Hotpoint Cooktop GF941 User Manual

Instructions for Installation and Use  
Hob  
Models GF960, GF941  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Introduction  
4
For Your Safety  
Know your Hob  
How to use your Hob  
Practical Advice  
Care and Cleaning  
Troubleshooting  
Installation  
5
6
7
8-9  
10  
11  
12-14  
Electrical Connection  
15  
Characteristics of Burners and Nozzels  
After Sales Service  
Hotpoint Guarantee  
16  
18  
19  
Key Contacts  
Back Cover  
Retention of this Instruction Book  
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use  
of the appliance.  
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also  
provided so the new owner can become familiar with the appliance and safety warnings.  
If the Book is lost or damaged a copy may be obtained from:  
INDESIT Company UK LTD, Morley Way, Peterborough, PE2 9JB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been  
installed in accordance with the installation instructions detailed in this booklet.  
To help make best use of your cooking equipment, please read this booklet carefully.  
The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.  
* The guarantee is subject to the provisions that the appliance:  
(a) Has been used solely in accordance with this booklet.  
(b) Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the  
appliance.  
(c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the  
manufacturers authorised employee or agent.  
(d) Has been correctly installed.  
This appliance conforms with the following European Economic Community directives:  
-
-
-
-
-
73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;  
89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;  
93/68/EEC of 22/07/93 and subsequent modifications.  
90/396/EEC of 29/06/90 (Gas) and subsequent modifications;  
2002/96/EC  
The European Directive 2002/96/EC onWaste Electrical and Electronic Equipment (WEEE), requires that old household  
electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must  
be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the  
impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of  
your obligation, that when you dispose of the appliance it must be separately collected.  
Consumers should contact their local authority or retailer for information concerning the correct disposal of their old  
appliance.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
When used properly your appliance is completely safe but as with any electrical product there are certain  
precautions that must be observed.  
PLEASE READ THE BELOW PRECAUTIONS BEFORE USING YOUR APPLIANCE.  
To maintain the efficiency and safety of this appliance, we recommend you do the following:  
- only call the Service Centres authorised by the manufacturer.  
- always use genuine spare parts.  
ALWAYS:  
NEVER:  
- make sure you remove all packaging and dispose of safely. - attempt to install or repair the appliance without the  
- check the soundness of the appliance after it has been assistance of qualified personnel.  
unpacked.  
- store items above the appliance that children may attempt  
- make sure you understand the controls before using the to reach.  
appliance.  
- heat up unopened food containers, as pressure can build  
up causing the container to burst.  
- keep children away from the appliance during use.  
- take care to avoid heat/steam burns when operating the - use the appliance to heat up anything other than food.  
controls. - use the appliance as a room heater.  
- make sure the controls are turned off when you have finished - dry any items on the hob.  
cooking and when not in use.  
- install the appliance next to curtains or other soft furnishings.  
- take care to avoid heat/steam burns when operating the - allow children to play with or tamper with the controls.  
controls.  
-leave children unsupervised where cooking appliances are  
- disconnect from the power supply, and allow to cool, before installed as all the cooking surfaces get hot during and after  
cleaning or performing maintenance.  
use.  
- refer servicing to a qualified appliance service engineer.  
- store chemicals, foodstuffs or pressurised containers in or  
- keep the hob clean as a build up of grease or fat from on the appliance, or in cabinets immediately above or next  
cooking can cause a fire. to the appliance.  
- follow the basic principles of food handling and hygiene to - use flammable or plastic items on or near the hob.  
prevent the possibility of bacterial growth. - use adapters, multiple sockets and/or extension leads.  
- dry food thoroughly before frying and lower it slowly into the - fill a deep fat frying pan more than 1/3 full of oil, or use a lid.  
hot oil or fat. Frozen food in particular, will cause frothing and DO NOT LEAVE UNATTENDED WHILE COOKING.  
spitting if added too quickly.  
- keep outside of pans clean and free from streaks of oil or only lowers the temperature or the oil or fat too much, resulting  
fat. in greasy food.  
