Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
Notice
**
Read this manual carefully and make sure you understand the provided instructions. For your safety,
know what the reaction upon each action will be.
**
Warnings, Cautions and Notes
Throughout the whole manual, pay special attention to the following marks that indicate hazardous
situations.
**
•
•
•
Warning
**
Indicates a hazardous situation which, if not avoided, could result in (serious) injury.
**
Caution
**
Indicates a situation which, if not avoided, could damage the equipment or other apparatus.
**
Note
**
Indicates additional information to the user to make the user aware of possible problems and
information of any importance to help the user to understand, to use and to maintain the
installation.
**
To reduce the risk of electric shock, do not remove cover (or back). No
user serviceable parts inside. Refer servicing to qualified service
personnel.
This symbol indicates dangerous voltage inside the product that
presents a risk of electric shock or personal injury.
**
**
This symbol indicates important instructions accompanying the product.
**
**
**
**
GB 2
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
Safety and Warning
**
This digital terrestrial receiver and personal video recorder has been manufactured to satisfy
international safety standards. Please read the following safety precautions carefully.
**
Safety Instructions and Precautions
**
1. MAINS SUPPLY
**
90 - 250V AC 50/60Hz
Operate your product only from the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult local power company.
Disconnect the receiver from the mains before you start any maintenance or installation
procedures.
**
2. OVERLOADING
**
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or
shock.
**
3. LIQUIDS
**
The receiver should not be exposed to any liquids such as dripping or splashing. In addition,
no objects filled with liquids, such as vase, shall be placed on the apparatus.
**
4. CLEANING
**
Disconnect the receiver from the wall outlet before cleaning.
Use a light damp cloth (no solvents) to dust the receiver.
**
**
**
5. VENTILATION
**
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do
not stand the receiver on soft furnishings or carpets. Do not stack electronic equipments on
top of the receiver.
**
6. ATTACHMENTS
**
Do not use any unsupported attachments as these may be hazardous or cause damage the
receiver.
**
7. CONNECTION TO THE AERIAL
**
Disconnect the receiver from the mains before connecting or disconnecting the cable from the
aerial. Failure to do so can damage the aerial.
**
8. CONNECTION TO THE TV
**
Disconnect the receiver from the mains before connecting or disconnecting the cable from the
aerial. Failure to do so can damage the TV.
**
9. EARTHING
**
The aerial cable must be buried in the ground.
The buried cable of the system must comply with SABS 061.
**
**
**
**
**
GB 3
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
Safety and Warning
**
10. LOCATION
**
Place the receiver indoors to avoid exposing it to lightening, rain or sun.
Do not place it near a radiator or heat register.
Make sure it has more than 10 cm clearance from any appliances susceptible to
electromagnetic influences, such as TV and VCR.
Do not block these openings with any object, and do not place the product on a bed, sofa, rug,
or other similar surface.
If you place the product on a rack or bookcase, ensure that there is adequate ventilation and
that you have followed the manufacturer's instructions for mounting.
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall.
A falling product can cause serious injury to a child or adult, and serious damage to the
appliance.
**
11. LIGHTNING, STORM, or NOT IN USE
**
Unplug the product from the wall outlet and disconnect the aerial during a lightning storm or
when left unattended and unused for long periods of time. This will prevent damage to the unit
due to lightning and power-line surges.
**
12. EXTRANEOUS OBJECTS
**
Do not insert anything through the openings in the unit, where they can touch dangerous
voltage point or damage parts.
**
13. REPLACEMENT of PARTS
**
When the replacement parts are required, be sure the service technician uses replacement
parts specified by the manufacturer or those that have the same characteristics as the original
**
**
part. Unauthorised substitutions may result in additional damage to the unit.
**
**
Warning
**
1. Follow these directions in order not to damage the power cord or plug.
Do not modify or process the power cord or plug arbitrarily.
Do not bend or twist the power cord too much.
Make sure to disconnect the power cord with the plug held.
Keep heating appliances as far as possible from the power cord in order to prevent the cover
vinyl from melting.
2. Follow these directions. Failure to follow one of them may cause electrical shock.
Do not open the main body.
Do not insert metals or inflammable objects inside the product.
Do not touch the power plug with a wet hand.
Disconnect the power cord in case of lightening.
3. Do not use the product when it is out of order. If you continue to use the product when
defective, serious damage can be caused toit. Make sure to contact your local product
distributor if the product is out of order.
**
**
**
**
GB 4
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
Contents
**
1. Before Using the Receiver
GB7
**
1.1 Package Contents
1.2 Front Panel
GB7
GB8
1.3 Rear Panel
GB9
1.4 Remote Control
2. Setup
GB10
GB12
**
2.1 Connecting Aerial
2.2 Powering On
GB12
GB14
GB15
GB16
3. Installation Wizard
4. Basic Operation
**
4.1 Switching Channel
4.2 Volume Control
4.3 Motion Still
GB16
GB16
GB16
GB16
GB17
GB17
GB18
GB20
GB22
4.4 Teletext
4.5 Change the Subtitle Language
4.6 Change a Audio Language
4.7 Programme Information (I- plate)
4.8 Option List
**
**
5. Channel List
**
5.1 Displaying and Switching Channel List
5.2 Changing Channel List Group
5.3 Edit Channels
GB22
**
GB23
GB24
GB26
GB29
GB30
5.4 Edit Favourite Channels
5.5 Channel Change Mode
6. Programme Guide
**
6.1 Viewing Programme Guide Information
6.2 Finding a Programme
GB30
**
GB32
GB33
6.3 Viewing Reserved Programme
**
**
**
**
GB 5
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
Contents
**
7. Setting Preferences
7.1 Parental Control
GB35
**
GB35
GB37
GB38
GB40
GB40
GB42
GB43
GB44
7.2 Language Setting
7.3 Time Setting
7.4 Schedule
7.5 A/V Control
7.6 UHF Tuning
7.7 Miscellaneous Settings
8. Installation
**
8.1 Automatic Search
8.2 Manual Search
8.3 Default Setting
8.4 Antenna Power
GB44
GB45
GB46
GB47
GB48
9. Software Update
**
9.1 OTA (Over the Air)
GB48
GB51
GB52
9.2 S/W Update from PC
**
**
10. System Information
**
10.1 Status
GB52
GB52
GB52
GB53
GB54
GB63
GB64
10.2 Signal Detection
10.3 Conditional Access
11. GAMES
12. Manipulating your TV using Remote Control
13. Menu Map
14. Trouble Shooting
**
14.1 Trouble Shooting
14.2 Error Message
15. Specification
GB64
GB65
GB66
GB68
GB69
16. Glossary
17. Service and Support
**
**
**
**
GB 6
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
1.Before Using the Receiver
**
This chapter describes detail instructions on the product and its accessories.
1.1 Package Contents
Please check all package contents before using your receiver.
**
**
Remote Control
User's Manual
**
**
**
**
Batteries
Scart Cable
RF Cable
**
Note: Since faults may occur if the remote control is being left without a battery for a long time,
always keep the battery inserted in the remote control.
**
**
**
**
GB 7
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
1. Before Using the Receiver
**
1.2 Front Panel
**
1. STANDBY Button
**
Switches between Operation and Standby modes.
