25F3A-T
25T3A-T
COLOUR TV RECEIVER
OWNER'S MANUAL
MAIN FUNCTIONS
SlideCurtain PowerOn/Off Display
218ChannelsPreset
Multiple Picture&SoundModes
On/OffTimer
Child Lock
Soft Change Channel Function
CountTime
ChannelsAppointment
DVDVideoComponentInputTerminals
Please read this manual carefully before operating
the unit, and keep it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
3. Don't place the
TV set in the
sunshine or near
heat source.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Tips for remote operation
!
!The battery life should be about one year
Remove the batteries cover.
undernormaluse.
!
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
! When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the batteries
topreventleakage.
!
Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the
remotecontrol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Keys and Plug-ins
Front panel
Video
Menu
TV/AV
switch
Volume
up/ down
Channel
position up/down
R/L
audio
(Not available)
Signal receiver
Power
switch
Power indicator
Back panel
Video Cb input terminal
Video Y input terminal
Video Cr input terminal
Antenna input socket
Video input terminal
Audio right channelinput terminal
Audio left channelinput terminal
Audio right channeloutput terminal
Video output terminal
S-VIDEO input terminal
Audio left channeloutput terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons and Descriptions
TV and AV Exchange Button
Toexchanger between TVand
other available videoinputs
Mute Button
TV/AV
DISP
SYSTEM
SCAN
Press to conceal the sound of programs.
-/--
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Lock Setting button
Used for settinglock for channel-
searching, channel,AVand clock,etc.
Picture Mode SelectButton
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE sixmodes of picture.
LOCK
P.STD
WATCH
S.STD
Menu Select/Adjust Button
Use this buttonto adjust themenu,
the volume andthe channels, aswell
as to controlthe game.
Chromaic Belt LengthAdjust Button
(not available)
CH+
Program Play-forward Button
Calendar
VOL-
VOL+
MENU
CH-
Game Background SelectButton
BAR Button(not available)
Fire Button(can call the calendar)
HIT
WID
Background Lamp ControlButton
(not available)
Restart Game Button
BACK
PRE
Game Exit Button
Program Play-backward Button
Chromatic Belt Width Adjust Button
(not available)
Sound Mode Select Button
CALENDAR
BAR
MODE
FIRE
RESTART
FIRE
EXIT
There are high,normal and low three
LIGHT
kinds of sound modes.
Stopwatch Button
The stopwatch canwork 1 hourwithout
interruption and whenyou use this
function,do not operateother
function button aswell.
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
Program Scan Button
DC Standby Button
Sleep TimerButton
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1.Connect the power supply wire, then press
power switch button, the red power indicator will
light, in several seconds the picture will appear
Signal receiver
Power
switch
on the screen.
Power indicator
2. If the TV is in the state of standby, press the
button on the remote control.
NOTE
1.You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
Menu
TV/AV
switch
Volume
up/ down
Channel
position up/down
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 9-12).
2.When you do not use the remote control, you can
directly press the the button on the television to call off
the standby status.
3. Press the button on the remote control
to get into the standby state.
DC Standby Button
4. Press the button on the TV set to
completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON,
and there is no signal , game screen protection
works, and ,in15 minutes later, it will change
into standby status.
Direct-digit Choosing Button
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs
The channels amount to 218(0-218).
Viewing TV programs
How to select the TV program
1.Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
the TV will use the first two number as the channel position.
2.Use CH+/- button
Direct-digit Choosing
button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3.Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Digit Select
button
Then, press Back button, you can return to the channels you
were watching just now (as many as four) .
PRE
BACK
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
If tne VOL STORE is set ON, the volume of
the pre-fifty channel will be stored
independently.
Press VOL+ to increase the volume, press
VOL- to decrease the volume.
SYSTEM
VOLUME
If the color or sound of one channel is abnormal
It might be because the color or sound
system has been set improperly.You may
follow the instructionbelow to adjustit.
Press SYSTEM button, and you can see
COLOR AUTO
SOUND DK
the form.
CH+
select adjust
If the color of the picture is abnormal
Press CH+/- button, and move the indicator
to COLOR,
and press VOL+ button to select the proper color(AUTO,PAL,
SECAM,NTSC4.43 and NTSC3.58 will appear alternately).
VOL-
VOL+
MENU
CH-
If the sound is abnormal
Press CH+/- button, and move the indicator
to SOUND, and press VOL+/- button
to select the proper sound (DK and BG will
appear alternately).