- fry too much food at a time, especially frozen food. This  
- place pans centrally over the cooking areas making sure - pull on the appliance or the supply able to unplug it from  
handles are kept away from the edge of the hob and cannot the electrical outlet.  
be heated by other heating areas/pans.  
- keep any ventilation slots clear of obstructions.  
- allow power cables of other appliances to come into contact  
with hot parts of this appliance.  
- expose the appliance to atmospheric agents, such as  
rain or sunlight.  
- operate the appliance with wet hands.  
- allow anyone to sit or stand on any part of the appliance.  
- use misshapen pans which may be unstable.  
- use round base woks directly on the gas pan supports.  
- use fish kettles or large preserving pans across two gas  
burners.  
- operate the appliance with wet parts of the body.  
- operate the appliance when barefoot.  
SAFETY ADVICE  
IMPORTANT - As with any cooking appliance there could be some fire risk attached to the heating of oil, particularly for  
deep fat frying. Cooking utensils containing oil must not be left unattended (eg. to answer the telephone) on or in close  
proximity to the cooking areas.  
IN THE EVENT OF A CHIP PAN OR ANY OTHER PAN FIRE:  
1. Turn off the burners.  
2. Cover the pan with a fire blanket or damp cloth, this will smother the flames and extinguish the fire.  
3. Leave the pan to cool for at least 60 minutes before moving it. Injuries are often caused by picking up a hot pan and  
rushing outside with it.  
NEVER USE A FIRE EXTINGUISHER TO PUT OUT A PAN FIRE as the force of the extinguisher is likely to tip the pan  
over. Never use water to extinguish oil or fat fires.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Know your Hob  
S
A
RR  
TC  
B
F
1
12  
2
11  
3
Model GF941V  
Model GF941B  
Model GF960  
4
10  
5
9
6
8
7
D
C
I
H
S
A
RR  
TC  
B
1
6
12  
11  
10  
2
3
4
5
9
8
7
C
L
H
S
A
RR  
TC  
B
SP  
C
B. Pan Support for Cookware  
C. Control Knobs  
D. Ignitor for Gas Burners  
F. Flame Failure Device - Activates if the flame accidentally  
goes out (spills, drafts, etc.), interrupting the delivery of  
gas to the burner.  
A.  
Auxilliary Burner  
RR Reduced Rapid Burner  
S.  
SP. Semi-Fish Kettle Burner  
TC. Triple Crown Burner (Wok Burner)  
Semi Rapid Burner  
H. Indicator for Electric Hotplates - ( models GF941V  
and GF941B only) - On those models equipped with  
electric hotplates and ignitor, the indicator light is  
incorporated into the ignition button.  
I. Glass Ceramic Module - (model GF941V only)  
L. Griddle - (model GF941B only).  
NOTICE  
The cast-iron grill, located in the burner and grate packing box, must be installed, below and above the electric heating  
element so that the element is enclosed between the two.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
How To Use Your Hob  
The position of the corresponding gas burner is indicated on  
each control knob.  
Griddle (model GF941B only)  
Thegriddlecanberegulatedbyturningthecorrespondingknob  
in the clockwise or counter-clockwise direction to any of the 12  
possible settings:  
Gas Burners  
The burners differ in size and power. Choose the most  
appropriate one for the diameter of the cookware being used.  
The burner can be regulated with the corresonding control  
knob by using one of the following settings:  
• Off  
0
1
Off  
Low  
2-11 Medium  
12 High  
When the knob is on any of the settings other than "Off", the  
"H" operating light comes on.  
High  
Low  
Ceramic Glass Module(model GF941V)  
On those models fitted with an ignitor (D),  
To light a burner, simply press the corresponding knob all  
the way in and then turn it in the counter-clockwise direction  
to the "High" setting, keeping it pressed in until the burner  
lights.  
As they are fitted with a flame failure device (F), the  
knob must be pressed in for about 6 seconds until the device  
that keeps the flame lighted warms up.  
Caution: If the burner accidently goes out, turn off the gas  
with the control knob and try to light it again after waiting at  
least 1 minute.  
