Haier Washer Dryer HWM75 0528 A User Manual

Fully Automatic Washing Machine  
User's manual  
This manual is for  
HWM75-0528 A  
Special number:  
837A  
Please read this manual  
carefully before using.  
Retain it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Packing list  
Names of the parts  
Water inlet valve  
Top lid component  
Water absorption  
cushion  
Detergent box  
Control pannel  
One  
One  
User's manual  
Warranty card  
Inside the document bag  
Inside the document bag  
Power cord  
Filter frame  
Softener inlet  
Handle  
Balance ring  
Inner tub  
Components of the water inlet  
hose  
Drain hose  
One  
Inside the accessory bag  
Pulsater  
Front control  
board  
Cabinet  
Fixed leg  
(3 pieces)  
Lint filter  
Inside the document bag  
One  
Drain hose frame  
Adjustable  
leg film  
Adjustable leg  
Back cover  
Tapping screws  
Bottom plate  
Eight  
Inside the accessory bag  
Meaning and description of the symbols  
Between the upper cushion of the washing  
machine package and the upper seal of the  
package carton  
One  
One  
Contents marked with that symbol are related to the safety  
of the product and the personal safety of the users. Please  
operate in strict conformity to the contents, otherwise it may  
cause damage of the machine or injure the personal safety  
of the user.  
Warning sign  
Automatic washing machine  
Contents marked with that symbol are actions forbidden to  
perform. Performing of those actions may result in damage  
of the machine or injure the personal safety of the user.  
Forbidden sign  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble-shooting answer to question  
Safety precautions  
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not  
breakdowns sometimes. Please confirm again before sending it to repair. Do not repair it by yourself.  
The washing machine must be positioned so that  
Please plug the power plug on special  
receptacle. Be sure to use three-pins  
power receptacle. Ensure that the earthing  
prong of the power receptacle is earthed  
reliably. Use leakage protector if possible.  
the plug is accessible. Be sure to pull the plug off  
and close the water faucet in following cases:  
power failure, delivering the machine, setting the  
machine idle or cleaning the machine. Do not plug  
or pull the power plug with wet hand.  
Phenomena  
The reason  
How to settle  
Buzzing upon reservation starts,  
the digitron displays "E0"  
The top lid is not closed  
Close the top lid  
Put down the drain hose. Open  
and close the top lid once.  
Clean the foreign material.  
Open and close the top lid once.  
Is the drain hose put down?  
Earth  
No or slow drain, the digitron  
displays "E1" , buzzing.  
Is the drain hose blocked by  
foreign material?  
Running pauses during spin,  
the digitron displays "E2",  
buzzing  
The top cover leaves open  
Close the top lid  
Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.  
Keep the pin of the power plug clean,if the power plug is polluted with dust,  
please wipe with dry cloth carefully.  
If the power cord or the power plug is bad, to avoid risk it is  
required to have it replaced by the technicians of our  
special shop or our customer care agent.  
Re-order the laundries. Close the  
top lid.Level the machine in right  
position.  
Are the laundries put slantingly?  
Is the machine slanting?  
Safety switch actuates, not  
spin, (after self-correction  
twice), the digitron displays  
"E3", buzzing  
Open and close the top lid once.  
Open the water tap.  
The water tap is not open  
No or slow water filling (not  
reaching the level in 40 min),  
the digitron displays "E4",  
buzzing  
Push the "Start/Pause" button.  
Clean the water inlet valve.  
Push the "Start/Pause" button.  
Wait for the normal water pressure  
Before use.  
The water inlet valve is blocked  
The water pressureis too low  
and the current is too small  
In case the washing machine is installed on ground  
with carpet, do not block the ventilation hole with  
carpet.  
Do not use water hotter than 50  
.
Please contact the after-sales  
service department.  
The water level sensor is bad.  
The ventilation  
holes at the bottom  
The digitron displays E6.  
Poor or no waterfall flow  
If the nozzle is choked with  
foreign bodies  
Remove the foreign bodies  
Back  
Soft object  
Is there power failure?  
