COLOR TV RECEIVER
OWNER'S MANUAL
The Owner`s Manual for the Follow Models:
D29FA9, D29FA9-A,D29FA9-AK, D34FA9,
D34FA9-A, D34FA9-AK
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
1. When you clean the TV set, please 4. Do not place the TV set near rain or
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TV set must only
be used in dry in
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
3. Don't place the
TV set in direct
sunlight or near a
heat source.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleanser or abrasive cloths.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
General speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
(additional purchase)
Mixer
additional
purchase
75 coaxial cable
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
* the plug type may vary
depending on the model.
Note
It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Take off the battery compartment cover. Place two AAbatteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Never place batteries in a fire.
Avoid dropping the remote control and/or getting it wet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Buttons and Plug-ins
Front and Side panel
Side AV terminal
USB
USB Terminal
VIDEO
Power switch
L
AUDIO
R
Cards Jack
MENU
TV/Video (input selector
Volume up/ down
Infrared receiver
Power indicator
Note:
The cabinet and buttons of TV is
only for reference.
TV/AV MENU
+CH -
+ VOL -
Channel position up/down
Back panel
Antenna input
VGA input terminal
VGA IN
AV2IN
AV1IN
YUV
AVOUT
VIDEO
Pb(cb)
Pr(cr)
L
L
L
L
AUDIO
R
R
R
R
AV output terminals
S-video input terminal
YUV input terminals
AV1 input terminals
AV2 input terminals
S-video input terminal: Special video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track
AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track
R
R
AV2 input terminals MONITOR : VIDEO AUDIO :L/MONO Track L/MONO ,R Track
AV1 input terminals MONITOR :VIDEO AUDIO :L/MONO Track L/MONO ,R Track
DVD component terminals:
R
R
Interleaved signal
Progressive signal
Y
Cb Cr AUDIO L/MONO Track L/MONO ,R Track
Pb Pr AUDIO L/MONO Track L/MONO ,R Track
R
R
Y
HDTV input terminals: Y Pb Pr terminal AUDIO L/MONO Track L/MONO ,R Track
R
1.When the AV2 terminal, USB terminal or the side AV terminal can not be
connected at the same time.
2.When the side AV is connected, please select the AV 2 terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Buttons of the Remote Control
Function buttons of the remote control
MUTE
STILL
TV/AV
HDM
POWER
Mute button
To eliminate the sound of the programs
DC standby and power button
TV and AV exchange button
A changeover between TV and other
input signals like AV
CALL/HELP
SCAN
I/II select button
Picture still button
Screen call/help button
HDM select button
Program scan button
SWAP
S.STD
Direct select button
Select a TV channel directly
Digital selection button
P.STD
Changeover from one digital, two
digital and three digital
CH+
Program swap button
Picture mode selection button
Sound mode selection button
Volume adjustment button
Program adjustment button
Menu call/select button
VOL-
MENU
CH-
VOL+
PICTURE
SOUND
Select menu, call and exi
Picture menu call/game direction select
Sound menu call/game direction select
Favorite program button
Shuttle button
FAVORITE SHUTTLE
FUNCTION
TIME
ZOOM
T.SKIP
TUNE
Function menu call/game menu select
Tune menu call/game confirm
Zoom select button
H.LOCK D.ALBUM CAL./EXIT
Time skip button
Time menu call button
Calendar/amusement function exit button
Hotel lock button
Digital album No available
Download from Www.Somanuals.com. All Manuals Search And Download.
The Screen Display Menu
For your convenienceof operation, herelists the screendisplay menus ofthis model
as your reference.
Picture menu
Sound menu
MENU
MENU
Picture Mode Standard
Sound Mode
Picture
Standard
Picture
Sound
Tune
Brightness
Contrast
Color
50
50
50
0
3D MONO
Off
Off
Off
Off
0
Sound
Tune
SRS Dialog
Trubass
Hue
Woofer
Sharpness
30
Setup
Timer
Setup
Timer
Balance
Filter
Advance
Equalizer
Tuning menu
Setup menu
MENU
MENU
Language
Picture
English
On
Exchange
Program edit
Picture
Sound
Tune
Screen Saver
Sound
Tune
Curtain
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
Search
Setup
Timer
Auto Search
Quick Search
Setup
Timer
0
Time menu
H.lock menu
Lock Set
MENU
Current time
12 27
Picture
Sound
Tune
Change Password
New PWD
Confirm PWD
Confirm
Off Time
--
--
--
--
----
----
On Time
On program
Remind time
Remind program
Sleep Time
10
-- --
---
Lock
Channel Lock
Off
Off
Setup
Timer
Off
Note:
When the TV set ispowered on, theremight be different from what have been
illustrated above. Pleasedo some adjustmentas follows tomeet your needs.
1. Press theMENU button, andthen press CH+/-buttons to select the menu in the
main menu: PICTURE, SOUND, TUNE ,SETUP and TIMER. Off course, you may
select these menusdirectly by pressingthe PICTURE, SOUND, TIME and FUNCTION
buttons on theremote control.
2. If itis not insub-menu, press theVOL-/+ buttons toenter the sub-menu.
3. Then press the CH+/-to select thedesired item, pressthe VOL-/+buttons toadjust
the numerical value. After that, press the MENUbutton to returnthe main menu.
4. If youwant exit themenu, press theMENU button repetitiously.
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch on/ off the TV set
In the following, the methods of using power switch and remote control to switch on/off
power supply for the TV set will be explained.
Switch on/ off the TV set
Switch on/ off the TV set
1.Connect the power supply wire. Then press the power
switch button, the power indicator will light, in several
seconds the picture will display on the screen.
2. If the TV is in the state of standby, press the POWER
button or the CH+/- buttons on the remote control.
Note:
1. Press the P+/- buttons which is on the TV set to get
out of the standby state when the remote control is not
in use.