To turn off a burner, turn the knob in the clockwise direction  
until it stops (it should be on the “•” setting).  
This cooktop is fitted with dual-ring radiant heating elements  
located beneath the glass. It is possible to turn on only the  
circular part of the elemement (identified by the letter "A") or the  
cooking surface can be enlarged by turning on both "A" and  
"B". Toturnonlythecircular"A"element, simplyturntheknobin  
the clockwise direction to any one of the 12 available settings.  
To add the "B" section, turn the knob to setting 12 and then click  
it into the  
setting. Then proceed by turning the knob in the  
counter-clockwise direction to one of the 12 settings.  
The figure shows the heating zones, which become red when  
the element is turned on.  
A. Circular heating zone;  
B. Extended heating zone;  
C. Indicator light to show when the cooking zone is above  
60°C, even after the heating element has been turned off.  
C
A
B
When the knob is on any of the settings other than "Off", the  
"H" operating light comes on.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Practical Advice  
Practical Advice on Using the Half Fish-Kettle Burner  
Practical Advice on Using the Burners  
For best performance, follow these general guidelines:  
The two central burners, or Half Fish-Kettle burners, are eliptic  
in form and can be turned up to 90°. This makes the hob  
more flexible in terms of how it can be used.  
Use the appropriate cookware for each burner (see  
table) in order to prevent the flame from reaching the  
sides of the pot or pan;  
Alwasy use cookware with a flat bottom and keep the  
lid on;  
When the contents come to a boil, turn the knob to  
"Low".  
To turn the two central burners 90°, proceed as follows:  
Burner  
Cookware Diameter  
(cm)  
24 - 26  
24 - 26  
16 - 20  
Make sure that the burners are cool;  
Lift the burner completely out of its housing;  
Replace it in its housing in the position desired;  
Make sure that the burners are positioned correctly before  
use.  
Rapid (R)  
Reduced Rapid (RR)  
Semi-Rapid (S)  
Auxilliary (A)  
10 - 14  
Semi-Fish Kettle (SP)  
Triple Crown (TC)  
16 - 20  
24 - 26  
In addition, the two cetnral burners can be used in tandem  
or speartely with cookware of different shapes and sizes:  
Double burner for a fish-kettle or oval cookware (Fig. A).  
Double burner for a griddle or rectangular/square  
cookware with minimum dimensions of 28x28 cm (Fig. B)  
Double burner for large cookware (diameter of 26-28 cm)  
(Fig. C).  
To identify the type of burner, refer to the 'Burner and Nozzle  
Specifications' section.  
Single burner for medium size cookware (diameter of 16-  
20 cm) (Fig. D).  
Fig. A  
Fig. B  
Fig. C  
Fig. D  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Practical Advice  
Practical Advice on Using the Griddle  
Preheat the griddle by turning the knob to 12. Settings 1-8  
are recommended for reheating food or for keeping it warm  
after it has been cooked. In general, cooking vegetables  
can cause stains which are difficult to remove.  
Weight  
(kg)  
Knob Preheati- Cooking Time  
Food  
Setting ng (min.)  
(min.)  
12  
15  
20  
Pork  
Chops  
0.5  
5
10  
Steak  
0.6  
0.45  
0.4  
12  
10  
12  
10  
11  
5
5
5
5
5
10  
20  
14  
15  
2
Sausages  
Shish Kabobs  
(meat)  
Hamburgers  
0.4  
Toasted  
Sandwiches  
No. 3  
Bread  
3 Slices  
3 Slices  
11  
12  
5
5
3
Aubergines  
5 – 7  
Oven-roasted  
Tomatoes  
No. 4  
12  
5
10 – 15  
Practical Advise on Using the Ceramic Glass Module  
For best performance, keep in mind the following:  
All types of casseroles can be used on the ceramic glass  
cooking surface. However, it is important that the bottom  
be perfectly flat. Casseroles with thicker bottoms distribute  
heat more evenly.  
Set. Radiant Burner  
0
1
Off  
To melt butter and chocolate.  
