Haier Flat Panel Television LE50H3280 User Manual

LE50H3280  
LED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Energy Star  
This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings  
will be achieved. Changing the factory default picture setting or enabling other features will increase power  
consumption that could exceed the limits necessary to qualify for ENERGY STAR rating.  
SYMBOL  
SYMBOL DEFINITION  
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral  
triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”  
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of  
electrical shock to persons.  
SA 1965  
INSTRUCTIONS: The exclamation point within an equilateral triangle is intended to alert the  
user to the presence of important operating and maintenance (servicing) instruction in the  
literature accompanying the appliance.  
SA 1966  
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be  
placed on the apparatus.  
Batteries installed warning  
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the  
like.  
FOR YOUR SAFETY  
Before operating the TV, please read this manual thoroughly. This manual should be retained for future reference.  
FCC Class B Radio Frequency Interference Statement  
WARNING: (FOR FCC CERTIFIED MODELS)  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy,  
and if not installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
4. Consult the dealer or an experienced radio/TV technician for help.  
NOTICE  
1. The changes or modifications not expressly approved by the party responsible for compliance could void the  
user's authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.  
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to  
this equipment. It is the responsibilities of the user to correct such interference.  
WARNING:  
To prevent fire or shock hazard, do not expose the TV to rain or moisture. Dangerously high voltages are present  
inside the TV. Do not open the cabinet. Refer servicing to qualified personnel only.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PRECAUTIONS AND REMINDERS  
Place unit on even surfaces.  
Unplug immediately if other  
foreign materials are put inside TV  
box or if the TV fell down.  
Do not cover or block any vents  
and openings. Inadequate  
ventilation may shorten the life of  
the display unit and cause  
overheating.  
Unplug immediately if  
Prohibit/Avoid opening TV  
cabinet.  
Avoid direct sunlight, dusty,  
humid and smoky areas.  
malfunction like no video/audio  
occurs, or smoke and bad odor  
come from TV.  
Don't throw any object inside the  
TV box like metals or other  
flammable materials.  
Remember to unplug the AC cord  
from the AC outlet before  
cleaning. Do not use liquid  
cleaners or aerosol cleaners to  
clean the display.  
Call service personnel to clean the  
internal part of the TV once a year.  
Don't place the TV in confined  
spaces or in a box when using it.  
Make sure to unplug the unit  
when not in use for a long period  
of time (days).  
Do not place the display near  
water, such as bathtub, washbasin,  
kitchen sink, laundry tub,  
swimming pool or in a damp  
basement.  
6 in.  
NOTE  
Notice for Remote Control  
Avoid Dropping  
Avoid Liquids  
Avoid Aerosol Cleaners  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment.  
To reduce the risk of electric shock or component damage, switch off the power before connecting other  
components to your TV.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades and a  
third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
Only use attachments/accessories specified by the manufacturer.  
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
Unplug this apparatus during lightning storms or when unused for long periods of time.  
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or  
has been dropped.  
Unplug the power cord before cleaning your TV.  
When moving your TV from an area of low temperature to an area of high temperature, condensation may form  
in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage.  
A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator,  
heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture  
may cause fire or electric shock.  
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable  
operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do  
not place your TV in a bookcase or cabinet unless proper ventilation is provided.  
Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of  
your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.  
Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the  
type of power supplied to your home, consult your dealer or local power company.  
Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The  
manufacturer’s warranty does not cover user abuse or improper installations.  
The power cord must be replaced when using different voltage than the voltage specified. For more information,  
contact your dealer.  
When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug  
the power cord.  
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.  
The wall socket should be installed near your TV and easily accessible.  
Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may  
cause fire or electric shock.  
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during  
electrical storms.  
Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your  
TV from damage due to power surges.  
Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to  
high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to  
qualified service personnel.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into  
your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric  
shock.  
Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord  
and contact your dealer immediately. Do not try to repair your TV yourself.  
Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal  
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.  
Continued use of your TV may cause fire or electric shock.  
Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with  
heavy dust or high humidity may cause fire or electric shock.  
Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before  
moving your TV.  
When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage  
the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period  
of time, unplug the power cord.  
To reduce risk of electric shock, do not touch the connector with wet hands.  
Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can  
damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine,  
fire or the like.  
If any of the following occurs, contact the dealer:  
- The power cord fails or frays.  
- Liquid sprays or any object drops into your TV.  
- Your TV is exposed to rain or other moisture.  
- Your TV is dropped or damaged in any way.  