2. TV/RADIO Button
**
Switches between TV and Radio.
**
**
3. CH - / CH +
**
Moves the TV/Radio channel up/down.
4. STANDBY LED
**
Red light is displayed when the product is in the Standby mode.
Green light is displayed when the product is in operation.
5. TV LED
**
Green light is displayed when the receiver is in TV mode.
6. RADIO LED
**
Amber light is displayed when the receiver is in Radio mode.
7. SMART CARD SLOT
**
Slot for a smart card.
**
**
**
**
GB 8
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
1.3 Rear Panel
**
1. ANTENNA IN
**
Connects a aerial to a ANTENNA input jack on the your receiver.
**
2. TV / VCR
**
Connects a RF signal from your receiver to RF (ANT) input jack on your TV or VCR.
**
3. TV SCART
**
Connects a TV SCART cable.
4. VCR SCART
**
**
**
Connects a VCR SCART cable.
5. AUDIO L/R
**
Connects to your TV or VCR and output Audio signals.
6. VIDEO
**
Connects to your TV or VCR and output Video signals.
7. RS-232C
**
Connects to your PC to upgrade product’s software programme.
8. S/PDIF
**
Outputs the digital audio signals(S/PDIF).
**
**
**
**
GB 9
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
1. Before Using the Receiver
**
1.4 Remote Control
**
**
**
**
Note: This remote control can also control your TV. To set the remote control for your TV, please
refer to Chapter 12.
**
**
**
**
GB 10
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
1. DTV
12. STANDBY
**
**
Controls the Receiver.
Switches between Operation and
Standby modes.
**
**
2. TV
**
13. GUIDE
Controls the TV.
**
**
Displays the Programme Guide.
**
3. NUMERICAL BUTTONS
**
14. EXIT
Enters a TV/Radio channel number or
**
menu option number.
Exits the main menu or Guide screen.
**
**
4. LIST
15. OK
**
**
Displays the channel list.
Selects a menu, or confirm the selected
operation. And display the channel list
during watching a programme.
**
5. BACK
**
Returns to the previous menu and
16. FREEZE
**
screen.
Freezes the TV screen you are watching.
**
Play the audio continuously.
6. ARROW BUTTONS
**
**
Changes the channel or move the cursor
17. SUBTITLE
**
to the up, down, left or right menu option.
Changes the subtitle language.
**
**
7. OPT+ (OPTION)
18. V-/V+
**
**
**
**
Displays the channel attributes during
Adjusts the audio volume.
watching a programme.
**
**
19. i (INFORMATION)
**
8. SOUNDTRACK
**
Displays the information about the
Displays the Soundtrack.
channel and programme.
**
**
9. CH-/CH+ (PAGE-/PAGE+)
20. MUTE
**
**
Changes the Channel or Page.
Pauses the audio temporarily. That is,
**
volume on/off temporarily.
10. MENU
**
**
Displays the main menu.
21. AUX
**
**
Controls input mode of TV.
11. TEXT
**
**
Displays digital text.
22. TV/RADIO
**
**
Switches between TV and Radio modes.
**
**
**
**
**
GB 11
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
2. Setup
**
This chapter describes how to set up the receiver. Select the most appropriate procedure depending
on your case.
Note: If you encounter any problem when setting up the receiver, please contact your local product
distributor.
Where possible, use an outdoor roof aerial intended for receiving UHF channels between 21
and 69.
It is not advisable to use indoor or window mounted aerials, as digital channels will be
difficult or even impossible to receive.
2.1 Connecting Aerial
1. Connecting TV and VCR
**
**
**
•
•
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.
Scart and co-axial cable are connected as in the figure above.
**
**
**
**
GB 12
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
2. Connecting Hi-Fi system 1
Connect the outputs on this receiver to corresponding inputs on your Hi-Fi system.( left audio out to
left audio in, right audio out to right audio in)
3. Connecting Hi-Fi system 2
**
**
If you wish to connect the optical S/PDIF terminal and Dolby digital decoder to listen digital audio,
connect as following.
**
**
**
**
GB 13
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
2. Setup
**
2.2 Powering On
1. Connect the power cord of the receiver to a wall outlet.
**
**
2. Power on by pressing the STANDBY
button at Remote Controller.
The Standby LED indicator is turned on Green.
**
**
**
**
**
**
**
GB 14
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
3. Installation Wizard
**
When powering on your receiver for the first time after purchasing, the Installation Wizard is
automatically started. It immediately performs Channel Search.(You can run the Installation Wizard
in Default Setting.)
Please wait for finishing the Channel Search. If you want to stop
the Channel Search, select the OK
button.
If the Channel Search is stopped or finished, the result of
Channel Search is automatically saved.
When completing Channel Search, you can enjoy programmes.
Warning: Press the EXIT
button to save the previous input information and exit the installation
wizard when running the installation wizard. If you exit the install wizard without fully
completing the setting procedures, you may not watch any broadcasting normally. In this
case, you can use the Installation Menu to configure your receiver as you like.
**
**
**
**
**
**
GB 15
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
4. Basic Operation
**
This chapter describes functions such as switching channel, volume control, and basic features for
watching programmes.
4.1 Switching Channel
You can switch the current channel using one of the following methods.
1. Press the CH-/CH+
button.
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the
channel directly.
3. Press the TV/RADIO
button to switch between TV channel and Radio channel.
Note: You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5
and 6 for more information.
4.2 Volume Control
1. Press the V-/V+
2. Press the MUTE
buttons to adjust the audio volume of your TV/DTV.
button to stop the sound of your TV/DTV temporarily.
Note: You can adjust the Volume Control in the TV when you are setting TV code. Refer to
chapter 12 to set the TV.
**
**
4.3 Motion Still
Press the FREEZE
button at remote control to pause the current programme. Press the
FREEZE button again to continue the programme.
4.4 Teletext
When the channel supports teletext, the Teletext icon ( ) is displayed on the I-plate.
It’s possible to adjust in the channel supported teletext mode. Press the TEXT
button to change
to the teletext mode.
1. Press the MENU
2. Select your desired teletext fuction using the button.
3. Press the OK button.
button to display teletext menu.
**
**
**
**
GB 16
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
Teletext Functions
Index
Return to index page.
Sub-page
Search the sub-page using the sub-code. If it’s not in the teletext mode, display the
current time.
MIX
Displays teletext with TV picture.
Cancel
Reveal
Displayed only when the service is a scrambled service.
Displays the concealed information.
Double Size Displays the text size as double size.
Page Hold Hold function during teletext display.
4.5 Change the Subtitle Language
If the current programme provides Subtitle information, you can select the language for the Subtitle.
1. Press the SUBTITLE
button to display the subtitle
language list.
2. Select your desired subtitle language using the
button, and press the OK
button. Then the subtitle will
be displayed in the selected language at the bottom of the
screen.
**
**
3. Select OFF from the subtitle language list not to display
subtitle from the screen.
Note: You can select a default subtitle language by selecting MENU - Preferences - Language
Setting - Subtitle Language.
The subtitle set up as the value of MENU when you change channel and turn on or off
power.
