Contents
Contents
COMMON INTERFACE ........................................ 13
Safety Warnings
WELCOME ............................................................. 2
IMPORTANT INFORMATION ................................ 2
2
Software Update function ...............................................13
Operation...............................................................................14
USING YOUR TV.................................................. 14
How to select the TV program........................................14
HOW to adjust volume......................................................14
CH.LIST function ..................................................................15
ADJUSTING PICTURE SETTINGS ....................... 15
Changing the Picture Setting .........................................15
ADJUSTING SOUND SETTINGS ......................... 15
About your LCD TV
GET TO KNOW YOUR TV....................................... 5
Front control panel............................................................... 5
Rear Terminals Control ........................................................ 5
GET TO KNOW YOUR TV WITH DVD .................... 6
5
Changing the Sound Setting ..........................................15
FUNCTION SETTINGS......................................... 16
Front control panel............................................................... 6
Rear Terminals Control ........................................................ 6
GET TO KNOW YOUR REMOTE CONTROL ........... 7
TIME SETTINGS .................................................. 17
LOCK MENU SETTING ........................................ 19
SHORTCUT MENU DISPLAY ............................... 20
CONNECTING YOUR TV........................................ 8
ANTENNA CONNECTION .................................................... 8
IMPROVE YOUR SIGNAL ...................................................... 8
CONNECT YOUR PC TO THE TV ......................................... 8
CONNECT A DVD PLAYER TO YOUR TV .......................... 8
CONNECT A DVD PLAYER OR VCR TO YOUR TV .......... 8
Connection Option 1 ........................................................... 8
Connection Option 2 ........................................................... 8
SCART INPUT........................................................................... 8
HDMI INPUT............................................................................. 9
MOUNT YOUR TV ONTO THE WALL................................. 9
PREPARATION OF YOUR REMOTE CONTROL...... 9
Using the features
22
Teletext functions.............................................. 22
Teletext....................................................................................22
USB MODE.......................................................... 23
TO USE THE USB DEVICE ...................................................23
When connecting/removing the USB device ...........23
Operating the USB device................................................24
Playing a Picture ..................................................................24
Playing Music........................................................................24
Playing a Movie....................................................................25
Text...........................................................................................25
Using External USB Disk For Recording........... 25
TIME SHIFT.............................................................................26
RECORDING...........................................................................26
USING YOUR DVD PLAYER
(certain models only) ........................................ 27
ADDITIONAL DVD FUNCTIONS......................... 28
BATTERY INSTALLATION...................................................... 9
BATTERY CAUTION................................................................ 9
Getting Started
9
Setting up............................................................. 9
LOCATION................................................................................. 9
CONNECTION.......................................................................... 9
SWITCHING YOUR TV ON ..................................................10
TUNING YOUR TV ............................................... 10
SWITCHING TO AN EXTERNAL SOURCE OTHER
THAT TV...................................................................................10
AUTO SEARCH.......................................................................10
DIGITAL MANUAL SEARCH...............................................10
Analog Manual Search ......................................................11
Channel Edit..........................................................................11
RENAME..................................................................................12
MOVE.......................................................................................12
Setting favourite channel.................................................12
SKIP...........................................................................................12
GUIDE (Electronic Program Guide) ...............................12
Reference Sections
TROUBLESHOOTING.......................................... 29
Specification ...................................................... 29
29
EN-1 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warningss
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Do not locate the product close to water
or oil, which may cause fire hazards.
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
The product must be placed on a solid and
stable surface to avoid collapse.
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
EN-3 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warnings
Don‘t use or store inflammable materials
near the product to avoid explosion or fire
hazards.
Don’t place the product in a humid area to
avoid fire hazards.
Never touch the plug when your hand is wet
as this might cause electric shocks.
The antenna of the product should be away
from electric cable to avoid
electric shocks.
Always make sure that the televisionis well
plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water
from flowing down
along the cable into
the television.
Unplug the television, use soft fabric, never
chemicals, if you are going to make
cleaning of the product.
Make sure that no
The plug and electric cable must be kept
clean to avoid electric
shocks or fire
hazards.
water drops in the
product.
Disconnect the television from power supply
to avoid electric shocks or fire
hazards in a long
Disconnect the television from power supply
and antenna when there is a
rainstorm or thunderstorm
to avoid electric shocks
vocation.
or fire hazards.
Digital LCD Television Instruction Manual EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
Installing the stand
Only for LED19/22T3
1. Put the small piece out of the base stand.
2. Position the column with the base stand.
3. Push the LCD TV onto the base.ˈRotate the machine about 15 degrees according
to the arrow on the base stand .
4. Put the small piece in the base, also can use a screw.
EN-5 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
Installing the Stand
Only for LED40T3
1.Carefully place the TV screen side down on a table. We suggest that you place the
wrapping material fromthe TV package on thetable top toprotect the screen from
damage.
2.Position the stand with the bottomof the TV as shown below.
.
3.Push the stand onto the TVDŽ
4.Attach the screw from the bottom of the stand to the TV.