- The performance of your TV changes substantially.  
This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily  
operable.  
CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of  
electric shock, do not perform any servicing other than that contained in the operating instructions unless you  
are qualified to do so.  
Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the  
National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the  
mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding  
connectors, location of antenna discharge unit, connection to grounding electrodes and requirements for the  
grounding electrode. See Figure below.  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE  
ANTENNA  
GROUND CLAMP  
ANTENNA DISCHARGE UNIT  
ELECTRIC SERVICE EQUIPMENT  
GROUND CLAMPS  
GROUNDING CONDUCTORS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article  
820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable  
ground shall be connected to the 6 English grounding system of the building, as close to the point of cable entry  
as practical. Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the  
adapter!  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAVE THESE INSTRUCTIONS  
Thank you for purchasing this Haier product. This easy-to-use manual will guide you in  
getting the best use of your product. Remember to record the model and serial number.  
They are on the label on back of the unit.  
Model number  
Serial number  
Date of purchase  
Staple your receipt to your manual. You will need it to obtain warranty service  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
IMPORTANT: Do not apply pressure to the screen display  
area which may compromise the integrity of the display.  
The manufacturer’s warranty does not cover user abuse  
or improper installations.  
TURNING ON THE TV  
1. Install the stand and place the TV on a solid surface.  
ATTACHING THE STAND  
IMPORTANT: The stand of the TV must be assembled  
prior to usage.  
Min  
1 m  
1.  
(blanket, foam, cloth, etc.) to prevent any damage to  
the TV.  
2. Carefully align the stand to the bottom of the TV.  
3. Fasten the stand using the supplied screws.  
NOTE  
Ensure that the TV is placed in a position to allow free  
back cover.  
To prevent any unsafe situations, no naked  
sources,  
such as lighted candles, should be placed on or in the  
vicinity.  
Avoid heat, direct sunlight and exposure to rain or water.  
The equipment shall not be exposed to dripping or  
splashing.  
2. Connect the antenna cable or cable TV cable to the  
ANT IN aerial socket on the back of the TV set. See  
PREPARING YOUR LCD TV FOR WALL MOUNTING  
3. Remote control:  
We suggest that you keep your TV at least 2.36 inches  
(60 mm) from the wall to prevent cable interference.  
Before mounting your TV on the wall, you need to  
remove the stand.  
Remove the cover of the battery compartment.  
Insert the 2 supplied batteries (Type AAA 1.5V).  
For your safety, please use only with a UL listed wall  
mount bracket with minimum weight of the TV without  
To attach a wall mount bracket to your TV:  
1. Remove the screws holding your TV to the stand.  
2. Remove the stand from your TV.  
3. Secure the wall mount bracket to the back of your TV  
using four screws (see page 18 for the size of the  
screws). Follow the instructions of the user manual  
that came with the wall mount bracket to install.  
4. Power:  
Plug the AC power cord into the AC IN jack on the  
back of the TV, then plug the other end of the cord  
into a working power outlet.  
NOTE  
5. Turn the TV on:  
The wall mount bracket and the screws are not  
included.  
Press on the remote control or POWER button on  
the side control panel of the TV.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
PERIPHERAL CONNECTION AND CONTROLS  
PERIPHERAL CONNECTION  
SIDE CONTROL  
MENU  
INPUT  
LINE OUT  
POWER  
#
Item  
Description  
Connect headphones to this jack.  
#
Item  
VOL+  
VOL-  
Description  
1
Press to increase the volume level.  
Press to decrease the volume level.  
1
HEADPHONE When headphones are inserted,  
2
3
the TV speakers will be muted.  
Press to go to the next channel in  
the channel list.  
Connect a coaxial audio cable  
from a sound bar, stereo system,  
receiver, etc.  
CH+  
CH-  
COAXIAL  
LINE OUT  
USB  
2
3
4
Press to go to the previous channel  
in the channel list.  
4
5
Connect stereo audio cables from  
a sound bar, stereo system,  
Insert a USB storage device to the  
USB port to view JPEG photos,  
and listen to MP3 music. (See  
page 16 for more information.)  
Press to open or close the on-screen  
menu.  
MENU  
INPUT  
Press to select the input source.  
Press the VOL+ button to change to  
the selected input source.  
6
7
Connect HDMI devices to these  
jacks. An HDMI cable carries both  
video and sound. You do not need  
to make an audio connection for  
an HDMI device. Note: The HDMI2  
port is MHL enabled.  