4.6 Change a Audio Language
If the current programme is available in multiple audio languages, you can select the language that
you wish to listen in.
1. Press the SOUNDTRACK
button to display
soundtrack list.
2. Select your desired audio language using the
to change Audio immediately.
button
3. Select Audio Direction(left, right, stereo) using the
button.
Note: you can select your desired default audio language by
selecting MENU - Preferences - Language Setting
-Audio Language.
**
**
**
**
GB 17
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
4. Basic Operation
**
4.7 Programme Information (I- plate)
Programme information is always displayed for a specific period of time whenever you switch
channels. You can view the programme information by pressing the i button while watching a
programme. Press the EXIT
button to hide the I-plate.
1. General Information
General Information is displayed as follows on the screen.
**
**
**
1. Channel number and channel name
2. Programme name
3. Icons
Displayed only if this programme is reserved.
Represents parental level. It indicates the minimum level of ages that the programme
is targeted at.
Displayed only when the channel is a locked channel.
Displayed only when the channel is a scrambled channel.
Displayed only when subtitle information is available.
Displayed only when there is any teletext information.
Displayed only when the programme is a dolby digital one.
**
**
**
**
GB 18
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
4. Current time
5. Detail programme information: displayed if detailed programme information is provided.
6. Channel looping mode and Channel List Name : if you select Within the current channel list
by selecting MENU - Edit channels - Channel Change Mode , the Icon of Channel looping
mode is displayed. And channel list, which you selected, is displayed.
7. Programme broadcasting time and progress bar: displays programme playing time and
progress bar.
8. Next programme Information : displayed if next programme information is provided. Press the
button to display the next programme information.
Note: If there is no available programme information, programme information is not displayed.
2. Detail Programme Information
You can see detailed information about the current programme.
Press the i
button where I-plate is displayed to view detailed
information.
Note:
•
•
Press the i button again to hide the information box.
If the Detail information is more than one page, use
button to move to the previous or next page.
**
**
**
**
**
**
GB 19
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
4. Basic Operation
**
4.8 Option List
You can view and confirm detailed information about the current channel and change the information
in necessary.
Note: Press the OPT+
button when the channel list is displayed to view Option List. Then the
following functions in the option list are performed to the current channel where cursor is
located.
1. Add a channel to favourite group
You can add current channels to the favourite group immediately. Also, you can add a channel to
multiple Favourite groups.
1. Press the OPT+
2. Select Favourite using the
or OK button.
3. Select favourite group using the
button.
button, and press the
button and press
the OK
button to register for Favourite Group.
**
**
4. Press the OK
button again on the selected Favourite
Group to release the registered channel.
5. Move to the parent menu using the button to save the
changes automatically.
Note: For detailed information about how to change Favourite
Group's name and how to register Favourite Channel for
the whole channels, refer to Chapter 5.
**
**
**
**
GB 20
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
2. Lock/Unlock a Channel
You can lock or unlock the current channel while watching a programme.
1. Press the OPT+ button.
2. Select Lock using the
button, and press the or OK
button.
3. Select Lock option using the
button, and press the
OK
4. Select Unlock option using the
OK button.
button.
button, and press the
5. You will be prompted to enter your Password. Enter your
password to unlock the channel.
6. Move to the parent menu using the button to save the
changes automatically.
Note: When switching to the Locked Channel, you must enter
the password to watch a programme.
**
**
3. Delete a Channel
You can delete the current channel while watching a programme.
1. Press the OPT+
button.
2. Select Delete using the
button, and press the OK
or button.
3. Select Yes in the confirmation message and press the OK
button.
4. Enter password using the NUMERICAL (0-9) button to
delete the current channel and move to the next channel.
**
**
**
**
GB 21
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
5. Channel List
**
3 types of channel lists are provided for easy and quick channel searching.
TV
The list of all TV channels with 2 sub-groups: one is sorted by channel number, the
other is sorted by channel name.
Radio
Favourite
The list of all Radio channels with 2 sub-groups: one is sorted by channel number, the
other is sorted by channel name.
The list of the favourite channels with 5 sub-groups that You can organise channels by
your private taste.
5.1 Displaying and Switching Channel List
You can display channel list using LIST
button and switch into other channel on the channel
list.
1. Press the LIST
button while watching a programme
to display the selected channel list.
2. Select your desired channel using the
button and
press the OK
button to change the channel.
3. Enter the channel numeric directly using NUMERICAL
(0-9) button to move cursor into your desired channel. And
then press the OK
button to change into the selected
channel.
**
**
4. Select On by going to MENU - Preferences -
Miscellaneous Settings - Option in CH List to display
scramble icon in the channel list.
Select OFF by going to MENU - Preferences -
Miscellaneous Settings - Optoin in CH List to display
only channel list without scramble icon.
**
Note:
•
If there are multiple channels, press the PAGE-/PAGE+
Whenever you press the TV/RADIO button while the channel list is displayed, the
channel list will be switched between TV and Radio channel list.
button to move by channel.
•
**
**
**
**
GB 22
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
5.2 Changing Channel List Group
You can select channel list by group.
1. Press the button while the channel list is displayed to
view the group list.
2. Select your desired channel group using the
to display its sub-groups.
button
3. Press the OK
or button, select your desired
button, and then press the OK
sub-group using the
button.
4. The channel list for the selected sub-group is displayed.
Note:
**
**
•
•
The sub-group of Favourite channel list may exist or not depending on your configuration.
If Within the Current Channel List option is selected from MENU - Edit channels - Channel
Change Mode menu, you can only change programme within the selected channel list using
the CH-/CH+
while your watching a programme.
**
**
**
**
GB 23
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
5. Channel List
**
5.3 Edit Channels
You can edit all channels or each channel by channel list group.
1. Press the MENU button.
2. Select Edit Channels using the
the OK or button.
3. Select Edit Channel lists using the
press the OK or button.
button, and press
button, and
4. You will be prompted to enter your password. Enter your
password using NUMERICAL (0-9) button.
Note:
•
Press the BACK
or button to save the changes and
return to the previous menu, press the MENU
or EXIT
button to exit the menu screen.
•
You can easily navigate all menus using the assigned
numeric for each menu. Press the MENU - 2 - 1 in order at
remote control to select Edit Channel Lists menu.
**
**
1. Select a Channel Group
You can select the channel list group to edit. TV and Radio sub-groups can be selected.
1. Press the OK
or button in group to display Channel
List Group.
2. Select your desired Channel List Group using the
button, and press the OK
button.
Note:
•
Press the TV/RADIO
button to move to TV or RADIO channel list directly.
•
For editing Favourite channel list, move to MENU - Edit Channels - Edit Favourite
Channels menu.
**
**
**
**
GB 24
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
2. Delete Channels
You can delete one or more channels.
1. Move the cursor to the channel list using the
button.
2. Select your desired channel, and then press the OK
button to delete the channel(s). You can select multiple
channels.
3. Select Delete in the right using the button, and press the
OK
button.
3. Lock/Unlock Channels
You can lock or unlock one or more channels.
1. Move the cursor to the channel list using the
button.
