Hawking Technology Switch CS152F User Manual

CS152F  
2-Port KVM Switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The complete CS152F package consists of:  
One 2-Port CS152F KVM Switch  
Two Premium Quality KVM Cables  
One User’s Manual  
Check to make sure that the unit was not damaged during shipping. If you encounter a  
problem, contact your dealer.  
Please read this manual thoroughly, and follow the installation and operation procedures  
carefully to prevent any damage to the CS152F unit, and/or any of the devices connected  
to it.  
Copyright 2003 Hawking Technologies, Inc.  
All brand names and trademarks are the registered property of their respective owners.  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview…………………………………………………………………………………..3  
Features……………………………………………………………………………………4  
Hardware Requirements …………………………………………………………………..5  
Console………………………………………………………………………………….5  
PC……………………………………………………………………………………….5  
Cables…………………………………………………………………………………...5  
Introduction………………………………………………………………………………..6  
Front View……………………………………………………………………………...6  
Side View…………………………………………………………………………….6-7  
Console View…………………………………………………………………………...7  
Installation…………………………………………………………………………………8  
Operation…………………………………………………………………………………..9  
Port Selection………………………………………………………………………….9  
Manual Navigation……………………………………………………………….…....9  
HotKey Navigation……………………………………………………………..……... 9  
Auto Scan Mode………………………………………………………………………10  
Appendix…………………………………………………………………………………11  
LED Status………………………………………………………………………….....11  
Troubleshooting……………………………………………………………………11-12  
Specifications………………………………………………………………………….13  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The CS152F 2-Port KVM Switch is a control unit that allows access to multiple  
computers from a single console (keyboard, monitor and mouse). Before the  
development of the CS152F, the only way to control multiple computer configurations  
from a single console was through a complex and costly network system. Now, with the  
CS152F, you can easily access multiple computers in a cost effective manner.  
The CS152F unit can control up to 2 PCs, all from a single console.  
Setup is fast and easy; all that is required is for the user to plug the cables into the  
appropriate ports. There is no software to configure, so there is no need to get involved  
in complex installation routines or to be concerned with incompatibility problems. Since  
the CS152F intercepts keyboard input directly, it works on any hardware platform and  
with all operating systems.  
The CS152F provides two convenient methods to access any PC connected to the system:  
(1) using the push button port selection switch located on top of the unit's panel; (2)  
entering Hotkey combinations from the keyboard. In addition, a powerful Quick View  
Scan feature allows you to auto scan and monitor the activities of all operating PCs on the  
installation one by one.  
There is no better way to save time and money. By allowing a single console to manage  
all the attached PCs, the CS152F eliminates the expense of purchasing a separate  
keyboard, monitor, and mouse for each PC, and saves all the extra space as well. It also  
eliminates the inconvenience and unnecessary effort involved in constantly moving  
around from one PC to another.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Up to 2 PCs From a Single Console  
No Software Required - PC Selection via “Select” button on the Switch, HotKey  
combinations  
Quick View Scan Feature for Monitoring Selected PCs  
PS/2 and Serial Mouse Emulation Provided For System Bootup  
Console's PS/2 Mouse Controls All Connected PCs  
PS/2 Compatible Mouse Support - Microsoft Intellimouse Pro, Logitech FirstMouse,  
FirstMouse+, Support*  
SVGA, VGA and Multisync Monitor Support  
Superior Video Quality; 1920 x 1440  
LED Display For Easy Status Monitoring  
Includes 2 High Quality KVM Connector Cables  
Hot Pluggable - Add or Remove PCs for Maintenance Without Powering Down the  
Switch  
*1. PS/2 compatible mouse support is for three button (wheel) mice.  
2. The Logitech Mouse Ware program’s Change Device procedure does not work on  
Microsoft NT systems.  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Console  
A VGA, SVGA, or Multisync monitor with the highest resolution that you will be  
using on any PC in the installation  
A PS/2 Style Mouse  
A PS/2 Style Keyboard  
PC  
The following equipment must be installed on each PC that is to be connected to the  
system:  
A VGA, SVGA or Multisync card.  