2
Use cookware the diameter of which is at least as large  
as the cooking area so that all of the heat produced by  
the heating element is used.  
To heat liquids.  
3
4
For creams and sauces.  
For cooking at the boiling point.  
For roasts.  
5
6
Make sure that the bottom of the pot is always dry and  
clean to insure good contact between the cookware and  
the cooking surface. This will also increase the life of the  
pots and of the ceramic glass surface as well.  
Do not use the same cookware that you use for gas  
burners because the concentrated heat they produce can  
deform the bottom of the pot. Therefore, you will not  
achieve best results when using these pots on the  
ceramic glass surface.  
7
8
9
10  
11  
For boiling large pieces of meat.  
12 For frying.  
For utilising both cooking areas.  
Notice: The glue used to seal the glass surface may leave  
traces on the appliance. We recommend that the module be  
cleaned with a non-abrasive cleaner before being used the  
first time. During the first few hours of use, you may detect  
the smell of rubber; this will disappear after a short time.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Cleaning  
Before cleaning or performing maintenance on your hob,  
disconnect it from the power supply.  
To extend the life of the hob, it should be cleaned  
carefully and thoroughly on a frequent basis, keeping in  
mind the following:  
When cleaning the griddle, it is recommeded that you do  
so while it is still hot, using the handles provided to move  
it from the hob to the sink. To remove the pan beneath  
the griddle, it is a good idea to wait until the heating element  
has cooled (roughly after 15 minutes).  
·
Do not use steam equipment to clean the appliance.  
The enamelled parts must be washed with warm water  
without using abrasive powders or corrosive substances  
which could ruin them.  
The removable parts of the burners should be washed  
frequently with warm water and soap, making sure to  
remove caked-on substances.  
On hobs with automatic ignition, the end of the electronic  
ignition device must be cleaned carefully and frequently,  
making sure that the gas holes are not clogged.  
Stainless steel can be stained if it remains in contact  
with highly calcareous water or aggressive detergents  
(containing phosphorous) for an extended period of time.  
It is recommended that these parts be rinsed thoroughly  
with water and then dried well. It is also a good idea to  
clean up any spills.  
Before using the ceramic glass module, the surface should  
be cleaned , using a damp cloth to remove dust or food  
residue. It must be cleaned regularly with a solution of  
warm water and a non-abrasive detergent. First, remove  
all food build up or grease with a cleaning scraper - not  
supplied (Fig.A).  
Greasing theTaps  
The taps may jam in time or they may become difficult to  
turn. If so, the tap itself must be replaced.  
N.B.:This operation must be performed by a technician  
authorised by the manufacturer.  
Clean the cooking surface when it is still warm with a  
suitable cleaning product, rub with a clean damp cloth  
and dry. Sugar or foods with a high sugar content that  
have melted onto the surface must be removed  
immediately with a scraper while the surfacr is still hot. DO  
NOT use abrasive sponges or cleaning products under  
any circumstances. This holds true for chemically  
aggressive cleaners, like oven sprays and stain removers.  
Fig. A  
1 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before calling service for assistance, check through the  
If the burner does not remain on when set to "Low".  
following list, there may be nothing wrong.  
Check to make sure that:  
First of all, check to see that there are no interruptions in the  
gas and electrical supplies, and, in particular, that the gas  
valves for the mains are open.  
The gas holes are not clogged.  
There are no draughts near the cooking surface.  
The minimum has been adjusted correctly (see Installation  
section, "Minimum Regulation").  
If the burner does not light or the flame is not uniform  
around the burner.  
If the cookware is not stable.  
Check to make sure that:  
Check to make sure that:  
The gas holes on the burner are not clogged.  
All of the movable parts that make up the burner are  
mounted correctly.  
The bottom of the cookware is perfectly flat.  
The cookware is centered correctly on the burner .  
The support grids have not been inverted.  
There are no draughts around the cooking surface.  
If, despite all of these checks, the hob does not function  
properly and problem persists, call Hotpoint Service (see  
KEY CONTACTS, back page), informing them of:  
- The type of problem.  
