fish ID Sensitivity .................................................................................................................................................... 57

Real Time Sonar (RTS®) Window ........................................................................................................................ 57

Zoom Width ....................................................................................................................................................................58

83 kHz Sensitivity (Advanced).............................................................................................................................. 58

455 kHz Balance (Advanced) ................................................................................................................................ 59

WideSide® Sensitivity (Advanced, with WideSide® transducer only)........................................................ 59

Depth Lines (Advanced) ........................................................................................................................................ 60

Surface Clutter (Advanced) .................................................................................................................................... 61

Noise Filter (Advanced) .......................................................................................................................................... 62

Max Depth (Advanced) .......................................................................................................................................... 62

Water Type (Advanced) .......................................................................................................................................... 63

Transducer Select .................................................................................................................................................... 63

Sonar X-Press™ Menu

Side (WideSide® transducer: WideSide® view only) .......................................................................................... 40

Sensitivity ...................................................................................................................................................................... 41

Upper Range (Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher views only)...................... 42

Lower Range .................................................................................................................................................................. 43

Side Beam Range (WideSide® transducer: WideSide® view only) ................................................................ 44

Chart Speed .................................................................................................................................................................. 44

Bottom View .................................................................................................................................................................. 45

Bottom Range (Sonar Zoom view only when Bottom Lock is On) ................................................................ 45

Bottom Lock (Sonar Zoom view only) .................................................................................................................... 46

Cancel Navigation (only when navigating) ........................................................................................................ 46

Navigation Menu Tab (with optional-purchase GPS receiver)

Current Track ..................................................................................................................................................................65

Saved Tracks ....................................................................................................................................................................65

Waypoints ...................................................................................................................................................................... 66

Routes .............................................................................................................................................................................. 67

Chart Orientation.......................................................................................................................................................... 67

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:51 PM Page 6

Table of Contents

North Reference............................................................................................................................................................ 68

Grid Rotation.................................................................................................................................................................. 68

Trackpoint Interval ...................................................................................................................................................... 69

Track Min Distance (Advanced)................................................................................................................................ 69

Map Datum (Advanced) ............................................................................................................................................ 70

Course Projection Line ................................................................................................................................................ 69

Export All Nav Data (Advanced) .............................................................................................................................. 70

Delete All Nav Data (Advanced) .............................................................................................................................. 70

Temp Offset (Advanced) ........................................................................................................................................ 85

Speed Calibration (Advanced, with Temp/Speed only) ................................................................................ 85

Local Time Zone (Advanced, with optional-purchase GPS receiver).............................................................. 86

Daylight Saving Time (Advanced, with optional-purchase GPS receiver) ................................................ 86

Position Format (Advanced, with optional-purchase GPS receiver).............................................................. 86

Time Format (Advanced, International and optional-purchase GPS receiver only) ................................ 87

Date Format (Advanced, International and optional-purchase GPS receiver only).................................. 87

NMEA Output (Advanced) .................................................................................................................................... 88

Sonar .......................................................................................................................................................................... 88

Chart Menu Tab (with optional-purchase GPS receiver)

Views Menu Tab

Chart Detail Level.......................................................................................................................................................... 72

Map Borders .................................................................................................................................................................. 72

Lat/Lon Grid .................................................................................................................................................................. 73

Spot Soundings ............................................................................................................................................................ 73

Set Simulation Position (Advanced) ...................................................................................................................... 73

Set Map Offset (Advanced)........................................................................................................................................ 74

Clear Map Offset (Advanced) .................................................................................................................................... 74

Accessories Menu Tab

Using Screen Snapshot .............................................................................................................................................. 90

Troubleshooting

700 Series™ Doesn’t Power Up .......................................................................................................................... 92

700 Series™ Defaults to Simulator with a Transducer Attached ............................................................ 92

Display Problems .................................................................................................................................................... 93

Finding the Cause of Noise .................................................................................................................................. 94

Alarms Menu Tab

Depth Alarm.............................................................................................................................................................. 76

Fish ID Alarm ............................................................................................................................................................ 76

Low Battery Alarm .................................................................................................................................................. 77

Temp Alarm................................................................................................................................................................ 77

Off Course Alarm (optional-purchase GPS receiver)........................................................................................ 78

Arrival Alarm (optional-purchase GPS receiver) .............................................................................................. 78

Drift Alarm (optional-purchase GPS receiver) .................................................................................................. 79

Alarm Tone ................................................................................................................................................................ 79

700 Series™ Fishing System Accessories

Specifications

Glossary

Sonar Terms .............................................................................................................................................................. 97

GPS & Navigation Terms .................................................................................................................................... 105

Contact Humminbird®

110

Setup Menu Tab

Units - Depth.............................................................................................................................................................. 81

Units - Temp (International only) ........................................................................................................................ 81

Units - Distance (with Temp/Speed or optional-purchase GPS receiver) .................................................. 81

Units - Speed (with Temp/Speed or optional-purchase GPS receiver)........................................................ 82

User Mode ................................................................................................................................................................ 82

Language (International only) ............................................................................................................................ 82

Triplog Reset (with Temp/Speed or optional-purchase GPS receiver) ........................................................ 83

Restore Defaults ...................................................................................................................................................... 83

Select Readouts (Advanced, Sonar view only) ................................................................................................ 84

Depth Offset (Advanced) ...................................................................................................................................... 84

NOTE: Entries in this Table of Contents which list (International only) are only available on products

sold outside of the US by our authorized International Distributors. To obtain a list of authorized

International Distributors, please visit our website at www.humminbird.com or contact our

Customer Resource Center at 1-800-633-1468 to locate the distributor nearest you.

NOTE: Entries in this Table of Contents which list (with Temp/Speed or GPS Receiver), or (with PC

Connect Cable Only) or (with optional-purchase WideSide® transducer) or (with optional-purchase

MMC/SD card) require the purchase of separate accessories. You can visit our website at

www.humminbird.com to order these accessories online or contact our Customer Resource Center

at 1-800-633-1468.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:51 PM Page 8

The sound pulses are transmitted at various frequencies

depending on the application. Very high frequencies (455kHz)

are used for greatest definition but the operating depth is

limited. High frequencies (200kHz) are commonly used on

consumer sonar and provide a good balance between depth

performance and resolution. Low frequencies (83kHz) are

typically used to achieve greater depth capability.

How Sonar Works

Sonar technology is based on sound waves. The 700 Series™ Fishing System uses sonar to locate

and define structure, bottom contour and composition, as well as depth directly below the

transducer.

Your 700 Series™ Fishing System sends a sound wave signal and determines distance by

measuring the time between the transmission of the sound wave and when the sound wave is

reflected off of an object; it then uses the reflected signal to interpret location, size, and

composition of an object.

Sonar is very fast. A sound wave can travel from the surface to a depth of 240 ft

(70 m) and back again in less than 1/4 of a second. It is unlikely that your boat can "outrun" this

sonar signal.

SONAR is an acronym for SOund and NAvigation Ranging.

Sonar utilizes precision sound pulses or "pings" which are

emitted into the water in a teardrop-shaped beam.

The power output is the amount of energy generated by the

sonar transmitter. It is commonly measured using two

methods:

The sound pulses "echo" back from objects in the water such

as the bottom, fish and other submerged objects. The

returned echoes are displayed on the LCD screen. Each time a

new echo is received, the old echoes are moved across the LCD,

creating a scrolling effect.

• Root Mean Square (RMS) measures power output over

the entire transmit cycle.

• Peak to Peak measures power output at the highest

points.

The benefits of increased power output are the ability to

detect smaller targets at greater distances, ability to

overcome noise, better high speed performance and

enhanced depth capability.

When all the echoes are viewed side by side, an easy to

interpret "graph" of the bottom, fish and structure appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 10

QuadraBeam™ Sonar

WideSide® Sonar

(with optional-purchase WideSide® transducer)

Your 700 Series™ Fishing System supports

QuadraBeam™ sonar. QuadraBeam™ sonar

provides an extremely wide 90° area of

coverage. QuadraBeam™ starts with two 45° 455

Your 700 Series™ Fishing System also supports

WideSide® sonar with the purchase of an additional

WideSide® transducer. The WideSide® transducer is a

specialized "side-looking" transducer that is extremely

useful for bank fishing or looking for bait fish in open

water. The WideSide® transducer uses three different

sonar elements that transmit signals to the left, right

and straight down from your boat. The downward

beam is 200 kHz with a 24° area of coverage. This beam

maintains a continuous digital depth readout from the

bottom directly beneath your boat. The side beams are

455 kHz with a 16° area of coverage. The side-looking

elements can be used independently, or together to

locate targets near the surface of the water on either

side of your boat.

kHz beams for

continuous 90° of

uninterrupted side to side coverage to 160 feet.

These Side Structure locating beams reveal fish

and structure to the left and right of your boat

near the bottom. For structure directly below

your boat, Quadrabeam™ uses DualBeam

PLUS™ technology.

DualBeam PLUS™ Sonar

Your 700 Series™ Fishing System uses a 200/83 kHz DualBeam

PLUS™ sonar system with a wide (60°) area of coverage.

DualBeam PLUS™ sonar has a narrowly focused 20° center beam,

surrounded by a second beam of 60°, expanding your coverage to

an area equal to your depth. In 20 feet of water, the wider beam

covers an area 20 feet wide. The 20° center beam is focused on

the bottom, to show you structure, weeds and cover. The 60°

wide beam is hunting for fish in the wide coverage area.

DualBeam PLUS™ sonar returns can be blended together, viewed

separately or compared side-by-side. DualBeam PLUS™ is ideal for

a wide range of conditions - from shallow to very deep water in

both fresh and salt water. Depth capability is affected by such

factors as boat speed, wave action, bottom hardness, water

conditions and transducer installation.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 12

Your 700 Series™ supports Navionics® Gold, HotMaps™ and HotMaps™Preimium on MMC or SD

card media.

How GPS and Cartography Work

(with optional-purchase GPS Receiver)

NOTE: Your 700 Series™ does not support Navionics® Classic Charts, only Navionics® Gold,

HotMaps™, and HotMaps™ Premium.

With the purchase of an additional GPS Receiver, your 700 Series™ Fishing System also

supports GPS and chartplotting. With a GPS Receiver, your 737 uses GPS and sonar to

determine your position, display it on a grid, and provide detailed underwater information.

The Global Positioning System (GPS) is a satellite navigation system designed and

maintained by the U.S. Department of Defense. GPS was originally intended for military use;

however, civilians may also take advantage of its highly accurate position capabilities,

typically within +/- 10 meters, depending on conditions. This means that 95% of the time, the

GPS receiver will read a location within 10 meters of your actual position. Your GPS Receiver

also uses information from WAAS (the Wide Area Augmentation System), EGNOS (the

European Geostationary Navigation Overlay Service), and MSAS (the MTSAT Satellite

Augmentation System) satellites if they are available in your area.

Your unit also comes with a built-in World map.

Your 700 Series™ uses the optional-purchase GPS Receiver to determine the position of the boat

automatically, and uses the zoom level settings on a particular view to select the best chart to

display. See Viewing Cartography for more information.

Multi-Media Card (MMC)/SD Slot

Your 700 Series™ Fishing System also has a multi-media

card (MMC)/SD slot that is used to insert optional-

purchase cards containing additional detailed maps.

GPS uses a constellation of 24 satellites that continually send

radio signals to the earth. Your present position is determined

by receiving signals from up to 16 satellites and measuring

the distance from the satellites.

NOTE: MMC/SD cards require an optional-purchase GPS

receiver in order to function.

Inserting an MMC/SD into the Card Slot

All satellites broadcast a uniquely coded signal once per

second at exactly the same time. The GPS receiver on your

boat receives signals from satellites that are visible to it.

Based on time differences between each received signal, the

GPS receiver determines its distance to each satellite. With

distances known, the GPS receiver mathematically

triangulates its own position. With once per second updates,

the GPS receiver then calculates its velocity and bearing.

If you insert an MMC/SD that contains a more detailed chart for a particular location, your

700 Series™ Fishing System will retrieve that chart and display it automatically. Use the

illustration to locate the position of the MMC/SD slot cover, remove the MMC/SD slot cover,

then insert the MMC/SD into the slot. The label on the MMC/SD should face toward the right

side of the unit. Press down on the card until it clicks into place, then replace the slot cover,

making certain that the gasket is present and positioned correctly before re-installing the

cover, then replace and tighten snugly - do NOT overtighten, as this will not improve water

resistance, and may damage the cover.

The optional-purchase GPS Receiver, when used with your 700 Series™ Fishing System, allows you

to combine easy-to-use FishingGPS™ chartplotter and navigation capabilities with advanced

fishfinding. The following GPS functionality is currently supported by the 700 Series™ Fishing

System when it is connected to the optional-purchase GPS receiver.

Software Updates

Use the MMC/SD slot to update the software version of your control head. To update the

software in your control head, plug in the appropriate MMC/SD card that contains a software

update file; the unit will recognize it, will tell you what software version your control

head is currently running, and will ask you if you want to update the software in the unit

to match that on the MMC/SD card. You can obtain software updates from the

www.humminbird.com website.

•

View current position

View current track (breadcrumb trail)

View precision speed and heading from your GPS receiver

Save tracks, waypoints and routes

Travel a route and navigate from one waypoint to the next.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 14

What’s On the Display

The 700 Series™ Fishing System can display a variety of useful information about the area

under and adjacent to your boat, including the following items:

83 kHz, Wide Beam Hollow Fish Symbol

Depth - water depth; can be set to alarm

when the water becomes too shallow.

Cursor - available in Freeze Frame and can

depth of a sonar return and bottom depth

be positioned in the Sonar View to provide

below the cursor.

Speed - if a Temp/Speed accessory or GPS

Receiver is attached, the 700 Series™ can

display the speed of the boat, and can keep a

Triplog of nautical or statute miles traveled.

Structure - where fish may be hiding.

Fish - fish are displayed as arches and/or fish

icons, and the unit can be set to alarm when a

fish of a certain size is detected. When a target

is detected and Fish ID+ is on, a Fish ID+^TM

symbol with depth is displayed. The size of

the symbol shows the intensity of the sonar

return. The unit will clearly show schools of

Bait Fish as "clouds" of different shapes and

sizes, depending on the number of fish and

boat speed.

Temperature - water surface temperature.

Timer - elapsed time with Temp/Speed

Accessory or GPS Receiver.

Distance - distance traveled with Temp/Speed

Accessory or GPS Receiver.

Average Speed - average speed reading with

Temp/Speed Accessory or GPS Receiver.

200 kHz, Narrow Beam Shaded Fish Symbol

Thermoclines - layers of water with different

temperatures that appear at different depths

and different times of the year. A thermocline

typically appears as a continuous band of

many gray levels moving across the display at

the same depth.

Bait Ball

Hard Bottom

Rocky Bottom

Second Sonar Return - when the sonar

signal bounces between the bottom and the

surface of the water and back again. Use the

appearance of the second return

to determine bottom hardness. Hard

bottoms will show a strong second return,

while soft bottoms will show a very weak one

or none at all.

Soft Bottom

RTS® (Real Time Sonar) Window

Battery Voltage - the voltage of the boat’s

battery; can be set to alarm if the voltage falls

below a certain point.

Cursor Dialog Box - indicates cursor depth

directly below the cursor.

on the display and the depth of the bottom

NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either

optional-purchase device is connected to the 700 Series™ Fishing System. If both devices are

connected, then only the information from the GPS receiver will be displayed on the view.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 16

Views

Sonar View

The views available on your 700 Series™ Fishing System are:

Sonar View presents a historical log of sonar returns. Depth is always displayed. Readouts for

temperature and speed are automatically displayed if the appropriate accessory is connected. The

most recent sonar returns are charted on the right side of the window; as new information is

received, the older information is moved across the display to the left. A Digital Depth Readout is

displayed in the upper left corner. A scale with Upper and Lower Depth Range readouts appears

along the right edge of the Sonar View. The scale indicates the distance from the surface of the

water to a depth range sufficient to show the bottom. Depth Range is automatically selected to

keep the bottom visible on the display, although you can adjust it manually as well (see Sonar

X-Press^TMMenu). Six additional Digital Readouts display information from optional-purchase

accessories. These information boxes can be customized to show only the information desired

(see Setup Menu Tab, Select Readouts).

Sonar views:

Navigation views:

• Sonar View

• Zoom View

• Bird’s Eye View

• Chart View

• 200/83 kHz Split Sonar View

• Big Digits View

• Combo View

• Circular Flasher View

• Screen Snapshot View

• Side Beam View

• WideSide® View

(with optional-purchase

WideSide® transducer)

Sonar View

Upper Depth

Range

Depth

NOTE: When you change any menu settings that affect the sonar, the view will update

immediately (i.e. you don’t have to exit the menu to apply the change to the screen). For instance,

by switching between "Inverse" and "Structure ID®" from the X-Press^TMMenu it is possible to quickly

alternate between the two viewing methods.

Temperature

RTS® Window

Triplog

Cursor

Sonar History

Window

NOTE: WideSide® View requires the purchase of the WideSide® transducer. You can visit our website

at www.humminbird.com to order accessories online or contact our Customer Resource Center at

1-800-633-1468.

Cursor Dialog Box

Lower Depth

NOTE: Navigation views require the purchase of the GPS Receiver. You can visit our website at

www.humminbird.com to order these accessories online or contact our Customer Resource Center

at 1-800-633-1468.

Range

NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the bottom.

This usually happens if the water is too deep, the transducer is out of the water, the boat is moving

too fast, or for any other reason that the unit can’t accurately receive continuous data.

Sonar View is the default view. When the VIEW key is pressed, the display cycles through the

available views. When the EXIT key is pressed, the display cycles through the available views

in reverse order. Any view can be hidden or displayed as part of the view rotation using the

Views Menu tab.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 18

Understanding Sonar History

Bottom Presentation

It is important to understand the significance of the 700

Series™ Fishing System display. The display does NOT show a

literal 3-dimensional representation of what is under the water.

