12’’ ELECTRIC LAWN MOWER
47336
Assembly, And OperAtiOn instructiOns
distributed exclusively by Harbor Freight tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
read this material before using this product.
Failure to do so can result in serious injury.
sAVe tHis mAnuAl.
Copyright© 2002 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 08d
Download from Www.Somanuals.com. All Manuals Search And Download.
are recommended when working. Wear restrictive hair covering to contain long hair.
When using the Electric Lawnmover always wear shoes with enclosed toes. Never
use while barefoot or while wearing open toed shoes.
7.
8.
9.
Use eye and ear protection. Always wear ANSI approved impact safety goggles and
ear protection.
Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect tool
cords periodically and, if damaged, have them repaired by an authorized technician.
The handles must be kept clean, dry, and free from oil and grease at all times.
10. Disconnect power. Unplug tool when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before plugging it in.
12. Avoid unintentional starting. Be sure the switch is in the Off position when not in
use and before plugging in. Do not attempt to lift or move this product with your finger
on the trigger, whether it is plugged in or not.
13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
14. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not turn On and Off properly.
15. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
16. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
17. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
18. Use proper size and type extension cord. The extension cord must be of the proper
size and type to supply the correct current to the tool without heating up. Otherwise,
the extension cord could melt and catch fire, or cause electrical damage to the tool.
This tool requires use of an extension cord of 0 to 10 amps capability (up to 50 feet),
with wire size rated at 16 AWG. Longer extension cords require larger size wire. If you
are using the tool outdoors, use an extension cord rated for outdoor use. (signified by
“WA” on the jacket).
SKU 47336
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
19. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
20. Pacemaker safety warning. People with pacemakers should consult with their
physician(s) before using this product; operation of equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.
Note: Performance of this tool may vary depending on variations in local line voltage. Exten-
sion cord usage may also affect tool performance.
Warning:The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
Additional Lawnmower Safety Precautions
1.
2.
3.
The lawnmower should only be used for cutting grass. Never atempt to use the
lawnmover to cut thick weed patches or plants. (i.e. ice place, ivy, etc.)
Before mowing the grass, remove all obstacles from the grass that could cause
damage to the mower, or personal injury if thrown.
Before plugging in the line cord, use a wrench and check the cutting blade for
tightness.
4.
5.
Always mow across slopes, not up and down them.
Never tilt the lawnmower, or run it over surfaces other than grass when the motor is
running.
6.
Unplug the line cord and wait for the blade to stop turning before emptying the grass
basket, carrying the mower, changing blades, clearing blockages, or when finished
mowing. Caution: Always unplug the electricl cord before making any adjustments to
the mower.
7.
Be aware of the location of the extension cord at all times when mowing. If you cut the
extension cord with the mower, unplug the extension cord from the electrical outlet
immediately.
8.
9.
Never use the mower in the rain, or in wet conditions.
Never turn on the mower while it is lying on its side.
10. Unplug the Power Cord before lying the Lawnmower on its side.
Unpacking
When unpacking, check to make sure the following parts are included. Refer to the photo at
the top of page 5. If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual as soon as possible.
SKU 47336
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Clamps (39)
and Cord Clamp (9)
not shown
Screws (35)
Lower Handle (31B)
Upper Handle (37)
Knob (34)
Screws (35)
Lower Handle (31A)
Cutter Housing (13)
Grass Basket (19)
and Screws (20)
Screws (23)
Assembly
1.
Insert the Lower Handle (31B) into the hole on the right side of the Cutter Housing
(13), and the Lower Handle (31A) into the hole on the left side. Tighten both Screws
(23) that hold the Lower Handles in place. See photo above.
2.
3.
Attach the Upper Handle (37) to the Lower Handles (31 A and B) using Knob (34) and
Screw (35). Tighten both Knobs securely.
To attach the Grass Basket (19), lift the Discharge Cover (30) and place the two “L”
Bars on the Grass Basket (19) over the tabs on the Cutter Housing (13). Then, release
the Discharge Cover (30). See photos above and below.
Discharge Cover (30)
L Bars
Tabs
Operation
Set Cutting Height
Caution: Always disconnect the power cord from the lawnmower before making adjust-
ments.
SKU 47336
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
3.
Unplug the power cord.
Set the lawnmower on its side.
Using both hands, pull out the spring loaded front and rear axles to the desired height.