HDMI1  
5
6
(standby mode). When the TV is  
POWER  
HDMI2(MHL)  
completely disconnect power,  
unplug the power cord.  
HDMI3  
7
Connect the video cable from a  
computer.  
8
9
VGA  
Connect the audio cable from a  
computer.  
PC AUDIO  
RF  
Connect an antenna or cable TV  
cable to this jack.  
10  
Connect the video cable for a  
composite device.  
11 VIDEO  
Connect the audio cables for a  
component or composite device.  
R
L
12  
Connect the video cables for a  
component device.  
13 YPbPr  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
MAKING CONNECTIONS  
CONNECTING TO AN ANTENNA/CABLE WALL  
JACK  
CONNECTING PC  
RGB  
PC  
AUDIO  
(L/R)  
CONNECTING HEADPHONES  
CONNECTING EXTERNAL AUDIO/VIDEO DEVICE  
Using HDMI cable (best)  
MHL  
HDMI2  
HDMI3  
CONNECTING DIGITAL AUDIO DEVICE  
NOTE  
An HDMI cable carries both video and audio. You do not  
need to use any audio cables.  
You can connect MHL devices, such as the Roku Streaming  
Stick and compatible mobile phones and tablets to the  
HDMI2(MHL) port. A USB to HDMI cable is required to  
connect a mobile phone or tablet to the TV. Please check  
the documentation of your device.  
Using component cables (better)  
COMPONENT OUT  
L
R
Y
P
B
PR  
NOTE  
making connections.  
To play from the external device:  
1. Turn on the TV and the connected device.  
2. Press INPUT to open the input source list, then press  
to highlight the input to which the device was  
connected and press OK to switch.  
Using composite cable (good)  
COMPOSITE OUT  
L
R
VIDEO  
Select TV to watch TV from the RF input.  
Select HDMI1, HDMI2(MHL), or HDMI3 to play  
from a device connected to the HDMI1,  
HDMI2(MHL), or HDMI3 input.  
Select Composite to play from the device  
connected to the COMPOSITE input.  
Select Component to play from the device  
connected to the COMPONENT input.  
Select VGA to play from the PC connected to the  
PC AUDIO inputs.  
NOTE  
Cables are often color-coded to match color-coded jacks.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
OPERATING INSTRUCTIONS  
Item  
Power  
Descriptions  
USING THE REMOTE CONTROL  
disconnect power, unplug the power cord.  
Press to open the input source list.  
INPUT  
USB  
CC  
Press to switch to USB input (USB multimedia  
mode).  
Press this key to select the CC ,ON or OFF  
mode and CC on Mute.  
Switch to the HDMI2(MHL) input, If the Roku  
Streaming Stick is connected, press this  
button to return to the Roku home screen.  
HOME  
0~9 /  
number  
Press to enter a TV channel number  
(Press " " to choose the sub-channel).  
.
RECALL  
Press to switch to last viewed channel.  
Press VOL+ or VOL- to adjust volume level.  
VOL+/VOL-  
MUTE  
MENU  
Press to open or close the on-screen menu.  
Press CH+ or CH- to change TV channels.  
CH+/CH -  
BACK  
Return to the previous menu. If the Roku  
Streaming Stick is connected, press this  
button to go back to the previous screen.  
Press to display the information window.  
DISPLAY  
EXIT  
Press to exit the menu or on screen display  
(OSD).  
SAP  
Press to switch sounds: SAP, Stereo, Mono for  
ATV, or switch audio language for DTV.  
SLEEP  
Press to set the sleep timer.  
Press to adjust the picture aspect ratio.  
Press to switch the audio mode.  
Press to switch the picture mode.  
Enter the selected option or perform the  
selected operation.  
WIDE  
AUDIO  
PICTURE  
OK  
CH.LIST  
Press to display the Channel List.  
FAVORITE  
Press to display the Favorite List.  
Use the arrow buttons to move around in  
menus.  
PLAY  
Press to start playing the MEDIA, or to pause  
playing.(Used for models with MEDIA function  
only).  
Press to fast reverse MP3 playback in Music  
mode.  
REV  
Press to fast forward MP3 playback in Music  
mode.  
FWD  
Enter electronic program guide. If the Roku  
Streaming Stick is connected, press this  
button to view more options.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5. The auto channel scan usually takes a few minutes  
to complete but can take up to 20 minutes. You can  
cancel the channel scan by pressing EXIT.  
INITIAL SETUP  
will guide you through setting up basic settings  
including the menu language, time zone, and TV  
signal source.  