Either a 6-pin mini-DIN (PS/2 style), or DB-9 (standard serial) mouse port.  
Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and ground  
on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground  
on pin 4.*  
* See the note under Cables in the next section.  
Cables  
Although it is possible to use generic extension cables to connect the PCs to the CS152F,  
for optimum signal integrity and to simplify the layout, we strongly recommend that you  
use the high quality KVM Cables included with your 2-Port KVM Switch.  
Note:  
1. If your PC uses a standard AT style keyboard socket you will need to purchase  
a PS/2-to-AT keyboard adapter in order to plug the cable into the computer's  
keyboard port.  
2. If your PC uses a standard 9-pin serial port for the mouse, you will need to  
purchase a PS/2-to-Serial mouse adapter in order to plug the cable into the  
computer's serial port.  
3. Because of the wiring and pin assignments, you cannot use a Serial-to-PS/2  
adapter at the end that plugs into the CS152F. Therefore, attempting to use a  
standard serial extender cable with adapters at both ends will fail.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT VIEW:  
1. Port LEDs:  
Pressing the “Select” button switches access back and forth between  
the PCs. The selected LED lights indicate which port is the active one.  
2. Sounds:  
The switch will beep when switching ports.  
SWITCH SIDE VIEW  
Video  
Keyboard Mouse  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCH SIDE VIEW  
Mouse  
Keyboard  
Video  
VIDEO CONSOLE  
Console Video (To monitor)  
CONSOLE – MOUSE / KEYBOARD / POWER  
Console Keyboard  
Console Mouse  
DC 9V 500mA Max (not necessary)  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you begin, please make sure that all of the devices that you are going to connect to  
have power turned off.  
Installation  
To set up your CS152F, please follow the steps below:  
1. Plug the cables from your keyboard, mouse and monitor into the Console Ports.  
2. Use the supplied connector cable sets (as described in the Hardware Requirements  
section) to connect the monitor, keyboard and mouse ports of the PCs to the CS152F  
2-port KVM Switch.  
3. The CS152F does not require external power. If you choose to use external power,  
plug the power adapter into an AC power source, then plug the cable into the CS152F  
Power Jack.  
Note:Use of a DC power adapter is optional, and requires a separate purchase.  
4. Turn on the power of the PCs.  
Installation Diagram  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Port Selection  
Controlling all the PCs connected to your CS152F from a single console couldn’t be  
easier. You can access any PC on the chain using two methods: Manual or HotKey.  
Manual  
Simply press the “Select” button located on top of the CS152F to switch back and  
forth between computers. The selected LED lights indicate the port that is currently in  
use.  
HotKey Navigation  
HotKey navigation allows you to conveniently access connected PCs directly from the  
keyboard, instead of having to manually select by pressing the “Select” button on the  
CS152F switch. To select a port with the HotKey method, do the following:  
1. Press and release the [Scroll Lock] key twice within 2 seconds and press:  
a) “Up-Arrow” to select the previous channel,  
b) “Down Arrow” to select the next channel,  
c) [S] key to set the KVM switch into Auto Scan Mode.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Scan Mode  
The CS152F Auto Scan feature automatically switches between the two PCs at regular  
4 second intervals so that you can monitor their activity without having to take the  
trouble of switching yourself. To invoke the Auto Scan Mode, key in the following  
HotKey combination:  
[Scroll Lock] + [Scroll Lock] + [S]  
Reminder: Press and release the [Scroll Lock] key twice within 2 seconds.  
Once scanning begins, it continues until you press any other key to exit Auto Scan  
Mode. The port that was currently active at the time when scanning stopped remains  
active.  
Last/Next Mode  
The Last/Next feature is provided to enable you to quickly switch back and forth  
between computers in order to monitor them manually, instead of using Auto Scan  
Mode. This method lets you dwell on a particular port for as long or as little as you  
like – as opposed to Auto Scan Mode, which switches after a fixed interval.  
1. Press [Scroll Lock] + [Scroll Lock] + “Up Arrow”  
2. Press [Scroll Lock] + [Scroll Lock] + “Down Arrow”  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activity  
Meaning  
Off  
On (Steady)  
Flashing (On and Off Port is connected to an active PC and is being accessed  
Port is not selected  
Port is connected to an active PC  
equal)  
in Auto Scan mode.  