Is the power plug loose?  
Use it when the power is on.  
Front  
Insert the power plug tightly.  
Affusion to the set water level.  
Not wash  
The machine does  
not act  
Does the water level arrive at the  
set water level?  
Is the power plug loose?  
Is the top lid closed?  
Insert the power plug tightly.  
Close the top lid  
Not spin  
Are the laundries put orderly?  
Put the laundries orderly.  
Do not wash water-proof laundries like  
the raincoat, bike covers etc. to avoid  
abnormal vibrations in spinning.  
Do not put the machine at damp place like  
the bathroom. Never wash it with water. Do  
not put wet laundries on the control panel.  
Is the machine slanting?  
Level the machine properly.  
Re-order the laundries.  
There's abnormal sound inside the  
machine  
Are the laundries slanting in  
spinning?  
Is the jointer screw of the water  
inlet hose is loose or twisted  
awry?  
Fasten the jointer screw  
properly.  
The water faucet leaks  
Common phenomena  
Phenomena  
Explanation  
Balance the laundries to avoid slanting.  
The spinning is intermittent when it starts.  
The wash procedure pauses.  
The cloth sensor is detecting , it will add water  
after about 48 senconds.  
Do not let the machine share one receptacle with other  
electric appliances. If the plugging into the receptacle  
is loose, do not use the plug any more.  
The program is setting the drain time , certain  
period is needed before it starts spinning.  
Select spin program, but it does not work.  
There may be some water flowing out of the  
drain hose in the first use of the machine.  
It is the water remained performance inspection  
by the factory.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
Disposal after washing  
After using, please clean the lint and foreign materials of the lint filter etc. in time.  
Otherwise it may influence your using the machine.  
Please first pull off the power plug from the receptacle before cleaning.  
Do not decompose, repair or alter the machine  
by yourself.  
Do not stretch hands into the working machine.  
It is dangerous even if the rotation is slow.  
Take special care of the children.  
The lint filter must be used during washing.  
It must be cleaned in time after each using.  
1. Take off the lint filter  
Put hand at the indicated position.  
Push down to take it off. ( See to Figure 1)  
2. Clean the lint  
Put it in water and clean while it is  
still wet.(See to Figure 2)  
Figure 1  
Do not put any hot or heavy items (such as the kettle  
with hot water) on the washing machine  
Do not wash laundries with volatile materials  
(such as thinner, petrol etc.).  
3. Install the lint filter  
After cleaning, insert the bottom  
of the lint filter ( marked with  
"down side") into the filter frame ,  
then push the upper part of the  
filter in ( marked with " up side ").  
(See to Figure 3)  
Benzene  
Figure 2  
Figure 3  
The appliance is not instruct for use of young  
children of infirm persons without supervision.  
Young children should be supervised to ensure  
that they do not play with the appliance.  
Keep the machine away from direct sunlight and  
heat source like the heater.  
If the cabinet is dirty, wipe it with wet cloth  
Do not flush it directly with water.  
Wipe it with neutral detergent.  
The filter screen of the water inlet  
valve is likely to be blocked by  
foreign materials andinfluence  
the water inlet. Please clean it  
Do not wipe it with thinner, petrol,  
alcoholetc.  
hol  
Alco  
Thinner  
Petrol  
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).  
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.  
3.Be sure to pull off the power plug before maintenance.  
4.Hang up the power cord and drain hose.  
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time  
(about 1 hour), then close the top lid.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and adjustment  
Please install and adjust the machine according to the requirement of the mannual.  
It is very important to your security and correct operating the machine.  
3 Push the " WATER LEVEL "button,select suitable water level  
Install the lint filter  
Install the bottom plate  
After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth.  
After defection, it can set the water level automatically. To select other water level, first push the "start/pause"  
button, then push the "water level" button to set the water level.  
After you open the package, please lean  
the washing machine gently down on soft  
items ( like the towel cloth,blanket, etc. ).  