- The abbreviation used to identify the model (Mod. ...) as  
indicated on the warranty.  
If the flame does not stay lit on a model with the  
Flame Failure device.  
Check to make sure that:  
You press the knob all the way in.  
You keep the knob pressed in long enough to activate  
the flame failure device.  
The gas holes are not clogged in the area corresponding  
to the flame failure device.  
IMPORTANT:  
Never call upon technicians not authorized by the  
manufacturer, and refuse to accept spare parts that are not  
original.  
1 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Thefollowinginstructionsareintendedfortheinstallersothatthe  
d) Liquidifiedpetroleumgasesareheavierthanairand,asaresult,  
settle downwards. Rooms in which LPG tanks are installed  
mustbefittedwithventilationopeningstotheoutsideinorderto  
allowthegastoescapeintheeventofaleak. Therefore, LPG  
tanks, whether empty or partially full, must not be installed or  
storedinroomsorspacesbelowgroundlevel(cellars,ect.).Itis  
alsoagoodideatokeeponlythetankcurrentlybeingusedin  
theroom,makingsurethatitisnotnearsourcesofheat(ovens,  
fireplaces,stoves,etc.)thatcouldraisetheinternaltemperature  
of the tank above 50°C.  
installationandmaintenanceproceduresmaybefollowedinthe  
most professional and expert manner possible. Important:  
Disconnect the appliance from the electrical supply before  
performinganymaintenanceorrepair.  
PositioningtheHob  
Important: this unit may be installed and used only in  
permanently ventilated rooms in accordance with British  
Standard Codes Of Practice:B.S. 6172 / B.S. 5440, Par. 2 and  
B.S.6891 Current Editions.The following requirements must be  
observed:  
Installation of built-in hobs  
a) Theroommustbefittedwithaventilationsystemwhichvents  
smokeandgasesfromcombustiontotheoutside.Thismust  
be done by means of a hood or electric ventilator that turns  
onautomaticallyeachtimethehobisoperated.  
The gas hobs are prepared with protection degree against  
excessive heating of type X, the appliance can therefore be  
installed next to cabinets, provided the height does not  
exceed that of the hob. For a correct installation of the cooking  
hob the following precautions must be followed:  
a) The hob may be located in a kitchen, a kitchen/diner or  
bed sitting room, but not in a bathroom or shower room.  
b) The furniture standing next to the unit, that is higher than  
the working boards, must be placed at least 110mm from  
the edge of the board.  
c) The cabinets should be positioned next to the hood at a  
height of at least 420 mm (Fig. C).  
HOOD  
Min. 900mm.  
In a chimney stack or branched flue.  
(exclusively for cooking appliances)  
Directly to the Outside  
b) Theroommusthaveanairflowtoallowforpropercombustion.  
3
Thismustbe2m ³/hperkWofinstalledpower.Theairflowcan  
becreatedusinganenclosedventwithaninnercrosssection  
ofatleast100cm²whichmustnotbeabletobeblocked. Ithe  
appliancedoesnothaveaflamefailuredevice, theventmust  
Fig. C  
d) Should the hob be installed directly under a cupboard,  
the letter should be at least 700mm (millimetres) from the  
worktop, as shown in Fig. C.  
e) The dimensions of the room for the furniture must be those  
indicated in the figures in the last two pages of the cover.  
Fixing hooks are provided which allow to place the hob  
plate on work tops that measure from 20 to 40 mm in  
thickness (see Fig. D). To obtain a good fixing of the hob  
plate it is advisable to use all the hooks supplied.  
3
haveaninternalcrosssectionof200cm ³(Fig.A). Alternatively  
theroominwhichthehobissituatedcanbeventedindirectly  
through ventilation ducts as specified above, as long as the  
adjacentroomisnotasharedarea, abedroomorpresentany  
riskoffire(Fig.B).  
Detail A  
Adjacent  
Room  
Room to be  
Vented  
Fig. D  
min. 55 mm.  
A
Examples of ventilation holes  
for comburant air.  