Digital LCD Television Instruction Manual EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
About your LCD/LED LCD TV
GET TO KNOW YOUR TV
Only 19"/22" LCD Model
Front control panel
"ꢖꢃꢎꢅꢁꢈꢈꢆꢂꢃꢗꢌ ꢈꢐꢄꢌꢃꢕꢆꢂꢆꢎꢄꢃꢄꢅꢆꢃꢒꢄꢆꢏꢃꢒꢈꢃꢄꢅꢆꢃ
ꢏꢆꢈꢊ
"ꢖꢃꢎꢅꢁꢈꢈꢆꢂꢃꢊꢉꢐꢄꢌꢃꢕꢆꢂꢆꢎꢄꢃꢄꢅꢆꢃꢒꢄꢆꢏꢃꢒꢈꢃꢄꢅꢆꢃꢏꢆꢈꢊ
Standby switch
SOURCE
MENU
1
2
3
4
CH-
5
ꢀꢁꢂꢂꢃꢄꢅꢆꢃꢇꢈꢉꢊꢄꢃꢋꢌꢊꢍꢎꢆꢃꢏꢆꢈꢊꢐꢀꢌꢈ!ꢍꢏꢃꢑꢊꢄꢄꢌꢈꢃ
ꢅꢆꢈꢃꢌꢉꢆꢍꢁꢄꢒꢈꢓꢃꢏꢆꢈꢊꢔ
ꢍꢆꢕꢕꢃꢄꢌꢃꢕꢆꢂꢆꢎꢄꢃꢄꢅꢆꢃꢏꢁꢒꢈꢃꢏꢆꢈꢊ
ꢖꢌꢂꢊꢏꢆꢃꢗꢌ ꢈꢐꢘꢆꢙꢄꢃꢌꢍꢒꢆꢈꢄꢁꢄꢒꢌꢈꢃꢄꢌꢃꢁꢗꢚꢊꢕꢄꢃꢄꢅꢆꢃ
ꢒꢄꢆꢏꢃꢒꢈꢃꢄꢅꢆꢃꢛꢋꢜꢔ
CH+
6
7
Power indicator
Remote Sensor
VOL-
ꢖꢌꢂꢊꢏꢆꢃꢊꢉꢐꢝꢒꢓꢅꢄꢃꢌꢍꢒꢆꢈꢄꢁꢄꢒꢌꢈꢃꢄꢌꢃꢁꢗꢚꢊꢕꢄꢃꢄꢅꢆꢃ
ꢒꢄꢆꢏꢐ ꢍꢆꢕꢕꢃꢄꢌꢃꢆꢈꢄꢆꢍꢔ
VOL+
EN-7 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
Rear Terminals Control
Digital LCD Television Instruction Manual EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
Only 19"/22" LED LCD Model
1
2
3
4
5
6
7
Call the input Source menu/Confirm button
when operating menu.
Press to select the main menu.
Volume down/Left orientation to adjust the item
in the OSD.
CH-
CH+
POWER
TV channel down/to select the item in the menu.
TV channel up/to select the item in the menu.
4
SOURCE
MENU
VOL-
1
2
3
5
6
7
Power indicator
Remote Sensor
Volume up/Right orientation to adjust the item
in the OSD.
VOL+
2
3
4
5
1
DIGITALVOUT
(COAXIAL)
HDMI IN
USB
DC IN
PC IN
PC/DVI AUDIO IN
Y
Pb
Pr
L-AUDIO-R
11
6
7
VIDEO
L-AUDIO-R
8
10
9
DC IN
EARPHONE
USB
Digital output
HDMI IN
PC IN
input
PC/DCI AUDIO IN input
1
2
3
4
5
6
7
8
9
>
A
output
input
input
input
input
TV SCART
AUDIO IN
AV IN
input
input
input
input
COMPONENT IN
EN-9 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
Only 40" LED LCD Model
SOURCE
ꢁ
MENU
ꢂ
ꢃ
ꢄ
VOL
ꢅ
ꢆ
CH
ꢇ
Toggles between all the available input
CH+/-
POWER
Press to change channels.
Press to turn the TV on and off.
4
5
SOURCE
1
sources
Press to see an on-screen menu of your TV’s
features.
Press to increase or decrease the volume .
MENU
2
3
VOL+/-
ꢈ
ꢉ
ꢁꢊ
ꢁꢁ
L
R
Y
P
b
Pr
PC
PC/DVI AUDIO
PC IN
AUDIO
COMPONENT IN
SCART
HDMI
3
IN
HDMI
2
IN
ꢁꢂ
ꢁꢃ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
SCART
Component
Component Audio input
PC
PC/DVI AUDIO
HDMI3 IN
HDMI2 IN
input
input
Common Interface
Earphone
ANTENNA
Optical
USB
HDMI1 IN
1
8
9
0
A
B
C
2
3
4
5
6
7
input
output
input
input
input
input
input
Digital LCD Television Instruction Manual EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
GET TO KNOW YOUR REMOTE CONTROL
When using the remote control, aim it towards the remote sensor on the TV.
Stand By
DVD Menu / REC
DVD open / close
Picture Mode
Sound Mode
Call Screen Display
Sleep button
DTV Audio / NICAM / DVD Audio
Aspect Ratio Control button
Channel list button
Subtitle button
Program Number Channel selection
Source Exchange
1
2
3
4
5
6
7
8
9
0
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
`
Q.VIEW / Swap Channel
V+/V-: Volume selection
P+/P-: Channel selection
Mute
Menu button
GUIDE button (only for DTV)
Favourite list button
OK button
Cursor Mover button
Back button (only for USB)
Exit Screen Display
REPEAT (only for DVD, USB, REC & Timeshift)/CANCEL button
Zoom (only for DVD & USB)/Teletext index (only for TV) / REC index
Play / Pause button (only for DVD & USB) / Timeshift
Stop (only for DVD, USB, REC & Timeshift)
Fast Reverse (only for DVD, USB, REC & Timeshift)
Fast Forward (only for DVD, USB, REC & Timeshift)
Previous (only for DVD, USB, REC & Timeshift)
Next (only for DVD, USB, REC & Timeshift)
DVD Set up / Text
DVD Title / Teletext Mix
DVD Search / Teletext Subcode
DVD 10+ / Teletext Hold
DVD Program / Teletext Reveal
DVD A-B Repeat / Teletext Size
DVD Call / Teletext Mode
DVD Angle/Teletext Time
Note
O RED button, GREEN button, BLUE
button and YELLOW button are fast
text button in analog signal. Function
button in DVBT (just reference the
OSD)
EN-11 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV
Turn on the DVD player and insert a DVD.
A
B
C
CONNECTING YOUR
TV
Press the button to select .
Refer to the DVD player user guide for operating
instructions.
ANTENNA CONNECTION
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
DVD
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
CONNECT A DVD PLAYER OR VCR TO
YOUR TV
CONNECT YOUR PC TO THE TV
There are two ways in which you can connect a DVD
player or VCR to your TV. Make sure that both the TV and
DVD player or VCR are switched off before you connect
them.
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
A
Read your computer user guide and check it has a
VGA connector.
Connection Option 1
B
C
Turn the power off on your TV and PC.
A
Connect the audio and S-VIDEO cables from the VCR
output jacks to the TV input jacks.
