Instructions for Installation and Use
Dishwasher
Model BFV680
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Contents
Electrical Connection
For Your Safety
3
4
Installation
5
Getting to know your Dishwasher
The Controls
6
6
How to use your Dishwasher
Programme Chart
7
8
Before Using your Dishwasher
Loading your Dishwasher
Care and Cleaning
Troubleshooting
9-10
11
12
13
Information for Test Labs
After Sales Service
Hotpoint Guarantee
Key Contacts
14
15
16
Back Cover
Retention of this Instruction Book
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the
appliance.
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also
provided so the new owner can become familiar with the appliance and safety warnings.
If the Book is lost or damaged a copy may be obtained from:
MerloniElettrodomesticiUKLtd.MorleyWay,Peterborough,PE29JB.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Electrical Connection
WARNING:Thisappliancemustbeearthed.
Safety Information
Fuses
At the time of delivery...
Your appliance comes fitted with a plug and a 13A fuse. If you need to
replace the fuse, only those rated at 13A and ASTA approved to
BS1362 should be used. If you lose the fuse cover, a replacement
may be obtained from your local authorised Service Centre or
Electrical company. Correct replacement is identified by colour coding
or the marking on base of plug.
All functions of your dishwasher have been thoroughly tested at the
factory. A small number of water marks may have been left as a
result, they will disappear when the appliance is used for the first time.
WARNING:Thedishwashermustnotbeconnectedtotheelectricity
supply while installation is being carried out.
WARNING: DO NOT use the plug unless the fuse cover is fitted.
-
This appliance should only be connected to a 230/240V AC
source, via a properly installed earthed socket.
Use the dishwasher solely in a domestic environment.
DO NOT stand or place heavy objects on the door when it is
open, this could damage the door or cause the appliance to tip
forward.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your socket.
-
-
WARNING:ToavoidashockhazardDONOTinsertthediscardedplug
into a socket anywhere else.
IMPORTANT:WIRESINTHEMAINSLEADARECOLOUREDIN
ACCORDANCEWITHTHEFOLLOWINGCODE:
If your family includes children...
Green/Yellow
Blue
-
-
-
Earth
Neutral
Live
-
DO NOT allow children to play with the appliance or tamper
with its controls.
Brown
-
Keep detergents and rinse aids away from children. Keep
children away from the open door of a dishwasher, there could
still be some detergent left inside.
If you change the plug, the colour of the wires in the mains lead may
not correspond with the terminal markings in the plug, which if not
coloured, could be:
EARTH
NEUTRAL
LIVE
‘E’ or
‘N’
‘L’
CAUTION:
Changing the Mains Lead
The dishwasher meets the requirements set out by the regulations in
force concerning safety and electrical equipment.
Any technical checks should be conducted exclusively by a trained
and authorised technician: Repairs carried out by unaithorised
persons will invalidate the guarantee, as well as posing a potential
hazard to the user.
A lead can be ordered from Hotpoint Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
If you have damaged the existing lead or require a longer one a
charge will be made. It is strongly advised that this work is carried out
by a qualified electrician.
The manufacturer declines all responsibility for damage to persons or
property resulting from failure to observe the above precautions, from
tampering with even a single component or from the use of non-
original spare parts.
If the domestic wiring includes a residual current-operated circuit
breaker, ensure that it conforms to the latest regulations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
For your Safety
Thismanualformsanintegralpartoftheappliance. Itmustalwaysbekepthandyforreference. Readthroughalltheinstructionscontainedinthismanual
beforeusingthedishwasher.
Installation must be performed by a qualified technician, in compliance
with the regulations in force, including the prevention and elimination of
radio frequency interference.
The dishwasher is designed for washing and drying dishes, any
other use shall be considered improper. The manufacturer declines
all responsibility for uses other than those described above.
1. Seperate the various 7. DO NOT install outdoors, not
packaging materials and
dispose of safely - DO NOT
leave discarded packaging
materialaroundthehome.
even if the area is covered by
a roof: it is extremely
dangeroustoleaveitexposed
torainandthunderstorms.
2. Afterremovingthepackaging, 8. If installed on a carpeted or
check to make sure your
appliance is intact. If in doubt,
covered floor, ensure that the
openingsontheundersideare
notobstructed.
contact
a
qualified
professional.
3. DONOTuse extensionleads
and multiple plugs. If the
9. Do not touch the heating
elementduringorstraightafter
a wash cycle.
electricity supply wire is not 10. Iftheappliancemalfunctions,
long enough, then have it
replacedwithoneofthecorrect
length and remember that it
should be free of bends or
dangerouskinks.
turnoffthewaterinlettapand
disconnecttheplugfromthe
wallsocket. Thenreadthe
sectionentitled
"Troubleshooting". Ifyou
cannotresolvetheproblem,
thencallHotpointService
(seeKEYCONTACTS, back
page).