2. Select your desired channel, and then press the OK
button to lock/unlock the channel(s). You can select
multiple channels.
3. Select Lock in the right using the button, and press the
**
**
OK
button.
Note:
•
Only if locked channel(s) is selected or all channels are
locked, Lock is switched into Unlock. When you press
Unlock, locked channel is switched into unlocked channel.
•
Enter password using the NUMERICAL (0-9) button to
watch locked channel.
4. Select/Unselect All Channels
You can select/unselect all channels at a time.
1. Select Select All in the right and press the OK
button to select all channels.
2. Select Unselect All in the right and press the OK
button to unselect all the selected
channels.
**
**
**
**
GB 25
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
5. Channel List
**
5.4 Edit Favourite Channels
You can edit Favourite channel or Favourite channel list.
1. Press the MENU button.
2. Select Edit Channels using the
the OK button.
3. Select Edit Favourite Channels using the
button, and press
button,
and press the OK
or button.
Note:
•
Press the BACK
the MENU
or button to save the changes and return to the previous menu. Press
or EXIT button to exit the Menu screen.
•
You can easily navigate all menu items using the assigned numerical button for each menu.
Press the MENU - 2 - 2 in order on the remote controller to select the Edit Favourite
Channels menu.
**
The buttons for editing the Favourite channel list are described in the following table.
**
**
**
**
Add
Adds Favourite channel.
**
**
Remove
Removes from the Favourite channel.
**
**
TV/RADIO
Switches between TV and Radio channel list.
**
**
Fav.Group
Changes Favourite channel list group.
**
**
Move
Moves the order of channel list within the Favourite channel list.
**
**
Rename
Renames the name of Favourite channel list.
**
**
Sort
Sorts channels by number or name in all TV/Radio channel list.
**
**
Unselect All
Unselect all the selected channel.
**
**
**
**
GB 26
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
1. Add/Remove favourite channels
You can add favourite channel(s) to a specific Favourite channel
list or remove the added favourite channel(s) from the list.
1. Select Favourite Group using
2. Select your desired channel(s) in all TV/Radio channel list,
and press to add Favourite channel(s).
3. Select your desired channel(s) in Favourite channel list,
and press to remove Favourite channel(s).
.
Note: You can switch between TV and Radio channel list using
TV/RADIO button or at remote control.
2. Move favourite channels
**
**
You can move favourite channel(s) to your desired location within
the Favourite channel list.
1. Select Favourite Group using
.
2. Select your desired channel to move within the Favourite
channel list and press the OK
3. Select , and press the OK
button.
button.
4. Move the cursor to your desired location using the
button, and press the OK button.
5. The selected channel(s) is moved to the desired location
you selected.
3. Rename a favourite channel list
You can rename Favourite channel list.
1. Select Favourite group to rename using
.
2. Select , and press the OK button.
3. Enter the Favourite channel list name using the keyboard
displayed on the screen.
**
**
**
**
GB 27
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
5. Channel List
**
4. When finishing entering the Favourite channel list name,
select OK, and press the OK
button.
4. Additional Features
Additional Features provides many useful functions which are necessary to add Favourite Channel.
**
Change between TV and Radio channel list
You can add not only TV channel(s) but also Radio channel(s) to Favourite channel list. Press
switch all channel list into TV or Radio channels.
to
Note: You can also change into TV or Radio channel by pressing TV/RADIO
button at remote
controller.
**
Select a favourite channel list
**
**
You can select your desired Favourite channel list to edit. Press
to display the Favourite channel list. Then select your desired
channel list using the
button, and press the OK
button.
**
Sort a channel list
You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel
searching. If channel lists are sorted by channel number, is displayed. When you press this
button, all the channel lists are sorted by name. Or, if channel lists are sorted by channel name,
is switched into
. Press this button to order channels by number.
**
Unselect all the selected channels
Press
button to unselect all the selected channel.
**
**
**
**
GB 28
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
5.5 Channel Change Mode
You can change the channel either in the group or in the entire groups while watching a programme.
1. Press the MENU button.
2. Select Channel Change Mode using the
and press the OK or button.
3. Select All Channels or within the current channel list
button,
using the button, and press the OK button.
Note: When Within the current channel list in Favourite Group option is selected, you can only
change the channel within the current channel list. To change the channel in another
channel list in which the current channel list is not located, change the channel list or select
All channels option.
**
**
**
**
**
**
GB 29
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
6. Programme Guide
**
The Programme Guide displays programme information about each channel, based on the date and
time.You can also schedule your watching using the information given.
**
6.1 Viewing Programme Guide Information
You can view programme information for all channels.
1. Press the GUIDE
2. Move to previous or next programme within the same
channel using the button.
button.
3. Move to another desired channel using the
button. If
there are multiple channels, use PAGE-/PAGE+
button to move to channels by page. Also, you can enter
your desired channel number using the NUMERICAL (0-9)
button on the remote controller to move to the channel
directly.
4. Select your desired programme, and press the OK
button. Then you can watch the programme if it is on air, or
you can reserve it if it is the following programme.
5. Press the i
button in the selected programme to view
Extended Information for the selected channel.
**
**
**
1. Viewing Guide Information by Groups
You can view programme information for desired channel list by groups.
1. Press the GUIDE
button.
2. Press the Red button to display the channel list group.
3. Select your desired channel list group using the
button to display the appropriate sub-group.
4. Move the cursor to the sub-group using the button, select
your desired sub-group using the
press the OK button.
button, and then
5. The Programme Guide for selected channel list is
displayed.
**
**
**
**
GB 30
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
2. Viewing Programme Information Using Time Bar
You can quickly search for your desired time zone using the Time bar.
1. Press the GUIDE
2. Press the Green button to display Time Bar.
3. Select the Time Bar button using the button, and
button to move as your desired amount
button.
press the OK
of time. If you press the button repeatedly, the same
operation is repeated.
4. Each button functions as follows.
Now
Moves to the current programme where the cursor is located.
Moves to the previous programme or 30 minutes before.
Moves to the next programme or 30 minutes after.
Moves to 2 hours before.
Moves to 2 hours after.
Day
Day
Moves to one day before.
Moves to one day after.
**
**
5. Select
button and press the OK
button to exit the Time Bar.
Note: Guide provides programme information from the previous day to the next 7 days.
3. Reserving (Reserving a Watching)
You can automatically reserve your desired programme by selecting the scheduled programme and
pressing the OK
button.
1. Select the desired programme and press the OK
button. The following message will be displayed.
2. Select Yes and press the OK
button to reserve the
programme. When a reservation has been completed, the
icon is displayed on the reserved programme.
3. Select No and press the OK
button not to reserve the
programme.
4. If the channel is locked, parental controlled or restricted by
watching time, you will be prompted to enter your
Password. Enter your Password to complete the
reservation.
**
**
**
**
GB 31
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
6. Programme Guide
**
6.2 Finding a Programme
You can find your desired programme by programme name or genre easily.
1. Press the GUIDE button.
2. Press the Blue button to display Find screen.
3. Enter the programme name directly using the keyboard
displayed on the screen.