Install the bottom plate to the bottom of the  
machine with the eight screws by a cross  
screwdriver, then lift the machine up gently.  
See to the figure:  
1.Press downward to assemble.  
2.Pull upward to detach.  
4 Push the "PROGRAM/RESERVE" button to select suitable reserve  
wash program  
Back  
After switching on the power, the reserve program is set to off mode automatically. If you need to  
set the washing procedure to be finished at reserved time, please push the "PROGRAM/RESERVE"  
button to set the reserve wash program two seconds. Refer to "PROGRAM/RESERVE"  
button in Page 11 for selection.  
Front  
Bottom plate  
Soft items  
Screw  
the washing will be finished after 18 hours.  
Adjust the Installation position  
5 Push the "Start/Pause" button  
The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in  
unstable running or stoppage of the machine. Please adjust it with following methods:  
Confirm it's horizontal:  
Hang the lead line to check if it is  
horizontal.  
6 Finish washing  
After finishing wash it will switch off power automatically  
Adjust the adjustable leg:  
1 .To twist the adjustable leg, please first lift up the  
side of the leg slightly, loosen the adjustable nut,  
and twist the leg.  
the adjustable nut  
the adjustable leg  
Fasten  
Loosen  
High  
2 . After adjustment, fasten the nut.  
Low  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to change the direction of the drain hose  
Steps of using the operation buttons and  
description of the steps  
b
1.Dismantle the rear cover of the washing machine.  
3.Dismantle the drain outlet protecting cover at the other side,  
(the way is the same as the drain bushing),then install the drain  
bushing, as indicated in Figure 4.  
2.Put down the drain hose .Take off the drain hose  
frame as indicated in Figure 1.Take the drain hose into  
the cabinet ,then nip the drain fixing clamp to make it  
deviated from the clip,the other hand is used to put down  
the drain bushing,as indicated in Figure 2,3.  
4.Extend the drain hose from the other side. Fix the drain hose  
with drain hose frame onto the cabinet, as indicated in Figure 5.  
Program  
STANDARD  
SOAK HEAVY  
GENTLE  
Drain outlet  
protecting cover  
SAVE  
COTTON  
SINGLE WASH  
RINSE SPIN  
SINGLE SPIN  
TUB CLEAN  
AIR DRY  
INDICATION OF PROCESS  
POWER  
ON/OFF  
TIME REMAINED(MINUTES)  
(NO CHOOSING)  
SOAK  
WASH  
RINSE  
SPIN  
Drain hose  
WATER  
LEVEL  
RESERVE(HOURS LATER)  
Digital display  
Fuzzy logic col  
Figure 5  
Figure 4  
START  
PAUSE  
10 water leve
PROGRAM/RESERVE  
Drain hose support  
Cabinet  
Drain bushing  
Figure 2  
Drain bushing  
Figure 1  
5.Install the drain outlet protecting cover to the other side,  
as indicated in Figure 6  
Inner  
Push  
Outer  
Drain bushing  
Take down  
Drain hose fixing  
clamp  
Figure 6  
Figure 3  
Push  
1.Push "POWER"button to switch on the power  
Remarks: in order to make sure of the correct of installation, it is suggested to change the direction of the drain hose  
with our company serviceman .  
POWER  
ON/OFF  
2.Push "PROGRAM/RESERVE" button to select  
suitable automatic program  
PROGRAM/RESERVE  
Usage the drain hose  
The drainage shall be smooth with the drain hose.  
After the power is switched on, "standard" is automatically set. To select other full-auto program, please push  
the "PROGRAM/RESERVE" button till the corresponding indicator is on. Refer to the "PROGRAM/RESERVE  
button" on Page 11.E.g  
1.The height of the drain hose shall be less than 10cm,  
or the drainage will not be smooth, and cost such long  
time that the machine may stop at mid way.  
4.If extra drain hose is needed, please make separate  
purchase. The inner diameter of the extra hose shall  
not less than 30mm, and the length shall not exceed  
1.5m.  