4. In the event of any damage to
the power cord have it
replaced by a qualified
technician.
5. Themainsplugmustbeeasily
accessibleafterinstallation.
6. Iftheapplianceisnotoperating
properly or if maintenance
operations are necessary,
disconnect the dishwasher
from the mains power supply
(unplugit!).
Theratingplate,featuringthe
technicaldata,serialnumber
andmarkings, isvisibly
positionedontheinneredgeof
thedoor.
DONOTremovetheratingplate.
The dishwasher is intended for use by adults. DO NOT allow children
to come near or play with the controls.
Keep children away from detergents and clear of the dishwasher door
whenopen.
Keep all packaging material away from children.
1. DO NOT use solvents, such as alcohol or turpentine which may
causeanexplosion.
2. DONOTloaddishestowashthataresoiledwithash, waxorpaints.
3. DO NOT lean, sit or stand on any part of the dishwasher - this could
causeinjuryand/ordamagetheappliance.
4. DONOTdrinkanywaterresiduesfrominsidethedishwasher.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Installation
Coldwaterconnection.
Choose where you want to install
your dishwasher, you can place it
so that its sides or back panel are
side by side with furniture or up
againstthewall. Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towards the left or right to facilitate
appropriateinstallation.
Drainhoseconnection.
SinkWasteSystem:
Forundersinkdrainage:
Connectthecoldwatersupplyhose
to a 3/4 gas threaded connection,
taking care to screw it tightly onto
the tap. If the water hoses are new
or have been out of use for an
extendedperiodoftime,letthewater
runtomakesureitisclearandfree
of impurities before making the
connection. If this precaution is not
taken, the water inlet could get
blocked, causing damage to your
dishwasher.
WARNING: Connect your
dishwasher drain hose to pipes
which connect to the foul drain
system and not to surface water
drains.
IMPORTANT: For the correct
operation of your dishwasher, it is
essentialtocomplywiththefollowing
information:-
Before connecting the drain hose,
remove any internal restrictions -
Thiswillpreventabuildupofdebris
whichcouldcauseablockage.
Remove any restrictions from the
waste spigot and ensure that the
sealingbungisremoved. Thehose
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
Levelling.
Once the appliance is positioned,
adjustthefeetbyscrewingthemin
or out depending on how high you
want it and to level it so that it is
horizontal. Make sure that it is not
inclinedmorethan2degrees. Ifthe
applianceislevel, itwill helpensure
itscorrectoperation.
Standpipe:
Ensurethatthehoseisnotpushed
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
will prevent the pipe from jumping
outduringinstallationanduse.
Anti-flooding protection
Your dishwasher has a special
system which stops the water
supply in the event of leaks inside
theappliance.
Itisequippedwitha waterinletthat
hasaclearouterhoseandaninner
high pressure hose which turns
bright red if it breaks.
Leaks are prevented as the clear
outerhosenowcontainsthewater.
It is vital that you check it on a
regularbasis,ifyouseeithasturned
bright red, you know you need to
replace it as soon as possible.
Call for an authorised technical
engineertocomeandreplaceit.
NOTE: Ensure the sink outlet
pipe has a minimum diamtere of
32mm.
HeightAdjustment
Insert the appliance into the cutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriver to turn the screws in
the clockwise or anti-clockwise
direction to increase or decrease
the height respectively.
DO NOT position the standpipe
near an electrical outlet.
ENSUREthatthedrainhoseisnot
kinked and it is routed as shown in
thediagram.
1. Untie the end of the GREY
drainage hose from the rear of
the appliance.
2. Reposition the ‘Hooked End
Support’ as required along the
GREYdrainagehose.
3. If fitting an under sink waste
disposal unit, cut out the
membrane, bung or blanking
plug.
4. Attach the GREY drainage
hose to the under sink waste
disposal unit securely, using the
clip and rubber tube supplied.
Adjusting the Back Feet
Insert the appliance into the cutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriver to turn the screws in
the clockwise or anti-clockwise
direction to increase or decrease
the height respectively.
The standpipe should have a bore
of at least 38mm (11/2”). It should
be installed as shown, have a trap
fitted and must discharge into the
same drain system as your
householdsink.
It MUST NOT be connected to a
surfacewaterdrain.