Each vertical band of data received by the control head and

plotted on the display represents something that was detected

by a sonar return at a particular time. As both the boat and the

targets (fish) may be moving, the returns are only showing a

particular segment of time when objects were detected, not

exactly where those objects are in relation to other objects

shown on the display.

As the boat moves, the unit charts the changes in depth on the display to create a profile of the

Bottom Contour. The type of bottom can be determined from the return charted on the display. A

Hard Bottom such as compacted sediment or flat rock appears as a thinner line across the display.

A Soft Bottom such as mud or sand appears as a thicker line across the display. Rocky Bottoms

have a broken, random appearance.

Bottom Contour Profile with RTS® Window.

Temp/Speed Accessory is optional.

Real Time Sonar (RTS®) Window

A Real Time Sonar (RTS®) Window appears on the right side of the display in the Sonar View only.

The RTS® Window always updates at the fastest rate possible for depth conditions and shows only

the returns from the bottom, structure and fish that are within the transducer beam. The RTS®

Window plots the depth and intensity of a sonar return (see Sonar Menu - RTS® Window).

Hard Bottom

Soft Bottom

Rocky Bottom

The Narrow RTS® Window

indicates the sonar intensity

through the use of grayscale.

The grayscale used matches

the bottom view grayscale

setting used in the sonar

history window (i.e. Inverse,

Structure ID®, WhiteLine®,

Bottom Black). The depth of

the sonar return is indicated

by the vertical placement of

the return on the display

depth scale.

The Wide RTS® Window

indicates the sonar intensity

through the use of a bar

graph. The length of the

plotted return provides an

indication of whether the

return is weak or strong. The

depth of the sonar return is

indicated by the vertical

placement of the return on

the display depth scale. The

Wide RTS® Window does not

make use of grayscale.

The sonar returns from the bottom, structure and fish can be represented as either Inverse

(default), WhiteLine®, Structure ID®, or Bottom Black. See Sonar X-Press^TMMenu: Bottom View for

details on how to set the bottom view.

Freeze Frame

Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will freeze the screen and a

cursor will be displayed on the screen. The cursor can be positioned on the display using the

4-WAY Cursor Control key to determine the depth of any sonar return. The RTS® Window

continues to update in Freeze Frame. In addition, see the effects of menu setting changes with

Instant Image Update. Pressing EXIT will exit Freeze Frame and the display will start to scroll.

Freeze Frame is available in the Sonar, Sonar Zoom, and 200/83 kHz Split Sonar Views.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 20

Inverse is a method where weak returns are shown with dark

pixels and strong returns with lighter pixels. This has the benefit

of ensuring that weak signals will be clearly visible on the

display.

Sonar Zoom View

Sonar Zoom View increases the displayed resolution to separate sonar returns that are very close

together, such as those caused by fish suspended close to the bottom or within structure. In Zoom

View, the display is split to show a narrow slice of the full range view on the right and the zoomed

view on the left. The full range view on the right also contains the Zoom Preview Box that shows

what part of the full range view is shown in zoom view on the left; the Zoom Preview Box tracks

the bottom in the full range view.

As the depth changes, the zoomed view updates automatically to display a magnified image of

the bottom. The Zoom Preview Box shows where the zoomed view is in relation to the full range

view. The Zoom Level, or magnification, is displayed in the lower left corner and can be changed

to suit conditions (see Sonar X-Press^TMMenu: Zoom Level). Upper and Lower Zoom Depth Range

numbers indicate the depth of the water which is being viewed.

Structure ID® represents weak returns as light pixels and strong

returns as dark pixels. This has the benefit of ensuring that

strong returns will be clearly visible on the display.

Digital depth is displayed in the upper left hand corner. The digital readouts in the Sonar Zoom

View cannot be customized; therefore, information such as water temperature and voltage are

unavailable in the Sonar Zoom View.

Sonar Zoom View

Upper Depth Range,

Full Range View

WhiteLine® highlights the strongest sonar returns in white,

resulting in a distinctive outline. This has the benefit of clearly

defining the bottom on the display.

Depth

Upper Depth Range,

Zoom View

Full Range View

Zoom

Preview Box

Zoomed

View

Bottom Black displays all pixels below the bottom contour as

black, regardless of signal strength. This has the benefit of

providing a high contrast between the bottom and other sonar

returns on the display. Any targets such as fish, structure and

thermoclines will be shown using the Structure ID® method.

Lower Depth Range,

Full Range View

Zoom Level

Lower Depth

Range, Zoom View

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 22

200/83 kHz Split Sonar View

Big Digits View

Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screen

and displays sonar returns from the 200 kHz narrow beam on the right side of the screen. Depth

is always displayed in the upper left hand corner. You can use the Split Sonar View to make side

by side comparisons between the sonar returns from the 83 kHz wide beam and the 200 kHz

narrow beam.

Big Digits View provides digital data in a large, easy-to-see format. Depth is always displayed.

Readouts for temperature, speed and Triplog information are displayed automatically if the

appropriate accessory is connected to the system. The Triplog shows distance traveled, average

speed, and time elapsed since the Triplog was last reset. The digital readouts in the Big Digits View

cannot be customized.

The digital readouts in the Split Sonar View cannot be customized; therefore, information such as

water temperature and voltage are unavailable in the Split Sonar View.

Big Digits View

Timer shows the time

elapsed since Triplog

was last reset

Depth

200/83 kHz Split Sonar View

Distance is the distance

traveled since the

Triplog was last reset

Upper

Depth Range

Depth

Temperature

Voltage - the battery

voltage.

Average Speed shows

the speed since the

Speed

Triplog was last reset

Circular Flasher View

Circular Flasher View displays Real Time Sonar (RTS®) data in the traditional flasher format. Depth

and temperature are always displayed. The digital readouts in the Flasher View cannot be

customized.

83 kHz

Sonar History

Window

Lower

Depth Range

200 kHz

Sonar History Window

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 24

Screen Snapshot View

Side Beam View

When Screen Snapshot is enabled (from the Accessories menu tab), pressing the MARK key

creates a saved screen capture (when you have an optional-purchase MMC/SD card installed).

Side Beam View shows sonar information from both the left and right 90° 455 kHz beams and the

200 kHz down-looking beam in one view. The top portion of the display presents a historical log

of sonar returns from the 200 kHz down-looking sonar. The bottom portion of the display presents

a historical log of sonar returns from the 455 kHz right- and left-looking sonar. New information

appears at the top, and scrolls down the display.

Screen Capture View

Side Beam View

Depth

200 kHz

Sonar

History

Temperature

Window

Left Side 455 kHz

Sonar History

Window

Right Side

455 kHz

Sonar

History

Window

Taking a screen snapshot is a three step process:

1. Enabling Screen Snapshot from the Accessories Menu.

2. Making a Screen Snapshot.

Water Surface Line for 455 kHz

Sonar History Windows

3. Viewing a Screen Snapshot using the Screen Snapshot View.

4. Deleting a Screen Snapshot using the Screen Snapshot X-Press™ menu.

The sonar information from the side-looking beams reveals bottom contour, structure and fish

similar to the down-looking beam, but the area covered is to the left and right of the area shown

in the down-looking portion, so you actually see more of the bottom. The distance covered by the

right and left 90° beams is based on the depth setting for the down-looking beam, up to a

maximum of 160 feet.

For more information, see the Accessories Menu Tab: Using Screen Snapshot procedure and the

Screen Snapshot X-Press™ Menu.

When you start a screen snapshot, you will see a message that a waypoint has been created at the

point where your cursor is on the screen, and the screen will freeze. A status dialog box will appear

that shows the progress of the save, and that displays the numbered file name assigned to the

.BMP file that is being created, along with the percentage completed status.

The Screen Snapshot View displays up to three thumbnails of these screen captures at a time. You

can scroll through the whole list of thumbnails of screen snapshots in this view using the 4-WAY

Cursor keys. The selected thumbnail will be highlighted with arrows. See the full-sized image by

selecting a thumbnail (using the Up or Down 4-Way Cursor keys), then using the Right 4-Way

Cursor key to view the full image. A border around the full-size screen snapshot indicates that it is

just a screen snapshot, not a “live” view. You can delete the selected image, or all images, using

Delete Image or Delete All Images from the Screen Snapshot X-Press™ menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 26

WideSide® View

(with optional-purchase WideSide® transducer)

Bird’s Eye View

(with optional-purchase GPS receiver)

WideSide® View is only available if you have purchased and connected an optional-purchase

WideSide® transducer accessory and when Transducer Select is set to WideSide® (see Sonar Menu

Tab: Transducer Select). The WideSide® View displays information from the 455 kHz WideSide®

transducer. Three views are available: Left, Right and Both. The default view is Both. Information

from both the left and right beams are displayed simultaneously. The depth of the water beneath

the boat is always displayed. A bottom contour may be present while bank fishing or fishing river

channels. When fishing in the open water, a bottom contour will not be present, and only sonar

returns from either debris or fish will be displayed.

Bird's Eye View - This view is only available if you have purchased and connected a GPS Receiver,

and shows a 3-D perspective view of the track and the chart’s land contour from a point above and

behind the boat (the eye point). As the boat turns, the eye point moves to follow the boat.

When you press the 4-WAY Cursor key in the Bird’s Eye View, the position of the eye point will shift.

This allows you to move and turn the eye point so that you can look off to the sides, or even behind

the boat. Pressing the RIGHT or LEFT arrow keys on the 4-WAY Cursor key turns the eye point right

or left, while pressing the UP arrow key moves the eye point forward, and pressing the DOWN

arrow key moves the eye point backward.

WideSide View

Pressing the EXIT key moves the eye point back to its original position behind and above the boat.

Left Side View

Bank Contour

Right Side View

Bird’s Eye View

Depth

Latitude and

Longitude

Position of Boat

Open Water

(no bottom

contour visible

on-screen)

Land Contours

Boat Icon

Water Surface

Line

Speed of Boat

Depth

Side Beam

Depth Range

Bearing of Boat

with Respect to

True North

Water Surface

Temperature

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 28

Chart View

(with optional-purchase GPS receiver)

Combo View

(with optional-purchase GPS receiver)

Chart View - This view is only available if you have purchased and connected a GPS Receiver, and

shows cartography from the built-in World Map or an optional MMC map for the area surrounding

your current position. The current track (also known as the position history or breadcrumb trail)

showing where the boat has been, along with saved tracks, waypoints, and the current route

(when navigating), are overlaid on the chart. You can use the 4-WAY Cursor Control key to

shift/pan the chart to another area. You can use the ZOOM (+/-) keys to zoom in and out. You can

use the INFO key to get information on the chart objects near the cursor.

Combo View - This view is only available if you have purchased and connected a GPS Receiver, and

is displayed as a split screen, with Chart View on the left and Sonar View on the right side of the

screen. The width of the sonar window can be changed.

Combo View

Depth

Chart View without Active Cursor

Sonar Window

Cartography

Depth

Map Scale

Cartography

Speed Of Boat

Bearing of Boat

Water Surface

with Respect to

Temperature

True North

Bearing of Boat

with Respect to

Speed of Boat

Water Surface

Temperature

True North

View Orientation

(with optional-purchase GPS receiver)

Chart View with Active Cursor

Both Chart and Combo views (available when you have purchased and connected a GPS Receiver)

allow you to choose the orientation of the view. When North-Up orientation is selected, True

North is shown at the top of the display. In other words, objects located to the north of the boat

are drawn above the boat. When Course-Up orientation is selected, the direction of motion of the

boat is shown at the top of the display. In other words, objects ahead of the boat are drawn above

the boat. In both orientations, the view pans automatically, so that the boat is always centered on

the display. When the boat is stationary, it is drawn as a circle. When the boat is in motion, it takes

on a boat shape, pointed in the direction of motion (always Up in the Course-Up orientation).

Cartography

Depth

Map Scale

Active Cursor

Latitude and

Longitude

Position of

Cursor

Bearing of Boat

with Respect to

True North

Distance to

the Cursor

and Bearing

to Cursor

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 30

Nearest Current Station: Current information for the nearest current station to your present

position will be displayed. This includes the position of the station and the current changes for

today. Two graphs are also presented that show the time, direction and flow speed of the current

changes for the 24 hour time period of today’s date. You can change the date to look at current

information before or after the date displayed by pressing the LEFT or RIGHT cursor key

respectively. Press the EXIT key to remove the information box and the cursor bull’s eye will be

centered over the current station position. The cursor information boxes at the bottom of the

display will indicate the distance and bearing to the current station from your present position.

Viewing Cartography

In the Chart or Combo Views (available when you have purchased and connected a GPS Receiver),

there are several cartography-related functions that you can access using various keys.

(with optional-purchase GPS receiver)

Panning: Use the 4-WAY Cursor keys to move the chart

around on the display in the direction of the key being

pressed. When you do this, a bull's eye cursor is drawn at

the center of the screen and is linked to the boat by a gray

line, even if the boat is off the screen. At the same time, the

temperature and speed boxes in the lower left corner are

replaced with the distance and bearing from the boat to

the cursor position and the latitude/longitude coordinates

of the cursor.

Introduction to Navigation

(with optional-purchase GPS receiver)

When you have purchased and connected a GPS receiver, use the 700 Series™ Fishing System to

establish waypoints at areas of interest and to navigate to those waypoints via a savable route

(representing the shortest intended distance between waypoints). You can also view and save

tracks, which represent the actual path of the boat.

Zooming: Use the Plus (+) key to Zoom In and the Minus

(-) key to Zoom Out showing the cartography at different

Chart View with Cursor Present

NOTE: Navigation requires the purchase of the GPS receiver. You can visit our website at

www.humminbird.com to order this accessory online or contact our Customer Resource Center

at 1-800-633-1468.

scales. The scale is indicated on the left side of the display.

If you zoom in beyond the available chart data, the display will go into Overzoom mode whereby

the last available chart data is amplified to reflect the scale selected. If you zoom in so far that no

cartography is available, a lat/long grid will be drawn instead.

Waypoints, Routes and Tracks

Waypoints are stored positions that allow you to mark areas of interest or navigation points. Your

700 Series™ Fishing System can store up to 750 waypoints when you have purchased and

connected a GPS receiver.

(with optional-purchase GPS receiver)

Chart Info: Use the INFO key to get detailed information about the chart. If the cursor is active, you

will see information about the chart objects located near the cursor. If the cursor is not active, the

Chart Info menu will appear. You can select the nearest port, the nearest tide station, or the

nearest current station to see information about any of these objects.

Waypoints, Routes and Tracks

NOTE: The built-in World Map does not contain any Port, Tide or Current information. This information

is only available from optional-purchase MMC/SD cards.

Depth

Nearest Port: The position and services information for the nearest port to your present position

will be displayed. Press the EXIT key to remove the information box and the cursor bull’s eye will

be centered over the port position. The cursor information boxes at the bottom of the display will

indicate the distance and bearing to the port from your present position.

BRG: Bearing

Waypoint

to Waypoint

XTE: Cross

Track Error.

Distance of

Boat from

Route

Nearest Tide Station: Tide information for the nearest tide station to your present position will be

displayed. This includes the position of the station and the times of the high and low tides for

today’s date. A tide graph is also displayed showing the rise and fall of the tides for the 24 hour

time period encompassing the date. You can change the date to look at tide information before or

after the date displayed by pressing the LEFT or RIGHT cursor key respectively. Press the EXIT key

to remove the information box and the cursor bull’s eye will be centered over the tide station

position. The cursor information boxes at the bottom of the display will indicate the distance and

bearing to the tide station from your present position.

Bearing of

Boat with

Route

DTG: Distance

to Go to

Waypoint

Track

Respect to

True North

Water Surface

Temperature

Speed of Boat

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 32

fields, use the UP and DOWN Cursor keys to change the letter or number. All upper and lower case

letters are available, as well as digits 0-9 and some punctuation characters. In the Waypoint Icon

field, use the UP and DOWN Cursor keys to change the icon used to represent the waypoint on the

Combo and Chart Views. You can exit these fields with the LEFT and RIGHT Cursor keys or by

pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.

Routes link two or more waypoints together to create a path for navigation, and are used in trip

planning. You can link individual waypoints together by using the GOTO key. A route represents

your intended navigation and shows the shortest path from each waypoint to the next. As you

travel a route, staying on the route line is the most efficient way to get to your destination,

although you should always look out for obstacles not shown on the chart. Your 700 Series™

Fishing System can store up to 50 routes that can each contain up to 50 waypoints.

To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor keys to

select a sort order:

Tracks consist of detailed position history, and are displayed as a breadcrumb trail of trackpoints.

The Current Track shows the position history since the unit was powered up (maximum of 2000

trackpoints displayed). You can clear the Current Track or save it at any time. Your 700 Series™

Fishing System can store up to 10 saved tracks, each containing 2000 trackpoints. The current

track represents your actual path so far.

•

Name shows the waypoints alphabetically

Time shows the most recently-created waypoint first

Distance shows the closest waypoint first.

Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT Cursor key

to display a list of waypoints. Select the waypoint you want to delete, then press the RIGHT Cursor

key. You will be asked to confirm deletion before the waypoint is actually deleted.

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MARK key to save the current

(with optional-purchase GPS receiver)

position of the boat as a waypoint.

Navigate to a Waypoint or Position

Navigate to the cursor position: From the Chart or Combo view, use the Cursor key to select a

position or waypoint to which you want to navigate. Press the GOTO key. Navigation will begin

immediately.

(with optional-purchase GPS receiver)

Save the cursor position as a waypoint: On the Chart or Combo view, use the Cursor key to

designate the position you want to save as a waypoint. Then press the MARK key to save the

marked position as a waypoint.

Save a position from the sonar history: On any Sonar view, use the Cursor key to point to a feature

in the sonar history (also called the Sonar Saver feature). Press the MARK key to create a waypoint

at the location where that sonar reading was taken. The new waypoint will also record the depth

at that location.

Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to which you

would like to navigate from the waypoint list and press the RIGHT Cursor key to select it.

NOTE: By repeating the previous instructions, you can add more waypoints to create a longer multi-

segment route.

NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is

automatically assigned. You can edit the waypoint information later to give it a different name and

select an icon to represent it (see Waypoint submenu on the Navigation Main Menu Tab).

Skipping a waypoint: From the Navigation X-Press^TMmenu, select Skip Next Waypoint and press

the RIGHT Cursor key. If there is not another waypoint to skip to, navigation will be cancelled.

Display the Waypoints Submenu: From any view, press the MENU key twice to display the Main

Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Waypoints and

press the RIGHT Cursor key to display the Waypoints submenu.

Cancel navigation: From the Navigation X-Press^TMmenu, select Cancel Navigation and press the

RIGHT Cursor key. Canceling navigation removes the route and any waypoints created using the

GOTO key, but does not remove any saved routes from memory. You will be prompted to save the

current route when you cancel navigation.

Program a specific position as a waypoint: To create a waypoint that is NOT your current position,

from the Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the

Cursor keys to program a waypoint name, latitude, longitude, and icon before selecting Save.

Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to

display a list of saved waypoints. Select the waypoint you want to edit and press the RIGHT Cursor

key. Use the 4-WAY Cursor Control key to move from field to field, and the UP and DOWN Cursor

keys to changes values once you are in a field. In the Waypoint Name, Latitude and Longitude

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 34

Create a route: From the Routes submenu, select Create and press the RIGHT Cursor key. A Route

Edit screen will be displayed with an empty route. You can name the route, add waypoints to the

route from the list of all waypoints, and order the waypoints in the route using the Cursor keys.

Add a Waypoint Target or Trolling Grid

(with optional-purchase GPS receiver)

Waypoint Target

Add or Remove a Waypoint Target: From the Waypoints

submenu, select Target and press the RIGHT Cursor key to

display a list of waypoints. Select the waypoint you want to

target. A target consisting of concentric circles centered on

the selected waypoint will appear on all of the navigation

views; the target shows various distance ranges from the

targeted waypoint. To remove the target, choose Remove

Target from the Navigation X-Press™ menu.

Edit a saved route: From the Routes submenu, select Edit and press the RIGHT Cursor key. A Route

Edit screen will be displayed. Select the route you wish to edit and press the RIGHT Cursor key. Re-

name the route or change, delete or re-order the waypoints used in the route.

Delete a saved route: From the Routes submenu, select Delete and press the RIGHT Cursor key.

Select the route you wish to delete and press the RIGHT Cursor key. You will be asked to confirm

your choice by pressing the RIGHT Cursor key again before the route is deleted.

Chart View with Target

Travel a saved route: From the Routes submenu, select Travel and press the RIGHT Cursor key. A

list of saved routes will appear. Select the route you wish to travel and press the RIGHT Cursor key

to make this route the current route and begin navigation. You may also travel the route in either

forward or reverse order.

Add or Remove a Trolling Grid: From the Waypoints

submenu, select Grid and press the RIGHT Cursor key to

display a list of waypoints. Select the waypoint to which

you want to add the grid. The trolling grid will appear on all

of the navigation views, and can be used as a guide when

trolling around a waypoint. The grid can be rotated to any

desired heading using Grid Rotation from the Navigation

Main menu. To remove the trolling grid, choose Remove

Grid from the Navigation X-Press™ menu.

Route Info: From the Routes submenu, select Info and press the RIGHT Cursor key. A list of saved

routes will appear. Select the route for which you want information, and press the RIGHT Cursor

key. The list of waypoints in the route will be shown, with the distance and bearing from each

waypoint to the next, as well as the distance and bearing from the current position to the first

waypoint in the route.

Waypoint

Trolling

Grid

Save or Clear a Current Track

Save the current track: From the Navigation X-Press^TMmenu, select Save Current Track and press

the RIGHT Cursor key. The track will remain on the display, but will change from black to gray. To

remove the track completely from the display, see Edit, Delete or Hide Saved Tracks.

(with optional-purchase GPS receiver)

Chart View with Grid

NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a

grid to a new waypoint, the original waypoint will lose its target or grid.

NOTE: When you save a track, a name is automatically assigned. The track name consists of a

date/time stamp, but can be re-named later (see Edit a Saved Track).

NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the

trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or

out will decrease or increase the spacing, respectively.

Clear the current track: From the Navigation X-Press^TMmenu, select Clear Current Track and press

the RIGHT Cursor key. The track will be removed from the display and discarded.

Save, Edit or Delete a Route

(with optional-purchase GPS receiver)

Save the current route: While you are navigating, the current route can be saved. From the

Navigation X-Press^TMmenu, select Save Current Route and press the RIGHT Cursor key. Navigation

will continue.

Edit, Delete or Hide Saved Tracks

Display the Tracks Submenu: From any view, press the MENU key twice to display the Main Menu

System, then use the RIGHT Cursor key to select the Navigation tab. Select Tracks and press the

RIGHT Cursor key to display the Tracks submenu.

(with optional-purchase GPS receiver)

Display the Routes submenu: From any view, press the MENU key twice to display the Main Menu

System, then use the RIGHT Cursor key to select the Navigation tab. Select Routes and press the

RIGHT Cursor key to display the Routes submenu.

Edit a saved track: From the Tracks submenu, select Edit and press the RIGHT Cursor key to display

the list of saved tracks. Select the track you want to edit and press the RIGHT Cursor key. When the

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 36

Edit Track dialog box appears, use the Cursor keys to move between fields. In the Track Name field,

the UP and DOWN Cursor keys change the letter or number. All upper and lower case letters are

available, as well as digits 0-9 and some punctuation characters. You can exit the Track Name field

with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT

Cursor key to save your changes.

VIEW Key

The VIEW key is used to cycle through all available views. Press the VIEW key to

advance to the next view. Repeatedly pressing VIEW cycles through all views

available. Views can be hidden to optimize the system to your fishing

requirements (see Views Menu Tab).

Delete a saved track: From the Tracks submenu, select Delete and press the RIGHT Cursor key to

display the list of saved tracks. Select the track you want to delete and press the RIGHT Cursor key.

You will be asked to confirm deletion before the track is actually deleted.

INFO Key

Info - Press the INFO key while in Bird's Eye, Chart or Combo View to display

information about objects that are nearest to an active cursor.

Hide or display a saved track: From the Tracks submenu, select Visibility and press the RIGHT

Cursor key to display the list of saved tracks. Select the track you want to hide or display and use

the Cursor keys to select Hidden or Visible. Press the EXIT key to return to the Tracks submenu.

NOTE: The INFO key only functions when you have purchased and connected a GPS receiver, as the

Bird's Eye, Chart and Combo views are only available when the GPS receiver is connected.

Key Functions

If the cursor is not active, the following menu will be displayed. Use the

4-WAY Cursor key to select Nearest Port, Nearest Tide Station or Nearest

Current Station, then use the RIGHT Cursor key to display the requested

information.

Your 700 Series™ Fishing System user interface consists of a set of easy-to-use keys that work with

various on-screen views and menus to give you flexibility and control over your fishing

experience.

NOTE: The built-in World map does not contain any chart information,

including Port, Tide or Current information. This information is only

available from optional-purchase MMC/SD cards when you also have an

optional-purchase GPS Receiver connected.

POWER/LIGHT Key

The POWER/LIGHT key is used to turn the 700 Series™ Fishing System on and off,

and also to adjust the backlight and contrast of the display. Press the

POWER/LIGHT key to turn the unit on. The Title screen is then displayed until the Fishing System

begins sonar operation.

MENU Key

The MENU key is used to access the menu system.

Your Fishing System will start up with the backlight on and will

automatically turn it off to conserve power. To turn the backlight on for

night fishing, or to adjust the display contrast, press the POWER/LIGHT

key to access the Light and Contrast menu. Use the 4-WAY Cursor key to

select Light or Contrast and then use the LEFT or RIGHT Cursor key to change the settings. Press

EXIT to exit the Light and Contrast menu.

Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start-Up

Options menu.

X-Press^TMMenu - Press the MENU key once for the Sonar X-Press^TMMenu. The X-Press^TMMenu

allows you to access frequently-used settings without having to navigate through the whole

menu system. When the X-Press^TMMenu is displayed, you can use the UP or DOWN Cursor keys to

move to a particular menu choice. As soon as you alter a parameter (using the RIGHT or LEFT

Cursor keys) the X-Press^TMMenu will collapse temporarily, and the screen will update if it is affected

by your menu setting change, allowing you to see the effects of your action immediately.

Reactivate the X-Press^TMMenu by using the UP or DOWN Cursor keys.

Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will appear

telling you how many seconds there are until shutdown occurs. Your Fishing System should

always be turned off using the POWER/LIGHT key. This will ensure that shutdown occurs properly

and any menu settings will be saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 38

Main Menu - Press the MENU key twice for the tabbed Main Menu System. The Main Menu

System is organized under tabbed headings to help you find a specific menu item quickly: Alarms,

Sonar, Navigation, Chart, Setup, Views and Accessories tabs are part of your tabbed Main Menu

System. Use the LEFT or RIGHT 4-WAY Cursor Control key to select a tab; then use the DOWN or

UP key to select the menu item, and the LEFT or RIGHT key to alter a menu setting.

GOTO Key

If the Cursor is active, pressing the GOTO key while in any view creates a waypoint

and starts navigation towards that waypoint. If the Cursor is not active, pressing

the GOTO key displays the list of waypoints, so that you can select the waypoint

towards which you want to navigate.

NOTE: The Navigation and Chart tabs only appear when you have purchased and connected a

GPS receiver.

NOTE: The GOTO key only functions when you have purchased and connected a GPS receiver.

ZOOM (+/-) Key

4-WAY Cursor Control Key

Press the - or + ZOOM keys while in any of the Navigation Views or the

Sonar Zoom View to change the scale of the view to appear closer or

farther away.

The 4-Way Cursor Control Key has multiple functions, depending on the

situation:

•

Use the DOWN or UP arrow keys to select a menu choice from the menu list, then use

the LEFT or RIGHT arrow keys to change a menu setting.

EXIT Key

NOTE: Menu choices are implemented and saved immediately - no further action is required.

The EXIT key has multiple functions, depending on the situation:

•

In all Sonar views but the Big Digits view, pressing any 4-WAY Cursor Control key will

activate Freeze Frame and will then allow you to position the cursor on the display.

• If an alarm is sounding, pressing EXIT will cancel the alarm.

• If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.

• If a menu is active, pressing EXIT will return to the previous level in the menu system.

• Pressing EXIT will cycle through the available views in reverse order.

• If Freeze Frame is active, pressing EXIT will return to a scrolling display.

• If the Cursor is active, pressing EXIT will remove the cursor from the display.

MARK Key

Press the MARK key while in any view to mark the position of a waypoint, either

at the current boat location, or, if the Cursor is active, at the current Cursor

location.

The MARK key only functions if you have the optional-purchase GPS receiver connected, or if you

have enabled Screen Snapshot from the Accessories menu tab. If you have enabled the Screen

Snapshot feature, pressing the MARK key still creates a waypoint, but it also captures the screen

image to the optional-purchase MMC/SD card.

Accessory Bus

Use the Accessory Bus to expand the functionality of the 700

Series™ Fishing System. Accessories plug directly into the 700

Series™ Fishing System, enabling Advanced features such as

WeatherSense®, GPS Functionality and the SmartCast® Wireless

Sonar Link. Additional menu tabs and menu choices will be added

NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot feature

to work.

to the menu system automatically when an accessory is plugged

into the unit. In addition, multiple accessories can be attached

simultaneously. See Accessories Menu Tab and 700 Series™ Fishing System Accessories in this

manual, as well as your accessory's Operations Manual for additional details.

Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled but

there is no GPS receiver connected, pressing the MARK key will capture the screen image and

display an error saying that a GPS position fix is required to create a waypoint.

NOTE: Accessories to enable WeatherSense®, GPS Functionality and the SmartCast®

Wireless Sonar Link require separate purchases. You can visit our website at

www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468 for

additional details.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 40

Press the MENU key twice for the Main Menu, then use the 4-WAY Cursor LEFT or RIGHT key to

select a tab, and use the DOWN or UP key to select a specific menu item under that tab, then use

the LEFT or RIGHT keys again to change a menu setting. Press the EXIT key to move quickly to the

top of the tab. A down arrow at the bottom of a menu means that you can scroll to additional

menu choices using the DOWN Cursor key. A right or left arrow on a menu choice means that you

can use the RIGHT or LEFT Cursor keys to make changes or see more information.

Powering Up the Unit

Turn on your 700 Series™ Fishing System by pressing the

POWER/LIGHT key. The Title screen is displayed until the

Fishing System begins operation. Your Fishing System will

begin Normal or Simulator operation, depending on the

presence or absence of a transducer.

737

NOTE: The Main Menu choices will vary depending on whether you are in Normal or Advanced User

Mode, and whether you have an optional-purchase GPS receiver attached.

User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire the

highest level of control over the Fishing System and Normal Mode for users who desire

greater simplicity and fewer menu choices. Additional Advanced menu choices will be

displayed throughout the menu system when you navigate to specific menus while in

Advanced Mode. Any changes made while in Advanced Mode will remain in effect after you

switch back to Normal Mode. See Setup Menu Tab: User Mode for specific instructions on

changing to Advanced User Mode.

737 Title Screen

The Menu System

The menu system is divided into easy-to-use menu modules. The main components of the menu

system are:

Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start-Up

Options menu.

X-Press^TMMenu - The X-Press^TMMenu allows you to access the settings

that are changed frequently without having to navigate through the

whole menu system. Press the MENU key once to display the X-Press^TM

Menu. When you select a menu item from the X-Press^TMMenu, the

menu will collapse, leaving only the menu choice on the screen. Use the

UP or DOWN Cursor keys to reactivate the X-Press^TMMenu.

Sonar Tab, Normal Mode

NOTE: The X-Press^TMMenu choices will vary depending on which view is

X-Press^TMMenu

active when you press the MENU key, as well as whether you are in

Normal or Advanced User Mode. Either the Sonar, Navigation, or Screen

Snapshot X-Press^TMMenu will appear, depending on the view you are in.

Main Menu Tabs - Less frequently-adjusted menus are grouped into the

Main Menu System. The Main Menu system is organized under the

following tab headings to help you find a specific menu item quickly:

Alarms, Sonar, Navigation, Chart, Setup, Views and Accessories.

Sonar Tab, Advanced Mode

NOTE: The Navigation and Chart tabs will only appear if you have an

optional-purchase GPS receiver connected.

Total Screen Update - when you change any menu settings that affect the Sonar View, the view

will update immediately (i.e. you don’t have to exit the menu to apply the change to the screen).

For instance, by switching between "Inverse" and "Structure ID®" from the X-Press^TMMenu it is

possible to alternate quickly between the two viewing methods.

Main Menu System

Normal User Mode

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 42

NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from the

Start-Up Options menu as opposed to letting the Fishing System enter Simulator automatically (as

it will if a transducer is not connected and you do nothing during power up). Manually selecting

Simulator from the Start-Up Options menu allows you to pre-configure your 700 Series™ Fishing

System for on the water operation. Any menu changes you make will be saved for later use.

Start-Up Options Menu

Press the MENU key when the Title screen is displayed to access the Start-Up Options menu.

Use the UP or DOWN 4-WAY Cursor keys to position the

cursor, then the RIGHT Cursor key to select one of the

following choices. If you wait too long, the system will

default to whichever menu mode happens to be

highlighted:

A message will appear on the display periodically to remind you that you are using the Simulator.

Exit the Simulator by powering your Fishing System off.

• Normal

System Status

• Simulator

• System Status

Use System Status to view system connections and to conduct a unit self-test.

• PC Connect (use with PC Connect Cable).

The following screens are displayed in turn when you press the VIEW button when using System

Status:

Start-Up Options Menu

See the following paragraphs for more information about

each of these choices.

• Self Test

• Accessory Test

• GPS Diagnostic View (with optional-purchase GPS receiver).

Normal Operation

Use Normal operation for on the water operation with a transducer connected. In addition, your

700 Series™ Fishing System uses advanced transducer detection methods to determine if a

transducer is connected. If a functioning transducer is connected, Normal operation will be

selected automatically at power up and your Fishing System can be used on the water.

Exit System Status by powering your Fishing System off.

Self Test

Self Test displays results from the internal diagnostic self

test, including unit serial number, Printed Circuit Board

(PCB) serial number, software revision, total hours of

operation and the input voltage.

Exit Normal operation by powering your Fishing System off.

Simulator

Use the Simulator to learn how to use your 700 Series™

Fishing System before taking your boat on the water. The

Simulator is a very powerful tool that simulates on the

water operation, providing a randomly-updated display.

We recommend going through this manual while using the

Simulator, since all of the menus function and affect the

display the way they actually do when in Normal operation.

System Status Self Test Screen

Simulator, Shown with Optional

WeatherSense^TMAccessory

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 44

Accessory Test

PC Connect

(with PC Connect Cable only)

Accessory Test lists the accessories connected to the system.

Use PC Connect to update the software of the 700 Series™ control head. This feature requires the

use of the PC Connect Cable. Complete instructions are included with the PC Connect Cable

accessory.

NOTE: The speed accessory will be detected only if the

paddlewheel has moved since your 700 Series™ Fishing

System was powered up.

NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at

www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.

Exit PC Connect mode by powering the Fishing System off.

System Status Accessory Test Screen

GPS Diagnostic View

(with optional-purchase GPS receiver)

GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart

shows the location of each visible GPS satellite with its satellite number and a signal strength bar.

A dark grey bar indicates that the satellite is being used to determine your current position. A light

gray bar indicates that the satellite is being monitored, but is not yet being used.

NOTE: The GPS Diagnostic View only appears if the optional-purchase GPS Receiver is connected.