Initial Setup  
Channel Scan  
The channel scan may take a while to complete.  
1. Press  
to turn on the TV. The setup wizard screen  
to select your language, then press  
Analog: 0  
opens. Press OK to start the wizard.  
Digital: 0  
2. Press  
RF CH: 30  
Total Found: 0  
to continue.  
Initial Setup  
Please select your preferred language  
Language  
20%  
Exit  
Cancel  
English  
Français  
Español  
NOTE  
During initial setup, press  
screen and press EXIT to exit the initial setup.  
to return to the previous  
INPUT SOURCE  
Press INPUT to open the input source list, then press  
Back  
Select  
Next  
Exit  
switch.  
to highlight an input and press OK to  
3. Press  
to select your time zone, then press  
to continue.  
Initial Setup  
Time Zone  
Mountain  
Newfoundland  
Pacific  
Alaska  
Hawaii  
Samoa  
Atlantic  
Eastern  
Central  
Back  
Select  
Next  
Exit  
4. Press  
to select your tuner type, then press  
to start channel scan.  
Initial Setup  
Tuner  
NAVIGATING THE ON-SCREEN MENU  
1. Press MENU to open the on-screen menu.  
Air  
2. Press  
to select the main menu (Picture/  
Cable  
Audio/Channel/Setup/Lock), then press OK or  
to enter the sub-menu.  
3. Press  
to highlight a sub-menu item, then  
press  
to adjust the setting or select the  
desired option.  
Back  
Select  
Next  
Exit  
4. Press EXIT to close the on-screen menu.  
NOTE  
Air – Set the signal type to antenna. When set to  
Air, the TV can receive analog and digital (ATSC)  
broadcasting signals.  
Cable – Set the signal type to cable. When set to  
Cable, the TV can receive analog and QAM  
broadcasting signals.  
Press MENU to return to the previous menu. If the main  
menu is displayed, pressing MENU will close the on-  
screen menu.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PICTURE  
AUDIO  
Picture Mode  
Brightness  
Contrast  
Energy Saving  
Sound Mode  
Balance  
Standard  
0
Picture  
Picture  
Audio  
50  
50  
Bass  
50  
Audio  
Channel  
Setup  
Lock  
Color  
50  
Treble  
50  
Tint  
50  
Digital Audio Output Mode  
Audio Language  
Auto Volume Level  
Raw  
English  
Off  
Channel  
Setup  
Lock  
Sharpness  
Color Temperature  
50  
Cool  
Select  
Exit  
Select  
Exit  
Picture Mode – Select the picture mode. You can select: Sound Mode – Select the sound mode. You can select:  
Standard – A standard picture. The contrast,  
brightness, and sharpness are moderately increased.  
Standard – Balanced treble and bass. This setting is  
good for watching standard TV broadcasts.  
Vivid – A bright and vivid picture. The contrast,  
Music – Increase the treble and bass and preserve  
the original sound. This setting is good for listening  
to a musical program.  
Theater – Moderately decrease and enhance treble  
and bass for a rich sound experience.  
News – Balance treble and bass. This setting is good  
for watching a news program.  
brightness, and sharpness are  
increased.  
Mild – A soft picture. The brightness, contrast and  
sharpness level are lowered.  
User – Customized picture. Picture settings such as  
brightness, contrast, and color are manually  
adjusted.  
Energy Saving – The backlight brightness is  
User – Let you manually adjust sound settings.  
decreased to save energy.  
NOTE  
NOTE  
Manually adjusting audio settings will automatically  
change the Sound Mode to User.  
Manually adjusting picture settings will automatically  
change the Picture Mode to User.  
Balance – Adjust the balance between the left and right  
audio channels.  
Brightness – Adjust the brightness of the dark areas of  
the picture. Press  
to darken the picture. Press  
Bass – Adjust the low frequency sound. Press to  
to brighten the picture.  
decrease bass. Press to increase the bass.  
Contrast – Adjust the brightness of the light areas of  
the picture. Press to decrease the contrast. Press  
to increase the contrast.  
Treble – Adjust the high frequency sound. Press  
decrease treble. Press to increase the treble.  
to  
Digital Audio Output Mode – Select digital audio  
output type. You can select:  
Color – Adjust the color intensity of the picture.  
Tint – Adjust the color balance of the picture. Press  
to increase the red tones. Press to increase  
tones.  
the green  
Raw – Pass through the original digital audio sound.  
PCM – Output audio in 2-channel stereo.  