Enlarging the ventilation slot  
between window and floor.  
835 mm.  
Fig.A  
Fig.B  
c) Intensiveandprolongeduseoftheappliancemaynecessitate  
supplementalventilation, e.g. openingawindoworincreasing  
thepoweroftheairintakesystem(ifpresent).  
Fig. D  
1 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Gas connection for gas hob  
The hob should be connected to the gas-supply by a corgi  
registered installer. During installation of this product it is  
essential to fit an approved gas tap to isolate the supply  
from the appliance for the convenience of any subsequent  
removal or servicing. Connection of the appliance to the gas  
mains or liquid gas must be carried out according to the  
prescribed regulation in force, and only after it is ascertained  
that it is adaptable to the type of gas to be used. If not,  
follow the instructions indicated in the paragraph headed  
“Adaptation to different gas types”. In the case of connection  
to liquid gas, by tank, use pressure regulators that conform  
to the regulation in force.  
Hook position for  
H=30mm top  
Hook position for  
H=40mm top  
Front  
Important: For safety, for the correct regulation of gas use  
and long life of the appliance, ensure that the gas pressure  
conforms to the indications given in table 1 “Nozzle and burner  
characteristics”.  
Hook position for  
Back  
H=20mm top  
Connection to non-flexible tube  
(copper or steel)  
N.B: Use the hook contained in the "accessoires set"  
f) In the event the hob is not installed above a built-in oven,  
a wood panel must be inserted as insulation. This panel  
must be placed at least 20 mm from the bottom of the  
hob itself.  
Important: When installing the hob above a built-in oven,  
the oven should be placed on two wooden strips; in the  
case of a joining cabinet surface, remember to leave a space  
of at least 45 x 560 mm at the back.  
Connection to the gas source must be done in such a way  
as to not create any stress points at any part of the  
appliance.  
The appliance is fitted with an adjustable, "L" shaped connector  
and a gasket for the attachment to the gas supply. Should this  
connector have to be turned, the gasket must be replaced  
(supplied with the appliance).  
The feeding connector of the gas to the appliance is threaded  
1/2 gas male cylinder.  
Connection to flexible steel tube  
The gas feed connector to the appliance is a threaded, male  
1/2" connector for round gas pipe. Only use pipes and sealing  
gaskets that that conform to the standards currently in force.  
The maximum length of the flexible pipes must not exceed  
2000 mm. Once the connection has been made, ensure  
that the flexible metal tube does not touch any moving parts  
and is not crushed.  
560 mm.  
Check the Seal  
When installing on a built-in oven without forced ventilation,  
ensure that there are air inlets and outlets for ventilating the  
interior of the cabinet adequately.  
Once the hob has been installed, make sure all the  
connections are properly sealed, using a soapy water  
solution. Never use a flame.  
1 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Adapting the Hob for Different Types of Gas  
Regulation of Air Supply to the Burner  
To adapt the hob to a different type of gas than that for  
which it was designed, (see the sticker under the hob or on  
the packaging), the burner nozzles must be changed, as  
follows:  
The burners do not need any primary air regulator.  
Minimum Regulation  
Minimum regulation:  
Turn the gas valve to minimum.  
Remove the pan supports and slide the burners out of  
Remove the knob and turn the regulator screw (positioned  
either on the side of the top or inside the shaft - Figs. A  
and B) clockwise until the flame becomes small but  
regular.  
the hob.  
Unscrew the nozzles using a 7mm socket wrench and  
replace them with those for the new type of gas. (See  
table 1, “Burner and Nozzle Specifications”).  
N.B.: In the case of liquid gas, the regulation screw must be  
fully screwed in (clockwise).  
Reassemble the parts following the instructions in reverse  
order.  
On completing the operation, replace the old rating label  
with the one showing the new type of gas; the sticker is  
available from Hotpoint Service (see KEY CONTACTS,  
back page).  
If the gas pressure is different than that prescribed, a  
pressure regulator must be installed at the source, in  
compliance with national standards governing the use of  
piped gas regulators.  