This view also reports the current position, local time and date, and other numeric information. The

current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced fix has been

augmented using information from WAAS, EGNOS, or MSAS. A 3D or Enhanced Fix is required for

navigation. HDOP (the Horizontal Dilution of Precision) is a GPS system parameter which depends

on the current satellite configuration. HDOP is used to calculate the Estimated Position Error.

GPS Diagnostic View

Sky Chart

Satellite Being

Used

Satellite Being

Monitored

Current Latitude

and Longitude

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 46

Sonar X-Press^TMMenu

The Sonar X-Press^TMMenu provides access to the settings most

frequently-used. Press the MENU key once while in any of the

Sonar Views to access the Sonar X-Press^TMMenu.

Side

(WideSide® transducer: WideSide® view only)

Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide® View.

A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side menu

choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer

Select) and can only be accessed from the Sonar X-Press^TMmenu when you are in WideSide® view.

NOTE: Menu choices will vary depending on system settings such as

whether the unit is set for Advanced User mode or what transducer

is currently selected.

NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at

www.humminbird.com to order this accessory online or contact our Customer Resource Center at

1-800-633-1468.

To adjust the Side:

1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is

connected, then highlight Side on the Sonar X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.

(L [Left], Both, R [Right], Default = Both)

Sonar X-Press^TMMenu

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 48

Sensitivity

Upper Range

(Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher

Sensitivity controls how much detail is shown on the display

and will adjust the sensitivity of all sonar frequencies. Increasing the sensitivity shows more sonar

returns from small baitfish and suspended debris in the water; however, the display may become

too cluttered. When operating in very clear water or greater depths, increased sensitivity shows

weaker returns that may be of interest. Decreasing the sensitivity eliminates the clutter from the

display that is sometimes present in murky or muddy water. If Sensitivity is adjusted too low, the

display may not show many sonar returns that could be fish.

views only)

Upper Range sets the shallowest depth range that will be displayed on the Sonar, Split Sonar, Big

Digits and Circular Flasher Views. The Upper Range menu choice is available when User Mode is

set to Advanced (see Setup Menu Tab: User Mode) and can only be accessed from the Sonar, Split

Sonar, Big Digits and Circular Flasher Views. Upper Range is often used with Lower Range.

NOTE: The Sensitivity setting is a global setting and will adjust the sensitivity of all sonar

frequencies, as compared to specific sensitivity adjustments (such as 83 kHz Sensitivity, 455 kHz

Balance or Wideside Sensitivity) that allow you to adjust the level of sensitivity for one specific

beam at a time.

For example, if you are only interested in the area between 20 and 50 feet deep,

you should set the Upper Depth Range to 20 and the Lower Depth Range to 50.

The Sonar View will then show the 30 foot area between 20 and 50, and will not

show the surface or the bottom (assuming the bottom is deeper than 50 feet),

and will show greater detail for that area between 20 and 50 feet.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range

regardless of the manual settings entered.

To adjust the Upper Range:

1. Make sure you are in Advanced Mode, then highlight Upper Range on the Sonar

X-Press^TMMenu.

Sensitivity at Low

Sensitivity at Medium

Sensitivity at High

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Upper Range

setting. (0 to 1490 feet or 0 to 497 meters [International Models Only], Default = 0)

To adjust the Sensitivity:

1. Highlight Sensitivity on the Sonar X-Press^TMMenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Sensitivity

setting. (Low = 1, High = 20, Default = 10)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 50

Lower Range

Side Beam Range

(WideSide® transducer: WideSide® view only)

Lower Range sets the deepest depth range that will be

displayed. Automatic is the default setting. When in automatic mode, the lower range will be

adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range

into Manual mode. Use both Upper and Lower Range together to view a specific depth range

manually when looking for fish or bottom structure.

corner of the screen when you start manually adjusting the Lower Range to indicate that you

are in Manual mode.

Side Beam Range sets the deepest range that will be displayed in the WideSide® View. The

range must be set manually to keep the bottom visible on the display. If the Side Beam Range

is set too deep for current depth conditions the sonar information will become compressed on

the display and valuable detail will be lost. A WideSide® transducer must be connected to the

700 Series™ Fishing System. Side Beam Range menu choice is available when Transducer

Select is set to WideSide® (see Sonar Menu Tab: Transducer Select) and can only be accessed

from the WideSide® view.

will be displayed in the lower right

For example, if you are fishing in 60 feet of water but are only interested in

the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth

Range limit to 30. The display will show the 0 to 30 foot range, allowing you

to see a more detailed view than you would see if the display went all the way

to the bottom.

NOTE: The Side Beam Range requires the purchase of the WideSide® transducer. You can visit our

website at www.humminbird.com to order this accessory online or contact our Customer Resource

Center at 1-800-633-1468.

To adjust the Side Beam Range:

1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is

connected, then highlight Side Beam Range on the Sonar X-Press^TMmenu.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range

regardless of the manual settings entered.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Side Beam

Range setting. (6 - 160 feet or 2 - 50 meters [International Models only], Default = 160 feet

[50 meters])

To adjust the Lower Range:

1. Highlight Lower Range on the Sonar X-Press^TMMenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower

Range setting. (AUTO, 10 to 1500 feet, 3 to 500 meters [International Models only],

Default = AUTO)

Chart Speed

Chart Speed determines the speed at which the sonar

information moves across the display, and consequently the amount of detail shown. A faster

speed shows more information and is preferred by most anglers; however, the sonar information

moves across the display quickly. A slower speed keeps the information on the display longer, but

the bottom and fish details become compressed and may be difficult to interpret. Regardless of

the Chart Speed setting, the RTS® Window will update at the maximum rate possible for the

depth conditions. Adjust Chart Speed to your personal preference.

To adjust the Chart Speed:

1. Highlight Chart Speed on the Sonar X-Press^TMMenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart Speed

setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 5)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 52

Bottom View

Bottom View selects the method used to represent bottom

Bottom Lock

(Sonar Zoom view only)

and structure on the display.

Bottom Lock changes the mode of the Zoomed view in the Sonar Zoom View. Bottom Lock

continuously graphs the bottom at a constant point on the display regardless of changes in depth.

This "flattens" out the bottom contour, but is effective at showing fish on or near the bottom.

Inverse represents weak returns as dark pixels and strong returns as lighter pixels. This has the

benefit of ensuring that weak signals will be clearly visible on the display.

To turn on Bottom Lock:

Structure ID® represents weak returns as light pixels and strong returns as dark pixels. This has

1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press™ Menu.

the benefit of ensuring that strong returns will be clearly visible on the display.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock setting to

on. (Off, On, Default = Off)

WhiteLine® highlights the strongest sonar returns in white resulting in a distinctive outline. This

has the benefit of clearly defining the bottom on the display.

Bottom Black displays all pixels below the bottom contour as black, regardless of signal strength.

This has the benefit of providing a high contrast between the bottom and other sonar returns on

the display. Any targets such as fish, structure and thermoclines will be shown using the Structure

ID® method.

Cancel Navigation

(only when Navigating)

Cancel Navigation discards the current route and exits Navigation Mode. This menu choice

will only appear when you are currently navigating a route. This will not delete a previously-

saved route.

See Bottom Presentation for more information.

To adjust the Bottom View:

1. Highlight Bottom View on the Sonar X-Press^TMMenu.

To Cancel Navigation:

1. Highlight Cancel Navigation on the Sonar X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom View setting.

(Inverse, Structure ID®, WhiteLine®, Bottom Black, Default = Inverse)

2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.

3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key

once more. To avoid canceling navigation, press the LEFT Cursor key.

Bottom Range

(Sonar Zoom view only when Bottom Lock is On)

4. The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key to save

the route or the LEFT 4-WAY Cursor key to decline saving the route.

Bottom Range allows you to control how much of the water column, measured up from the

bottom, is shown in the Sonar Zoom View. Choose a small value to see lowlying bottom structure

or details of the bottom return. Choose a larger value to see large structure in deeper water. It is

possible to set the Bottom Range to be greater than the depth. In this case, you may see surface

clutter in a wavy band that mirrors changes in the depth.

To adjust the Bottom Range:

1. In the Sonar Zoom View, highlight Bottom Range on the Sonar X-Press™ menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Range setting.

(10 - 60 feet, 2-10 fathoms, or 3-20 meters [International Models only], Default = 15 feet)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 54

Navigation X-PressTM Menu

(optional-purchase GPS receiver, navigation views only)

Waypoint [Name]

(Only with an active cursor on a waypoint)

The Navigation X-Press^TMmenu provides access to the settings

most frequently used. Press the MENU key once while in the

Bird's Eye View, the Chart or the Combo View to access the

Navigation X-Press^TMmenu.

Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor.

To view the Waypoint [Name] Submenu:

1. Move the cursor onto an existing waypoint and press the MENU key once, or use Cursor

to Waypoint to select a waypoint from a list of saved waypoints.

2. Highlight Waypoint[Name] on the Navigation X-Press^TMmenu.

NOTE: Menu choices will vary depending on system settings, such

as whether you are currently navigating.

3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu, which

contains the following menu choices:

NOTE: The Navigation X-Press™ menu will only appear if you have

an optional-purchase GPS receiver connected and when you are in a

navigation view.

Waypoint Submenu

The Waypoint Submenu contains the following menu choices:

Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be

used to represent the waypoint in the Chart and Combo Views.

Navigation X-Press^TMMenu

Delete allows you to delete a waypoint from the list of saved waypoints.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 56

Cursor to Waypoint

(Chart or Combo view only)

Save Current Route

(only when Navigating)

Save Current Route allows you to save the current route being displayed. This menu choice will

only appear when you are currently navigating a route.

Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can

locate it or edit it.

NOTE This X-Press^TMmenu item appears only if you have saved waypoints.

To Save Current Route:

1. Highlight Save Current Route on the Navigation X-Press^TMmenu.

To move cursor to a saved waypoint:

2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current route.

1. Highlight Cursor to Waypoint on the Navigation X-Press^TMmenu.

3. The Confirm dialog box will appear. To save the current route, press the RIGHT Cursor key

once more. To cancel saving the current route, press the LEFT Cursor key.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.

3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to

move the cursor to, then use the RIGHT 4-WAY Cusor Control key to select the

destination waypoint.

Skip Next Waypoint

(only when Navigating)

Skip Next Waypoint removes the next waypoint from the current route. This menu choice will

only appear when you are currently navigating a route.

Save Current Track

Save Current Track allows you to save the current track being

displayed. After the current track is saved, a new current track is started.

To Skip Next Waypoint:

1. Highlight Skip Next Waypoint on the Navigation X-Press^TMmenu.

To Save Current Track:

1. Highlight Save Current Track on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint.

3. The Confirm dialog box will appear. To skip the next waypoint, press the RIGHT Cursor

key once more. To cancel skipping the next waypoint, press the LEFT Cursor key.

2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3. The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key

once more. To cancel saving the current track, press the LEFT Cursor key.

Cancel Navigation

(only when Navigating)

Clear Current Track

Clear Current Track allows you to clear the current track being

Cancel Navigation discards the current route and exits Navigation Mode. This menu choice

will only appear when you are currently navigating a route. This will not delete a previously-

saved route.

displayed and start a new track at the present position.

To Cancel Navigation:

To Clear Current Track:

1. Highlight Cancel Navigation on the Navigation X-Press^TMmenu.

1. Highlight Clear Current Track on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.

2. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.

3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key

once more. To avoid canceling navigation, press the LEFT Cursor key.

3. The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor key

once more. To cancel clearing the current track, press the LEFT Cursor key.

4. The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key to save

the route or the LEFT 4-WAY Cursor key to decline saving the route.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 58

Remove Target

(only if a Target is Active)

Waypoint [Name]

(Most recently-created waypoint)

Remove Target removes the waypoint target from the display. This menu choice will only appear

Waypoint [Name] allows you to view the waypoints submenu for the most recently created

when a target has already been applied to a waypoint.

waypoint.

NOTE: See Add a Waypoint Target or Trolling Grid for more information.

NOTE: You must have pressed the MARK key at least once since you last powered up the fishfinder

for this menu choice to appear.

To Remove a Target:

To view the Waypoint [Name] Submenu:

1. Highlight Remove Target on the Navigation X-Press^TMmenu.

1. Move the cursor to the desired position and press the MARK key once to save a waypoint.

2. Highlight Waypoint[Name] on the Navigation X-Press^TMmenu.

3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu.

2. Use the RIGHT 4-WAY Cursor Control key to remove the target.

Remove Grid

(only if a Grid is Active)

Remove Grid removes the waypoint grid from the display. This menu choice will only appear when

a grid has already been applied to a waypoint.

NOTE: See Add a Waypoint Target or Trolling Grid for more information.

Waypoint [Name] Submenu

To Remove a Grid:

1. Highlight Remove Grid on the Navigation X-Press^TMmenu.

The Waypoint Submenu contains the following menu choices:

2. Use the RIGHT 4-WAY Cursor Control key to remove the grid.

Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be

used to represent the waypoint in the Chart and Combo Views.

Sonar Window

(Combo view only)

Delete allows you to delete a waypoint from the list of saved waypoints.

Go To allows you to select a waypoint and start navigation toward that waypoint, or add that

waypoint to the end of the current route.

Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be

accessed from the Combo View.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

To Set the Size of the Sonar Window in the Combo View:

1. Highlight Sonar Window on the Navigation X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window.

(Wide, Medium, Narrow, Default = Medium)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 60

Screen Snapshot X-Press^TMMenu

Sonar Menu Tab

Press the MENU key twice to access the Main Menu System and

then press the RIGHT Cursor key to select the Sonar tab.

(Screen Snapshot View only)

The Screen Snapshot X-Press^TMmenu provides access to the

Delete Image and Delete All Images functions. Press the MENU

NOTE: Menu choices will vary depending on system settings such

as whether the unit is set for Advanced User mode or what

transducer is currently selected.

key once while in the Screen Snapshot View to access the

Screen Snapshot

Screen Snapshot X-Press^TMmenu.

X-Press^TMMenu

Delete Image

(optional-purchase MMC/SD Card, Screen Snapshot view only)

Delete Image allows you to delete a single screen capture image from the Screen Snapshot View.

This menu option is only available when you have an optional-purchase MMC/SD card installed

and you are in Screen Snapshot view.

To delete an image:

1. On the Screen Snapshot View, use the UP and DOWN 4-Way Cursor keys to select the

image you want to delete.

2. Highlight Delete Image on the Screen Snapshot X-Press™ menu.

3. Press the RIGHT 4-Way Cursor key to initiate this procedure.

4. A Confirm Dialog box will appear. Select Yes to delete the image or No to cancel the

operation.

Sonar Menu

Delete All Images

(optional-purchase MMC/SD Card, Screen Snapshot view only)

Delete All Images allows you to delete all the images at once from the Screen Snapshot View. This

menu option is only available when you have an optional-purchase MMC/SD card installed and

you are in Screen Snapshot view.

To delete all images:

1. From the Screen Snapshot View, highlight Delete All Images on the Screen Snapshot

X-Press™ Menu.

2. A confirmation dialog box will ask if you want to delete all images. Select Yes to delete,

or No to change your mind.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 62

Beam Select

Beam Select sets which sonar returns from the transducer

Fish ID+^TM

Fish ID+^TMuses advanced signal processing to interpret sonar

returns, and will display a Fish Symbol when very selective requirements are met. When a fish is

detected, a fish icon and its depth are displayed above the return that has been classified as being

a fish. Three different fish size icons represent the intensity of the sonar return, and provide an

indicator of relative fish size.

will be displayed on the screen.

When set to 200/83 kHz, the returns from both beams are blended by starting with the 83 kHz

wide beam return, dimming it, and then overlaying it with the 200 kHz narrow beam return. The

darker 200 kHz wide beam sonar returns will stand out from the paler 83 kHz narrow beam sonar

returns. The Split Sonar View continues to display the sonar returns from each beam in their

respective windows. The blended information is shown in the Sonar View, Sonar Zoom View and

the Big Digits View. The RTS® Window in the Sonar View and the Circular Flasher View will only

show the returns from the 200 kHz narrow beam.

Targets detected in the 200 kHz narrow beam are represented as Shaded Fish Symbols, and

targets detected in the 83 kHz wide beam are represented as Hollow Fish Symbols.

When set to 200 kHz, only the returns from the 200 kHz narrow beam will be displayed in the

Sonar View, the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The Split

Sonar View will continue to display returns from both beams in their respective windows. The

RTS® Window in the Sonar View will display the returns from the 200 kHz narrow beam.

200 kHz, Narrow Beam Shaded

Fish Symbols

83 kHz, Wide Beam

Hollow Fish Symbols

When set to 83 kHz, the returns from the 83 kHz wide beam will be displayed in the Sonar

View, the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The Split Sonar

View will continue to display returns from both beams in their respective windows. The RTS®

Window will display the returns from the 83 kHz wide beam.

To use Beam Select:

1. Highlight Beam Select on the Sonar main menu.

Transducer Cone and Fish Arches

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select either the 200 kHz beam, the

83kHz beam or the 200/83kHz beams. (200/83 kHz, 200 kHz, 83 kHz, Default = 200 kHz)

When Fish ID+TM is turned off, the Fishing System shows only the raw sonar returns on the

display. These returns will often result in "arches" forming on the display, indicating potential

targets. Due to the transducer beam angle, the distance to a fish decreases as the fish moves into

the beam, and then increases as it moves out again, creating a Fish Arch when this distance

change is shown on the display. Boat speed, chart speed, and the position of the fish within the

sonar beam greatly affect the shape of the arch.

To turn Fish ID+™ on or off:

1. Highlight Fish ID+ on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Fish ID+TM setting On or

Off. (Off, On, Default = Off)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 64

Fish ID Sensitivity

Zoom Width

Fish ID Sensitivity adjusts the threshold of the Fish ID+^TM

detection algorithms. Selecting a higher setting allows weaker returns to be displayed as fish.