COLOR AUTO
SOUND DK
select adjust
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs(coutinued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(abouttwo seconds perchannel).
Program scan and screen display
Program scanning function
1.If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
the television will start scanning
SCAN
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2.If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
Screen display
DISP
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen
and press it again, the screen's top left corner will
display the presenttime( the adjustmentof time please
see Setting the Timer ).If press it for a third time, the
channel number and time will both disappear .
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Automatic search
1. Press MENU button, untill
TUNING appears on the screen.
TUNING
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
CH+
DOWN
VOL-
VOL+
MENU
CH-
2. Press CH+/- button to move
the indicator( )to
AUTO MEMORY.
TUNING
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
3. Press VOL+, then
AUTO MEMORYmode will work.
The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
ASM
VHFL
0
STOP
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
CH+
After searching
VOL-
VOL+
MENU
CH-
Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 7).
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(coutinued)
Manual search
Manual search
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
CH+
2. Press MENU button, until
TUNING
TUNING appears on the screen.
VOL-
VOL+
MENU
CH-
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
3. Press CH- button and move
the indicator( ) to SEARCH.
TUNING
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
Direct-digit Choosing
Button
4. Press VOL+/- button to start
searching.
TUNING
VOL- button is used to search the
lower frquency channel.
VOL+ button is used to search the
higher frequency channel.
Repeat the steps until you find
the channel you need.
POSITION
BAND
SKIP
1
CH+
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
VOL-
VOL+
MENU
CH-
5.When you plan to store
another new channel at a new
place, use CH+/- button and
move the indicator( ) to
POSITON, then press VOL+/-
button to select a channel
number and press CH+/- button
to move to SEARCH, then
repeat the fourth step.
TUNING
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(coutinued)
MFT
MFT(manual fine tune)
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
CH+
VOL-
VOL+
MENU
CH-
1. Press CH+/- button or the
Direct-digit Choosing button
to select a channel directly (take
channel 1 for example).
2. Press MENU button, until
TUNING appears on the screen.
TUNING
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
Direct-digit Choosing
Button
3. Press CH+/- button and move
the indicator( ) to MFT.
TUNING
POSITION
BAND
SKIP
1
CH+
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
VOL-
VOL+
MENU
CH-
4. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(coutinued)
Skip
Skip
After the programs are presetted, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or
Direct-digit Choosing button to
select a channel directly (take
channel 1 for example).
TUNING
POSITION
BAND
SKIP
1
UHF
OFF
UP
2. Press MENU button, until
TUNING appears on the screen.
SEARCH
MFT
AUTO MEMORY
DOWN
Direct-digit Choosing
Button
TUNING
3. Press CH+/- button and move
the indicator( ) to SKIP.
POSITION
BAND
SKIP
1
UHF
OFF
UP
SEARCH
MFT
AUTO MEMORY
DOWN
CH+
4. Press VOL+/- button to set it
ON.
TUNING
VOL-
VOL+
MENU
CH-
POSITION
BAND
SKIP
1
UHF
ON
UP
SEARCH
MFT
AUTO MEMORY
DOWN
5. Press MENU button to close the menu. When you
select channels with CH+/- button, this channel will be
skipped. However, you can also use the Direct-digit Choosing
button on the remote control to select this channel ditectly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
Multiple picture modes
DYNAMIC
How to select the picture mode
You may select the mode you want from the
five preset modes and one individual mode.
STANDARD
P.STD
MILD
Press the P. STD button to select a mode you
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
alternately.
MEMORY
PICTURE MUTE
COLOR MUTE
MODE
DYNAMIC
STANDARD
MILD
PICTURE QUALITY
BRIGHT COLOR
MEDIUM COLOR AND BRIGHTNESS
LOW COLOR AND BRIGHTNESS
SET BY YOURSELF
MEMORY
PICTURE MUTE NO PICTURES
BLACK AND WHITE
COLOR MUTE
If the picture mode is set to PICTURE MUTE or COLOR
MUTE,it will autorenew to MEMORY mode when you
restart your TV set.
Set the parameter of MEMORY
1. Press MENU button, until PICTURE appears on the screen.
CH+
PICTURE
VOL-
VOL+
MENU
CH-
CONTRAST
BRIGHT
COLOR
SHARP
B.B
100
50
50
50
2. Press CH+/- button, move the
indicator( ) to the option you
want to adjust, then press
VOL+/- button to do the
ON
adjustment.Then the parameter will be automatically stored
in MEMORY option.