For instance:select "SAVE" program for small quantity of laundries with light soil.  
2.Do not step on or press the drain hose.  
Program select  
The running process  
(the digitron displays the running process)  
Program  
The display of digitron  
Application  
WASH(  
SOAK(  
)
)
SPIN(  
)
STANDARD  
Common washing  
RINSE(  
WASH(  
)
)
01  
02  
03  
SOAK HEAVY Washing for coverlet bigger laundries  
SPIN(  
)
RINSE(  
SPIN(  
SPIN(  
)
GENTLE  
)
)
Washing the woollen silk textiles  
3. If the drain hose is too long, cut it at mid point. To make  
smooth drainage, cut the front end of the hose slantingly.  
WASH(  
WASH(  
)
RINSE(  
RINSE(  
)
5.If the extra hose is too long, cut it either at A or at B.  
)
)
SAVE  
)
Washing for normal laundries  
Washing the cotton textiles  
04  
05  
06  
COTTON  
WASH(  
WASH(  
)
)
SPIN(  
)
RINSE(  
SINGLE WASH  
Reusing the washing detergent  
Washing the cloth washedby hand  
(first draining, then spinning)  
RINSE(  
)
RINSE SPIN  
SINGLE SPIN  
SPIN(  
)
07  
08  
Only spinning the cloth wetor washed by  
hand (first draining, then spinning)  
SPIN(  
SPIN(  
)
)
The spinning time is thesame to the single spin,  
but spinning in lower  
TUB CLEAN  
AIR DRY  
09  
10  
Avoid growing mildew on the outer tub and the  
inner tub  
SPIN(  
)
12  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Install the water inlet hose  
Confirm the water faucet  
"Power" button  
Reserve,Process,remain time digitron  
Push the "power" button to switch on the power.  
Under power-on mode, push it to switch off the power.  
Push the "power" button to switch on the power. If the  
"start/pause" button is not pushed, the machine will  
switch off the power automatically after 5 minutes.  
Water faucet,suitable  
Water faucet,not suitable  
It displays "--" during detecting.  
It displays remained reserve time (hour).  
It displays total remained time (min). If the total time  
exceeds 99 minutes, it uses "A" on tens digit to  
represent100 minutes, and uses "b" to represent 110  
minutes.E.g. "A3" represents 103 minutes.  
It displays abnormal symbol in abnormal situation.  
(See to Page15)  
Outlet end surface  
It is required that the front end shall be longer than 10mm.  
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.  
Connection between the water inlet hose jointer and the water faucet  
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the  
water inlet hose component. See to Figure 1.  
HT  
LIG  
2. Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet.  
See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen the  
four screws and take out the bushing in the jointer. The front end of the faucet must be smooth, otherwise  
it may leak water. See to Figure 3.)  
FLASH  
(MINUTES)  
POWER  
ON/OFF  
WATER  
LEVEL  
(HOURS LATER)  
Digitall display  
Fuzzyy logiic control  
10 water level selection  
PROGRAM/RESERVE  
water inlet hose jointer  
Screw  
Slider  
Sign plate  
Screw knife  
Bushing  
Figure 3  
Lock level  
WATER LEVEL button  
PROGRAM/RESERVE button  
The washing machine can detect the laundries automatically.  
After detection,it will set the water level to suitable value among  
4, 6, 8,and 10 automatically.  
Push down the program/ reserve button. You  
can select one program of ten which is  
standard,soak heavy, gentle,save,cotton,  
single wash,rinse spin,single spin,tub clean,  
air dry;  
water inlet hose  
Figure 2  
Figure 1  
You can also set water level by yourself. After the machine is started,  
it will not set water level automatically. You shall push thestart/pause  
button to make new setting.  
3.Fasten the four screws evenly. See to Figure 4.  
If there's water inside the tub, the machine cannot detect the  
laundries and will display water level 6 .  
Push the"program/ reserve" button to set the  
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure  
to seal up the exit end face of the faucet. See to Figure 5.  
reserve wash program morethan two seconds  
continuously;  
If save program is selected, it will display water level 2 .  