4. When completing entering programme name, select the
Find button, and press the OK
5. If you select your desired programme from the results of
finding programme screen and press the OK button,
button.
you can watch the programme if it is on air, or you can
reserve your programme if it is scheduled(the following
programme).
6. Select By Genre and press the OK
button to search
button.
**
**
programme by genre.
7. Select your desired genre and press the OK
8. As the result screen of Find programme by Name, select
your desired programme from the Results of Finding
Programme screen and press the OK
button to watch
the programme immediately or reserve the programme.
Note: If you press Previous or Next button on the Keyboard
displayed on the screen, the keyboard layout is switched.
Note: The results of the finding programme may differ depending on the provided programme
information.
**
**
**
**
GB 32
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
6.3 Viewing Reserved Programme
You can add or edit reserved programmes by viewing the reserved programme list.
1. Press the GUIDE button.
2. Press the Yellow button to display the Schedule screen.
3. Select the scheduled programme and press the OK
button to edit the reservation information.
4. Select vacant list and press the OK
button to add a
new reservation schedule.
**
**
**
1. Editing a Reserved Programme
1. Change the reserved Start Time using the
button and
button and
the NUMERICAL (0-9) buttons.
2. Change the reserved End Time using the
the NUMERICAL (0-9) buttons.
3. Change the Repeat mode using the
button. The
options are Once, Daily, and Weekly.
4. Select the Delete button and press the OK
button to
button to
button to
delete the reserved programme.
5. Select the Cancel button and press the OK
cancel the editing.
6. Select the Save button and press the OK
complete the editing.
**
**
**
**
GB 33
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
6. Programme Guide
**
2. Adding a Reservation
1. Enter your desired channel number using the
NUMERICAL (0-9) button. The channel name is
automatically displayed by channel number.
2. Enter your desired Start Time using the
button and
the NUMERICAL (0-9) button.
3. Enter your desired End Time using the
button and the
NUMERICAL (0-9) button.
4. Select one of repeat mode options among Once, Daily, and Weekly using the
button.
5. Select the Save button and press the OK
6. Select the Cancel button and press the OK
button to complete entering.
button to cancel the reservation.
**
Note:
•
You can reserve up to 20 programmes.
•
•
If your desired programmed is already reserved, adjust the reservation appropriately.
If the channel is locked, restricted by watching time, you will be prompted to enter your
Password to complete the reservation.
**
**
**
**
**
**
GB 34
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
7. Setting Preferences
**
You can set censorship, watching time, and all other items suitable for your environment.
Note:
•
•
Press the BACK
the MENU or EXIT
or button to save the changes and return to the previous menu. Press
button to exit the Menu screen.
You can easily select any item from the menu using the NUMERICAL (0-9) buttons.
**
7.1 Parental Control
You can set parental control for each programme and watching time. You can also change your
Password.
1. Press the MENU
2. Select the Preferences using the
the OK or button.
3. Select the Parental Control using the
press the OK or button.
button.
button, and press
button, and
4. When a prompting message is displayed to request your
password, enter the password using the NUMERICAL
(0-9) button.
**
**
**
1. Setting Censorship
Censorship Classification allows you to block programmes according to the age level you have
set.
1. Select the Censorship Classification using the
button, and press the OK
2. Select your desired age level using the
press the OK button.
or button.
button, and
**
**
**
**
GB 35
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
7. Setting Preferences
**
View All
All programmes can be watched because there is no age limitation.
Programmes are blocked for children under the age of 7.
Programmes are blocked for children under the age of 12.
Programmes are blocked for children under the age of 15.
Programmes are blocked for children under the age of 18.
Programmes are blocked without considering the age level.
7
12
15
18
Lock All
Note: You have to enter Password to watch the programme which is blocked by the age level.
**
2. Setting Allow Watch Time
You can block programmes according to the watching time for all the channels.
1. Select the Allow Time Control using the
and press the or OK button.
2. Select Enable or Disable the Allow Time Control using
the button, and press the or OK button.
button,
**
Disable You can watch whenever you want regardless of
Allow Time.
Enable You can watch only while the time specified by
Allow Time.
**
**
3. When you have selected Enable, set the Start and End
Time using the NUMERICAL (0-9) buttons, and press the
OK
4. If you wish to cancel the entered time, select the Cancel
button, and press the OK button.
button.
Note: Once the setting has been completed, you can watch programme only while the time
specified by Allow Time. Or you should enter the Password to watch any programme during
unspecified time.
**
**
**
**
GB 36
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
3. Change Password
You can change the existing Password into new one.
1. Select Change Password using the button, and
press the or OK button.
2. Enter New Password using the NUMERICAL (0-9)button,
and press OK button.
3. Enter the New Password again to confirm the Verify
Password, and press the OK button.
Note: The Default Password is "0000". If you have forgotten
your Password, please contact your local product
distributor.
7.2 Language Setting
You can set Language for Menu, Audio, and Subtitle.
1. Press the MENU
2. Selec Preferences using the
OK or button.
3. Select Language Setting using the
press the OK or button.
button.
button, and press the
button, and
**
**
1. Menu Audio/Subtitle Language
You can set the language for Menu Audio and Subtitle. Default language is English.
1. Select Menu Audio/Subtitle Language using the button.
2. Press the or OK button to display the available Language List.
3. Select your desired language using the button, and press the OK
button.
**
**
**
**
GB 37
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
7. Setting Preferences
**
2. Subtitle Display
You can select whether or not to display the Subtitle if provided.
1. Select Subtitle Display using the button.
2. Presse the or OK button to display the Auto or Manual option.
3. Select your desired option and press the OK button.
**
Auto
Subtitles are displayed automatically in the predefined subtitle language.
Manual
Subtitles are displayed in the language when you select the subtitle language by
pressing the Subtitle
button at remote control.
3. Subtitle Font
**
You can select the Subtitle font.
1. Select Subtitle Font using the
button.
2. Press the or OK
button to display the Variable or Fixed option.
button.
3. Select your desired option and press the OK
**
Variable
Fixed
Uses the horizontally variable Subtitle Font.
Uses the fixed Subtitle Font.
**
**
**
7.3 Time Setting
You can specify the current time and Power On/Off time.
1. Press the MENU button.
2. Select Preferences using the
OK or button.
3. Select Time Setting using the
OK or button.
button, and press the
button, and press the
**
**
**
**
GB 38
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
1.Setting Current Time
You can set the GMT Offset for current time.
1. Select GMT Offset using the
button.
2. Press the or OK button to display GMT list. GMT is
changed by from 30 minutes to 1 hour.
3. Select your GMT offset using the
buttons, and press
the OK
button.
Note:
•
The current time is set automatically whenever GMT Offset changes.
•
The default item is Auto. If GMT Offset is Auto, it is automatically set depending on your
country.
2. Power On
You can set the time when the product is automatically powered on.
1. Select Power On using the
the or OK button.
button, and press
**
**
2. Select either Enable or Disable the Power On
Control.
**
Enable
Disable
Uses the Power On Control and sets the
Power on time.
Not uses the Power On Control.
3. If Enable has been selected, enter the Channel No
and Time using the NUMERICAL (0-9) buttons, and
press the OK
button.
**
**
**
**
GB 39
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
7. Setting Preferences
**
3. Power Off
You can set the time when the product is automatically powered off.
