Pharmaceutical Refrigerator
Operation Manual
HYC-940/HYC-580
Read the Operation Manual carefully before using your appliance.
Keep the Operation Manual in a safe place.
Appearance, color and layout of the door may vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product
Pharmaceutical refrigerator
Model
HYC-940
940L
HYC-580
580L
Volume
External panel
Sprayed steel sheet
Internal panel
Sprayed steel sheet
Insulation
Styrene polyurethane foam (Freon-free)
Rack
6
Air circulation
Sealed
6
Cooling
Compressor
Condenser
Finned pipes
Evaporator
Rrfrigerant
Defrosting
Finned pipes
R134a
Automatic
Thermostat
Over-temp warning
Low-temp warning
Door warning
Spare storage parts
Lamp
Electronic control system
Indicator blinks for buzzer and remote warning
Indicator blinks, without deferred buzzer alarm
Door warning indicator on, and buzzer signal 10 minute later
Permanent static storage
Lamp, 15Wx2
Without
Lamp, 15Wx1
Temp recorder
Accessories
Key: 1 set; Recording paper: 1 box; Shelf restrainer Screw: 4
Operation manual: 1; Plastic bag: 1; 9V Battery: 4
Net weight
250kg
178kg
Rechargeable battery
UN7.0-8(8V7.0AH)
LWC
930W
420W
2~8
.
YZB/LU 0028-2004
LYGX (Z) No.: 2580088
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2~8
.
2~8
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Control
pannel
Light
switch
Door lock
Inner light
Rack
Casters
HYC-940 Diagram
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4.Rack
There are 6 racks inside.
5.Inner light
Download from Www.Somanuals.com. All Manuals Search And Download.
8
10 min later
10 min
Download from Www.Somanuals.com. All Manuals Search And Download.
2~8
.
8
Temperature adjusting:
Press and hold both SENSOR SELECT button and CALIB CANCEL button for more than 3s until
original setting starts flashing to indicate that it enters temperature setting mode. With each press
of CALIB CANCEL button, temperature setting increases 0.1 until reaching upper limit, which
is defaulted as 8 . If press again, it returns to lower limit, which is defaulted as 2 . It repeats the
above cycle. When it reaches your desired temperature, if you don't press the button within 5s,
the temperature setting will be saved and it automatically quits the temperature setting mode (the
temperature setting range programmed at factory is 2 - 8 ). The display returns to display inside
sensor temperature or average temperature before setting is made (not flashing).
in side
Download from Www.Somanuals.com. All Manuals Search And Download.
|