Connect a D type 15-pin VGA interface cable to the
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
B
Insert a video tape into the VCR and press PLAY on
the VCR.
C
D
Turn on the power of the TV first, then the VCR.
Press the SOURCE button on the TV to set the video
input mode to S-VIDEO.
D
E
Turn on the power of the TV firstly and then the PC.
Press the button on the TV or TV remote control to
set the video input mode to VGA.
Connection Option 2
F
Once the image shows, if there is noise present,
change the VGA mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
A
B
Connect the AV DVD/VCR outputs to the AV IN
socket on your TV.
Press the SOURCE button on the TV to set the video
input mode to AV.
SCART INPUT
CONNECT A DVD PLAYER TO YOUR
TV
A
Connect the scart lead from the external device
(DVD player, Set-top box or games console) to the
TV scart socket.
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, Pb, Pr) IN socket on your TV.
Digital LCD Television Instruction Manual EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LCD TV / Getting Started
B
Press the SOURCE button to select SCART mode.
Press the PLAY button on the external device.
C
Close the cover of the battery compartment.
C
HDMI INPUT
A
Connect the cable from the HDMI device to the TV
HDMI socket.
B
C
Press the SOURCE button to select HDMI mode.
BATTERY CAUTION
Refer to the HDMI device user guide for how to
operate.
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
Do not put the remote control in direct heat or in a damp
place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do not
use rechargeable batteries. If your TV is to be stored for
a period of time, remove the batteries from the remote
control.
PREPARATION OF
YOUR REMOTE
CONTROL
BATTERY INSTALLATION
03 Getting
Started
A
Place the remote control face down, then open the
cover of the battery compartment.
Setting up
LOCATION
B
Install two AAA batteries. (The + and - symbol of the
battery must match with the marks on the remote).
You will need to place your TV near your plug socket (so
the power cable can comfortably reach) and within reach
of your aerial socket or extension lead.
CONNECTION
A
Insert your TV aerial lead into the Antenna input at
the side of the TV.
EN-13 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
B
Insert the batteries into the remote control. Make
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.
SWITCHING YOUR TV ON
A
B
C
Press the STANDBY button on the right side/top of
the TV once. A red flashing light will appear in the
corner of the screen.
B
C
D
Press ꢃꢀ button to select Tuning menu, press ꢂ
button to enter.
Press STANDBY on the remote control. The TV will
turn on and the red light will turn blue. This may take
a few moments.
Press ꢁꢂ button to select Country item.
Press ꢃꢀ button to select you needed.
Press ꢁꢂ button to select Auto Search item, press
OK button to enter.
Press ꢃꢀ button to select the OK option, and press
OK button to start searching.
Press the MENU button, you can choose to skip the
TV /DTV Search or not.
Select your chosen language when prompted from
the list that will appear on screen. Use the ꢀbutton
to scroll to the language you want and press to
confirm.
TUNING YOUR TV
SWITCHING TO AN EXTERNAL
SOURCE OTHER THAN TV
If you have attached a DVD player or similar external
device to the TV, you will need to tell the TV to display
the content from it. Simply press SOURCE which will
bring up the source menu in the left corner of the screen,
use the ꢁ and ꢂ button to highlight the required
source and press OK select.
E
Press EXIT button to stop auto search during
searching.
Note
For details of how to plug in other equipment see GET
TO KNOW YOUR TV on page 5.
O It may take a few moments to complete the Auto
Search.
DIGITAL MANUAL SEARCH
AUTO SEARCH
A
Press MENU button.
A
Press MENU button.
Digital LCD Television Instruction Manual EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
B
C
Press ꢃꢀ button to select Tuning menu, press ꢂ
button to enter.
Press ꢁꢂ button to select Digital Manual Search
item, press ꢀ button to enter.
D
E
Press ꢁꢂ button to select Search item, pressꢀꢄ
button is used to select the higher frequency
channel.
Press ꢃ button is used to select the lower frequency
channel.
D
E
Press ꢃꢀ button to select the Channel.
Press OK button to start searching.
And then select Storage To, pressꢃꢀ button to
select the position number you want the channel
on. Once a channel is located, you can press red
button to save it. Press EXIT button to exit.
Once a channel is located, you can press OK button
to save it.
Press EXIT button to exit.
V Sound System
Press ꢁꢂbutton to select “Sound System”, then
press ꢃꢀ button to select the correct sound system.
Analog Manual Search
V Current CH
Follow the below steps when you need to have a manual
search.
Press ꢃꢀ button to select the channel number to
edit.
A
Press MENU button.
V Storage To
Press ꢃꢀ button to select the program number you
want to storage to.
V Fine tune
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
A
Repeat above steps A-C, then press ꢁꢂbutton to
select the Fine Tune item.
B
Press ꢃꢀ button repeatedly to carry out fine
tune, till the best picture and sound are obtained,
then loosen the button.
B
C
Press ꢃꢀ button to select Tuning menu, pressꢂ
button to enter.
Press ꢁꢂꢄbutton to select Analog Manual Search
item, press ꢀ button to enter.
Channel Edit
Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.
A
Press MENU button.
EN-15 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
B
C
Press ꢁꢂ button to select the number position you
want to remove to, press yellow button to confirm.
You can press the EXIT button to cancel the changes
at anytime.
Setting favourite channel
A
B
C
D
Press ꢁꢂ button to select the channel, press red
button to set your favourite channel.
B
C
Press ꢃꢀ button to select TUNING menu, press ꢂ
button to enter.
You can press the red button to cancel the changes
at anytime.
Press ꢁꢂ button to select CHANNEL EDIT item.
Press ꢀ button to enter the sub-menu. You can
press red, green, yellow or blue button to enter the
menu you need.
Press FAV button on the remote control and
Favourite List will be displayed.
Pressꢁꢂ button to select the channel, and press
OK button to enter.
RENAME
SKIP
A
Press ꢁꢂ button to select the channel, and press
green button to rename.
A
Pressꢁꢂ button to select the channel and press
blue button to skip the current channel.
B
You can press the blue button to cancel the changes
at anytime.