Ensure the drain hose is
securely attached, to prevent
it coming away while the
machine is in use and causing
a flood.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Getting to know your Dishwasher
M
E. Upperbasket
I. Bottom spray arm
J. Salt container cap
K. Washingfilter
E
F
F. Top spray arm
G. Basket height adjuster
H. Lower basket
G
L. Detergent and rinse aid
dispenser
H
J
M. ‘Turbo Dry’ fan
K
I
L
The Controls
D
M
B
H. Delayed start indicator light
This light shows that delayed
start has been set.
A. ON-OFF Button
Press this button to switch the
appliance on.
I. Basket selection button
Pressthistochoosewhetheryou
want the dishes on the lower or
upper rack to be washed.
B. ON-OFF Indicator light
This light informs you that the
dishwasher is on.
C. Door opening handle
Use the handle to open the door.
D. Display
L. Multifunction
indicator
numeric
A
C
Informs you the duration of the
cycle, the amount of time left to
wait or any error codes.
M. Wash programme selector
Turn to select the desired wash
cycle.
Buttons and indicator lights to
program the dishwasher.
E. Salt refill warning light
This light tells you that it is time to
add more salt.
F
E
I
H
P
F. Rinse Aid refill warning light
This light tells you that it is time to
add more rinse aid.
N. Basket indicator
Shows which basket you have
selected.
P. Delayed start select button
Allows you to delay the start of
the selected wash cycle by 1 to
24 hours.
1
2
G. Cyle phase indicator light
(pre-wash, wash, rinses, drying).
N
G
L
Technical Characteristics
Thisdishwasherconformstothe
followingEuropeanCommunity
Directives:
Technical characteristics
Width
cm. 59,5
cm. 57
cm. 82
• 73/23/EECof19/02/73(Low
Voltage)andsubsequent
modifications;
Depth
Height
Capacity
• 89/336/EECof03/05/89
(Electromagnetic
12 standard place settings
Compatibility)andsubsequent
modifications;
Mains water pressure
Power voltage
Total absorber power
Fuse
4,3 psi - 145 psi (30 KPa÷ 1MPa) (0,3 ÷10 bar)
• 97/17/CE
See data plate
See data plate
See data plate
(Labelling)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
How to use your Dishwasher
Modifying a wash cycle in
progress.
You decide when it starts.
Whenyouhaveloadedthedishes,
you can choose when to start your
dishwasherbeforesettingthewash
cycledesired. Pressbutton"P"and
you can delay the start of the wash
cycle by 1 to 24 hours. Press the
buttononce, abeepwillsoundand
the wording "24 h" will come up on
the display. Then, each time you
press the button a beep will sound
andthehourswilldecreasebyone
hour until the delay is 01 h. If you
press the button once again, the
delayedstartisresetand3dashes
appear on the display.
Half load.
First of all.
- Turn on the water supply
tap completely.
- Add the correct amount
of detergent.
- Load the baskets cor-
rectly.
- Check that the spray
arms rotate freely.
- Close the door securely.
Your dishwasher also allows you
to wash half a load (using one
basket), to save water , electricity
and detergent (use only half the
amount).
Beforesettingawashcycle, press
button "I". Each time you press it,
you will hear a beep and symbol
(upperbasket)and
Ifyouhavechosenthewrongcycle
- You can modify the wash cycle, if
it has only just started. Turn knob
"M"totheResetpositionandaftera
fewsecondsyouwillhear4beeps.
Indicator light "G" will go out and 3
dashes appear, this indicates all
settingshavebeencancelled. You
are now free to re-set the correct
wash cycle.
symbol
(lower basket)
appear on indicator "N". Press the
button once more to reset the
basket selection and the
dishwasherwillagainbesettouse
-
Press the ON-OFF button "A":
You've left out a dish?
Interrupt the wash cycle by press-
ing the ON-OFF button, open the
door and insert the dish you had
forgotten, closethedoorandpress
theON-OFFbuttonagain.
indicator light "B" comes on. The
display turns on and 3 dashes ap-
pear, these indicate that the dish-
washer is now awaiting instruc-
tions.
Onceyouhavesetthedelayedstart bothbaskets.
time, select the wash cycle on the
How to programme “extra”
drying
knob: after the beep sounds, you
will see indicator light "H" flash on
the display and the countdown
begins(indicatedonthedisplayone
hour at a time). A quick look at the
indicator lights will keep you
informedofthecountdownprogress
at all times.
The cycle will start up from where
youinterruptedit.
Select the wash cycle.
If you want your dishes to be
perfectlydry, followtheinstructions
below.
Open the door, set the knob to
RESET and make any specific
settings, such as:
turn knob "M" until the indicator is
in line with the number or symbol
for the cycle required.Select the
wash cycle most suitable for the
type of dishes to wash (see ‘Pro-
gramme Chart’).