VOL+
OPTION
VOL-
CONTRAST
BRIGHT
COLOR
STRONG
BRIGHT
THICK
WEAK
DARK
LIGHT
SOFT
SHARP
SHARP
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(coutinued)
Multiple Sound Modes
How to select the sound mode
You can quickly select you most favored
NORMAL VOL
sound mode from the following three
kinds of modes.
S.STD
Press the S.STD button to select the
sound quality that you want.NORMAL
VOL,HIGH VOL and LOW VOL can be
selected in turn(their parameter may
be adjusted due to your need).
HIGH VOL
LOW VOL
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the NORMALVOL,
HIGH VOL or LOW VOL).
1.Press MENU button, until
FUNCTION 1 appears on the
screen.
FUNCTION 1
LANG.
CURTAIN
LOW VOL
ENGLISH
III
00
CH+
NORMAL VOL
HIGH VOL
VOL STORE
00
00
OFF
2.Press CH+/-button, move
the indicator( )to the HIGH
VOL, then pressVOL+/-
button to adjust the parameter
you expect. Withthe same
method, you can adjust the
parameter of theNORMAL
VOL or the LOW VOL.
VOL-
VOL+
MENU
CH-
FUNCTION 1
LANG.
CURTAIN
LOW VOL
ENGLISH
III
00
NORMAL VOL
HIGH VOL
VOL STORE
00
00
OFF
Suppose the LOW VOL is A,
NORMAL VOLis B, HIGH
VOL is C, then that will be:
0
A
B
C 100
When adjusting thethree modes,you shouldpress them in
proper order asHIGH VOL,NORMAL VOL, LOW VOL.
3.Press the S.STD button repeatedly to select the
different sound setting modes.
S.STD
Volume store
When the VOL STORE( as above chart) is set ON, the
sudden change of the volume can be avoided when you
change the channel(only the pre-50channels volume).
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(coutinued)
S.C.C, count and mute
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it is set "ON", the picture will fade in and fade
out when the channel is changed.
CH+
1.Press MENU button, until
FUNCTION 2 appears on the
screen.
FUNCTION 2
SUBMARINE
POS.EX.
S.C.C
COUNT
VOL-
VOL+
MENU
CH-
OFF
0:00
2.Press CH+/-button, move
the indicator( ) to the S.C.C,
then press VOL+/-button to
set it ONor OFF.
How to use the COUNT function
This TV set provides youwith the functionof COUNT,
if you want to know how long your TV set has been
used, you can press MENU button, and find
FUNCTION 2 , then you canknow the timethe TV has
been on(count from0 after 100,000hours).
The time displayed is the total time when you watch the
TV(time of standby status will not be included), the
number cannot be altered through operating by the
remote control oron the TV set.
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meetguests, using themute
function is veryconvenient.
1.Press
button, a sign will
appear at the button left corner
of the screen, and the sound of
the TV set is cutoff.
2.In order to recover the sound, press button again
or press VOL+/-button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
1.Press MENU button, until
TIMER
TIMER appears on the
screen.
OFF TIMER OFF
19:00
ON TIMER
OFF
22:00
0
CH+
POS
CLOCK
APPOINTMENT
1:40
VOL-
VOL+
MENU
CH-
2.Press CH+/-button, move
the indicator( )to OFF
TIMER, then pressVOL+/-
button to set it ONCE ,
EVERY,or OFF.
TIMER
OFF TIMER ONCE
19:00
ON TIMER
OFF
22:00
0
POS
CLOCK
APPOINTMENT
1:40
3.Press CH-button, move
the indicator( )to the next
row. Then, press VOL+/-
button to set the time.
TIMER
OFF TIMER ONCE
19:30
ON TIMER
CH+
OFF
22:00
0
POS
CLOCK
APPOINTMENT
VOL-
VOL+
MENU
CH-
1:40
4.Press CH+/-button, move
the indicator( )to CLOCK,
press VOL+/- button, and you
can set the time(It will be the
standard of the clock of
TIMER
OFF TIMER ONCE
19:30
ON TIMER
OFF
22:00
0
TIMER ON/OFF).