POWER
2. Press the POWER button onthe remote control
to the standbymode.
3. Press the power button onthe TV set to
completely power off the TV.
4. To eliminate themagnetization completely, the
TV set degaussesautomatically. There is the
sound of PENG, it is natural.
Automatic stand by function
If no signal has been received, and after five
minutes, it will stand by automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Programs
Watching TV programs
How to select the TV program
Select the desired program
1. Use thedirect number selectionbutton
Press the button from 0-9 to select a one-figure channel.
If you want to select a double figures channel, press the
figure-selection button and change it into two-figure mode, then
press the number of the channel.
If you want to select a three figures channel, press the figure-selection
button and change it into three-figure mode, then press the number
of the channel.
2. Use the CH+/- buttons
Press the CH+ button to select the channel of the larger number.
Press the CH- button to select the channel of the smaller number.
CH+
MENU
CH-
VOL-
VOL-
VOL-
VOL+
VOL+
VOL+
Select the desired sound
Press the VOL+/- buttons to adjust the volume to your need.
If the colour or sound of a certain channel is
abnormal
If the TV set youbought is
abnormal in colour or sound ina
certain channel, itmight be
because the colouror sound
CH+
MENU
CH-
MENU
Language
Screen Saver
Curtain
English
On
Picture
Sound
Tune
system has beenset improperly.
You may follow theinstruction
below to adjust it. Press the
MENU button, thenpress CH+/-
buttons to selectfunction menu,
and you can see the form. Then
press VOL+ buttonto enter sub-
menu.
Color sys.
HDM scan
Transparency
Tilt
PAL50
60Hz
On
Setup
Timer
0
If the colourof the pictureis abnormal
Press the CH+/- buttons to move the indicator to "Color Sys.", and
press the VOL+/- buttons to select the proper color.
CH+
MENU
CH-
If the soundis abnormal
Refer the above steps to enter the
Program edit menu. Press the CH+/-
buttons to move the indicator to
"Sound Sys.", and press the VOL+/-
buttons to select the proper sound.
Program edit
Program NO.
2
Skip
Off
Off
DK
Lock
Sound Sys.
Fine tune <144.20MHz>
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Programs (continued)
Swap function enables quick swap to the last watched program.
Program swap and auto scan functions
Program swap
1. Suppose the channel number
you used just now is 8 and the
channel number you are using
SWAP
is 18 (as shown in the figure).
2. If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3. If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1. Press the SCAN button to
SCAN
scan through all the memorized
TV channels.
CH+
2.When it is the program that
you desired, and press the
MENU button to confirm.
VOL-
MENU
CH-
VOL+
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
The TV set has three methods to set the channels, which are Auto search, Search and Fine tune.
In this section, how to use the remote control to set the channel is explained. You can also use the buttons
on the TV set to set channel.
Auto search
Auto search
1. Press the MENU button to display
the menu, then press CH+/-buttons
MENU
to select TUNE menu, press VOL+
Exchange
Picture
Sound
Tune
button to enter.
Program edit
Search
Auto Search
Quick Search
Setup
Timer
CH+
MENU
CH-
2. Press the CH+/- buttons to move
the indicator to " Auto Search ".
MENU
Picture
Sound
Tune
VOL-
VOL+
Exchange
Program edit
Search
Auto Search
Quick Search
Setup
Timer
3. Press the VOL+ button, and
"Auto Search" mode will work.
The TV set will search automatically
all available programs, after search
is finished, all available programs
will be stored in turn.
Auto Search
VHF-L 188.16 MHz
CH NO:4
If you wantto stop thesearch,
just press theMENU button.
The order ofthe automatic searchis due tothe frequency of
the program, generallyspeaking, it isused only thefirst time
you search theprogram, and afterthe order ofthe program
has been made, you don't haveto use thisfunction,
otherwise the orderof the programwill be mixed.
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Search
Search
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number.
2. Press the MENU button to display
the menu, then press CH+/-buttons
to select TUNE menu, press VOL+
button to enter.
CH+
MENU
CH-
. Press the CH+/- buttons to
move the indicator to "Search",
and then press the VOL+ button
to enter the SEARCH menu.
MENU
Picture
Sound
Tune
VOL-
VOL+
Exchange
Program edit
Search
Auto Search
Quick Search
Setup
Timer
4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue
to search until it has searched the TV
signal you need.
Search
VHF-L 188.16 MHz
CH NO:4
Note:
CALL/HELP
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL/HELP button once.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Fine Tune and Program Lock functions
Fine Tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number. ( For example, the
channel 1.)
CH+
MENU
CH-
VOL-
VOL+
2. Press the MENU button to display
the menu, then press CH+/-buttons
to select TUNE menu, press VOL+
MENU
button to enter.
Exchange
Picture
Sound
Tune
3. Press the CH+/- buttons to
move the indicator to " Program
edit ", then press the VOL+ button
to sub-menu.
Program edit
Search
Auto Search
Quick Search
Setup
Timer
4. Press the CH+/- buttons to
CH+
move the indicator to " Fine Tune ".
Program edit
5. Press the VOL+ button to enter
the Fine Tune Menu, and then the
VOL- button to search downwards
or the VOL+ button to search
upwards until it has searched the
TV signal you need.
VOL-
MENU
CH-
VOL+
Program NO.
Skip
2
Off
Off
DK
Lock
Sound Sys.
Fine tune <144.20MHz>
Program Lock buttons
If the program Lock and the program Lock of the Lock
Set are ON, the screen is black and LOCK will shown.
The program is locked.
CH+
1.Repeat the steps 1-4 of Fine
Tune to select the Lock item.
Program edit
VOL-
MENU
CH-
VOL+
Program NO.
Skip
2
. Press the VOL+ button to turn
the Lock function to "On ".