After a few seconds, you will hear
a short beep: the wash cycle has
started and indicator "G" displays
the cycle phase starting symbol .
The counter "L" will show the
amount of time left until the end of
the wash cycle.
Cycle end
The end of the wash cycle is indi-
catedby2beepsand ENDflashes
uponthedisplay.
Turnknob"M"totheResetposition
andthe3dashesforprogramming
cancellationwillappear.
Turn the appliance off by pressing
the ON-OFF button “A”, thus
switching off the electricity supply.
Turn off the water tap.
Wait a few minutes before unload-
ing the dishes: they are very hot! If
youwaitalittlewhile, theydrybetter
due tothesteam.
-
-
upper or lower rack
delayed start
Have you changed your
mind?
During the countdown, you can
modifythedelaybypressingbutton
"P"repeatedlywithoutresettingthe
wash cycle.
Ifyouhavechangedyourmindand
wish to start the wash cycle
immediately, press button "P" until
the countdown is fully reset.
Indicator light "H" will turn off and
the cycle will start at the sound of a
beep.
Start the wash cycle by turning
the knob: observe symbol for
drying: it will flash for about 4
seconds, while the word "OFF"
appearsonthedisplay(extradrying
disabled).
If you press button "I"immediately,
you will hear a prolonged beep
and the word "ON" will appear on
the display: the extra drying has
beenenabled.
Once you have made your
selection, shut the appliance door;
a beep will sound and the wash
cycle will either start immediately
or after the delay, wherever set.
Remember that with extra drying,
the wash cycle will last longer, to
provide you with drier dishes.
Indicator lights.
Your dishwasher is provided with
an indicator light "G" with 4 sym-
bols which come on as the appli-
ancecarriesouteachphaseofthe
selectedprogramme.
Empty the lower basket first.
There's been a power
failure or you opened the
dishwasher door
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.
These indicator lights represent
eachphasecorrespondingto:
pre-wash, wash, rinses, drying.
At all times your dishwasher tells
you what phase it is at.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
Auto Wash Cycle:the dishwasher is equipped with a Sensor System that measures how dirty the dishes are and decides the most
suitable programme for the load, setting the optimal cycle length, number of rinses and water level. This provides a more efficient and
economicwashcycle.
:DVKꢀF\FOH
GXUDWLRQ
ꢃ“ꢄꢅꢆ
PDUJLQ
ZLWKRXW
H[WUD
'HWHUJHQW
&\FOHꢀVHOHFWLRQ
LQVWUXFWLRQV
IRU
SUHꢁZDVK
ꢂꢀZDVK
&\FOH
&\FOHꢀGHVFULSWLRQ
5LQVHꢀ$LG
GU\LQJꢇ
Very dirty dishes,
pots and pans (not to
be used with delicate
items).
Pre-wash with hot water at 40°C
Extended wash at 65°C.
2 Rinses with cold water
Rinse with hot water at 65°C.
Drying.
ꢈꢂꢉꢈꢀJUꢊ
ꢍꢅꢀJUꢊ
ꢄꢉꢅꢌ
ꢎꢉꢌ
ꢋ
ꢋ
ꢋ
$XWRꢀ,QWHQVLYH
$XWRꢀ1RUPDO
N ormally dirty
dishes, pots and
pans. Standard daily
cycle.
Wash at 50°C.
Cold Rinse
Rinse with hot water at 70°C.
Drying.
Environmentally-frien-
dly cycle, with low
energy consumption
levels, suitable for
normally dirty pans
and dishes.
2 Cold pre-washes
Wash at 50°C
Hot rinse at 65°C
Drying
ꢈꢂꢉꢈꢀJUꢊ
ꢄꢉꢅꢌ
ꢉꢈꢌ
$XWR
Economic and fast
cycle to be used for
slightly dirty dishes.
Run cycle
immediately after use.
Without drying
ꢋ
Short wash at 50°C
Hot rinse at 62°C
(WITH THE
EXTRA
ꢉꢈꢀJUꢊ
except when the
extra drying option
has been selected.
DRYING)
5DSLG
Pre-wash of dishes,
pots and pans while
waiting for the load
to be completed after
the subsequent meal.
Short cold wash to prevent food
residue from drying on the dishes.
ꢄꢉꢌ
ꢏꢐꢌ
6RDN
Special cycle to be
used for delicate
items, which are
more sensitive to high
temperatures.