POS
CLOCK
APPOINTMENT
1:40
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (coutinued)
Sleep timer and timer on
Sleep timer
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1.The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
2.Press the
button repeatedly,
the screen will show in turn as the
right form.
Timer on
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby statusand display thepreset program.
1.Press MENU button, until TIMER appears on the
screen.
CH+
2.Press CH+/-button, move
the indicator( )to the ON
TIMER, then pressVOL+/-
button to set it ONCE ,
EVERY or OFF.
TIMER
VOL-
VOL+
MENU
CH-
OFF TIMER EVERY
19:00
ON TIMER
EVERY
22:00
0
POS
CLOCK
APPOINTMENT
3.Press CH-button, move
the indicator( ) to the below.
Then, press VOL+/-button to
set the time.
1:40
4.Press CH+/- button, move
the indicator( )to
CH+
TIMER
POS 0, pressVOL+/-
button to set the channel
with which the TV is turned
on(take 5 forexample).
OFF TIMER EVERY
19:00
VOL-
VOL+
MENU
CH-
ON TIMER
EVERY
22:00
5
POS
CLOCK
APPOINTMENT
1:40
5.Press CH+/-button, move
the indicator( )to CLOCK,
press VOL+/- button, and you can set the time(same as
TIMER OFF and it will be the standard of the clock of
TIMER ON/OFF).
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (coutinued)
The channels appointment function can help you conveniently preset as many
as six programs at a time. At the preset time, the TV set will automatically
change to thepreconcerted channel. Iftwo or moreprograms are setin a same
time, the last channel number will be selected.
Channels appointment
Channels appointment
1.Press MENU button, until
TIMER appears on the
TIMER
screen.
OFF TIMER EVERY
19:00
CH+
ON TIMER
EVERY
22:00
0
2.Press CH+/-button, move
the indicator( )to CLOCK,
press VOL+/- button, and you
can set the time(same as
TIMER OFF and it will be the
standard of theclock ofAPPOINTMENT).
POS
CLOCK
APPOINTMENT
VOL-
VOL+
MENU
CH-
1:40
APPOITMENT
POS
100
000
000
000
000
000
TIME
OFF
OFF
OFF
OFF
OFF
OFF
3.Press CH+/-button, move
the indicator( )to
APPOINTMENT, then press
VOL+ button to enter the
sub-menu.
4.Press VOL+/- button to set
the channel number you want
(e.g. 100).
APPOITMENT
CH+
POS
100
000
000
000
000
000
TIME
OFF
OFF
OFF
OFF
OFF
OFF
5.Press CH- button to enter
the TIME item.Press VOL+/-
button to set the time.
VOL-
VOL+
MENU
CH-
Repeatedly press VOL+/-button,
the time changeswith a rateof
one minute;
Press the buttonwithout
releasing, the timechanges with
a rate often minutes.
APPOITMENT
POS
100
000
000
000
000
000
TIME
12:58
OFF
OFF
OFF
OFF
OFF
6.Press the CH- button, and
follow the instructions of step
4 and 5, you can do the setting
of the next channel.
DISP
7.Press DISP button to exit
the TIMER menu.
At the presettime, the TV set willautomatically change
to the preconcertedchannel;
This function is available onlywhen the TV set ison, and
it cannot beused in thestatus of standbyor power off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function
Language and screen protection
Language and screen protection
How to select the language on the screen
1.Press MENU button, until
FUNCTION 1 appears on the
screen.
LANG.
ENGLISH
CURTAIN
LOW VOL
CH+
III
00
NORMAL VOL
HIGH VOL
VOL STORE
00
00
OFF
VOL-
VOL+
MENU
CH-
2.Press CH+/-button, move
the indicator( )to LANG., thenpress VOL+button to
select the language and the menu on the screen will
be displayed withthe language youselect.
How to activate the function of screen protection
If no signal has been received
by the TV set,when theB.B
function is set ON, the screen
will change into the form on
the right shows( game
CH+
background ) .
VOL-
VOL+
MENU
CH-
Press MENU button, until
PICTURE
PICTURE appears on the
screen. Then press CH-
button to move the indicator
( ) to B.B, and press
VOL+/- button toset it ON.
CONTRAST
BRIGHT
COLOR
SHARP
B.B
100
50
50
50
ON
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
Curtain function and calendar display
How to use the Curtain function
This TV set provides three types of Curtain function
for you toselect.
1.Press the MENU button, until the FUNCTION 1
appears on the screen.