This is useful for identifying smaller fish species or baitfish. Selecting a lower setting displays

fewer fish from weak sonar returns. This is helpful when seeking larger species of fish. Fish ID

Sensitivity is used in conjunction with Fish ID+^TM. Fish ID+^TMmust be On for Fish ID Sensitivity to

affect the ability of the Fishing System to identify sonar returns as fish.

Zoom Width adjusts the width of the Zoom window on the

Sonar Zoom View.

To change the Zoom Width Setting:

1. Highlight Zoom Width on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom Width setting.

(Narrow, Medium, Wide, Default = Wide)

To change the Fish ID Sensitivity setting:

1. Highlight Fish ID Sensitivity on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Sensitivity setting.

(Low = 1, High = 10, Default = 5)

83 kHz Sensitivity

(Advanced)

83 kHz Sensitivity changes the sensitivity of the 83 kHz beam. Increasing the 83 kHz Sensitivity

will display additional weak returns and decreasing the 83 kHz Sensitivity will display fewer weak

returns. The 83 kHz Sensitivity menu choice is only available when User Mode is set to Advanced

(see Setup Menu Tab: User Mode).

Real Time Sonar (RTS®) Window

RTS® Window sets the RTS® Window to either Wide or

Narrow, or turns it off in the Sonar View. The RTS® Window always updates at the fastest rate

possible and only displays returns that are within the transducer beam. (See Real Time Sonar

(RTS®) Window for additional detail).

NOTE: 83 kHz Sensitivity is particularly useful for adjusting the sensitivity of the 83 kHz sonar

returns in the 200/83 kHz Split Sonar View. The 83 kHz sensitivity can be adjusted without affecting

the sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.

To set the 83 kHz Sensitivity:

1. Make sure you are in Advanced User Mode, then highlight 83 kHz Sensitivity on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to set the 83 kHz Sensitivity.

(-10 to +10, Default = 0)

RTS® Window (Wide)

RTS® Window (Narrow)

RTS® Window (Off)

To change the RTS® Window setting:

1. Highlight RTS Window on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the RTS® Window setting.

(Wide, Narrow, Off, Default = Wide)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 66

455 kHz Balance

(Advanced)

Depth Lines

(Advanced)

455 kHz Balance adjusts the sensitivity of the 455 kHz beam. Increasing the sensitivity will display

additional weak returns and decreasing the sensitivity will display fewer weak returns. A

QuadraBeam™ transducer must be attached to the 700 Series™ Fishing System. The 455 kHz

Balance menu choice is only available when User Mode is set to Advanced (see Setup Menu Tab:

User Mode).

Depth Lines divide the display into four equal sections which are separated by three horizontal

depth lines. The depth of each line is displayed along the depth scale. You can either turn Depth

Lines On or Off. The Depth Lines menu choice is available when User Mode is set to Advanced (see

Setup Menu Tab: User Mode).

NOTE: 455 kHz Balance is particularly useful for adjusting the sensitivity of the 455 kHz sonar

returns in the Side Beam View. The 455 kHz sensitivity can be adjusted without affecting the

sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.

Depth

Lines

To change the 455 kHz Balance setting:

1. Make sure you have selected QuadraBeam^TMTransducer and Advanced Mode, then

highlight 455kHz Balance on the Sonar Main Menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the 455 kHz Balance.

(-10 to +10, Default = 0)

WideSide® Sensitivity

(Advanced: with WideSide® transducer)

WideSide® Sensitivity adjusts the sensitivity of the WideSide® beam. Increasing the sensitivity

will display additional weak returns and decreasing the sensitivity will display few weak returns. A

WideSide® transducer must be attached to the 700 Series™ Fishing System. The WideSide®

Sensitivity menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu

Tab: Transducer Select) and User Mode is set to Advanced (see Setup Menu Tab: User Mode).

To change the Depth Lines setting:

1. Make sure you are in Advanced User Mode, then highlight Depth Lines on the Sonar

main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth Lines setting On or

Off. (Off, On, Default = On)

NOTE: The WideSide® Sensitivity requires the purchase of the WideSide® transducer. You can visit

our website at www.humminbird.com to order this accessory online or contact our Customer

Resource Center at 1-800-633-1468.

NOTE: WideSide® Sensitivity is particularly useful for adjusting the sensitivity of the 455 kHz sonar

returns in the WideSide® View. The 455 kHz sensitivity can be adjusted without affecting the

sensitivity of the other sonar frequencies.

To change the WideSide® Sensitivity setting:

1. Make sure you have selected WideSide® Transducer and Advanced Mode and that the

WideSide® transducer is connected, then highlight WideSide® Sensitivity on the Sonar

Main Menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the WideSide® Sensitivity.

(-10 to +10, Default = 0)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 68

Surface Clutter

(Advanced)

Noise Filter

(Advanced)

Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and aeration.

The lower the setting, the less surface clutter will be displayed. The Surface Clutter menu choice is

available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

Noise Filter adjusts the sonar Noise Filter to limit interference on the display from sources such as

your boat engine, turbulence, or other sonar devices. The Noise Filter menu choice is available when

User Mode is set to Advanced (see Setup Menu Tab: User Mode).

NOTE: The Off setting removes all filtering; Low, Medium and High settings add progressive

filtering of the sonar returns. In some deep water situations, the High setting may actually hinder

your unit’s ability to find the bottom.

Surface

Clutter

To change the Noise Filter setting:

1. Make sure you are in Advanced User Mode, then highlight Noise Filter on the Sonar main

menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Noise Filter setting.

(Off, Low, Medium, High1, High2, High3, Default = Low)

Max Depth

(Advanced)

Max Depth adjusts the maximum depth of operation. The performance of your Fishing System can

be tuned to the maximum depth you will be fishing in by setting the Max Depth. When a maximum

depth is set, your Fishing System will not attempt to acquire sonar data below that depth, thus

increasing overall performance. When Max Depth is set to Auto, the Fishing System will acquire

bottom readings as needed (within the capacity of the unit). If the bottom is deeper than the Max

Depth setting, the digital depth readout will flash, indicating that the Fishing System cannot locate

the bottom. The Max Depth menu choice is available when User Mode is set to Advanced (see Setup

Menu Tab: User Mode).

To change the Surface Clutter setting:

1. Make sure you are in Advanced User Mode, then highlight Surface Clutter on the Sonar

main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Surface Clutter setting.

(Low = 1 to High = 10, Default = 5)

To change the Max Depth setting:

1. Make sure you are in Advanced User Mode, then highlight Max Depth on the Sonar main

menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Max Depth setting.

(AUTO, 10 to 1500 feet, 3 to 500 meters [International Models only], Default = AUTO)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 70

Water Type

(Advanced)

Navigation Menu Tab

(with optional-purchase GPS receiver)

Water Type configures your unit for operation in fresh or salt water. The Water Type menu choice

is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

Press the MENU key twice to access the Main Menu System, then press

the RIGHT cursor key to select the Navigation tab.

NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger than a

large fish in fresh water (depending on the type of fish you are seeking). The salt water setting

allows for a greater range in fish size adjustment to account for this. Also, make sure that the

Water Type is set accurately, especially in salt water, as this affects the accuracy of deep water

depth readings.

NOTE: The Navigation menu tab will only appear if you have an

optional-purchase GPS receiver connected.

NOTE: Menu choices will vary depending on system settings.

To change the Water Type setting:

1. Make sure you are in Advanced User Mode, then highlight Water Type on the Sonar main

menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water Type setting.

(Fresh, Salt, Default = Fresh)

Transducer Select

Transducer Select allows you to select which transducer you

want to use (the 700 Series™ Fishing System comes with a DualBeam PLUS™ QuadraBeam™

transducer, and also supports the optional-purchase WideSide® transducer.)

Navigation Menu Tab

To change the selected Transducer:

1. Highlight Transducer Select on the Sonar Main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the transducer selected.

(QuadBeam, WideSide, Default = QuadBeam)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 72

Current Track

Waypoints

Current Track allows you to view the Current Track submenu.

Waypoints allows you to view the Waypoints submenu.

To view the Current Track Submenu:

To view the Waypoints Submenu:

1. Highlight Current Track on the Navigation main menu.

1. Highlight Waypoints on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the

Current Track submenu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Waypoints submenu.

Current Track Submenu

Waypoints Submenu

The Current Track Submenu contains the following menu choices:

Save Current Track allows you to save the current track.

Clear Current Track allows you to clear the current track.

The Waypoints Submenu contains the following menu choices:

Create allows you to create a new waypoint and edit it immediately. The current boat position will

be used as the default, but you can set the coordinates to any valid position. The Icon used to

represent the waypoint in the Chart and Combo Views can also be changed.

Appearance allows you to change the style and color of the current track. (Breadcrumb Trail,

Dashed Line, or Solid Line, and if a line, the color of the line, from light to dark gray to black).

Edit allows you to choose from a list of previously-saved waypoints, then edit the Name, Position

(Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the

Chart and Combo Views.

Saved Tracks

Saved Tracks allows you to view the Saved Tracks submenu.

Delete allows you to delete a waypoint from the list of saved waypoints.

To view the Saved Tracks Submenu:

Cursor To allows you to move the cursor quickly to a waypoint selected from the list of saved

waypoints.

1. Highlight Saved Tracks on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Saved Tracks submenu.

Go To allows you to select a waypoint and start navigation toward that waypoint, or add that

waypoint to the end of the current route.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

Saved Tracks Submenu

The Saved Tracks Submenu contains the following menu choices:

Edit allows you to select a previously-saved track and edit its name, whether it is visible or not, and

its appearance.

Delete allows you to delete a track from a list of previously-saved tracks.

Default sets the appearance of the track created by selecting Save Current Track.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 74

Routes

North Reference

Routes allows you to view the Routes submenu.

North Reference allows you to have bearings displayed with

one of two orientations: True North or Magnetic North.

To view the Routes Submenu:

To change the North Reference setting:

1. Highlight Routes on the Navigation main menu.

1. Highlight North Reference on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Routes submenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the North Reference setting.

(True, Magnetic, Default = True)

Grid Rotation

Routes Submenu

Grid Rotation allows you to set the orientation of the trolling

grid in degrees, where a setting of 0° displays a standard North, South, East, West alignment. See

Waypoints for information on how to set a Grid.

The Routes Submenu contains the following menu choices:

Create allows you to create a new, empty route and add waypoints to it immediately.

Edit allows you to select a previously-saved route and edit its name and the waypoints on it.

Delete allows you to delete a route from a list of previously-saved routes.

To change the Grid Rotation setting:

1. Highlight Grid Rotation on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Grid Rotation setting. (0°

to 89°, Default = 0°)

Travel allows you to select a previously-saved route to use as the current route; this menu setting

also begins navigation on this route. Routes can be traveled in either the forward or reverse

direction.

Trackpoint Interval

Info displays information about the route, including the distance and bearing from each

waypoint to the next.

Trackpoint Interval allows you to select the time period

between trackpoints. The current track can only contain up to 2000 trackpoints, so longer time

periods cause the track to extend back further in time, but will be less detailed.

Chart Orientation

NOTE: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions must be

met before a trackpoint is added to the current track.

Chart Orientation allows you to select whether the Chart and

Combo Views should be drawn North-Up or Course-Up.

To change the Trackpoint Interval setting:

To change the Chart Orientation setting:

1. Highlight Trackpoint Interval on the Navigation main menu.

1. Highlight Chart Orientation on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Trackpoint Interval

setting. (1 second, 5 seconds, 10 seconds, 15 seconds, 30 seconds or 60 seconds,

Default = 15 seconds)

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Orientation setting.

(North-Up, Course-Up, Default = North-Up)

NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small

values will allow you to increase the track resolution.

NOTE: The Chart Orientation setting does not apply to the Bird's Eye View.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 76

Track Min Distance

Course Projection Line

Course Projection Line allows you to display or hide an arrow

extending from the bow of the boat that projects your current course, and shows where the boat

will go if you continue on your present course.

(Advanced)

Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added to

the track. The Track Min Distance menu choice is only available when User Mode is set to

Advanced (see Setup Menu Tab: User Mode).

To change the Course Project Line setting:

NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be

met before a trackpoint is added to the current track.

1. Highlight Course Projection Line on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Course Projection Line

setting (Hidden, Visible, Default = Hidden)

To change the Track Minimum Distance setting:

1. Make sure you are in Advanced User Mode, then highlight Track Min Distance on the

Navigation main menu.

Export All Nav Data

(Advanced)

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Track Min Distance

setting. (1 to 300 feet or 1 to 100 meters [International Units only], Default = 16 ft, 5 m)

Export All Nav Data allows you to export all saved Tracks, Waypoints and Routes to an MMC/SD

card. The Export All Nav Data menu choice is only available when User Mode is set to Advanced

(see Setup Menu Tab: User Mode).

NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small

values will allow you to increase the track resolution.

To Export All Navigation Data:

Map Datum

(Advanced)

1. Make sure you are in Advanced User Mode, and that an optional-purchase MMC/SD card

is installed in the slot, then highlight Export All Nav Data on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control key to export all navigation data. A confirmation

dialog box will appear to allow you to change your mind, and to confirm your choice.

If no MMC card is installed, and error message will be displayed. Insert the MMC card

and try again.

Map Datum allows you to change the map coordinate system used by the 700 Series™ Fishing

System to match those of a paper map. The Map Datum menu choice is only available when User

Mode is set to Advanced (see Setup Menu Tab: User Mode).

To change the Map Datum setting:

1. Make sure you are in Advanced User Mode, then highlight Map Datum on the Navigation

main menu.

Delete All Nav Data

(Advanced)

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum setting.

(Default = WGS 84)

Delete All Nav Data allows you to delete all saved Tracks, Waypoints and Routes. This menu choice

should be used with caution. The Delete All Nav Data menu choice is only available when User

Mode is set to Advanced (see Setup Menu Tab: User Mode).

To Delete All Navigation Data:

1. Make sure you are in Advanced User Mode, then highlight Delete All Nav Data on the

Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control key to delete all navigation data.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 78

Chart Menu Tab

Chart Detail Level

(with optional-purchase GPS Receiver only)

Chart Detail Level allows you to select how much chart detail

you want displayed on the Navigation Views. Basic shows land areas, ports, obstructions and

restricted areas. Navigation shows navaids, landmarks, ferryways and navigation routes in

addition to the Basic information. Underwater shows depth contours, fishing areas, underwater

wrecks, tides and currents in addition to the Basic and Navigation information. All shows roads,

buildings, railways, and other notations in addition to the Basic, Navigation and Underwater

information.

Press the MENU key twice to access the Main Menu System

and then press the RIGHT Cursor key to select the Chart tab.

NOTE: Menu choices will vary depending on system settings

such as whether the unit is set for Advanced User mode.

NOTE: The Navigation menu tab will only appear if you have

an optional-purchase GPS receiver connected.

To change the Chart Detail Level setting:

1. Highlight Chart Detail Level on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Detail Level setting.

(Basic, Navigation, Underwater, All, Default = All)

Chart Menu

NOTE: Some chart details are only available with optional-purchase MMC/SD cards.

Map Borders

Map Borders allows you to display or hide map borders. A

Map Border indicates an area which contains a different map.

Map Borders

To change the Map Borders setting:

1. Highlight Map Borders on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Borders setting.

(Hidden, MMC/SD Only, All Visible, Default = Hidden)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 80

Lat/Lon Grid

Lat/Lon Grid allows you to display or hide a grid showing

Set Map Offset

(Advanced)

latitude and longitude lines.

Set Map Offset allows you to change the map offset used by the 700 Series™. The Set Map

Offset menu choice is only available when User Mode is set to Advanced (see Setup Menu Tab:

User Mode).

To change the Lat/Lon Grid setting:

1. Highlight Lat/Lon Grid on the Chart main menu.

NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction.

The Map Offset should be cleared if a different map is to be used.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid setting.

(Hidden, Visible, Default = Hidden)

To change the Map Offset setting:

1. Activate the cursor and move it to the location where the Map Offset will be applied.

NOTE: The cursor must be active in order for this procedure to work.

Spot Soundings

Spot Soundings allows you to display or hide spot soundings,

which are depth measurements shown on the chart.

2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on the Chart

main menu.

NOTE: Spot Soundings are only available with optional-purchase MMC/SD cards.

3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset. A confirmation dialog box

will appear to allow you to change your mind, or to confirm your choice. If the cursor was

not active before you began this procedure, you will see an error message. Exit the menu,

set the cursor, then try again.

To change the Spot Soundings setting:

1. Highlight Spot Soundings on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Spot Soundings setting.

(Hidden, Visible, Default = Hidden)

Clear Map Offset

(Advanced)

Set Simulation Position

Clear Map Offset allows you to clear the Map Offset. The Clear map Offset menu choice is only

available when User Mode is set to Advanced (see Setup Menu Tab: User Mode) and a Map Offset

is currently active.

(Advanced)

Set Simulation Position allows you to set the position of the boat used in the Simulator. The Set

Simulation Position menu choice is only available when User Mode is set to Advanced (see Setup

Menu Tab: User Mode).

To Clear Map Offset:

1. Make sure you are in Advanced User Mode, then highlight Clear Map Offset on the Chart

main menu.

To set the Simulation Position:

1. Activate the cursor and move it to the coordinates from where you want the simulation

to start.

2. Use the RIGHT 4-WAY Cursor Control key to clear the Map Offset.

NOTE: The cursor must be active in order for this procedure to work.

2. Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the

Chart main menu.

3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting. A

confirmation dialog box will appear to allow you to change your mind, or to confirm your

choice. If the cursor was not active before you began this procedure, you will see an error

message. Exit the menu, set the cursor, then try again.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 82

Alarms Menu Tab

Depth Alarm

From any view, press the MENU key twice to access the Main

Menu System. The Alarms tab will be the default selection.

Depth Alarm sounds when the depth becomes equal to or

less than the menu setting.