GUIDE (Electronic Program Guide)
Using this function, you can access the DTV program
information.
A
Press MENU button.
B
C
Pressꢃꢀ button to select the number position of
channel name. Press ꢁꢂ button to select number.
You can press the EXIT button to cancel the changes
at anytime.
Note
O The RENAME function is only available in ATV
program.
MOVE
B
Press ꢃꢀ button to select TUNING menu.
Press ꢂbutton to enter.
A
Press ꢁꢂ button to select the channel and press
yellow button to select the position.
Digital LCD Television Instruction Manual EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Pressꢁꢂ button to select the guide item.
C
CI Slot
CAM
Press OK button to enter the submenu, the
electronic program guide is displayed.
You can quickly call up Guide menu by GUIDE
button on the remote control.
Smart Card
Note
O Only DTV mode.
B
C
Turn on the TV and it will display the below message
if the CA module is detected. Wait for few moments
until the card is activated.
COMMON INTERFACE
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.
Press the MENU button to display the Main Menu
and use the ꢁand ꢂ button to highlight the
“Common Interface”line and press the “OK”button.
D
E
F
Detailed information on the CI card in use is
displayed.
Press OK button to access the card menu. Refer to
the module instruction manual for setting details.
When module is removed, the following message
will appear on the screen.
Warning
Software Update function
t
Switch off your TV before any module is inserted in
the Common Interface slot.
t
When you get the updating news from the TV shop’s
web, you can update the operating software using
the Download menu. The data for various units are
transferred consecutively on a special receiving
channel.
t
You need to search the channel with updating code
stream.
A
Insert the CAM correctly, then Smart Card to the CI
slot that is located at the side of the TV.
EN-17 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Press ꢁꢂ button to select the System Update
F
option and use OK button to enter. Then the TV will
restart and search the upgrade information.
Note
O If the upgrade information is received, the TV will
begin to upgrade. Or else, the TV will be back the
DTV source.
G
Load the receiver identification. This process may
also take several minutes. You can press EXIT button
to cancel the download and your TV set will be back
the DTV source.
Note
O You can get information from the TV shop or
internet.
100%
Operation
Press EXIT to cancel download
Updating in progress - Do not turn off the TV
15%
A
Press MENU button.
H
After the download has finished, your TV set will
enter burning state and the indicator light is shining.
The menu 4 of right appears.
The set will be back the DTV source when the update is
completed.
B
Press ꢃꢀ button to select TUNING menu, press ꢂ
button to enter.
USING YOUR TV
C
D
E
Press ꢁꢂ button to select Software Upgrade item.
Press ꢃꢀ button to set it as On. (The default is Off)
How to select the TV program
The Start Upgrade item can be selected
.(The default is grey and can not be selected)
A
Using Program number button Enter the channel
number with the number keypad on the remote
control.
B
Using P+/P- button.
Press the P+/P- button to select a channel number.
13%
Press EXIT to cancel download
HOW to adjust volume
Press V+/V- button on the remote control or the side of
the TV to adjust the volume level.
Digital LCD Television Instruction Manual EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
V Colour
CH.LIST function
This will adjust the saturation level of the colours to
suit your personal preference.
Press CH.LIST button on the remote control will display
Channel List menu, and then press ꢂ button to enter.
Pressꢁꢂ button to select the channel, and then press
OK button to enter.
V Sharpness
This will adjust the sharpness of fine details in the
picture.
V Tint
ADJUSTING PICTURE
SETTINGS
Allows you to select the colour mix (Tint) of the
picture.
Note
O The Tint function is only available in NTSC mode.
Changing the Picture Setting
V Mode
This will select the picture mode. Select Standard/
Mild/User/Vivid according to the program. You can
quickly select the desired mode by P.MODE button on
the remote control.
A
Press MENU button.
V Colour temperature
This will increase or decrease Warm (red) and Cool
(blue) colours to suit personal preferences.
Select Cool to give the white colour a blue tint,
Normal to give the white colour a neutral tint, Warm
to give the white colour a red tint.
V Noise Reduction
Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.
Select Off/Low/Standard/High according to the
image noise.
B
C
Press ꢃꢀ button to select Picture menu, press ꢂ
button to enter.
Press ꢁꢂ button to select the item requires
adjusting.
V Reset
To recover to the default value.
D
E
Pressꢃꢀ button to adjust the selection item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
ADJUSTING SOUND
SETTINGS
V Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
V Brightness
Changing the Sound Setting
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
A
Press MENU button.
EN-19 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
V Audio Languages
B
C
Pressꢃꢀ button to select Sound menu, press ꢂ
button to enter.
Press ꢁꢂ button to select Primary/Secondary item,
and then press ꢃꢀ button to select the languages
you needed.
Press ꢂ button to select Close item, press OK button
to close it.
Press ꢁꢂ button to select the item requires
adjusting.
D
E
Press ꢃꢀ button to adjust the selection item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
V Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
Note
V Mode
This will select the sound mode.
Press ꢃꢀ button to select Standard/Music/
Theater/User according to the program. You can
quickly select the desired mode by S.MODE button
on the remote control.
O The Audio Language function is only available in
DTV mode.
V Reset
To recover to the default menu setting.
V AVL (Automatic volume control)
This will reduces the differences in volume level
among broadcasters.
FUNCTION SETTINGS
A
Press MENU button.
V SRS TS XT
This will control the Woofer output.
Press ꢁꢂ button to select SRS TS XT.
Press ꢃꢀ button to set SRS TS XT as OFF, ON.
V Digital Audio Output
This will control the Digital Audio Output.
Press button to select Digital Audio Output.,
Press button to set Digital Audio Output. as OFF,
PCM,RAW.
V Equalizer
This sound setting can be adjusted to suit your
personal preference.
B
Pressꢃꢀ button to select Sound menu, press ꢂ
button to enter.
Digital LCD Television Instruction Manual EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Note
O The Blue Screen function is only available for
ATV mode.
V Recorder
To recorder the DTV program. Details of Recorder are
described in the page of 25, 26.
V SCART Input
When you use the SCART2 input ,make sure the input
source is AV or S-VIDEO, and set the SCART INPUT
option.
