Harbor Freight Tools Grinder 31309 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Unpacking

This Angle Grinder comes fully assembled. When unpacking the Angle Grinder, check to make sure

the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at

the number on the cover of this manual. Refer to parts diagram at end of manual. Sort all hardware by

like kinds before assembling.

Item # Description

Qty

Grinder Body

Side Handle

Wrench

Grinding Wheel

Spare Brushes

Warning:

There are certain applications for which this tool was designed. Harbor Freight Tools strongly

recommends that this tool not be modified and/or used for any application other than which it was designed.

All accessories must be rated for at least the RPM speed recommended on the tool’s warning

label. Wheels and other accessories running over rated speed can fly apart and cause injury.

For safest operation, it is recommended that only these accessories be used with this product:

Abrasive Cut-Off Discs and Wheels

Wire Brushes

Flap Wheels

Wire Wheel Brushes

Always use an approved and proper guard when using the above mentioned accessories. Each

accessory must have the correct arbor size and must fit properly on the shoulder bushing. Make

sure accessories are tightened down securely.

CAUTION: NEVER INSTALL A CARBIDE TIPPED OR

STEEL CIRCULAR SAW BLADE FOR USE ON THIS

ANGLE GRINDER. NEVER INSTALL A WOOD CARVING

BLADE, CARVING DISC WITH SAW CHAIN CUTTERS, OR

A CUTTING CARVING DISC ON THIS ANGLE GRINDER.

Rev 03/01 REV 06/03

#31309

Download from Www.Somanuals.com. All Manuals Search And Download.