NOTE: When an alarm is triggered, you can silence it by pressing

any key. The alarm will be silenced, and will not be triggered

again until a new instance of the alarm condition is detected.

To change the Depth Alarm setting:

1. Highlight Depth Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting.

(OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)

NOTE: Off Course Alarm, Arrival Alarm, and Drift Alarm menu

choices will only appear if you have purchased and connected a

GPS Receiver.

Fish ID Alarm

Fish ID Alarm sounds when the Fishing System detects fish

that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+^TMis on.

Alarms Menu

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish

ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1. Highlight Fish ID Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting.

(Off, All, Large/Medium, Large, Default = Off)

Off

Large

Large/Medium

All

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 84

Low Battery Alarm

Off Course Alarm

Low Battery Alarm sounds when the input battery voltage

is equal to or less than the menu setting. The battery alarm will only sound for the battery that

is connected to the 700 Series™ Fishing System. The Low Battery Alarm should be set to warn

you when the battery voltage drops below the safety margin that you have determined. For

instance, if you are running a trolling motor (battery operated), you would want to set the Low

Battery Alarm to sound before the battery voltage drops too low for it to be used to start your

main, gasoline-powered engine.

Off Course Alarm sounds when the boat has moved too far off

course based on the menu setting when navigating. Off Course Alarm allows you to set how far

the boat is allowed to move off course before the Off Course Alarm will sound.

Off Course Limits

To change the Low Battery Alarm setting:

1. Highlight Low Battery Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm

setting. (Off, 8.5V - 13.5V, Default = Off)

Arrival Alarm Circle

Temp Alarm

To change the Off Course Alarm setting:

Temp Alarm sounds when the water temperature detected

by the 700 Series™ reaches the Temp Alarm setting, which is either set in degrees Fahrenheit

or Celsius [International Models only]. For example, if the Temp Alarm is set to 58 degrees

Fahrenheit, and the water temperature falls from 60 degrees to 58 degrees, the Temp Alarm

will sound. Similarly, if the water temperature rises from 56 degrees to 58 degrees, the Temp

Alarm will also sound.

1. Highlight Off Course Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm

setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default =

300 ft, 100 m)

To change the Temp Alarm setting:

Arrival Alarm

(with optional-purchase GPS receiver)

1. Highlight Temp Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm setting.

(Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)

Arrival Alarm sounds when the boat has either exceeded the distance to the destination

waypoint, or has entered the Arrival Alarm Circle, based on the menu setting when navigating,

and will only appear in the Alarms menu when an optional-purchase GPS receiver is connected.

Arrival Alarm allows you to set how close the boat must be to the destination waypoint before the

Arrival Alarm will sound.

To change the Arrival Alarm setting:

1. Highlight Arrival Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting. (Off,

25 to 3000 feet, 10 to 1000 meters [International Models only], Default = 150 ft, 50 m)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 86

Drift Alarm

Setup Menu Tab

From any view, press the MENU key twice to access the tabbed

Main Menu System, then press the RIGHT cursor key until the

Setup tab is selected.

(with optional-purchase GPS receiver)

Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position,

based on the menu setting, and will only appear in the Alarms menu when an optional-purchase

GPS receiver is connected. Drift Alarm allows you to set the size of a perimeter around the boat’s

anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm will sound.

NOTE: Menu choices will vary depending on system settings such

as whether the unit is set for Advanced User mode and what

accessories are attached to the unit.

Drift Alarm Circle

Drift Alarm Perimeter

To change the Drift Alarm setting:

1. Highlight Drift Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting.

(Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default = Off)

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A brief tone

will be produced as you adjust the Alarm Tone so that you can select the tone that you can hear

best.

Setup Menu Tab

To change the Alarm Tone setting:

1. Highlight Alarm Tone on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting.

(High, Medium, Low, Default = Medium)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 88

Units - Depth

Units - Depth selects the units of measure for all depth-

Units - Speed

(with Temp/Speed or optional-purchase GPS receiver)

related readouts.

Units - Speed selects the units of measure for speed-related readouts, and will appear in the

menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, or

if an optional-purchase GPS Receiver is connected.

To change the Units - Depth setting:

1. Highlight Units - Depth on the Setup menu.

To change the Units - Speed setting:

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting.

(Meters [International Models only], Feet, Fathoms; Default is Meters for International

models, and Feet for Domestic models)

1. Highlight Units - Speed on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting.

(kph [International Models only], mph, kts, Default = kph for International models and

mph for Domestic models)

Units - Temp

(International only)

User Mode

Units - Temp selects the units of measure for all temperature-related readouts. International

Models only.

User Mode sets the menu system to either Normal or

Advanced. When set to Normal (default setting,) only the basic menu options are shown. When

set to Advanced, additional menu choices are available.

To change the Units - Temp setting:

1. Highlight Units - Temp on the Setup menu.

To change the User Mode setting:

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting.

(Celsius, Fahrenheit; Default = Celsius)

1. Highlight User Mode on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting.

(Normal, Advanced, Default = Normal)

Units - Distance

(with Temp/Speed or optional-purchase GPS receiver)

Units - Distance selects the units of measure for all distance-related readouts, and will appear in

the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once,

or if an optional-purchase GPS Receiver is connected.

Language

(International only)

Language selects the display language for menus. International Models only.

To change the Units - Distance setting:

To change the Language setting:

1. Highlight Units - Distance on the Setup menu.

1. Highlight Language on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting.

(Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International

Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical

Miles; Default = Meters/Kilometers)

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting.

(Default = English)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 90

Triplog Reset

(with Temp/Speed or optional-purchase GPS receiver)

Select Readouts

(Advanced, Sonar view only)

Select Readouts sets individual digital readouts on the

Sonar View. This Advanced feature allows you to select

what data will be displayed in each of 6 fixed-position data

windows arranged around the left and bottom edges of

the Sonar View screen, or whether a particular window

will be turned off, displaying nothing in that area; you can

access this menu choice only when in Advanced User

Mode (see Setup Menu Tab: User Mode.)

Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed Accessory is

connected and the paddlewheel has moved at least once, or if an optional-purchase GPS Receiver

is connected. The Triplog provides the following information: timer for elapsed time, distance

traveled since last reset, and average speed.

NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog

information on the screen.

To Reset Triplog:

Data windows can display readouts from supported

accessories such as Temp/Speed. Each data window can

either be empty or contain one of the following:

1. Highlight Reset Triplog on the Setup menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.

3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once

more. To cancel Reset Triplog, press the LEFT Cursor key.

• Course

• Temperature

• Time + Date

• Triplog

Select Readouts

• Navigation

• Position

• Speed

• Voltage.

Restore Defaults

Restore Defaults resets ALL menu settings to their factory

defaults. Use this menu choice with caution!

To Restore Defaults:

1. Highlight Restore Defaults on the Setup menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.

3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key

once more. To cancel Restore Defaults, press the LEFT Cursor key.

Customized Sonar View

Default Sonar View

To Select Readouts:

1. Make sure you are in Advanced User Mode, then highlight Select Readouts on the

Setup main menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.

3. The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP or

DOWN Cursor keys to select a particular Readout position, then use the RIGHT or LEFT

Cursor keys to change what will be displayed at that position. (Course, Navigation,

Position, Off, Speed, Temperature, Time+Date, Triplog, Voltage)

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 92

Local Time Zone

(Advanced, with optional-purchase GPS receiver only)

Depth Offset

(Advanced)

Local Time Zone selects your time zone in reference to the time reported by the GPS receiver when

Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). This menu

choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode) and when

an optional-purchase GPS receiver is connected.

Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat's

keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth

from the waterline. Enter a negative vertical measurement from the transducer to keel to read the

depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup

Menu Tab: User Mode.)

To change the Local Time Zone:

To change the Depth Offset setting:

1. Make sure you are in Advanced User Mode, and have an optional-purchase GPS receiver

connected, then highlight Local Time Zone on the Setup menu.

1. Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone

(Default = EST [UTC-5] - Eastern Standard Time).

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting.

(-10.0 to +10.0 feet or -3 to 3 meters [International Models only], Default = 0)

Daylight Saving Time

(Advanced, with optional-purchase GPS receiver only)

Temp Offset

(Advanced)

Daylight Saving Time adjusts the time display to account for local Daylight Saving Time when

Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). Selecting On adds

one hour to the time display adjusted for your local time zone. Selecting Off leaves the time display as

adjusted for your local time zone. This menu choice is available only when in Advanced User Mode (see

Setup Menu Tab: User Mode) and when an optional-purchase GPS receiver is connected.

Temp Offset will adjust the temperature readout by the amount entered. This menu choice is

available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Temp Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup

menu.

To change the Daylight Saving Time setting:

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset setting.

(-10.0 to +10.0 degrees, Default = 0)

1. Make sure you are in Advanced User Mode, and have an optional-purchase GPS receiver

connected, then highlight Daylight Saving Time on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time On or Off.

(Off, On, Default = Off)

Speed Calibration

(Advanced, with Temp/Speed only)

Position Format

Speed Calibration will adjust the speed readout by the percentage entered, and will appear in the

menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, when

the unit is in Advanced User Mode (see Setup Menu Tab: User Mode.)

(Advanced, with optional-purchase GPS receiver)

Position Format selects the format of the latitude and longitude position display. This menu

choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode) and an

optional-purchase GPS Receiver is connected.

To change the Speed Calibration setting:

1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on the

Setup menu.

To change the Position Format setting:

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed Calibration setting.

(-20% to +20%, Default = 0%)

1. Make sure you are in Advanced User Mode, then highlight Position Format on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.

(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 94

Time Format

(Advanced, International and optional-purchase GPS receiver only)

NMEA Output

(Advanced)

NMEA Output turns the NMEA* output on or off. This menu choice is available only when in

Advanced User Mode (see Setup Menu Tab: User Mode). NMEA Output should be turned On if you

connect the NMEA Output wires of the optional-purchase GPS Receiver cable to another NMEA-

compatible device, such as an autopilot.

Time Format changes the time format used by the unit This menu choice is available only when in

Advanced User Mode (see Setup Menu Tab: User Mode) and when an optional-purchase GPS receiver is

connected. International Models only. Time Format selects a 12 hour or 24 hour format for the time of day

displayed when Time + Date is selected as a Digital Readout on the Sonar View (see Select Readouts).

The following NMEA sentences are output when NMEA Output is turned On:

To change the Time Format:

DPT- Depth

MTW - Water Temperature

GLL - Lat/Lon Position

1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup

menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12 hour,

24 hour, Default = 12 hour)

GGA - GPS Fix Data

RMC - Recommended Minimum Specific GNSS Data

VTG - Course Over Ground and Ground Speed

ZDA - Time and Date

Date Format

(Advanced, International and optional-purchase GPS receiver only)

When navigating, the following NMEA sentences are also output when NMEA Output is turned On:

APB - Autopilot Sentence B

BWR - Bearing and Distance to Waypoint

RMB - Recommended Minimum Navigation Info

Date Format changes the date format used by the unit This menu choice is available only when in

Advanced User Mode (see Setup Menu Tab: User Mode) and when an optional-purchase GPS receiver

is connected. International Models only. Date Format selects the format for the date display when

Time + Date is selected as a Digital Readout on the Sonar View. (see Select Readouts).

To turn NMEA Output on or off:

1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup

menu.

To change the Date Format:

1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup

menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or

Off (On, Off, Default = Off).

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format.

(mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)

*NMEA 0183 is a National Marine Electronics Association standard for data communication.

Sonar

Sonar deactivates Sonar and removes the Sonar Views from the

view rotation. (Off, On, Default = On)

To turn Sonar on or off:

1. Highlight Sonar on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Sonar to On or Off (Off,

On, Default = On).

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 96

Views Menu Tab

Accessories Menu Tab

From any view, press the MENU key twice to access the tabbed

Main Menu System, then press the RIGHT 4-WAY Cursor Control

key until the Views tab is selected. This menu tab allows you to

set the available views to either hidden or visible in the view

rotation. The view will be removed from the view rotation if it

is set to Hidden and will be displayed in the view rotation if it is

set to Visible. The following views are available:

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the

RIGHT cursor key until the Accessories tab is selected.

f no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the

Accessories tab, only the Screen Snapshot menu choice. If an accessory is attached, however,

additional menu choices that support the accessory will be added automatically. See the

Operations Manual that comes with your accessory for detailed information.

• Bird’s Eye View (with optional-purchase GPS receiver)

• Chart View (with optional-purchase GPS receiver)

• Combo View (with optional-purchase GPS receiver)

• WideSide® View (with optional-purchase WideSide® transducer)

• Side Beam View

Accessories Menu Tab

(no accessories attached)

Accessories Menu Tab

• Sonar View

(with accessories attached)

• Sonar Zoom View

• 200/83 kHz Split Sonar View

• Big Digits View

NOTE: Accessories to enable WeatherSense®, GPS Functionality and the SmartCast® Wireless Sonar

Link require separate purchases. You can visit our website at www.humminbird.com or contact our

Customer Resource Center at 1-800-633-1468 for additional details.

• Circular Flasher View

• Screen Snapshot View

• Self Test

Using Screen Snapshot

• Accessory Test

Screen Snapshot activates the screen snapshot function.

When Screen Snapshot is enabled, pressing the MARK key creates a saved screen capture on the

optional-purchase MMC/SD card installed in your unit’s card slot. All menus, dialog boxes,

warnings and messages are captured and saved automatically. You can view these captures on the

Screen Snapshot View, which shows thumbnails of the screen captures, three at a time.

Views Menu

• GPS Diagnostic View (with optional-purchase GPS receiver).

NOTE: The Bird's Eye, Chart, Combo and GPS Diagnostic views require the purchase of the GPS

receiver. You can visit our website at www.humminbird.com to order this accessory online or

contact our Customer Resource Center at 1-800-633-1468.

NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot feature

to work.

To Change the View Status of Any View:

1. Highlight the View main menu tab.

To turn Screen Snapshot on or off:

2. Use the UP or DOWN 4-WAY Cursor Control keys to select a View.

1. Highlight Screen Snapshot on the Accessories main menu.

3. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the view from

Hidden to Visible.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Screen Snapshot On or Off (Off,

On, Default = Off).

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 98

To make a screen snapshot (Screen Snapshot must be enabled):

Troubleshooting

1. Make sure you have installed an optional-purchase MMC/SD card into your card slot.

Before contacting the Humminbird®Customer Resource Center, please read the following section.

Taking the time to review these troubleshooting guidelines may allow you to solve a performance

problem yourself, and therefore avoid sending your unit back for repair.

2. From any view you want to capture, press the MARK key. When you start a screen

capture, you will see a message that a waypoint has been created at the point where

your cursor is on the screen, and the screen will freeze. A status dialog box will appear

that shows the progress of the save, and that displays the numbered filename assigned

to the .BMP file that is being created, along with the percentage completed status.

700 Series™ Doesn’t Power Up

If your 700 Series™ doesn’t power up, use the Installation Guide that also comes with it for specific

confirmation details, making sure that:

NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen Sanpshot is enabled

but there is no GPS receiver connected, pressing the MARK key will capture the screen image and

display an error saying that a GPS position fix is required to create a waypoint.

•

the power cable is properly connected to the 700 Series™ control head,

the power cable is wired correctly, with red to positive battery terminal and black to

negative terminal or ground

NOTE: The speed of the capture depends on the type of card you use; in general, SD cards capture

the screen faster than MMC cards do.

•

the fuse is operational

To view screen snapshots:

the battery voltage of the power connector is at least 10 Volts.

1. Make sure that the optional-purchase MMC/SD card used to capture the screens is

installed in your card slot.

Correct any known problems, including removing corrosion from the battery terminals or wiring,

or actually replacing the battery if necessary.

2. Press the VIEW key until you see the Screen Snapshot View.

3. The Screen Snapshot View displays up to three thumbnails of these screen captures at a

time. You can scroll through the whole list of thumbnails of screen captures in this view

using the 4-WAY Cursor keys. The selected thumbnail will be highlighted with arrows.

See the full-sized image by selecting a thumbnail (using the Up or Down 4-Way Cursor

keys), then using the Right 4-Way Cursor key to view the full image. A border around the

full-size screen capture indicates that it is just a screen capture, not a “live” view. You can

delete the selected image, or all captured images, using Delete Image or Delete All

Images from the Screen Snapshot X-Press™ menu. (See Screen Snapshot X-Press™ menu:

Delete Image and Delete All Images for more information).

700 Series™ Defaults to Simulator with a Transducer Attached

A connected and functioning transducer will cause the newly-started Fishing System to go into

Normal operating mode automatically. If, when you power up the Fishing System, it goes into

Simulator mode automatically, even though a transducer is already connected, this means that

the control head is not detecting the transducer. Perform the following troubleshooting tasks:

•

Using the Installation Guide that also comes with your Fishing System, check to make

sure that the transducer cable is securely connected to the Fishing System. Reconnect if

necessary, and power up the Fishing System again to see if this fixes the problem.

NOTE: You may view data files associated with each screen snapshot by removing the MMC/SD

card from your unit and installing it in your optional-purchase MMC/SD card reader connected to

a PC. Use Windows Explorer to see the contents of your MMC/SD card; you will notice that a .DAT

(may show up as .TXT) file is created for every .BMP screen capture; this data file includes the

thumbnail view, and is required in order to be able to view the screen snapshot from your 700 series

unit, so don’t delete these files.

•

Replace the non-functioning transducer with a known good transducer if available and

power up the control head again.

Check the transducer cable. Replace the transducer if the cable is damaged or corroded.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 100

Display Problems

Finding the Cause of Noise

There are several main conditions or sources of possible interference that may cause problems

with the quality of the information displayed on the control head. Look in the following table for

some symptoms of display problems and possible solutions:

Electrical noise usually affects the display with many black dots at high speeds, and high

sensitivity readings. One or more of the following sources can cause noise or interference:

Possible Source of Noise

Other electronic devices

Isolation

Problem

Possible Cause

Turn off any nearby electronic devices to see if the

problem goes away, then turn them on one at a time to

see if the noise re-appears.