1. Select Power Off using the button, and press the or OK
button.
2. Select either Enable or Disable the Power Off using the
button, and press the OK
button.
**
Enable
Disable
Uses the Power Off and sets the Power Off time.
Not uses the Power Off.
3. If Enable has been selected, enter the Time using the NUMERICAL (0-9) buttons, and press
the OK button.
Note: Once Power On/Off is specified, it is repeated everyday.
7.4 Schedule
You can reserve a programme to watch programme at your desired time.
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select Schedule using the
the OK or button.
button.
button, and
button, and press
**
**
4. Reserved Pregoramme List is displayed on the
screen. To edit the existing reservation, select your
desired reservation, and press the OK
add a new reservation, select a blank list and press
the OK button.
button. To
Note: For detailed information about Schedule, refer to Chapter 6.3 Viewing Reserved
Programme.
7.5 A/V Control
You can set Audio or Video Output Control.
1. Press the MENU
2. Select Preferences using the
OK or button.
3. Select AV Control using the
OK or button.
button.
button, and press the
button, and press the
**
**
**
**
GB 40
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
1. TV-SCART/VCR-SCART
You can set TV/VCR-SCART Output.
1. Select TV-SCART or VCR-SCART
button, and press the OK
button, and press the OK
or button.
or button.
2. Select one option using the
2. Audio Output
Set the Audio Output.
1. Select Audio Output
button, and press the OK
or button.
button.
2. Select one option form Stereo or Mono using the
3. Audio Output Format
You can select the priority of audio.
1. Select Audio Output Format using the
2. Press the OK or button to display the PCM or Dolby Digital option.
3. Select your desired option and press the OK button.
button.
PCM
Set when connecting to an audio system without a Dolby Digital, DTS, or other
special decoder.
**
**
Dolby Digital You can listen sound in Dolby Digital mode. However, if you select Dolby Digital,
you cannot change the audio language.
4. Screen Ratio
You can set the aspect ratio of your TV.
1. Select Screen Ratio
button, and press the OK
or button.
2. Select one option from 4:3 or 16:9 using the
button, and press the OK
button.
button.
Note: If 2 options are provided, you can switch the option at a time using the OK
Namely, Whenever you press the OK
button, Screen Ratio is switched between 4:3 and
16:9.
5. Display Format
You can select the Display Format according to TV Screen Ratio.
1. Select Display Format using the button, and press the OK
2. If the Screen Ratio is set to 4:3, you can select one from Auto/Letter box/Center Mode using
the button, and press the OK button.
3. If the Screen Ratio is set to 16:9, you can select one from Auto/Pillar box/Full mode using
or button.
the
button, and press the OK
button.
**
**
**
**
GB 41
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
7. Setting Preferences
**
7.6 UHF Tuning
You can set the UHF channel.
1. Press the MENU
2. Select Preferences using the
OK or button.
3. Select UHF Tuning using the
OK or button.
button.
button, and press the
button, and press the
1. UHF Channel
You can select UHF Channels for the TV. The Channel range and Frequency change according to
PAL Standard.
1. Select UHF Channel using the
button, and press the OK
or button.
button, and press
2. Select channel range based on the following channel criteria using the
the OK
button.
**
CH21-CH69
CH28-CH69
PAL I/G for Europe
PAL B for Europe/Australia
**
**
2. PAL
You can select the channel range and frequency table.
1. Select PAL using the button, and press the OK
or button.
button, and press the OK
2. Select one option among PAL I/PAL G/PAL B using the
button.
3. UHF Offset
You can adjust fine tuning setting.
1. Select UHF Offset using the
button, and press the OK
or button.
2. Select a range between -4~+4 using the
button, and press the OK
button.
**
**
**
**
GB 42
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
7.7 Miscellaneous Settings
1. Press the MENU
2. Select Preferences using the
OK or button.
3. Select Miscellaneous Settings using the
button.
button, and press the
button,
and press the OK
or button.
1. i-Plate Display Time
You can set the duration during which the Information box is to be displayed when you switch the
channel.
1. Select i-Plate Display Time using the
button, and press the OK
or button.
button.
2. Select a value between 1~20 seconds using the
button, and press the OK
Note: When it is set to 'Disable', the i-Plate will not be displayed when you switch the channel.
2. OSD Transparency
**
**
You can set the transparency of On Screen Display.
1. Select OSD Transparency using the
button, and press the OK
or button.
2. Select one option among Disable/25/50/75 using the
button, and press the OK
button.
**
Disable
25, 50, 75
Fully opaque screen
As the number is bigger, the screen is more transparent.
3. Option in CH List
You can set the option of scrambled icon in the Option in CH List.
1. Select the Option in CH List using the
button, and press the OK
button, and press the OK
or button.
button.
2. Select one option from On/Off using the
**
On
Off
Scramble icon display in the channel list.
Scramble icon disappear in the channel list.
**
**
**
**
GB 43
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
8. Installation
**
This chapter describes how to search for channels and a series of procedures.
8.1 Automatic Search
If your receiver is connected to the aerial and television, you can automatically search channels
without entering any other information.
1. Select MENU
2. Select Installation using the
OK or button.
3. Select Automatic Search from Installation menu using the
button, and press the OK or button.
4. Receiver starts to search channels automatically.
button.
button, and press the
**
Search
Wait while the receiver searches for the channels, this may take a few minutes.
1. During operating search, the cursor is located at Stop
Therefore, if you press the OK
button during
searching, the operation is stopped and the channels
found until then will be displayed.
**
**
2. If search operation is successfully completed, and the
channel does not exist, press the OK
button and try to
reset the search operation again if necessary.
3. You can delete unnecessary channels from the searched
channels. Select your desired channels to delete and press
the OK
button. Then select Delete and press the OK
button. To delete all channels, select Select All to
select all channels, select Delete, and press the OK
button.
4. When completing Channel Search and deleting
unnecessary channels, select Save to save the changes.
**
**
**
**
GB 44
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
8.2 Manual Search
You can search channels manually by searching parameters, if you know the MUX information.
1. Channel Number
Enter your desired frequency channel to search. When entering frequency channel value, the
appropriate frequency value is entered.
1. Select Channel using the
button, and press the OK
or button.
2. Select one of channel using the
button, and press
the OK
button.
2. Frequency
Enter the your desired frequency to search directly. When entering frequency, the appropriate
channel for the entered frequency is automatically displayed on Channel.
**
**
1. Select Frequency using the
OK or button.
2. Enter frequency using the NUMERICAL (0-9) button and
press OK button.
button, and press the
3. Network Search
If specified frequency channel information and other channel information are provided together, the
channel, which belongs to other frequency channel, is also searched.
1. Select Network Search using the
the OK or button.
button, and press
2. Select one option between Enable and Disable using the
button.
**
**
**
**
GB 45
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
8. Installation
**
8.3 Default Setting
Default Setting restores the receiver to the default settings.
Warning: Please note that once you perform Default Setting, all data such as Channel List, and
User Configured data are deleted.
To perform Factory Default:
1. Press the MENU
2. Select Installation using the
OK or button.