CH+
VOL-
VOL+
MENU
CH-
2.Press CH+/-, and move the
indicator( ) to CURTAIN,
then press VOL+ to select
from I,II and III.
I: curtain
II : fade in and fade out
III: mixed I and II
FUNCTION 1
LANG.
CURTAIN
LOW VOL
ENGLISH
III
00
00
00
NORMAL VOL
HIGH VOL
VOL STORE
OFF
How to use the CALEDAR function
This TV set has been designed to store the calendar
from the year 1901 to 2050.
CALENDAR
1.Press the CALENDAR
OCT 2002
button and then the
calendar will appear on
the screen(Press the
SU
MO
TU
WE TH
FR
SA
CALENDAR button again
to conceal the display).
YEAR
MONTH
CH+
2.Press CH+/- button to adjust the YEAR,press VOL+/-
button to adjust the MONTH.
VOL-
VOL+
MENU
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange
Channel Exchange
for example, to change between channel1 and 9
1.Press MENU button, until
FUNCTION 2 appears on the
screen.
FUNCTION 2
CH+
SUBMARINE
POS.EX.
S.C.C
COUNT
OFF
0:00
VOL-
VOL+
MENU
CH-
2.Press CH+/-button, move
the indicator( )to POS.EX.,
Then press VOL+button to
enter the sub-menu.
POS.EX.
EX.POS1
EX.POS2
EXCHANGE
RETURN
1
1
?
The number shown in
EX.POS1 and EX.POS2is the
number of thepresent channel.
3.Press CH+/- button, move
the indicator( ) to EX.POS2,
then press VOL+ button to set
the channel number to 9.
POS.EX.
EX.POS1
EX.POS2
EXCHANGE
RETURN
1
9
?
Direct-digit Choosing
Button
CH+
VOL-
VOL+
MENU
CH-
4.Press CH+/- button, move
the indicator( ) to
EXCHANGE, then press VOL+
button to confirm.Then the
programs of the two channel
will be exchanged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protectyour TV set.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
LOCK
LOCK OR UNLOCK
PASSWORD ----
1.Press LOCK button, the
screen will showas the form
on the right.
CH+
2.Press the 0 buttonfour times,
LOCK OR UNLOCK
and enter the menu of LOCK
CHANGE PASS.
VOL-
VOL+
MENU
CH-
setting. Press CH+/- button
and move theindicator( ) to
CHANGE PASS. , and press
VOL+ button to enter the
sub-menu of change
SEARCH LOCK OFF
POS LOCK
AV LOCK
ON
OFF
ON
TIMER LOCK
CHILD LOCK
ALL CLEAR
OFF
OFF
password.
3. Press the Direct-digit
Choosing button and input a
four-digits password.
CHANGE PASS.
NEW PASS.
----
4. After inputting the new
password, return to the
original status as shown on
the right form, then, you can
input the newpassword to
enter the menu of LOCK
setting.
LOCK OR UNLOCK
PASSWORD ----
Direct-digit Choosing
Button
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are SEARCH LOCK,POS LOCK,AV LOCK,
TIMER LOCK and CHILD LOCK five lock setting,you
can set it due to your need.
LOCK
LOCK OR UNLOCK
PASSWORD
1.Press the LOCK button, the
screen will show as the form
on the right.
----
2.Press the Direct-digit
Choosing button 0 for four
times( or inputthe password
you set), and enter the menu
of LOCK.
LOCK OR UNLOCK
CHANGE PASS.
SEARCH LOCK OFF
POS LOCK
AV LOCK
TIMER LOCK
CHILD LOCK
ALL CLEAR
ON
OFF
ON
OFF
OFF
3.Press CH+/-button, move
the indicator( )to
SEARCH LOCK, thenpress
VOL+ button to set it ON or
OFF.
Direct-digit Choosing
Button
LOCK OR UNLOCK
CHANGE PASS.
SEARCH LOCK
CHANNEL LOCK ON
ON
AV LOCK
OFF
ON
TIMER LOCK
CHILD LOCK
ALL CLEAR
OFF
OFF
CH+
Note:
1.When theCHANNEL or AV LOCK isset ON,
the channel orav cannot beused, hence the
screen will changeinto black andindicate that
it has beenlocked. The TV set will be inthe
state of mute.