Wash at 52°C
Rinse at 45°C
Hot rinse at 65°C
Drying
ꢉꢈꢀJUꢊ
ꢋ
ꢋ
&U\VWDOꢀ&DUH
Wash differentiated
on the two racks
delicate for glassware
and glasses on the
upper rack and heavy Hot rinse at 65°C
duty for the pans on
the lower rack.
Cold pre-wash
Wash at 52°C
Lukewarm rinse at 45°C
ꢈꢂꢉꢈꢀJUꢊ
ꢄꢅꢑꢀꢌ
$XWRꢀ'XR
:DVK
Drying
To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill
your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Topreventrustfromforming,
loadthesaltjustbefore
beginningawashcycle.
Before Using your Dishwasher
Adjusting the water softener.
Your dishwasher can adjust its salt
consumptionaccordingtothehard-
ness of the water in your home.
This way, you can optimise and
customise your dishwasher's salt
consumption.
Water Hardness
Salt
Autono-
consu-
Clarke
Selector
position
my
°fH
mmol/l
mption
(grams/-
cycle)
degrees
(cycles\2-
kg)
To adjust salt consumption, do as
follows:
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure): if
necessary, turn the arrow anti-
clockwise from the "-" setting
to the "+" setting.
Select the arrow position
depending on the water
hardness, referring to the table.
0 - 14
0 - 17
0 -1,7
/
0
/
14 - 36 18 - 44 1,8 - 4,4
36 - 71 45 - 89 4,5 - 8,9
"-"
20
40
60
60
40
25
MED
"+"
>71
> 89
> 8,9
You don't know
how hard the
water in your
home is? Ask the
company that
supplies water in
your area.
Salt
Filling the salt container.
Always use salt which is intended
for dishwasher use.
The salt container is situated
underneath the lower basket, fill it
up as follows:
1.Pull out the lower basket
completely, unscrew and
remove the container cap
2. If it is the first time you add the
salt, firstfillthecontainerupwith
water (you won't have to do this
againnexttime)
When should I load the salt?
The salt container should be filled
up when the low salt indicator light
"E"flashes. Onceyouhaveloaded
the salt for the first time, it is normal
thatthelowsaltindicatorlightstays
on or flashes for about 5consecu-
tive cycles.
3. Putthedishwasherfunnelonthe
hole and pour in approximately
two kilos of salt. It is normal that
some water comes out of the
container.
4. Screw the cap back in place
carefully.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Before Using your Dishwasher
B
The detergent
C
•
•
Use the right amount of
detergent (see programme
chart).
Store your detergent and rinse
aid in a cool, dry place, safely
away from children.
D
Addingdetergent
ToopenlidA, pressbuttonB.
Thedetergentshouldbeputintothe
twocontainersCandD.
If using a tablet, put it in container
"D".
25 gr
.
5 gr.
Now you can close the lid: press it
down until you hear it click.
If it won't close
Check whether there is any
detergent residue on the edges of
thedispenser. Removetheexcess.
A
We recommend Glist 3 in 1 for use in all Hotpoint dishwashers...
Brilliantcleaningisguaranteedwith Glist3in1.
Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning and
care.
It is important to use detergent specially designed for domestic dishwashers. (Always follow the
manufacturersinstructions.)
Glist3in1 advanceddishwashertabletswithactiveenzymesaretheidealwaytoprotectandcarefor
yourdishwasher, whilegettingyourdishesandglassessparkingclean.
*If you live in an area particularly
prone to very hard water ( 35
Glist and Hotpoint recommend
that you continue to keep your
dishwasher salt topped up.
°f)
SofterWater:
Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher and
improvethecleaningresult*.
CleanerDishes:
With unique active enzymes in the cleaning phase Glist 3 in 1 breaks down even the hard to shift
foodstuffsandgrease, leavingthedishesspotlessandthedishwashercleantoo.
SparklingResults:
The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.
If you have any questions regardingGlist3in1, please contact the hotline on 0800 216 730.
Rinse aid.
F
C
Rinse aid makes dishes sparkle
moreasitimprovestheirdrying.The
rinseaidcontainerissituatedonthe
inside of the door. You should fill it
up when the rinse aid indicator “F”
lightsuponthecontrolpanel.
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
Addingrinseaid.
D
To open the dispenser, turn cap C
anticlockwise. Takecarewhenyou
pour in the rinse aid to avoid it
overflowing. You can regulate the
amount of rinse aid used by the
dishwasher, move the adjuster F
whichyouwillfindunderlidC.
Youcanchoosefromsixdifferentpositions.
Itisnormallysetto4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Loading your Dishwasher
so that they don’t touch.
First of all.
Load examples
In this specific model, the cutlery
basketisfittedwithtwodetachable
side compartments, as shown in
figureA1, whichcanbehookedon
eithertheupperorlowerbasketas
required.