C
D
E
Press ꢁꢂ button to select the item requires adjusting.
Pressꢃꢀ button to adjust the selection item.
V OSD Time Out
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
To set how long you want the menus to appear
on-screen. Each press of ꢃꢀ button repeatedly to
select the number of preset minutes, the Time will be
set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec.
V Display Mode
To set the picture proportion, pressꢃꢀ button to
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by ARC button on
the remote control.
t
4:3 mode
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
t
16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
V OSD Transparency
To set the transparency background of OSD, the
transparency will be set in sequence: Off, 25%, 50%,
75%, 100%.
t
t
Zoom1
V Reset
To recover to the default value.
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom2
TIME SETTINGS
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
V Clock
A
B
Press MENU button.
t
Wide
Press ꢃꢀ button to select Time menu, press ꢂ
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration, at bottom side.
button to enter.
V Blue Screen
This will select the character background colour.
EN-21 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
C
Press ꢁꢂ button to select Clock item, press ꢀ
button to enter setting.
C
Press ꢁꢂ button to select Off Time item, press ꢀ
button to enter setting.
Press ꢁꢂ button to select hour or minute, press
ꢃꢀ button to adjust the value.
Press ꢁꢂ button to select Repeat option, and
then pressꢀbutton to set it on.
Pressꢁꢂ button to select hour or minute, press
ꢃꢀ button to adjust the value.
V Date
A
B
Press MENU button.
When the off time has arrived, the TV set will
enter into standby mode.
Press ꢃꢀ button to select Time menu, press ꢂ
V On Time
button to enter.
A
B
Press MENU button.
Pressꢃꢀ button to select Time menu, press ꢂ
button to enter.
C
Press ꢁꢂ button to select Date item, press ꢀ
button to enter setting.
Pressꢁꢂ button to select the option, and then
press ꢃꢀ button to adjust value.
C
Press ꢁꢂ button to select On Time item, press ꢀ
button to enter setting.
Press ꢁꢂ button to select activate option, and
then pressꢀbutton to set it On.
Press ꢁꢂ button to select hour or minute, press
ꢃꢀ button to adjust the value.
Note
O In DTV mode, because the time information is
from the signal, the Clock and Date are not able
to be changed.
If you want to change the time, turn off the TV in
ATV mode, then turn on the TV.
When the on time has arrived, the TV set will
switch on automatically.
V Off Time
V Sleep
A
B
Press MENU button.
The sleep timer automatically shuts off the TV after a
preset time (from 5 to 240 minutes).
Press ꢃꢀ button to select Time menu, press ꢂ
button to enter.
Digital LCD Television Instruction Manual EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
button to enter the sub-menu, and you will be required
to enter the password. The initial password of the
television is 0000. If you forget your password, you can
always input 9443 to regain control.
A
Press the MENU button and then use ꢃꢀ button
to select the Time menu.
B
C
Press the ꢂ button and then use ꢁꢂ button to
select the Sleep.
V CHANGE PASSWORD
Press the ꢃꢀ button and then use ꢃꢀ button
to select the number of minutes. Select Off, 5Min,
10Min, 15Min, 30Min, 45Min, 60Min, 90Min,
120Min, 180Min, 240Min.
A
Press ꢁꢂ button to select Change Password
item. Press ꢀbutton to enter the submenu.
D
When you are satisfied with your choice, press
MENU button to return to the previous menu or
press the EXIT button to return to TV viewing.
And the time begins to count down from the
number of minutes selected.
V Time Zone
A
Press MENU button.
B
When you have inputted the four digits you will
be prompted to enter it again.
Your new password will then be automatically
saved.
V CHILD LOCK
Press ꢁꢂꢄbutton to select Child Lock.
Press ꢃꢀ button to set On or Off mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of MENU button.
5 seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu, set
Child Lock On or Off.
B
Press ꢃꢀbutton to select Time menu, press ꢂ
button to enter.
C
D
E
Press ꢁꢂꢄbutton to select Time Zone item.
Press ꢃꢀ button to select the correct time zone.
Press MENU button to save and exit.
V Tuning Lock
Press ꢁꢂ to select Tuner Lock and ꢃꢀ to set On/Off.
(To set On, some operation such as search will be not
available. When enter the Tuning menu, Tuner Lock
will be on the screen. If you want to operate Tuning
menu, you need to enter the Lock menu to set Tuner
Lock Off or operate unlock.)
LOCK MENU SETTING
Using this function can control the tuner, program,
source volume and so on. Pressing MENU on the remote
control, press ꢃꢀ button to select Lock menu, press ꢂ
EN-23 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
V Channel NO.
SHORTCUT MENU
Channel NO. is opted for setting up preset channel.
Press ꢁꢂ button to select preset Channel. Press ꢃꢀ
button to select channel number.
DISPLAY
V Source set
V Subtitle Function
Channel set is opted for setting up start source.
Press ꢃꢀ button to select Off, DTV, TV, SCART, ,
S-Video, Component, PC, HDMI, USB in turn. DVD is
available for some model.
A
Press SUBTITLE button on the remote control will
display Subtitle languages menu, press ꢂ button
to enter.
V Source Lock
Source Lock will control the On or Off of hinder
external input modes.
Press ꢃꢀ button to set as on or off.
When the source lock is set as on, TV source will
display, at this time, when press SOURCE button,
the TV can switch to corresponding source and will
display the Source is locked.
B
Press ꢁꢂ button to select the item and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
Note
O Press SUBTITLE button on the remote, it will
display subtitle languages menu only in the DTV
mode.
V CH.LIST Function
A
Press CH.LIST button on the remote control, will
display Channel List menu.
V Max Volume
Press ꢁꢂ button to select Max Volume. Press ꢃꢀ
button for adjustment between 0-100. If a certain
Value is set, when volume is being adjusted, the
sound value can not exceed maximum volume value.
If current volume is over Max Volume, when lock set
menu is set, current volume will become set maximum
volume, if current volume is below maximum volume,
customer set volume will stay unchanged.
V Initial Volume
The TV will remember it after your setting, that will be
the volume when turn on the TV next time.