3. Enter Password using the NUMERICAL (0-9) button.
button.
button, and press the
4. Select Default Setting using the
OK or button.
button, press the
5. Select Yes and press the OK
setting to Factory Default.
button to restore all
Select No and press the OK
or BACK
button to
return to the previous menu.
6. Confirm again to start loading default setting. Enter
Password using the NUMERICAL (0-9) button to perform
restoring.
**
**
7. When completing the default setting, press the OK
button to automatically run the Installation Wizard.
When default setting is completed, Installation Wizard is
automatically displayed, which helps Channel Search. For
detailed information about Installation Wizard, refer to 3.
Installation Wizard.
**
**
**
**
GB 46
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
8.4 Antenna Power
When you connect an active antenna to the ANTENNA IN connector on the rear of the receiver.
1. Press MENU button.
2. Select Installation using the
OK or button.
button, and press the
3. Select Antenna Power from Installation menu using the
button.
4. Press the OK
or button to select On or Off.
On 5V power supply from the active antenna cable.
Off No power supply.
**
**
**
**
**
**
GB 47
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
9. Software Update
**
In order to maintain proper performance of this product, it is essential to have the most up to date
software. The latest news and release of software versions may be found at Humax website -
It is recommended that you periodically check for the availability of software upgrade.
9.1 OTA (Over the Air)
OTA, an abbreviation of "over the air", means that downloads the software where the manufacturer
reserves the right to decide when and where to release through aerial.
Over the Air(OTA) is simply another alternative for downloading software versions. However, the
manufacturer reserves the right to decide when and where this software update can take place by
"beaming" latest software versions over the air via aerial. The software update via aerial will only
occur under the following circumstances.
1. The equipment should have appropriate loader software.
Caution: Please note that if you don't have normal loader software, the equipment may not
be updated or work after software update.
2. The manufacturer decides to release software downloading via a designated aerial
3. The equipment must be "tuned" properly to the same aerial that the manufacturer uses.
4. Update software when the quality of receiving signal strength is high. If the weather is not so
good that the quality of receiving signal strength is not recommendable, perform the software
upgrade later.
**
**
**
Caution:
•
Please be careful to keep the power on and the power cord plugged in during software update.
If the power is off during software update, it may cause fatal damage to the product.
•
Please be careful not to pull out the Signal line (co-axial Cable) during software update.
Update may be interrupted and the product may not work.
**
Note:
•
The product cannot work at all during software update.
It may take 5 ~10 minutes to update software.
•
•
Scheduling operation cannot work during software update.
1. If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK
button to update the software.
3. Starts downloading new software. Please wait until the updated is completed.
4. When completing the software update, the equipment is automatically powered off and on
again.
**
**
**
**
GB 48
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
**
2. If updating software from Menu
1. Press the MENU
2. Select Installation using the
OK or button.
3. Enter Password using the NUMERICAL (0-9) buttons.
4. Select Software Update using the button, and press
the OK or button.
button.
button, and press the
**
3. If new version of software is detected during watching a programme
1. A message will be displayed to notify that new software is
found.
2. Select YesOff. and press the OK
button to start
button to
upgrading. Select No and press the OK
return to the previous menu.
Select Later and press the OK
button to update later.
**
**
That means the update menu display as soon as you turn
on the receiver next time.
**
4. If using Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1. Select Automatic from Software Update Menu screen
using the
button, and press the OK
or button.
2. Automatically search for new software. Select Stop and
press the OK button to finish Search.
3. When detecting update software, the following result is
displayed. If new software is not found by Automatic, use
Manual Update.
**
**
**
**
GB 49
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
9. Software Update
**
4. Select Yes and press the OK
Select No and press the OK
button to start updating.
button to return to the
previous menu without updating.
5. When completing the software update, the product is
automatically powered off and on again.
5. Manual Update
You can perform Manual Update only if you know MUX information of software update correctly.
1. Select Manual Update from Software Update screen
using the
**
button, and press the OK
or button.
Select the channel number which provides update
software. You can also enter the frequency instead of
channel number in which updated software is provided.
Note: How to setting parameters in Manual Update is
the same as how to set parameters in Manual
Search. Refer to Manual Search.
2. Select Search and press the OK
button to search
**
**
software.
3. It is displayed whether or not New Software exist.
If new software does not exist, press the OK
return to the Manual Update Menu.
button to
4. Select Yes and press the OK
Select NO and press the OK
previous menu.
button to start updating.
button to return to the
5. Performs Software Update. Please wait until it is
completed.
6. When completing the software update, the product is
automatically powered off and on again.
**
**
**
**
GB 50
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
9.2 S/W Update from PC
You can connect your receiver to the PC directly and update your software by transferring the new
software from the PC. Follow these steps to download new software from PC to this product.
1. Download new software file (HDF files) equivalent for this product model from our website into
your computer(http://www.humaxdigital.com).
2. Download and install download tool file from our website into your computer.
3. Connect your PC to this product with RS-232C serial cable.
4. Execute installed download tool, and then follow the instructions contained the download tool.
5. Press the STANDBY
button to make this product operating.
**
**
**
**
**
**
**
GB 51
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
10. System Information
**
You can view all system information, signal strength and quality.
1. Press the MENU button.
2. Select System using the
button, and press the OK
or button.
10.1 Status
You can view System information
1. Select Status using the
or button.
button, and press the OK
2. Confirm the information about Hardware Version,
Software Version, Loader Version, System ID, Update
Date, Terminal Serial Number and Viaccess Version.
10.2 Signal Detection
**
**
You can view the signal strength and signal quality receiving for the channel that is currently on AV.
1. Select Signal Detection using the
button, and press the OK
or button.
2. Displays the Signal Detection information.
10.3 Conditional Access
You can view the current status of conditional access.
1. Select Conditional Access using the button, and
press the OK or button.
2. Confirm the information.
**
**
**
**
GB 52
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
11. Games
**
This product provides various games for user's entertainment.
1. Press the MENU
2. Select Games using the
3. According to the instruction displayed on screen, you can enjoy the game using
and OK button.
button.
button, and press the OK
or button.
Note: Press the EXIT
or BACK
button to exit the game.
**
**
**
**
**
**
GB 53
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
12. Manipulating your TV using Remote Control
**
You can manipulate TV using the remote control provided by Humax.
Note: This function may not be supported depending on TV model.
TV code setting
Note: While you are setting TV code, please keep pressing TV button.
1. Point remote control towards the remote control receiving parts of TV.
2. Press the TV
button, and the TV button LED blinks once.
Keep pressing TV button for 3 seconds, then TV button LED turn on.
Press three numbers of TV code using the NUMERICAL (0~9) button orderly.
Refer to the following Code for TV manufacturer.