When water level 2 is reached in water filling, it will perform  
washing while filling water.When water level 3 is reached, it will  
change to normal washing.  
When the "reserve" function is activated, the  
indicator light of the program you have set will  
be off. The "reserve (hour)" and "time remain"  
indicator lights will be on;  
remark: Before installation, the threading is 4mmabove the upper surface of the nut.  
After installation, the threading is 2mm above the upper surface of the nut. See to figure 6.  
During operation of wash and rinse program, you can push down  
the water level button to add water. When you release the button, or  
it reaches the overflow water level, the machine will stop adding  
water.  
About 4mm before twisting  
About less than 2mm after twisting  
During reserve procedure, push the "reserve"  
button to display the reserve mode.To change  
the running program or cancel the reserve  
setting, you need to switch off the power and  
make new selection;  
The water level decided may be different from actual value because  
of the different moisture level of the laundries.  
Screw nut  
Figure 5  
Attention As selecting the waterlevel 1,3,5,7,9;the light  
is flashing;  
Figure 4  
Figure 6  
As selecting thewater level 2,4,6,8,10;the light  
is lighting;  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Use the operation buttons  
Description of operation button  
Connection between the water inlet hose and the washer  
1.Do not take off the water absorption cushion. Please check if the  
cushion is dropped or damaged before each usage. If it happens  
please contact our after-sale department immediately.  
a
nut of the water  
inlet hose  
Indicator mode and meaning  
2 Put the nut of the water inlet hose on the valve jointer.  
3 Fasten the nut. Swing it gently to confirm if it's suitable.  
Off:  
Flashing: indicate the running program  
jointer of the  
water inlet valve  
water absorption  
cushion.  
On: indicate the program about to run, or  
indicate the selected mode  
Connection between the jointer of the water inlet hose and the water inlet hose  
the jointer of the  
water inlet hose  
1.Push down the slider. Insert the water inlet hose into the jointer.  
Slider  
Program  
STANDARD  
Locking level  
2 Hang the lock lever to the jointer. Release the slider till a click  
sound is heard.  
SOAK HEAVY  
GENTLE  
SAVE  
COTTON  
INDICATION OF PROCESS  
SINGLE WASH  
(NO CHOOSING)  
RINSE SPIN  
SOAK  
TIME REMAINED  
SINGLE SPIN  
WASH  
TUB CLEAN  
AIR DRY  
RINSE  
SPIN  
RESERVE  
START  
PAUSE  
Check the connection between the jointer of the water inlet hose  
and the water faucet  
1.Swing the hose gently to confirm if it is fastened stable.  
2.After installation, open the faucet to check if it leaks.  
3.Do not bend the hose with overstrain.  
4.Before each usage please check if the connection  
between the jointer of the water inlet hose and the  
water faucet, and the installation of the water inlet  
hose are firm, so as to prevent dropping from  
improper installation position.  
START/PAUSE button  
After the power is switched on,press it to  
start the machine  
During working,push it to pause.  
During pause,push this button to restart and  
go on working  
Dismantle the water inlet hose  
1. Close the water faucet.  
2. Press the locking lever. Push down the slider. Then pull of the water inlet  
hose.  
Attention:  
Locking level  
If the machine is used frequently, the jointer of the water inlet hose can be  
on the faucet to prevent damaging the fixing screw.  
kept  
Slider  
1. The digitron displays the remained time and process alternately during the washing machine  
working.  
2. The process function is not selected solely .(see to Page 12)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.Preparation before washing  
3. Usage of the detergent  
How to use the softner  
Preparation before washing  
1.Connect the water inlet hose  
The usage and dose of the softener as per the specifications of softener.  
Before washing put the softener into the filling entrance(can be found on  
the balancing ring by rotating the inner tub, as illustrated in the left  
drawing, The softener will put into the washer when rinsing.  
After the softener is put in, please don't place for a long time otherwise  
softener may solidify and cause flowing not smooth.  