VOL-
VOL+
MENU
CH-
2.When theCHILD LOCK isset ON, ifthe buttons
on the TV are pressed, it will indicatethat the TV
set is inthe status ofCHILD LOCK, andthe
buttons won't work.
3.When theSEARCH LOCK orthe TIMER LOCK
is set ON, if you wantto enter theTUNING or
TIMER menu,you willhave to typethe password.
Download from Www.Somanuals.com. All Manuals Search And Download.
Game
This TV set provides you with the SUBMARINE game, after entering the game,
except the buttons that are appointed in the game( for example, the game button,
VOL+/-and CH+/-, etc.)and the DC Standy button, the other buttons cannot be
used.
Game control buttons and method of playing the game
Game control buttons
Fire button
FIRE
CH+
To shoot also use
the MENU button
MODE
Used to turn
up or down
VOL-
VOL+
MENU
CH-
To select the background
when playing game
RESTART
EXIT
To restartthe game
To exit game
Used to turn left or right
Method of playing the game
1.Press MENU button until FUNCTION2 appears on
the screen.Press the CH+/- buttons to select the
SUBMARINE item. Then press VOL+ button to start the
game.
2.On the screen, the submarine figures in yellow is
operated by you. Press CH+/- and VOL+/- buttons to
move the submarine up, down, left or right to charge the
position and avoid the attacks from submarines (in blue,green and purple) of
enemy. Press MENU or FIRE button on the remote control to fire. You will get a
mark of 100 when you destroy a enemy submarine or a shell.Specially,when you
shoot down a red submarine appears on the top row,you will get a mark of 1000!
Scores will be filed if the submarine of enemy is destroyed.
3.You can press the RESTART button to restart the
game when it is GAME OVER or during the process of
the game.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Additional Equipments
Connecting additional equipments
You can connect the DVD,VCR and stereo system to theAV output to enjoy a
higher quality of picture and sound effect.
Signal flow
White (Audio leftchannel)
Red (Cr and audio rightchannel)
Blue (Cb)
Green (Y)
Yellow (Video)
DVD, VCD or otherunits
Video output
Audio output
Laser DVD withoutput terminal
DVD, VCD or otherunits
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling service personnel, please check the following chart for a
possible cause to the trouble you are experiencing.
Symptom
Check these things
TV is not
turned on
Be sure the power cord is plugged in.
The MUTE function may be used.
Adjust the volume of the TV set.
Goodpicture,
nosound
The contrast, color and tint may be incorrectly adjusted.
If you change the direction of the TV while the TV is on, the picture
may suffer from color shading. If so, turn off the TV and allow about
30 minutes to cool, then turn on the TV again.
Poor color / tint,
good sound
The broadcast signal may be jammed by other electrical sources such
as cars, motorcycles, electric trains, high tension lines, neon signs, hair
dryers.
Spots appear
on the screen
The broadcast signal may be jammed by other TV receivers, personal
computers, andTVgames, aswellasinterferencefromradiostations.
Lines appear
on the screen
Interference may be due to broadcast waves reflected from mountains
or buildings.
Check if the direction of the antenna is changed.
Double images
or ghosts
The antenna may be disconnected or falling out.
Check if the direction of the antenna is changed.
Snowy picture or
black screen
The batteries in the remote control may be exhausted.
The batteries may be improperly installed.
Check if there are obstacles between the remote control and the
remote (infrared ray) receiver.
Check if there is strong light interference around the remote (infrared)
receiver.
Check if the main power is ON.
Remotecontrol
doesnotwork
Thefollowingconditionsarenottroubles
Clacking noise inside
the receiver
It may result from the expansion of the shell caused by a temperature
change. This will not affect the picture and sound quality.
Unevencolourina
certainportionofthe
screen
If the picture is too bright, this may occur according to the nature of
the pictures. Reduce the contrast, it may resume to normal.
CAUTION
In case of problems, have your TV serviced by qualified personnel.Never
attempt to service the set yourself since opening the cabinet may expose
you to dangerous voltage or other hazards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
M o d e l
Colour system
Sound system
Picture tube
PAL SECAM AV NTSC3.58 NTSC4.43
BG DK
25"colour picture tube(the viewable dimesion is 59cm)
Sound output power
5W+5W 7% THD
Power requirements
Power consumption
Dimension
160-250V
120W
50/60Hz
645 Width x532 Depth x540 Height
mm
Remote control
Owner's manual
Battery(AA)
X1
X2
X2
Accessories
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|