Beforeplacingdishesinthebaskets,
removeallcoursefoodremains.This
avoids blocking the filter, which
would reduce the efficiency of the
wash.
If saucepans and frying pans are
verydirty,allowthemtosoakbefore
beingwashed.
lowerbasket
upperbasket
What goes into the upper
basket?
Placedelicateandlightweightdishes
in the upper basket: glasses, tea
cupsandcoffeecups, saucersand
plates-shallowsaladbowls,slightly
Tomakeiteasiertoloadyourdishes,
pullthebasketsout.
Multisystem baskets
Thedishwasherisfittedwithupper, dirtyfryingpansandshallowpans.
lower and cutlery baskets. They Positionlightweightdishesinsucha
providegreaterflexibilityforloading way as to avoid their being moved
dishes, makingthemmoresuitable by the spray of water.
for your specific needs.
The dishwasher can also be
The basket handles can be equipped with one or two tip up
removed for cleaning. Pull out the compartmentsontowhichyoucan
two fastening plugs, remove the place mugs and cups, as well as
handles and rinse under running long sharp knives and serving
water. Replace the handles fixing cutlery.
theminplacewiththetwofastening
plugs.
Afterloadingthedishes, remember
to check that the spray arms can
turn freely without hitting against
any dishes.
How to adjust the upper
basket.
Theupperbasketcanbesetinhigh
or low position to enable you to
organise your dishes effortlessly.
What goes into the lower
basket?
Wheretoputthedifferentpartsofthecutlerybasket:
Werecommendyouplacethemost
difficultdishestowashintothelower
basket: saucepans, lids, soup
dishes and plates (a load example
isshowninthephoto).
•
Servingdishesandlargelids:
place them on the sides of the
basket.
Fig.C
•
•
Saucepans,saladbowls:must
alwaysbeplacedupsidedown
Very deep dishes: placethem
obliquely, thusallowingwaterto
run down them and cleaning
thembetter
Glasses and cups: position
themasshowninloadexample
photo.
A1
A
There are two handles on the
sides of the upper basket, use
these to adjust its height (see
fig.C).
B
•
The cutlery baskets can be split up
by pulling out the handle and
removing the clip that keeps the
two parts joined together.
When you only have a little cutlery
to wash you can use just half the
basket, save space for other
crockery or place the other half in
the upper basket instead (see
figures A and B).
Knives and utensils with sharp
bladesortipsshouldbepositioned
with the sharp parts at the bottom.
This basket is equipped with two
removable grids. Insert the cutlery
one by one into the slots, with the
handlesatthebottom.Positionthem
What can I Wash Items not suitable for the dishwasher:
•
•
•
Cutleryandtablewaremadefromwoodorpartwood-Theymaybecomefadedandunsightlyinappearance.
Avoidwashinghornhandledandbronzecutleryinthemachine.
Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns
printedontheseitemswillnotbedishwasherproof.
Plastic objects that are not resistant to hot water.
CopperandPewterutensils. AluminiumandSliverobjects.
Some types of glass can become opaque in appearance after they have been washed too many times in a
dishwasher.
•
•
•
•
•
Highlyabsorbentmaterialssuchasspongesandtowelsshouldneverbeplacedinadishwasher.
If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
WARNING:Dishesorcutlerysoiledwithtobaccoash, wax, lubricatinggreaseorpaintshouldnotbeput
inthedishwasher.
Ourrecommendation:Infuture,onlypurchasetableorkitchenwarethathasbeenconfirmed-dishwasherproof.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Care and Cleaning
Goingaway
DONOTusesolventsorabrasives
tocleantheexteriorandrubberparts
of your appliance, do not use
solvents or abrasive cleaning
products. Useaclothdampened
withlukewarmsoapywateronly.
Ifthereareanystainsonthesurface
oftheapplianceinterior,useacloth
dampened with water and a little
whitevinegar,oracleaningproduct
specificallymadefordishwashers.
Unplug the appliance.
Cleaning the spray arms.
Ifthedishwasherisnotgoingtobe
usedforsometime, carryoutthe
following:
Beforecarryingoutanycleaningor Food residue may become
maintenanceonthedishwasher, encrustedontothesprayarmsand
always remove the plug from the blocktheholeswherewatercomes
• run a cycle with the dishwasher
empty.
• switchoffattheelectricalsocket
andunplug.
• turn off the water supply tap,
disconnect the inlet hose and
allowtodrain.
•filltherinseaiddispenser.