B
Press ꢁꢂ button to select the channel and press
OK button to enter. You can press the EXIT button
to cancel the changes at anytime.
V Parental Lock
Press ꢁꢂ button to select parental lock. Press ꢃꢀ
button to select OFF or 4-18 to limit the age of
children who will watch TV.
V GUIDE Function
Press GUIDE button on the remote control, will
display Program Guide menu, press ꢁꢂꢃꢀbutton
to select the program.
V Clear Lock
Press ꢁꢂ button to select Unlock mode. Press ꢃꢀ
button to unlock all set modes, setting all lock options
to off, and the maximum volume returns to 100.
Digital LCD Television Instruction Manual EN-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
You can press the EXIT button to cancel the changes
at anytime.
Note
O Press AUDIO button on the remote, it will
display Audio Languages menu only in the DTV
mode.
V Eliminate Sound
When you need to pay attention to surrounded
sounds, or there is a telephone calling you
or there are some guests visiting you, the sound
elimination (mute) function is very convenient.
A
Press the MUTE button on the remote control and
“Mute”type face will display on the lower part of
the screen. At this Time, the sound of the TV set is
turned off.
Note
O Available only in the DTV mode.
V FAV Function
Press FAV button on the remote control, will display
B
If you want to recover the sound, press the MUTE
button again or directly press V+ button.
Favourite List menu.
Press ꢁꢂ button to select program and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
V Quick program view
This function enables quick swap to the last watched
program. Press Q.view button, and the TV will be back
to the TV source, expect in the USB and DVD source.
A
Suppose the channel number you used just now
is 8 and the channel number you are using is 18
(as shown in the figure).
V INFO
Press INFO button on the remote control, will display
the current channel information.
You can press the EXIT button to cancel the changes
at anytime.
V AUDIO/I/II
Press AUDIO button on the remote control, will
display Audio Languages menu.
Press ꢁꢂ button to select the desired settings and
press OK button to enter.
You can press the EXIT button to cancel the changes
at anytime.
B
C
If you want to return to the last watched program
channel 8, you can simply press the Q.View button.
If you want to return to channel 18, press the
button again. Use this function, you can easily
change between the channel you are using and
the channel you used last Timer.
EN-25 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
V Mix mode
Using the features
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.
Teletext functions
Teletext is an information system, broadcast by certain
channels, which can be read like a newspaper. It also
provides subtitles for people with hearing difficulties or
those who are unfamiliar with the language in which a
particular program is being broadcast (cable networks,
satellite channels, etc.).
V INDEX
Press the INDEX button to go to the index page of
teletext.
Note
O The teletext buttons could be working even if
there is no teletext signal, but there is no teletext
display.
V Language change
Pressing the
button will change the Teletext
characters between Eastern and Western.
Teletext
V Teletext functions
To select “teletext”press the
V Hold
button on the
Pressing the button will stop the teletext page
automatically updating. This feature is very useful
where there are several teletext pages or data on the
same page number.
handset. To switch off teletext, press the button again.
“Note all menu functions are not available in teletext
mode”. Only a few direct button control functions are
available in teletext mode, they are:
t Volume adjustment
t Mute function
V Size
Pressing the button changes between full screen
top half bottom half full screen. This feature is
very useful as it magnifies the image making the
characters easier to read.
V Page up/down
Use the P+/P- buttons to browse next or previous
page.
V Reveal
Pressing the
V Page number entering
button will reveal hidden text. This
feature is used to reveal information such as answers
to Teletext on-line interactive puzzles.
To select a Teletext page, enter the page number
using the numeric key pad on the remote control,
or use the P+ or P- buttons, or the coloured Fast text
buttons.
Digital LCD Television Instruction Manual EN-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
B
Supported equipment:
V Time
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT32, such
as some USB disks, mobile harddisks, and MP3
player. If USB equipment could not be identified
due to unsupported file system, please format the
equipment to the above-mentioned file system.
While in normal TV mode only, pressing the button
will display the teletext time in the top right hand
corner for a few seconds.
C
To achieve smooth playing, ensure the following:
V Fast text coloured buttons
tꢀ The file code rate should be lower than 300KB/S;
tꢀ Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
tꢀ Use high-speed USB equipment in conformity
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
Fast text automatically displays the four most
commonly used pages that the broadcaster thinks
that you may want to choose next. Press the same
coloured button on the remote control as the
coloured link at the bottom of the teletext page to go
directly to that page.
V Subcode
Pressing the button by entering its 4-digit number
to enter a secondary page.
When connecting/removing the USB
device
A
B
C
Press “SOURCE”on the remote control unit to select
USB option.
Insert USB equipment into corresponding USB
interface 2s after starting the system.
USB MODE
After entering the system menu, press “ꢃ/ꢀ“ on the
remote control unit to select the require USB files,
press “OK”button to confirm the selection and enter
the file list relative to the selection.
Note
O The diagrams in the following section are
schematic and only for your reference. Please see
the actual product if necessary.
D
E
Press“ꢁ/ꢂ“ on the remote control unit to select the
required file, press“OK”button to enter the selected file.
TO USE THE USB DEVICE
To exit the streaming media playing system and
watch a TV program, you must press “BACK”button
to return to the streaming media main menu at first
(to protect equipment), and then press “SOURCE” to
select “TV”to return to the TV mode.
A
Supported file formats:
tꢀ Photo: *.jpg;
tꢀ Music: *.mp3 files;
tꢀ Movie: *.avi files;
tꢀ TEXT: *.txt
Note
Note
Q Under source of USB, when press button MENU,
screen goes black, except when images or movies
are being played.
O Due to the particularity of file cording, some files
may be unable to read.
Q While playing the USB, press “BACK”button
repeatly, the screen picture will return to USB
main interface, and only at this time you can
switch corresponding signal sources by pressing
“SOURCE”again.
EN-27 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
D If you want to pause the picture which is being
Q Please do not unplug the USB device when the
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.
palyed, press the PALY/PAUSE button again.
Press ”ZOOM“ to magnify the picture. When the
picture is enlarged, press “ꢃ/ꢀ“ and “ꢁ/ꢂ“ to
move the picture.
Press “PREV/NEXT“ to select the last or next picture.