Make sure that, when the knob is turned rapidly high to  
low, the flame does not go out.  
In the event of a malfunction on appliances with the  
security device (thermocouple) when the gas supply is  
set at minimum, increase the minimum supply levels using  
the regulator screw in Fig. A - B.  
Once the adjustment has been made, apply sealing wax,  
or a suitable substitute, to the old seals on the by-pass.  
1 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical Connection  
Before connecting to the power supply, make sure that:  
Electrical connection  
• the limiter switch and the domestic system can  
withstand the load from the appliance (see rating  
plate).  
• the supply system is efficiently earthed according to  
standards and laws in force.  
WARNING: THIS APPLIANCE MUST BE EARTHED.  
The hob is designed to work with alternating current, the  
supply voltage and frequency indicated on the rating plate  
(situated under the hob). Make sure that the local supply  
voltage corresponds to the voltage indicated on the rating  
plate.  
• the socket or double-pole switch are easily accessible  
when the appliance is installed.  
Connecting the supply cable to the mains electricity  
supply  
Important: the wires in the mains lead are coloured in  
accordance with the following code:  
For models supplied without a plug, fit a standard plug  
suitable for the load indicated on the rating plate, onto a  
cable and connect to a suitable socket.  
Green & Yellow  
Blue  
Brown  
- Earth  
- Neutral  
- Live  
To connect direct to the mains supply, a double pole switch  
with a contact separation of at least 3mm suitable for the  
load and complying with current standards and regulations  
must be fitted between the appliance and the mains supply  
outlet.  
As the colours of the wires in the mains lead may not  
correspond with the coloured markings identifying the terminals  
in your plug, proceed as follows:  
Connect the Green & Yellow wire to terminal marked “E”  
or  
or coloured Green or Green & Yellow.  
The green-yellow earth wire must not be interrupted by the  
switch.  
Connect the Brown wire to the terminal marked “L” or coloured  
Red or Brown.  
The supply cable must be positioned so that no part of it  
reaches a temperature of 50°C above room temperature.  
For installation above a built-under oven, the hob and the  
oven must be connected separately to the electricity supply,  
both for safetly reasons and for easy removal of the oven  
for repair, maintenance etc.  
Connect the Blue wire to the terminal marked “N” or coloured  
Black or Blue.  
FAILURE TO OBSERVE THE ACCIDENT-  
PREVENTION REGULATIONS RELIEVES THE  
MANUFACTURER OF ALL LIABILITY.  
DO NOT use adapters as they could cause overheating or  
burning.  
Replacing the cable  
Use a rubber cable of the type H05RR-F with a suitable  
cross section 3 x 0.75 mm².  
The yellow-green earth wire must be 2-3 cm longer than  
the other wires.  
1 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Characteristic of the burners and nozzles  
Table 1  
Liquid gas  
Natural gas  
Burner  
Diameter Thermal power  
By-pass  
1/100  
Nozzle  
1/100  
Flow*  
g/h  
Nozzler Flow*  
(mm)  
kW (p.c.s.*)  
1/100  
l/h  
(mm)  
Nom. Red.  
(1)  
(mm)  
86  
***  
**  
(mm)  
116  
Rapid  
(Large) (R)  
100  
100  
75  
3.00  
2.60  
1.65  
0.7  
0.7  
0.4  
41  
41  
30  
39  
39  
28  
218  
214  
286  
248  
157  
Reduced  
Rapid (RR)  
80  
64  
189  
120  
186  
118  
110  
96  
Semi Rapid  
(Medium) (S)  
Auxiliary  
(Small) (A)  
55  
130  
-
1.00  
3.25  
1.50  
0.4  
1.3  
0.7  
30  
60  
41  
28  
57  
39  
50  
91  
60  
73  
71  
71  
133  
88  
95  
Triple Crown (TC)  
236  
109  
232  
107  
309  
143  
Semi-Fish Kettle  
Burner (SP)  
Nominal (mbar)  
Minimum (mbar)  
Maximum (mbar)  
28-30  
20  
35  
37  
25  
45  
20  
17  
25  
Supply pressures  
*
**  
At 15°C and 1013 mbar-dry gas  
*** Butane  
Naturale  
P.C.S. = 49,47 MJ/kg  
P.C.S. = 37,78 MJ/m3  
Propane  
P.C.S. = 50,37 MJ/kg  
(1) for models with security device (ref. F).  