3. TV button LED blink twice when you detach your finger from the TV button.
4. TV power turns on or off when the setting is completed.
**
[Code for TV manufacturer] Table
**
**
**
**
**
**
**
GB 54
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
**
**
**
**
**
**
GB 55
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
12. Manipulating your TV using Remote Control
**
**
**
**
**
**
**
GB 56
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
**
**
**
**
**
**
GB 57
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
12. Manipulating your TV using Remote Control
**
**
**
**
**
**
**
GB 58
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
**
**
**
**
**
**
GB 59
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
12. Manipulating your TV using Remote Control
**
**
**
**
**
**
**
GB 60
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
**
**
**
**
**
**
GB 61
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
12. Manipulating your TV using Remote Control
**
**
**
**
**
**
**
GB 62
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
13. Menu Map
**
**
**
**
**
**
**
GB 63
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
14. Trouble Shooting
**
14.1 Trouble Shooting
Before contacting your local service, please make sure following instructions. If the product does not
work normally after completing the following trouble shooting, please contact your local product
distributor or service center.
1. No message is displayed on the front panel or product has no power
- Check the main power cable and check that it is plugged into a suitable power outlet.
- Check whether Power Switch is On.
2. No picture
- Make sure that the product is in Operation Mode.
- Make sure that the AV Cable is firmly connected to the TV.
- Make sure that aerial line is correctly connected to the equipment.
- Check the brightness level of TV.
- Check the channel is on air.
3. Poor picture & sound quality
- Install aerial where there is not obstacle ahead.
- Make sure to avoid putting mobile phone or mircrowave oven near around the equipment.
- Use 75 coaxial cable to connecting TV and aerial.
4. No or poor sound
- Check the volume level of the TV.
- Check the Mute status of the TV and product.
- Press the Audio button to change the Sound Track type.
**
**
5. Remote control does not operate
- To manipulate the equipment with remote control, the remote control's emitting part should
directly point towards the receiving part of receiver's remote control.
- Check the battery of Remote control.
6. Reservation is unavailable
- Check whether it it not overlapped with other reservation.
- Check whether the power switch is off.
**
**
**
**
GB 64
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
14.2 Error Message
Error message
No or bad signal
Possible causes
What to do
Adjust aerial.
The aerial is not pointing properly.
Check the cable from the aerial.If you
cannot resolve the problem you may
need to have your aerial and
installation tested by a professional.
The channel is
scrambled or not
available.
The channel has signal, but no audio Confirm if the channel is currently on
or video.
air.
The channel is not deleted by
broadcasting company.
The channel is for data broadcasting. Cannot watch the channel in usual
way.
The channel is
scrambled.
This digital terrestrial receiver does
not support the service that enables to
descramble the scrambled channels.
The audio is not
available.
The channel has signal, but no Audio. Press the Audio button to confirm if
the channel has Audio.
**
**
**
**
**
**
GB 65
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
15. Specification
**
Tuner & Channel
Input Connector
RF Loop through Output connector
Frequency Range
Signal Level
IEC-Type, IEC 169-24, Female
IEC-Type, IEC 169-24, male
470MHZ to 862MHz (UHF)
-10 to -70dBm
Demodulation
OFDM
Mode
2K, 8K
FEC mode
1/2, 2/3, 3/4, 5/6 & 7/8
1/4, 1/8, 1/16 & 1/32
Guard Intervals
MPEG Transport Stream A/V
Decoding
Transport Stream
Profile Level
MPEG-2 ISO/IEC 13818
MPEG2 MP@ML
Input Rate
15 Mbit/s Max
Aspect Ratio
Video Resolution
Audio Decoding
Audio Mode
4:3, 16:9 Letter box
720 x 576
MPEG/MusiCam Layer I & II
Single /Dual mono/ Stereo /Joint stereo
**
**
**
**
**
**
GB 66
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
**
**
Memory
Flash Memory
Graphics (MPEG) & System Memory
EEPROM
2 Mbytes
8 Mbytes
8 Kbytes
RF-Modulator
RF/Loop-through Output Connector
Frequency
75 , IEC 169-2
470 ~ 862 MHz
CH 21 ~ 69
PAL I/G/B
Output Channel
TV standard
Preset Channel
A/V & Data In/Out
Video
CH 36
1 Output RCA
Audio R/L
2 Output RCA
RS-232C
Transfer Rate: 115,200 bps, 3 pin Socket type
Power Supply
Input Voltage
AC 90 ~ 250V, 50/60Hz
**
**
Type
Switching Mode Power Supply (SMPS)
Operation mode : Max. 10 W
Power Consumption
Stand-by mode : Max. 5 W
Protection
Separate internal fuse & Lightning protection
Physical Specification
Size
260 mm X 50 mm X 182 mm
1.2 kg
Weight (Net)
Operating Temperature
Storage Temperature
0
to +45
to +70
-10
**
**
**
**
GB 67
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
16. Glossary
**
Aerial
A device that collects and amplifies electromagnetic waves. Also called "Antenna"
**
Coaxial cable
A specially designed and shields cable that can transport signals with high frequency.
**
Frequency
The number of cycles or events per one second, which is expressed in the unit of hertz
**
FTA (Free- To-Air)
An unscrambled broadcast, which you can view without additional payments to a service provider.
**
MUX
The transmitter/frequency/channel where the programme provider/operator transmit a package of
digital channels/services. Usually there are several MUX frequencies with different or same content.
**
Network
The collection of channels/services that a programme provider/operator offer. These services may
be transmitted from one or several MUXes. In the transmitted data stream the operator may transmit
a service information table(network information) that is informing the digital terrestrial receiver about
all available services in the network
**
**
**
OSD (On Screen Display)
The function that displays the information about the monitor that the user needs or has to know on
the screen directly. OSD information includes brightness, contrast, tuning, RGB adjustment, and
screen size and positions (top, left, width, and height), and so on.
**
OTA (Over The Air)
Means that software downloads where the manufacturer reserves the right to decide when and
where to release them through aerial.
**
SCART
A 21-pin connector used for connection of this product, VCR and TV. Also called Euroconnector or
Peritel connector.
**
**
**
**
GB 68
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
17. Service and Support
**
You can get information such as a troubleshooting guide, software upgrades and product support
guide from the following web sites and call center (Hotline).
Please try to contact to your local dealers first when you have any problem.
Web site and e-mail
Homepage
English
Deutsch
Arabic
**
HCSA (Humax Customer Service Area)
Software Download, Information and Technical Q&A
English
Deutsch
**
E-mail (Technical Q&A)
Europe & North Africa
Germany
**
**
Middle East
Asia & Other area
**
**
**
**
GB 69
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
**
**
**
17. Service and Support
**
Call Center
Humax Middle East Call Center (Dubai, UAE)
Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)
E-mail: [email protected]
Open: Local Time in Dubai (GMT+4)
9:00 - 20:00 (Saturday - Thursday, close on Friday)
Support Language: English/Arabic
**
Humax Hotline (Germany)
Germany: 01805 778 870 ( 0,12/Min)
Other Countries: + 49 1805 778 870 ( 0,12/Min+ International Call Charge)
Open: Local Time in Germany (GMT+1)
8:00 - 20:00 (Monday - Friday)
8:00 - 18:00 (Saturday)
Support Language: Deutsch/English
**
**
**
Humax BTCI Hotline (Premiere Model)
Germany: 01805-778900 ( 0,12/Min)
Austria: 0900-900633 ( 0,33/Min)
**
For hardware repair, please refer to support website. (Homepage or HCSA)
**
**
**
**
GB 70
**
**
**
**
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|