Press “ꢁ/ꢂ“ to rotate the picture.
Operating the USB device
Press “STOPꢇ”to stop the picture being played.
A
Press “ꢁ/ꢂ“ to scroll through main menu or
E
To exit playing, just press “BACK”repeatedly.
submenu and select your desired option.
B
C
Press “OK”to confirm your selection.
Note
Press “ꢅ/ꢆ“ to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
O The menu display varies with the photo name and
pixel in your equipment.
D
E
F
Press “PLAY/PAUSE”to play, and press it again to
pause playing.
Playing Music
Press “ZOOM”to magnify pictures; when the picture is
enlarged, press “ꢃ/ꢀ“ and “ꢁ/ꢂ“ to move the picture.
A
After entering USB main interface, press“ꢃ/ꢀ“ to
select “MUSIC”.
Press “STOPꢇ“ to stop playing, or return to the
previous menu, and press “BACK”repeatedly to
return to the main menu.
B
Press ”OK“ to confirm the selection and enter the
music file list.
Note
O You can choose the photos or music in different
files to play together.
Playing a Picture
A
After entering USB main interface, press“ꢃ/ꢀ“ to
select “PHOTO”item.
B
Press ”OK“ to confirm the selection and enter the
picture file list.
C
Press “ꢁ/ꢂ“ and “OK”button to select the music
you want to play, then press “PLAY/PAUSE“ button
to play the music.
Press “ꢅ/ꢆ“ to achieve the REV (fast back) and FWD
(fast forward) of the music being played.
Press “PREV/NEXT “ to select the last or next music.
Press “STOPꢇ“ to stop the music being played,
when the current interface is the music being
played.
D
To return to the main menu, just press “BACK”
repeatedly.
C
Press “ꢁ/ꢂ“ to select the picture you want to play,
press ”OK“ to confirm, and then press “PLAY/PAUSE”
button to play the pictures.
Note
O You can enjoy the music and the picture at the
same time.
Digital LCD Television Instruction Manual EN-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
D
To exit the “Text” mode, just press “BACK”repeatedly.
Playing a Movie
Note
A
Atter entering USB main interface, press“ꢃ/ꢀ“ to
O You can enjoy the music and the text at the same
time.
select “Movie”.
B
Press “OK”to confirm the selection and enter the
movie file list.
Using External USB
Disk For Recording
A
Insert the USB device with FAT32 format into the
USB1 connector. Then, press MENU button.
C
D
Press “ꢁ/ꢂ“ and “OK”button to select the movie
you want to play, and then press “PLAY/PAUSE”
button to play the movie.
Press “ZOOM”to magnify the picture.
Press “PREV/NEXT “ to select the last or next movie.
Press “STOPꢇ“ to stop the movie being played.
To exit playing, just press “BACK”repeatedly.
Note
Text
O Only USB1 is available for recording.
B
C
D
Press ꢃꢀ button to select FUNCTION menu, press
ꢂ button to enter .
A
After entering USB main interface, press “ꢃ/ꢀ“ to
select “Text”.
Press ꢁꢂ button to select Recorder. Press OK
button to enter the submenu.
B
Press “OK” to confirm the selection and enter the
text file list.
Press ꢁꢂ button to Select Disk and press ꢀ or OK
button to enter. Press ꢃꢀ button to select disk if
your device has several disks.
E
Press ꢁꢂ button to select Format and press ꢀ to
enter. Press ꢃꢀ button to select the size you want
to format. Press OK button to format the USB Disk.
C
Press “ꢁ/ꢂ”and “OK”button to select the text you
want to play, and then press “PLAY/PAUSE”button
to play the text.
Press “PREV/NEXT “ to select the last or next text.
EN-29 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
IMPORTANT
Note
t
USB device should be format as FAT32 format by
your PC before insert to the USB connector.
O The system will format the whole device and if your
device size is bigger than 1GB, you can set the size
which is used for time shift.
F
Format may take several minutes and the time is
depending on the memory size. Press ꢃꢀ button
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB. Then, press OK button to save.
TIME SHIFT
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the STOP button.
RECORDING
Note
A
Press D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.
O If you select all the size format for time shift, you
can not do any recording.
G
Waiting for the system checking. And you can see
the speed data after the success checking.
Note
O Only have to format when you use the device for
record for the first time.
O The minimum device size for record is 1GB. Provide
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
B
C
Press STOP button to stop the program recording
being played.
For Playback the recorded program. Press INDEX
O Bit rate:
button to open the recorded list.
t
t
t
Device bit-rate>4.5MB/s REC is safe at HD
stream
Device bit-rate>1.5MB/s REC is safe at SD
stream
Device bit-rate<600KB/s REC is bad for REC
O The system can not work normally if the USB
device have the listing problem below:
t
t
t
The device has bug.
The device has error block.
The device reports the unfaithful size.
Digital LCD Television Instruction Manual EN-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
B
Place the DVD in the disc slot with the DVD label
facing away from you and the screen. The disc slot
will only take standard-sized DVD.
Press ꢁꢂ button to select the content you recorded.
Press the ꢀ button to display the program
information.
C
D
The DVD will automatically load; most begin with
a disc menu.
Use theꢂ,ꢁ,ꢀ and ꢃ buttons to navigate
around the DVD menu to highlight the play
option and then press PLAY/PAUSE.
Press ꢃ button to cancel.
Press OK or PLAY/PAUSE button to play the
program recorded and press STOP button to stop it.
V PAUSING A DVD
A
Press PLAY/PAUSE to pause playback. The sound
will also be muted.
B
Press PLAY/PAUSE to resume normal playback.
V STOPPING A DVD
A
Press the ꢇ button to stop playback of a DVD. The
Note
TV screen will show the DVD start-up logo.
O Changing the channel will not influence the
recording in the same frequency, but will influence
the time shift. When the recorded program is being
played, you can not delete it.
B
Some discs will remember the moment at which
the DVD was stopped, so press PLAY/PAUSE to
recall the moment and continue playback.
O Press the INDEX button repeatedly, the program
will be displayed in the order of program name,
channel name, program time, file name and file
length.