The control head loses power

at high speeds.

If the power output of your boat’s engine is

unregulated, the control head may be protecting itself

using its over-voltage protection feature. Make sure the

input voltage does not exceed 20 Volts.

The boat’s engine

To determine whether the boat’s engine is the source

of the noise, increase the RPMs while the boat is in

neutral and stationary to see if the noise increases

proportionately; if noise appears when you rev the

engine, the problem could be the spark plugs, alternator,

or tachometer wiring. Replace the spark plugs with

resistor plugs, install an alternator filter, or route the

control head power and transducer cables away from the

engine wiring.

When the boat moves at

higher speeds, the bottom

disappears or suddenly

weakens, or the display

contains gaps.

The transducer position may need to be adjusted. A

mix of air and water flowing around the transducer

(cavitation) may be interfering with the interpretation

of sonar data. See your Installation Guide for

suggestions on adjusting the transducer position.

Electrical noise from the boat’s engine may be

interfering with sonar reception. See Finding the Cause

of Noise for more information.

Turbulence created by the propeller can cause noise;

make sure the transducer is mounted at least 15” (38 cm)

from the propeller, and that the water flows smoothly

over the face of the transducer at all times.

Cavitation from the boat’s

propeller

There are no fish detected,

even when you know they are

in the water under the boat,

or sonar readings seem weak

or faulty.

Sonar readings may be affected if the transducer is not

positioned correctly (i.e. mounted at an angle, not

straight down), or there is some kind of mechanical

interference, either because it is mounted inside a hull

that is too thick for proper sonar transmission, the bond

between the transducer and the hull is not airtight, or

because the transducer is dirty. Check with your

Installation Guide for guidance on re-positioning the

transducer, and make sure the transducer is clean.

Low battery voltage may be affecting the power of

signal transmission.

Electrical noise from the boat’s engine may be

interfering with sonar reception. See Finding the Cause

of Noise for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 102

700 Series™ Fishing System Accessories

Specifications

Accessories customize the 700 Series™ Fishing System to your needs and enable you to stay on

the edge of new technology. When an accessory is connected to the 700 Series™ Fishing System,

additional menus and readouts are added automatically to the Main Menu System. Accessories

available today that are supported by your Fishing System include:

Depth Capability ................................................................................................ 1500 ft (450 m)

Power Output .............................................. 500 Watts (RMS), 4000 Watts (Peak to Peak)

WideSide® transducer: purchase and connect the WideSide® transducer to your 700 Series™

Fishing System to access specialized "side looking" functions that are extremely useful for

bank fishing or looking for bait fish in open water.

Operating Frequency ........................................ 200 kHz/83 kHz/455 kHz QuadraBeam^TM

with DualBeam PLUS^TM

Temperature/Speed: purchase and plug in the Temperature/Speed accessory to your 700 Series™

control head to get real time speed and temperature readouts, as well as a valuable Triplog function.

Area of Coverage .................................................................................. 60° @ -10 dB in 83 kHz

20° @ -10 dB in 200 kHz

NOTE: If an external Temperature/Speed (TS-W) or Temperature (TG-W) accessory is connected

AND a transducer with temperature built in is connected at the same time, the TS-W or TG-W

accessory will override the temperature which is built in to the transducer.

90°Total Coverage (Two 45° Beams) @ -10 dB in 455 kHz

Target Separation ................................................................................ 2 1/2 Inches (63.5 mm)

Power Requirement .................................................................................................... 10-20 VDC

LCD Matrix .............................................................................................................. 640 V x 320 H

Transducer.................................................................................................................. XT-6-TB-90-T

Transducer Cable Length .......................................................................................... 20 ft (6 m)

WeatherSense® Fishing Condition Monitor: purchase and plug in the WeatherSense®

accessory to your 700 Series™ Fishing System to obtain barometric pressure readouts and

trend data in real time.

GR4 GPS Receivers: purchase and connect the GR4 GPS Receiver to your 700 Series™ Fishing

System to access advanced FishingGPS™, trackplotter and navigation capabilities built-in to your

Fishing System.

GPS Connection Cable: purchase the GPS Connection Cable in order to connect a handheld or other

NMEA* GPS-compatible device that you may already own to your 700 Series™ Fishing System.

Wireless Sonar Link (WSL): Purchase the Wireless Sonar Link (WSL) accessory to receive remote

sonar signals from a SmartCast® Remote Sonar Sensor (RSS). Radio signals from the RSS are

received by the WSL and transmitted over the Accessory Bus to the 700 Series™ Fishing System.

PC Connect Cable: Purchase the PC Connect Cable to connect the 700 Series™ Fishing System to

a PC in order to upload product software updates and new features obtained from

www.humminbird.com. This accessory requires the MSWindows-compatible HumminbirdPC™

software downloaded from our website to your PC in order to communicate with the 700 Series™

Fishing System.

Be sure to check out our website www.humminbird.com for additional new and exciting

accessories to grow your 700 Series™ Fishing System!

NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth

performance may vary due to transducer installation, water type, thermal layers, bottom

composition and slope.

NOTE: Each accessory requires a separate purchase. You can visit our website at www.humminbird.com

or contact our Customer Resource Center at 1-800-633-1468 for additional details.

Product specifications and features are subject to change without notice.

*NMEA 0183 is a National Marine Electronics Association standard for data communication.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 104

Customizable Digital Readouts: Customizable Digital Readouts is a Humminbird® feature that

permits the user to select the specific digital information that appears in the main Sonar view (i.e.

Speed, Temperature, Barometric Pressure, TripLog, etc.)

Glossary

Sonar Terms:

Dead Zone: The dead zone is the area of the sonar beam that receives the sonar signal after the

main bottom return. Fish and other objects close to the bottom that fall within the dead zone will

probably not be visible in the sonar beam. Precision sonar beams, such as the Humminbird® 20°

beam, have a smaller dead zone than wider sonar beams.

Alarm, Depth: Depth Alarm is a user-controllable, audible alert that sounds when depth is less

than or equal to the setting.

Alarm, Temperature: Temperature Alarm is a user-controllable, audible alert that sounds when

the water surface temperature equals the setting.

Decibel: A Decibel is the measurement for sound pressure level, or "intensity" of the sonar return.

See dB Down Point.

Backlight: Backlight is a user-controllable illumination for the LCD for night and low light use.

dB Down Point: The dB Down Point is the standard decibel level at which the sonar cone angle is

measured, and is written as "@ -10 dB" or "@ -3 dB". Measurements at smaller down points (bigger

negative numbers) indicate that the less intensive sonar signals are being used for the

measurement.

Beam (Sonar Beam): A sonar beam is the wide, cone-shaped projection of sound waves formed as

sound travels underwater. See Cone Angle.

Big Digits View: Big Digits View is a Humminbird® feature that displays the sonar graph and

enlarged digital readouts for easy reading from a distance. This is a great tool when monitoring

the digital depth is important - such as with higher boat speeds, or when viewing the unit from a

distance. When speed input is available, the Big Digits View also shows the TripLog. See TripLog.

Display, FSTN: FSTN is an acronym for Film Super-Twist Nematic. FSTN is a monochrome display

technology characterized by black, high-contrast pixels. All monochrome fixed mount

Humminbird® products use FSTN technology.

Bottom Black: Bottom Black is a Humminbird® feature that "fills in" the area of the display below

the bottom contour. Bottom Black is preferred by some anglers because of its high contrast and

easy readability, even though it can obscure bottom hardness information.

DualBeam PLUS™: DualBeam PLUS™ is a Humminbird® sonar configuration that uses two sonar

beams simultaneously, and combines the information from both beams into one view by

overlapping the data on-screen, or shows each beam individually side by side, or permits each

beam to be viewed individually full screen.

Bottom Contour: Bottom Contour is the profile of the bottom graphed to the display as the

depth changes.

Feature Memory: Feature Memory is a Humminbird® feature that retains the user's menu

settings in permanent memory. Settings are retained even when the unit is powered off

indefinitely.

Bottom Hardness: Bottom Hardness is the density (or composition) of the bottom, which can

often be determined by interpreting the main sonar return. Varying levels of hardness can be

determined by interpreting the "thickness" of the sonar return. Hard returns appear thin and

black, softer returns appear thicker and less black. It is important to note that a sonar return from

a sloping bottom can have the appearance of a softer bottom.

Fish Arch: A Fish Arch is the apparent "arch" that appears on the display when any object moves

through the sonar cone. The arch results from a gradual decrease in distance to an object as it

moves into the sonar cone. The distance to an object changes due to the conical shape of the sonar

beam, which causes the distance to be greater at the edges of the beam than at the center of the

beam. When this distance change is graphed on the display, an arch appears.

Cavitation: Cavitation is the effect of air bubbles created as the propeller rotates and the boat

moves through the water.

Chart Speed: Chart Speed is a user-controllable feature that sets the speed at which sonar

information moves across the display. A faster setting displays sonar information from more pings

and shows more detail, but the information moves quickly across the display: a slower setting

permits viewing of more sonar history, but does not display as much detail. The best setting is

often the user's personal choice.

Fish ID+™: Fish ID+™ is a Humminbird® feature that uses advanced sonar processing algorithms

to determine if a detected object is likely to be a fish. When the sonar signal from an object meets

strict parameters, the unit draws a Fish Symbol (or icon) and the digital depth of the target. On

DualBeam and DualBeam PLUS™ units, fish detected in the narrow center beam are shown as

shaded symbols, and fish detected in the wider beam are shown as hollow symbols.

Cone Angle: The cone angle is the angular measurement of the sonar beam at a specific dB down

point (i.e. -10 dB). See dB Down Point.

Fish Symbol: A Fish Symbol is the graphic that is displayed on the screen when Fish ID+

determines that a sonar return is likely to be a fish. See Fish ID+.

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 106

Freeze Frame: Freeze Frame is a Humminbird® feature that pauses the sonar scrolling so that the

image on screen can be studied with greater detail. See Instant Image Update.

dot pattern. Electrical noise can be isolated by selectively turning on and off other electrical

devices to determine the source. Often re-routing the power cable, or connecting to an alternative

power supply (second battery) can help overcome electrical noise. Hydrodynamic noise (from

propeller and/or hull cavitation) has a more random appearance and is generally related to boat

speed, so that faster operation results in more noise. Hydrodynamic noise can be overcome by

proper transducer installation. Many Humminbird® products have a Noise Filter menu setting

that allows the user to clear the screen of noise that is difficult to eliminate.

Frequency: Frequency is a measure of the number of sound wave cycles per second of a sound

impulse transmitted underwater. A typical frequency for fishfinders is 200 kHz, which offers a

good balance of performance under many conditions. Lower frequencies, such as 50 kHz, are

capable of penetrating to greater depths, but with less resolution. Higher frequencies, such as 455

kHz, offer greater resolution, but are limited in depth performance. Humminbird® uses a variety

of frequencies that are optimized for specific applications.

Pixels: Pixels are the "picture elements", or small square blocks, that make up the image on the

LCD. Measured as a vertical by horizontal number (i.e. 640V x 320H), this key specification typically

indicates the quality of resolution. In fishfinders, the total resolution (vertical multiplied by

horizontal) is often less important than the "Vertical Pixel" resolution. See Pixels, Vertical.

Grayscale: Grayscale is the use of varying shades of gray to represent the strength of the sonar

signal on the display , and is a very intuitive method of presenting information. Traditionally, the

strongest sonar signals are represented in black, and progressively weaker signals are represented

in progressively lighter shades of gray.

Pixels, Vertical: Vertical Pixels are a number of vertical picture elements in a single column on an

LCD display. A greater number of vertical pixels provide finer resolution of targets detected by

sonar. Essentially, a vertical distance (the depth), when divided by a larger number, breaks that

distance into smaller samples, each representing a smaller area and thus providing more detail. In

fishfinders, vertical pixels are more critical than horizontal pixels because the horizontal axis of the

display represents time, or history. Sonar information on the horizontal axis can vary greatly,

depending on boat speed and the Chart Speed setting. A greater number of horizontal pixels show

more sonar history that the boat has passed through. On many models, Humminbird® provides

the most vertical pixels to provide a better display resolution. See Chart Speed and Pixels.

Grayscale, Inverse: Inverse Grayscale is a Humminbird® feature that reverses the correlation of

sonar signal strength and the shade of gray typically used to represent it. The strongest sonar

signals are represented by "white", and progressively weaker signals are represented in

progressively darker shades of gray. While somewhat counter-intuitive, this method makes the

sonar images crisper, and has the benefit of enhancing the apparent sensitivity because the

weaker signals appear bolder. Inverse grayscale works well in very clear water. Debris-laden water

often appears as a lot of clutter on the screen.

Instant Image Update: Instant Image Update is a Humminbird® feature that updates all the sonar

information on the display when Sensitivity and a variety of sonar settings (Bottom View, Range,

etc.) are modified. This differs from the traditional functionality that only updates the new sonar

information collected after the setting change. Instant Image Update permits more accurate fine-

tuning of the display because the user can see the results on the complete sonar graph. When

combined with the Freeze Frame feature, the user can adjust and understand the effects of many

different sonar settings quickly and easily.

Power Output: Power output is the amount of sound energy emitted into the water by the sonar

transmitter. Power output is measured using either RMS (Root Mean Square) or P-T-P (Peak-to-

Peak) measurement systems. Either method is acceptable, but it is important, when comparing

power outputs, to make sure that the same measurement system is being used for both outputs,

because P-T-P numbers are 8 times higher than RMS numbers. Greater power output allows the

sonar signal to penetrate through weeds and thermoclines, reach deeper depths and operate

more effectively in noisy environments, such as when the boat is running at high speed.

Maximum Depth Menu: The Maximum Depth Menu is a Humminbird® feature that optimizes

performance based on the maximum operational depth set by the user. Many Humminbird®

units can operate across a very broad depth range (up to 2500 feet) which causes the unit to "look"

up to that full depth under some circumstances. Due to the speed of sound in water, this can result

in less responsiveness because the unit has to wait for a longer period of time to receive the sonar

signal. When the Maximum Depth menu is set to a lower value, the unit only looks up to the

setting, which increases the responsiveness of the unit. This is an important feature for anyone

operating in shallower depths!

Pulse Width (Pulse Length): Pulse Width is the length of time that a sonar sound burst is

transmitted into the water. Shorter pulse widths provide better target separation, but cannot

travel to great depths. Longer pulse widths provide better depth penetration, but result in poorer

target separation. Humminbird® varies pulse width based on depth to optimize both target

separation and depth performance. See Target Separation.

QuadraBeam™: QuadraBeam™ is a Humminbird® sonar configuration that uses four sonar beams

for a more detailed bottom image. QuadraBeam™ uses the DualBeam PLUS™ configuration for

downlooking, and also adds two additional beams to look to the left and right. The sonar beams

pointing to the left and right provide the ability to spot fish and structure over a wide 90° area,

and to identify on which side of the boat they are located. See DualBeam PLUS™.

Noise: Noise is unintentional, external sound waves that interfere with the optimal operation of

sonar. Noise appears as random "dots" on the display, and is caused by a variety of sources.

Electrical noise (from trolling motors, bilge pumps, VHF radios) typically manifests as a consistent

100

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 108

Quick Disconnect Mount: The Quick Disconnect Mounting system is an exclusive

Humminbird® feature that permits the unit to be easily removed from the mounting base by

pressing a release button, and re-installed by simply snapping it back into place. All cable

connections are made when installing, so that no separate wiring connections are required.

Additionally, the mount offers 90° tilt and 360° swivel capability to adjust the viewing angle

of the unit as you move about the boat.

Sonar Update Rate: Sonar Update Rate is the number of times per second that the

transmitter/receiver sends and receives sonar signals. A very fast sonar update rate collects more

information and provides a more detailed image of the bottom, fish and structure. Many

Humminbird® units operate at up to 40 times per second when in single frequency operation.

Due to the limitation of the speed of sound in water, the update rate begins to slow as depth

increases to deeper than 50 feet. In very shallow water (less than 10 feet), however, update rates

as much as 60 times per second can be achieved.

Real Time Sonar: Real Time Sonar is a Humminbird® technology that delivers ultra-fast sonar

transmitter/receiver operation and results in a more detailed instantaneous view of what is under

the boat. The Real Time Sonar window is a vertical band at the right side of the display that shows

the instantaneous sonar return from the transducer at a particular instant. The RTS® Window

menu option permits the user to adjust the window to show the full sonar signal return, or just a

narrower band that indicates intensity using grayscale. Real Time Sonar relies on very fast Sonar

Update Rate (Ping Speed). See Sonar Update Rate.

Speed: Speed is the rate at which the boat moves through the water. Boat speed can be measured

as Speed Over Ground or Speed Through Water. Speed Over Ground is provided by GPS, and is the

measurement of the boats progress across a given distance. Speed Through Water is provided by

a speed paddlewheel, and is the measurement of the flow past the boat, which may vary

depending on current speed and direction. Speed Through Water is most critical for anglers using

downriggers, as it impacts the running depth of the down riggers. Speed Over Ground is optimal

for navigation, as accurate destination times can be derived from this measurement.

Humminbird® products allow for input and display of both sources.

Receiver: See Transmitter.

Second Return: The Second Return is a term that describes the appearance of a second sonar

return below the primary sonar return (bottom contour) at exactly twice the true depth. The

second return is caused by the same sonar energy bouncing off the bottom once, rebounding to

the water surface and then traveling back down to the bottom to be reflected again. Second

returns are more common in shallow water and over hard bottoms; it is actually possible to see a

third sonar return under some circumstances. The second return provides useful information to

help determine bottom hardness, as areas with harder bottoms will generally create a second

return. The second return can be used as a guide to set Sensitivity when in shallower water.