Off
Off
DK
Lock
Sound Sys.
. Press the H.Lock button to turn
the Program Lock function to "On "
(Refer to page 27),then the screen
Fine tune <144.20MHz>
is black. After setting the Program Lock to On, the Lock of the
Program Edit menu will fail.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Skip unnecessary channel
Skip unnecessary channel
The Program skip feature enables you to skip/hide programs
that you do not wish to be displayed when using the CH+/-
buttons. These channels will still be displayed by directly
using the channel number buttons on the remote control.
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number. ( For example, the
channel 1.)
CH+
MENU
CH-
VOL-
VOL+
2. Press the MENU button to display
the menu, then press CH+/-buttons
MENU
to select TUNE menu, press VOL+
Exchange
Picture
Sound
Tune
button to enter.
Program edit
Search
3. Press the CH+/- buttons to
move the indicator to " Program
edit ", then press the VOL+ button
to sub-menu.
Auto Search
Quick Search
Setup
Timer
4. Press the CH+/- buttons to
move the indicator to " Skip ".
Program edit
CH+
MENU
CH-
Program NO.
Skip
2
Off
Off
DK
. Press the VOL-/+ buttons to
turn the Skip function to "ON ".
Lock
VOL-
VOL+
Sound Sys.
Fine tune <144.20MHz>
. Press the MENU button to exit
the menu display.
If you want to recover the skipped channel
1. Use the Channel Selection buttons to select the number of the
channel to be recovered.
2. Repeat those steps just now.
3. Press the VOL+/- buttons to turn the SKIP function OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Exchange Programs
Exchange Programs
This feature enables TV programmes that may be on a wrong program
number to be moved to another number.
This feature is very useful when Automatic Search Tuning has been used
because programmes are stored in the order they are found, which is usually
not the desired order.
When organising, it is best to start from the lowest programme number first.
1. Press the MENU button to display
the menu, then press CH+/-buttons
MENU
to select TUNE menu, press VOL+
Exchange
Picture
Sound
Tune
button to enter.
Program edit
Search
2. Press the CH+/- buttons to
CH+
MENU
CH-
Auto Search
Quick Search
Setup
Timer
move the indicator to " Exchange ".
VOL-
VOL+
3. Press the VOL+ button to
sub-menu.
Exchange
Current Program
Exchange Program
Exchange
3
9
4. Press the VOL-/+ buttons to set
the Current Program to 3.
. Press the CH+/- buttons to move the indicator to " Exchange
Program ", then press the VOL-/+ buttons to set the Exchange
Program to 9.
CH+
MENU
CH-
VOL-
VOL+
. Press the CH+/- buttons to move the indicator to " Exchange ",
press the VOL-/+ buttons to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjusting
Select the picture modes and set the picture quality
How to select the picture modes
You can quickly select the desired picture mode from four
preset modes and one customized mode.
P.STD
Press the P.STD button to select the desired picture quality.
MODE
PICTURE QUALITY
Medium color and brightness
Low color and brightness
Set by yourself
Standard
Soft
User
(No pictures)
Listen
Rich
Bright color
Set the picture quality
When the Picture Mode is User mode, you can set the picture
quality
1. Press the PICTURE button, the
Picture menu will appear on the
PICTURE
screen.
MENU
Picture Mode Standard
Picture
Brightness
Contrast
Color
50
50
50
0
. Press the CH+/- buttons to
Sound
Tune
move the indicator to the desired
option (For example, Contrast), then
press VOL-/+ buttons to set the
desired quality. Press the PICTURE
button to exit the Picture menu.
Hue
Sharpness
30
Setup
Timer
Filter
Advance
CH+
Option
Press VOL+ button
Press VOL- button
VOL-
MENU
CH-
VOL+
Brightness
Contrast
Color
Dark
Weak
Light
Soft
Bright
Strong
Thick
Sharpness
Sharp
Tip: HUE option is available only in N color system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjusting (Continued)
Filter Function
Filter Function
PICTURE
1. Press the PICTURE button, the
Picture menu will appear on the
screen.
MENU
Picture
Sound
Tune
Exchange
Program edit
Search
Auto Search
Quick Search
Setup
Timer
. Press the CH+/- buttons to move
the indicator to "Filter".
CH+
. Press the VOL+ button to
the Filter sub-menu.
Filter Mode Standard
VOL-
CH-
VOL+
. Press the CH+/- buttons to select
the desired option, then press
VOL-/+ buttons to adjust the value.
Press MENU button to exit the sub-menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjusting (Continued)
3A Optimize and 3DNR Functions
3A Optimize Function
1. Press the PICTURE button, the
Picture menu will appear on the
PICTURE
screen.
MENU
Picture
Sound
Tune
Picture Mode Standard
Brightness
Contrast
Color
50
50
50
0
Hue
. Press the CH+/- buttons to move
the indicator to "Advance", then
press the VOL+ button to sub-
menu.
Sharpness
30
Setup
Timer
Filter
Advance
. Press the CH+/- buttons to move
C+
MENU
Picture
Sound
Tune
the indicator to "3A Optimize".
3A Optimize On
Comb filter
3DNR
Off
Off
Off
Off
. Press the VOL-/+ buttons to
VOL-
MENU
CH-
VOL+
Layer en.
Color en.
select "On", "Off" or "Window".
Setup
Timer
3DNR Function
1. Press the PICTURE button, the
Picture menu will appear on the
screen.
PICTURE
MENU
Picture
Sound
Tune
Picture Mode Standard
Brightness
Contrast
Color
50
50
50
0
. Press the CH+/- buttons to move
the indicator to "Advance", then
press the VOL+ button to sub-
menu.
Hue
Sharpness
30
Setup
Timer
Filter
Advance
. Press the CH+/- buttons to move
the indicator to "3DNR".