1 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
1 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
"No company is better positioned to offer an after sales service on a  
Hotpoint appliance than us - the manufacturer"  
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts  
and labour guarantee for the first 12 months. In addition to this you also have the advantage of free  
replacement parts for the first 5 years when fitted by a Hotpoint  
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales  
service options:  
Repair Service and Information Help Desk  
UK: 08709 066066  
Republic of Ireland: 1850 302 200  
Note: Our operators will require the Model number and the Serial number of your appliance  
Available 364 days a year with a fast, effective and value for money service. We have the largest white  
goods repair service in the UK with over 1200 of our own fully trained engineers. All repairs include a parts  
and labour guarantee for 12 months from the date of the repair.  
If you require any information or have any questions about your appliance, our operators are on hand with  
help and advice.  
All this ensures that you will receive the best available after sales service possible.  
Extended Warranties  
UK: 08709 088 088  
Republic of Ireland: 1850 502 200  
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover  
plans to give you total peace of mind.  
l Repair Protection Plan  
-
FREE service repairs for a single Hotpoint appliance during the period  
of cover.  
l Kitchen Cover  
-
FREE service repairs for all your Hotpoint appliances less than 8  
years old.  
Genuine Parts and AccessoriesUK: 08709 077 077  
Republic of Ireland: (01) 842 6836  
A wide range of genuine parts and accessories are available from our hotline or through our web site.  
Genuine parts and accessories, extended warranties and service repairs are all  
available on our web-site at:  
GB  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee  
"Satisfaction guaranteed or your money back"  
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have  
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or  
engineer to call. If the technical problem is not resolved under this guarantee, we will replace your  
machine or, if you prefer, give you your money back.  
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free  
replacement parts for the first 5 years (except microwaves, selected integrated appliances and cooker  
hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer.  
Guarantee terms and conditions  
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the  
following provisions that your appliance:  
l
l
Has been installed and used correctly in accordance with this instruction booklet.  
Has been used solely for domestic purposes and is located on domestic premises (ie. not for  
commercial or trade use).  
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the appliance  
rating plate.  
Has not been subject to misuse, accident, modified or repaired by anyone other than one of our  
own service engineers.  
For pre purchase information on any other Hotpoint product call: 08701 50 60 70  
Recycling & Disposal Information  
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to  
use quality recycled components to keep down customer costs and minimise material wastage.  
Please dispose of packaging and old appliances carefully.  
To minimise risk of injury to children, remove the plug and cut mains cable off flush with the appliance.  
Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains  
socket.  
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Contacts  
After Sales Service  
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in  
both the appliances and services we offer.  
Repair Service and Information Desk  
UK: 08709 066 066  
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)  
Republic of Ireland: 1850 302 200  
Note: Our operators will require the following information:  
Model number:  
Serial number:  
Extended Warranties  
UK: 08709 088 088  
(Open 8 to 8 Mon - Sun)  
Republic of Ireland: 1850 502 200  
Genuine Parts and Accessories  
UK: 08709 077 077  
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)  
Republic of Ireland: (01) 842 6836  
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB.  
195.036.405.03  
10/2005 Part no. FP163 - 01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Drill H6331 User Manual
Grizzly Grinder H4379 User Manual
Hamilton Beach Fryer 35015 User Manual
Harbor Freight Tools Drill 68169 User Manual
Harman Kardon Stereo Receiver AVR 165 User Manual
HP Hewlett Packard Calculator HP OmniBook User Manual
HP Hewlett Packard Personal Computer d530 Series User Manual
Humax Cable Box VA 5200 User Manual
Husqvarna Chainsaw 334T User Manual
iHome Stereo System iP99 User Manual