•leavethedoorajar,topreventthe
buildupofunpleasantodours
insidethedishwasher.
electricitysocket.
out.Checkthesprayarmsregularly
andcleanthemonceinawhile.
After every wash.
Whenthewashcyclehasended,
always remember to turn off the
watersupplytapandtoleavethe
appliance door ajar. This way,
moistureandbadodourswillnotbe
trappedinside.
The seals.
One of the factors that cause
unpleasantodourstoforminsidethe
dishwasher is food that remains
trapped in the seals. Periodic
cleaningusingadampspongewill
preventthisfromoccurring.
The filter assembly
Beforeusingthedishwasheraftera
longbreak,pluginandswitchonat
theelectricalsocket.Reconnectthe
inlet hose and turn on the water
supply tap. Check there are no
deposits of rust inside the water
pipe,ifthereareallowwatertorun
from the supply tap for a few
minutes.
• IIf you want consistent good To remove filter “B”, turn it anti-
resultsfromyourdishwasher,you clockwise. Use a small non-
needtocleanthefilterassembly.
metallicbrushforcleaning.
• Thefoodparticlesareremoved Reassemble the filter parts (as
fromthewashwater, allowingitto shown in the figure) and reinsert
be recirculated during the cycle, the whole assembly into the
filteredperfectly. Forthisreason, it dishwasher. Position it into its
isagoodideatoremovethelarger housingandpressdownwards.
food particles trapped inside the
Thedishwasherisnottobeused
semi-circular filter A and cup
without filters. Improper
“C”aftereachwash;toremovethe
replacement of the filters may
filterassembly,pullthecuphandle
reduce the efficiency of the wash
upwards.Allyouneedtodoisrinse
andevendamageyourdishwasher.
themunderrunningwater.
Disconnectingthedishwasher.
Whendisconnectingthedishwasher
itisimportantthattasksarecarried
outinthecorrectsequence.
•switchoffatthemainsandremove
theplugfromthesocket.
• turnoffthewatersupply.
• disconnectdrainandwaterinlet
hose.
• Theentirefilterassemblyshould
be cleaned thoroughly once a
month:semi-circularfilterA+cup
D
C + cylindrical filter B+ microfilter
C
• pulloutthedishwasher,carefully,
withdrawinghosesatthesame
time.
D.
B
Movingtheappliance.
A
1
Drainwaterfromthedishwasher.
Secure all loose parts. Only
transportinanuprightposition.
•Ifnotkeptuprightduringtransport,
anywaterremaininginsidemay
seepintothecontrolmoduleand
causesubsequenterrorswith
programmefunctions.
A
B
2
C
12
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Troubleshooting
Caution
- Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable
equipment damage, as well as danger to the user.
- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.
Switch off at the mains socket and water supply and remove the plug.
Resolving minor problems yourself.
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having
to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again
that much sooner. The following list of common occurences and their remedies should help you identify the causes of
most problems.
If the dishwasher won't
start, check...
■ Isthedishwasherpluggedinat
the electricity socket and
switchedon?
■ Isthereapowerfailure, check
otherappliances.
■ Checkthefuse.
■ Is the water supply tap turned
on?
■ Isthewaterinlethoseconnected
properly?
■ Is the pressure of the water
supplysufficient?
If the dishes fail to dry or
remain dirty, check...
■ thereisrinseaidinsidetherinse
aidcontainer.
■ therinseaiddispensersettingis
correct.
■ the detergent being used is of
goodqualityandhasnotlostits
effectiveness (for example,
throughincorrectstorage, with
theboxleftopen).
If after all the checks, the appli-
ance still does not operate or the
problem persists, call Hotpoint
Service (see KEY CONTACTS,
backpage)andinformthemof:
-thetypeofproblem
- the abbreviation of the model
name(Mod.)andtherelativenum-
bers(S/N)writtenontheratingplate
located on the inner edge of
the door.
Error messages
Yourdishwasherisequippedwitha
safetysystemwhichisabletode-
tectoperatingfaults.
Youwillknowifthereareany faults
ifcodesstartflashingonthedisplay.
Takeanoteofthecodes, turnthe
applianceoffandcallHotpointServ-
icefortechnicalassistance.
Tap off alarm
IftheH2Ocodeisflashing,itmeans
youhaveforgottentoturnthewater
tapon.
Turn the appliance off at the ON-
OFFbutton, turnonthewatertap
andwaitapproximately20seconds
beforeturningtheapplianceback
on. The wash cycle will start up
againafterafewminutes.
If the dishes show signs of
streaking, staining etc.
check...
Switch off at the mains socket
and remove the plug. Turn
off the water supply.
■ Istheinlethosekinked?