MENU
Picture
Sound
Tune
CH+
MENU
CH-
3A Optimize On
Comb filter
3DNR
Off
Off
Off
Off
. Press the VOL-/+ buttons to
select the desired item.
VOL-
VOL+
Layer en.
Color en.
Setup
Timer
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjusting (Continued)
Comb filter and Layer En./Color En. Functions
Comb filter Function
1. Press the PICTURE button, the
PICTURE
Picture menu will appear on the
MENU
Picture Mode Standard
screen.
Picture
Sound
Tune
Brightness
Contrast
Color
50
50
50
0
Hue
. Press the CH+/- buttons to move
the indicator to "Advance", then
press the VOL+ button to sub-
menu.
Sharpness
30
Setup
Timer
Filter
Advance
. Press the CH+/- buttons to move
the indicator to "Comb filter".
MENU
Picture
Sound
Tune
CH+
MENU
CH-
3A Optimize On
Comb filter
3DNR
Off
Off
Off
Off
VOL-
VOL+
. Press the VOL+/- buttons to select
"On".
Layer en.
Color en.
Setup
Timer
Layer En./Color En. Functions
1. Press the PICTURE button, the
Picture menu will appear on the
PICTURE
MENU
screen.
Picture Mode Standard
Picture
Brightness
Contrast
Color
50
50
50
0
Sound
Tune
Hue
. Press the CH+/- buttons to move
Sharpness
30
Setup
Filter
Advance
Timer
the indicator to "Advance", then
press the VOL+ button to sub-
menu.
. Press the CH+/- buttons to move
CH+
MEN
CH-
MENU
the indicator to "Layer en." Or
Picture
3A Optimize On
Sound
"Color en.".
Comb filter
3DNR
Off
Off
Off
Off
VOL-
VOL+
Tune
Layer en.
Color en.
Setup
. Press the VOL+/- buttons to select
Timer
"On".
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjusting
Select the sound modes and set the sound quality
How to select the sound modes
You can quickly selectthe desired sound mode from three
preset modes and one customized mode.
S.STD
Press the S.STD button to select the desired picture quality.
Four kinds of sound modes can be selected in turn.
S o u n d q u a l i t y
Standard
TV Mode
Standard
Speech
News
User
You can set it by yourself
Musical
Music
Set the sound quality
When the Personal mode is selected, you can customize the
sound quality.
SOUND
1. Press the SOUND button, the
Sound menu will appear on the
MENU
screen.
Sound Mode
3D MONO
SRS Dialog
Trubass
Standard
Picture
Sound
Tune
Off
Off
Off
Off
0
. Press the CH+/- buttons to move
the indicator to the desired option,
then press VOL-/+ buttons to set the
desired quality. Press the SOUND
button to exit the Sound menu.
Woofer
Setup
Timer
Balance
Equalizer
CH+
MENU
CH-
Adjusting the Balance item
Option
Press VOL- button Press VOL+ button
R track down
VOL-
VOL+
BALANCE
L track down
Adjusting the Special items
Option
Setting "On"
3D dynamic surround
SRS Dialog
3D MONO
SRS Dialog
Trubass
Enhance bass
Enhance woofer
Woofer
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjusting (Continued)
Equalizer and Mute functions
SOUND
Equalizer function
1. Press the SOUND button, the
Sound menu will appear on the
screen.
MENU
Picture
Sound
Tune
Sound Mode
3D MONO
SRS Dialog
Trubass
Standard
Off
Off
Off
Off
0
. Press the CH+/- buttons to move
the indicator to "Equalizer".
Woofer
Setup
Timer
Balance
Equalizer
CH+
. Press the VOL+ button to sub-
VOL-
MENU
CH-
VOL+
menu.
Equalizer
. Press the VOL-/+ buttons to
select the desired item.
CH+
MENU
CH-
. Press the VOL+/- buttons to
adjusting.
VOL-
VOL+
Tip: The Equalizer can be adjusting only for the
personal mode.
How to use the Mute function
When you want to listen to the sound nearby, or when you are
answering the telephone, or talking with your friends, you may use
the mute function.
1. Press the MUTE button once, a
X
sign of mute will appear on the
MUTE
screen, the sound will be eliminated
completely .
2. Press thevolume button or
press the MUTEbutton again,
and the soundwill be recovered.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Set Up Function
This model has time set function such as On/Off Time, Sleep and Remind Time, etc.
The unit of the TIME menu is minute.
Set current time and On/Off Time functions
Set current time
When this functionis used, pleasefirst check whetherthe
clock is inaccordance with yourlocal time; ifnot, you can
follow the instructionsto adjust it.
TIME
1. Press the TIME button, the Time
menu will appear on the screen.
MENU
Current time
Off Time
12 27
. Press the CH+/- buttons to move
Picture
Sound
Tune
--
--
--
--
the indicator to " Current Time ".
Tips:
On Time
CH+
MENU
CH-
On program
Remind time
Remind program
Sleep Time
10
-- --
---
The available option is green.
Press the VOL-/+buttons to
select the desireditem.
Press the CH+/-buttons to
adjust the value.
Setup
Timer
Off
VOL-
VOL+
After settingthe Current time, press MENU buttonto confirm.
On/Off Time function
The TV set can bepowered on/off at a presettime and itcan
start with aprogram you havepreset.
TIME
Here take OnTime functionfor example. The Off Time function
is same withit.
1. Press the TIME button, the Time
MENU
menu will appear on the screen.
Current time
Off Time
12 27
-- --
Picture
Sound
Tune
On Time
18 00
10
. Press the CH+/- buttons to move
On program
Remind time
-- --
the indicator to " On Time ".
Tips:
The available optionis green.
Setup
Timer
Remind program
Sleep Time
---
Off
CH+
MENU
CH-
Press the VOL-/+buttons to select
the desired item.
Press the CH+/-buttons to adjustthe value.