Structure: Structure is a general term for objects on the bottom that present a discontinuity and

are a likely attractor for fish. This includes bottom contour features (drop-offs, humps, and holes),

standing structure (stumps, timbers, brush piles) and a wide range of other potential objects

(sunken boats, reefs). Humminbird® units excel at showing structure with great detail over a

wider area due to unique sonar configurations developed for the angler.

Structure ID®: Structure ID® is a Humminbird® feature that describes the traditional grayscale

method of presenting sonar information. See Grayscale.

Surface Clutter: Surface Clutter is a phenomenon where sonar returns are reflected off of tiny

objects near the surface of the water, including algae and even air bubbles. Typically, saltwater

environments have significantly greater surface clutter than freshwater due to continuous wind

and wave action that causes aeration at the surface. The Surface Clutter menu provides manual

control to bias the default settings under extreme conditions.

Sensitivity: Sensitivity is a user feature that adjusts the sensitivity of the sonar system to show

more or less detail in the water. Higher sensitivities are often preferred, however, when the water

contains debris (silt, storm debris, etc.) and it can be difficult to pick out targets. Conversely, if

sensitivity is set too low, relevant targets may be missed.

SONAR: SONAR is the acronym for SOund and NAvigation Ranging. Sonar technology uses

precision sound bursts transmitted underwater to determine the distance and other attributes of

objects in the water. Distance can be determined because the speed of sound in water is constant,

and the time for the signal to return is measured. Sound also travels very quickly underwater,

making sonar a responsive, cost-effective tool. Sonar is the basic technology behind all

recreational and commercial fishfinding and depthfinding devices.

Target Separation: Target Separation is the measurement of minimum distance that a

fishfinder needs to be able to recognize two very close objects as two distinct targets (i.e. two

fish hanging very close, or a fish hanging very close to structure). Humminbird® findfinders

provide a very good 2 1/2 inches of target separation in shallower than 100 feet of depth.

Target separation decreases as depth increases due to the need for longer Pulse Width to

achieve greater depth. See Pulse Width.

Sonar Echo Enhancement: Sonar Echo Enhancement is a Humminbird® feature that describes the

high degree of sonar sensitivity achieved through a combination of transmitter/receiver and

software algorithms. The result of Sonar Echo Enhancement is to display virtually everything in

the water that is of interest to the angler, including bait fish, game fish, thermoclines, weed beds,

subtle structure, and more.

Thermoclines: Thermoclines are water layer(s) of distinctly different temperatures that create a

sonar reflection due to the density of the differing water temperatures. Typically a thermocline

will appear as a continuous band across the display at some distance above the bottom contour.

Thermoclines are of interest to anglers because fish will suspend above or below the thermocline

as they seek the optimum temperature and oxygen levels.

101

102

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 110

Time Variable Gain: Time Variable Gain is a processing step applied to the sonar return to

"normalize" the data so that objects of equal size (i.e. fish) appear to be the same size, even if they

are separated by a good distance. Time Variable Gain is a fundamental attribute of good sonar, but

is often promoted as a feature.

WhiteLine®: WhiteLine® is a Humminbird® feature that highlights the strongest sonar return on

the display using a very light gray band. This is preferred by some anglers who have grown

accustomed to the feature on paper graph chart recorders.

WideSide®: WideSide® is a Humminbird® sonar configuration used in an optional transducer.

WideSide® uses three sonar beams pointing to the left, right and down. Beams pointing to the left

and right are effective for spotting fish and structure near the surface or on the bank. The

downlooking beam provides depth information directly below the boat.

Total Screen Update®: A Humminbird® feature that refreshes and updates all the sonar

information on the display when a range change occurs. Without Total Screen Update®, only the

most recent sonar information would be drawn to the new range, and the old sonar information

would continue to scroll off the screen at the old range.

X-Press™ Menu: X-Press™ Menus are a Humminbird® feature that make the most commonly-used

menu selections available with one press of the MENU key. Items that appear on the

X-Press™ Menu are related to the current view, and present the most logical choices for that view.

Sonar View X-Press™ menus will differ from Chart View X-Press™ menus, etc. X-Press™ menus are

one of the principal reasons that Humminbird® products are easier to use.

Transducer: The transducer is part of the sonar system, which mounts on the boat and is in

contact with the water, that converts the electrical energy from the transmitter into sound energy,

and that forms the sonar beam in turn. Internally, the transducer consists of one or more piezo

electric disks that expand by very minute amounts to create the sound wave. This element also

works in reverse, converting the returned sound energy back into an electrical signal that the

receiver interprets. Transducers are available for many specific mounting applications for the boat,

such as a transom mount, trolling motor mount, etc. Humminbird® offers many sophisticated

transducers, often with multiple piezo electric elements designed to form specifically-shaped

sonar beams, providing the angler with superior tools for finding and catching fish. See

Transmitter and SONAR.

Zoom: Zoom is a feature that focuses in on a smaller area of the bottom to provide enhanced

resolution. With enhanced resolution, the angler can more easily see fish hanging in structure or

multiple fish hanging close together. Split screen zoom divides the display into the full range view

on the right, and the zoomed view on the left. Humminbird® offers One-Touch® Zoom which

allows the zoom feature to be easily accessed from the regular sonar view with just one key press,

eliminating the need to use menus to access the feature.

Transmitter: The transmitter and receiver are matched parts of the sonar system that send

(transmit) and listen to (receive) the sonar signals, and work in conjunction with the transducer.

Humminbird® transmitters have an extremely fast cycling design that can send signals up to 60

times per second, as well as produce the varying levels of power output needed for different

depths and conditions. Additionally, the transmitter has the capability to create very precise sonar

pulses needed for a high degree of target separation. Humminbird® receivers are extremely

sensitive, but within a narrow "bandwidth" to discriminate against noise from external sources.

Additionally, the receiver offers a wide "dynamic range" which provides the ability to receive very

strong signals alternating with very weak signals, without the strong signal overwhelming the

weak signal. See Transducer and Noise.

Zoom, Bottom Lock: Bottom Lock Zoom is a feature that focuses on a smaller area just above

the bottom to provide enhanced resolution. Unlike regular zoom, it continuously graphs the

bottom at a constant point on the display regardless of changes in depth. This "flattens" out

the bottom contour, but is effective at showing fish on or near the bottom, and is preferred by

many saltwater anglers

TripLog: TripLog is a Humminbird® feature that provides an on-screen counter for Elapsed Time,

Average Speed and Total Distance traveled, and requires a speed input to activate the feature.

TripLog appears on the Big Digits View, and can be reset to zero through the TripLog menu.

TrueArch®: TrueArch® is a Humminbird® feature that provides true fish arches, not artificial arches

or symbols. Humminbird® units are capable of producing fish arches due to the wide 60° sonar

beam of DualBeam PLUS™, an extremely sensitive sonar receiver. See Fish Arch.

Viewing Angle: Viewing Angle is an attribute of an LCD that characterizes visibility of the

display when viewing from off the central access, such as when standing to the side of the

fishfinder. Wider viewing angles are better because the information remains visible even

when viewing from the side.

103

104

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 112

correction signals are provided by the USCG and received by an auxiliary Differential Beacon

Receiver (DBR) that connects to the GPS receiver. The advent of WAAS has largely negated the

need for the added expense of a DBR in the United States.

GPS & Navigation Terms:

Acquisition Time: The length of time that a GPS receiver typically takes to determine a position

from at least three satellites. Humminbird® GPS receivers provide very fast acquisition times

(under one minute), permitting users to get out on the water faster.

Distance To Go: Distance To Go is the straight-line distance between Present Position and the

Destination Waypoint. DTG and SOG (Speed Over Ground) are used to calculate Time To Go. See

Time to Go and Speed Over Ground.

Alarm, Arrival: The audible alert that sounds when the boat is equal to or less than the alarm

setting (25 feet–3000 feet) from the location of the destination waypoint.

Estimated Position Error (EPE): Estimated Position Error is a calculation that indicates the

potential position inaccuracy the user may experience due to a variety of GPS factors which

include satellite position in the sky, signal strength and others factors.

Alarm, Drift: Drift Alarm is an audible alert that sounds when the boat is equal to or over the

alarm setting (25 feet–3000 feet) from the location where the alarm was turned on.

Alarm, Off-Course: Off-Course Alarm is an audible alert that sounds when the boat’s distance

from the intended Track, (Cross Track Error), is equal to or over the alarm setting (25 feet – 3000

feet). See Track and Cross Track Error.

Fix Type: Fix Type indicates whether the GPS receiver is providing 2D fix or 3D fix. A 2D fix requires

only three satellites and provides only latitude and longitude. A 3D fix requires four or more

satellites, and provides latitude, longitude and altitude.

Altitude: Altitude measures height above sea level. Altitude is a measurement that can be

provided by GPS.

GPS: GPS is an acronym for Global Positioning System. GPS provides accurate position (latitude,

longitude, altitude) information virtually anywhere on the earth through satellite technology and

personal receivers on the ground. A series of geosynchronous satellites broadcast a unique signal

toward the earth once per second. A GPS receiver, such as that included with many Humminbird®

products, receives the signals from these satellites and is able to determine position based on

very slight differences in the time each signal is received and the receiver’s knowledge of the

location of each of the satellites.

Bearing (BRG): Bearing is the direction to a destination waypoint measured in degrees from

North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West).

Chartplotter: Chartplotter describes a navigation device that shows Present Position on a Map,

along with Tracks, Waypoints, and Routes. All Chartplotters are also considered Trackplotters. All

Humminbird® GPS Combo units are Chartplotters. See Trackplotter.

Heading: Heading describes the direction the boat is pointing and is measured in degrees (i.e.

321°, where 000° is North, 090° East, 180° is South, 270° is West). Due to wind and waves, the

boat is often traveling in a slightly different direction than it is heading, and therefore Heading is

often confused with Course Over Ground. See Course Over Ground.

Cold Start: Cold Start refers to the procedure that a GPS receiver must perform when it does not

have historical information regarding its current location. This procedure typically lasts for several

minutes, and may be experienced upon first power up of the receiver, or if the receiver has been

moved a great distance.

Map Datum: A Map Datum refers to a particular survey of the earth’s surface that was referenced

when creating a chart (i.e. WGS84). Since the earth is not flat, and not even consistently round, a

mathematical model must be used to translate coordinates from the sphere of the earth to the

flat surface of a chart. This mathematical model is the Map Datum. Historically, many different

Map Datums have been used around the world to create maps; often a reference to the Map

Datum can be found in the legend of a paper map. It is important to select the correct Map

Datum setting in your fishfinder when comparing GPS position to a paper chart to avoid slight

position inaccuracies. Almost all electronic charts use the WGS84 Map Datum and therefore, they

do not require setting changes.

Course Over Ground (COG): Course Over Ground is the current direction the boat is traveling

measured in degrees from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is

West). When the Course Over Ground is equal to Bearing, the boat is said to be “On Course” and

will arrive at the destination in the most efficient manner. COG is often confused with Heading.

See Heading.

Cross Track Error (XTE): Cross Track Error is the straight-line distance of the boat from the

intended Track. XTE measures how far the boat is off course, and also triggers the Off Course

Alarm. See Track.

MMC: MMC is an acronym for Multi Media Card. An MMC is a postage stamp-sized memory

device used to store electronic data such a maps, waypoints, routes and other information. MMC

is a very rugged format suitable for the marine environment, but it is not waterproof. The MMC

is removable from Humminbird® products, and can be used in a PC that is equipped with an

Differential GPS (DGPS): Differential GPS is a system to improve the position accuracy of the

Department of Defense GPS through the use of secondary “correction signals” broadcast from

ground stations around the coastal United States and on some inland waterways. These

105

106

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 114

appropriate card reader. MMC is the same format that many digital cameras use. See SD.

navigation because accurate destination times can be derived from this measurement.

Humminbird® products allow for input and display of both speed measurements.

North, Magnetic: North is the principle reference point of the compass (i.e. North is 000°).

Magnetic North relies on the earth’s magnetic field to align a metal pointer generally towards

True North. However, due to local variations in the earth’s magnetic field around the globe, the

difference between True North and Magnetic North can be greater than 10°. See True North.

Time To Go (TTG): Time To Go is the estimated time required to reach the destination waypoint.

TTG is calculated using the SOG and DTG. See SOG and DTG.

Track: A Track is a series of saved points that define the past path of the boat. These Track Points

are saved at regular time intervals. Tracks are a useful and quick method to see where you’ve

been, and an easy guide to follow to get you back to the starting point. Generally, all GPS units

have a limited number of Track Points that can be saved before the unit runs out of memory and

begins erasing the first track points saved. Because of this, the user can adjust the Track Point

Interval menu to increase the amount of time between when points are saved, and thus extend

the distance covered by a track. Tracks can also be permanently saved to memory, and re-

displayed at the user’s option.

North, True: North is the principle reference point of the compass (i.e. North is 000°). True North

uses the axis of the rotation of the earth as the reference for North and is constant for all points

on the earth. Most GPS units default to True North as the setting. The GPS heading may vary from

the boat compass heading because the compass uses Magnetic North. Humminbird® GPS units

provide the option of selecting True or Magnetic readouts by using the North Reference menu.

See Magnetic North.

Present Position: Present Position is the current location (latitude, longitude) determined by GPS.

The Present Position is indicated on-screen by a directional boat icon if the boat is moving, or a

round symbol if the boat is stationary.

Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and

represents the most efficient path between the two points because it is a straight line. The TRK is

measured in degrees (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See

Cross Track Error, Course Over Ground.

Route: A Route is series of waypoints linked together in a specific sequence to define a navigation

path between two points, and saved in the fishfinder’s memory. Routes are often used when

frequently traveling between two or more locations because it is a faster and more accurate

method than repeatedly selecting individual waypoints each time one travels through the same

area. Routes consist of a Start Waypoint, an End Waypoint, and a series of waypoints in between.

Users can begin navigation at the beginning, the end (to run the route in reverse) or at any

waypoint in between. See Waypoint.

Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with

Track, Waypoint, and Routes, but NO MAP in the background. See Chartplotter.

Trolling Grid: Trolling Grid is a Humminbird® feature that displays a precise reference grid around

a waypoint. This grid is used as a guide pattern for trolling around a specific area to assure a more

efficient and complete coverage of that area. Trolling Grid resolution be changed by zooming in

or out on the chart. The Trolling Grid can also be rotated on the display to orient it for optimal boat

course for wave and wind conditions.

SD: SD is an acronym for Secure Digital. An SD card is virtually identical in function to an MMC;

however, the speed at which information can be accessed is generally faster, the storage capacity

is generally larger, and the card has security features which can be used to prevent extracting the

data from the card. SD is the same format that many digital cameras use. See MMC.

UTC: UTC is an acronym for Universal Time Constant. UTC is the “standard time” used in

navigation, and is the local time in Greenwich England. (UTC is equivalent to Greenwich Mean

Time (GMT)). To display the correct Local Time in a Humminbird® GPS unit, the user must use the

Local Time Zone menu and select the time zone (i.e. EST, CST).

Selective Availability: Selective Availability (SA) is a GPS system “feature” that can be

implemented by the U.S. Department of Defense (DoD) to degrade the accuracy of GPS

positioning information. With SA active, the GPS is accurate to within 100 meters 95% of the

time. With SA inactive, the GPS is accurate to within 45 meters 95% of the time. Currently, SA is

inactive and the consumer can enjoy the greater precision GPS provides; however, the DoD

reserves the right to activate SA at any time.

WAAS: WAAS is an acronym for Wide Area Augmentation System. WAAS is complementary

technology to GPS that provides enhanced accuracy through correction signals broadcast from

Federal Aviation Administration WAAS satellites stationed over the USA. These secondary signals

are automatically received by the standard Humminbird® GPS Receiver. With WAAS signal, GPS

accuracy is improved to within 3 meters 95% of the time. Outside the United States, regional

governmental coalitions have created similar systems such as EGNOS (Europe) and MSAS (Japan).

Speed Over Ground (SOG): Speed Over Ground is the measurement of the boat’s progress across

a given distance, and is the speed measurement provided by GPS. An alternate, Speed Through

Water, is provided by a speed paddlewheel, and is the measurement of the flow past the boat,

which may vary depending on current speed and direction. Speed Over Ground is optimal for

Waypoint: A Waypoint is the saved location (latitude, longitude) of a point of interest that is

stored in a GPS receiver’s memory. This can include a marker buoy, dock, fishing hole or anywhere

107

108

Download from Www.Somanuals.com. All Manuals Search And Download.

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 116

else the user may want to return to. Humminbird® products offer the ability to name and assign

a symbol to the saved location. Depth, Date and Time of Day when the waypoint was created is

also saved.

Contact Humminbird®

Waypoint Target: Waypoint Target is a Humminbird® feature that displays a precise “bull’s eye”

around a selected waypoint. This bull’s eye is used to easily monitor boat position relative to a

waypoint, and is useful for fishing over submerged structure. With Waypoint Targets, a quick look

at the screen lets you know how far off the waypoint the boat has drifted.

Contact the Humminbird® Customer Resource Center

in any of the following ways:

By Telephone:

(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):

1-800-633-1468

By e-mail:

(typically we respond to your e-mail within three business days):

[email protected]

For direct shipping, our address is:

Humminbird

Service Department

678 Humminbird Lane

Eufaula, AL 36027 USA

109

110

Download from Www.Somanuals.com. All Manuals Search And Download.

Grizzly Dust Collector G0562 User Manual
H2O Audio Carrying Case WSB 5A1 User Manual
Hamilton Beach Slow Cooker 33365 User Manual
Harbor Freight Tools Drill 42827 User Manual
Hotpoint Dishwasher HDA829 User Manual
HP Hewlett Packard Network Router WHR HP AG108 User Manual
Husqvarna Brush Cutter 323RJ 325RJX Series User Manual
Hypertec Carrying Case Z0101 User Manual
IBM Printer 1585 MT 4539 User Manual
Ice O Matic Ice Maker EMF 800 User Manual