Troubleshooting  
Note: If you are experiencing difficulties, first make sure that there are no problems with  
the cables, and that they are all properly connected.  
Symptom  
Erratic  
Behavior  
Possible Cause  
Action  
Unit not receiving  
enough power under supplied with the unit to provide  
Use the Power Adapter that was  
self-powered  
operation.  
external power.  
Unplug the Keyboard from the Console  
Keyboard Port, then plug it back in.  
Keyboard Not Keyboard needs to  
Responding* be reset  
Turn off the PCs and wait for five  
seconds. Turn them back on.  
CS152F needs to be  
reset  
CS152F is in Auto  
Scan Mode or  
Press the [Spacebar] to exit Auto Scan  
or Last/Next Mode.  
Last/Next Mode  
Unplug the Mouse from the Console  
Mouse Port, then plug it back in.  
Mouse Not  
Responding** reset  
Mouse needs to be  
Turn off the PCs and wait for five  
seconds. Turn them back on.  
CS152F needs to be  
reset  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mouse in  
unsupported mode  
The CS152F supports most mice  
with PS/2, including Microsoft  
Intellimouse, Logitech Net Mouse,  
etc.  
If the problem persists, change the  
mouse and/or mouse driver. Try a  
regular mouse with a generic mouse  
driver (like the ones that come with  
the operating system).  
Select a lower resolution and/or  
bandwidth  
Video  
Problems  
Resolution and/or  
Bandwidth set too  
high  
We strongly recommend that you use  
the premium KVM cables included  
with your CS152F. Using high  
quality cables should eliminate  
possible video problems.  
Poor cable quality  
*The 2-Port KVM Switch is designed to work with PS/2 keyboards. Older XT (84-key)  
and some older AT keyboards (those with the function keys on the side), will not work.  
**Some Notebook computers, notably the IBM Thinkpad and Toshiba Tecra, have  
trouble working with the CS152F when their mice and keyboard  
ports are used simultaneously. To avoid this problem, only connect the mouse port or  
the keyboard port to the CS152F unit. If you connect the mouse port, you will need to  
use the notebook’s keyboard when you switch to make the notebook the active  
computer.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Function  
Specifications  
Computer Connections  
Port Selection  
LEDs  
2
Push Button, Hot Keys  
2-Port Status  
1 x 6-pin mini-DIN female (PS/2 style) – Console  
2 x 6-pin mini-DIN female (PS/2 style) – PC Ports  
1 x 6-pin mini-DIN female (PS/2 style) - Console  
2 x 6-pin mini-DIN female (PS/2 style) – PC Ports  
1 x HDB – 15-pin HDB Type Female – Console  
2 x HDB – 15-pin HDB Type Female - PC Ports  
Connectors  
Keyboard  
Mouse  
Video  
VGA Max Resolution  
Auto Scan Interval  
Operating System  
Power Consumption  
Operating Temperature  
Storage Temperature  
Humidity  
Up to 1920 x 1440  
4 seconds  
DOS, Win 3.X, Win95/98/2000/ME  
DC 9V 500mA (max.)  
5 ~ 40o C  
-20 ~ 60o C  
0 ~ 80% RH, Noncondensing  
Plastic  
Housing  
Weight  
5 oz (140 grams)  
Dimensions (L x W x H)  
4.33”x 2.95” x 1.22” (110 x 75 x 31 mm)  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Water Dispenser Model 214623 User Manual
Grizzly Automobile Parts H8097 User Manual
Hans Grohe Indoor Furnishings 35002801 User Manual
Harbor Freight Tools Fan 36711 User Manual
Harman Stove Company Electric Heater TL20 User Manual
Honeywell Home Security System MIP 2 User Manual
Honeywell Thermostat CT8602 User Manual
Humminbird GPS Receiver 531478 2_B User Manual
Husqvarna Lawn Mower YTH2548XP User Manual
Husqvarna Plumbing Product D404558 User Manual