VOL-
VOL+
After settingthe Current time, press MENU buttonto confirm.
. Press the CH+/- buttons to move
MENU
the indicator to " On Program ", then
Current time
Off Time
12 27
Picture
Sound
Tune
press the VOL-/+ buttons to adjust
(For example, 10).
23
00
18 00
10
On Time
On program
Remind time
Note:
-- --
Setup
Timer
Remind program
Sleep Time
---
This function willonly be
available when theTV set
is in themode of standby.
Off
4. Repeat step 1-2 to turn OFF
TIME.(take 23:00 as an example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Set Up Function (Continued)
Remind Program Function
Remind Program Function
With Remind Program function, the TV set can automatically
change a preset program in a preset time .
1. Press the TIME button, the
TIME
Time menu will appear on the
MENU
Current time
12 27
Picture
Sound
Tune
screen.
Off Time
23
00
18 00
10
On Time
On program
Remind time
-- --
Setup
Timer
Remind program
Sleep Time
---
Off
CH+
MENU
CH-
. Press the CH+/- buttons to move
the indicator to " Remind Time ".
MENU
Picture
Sound
Tune
Current time
Off Time
12 27
23
00
18 00
10
Tips:
VOL-
VOL+
On Time
The available option is green.
Press the VOL-/+buttons to
select the desireditem.
Press the CH+/-buttons to
adjust the value.
On program
Remind time
19 00
Setup
Timer
Remind program
Sleep Time
---
Off
After settingthe Current time, press MENU buttonto confirm.
. Press the CH+/- buttons to move
MENU
the indicator to " Remind Program ",
Current time
Off Time
12 27
Picture
Sound
Tune
23
00
18 00
10
then press the VOL-/+ buttons to
adjust (For example, 18).
On Time
On program
Remind time
19 00
Setup
Timer
Remind program
Sleep Time
18
Off
TIP:
The unit of the TIMER menu is minute.
Screen Display
CALL/HELP
Press CALL/HELP button to call
the screen display, such as
channel number, colour system,
sound system.
3
PAL 50
DK
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function
Select the menu Language and Screen Saver function
How to select the menu Language
You may choose Chineseor English.
1. Press the FUNCTION button,
the Function menu will appear on
FUNCTION
MENU
Language
Screen Saver
Curtain
English
On
the screen.
Picture
Sound
Tune
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
. Press the CH+/- buttons to move
the indicator to " Language ", then
press the VOL+ button to select the
desired language, then the OSD
language of the TV set turn to the
OSD language selected.
Setup
Timer
0
CH+
VOL-
MENU
CH-
VOL+
How to start screen saver function
When the SCREEN SAVER is ON, If no signal has been received,
and after five minutes, it will stand by automatically.
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
MENU
Language
Screen Saver
Curtain
English
On
the screen.
Picture
Sound
Tune
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
Setup
Timer
CH+
0
. Press the CH+/- buttons to move
the indicator to " Screen Saver ".
VOL-
MENU
CH-
VOL+
. Press the VOL+ button to turn
the function ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function (Continued)
Select Switch on mode and HDM scan function
Select Switch on mode
There are some kind of Switch on mode, such as
,
,
, etc. You can choose one you need.
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
MENU
Language
English
the screen.
Picture
Sound
Tune
Screen Saver
Curtain
On
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
Setup
Timer
CH+
0
. Press the CH+/- buttons to move
the indicator to " Curtain ".
VOL-
MENU
CH-
VOL+
. Press the VOL+ button to select the
desired Switch on mode.
HDM Scan function
The HDM scan includes Pixel,75Hz,100Hz and 60P, etc.
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
MENU
Language
Screen Saver
Curtain
English
On
the screen.
Picture
Sound
Tune
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
Setup
Timer
CH+
0
. Press the CH+/- buttons to move
the indicator to " HDM scan ".
VOL-
MENU
CH-
VOL+
. Press the VOL-/+ buttons set the desired scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function (Continued)
Tilt function and setting Transparency Menu
Tilt function
When the TV set is affected by the geomagnetism so
that the whole picture turn tilt, you can use the function.
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
MENU
Language
Screen Saver
Curtain
English
On
the screen.
Picture
Sound
Tune
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
Setup
Timer
CH+
0
. Press the CH+/- buttons to move
the indicator to " Tilt ".
VOL-
MENU
CH-
VOL+
. Press the VOL-/+ buttons to adjust.
Setting Transparency Menu
When the function is ON, the menu display is
transparent .
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
MENU
the screen.
Language
Screen Saver
Curtain
English
On
Picture
Sound
Tune
Color sys.
HDM scan
Transparency
Tilt
PAL50
100Hz
On
Setup
Timer
CH+
0
. Press the CH+/- buttons to move
the indicator to " Transparency ".
VOL-
MENU
CH-
VOL+
. Press the VOL+ button to turn
the function ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protectyour TV set.
Change your password
Change your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
H.LOCK
1. Press the H.LOCK button,
then press the Digital number
button to input the password,
screen will showas the form
Password
----
on the right.
CH+
MENU
CH-
. Press the CH+/- buttons to move
the indicator to " New PWD",
VOL-
VOL+
Lock Set
Change Password
New PWD
Confirm PWD
Confirm
and then press the Digital number
button to input the password.
----
----
Lock
Channel Lock
Off
Off
. Press the CH+/- buttons to move
the indicator to " Confirm PWD",
and then press the Digital number
button to input the password again.
Lock Set
Change Password
New PWD
Confirm PWD
Confirm
Lock
Channel Lock
----
----
. Press the CH+/- buttons to move
the indicator to " Confirm", and then
press the VOL+ to confirm. If it is
correct, then the screen displays
change successfully.
Off
Off
5. If the confirmed password is not accordance with the
new password, then the screen will display failure.
