INSTALL INSTRUCTIONS C-TCB-MAK
MONITOR ADAPTER KIT
FOR USE ON ALL STRAIGHT POLED C-TCB’S
TOOLS REQUIRED:
Ratcheting wrench
T-20 torx bit
Sockets - 7/16”, ½”
3/16” Allen key
Combination wrenches - 7/16”, ½”
HARDWARE:
ITEM #
QTY
DESCRIPTION
PART #
1
2
3
4
5
6
7
8
1
1
1
1
2
2
1
1
Rotating TCB plate
Bolt/nut weldment
5/16-24 Flex nut
5/16-24 x 1” Socket head cap screw
5/16” Belleville stainless washer
5/16” x 2” Fender washer
5/16-24 Hex jam nut
CM93073-2
CM001491
CM86209
CM86502
GSM31092
GSM31020
GSM30070
GSM30017
5/16-18 nylock nut
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
#5, 8
#1
#3, 4, 5, 6, 7
#2
Straight inner
pole assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|