C
Press the ꢇ button twice to stop completely and
clear the memory.
V USING FAST FORWARD OR REWIND
A
To move forward through a disc more quickly,
press the ꢆ button.
USING YOUR DVD
PLAYER
To rewind through the disc, press the ꢅ button.
B
Press the ꢆ or ꢅ button repeatedly to cycle
through the available speeds, which appear in the
top left corner of the screen: 2X, 4X, 8X, 16X, 32X
and normal playback speed.
(certain models only)
C
Press PLAY/PAUSE to resume normal playback.
V SKIP TO THE NEXT OR PREVIOUS SCENE
During playback press the ꢈ button to skip to the
next scene on the disc, or press ꢉ to skip to the
previous one.
V PASSWORD
Parental control can be activated by setting the
Password Mode to On. The default password is 0000.
If you forget the password, you can always input 1369
to regain control.
V PLAYING A DVD
A
Press the SOURCE button on the remote control
to enter DVD mode.
EN-31 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
V SEARCH
V USING THE ZOOM FUNCTION
Press SEARCH and use the numerical keys to enter
the chapter number you wish to go to and press
PLAY/PAUSE.
A
Press the ZOOM button to zoom into the image
on screen. You can press it repeatedly to further
enlarge the picture.
V PROGRAM
B
In zoom mode use the ꢂ, ꢁ, ꢀ and ꢃ buttons to
display a different section of the enlarged picture
on the screen.
During playback press PROGRAM to move directly
to a section or programme on the DVD. Press the
digit buttons to select the programme number that
you want. When finished, move the cursor to select
START. The DVD will jump directly to that section
and begin to play. If you want to cancel this function,
press PROGRAM and move to STOP, then press PLAY/
PAUSE.
V SWITCHING ON SUBTITLES
A
B
Press the SUBTITLE button during playback.
The available languages will appear in the top left
corner of the screen.
Press repeatedly until your desired subtitle
language is shown.
V A-B
Use A-B to set a section of a DVD to repeat. Press A-B
to mark the start point and again to mark the end. The
section will begin to be repeated immediately. Press
A-B to cancel the repetition.
C
Press SUBTITLE repeatedly until SUBTITLE OFF is
shown to switch the subtitles off.
V ANGLE
V USING REPEAT MODE
When enjoying sports, concert or theatre, press
this key to watch same actions in different angles.
(Valid for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles, for example, front, side, whole view
and exterior scene.)
Press REPEAT once to repeat the chapter on a DVD,
twice to repeat the currently playing title or three
times to repeat the whole contents of the disc.
V CHANGING THE CAMERA ANGLE
Some DVD have multiple camera angles for some
or all scenes. Press the ANGLE button to change the
camera angle. Different camera angles may include:
front, side, whole view or exterior.
V D.CALL
When pressing the D.CALL button repeatedly
different OSD indicator will be displayed for different
types of disc DVD, CD etc.
ADDITIONAL DVD
FUNCTIONS
V PLAYING A JPEG CD
A
Insert a JPEG CD in the same way as you would a
DVD or Audio CD, with the label facing away from
you.
V D.MENU
B
C
The CD will load and a menu of the disc’s contents
will appear on screen.
Press this button to return to the previous menu item.
V AUDIO
Use the ꢁ and ꢂ buttons to highlight the
folder and picture you wish to view and press
PLAY/PAUSE. Each image on the disc will show
consecutively, like a slide show.
Many DVD have multiple soundtracks. To change
between them press the AUDIO button. Wait three
seconds before pressing the button again, to cycle
through the options.
D
E
Press PLAY/PAUSE during the slide show to
pause on one image.
V TITLE
Press this button to return to the title menu on some
DVD. Use the ꢂ, ꢁ, ꢀ and ꢃ buttons to navigate
around the menu.
Press the ꢈ or ꢉ button to skip to the next
image or return to the previous one.
Digital LCD Television Instruction Manual EN-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
V PLAYING AN AUDIO CD
Verify if correct channel is
selected.
Adjust the antenna.
No picture in
some channel
A
B
C
Insert a CD in the same way as you would a DVD,
with the label facing away from you.
The CD will load and a menu of the disc’s contents
will appear on screen.
Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
Refer to relative instructions
in the Manual for color
adjustment.
No color for
some channel
program
(black and
white)
Use the ꢂ and ꢁ buttons to highlight the track
you wish to play and press PLAY/PAUSE, or just
press PLAY/PAUSE to listen to the whole CD from
the beginning.
You can stop, pause, fast forward or fast rewind a
CD in the same way as a DVD. You can also use the
REPEAT button to repeat a track, folder album or
the contents of the whole disc. Press repeatedly
to select what you would like to repeat. You can
also use the A-B function to repeat a certain
section of a track or CD.
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.
Spots with
some or all
pictures
Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact
authorized after-sales service
for technical assistance.
Television out
of control
Reference Sections
TROUBLESHOOTING
„ To assist in location of possible faults use the help
Note
guide below:
O If the fault can not be repaired using the above
guide consult with your local authorized service
centre.
Verify if the television is
properly plugged in.
O The TV set must only be repaired by a qualified
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages in side that may cause a fatally or fire.
No picture, no
Verify if the television has a
sound
proper supplied power source.
Verify if electricity is available.
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Blank screen
Restart the television if power
supply is interrupted.
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
No sound
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct.
Refer to user‘s manual for
adjustment.
Poor sound
EN-33 Digital LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Sections
40”
Remote control , AAA battery ×2 , Instruction Manual , Warranty , TV Stand
5XScrews for TV stand(only for 40" model)
Component adapter,Component audio adapter ,SCART adapter (only for 40" model)
Cover button (only for 40" model)
Digital LCD Television Instruction Manual EN-34
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090504932P
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL LCD TELEVISION
TELEVISION NUMERIQUE ECRAN LCD
INSTRUCTION MAN UAL
MANUELD'UTILISATION
Please read this manual carefully before operating the unit, and keep it
for future ref erence.
Lire attentivement ce manuel avant d'utiliser la télévision. L e conser ver
en vue d'une utilisation ultérieure .
Download from Www.Somanuals.com. All Manuals Search And Download.
|