Tip:
After changing the password, you must memorize the
new password for fear you can not use the function.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock (Continued)
Setting the Lock
Setting the Lock
There are Child Lock and Program lock setting, you
can set it due to your need.
H.LOCK
1.Press the H.LOCK button,
the screen will show as the
form on theright.
Password
----
CH+
MENU
CH-
2.Press the Direct-digit
Choosing button 0 for four
times( or inputthe password
you set) toenter the Lock
Menu.
VOL-
VOL+
Lock Set
Change Password
New PWD
Confirm PWD
Confirm
----
----
Lock
Channel Lock
Off
Off
3.Press theCH+/- buttons to
move the indicator to "Lock",
then press theVOL+ button to
turn the functionON or OFF.
Description of each lock function
1.When the LOCK is set ON, if the buttons on the TV are
pressed, the screen will indicate that the TV set is in the
status of Lock, and the buttons won't work.
2.The Channel Lock allows the TV to always be on the same
channel when you turn it on.
3. If you forget your password or a password is accidentally set
enter 9443 as the password. This will enable you to regain
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
Others Functions
Calendar, Picture Still and Zoom functions
Calendar function
Note: The calendar can not renew automatically.
CAL./EXIT
1. Press the CAL./EXIT button,
the Calendar menu will appear on
the screen.
Sun Mon Tue Wed Thu Fri Sat
CH+
MENU
CH-
. Press the VOL-/+ buttons to move
the indicator to the year / the month,
and then press the CH+- buttons to
adjust the year and the month, to
demand the desired date.
VOL-
VOL+
Picture Still function
STILL
When you watching TV, press
the STILL button to still the
picture. Press the STILL button
or any others to resume the
playing.
Still
Zoom function
ZOOM
When you watching TV, press
the ZOOM button to change the
picture scale.
Zoom
NORMAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Others Functions (Continued)
Setting and Using Favorite programs, Setting Sleep Timer
Setting Favorite programs
After setting the Favorite function, you can select the
programs that you favorite.
FAVORITE
1. Press the FAVORITE button
twice, then the screen displays
the Favorite menu.
Favorite
No . Program
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
2. Press the CH+/- buttons to move
the indicator to "NO.1 ".
Current Program
2
CH+
MENU
CH-
3. Press the VOL-/+ buttons to
turn the Prog NO.1 to 9.
VOL-
VOL+
Favorite
No . Program
(Suppose the channel 9 is one your
favorite program.)
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
4. Repeat above steps to set
other program or preset the
programs.
Current Program
2
Using Favorite function
FAVORITE
Press the FAVORITE button continuously, you can select
the favorite programs that are set.
Setting Sleep Timer
TIME
1. Press the TIME button, the
Time menu will appear on the
MENU
screen.
Current time
Off Time
12 27
Picture
Sound
Tune
--
--
--
--
On Time
CH+
MENU
CH-
. Press the CH+/- buttons to move
the indicator to " Sleep Time".
On program
Remind time
Remind program
Sleep Time
10
-- --
---
Setup
Timer
Off
VOL-
VOL+
. Press the VOL+ button to turn the time or Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Others Functions (Continued)
VGA input adjustment
Setting the PC software
1.First, click on Settings on the Windows start
menu and click on "Control Panel".
2.Double click on the Display icon.
3.Click on the Settings tab on the display
dialog-box.
4.Adjust the resolution to 640X480 pixels
5.Click the Advanced button and click the Monitor
tab on the dialog-box. Set the vertical-frequency
to 60Hz and then click the OK button.
6. Connect the PC to the TV set by the VGA terminal.
VGA input adjustment
1. Press the TV/AV button,
then press CH+/-buttonsto
select the PC input mode.
Press the VOL-/+buttons to
confirm.
TV/AV
. Press the MENU button to move
the indicator to " Advan", and press
MENU
H-Position
V-Position
H-Range
PCC
0
0
0
0
VOL+ button to enter the sub-menu.
Picture
Sound
Advan
Setup
Timer
CH+
MENU
CH-
KEY
0
TCC
0
0
BCC
3.Press the CH+/- buttons to move
the indicator to the desired options,
then press the VOL+/- buttons to
adjust the effect of the screen .
VOL-
VOL+
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System
Multi-media player preparation
1. Supported equipment
1)Equipment supporting Mass Storage agreements include USB, mobile hard disk, card
reader, someMP3 and digitalcamera.
2)Equipment supporting PTP agreementsinclude some digital cameras.
2. 1 Supportingmedia:
picture, music, MPEG4, MPEG2and MPEG1;
Supportingfileformats
*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3, *.WHA, *.JPG and *.JPEG. Due to particularityof file
code and fileformat, It ispossible that some files maynot be read.
2 If Pic& Music modeis activated, relativemedia file formatwill include JPEG and MP3files.
After Picture is selected, MP3 files set for play will open both music and picture files for sync
play performance.As some filesare read whilemusic is beingplayed, the responseof picture
operation response mightbe affected.
3.Before starting to operation, verify USB storage device is of FAT32 and FAT file system
format. Atpresent, this televisiondoes not supportNTFS and thefile systems ofother format.
4.Many movie files use suffix of AVI and MPG. However, many kinds of format are used for
internal files. This television canonly play someAVI and MPGfiles of thisformat. Those files
with suffixof dat arenot movie files,expect data files used bycomputers, and cannotbe played
for movies.
5.External card reader supports most digital cards available in the market. Readable digital
cards are classifiedaccording to theproperty of cardreaders and canbe connected tomobile
hard disks (workingvoltage 5.0V, working currentnot over 500mA).
6. Sometimes the television operationmay be halteddue to excessiverate of informationcode
errors. In such case, restart the system. Because there are many non-standard USB mobile
devices in the market. If this kind of USB mobile devices are used in the Multi-media play
system, the problemof identification failuremight occur.The same problem may alsohappen
with computers, nottelevisions.