2.Confirm that the washing machine is earthed reliably.Then insert the  
Softener  
inlet  
SOFTNER  
power plug into the receptacle.Do not connect the earth terminal to the  
gas pipe and tap water pipe.  
3.Put down the drain hose.  
4.Slanting or uneven ground may result  
in unstable working or abnormal noise.  
Please make the machine stand horizontally.  
When the washer in spin process,please don't push "START/ PAUSE "  
button for fear that the softener is put in earlier, which affect the effects.  
Pay attention to followings before washing the laundries  
Control panel seat  
Add washing powder into the box directly  
as per indicated in left figure.  
Clear the pocket.  
Take out the coins ,  
sand,hairpins etc.  
Confirm if there's  
special requirement  
for the laundries.  
The quantity of the  
laundries shall not  
exceed the rated  
value. The big  
laundries like the  
jeans shall be put  
in loosely.  
Fasten the buttons  
and zippers.  
When the pulsator is  
running ,the buttons of  
the laundries may cause  
noise. For the sake of  
discretion ,please put  
the laundries with  
buttons into other  
After adding, close the box.  
Liquid detergent inlet  
laundries.  
How to use washing powder  
It is suggested to add washing powder into the box directly  
under fuzzy program and reserve program.  
How to use the whitener  
Dissolve directly inside the washing machine: (not applicable  
for fuzzy and reserve program)  
1.Add some water(select the "1" water level)  
2.Add washing powder. Run for about 30s to fully dissolve  
the powder. Then push the"start/pause" button.  
3.Put in laundries. Select suitable water level. Push the  
Fill water to decided level. Dilute  
the whitener with container. Pour  
it slowly into the washing tub.  
Avoid using whiteneron laundries  
with color or pattern as they are  
prone to lose color.  
a. Check if the laundries are applicable for washing with machine.  
b. Divide the laundries with unfast color from other laundries.  
c. Put those laundries difficult to absorb water into water with hand.  
button again.  
"start/pause"  
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,  
please apply detergent in advance, which can make it easier to remove the soil.  
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.  
f. Do not put those laundries polluted by chemicals directly into the washing machine.  
For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into  
mesh bag for washing.  
Quick dissolving of washing powder:  
The whitener shall not touch the  
laundries directly.  
Refer to theuser's manual for the  
usage and quantity of the whitener.  
For powder whitener, please  
dissolve it before use.  
1.Prepare warm water of 30 C and container.  
2. Add washing powder while stirring to dissolve it completely.  
Please add suitable washing powder as per the laundries  
quantity, the set water level and water quantity.  
If you select save program, it is suggested to use liquid  
detergent instead of washing powder to guarantee the  
2.Put in the laundries  
washing effect.  
It is not recommended to use rich-foam washing powder.  
The capacity of washing of the machine refer to the largest weight of the standard  
laundries under dry condition that can be washed in one time. Laundries quantity  
in one washing cycle shall be lower than the rated capacity.  
Washing powder with poor quality or long-time storage may  
get caked. Please clean the detergent box duly in usage.  
The thickness ,size , type of the cloth will influence the actual washing capacity.  
It is suitable to put inreasonable amount of laundries and the laundries can be turned  
round in washing for one time washing.  
4. Close the top lid  
If you open the top lid,the machine will stop working and alarm in  
spinning process.  
Do not select more than "4" water level for laundries less than 1.0kg ,so as to avoid  
splashing of water.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Baby Swing PD161994B User Manual
Grizzly Drill G9908 User Manual
Haan Carpet Cleaner FS 30P+ User Manual
Haier Dishwasher HDW300SS User Manual
Haier Refrigerator HB21TNNB User Manual
Hotpoint Cooktop 6511 User Manual
Hotpoint Stove GF640K User Manual
HP Hewlett Packard All in One Printer 2405 Q3086A User Manual
HP Hewlett Packard Weather Radio HP 85422E User Manual
Hunter Fan Humidifier 31206 User Manual