The higher the wheel, the shorter the cut.
Connecting the Power Cord
1.
2.
3.
Attach an outdoor rated, 10 amp extension cord (not supplied) to the lawnmower
Power Cord (40).
Secure the extension cord and Power Cord to the Cable Clamps (39) and Cord Clamp
(9). This practice keeps both cords from lying around the Cutter Housing.
Connect the extension cord to an electrical outlet.
Turning on the Lawnmower
Caution: Before operating the Lawnmower, make sure that the grass to be cut is free
from rocks, water hoses, sticks and other items that could damage the Lawnmower or
cause personal injury if thrown towards the user.
1.
Move the Lawnmower onto the grass to be cut. Make sure the extension cord is
behind you as you travel forward cutting the grass.
Warning: Running over and cutting the extension cord will create an electrocution
hazard. Caution: Always unplug the electrical cord before making any adjustments to
the mower.
2.
With your left hand, press and hold in the Pushbutton (44).
3.
Squeeze and hold the Switch Handle (41).
The motor will start. Wait until the motor reaches full speed before proceeding to cut.
4.
When finished cutting, cleaning the Cutter Housing, or to empty the Grass Basket,
first release the Switch Handle and wait for the motor to stop turning. Then, unplug the
extension cord from the Power Cord before proceeding.
Maintenance
Caution: Before performing any maintenance or adjustments on the Lawnmower, dis-
connect the Power Cord and extension cord from the electrical outlet.
General
1.
Clean all areas of the Lawnmower immediately after each use.
Do not allow grass cuttings to become dry and hard. This will affect the cutting
performance. Do not use water to hose down the Lawnmower. This will damage the
motor.
SKU 47336
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Periodically check all nuts, bolts, and screws for tightness, especially the Blade bolt.
Store the Lawnmower in a clean, dry location.
Periodically lubricate the axles and wheels with a light oil.
Cutting Blade Removal
1.
2.
3.
4.
To remove and refit the Blade (17), turn the Lawnmower over to reveal the Blade and
Impeller (16).
Hold the Blade with a gloved hand. With the other hand, remove the Blade securing
bolt and washer using a suitable spanner wrench.
Remove the Blade. If sharpening is needed, it should be done by a qualified
technician.
To replace the Blade, align the two Blade holes onto the two lugs on the bottom of the
Impeller. Replace the washer and bolt with the spanner wrench. Securely tighten.
Lugs
Locating Holes
Bolt and Washer
SKU 47336
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
Part#
1
Description
Screw
Part#
29
Description
Spring,Torsion
Discharge Cover
Handle,Lower(A&B)
Connector
2
Upper Cover
Motor,Electric
Washer
30
3
31
4
32
5
Washer,Spring
Screw
33
Nut
6
34
Knob
7
Sleeve
35
Screw
8*
9*
10
11
12
13
14
15
16
17
18
19a
21
22
23
24
28
Screw
36*
37
Switch
Cord Clamp
Connector Socket
Capacitor
Handle,Upper
Cord Jacket
Cable Clamps
Power Cord
Switch Handle
Screw
38*
39
Nylon Belt
Cutter Housing
Wheel Cover
Wheel
40*
41*
42*
43*
44*
45*
46*
47*
48*
49
Spring,Pushbutton
Pushbutton
Screw
Impeller
Blade
Bolt with Washer
Grass Basket
Spring,Drag
Ring,Check
Screw
Box,Upper Switch
BOX,Lower Switch
Cable
Axle,Front Wheel
Switch Assembly
Screw
50
Axle,Back Wheel
Shaft,Back Cap
51
52
Handle
Parts with asterisk are not available individually.You must purchase the Switch Assembly #50.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDEDTHE PARTS DIAGRAM INTHIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU-
TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE
IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATESTHAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
SKU 47336
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY DIAGRAM
SKU 47336
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
limited 90 dAy WArrAnty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or
accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, in-
juries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to
you. THiS WARRANTy iS expReSSLy iN Lieu OF ALL OTHeR WARRANTieS, expReSS
OR iMpLieD, iNCLuDiNg THe WARRANTieS OF MeRCHANTABiLiTy AND FiTNeSS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection verifies the defect, we will either repair or
replace the product at our election or we may elect to refund the purchase price if we cannot
readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not
within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
ReV 08C
SKU 47336
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
|