7.It is suggestedthat the externaldevices with USB2.0interface be usedto improve velocityof
information reading andcontinuity of informationplaying.
USB setup
1.Insert USB in the USB slots at the right side the TV.
2.Insert it to be clicked in.
3.Press USB button on the remote controller to enter the Multi-media system.
CARD setup
This TV is Compatible with the card of SD/MMC/CF/MS/SM format.
How to use
1.Jack of card Instructions
Jack of SM card
Jacks of SD MMC MS card
Jack 1
Jack 2
Jack of CFcard
Note
1.Please note chooses uses the digital memory card with you corresponds the receptacle.
2.Card reader in 1 cannot simultaneously insert two kind of cards in the graphical representation
position
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Multi-media player preparation
2.Insert the card as right direction. As following Card in
common use
1
CF card
3
MS card
jack
2
MMC card
jack
jack
MULTIMEDIA
CARD
COMPACT FLASH
DIGITAL MEMORY CARD
128
128
4
SM card
jack
5
SD
jack
SD
128MB
128MB
ID
Note:
1.the card insertiontime, after theflows media systemstarts 2s , insert
the card tonumerical code cardreader , donot bring cardto start flow
media system. 2. After cardinsertion, indicator lightwill shines, and
enters glitters condition, after period oftime , indicatorlight enters
constant bright condition, indicates already distinguishesfinished, this
time carries onplay operation andso on. 3. In the market,the digital
card type arevery many,please uses standardproduct of thestandard
factory , meetsreads takes difficultor reads speed limits, please replaces
the digital card.
TV/AV
To start the media play
1.Press the TV/AV button on the remote control to enter the menu
option. Press the CH+/- buttons to select USB, and then press VOL+
button to confirm.
2.After entering the stream media player, press
to select desired options.
buttons
3. Press the
desired option.
button to enter
AAA Multimedia Player
CH+
MENU
CH-
4. Before watching TV program, you
must return the main menu. Repeat
the step 1 to select the TV option, and
then press VOL+ button to confirm.
Card
USB
File copy
SETUP
VOL-
VOL+
Remove USB
Press ENTER key to play this devices
TIP: If thereare no operationone minute later, the TVwill enter the
saver automatically,at the time, press any buttonof USB systemto
exit the savermenu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
To operate the menu
To operate the menu
1. Press the or
button to
AAA Multimedia Player
select the item with up or down.
Card
USB
File copy
SETUP
Remove USB
Press ENTER key to play this devices
2.Press the or button to select the desired item of
sub-menu with left or right.
3
enter the sub-menu, to resume the speed of standard.
Press the
button to ensure the desired option, to
4. Press the
slowly. Press the
also.
or
button to operate play quickly or
button to circumrotate the picture
5.Press the button to pause the player, and press
again to resume it.
ZOOM
6.Press the ZOOM button to enlarge the picture, and
buttons to enjoy the detail.
press
or
/
/
CALL/HELP
7.Press the CALL/HELP button to call or exit the menu
display. And press the CALL/HELP button to call or exit
the menu display during operating file copy.
CAL./EXIT
8.Press the CAL./EXIT button to return to previous menu
and stop player, press CAL./EXITbutton repeatedly to
return to main menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Multi-Media Player
To select stream media broadcast system
1.Press the or button to
select "card"or "USB". (The
AAA Multimedia Player
device be inserted and
identified).
Card
USB
2. Press the button to
enter selected option.
File copy
SETUP
Remove USB
Press ENTER key to play this devices
To play picture
1. Press the or button to
select Picture item.
AAA Multimedia Player
Picture
Movie
2. Press the button to enter
the menu of play.
Music
Music and PIC
TIP:
The menu displaying is different
for the files in your input devices.
AAA Multimedia Player
3. Press the or button to
select the desired picture, and
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
then press the
the play menu.
button to enter
4. On the menu of play, press the
or button to select the speed
of play.(Normal, slow or fast).
Play
JPEG
0016.JPG
5. Afterdisappear the menuplay,
button to swap
CAL./EXIT
ZOOM
Slideshow speed standard
IMAGE
press the or
the picture ofnext and previous.
Press CAL./EXIT button to return.
To enjoy the picture detail
1. After selecting the picture to play, press the ZOOM
button to select desired scale.
2. Press the CALL/HELP button to exit the display, and
then press the or
the picture detail.
,
or
button to move and enjoy
CALL/HELP
To make the picture overturn
Press the
Press the
button to make overturn 900 with right once.
button to resume the program playing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Multi-Media Player
To enjoy music
1. Press the or button to
select the Music option.
AAA Multimedia Player
Picture
Movie
Music
Music and PIC
2. Press the button to enter
the menu of play.
AAA Multimedia Player
3. Press the or button to
select the desired music, and
The day went away .MP3
then press the
button to play.
Note: the play file menu are
different with your USB device.
4. When playing music, press
the or button to select play
mode, (play mode: standard,
program, Random, Disc
Repeat, Folder Repeat, File
Repeat) and press the
The day you wentaway.MP3
Play mode standard
button to confirm.
01 07 / 04 20
The day went .MP3
Soft .MP3
Soft .MP3
The day went .MP3
Done
CAL./EXIT
5. Press the CAL./EXIT button
to exit the playing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Multi-Media Player
To play Movie
1. Press the or button to
select the Movie option.
AAA Multimedia Player
Picture
Movie
Music
Music and PIC
2. Press the button to enter
the menu of play.
AAA Multimedia Player
E08-8SOBTILES-1
3. Press the or button to
select the desired movie, and
then press the
button to play.
4. On the menu of play, press the
or button to select in turn:
File-Play Back Control-Auto
channel-Play Mode
5. Press the or button to set
speed, press button to resume
to standard mode.
6. Press the or button to
select the next movie or previous.