■ Isthefilteronthewatersupply
hoseblocked?
■ Isthedishwasherdoornotclosed
properly?
■ therinseaiddispensersettingis
notsettoohigh.
If there are visible traces
of rust inside the tank,
check...
■ thecapoffthesaltcontaineris
securely closed and that the
watersoftnersettingiscorrect.
■ thecorrectamountofdetergent
isbeingused.Certaindetergents
can be more corrosive than
others.
■ the tank is made of steel and
thereforeanyrustmarksaredue
toexternalelements(fragments
ofrustfromthetankpipes,pots,
cutleryetc.)Specialproductsare
commerciallyavailabletoremove
suchmarks.
If water remains inside the
dishwasher, check...
■ thedrainhoseisnotkinked.
■ the drain syphon is not
obstructed.
■ the dishwasher filters are not
clogged.
Clogged filter alarm
Iftheapplianceisblockedandthe
code"A05"isflashing, thismeans
thefilteriscloggedbylargeparticles
offoodresidue. Turnthe knob to
OFF,cleanthefilterthoroughlyand
repositionitinitsseat,thenturnthe
appliancebackon.Thewashcycle
will start up as normal after a few
seconds.
If the dishes are not being
cleaned properly, check...
■ thecorrectamountofdetergent
hasbeenadded.
■ thereisregeneratingsaltinthe
saltcontainer.
■ the dishes have been loaded
correctly.
■ the selected programme is
suitableforthetypeofdishesand
thedegreeofsoiling.
Water load solenoid valve
malfunction alarm
Ifthecode"A02"flashes,TURNthe
dishwasherOFFANDBACKON
AGAINafteroneminute.Ifthealarm
persists, firstturnoffthewatertap
toavoidanyfloodingandthencut
off the electricity supply and call
fortechnicalassistance.
■ allfiltersarecleanandpositioned
correctly.
■ the spray arm nozzles are not
obstructed.
■ thereisnothingobstructingthe
rotationofthesprayarms.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
INFORMATION FOR TEST LABS
Load for 12 Standard Settings tests (upper rack at top position)
Detergent
The Rinse Aid
Detergent specifically intended for use with dishwashers
must be used. The dispenser must be refilled before the
start of each wash cycle following the instructions
provided in the ‘Programme Chart’. The detergent
dispenser is located on the inside panel of the door.
This product makes dishes sparkle more as it improves
their drying. The rinse aid container is situated on the
inside of the door; it should be filled up when the rinse
aid indicator light “T” flashes.
Loading the Rinse Aid
Loading the Detergent
To open the dispenser turn cap C in the anticlockwise
direction and then pour in the rinse aid making sure not to
overfill. The amount of rinse aid used for each cycle can
be regulated by turning the dose adjuster ‘F’ which you
will find under lid ‘C’. There are 6 different settings, the
normal dosage is setting 5.
To open lid ‘A’ press button ‘B’. The cleaning detergent
should be introduced into the three containers ‘1’, ‘2’ and
‘3’ (See table at the end of the page).
After pouring in the detergent, replace the lid, pressing
down until it clicks.
D
B
F
Comp1
Comp2 Comp3
C
Thisbasketisequippedwithtworemovablegrids:insert
thecutleryonebyoneintotheslots, withthehandlesat
the bottom. Position them so that they don't touch.
A
Comp.1
10
Comp.2
25
Comp.3
5
Cycle
Total detergent
30 gr.
EN 50242
IEC/ DIN
See booklet
See booklet
*
*
30 gr.
20
Select the Normal or daily wash cycles (See Programme Chart in the instruction booklet)
*
and press the “extra dry button, if existing
14
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive
parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of
free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales
service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest
white goods repair service in the UK with over 1200 of our own fully trained engineers. All repairs
include a parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on
hand with help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service
cover plans to give you total peace of mind.
l Repair Protection Plan
-
FREE service repairs for a single Hotpoint appliance during the
period of cover.
l Kitchen Cover
-
FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web
site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair
for an engineer to call. If the technical problem is not resolved under this guarantee, we will
replace your machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years (except microwaves, selected integrated appliances and
cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint
engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to
the following provisions that your appliance:
l
Has been installed and used correctly in accordance with this instruction booklet.
Has been used solely for domestic purposes and is located on domestic premises (ie. not
for commercial or trade use).
l
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the
appliance rating plate.
Has not been subject to misuse, accident, modified or repaired by anyone other than one of
our own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right
to use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be
plugged into a mains socket and the door cannot be locked shut.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB.
March 2004
P-195.042175.01
Download from Www.Somanuals.com. All Manuals Search And Download.
|