Two Sided Mobile Cart
Without Bins
93578
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright © 2005 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Use the right tool for the job. Do not attempt to force a small item to do the
work of a larger industrial item. Do not modify this item and do not use this
item for a purpose for which it was not intended.
6. Do not overreach. Keep proper footing and balance at all times. Do not stand
on this Mobile Cart.When unattended, be sure it will not accidently roll away.
7. Maintain Mobile Cart with care. Follow instructions for maintenance.The
Mobile Cart must be kept clean, dry, and free from oil and grease at all times.
8. Stay alert. Watch what you are doing, use common sense. Do not operate
any item when you are tired.
9. Do not wear loose clothing. Do not allow loose clothing, hair or hands to get
caught in the moving parts of this mobile cart.
10. Check for damaged parts. Before using any item, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician.
11. Replacement parts and accessories. When servicing, use only identical
replacement parts.
12. Use eye and ear protection. Always wear ANSI-approved impact safety
goggles when assembling this item.
13. Do not operate item if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the item.
14. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Warning:The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are fac-
tors which cannot be built into this product, but must be supplied by the opera-
tor.
SKU 93578
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
You will need small hand tools (screwdriver, pliers) to complete assembly of this
item.(Tools are not included.)These tools may be obtained from Harbor Freight
Tools.
WARNING: Be careful not to pinch your fingers as you proceed with assembly.
Please refer to the Assembly Diagram on page 6 as you work.
1. STEP 1: Assemble the Handles (B) to the Frame (A) using Bolts (H1).
2. Assemble Left and Right Gussets (C and D) to the Frame A using fasteners
(H2, H3, H4, and H5).Tighten all fasteners firmly.
3. STEP 2: Attach Louver Rack (E) to the prior assembly using fasteners (H6
and H7).Tighten securely.
4. STEP 3: Assemble the Casters (G) to the Caster Base (F) using fasteners
(H8, H9, H10, and H11).Tighten securely.
5. STEP 4: Attach the unit completed in STEP 2 to the Caster Base assembly
using fasteners (H2, H3, H4 and H5).Tighten firmly.
Warning: Be aware of a possible tipping hazard; always store heavier items
towards the base, and keep weight evenly distributed in the bins.
Optional Bins
Optional bins to fit this rack may be purchased from Harbor Freight tools.
Please refer to the photo on page 5 for a suggested configuration.
SKU 93578
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
1. Do not overload the Bin Cart. Be
aware that a few pounds in each of
many optional bins may add up to a
large weight.The max.weight rating
of this cart is 500 lbs.
2. Regularly check the many fasteners
holding this cart together to ensure
that they are correctly in place and
firmly tight.Tighten or replace as
necessary.
3. Protect the bin cart from excessive
exposure to direct sunlight, rain,
freezing and other weather.Store
the bin cart in a dry, protected place
when not in use.
4. Keep the bin cart clean, free from
dirt, oil and corrosive materials.
Protect it from wet conditions which
may cause rust.
Bin Cart shown with
optional bins in place.
Parts List
COMPONENTS
HARDWARE
Part Description
QTY.
Part Description
QTY.
Part Description
Qty.
27
A
B
C
D
E
F
Frame
1
2
2
2
2
1
4
H1 Bolt m4x9
4
H7
H8
Self-tapping Screw
Handle
H2
H3
H4
H5
H6
Nut m6
12
12
12
12
27
Screw m6x15
16
Left Gusset Plate
Right Gusset Plate
Louver Rack
Caster Base
3" Casters
Spring Washer m6
Flat Washer m6
Bolt m6x16
H9
Flat Washer m6
Spring Washer m6
16
H10
16
H11 Nut m6
16
Spring Clip
G
NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts.
REV 04/06
SKU 93578
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Diagram
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATESTHAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER AS-
SUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRSTOTHE ORIGI-
NAL PRODUCT OR REPLACEMENT PARTSTHERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTSTHERETO.
SKU 93578
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
|