CAL./EXIT
CALL/HELP
7. Press the CAL./EXIT button
repeatedly to return.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Multi-Media Player
To select the Music and PIC item
1. Press the or button to
select the Music and PIC
option.
AAA Multimedia Player
Picture
Movie
Music
Music and PIC
2. Press the button to enter
the menu of play.
AAA Multimedia Player
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Note: the play file menu are
different with your USB device.
Play
3. Press the or button to
select desired file, and press
the button to confirm it.
JPEG
0016.JPG
MP3
The day you went away .MP3
00 01:43
Play mode standard
IMAGE
(Press the button to cancel).
Repeat step 2 to select more
files, and press the
to enter play menu.
button
TIPS:
On the playing, press the
or button to change the
pictures, press the or button to change the musics.
4. On the menu of play, press the or button to select
the speed of play.(Normal, slow or fast).
TIP:
On the playing, press the button to pause the picture.
CAL./EXIT
5. Press repeatedly CAL./EXIT button to return.
Note:
On the music and picture, the playing music is *.mp3 format.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Copy file function
Copy file function
1. Press the or button to
select the File copy option.
AAA Multimedia Player
Card
USB
File copy
SETUP
Remove USB
Press ENTER key to enter COPY menu
Select source Port:
2. Press the
the copy menu.
button to enter
button to enter
Card
USB
3. Press the
Root
the file menu, and press the
or button to select "Card"
or "USB".
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
CALL/HELP
4. Press theCALL/HELP button
to call themenu, and thenpress
COPY
Root
PASTE
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
the
press the button.
button toselect the file,
/
5. Press the CAL./EXIT button to exit the "Select source
Port:" displaying menu, and then press the
select USB or CARD.
button to
/
6. Press the
the file folder. Press the CALL/HELP button to call the menu,
and select the desired files. Press the button to confirm.
button to enter the CARD or USB, to select
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Player System (Continued)
Set up Functions
To select language
1. Press the or button to
select the Setup option.
AAA Multimedia Player
Card
USB
File copy
SETUP
Remove USB
Press ENTER button to SETUP menu
2. Press the
button to enter
the Setup menu. Press the
button again to enter the
Language option.
AAA Multimedia Player
Languages
Version
3. Press the or button to
select desired language, and
press the
button to confirm.
To display the version
1. Repeat steps 1-2, and then
press the or button to
select version.
AAA Multimedia Player
2. Press the button to
display the version number.
V2.1.04254
Removing USB device
1. Press the or button to
select the Remove USB option.
AAA Multimedia Player
Card
USB
2. Press the
confirm.
button to
File copy
SETUP
Remove USB
Press ENTER key to remove USB devices
3.Remove the memory card/USB device.
4.If to removethe card device, press the CAL./EXIT
button to return to the main menu, and remove the card.
Download from Www.Somanuals.com. All Manuals Search And Download.
External connections
In the following, the methods of connecting the video/audio system and PC for the TV
set will be explained.
Video/Audio Output Connection, VGA Input
To Audio/Video input
PC
VCR Etc.
To VGA input
VGA IN
AV2IN
AV1IN
YUV
AVOUT
VIDEO
AUDIO
Pb(cb)
Pr(cr)
L
L
L
L
R
R
R
R
To Video input
Download from Www.Somanuals.com. All Manuals Search And Download.
External connections (Continued)
In the following, the methods of connecting the video/audio system and other sets for
the TV set will be explained.
Video/Audio Input Connection
Side AV
VCD
To Video Terminal
To Audio-L Terminal
To Audio-R Terminal
To Audio/Video Input
AV2IN
AV1IN
YUV
AVOUT
VIDEO
AUDIO
Pb(cb)
Pr(cr)
L
L
L
L
R
R
R
R
TO AUDIO/VIDEO INPUT
VCR (WITHOUT S-VIDEO TERMINAL)
VCR(S-VIDEO TERMINAL)
DVD
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
Noise
The aerial direction and connection
Picture with snow
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Double or Triple Image
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No colour
No sound
Ensure that the power supply is connected to
the TV setand turned on. Also ensure that the
brightness and contrast are not turned down.
No sound
Adjust colour control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Colour Purity faultwhich can becaused by movingthe
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuum cleaners
near the TVset. Turnthe TV off with themains power
switch for 15minutes. When thepower is turnon again
the TV setwill automatically degaussthe picture. In
server cases leavethe TV setturned off overnight.
Colour Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Design and specifications are subject to change without notice.
[The different specifications of different models]
Dimensions (mm)
Power consumption
M o d e l
D29FA9
D29FA9-A
D29FA9-AK
817
920
W
W
x 616
x 695
H
H
x 515
x 530
D
D
D34FA9
D34FA9-A
D34FA9-AK
[The same specifications of different models]
Color system
PAL,SECAM,AV NTSC 3.58, 4.43
Sound system
Sound output
B/G,D/K,I,M
8W+8W & 10W
Remote controller
Owner's manual
Battery(AA)
X1
X1
X2
Accessories
[Power supply input list]
Country or Area
Power supply input
Saudi Arabia
~160V-250V, 50Hz/60Hz
Mongolia, Moldova, Cyprus, Russia,
Turkmenstan, Ukraine, Latvia, Bulgiria
~150V-250V, 50Hz
Jordan, Oman, UAE, Pakistan, Lebann,
India, Yemen, Kuwait, Bahrain
~160V-250V, 50Hz/60Hz
Indonisia
Philippine
~150V-240V, 50Hz
~150V-240V, 50Hz/60Hz
New Zealand, Australia,Malaysia
Hong Kong, Algeria, Nepal, Turkey
~220V-240V, 50Hz
~220V, 50Hz
The actual voltage and frenquency of the TV set is different for the country or area.
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090506995
Download from Www.Somanuals.com. All Manuals Search And Download.
|