Sharpness – Adjust the color details of picture. Press  
Audio Language – Select an alternate audio language,  
if available. You can select English/Spanish/French.  
(Digital channels only)  
to soften the picture. Press to sharpen the picture.  
Color Temperature – Select the color temperature. You  
can select:  
Auto Volume Level – Adjust the volume to keep the  
volume level consistent when switching channels or  
when switching from a TV show to a commercial. You  
Normal – Give the white color a neutral tint.  
Warm – Give the white color a reddish tint.  
Cool – Give the white color a bluish tint.  
PC Settings – Adjust the computer image in VGA input  
(VGA input only). You can adjust:  
H-Pos – Adjust picture’s horizontal position.  
V-Pos – Adjust picture’s vertical position.  
Clock – Adjust the sample frequency.  
Phase – Adjust the focus of stable images.  
Auto – Automatically adjust the image settings.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CHANNEL  
SETUP  
Air/Cable  
Air  
Menu Language  
Aspect Ratio  
MTS  
English  
Normal  
Mono  
On  
Picture  
Picture  
Audio  
Auto Scan  
Favorite  
Audio  
Channel  
Setup  
Lock  
Blue Screen  
Audio Only  
Time  
Channel Skip  
Channel Number  
Channel Label  
Off  
Channel  
Setup  
Lock  
Noise Reduction  
Medium  
Select  
Exit  
Select  
Exit  
Air/Cable – Select the signal type.  
Menu Language – Select on-screen display menu  
language. You can select English/Français/Español.  
Air – Set the signal type to antenna. When set to Air,  
the TV can receive analog and digital (ATSC)  
broadcasting signals.  
Cable – Set the signal type to cable. When set to  
Cable, the TV can receive analog and QAM  
broadcasting signals.  
Aspect Ratio – Select the display mode. You can select:  
Full 100%  
image may appear distorted. (VGA input only)  
Point to Point – Display the VGA signal’s original  
aspect ratio. Black bars might be added for display.  
(VGA input only)  
Auto Scan – Press OK to start the auto channel scan.  
Normal – Display the original 4:3 aspect ratio with  
Favorite – Manually add and skip channels in your  
favorite channel list.  
vertical black bars on the left and right of the image.  
Wide – Use this option to view content recorded in a  
16:9 (wide-screen) aspect ratio.  
Channel Skip – Manually add and skip channels in your  
channel list.  
Zoom  
and bottom of the image may be cropped.  
Channel Number – Select the channel that you want to  
assign a customized label.  
Cinema – Stretch the image at the edges, but keeps  
a clear image in the center.  
MTS – Select the preferred sound track. You can select:  
Channel Label – Label a channel to make it easier to  
identify.  
Mono  
– Select this option if there is noise or static  
from a weak broadcast signal.  
Stereo – Select this option for programs broadcast in  
stereo sound.  
Picture  
Audio  
SAP – Select this option to enable audio in an  
alternative language, if available.  
Channel  
Setup  
Lock  
Blue Screen – When this option is set to  
will be blue instead of black when there is no input  
signal.  
On, the screen  
Audio Only  
audio.  
Select  
Exit  
NOTE  
1. Press OK to label the selected channel.  
2. Press  
Audio only works only when the input source is TV and  
the TV is receiving a broadcast signal.  
To exit audio only mode, press any button.  
3. Press  
to select the desired character for a  
4. Press OK after all the desired characters are entered.  
Time – Adjust the time settings.  
Time Zone – Select your time zone.  
Sleep Timer – Set the amount of time before the TV  
Daylight Saving Time – Select On (if your viewing  
area observes Daylight Saving Time) or  
(if your  
viewing area does not observe Daylight Saving Time).  
Clock – Set the date and time.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LOCK  
Noise Reduction – Select the noise reduction mode to  
reduce picture noise (snow). You can select  
Medium/High.  
_ _ _ _  
Enter Password  
Picture  
Audio  
Closed Caption – Adjust the closed captioning settings.  
CC Mode – Select closed captioning mode. You can  
select:  
Channel  
Setup  
Lock  
CC On – Turn on closed captioning.  
CC on Mute – Turn on closed captioning when the  
sound is muted.  
Analog CC – Select analog closed captioning mode.  
Digital CC – Select digital closed captioning mode.  
Select  
Exit  
1. Press OK or  
to enter password.  
Option – Customize digital closed captioning  
settings.  
2. Use the number buttons on the remote control to  
enter your 4-digit password. The default password is  
“0000”.  
3. After the correct password is entered, the Lock sub-  
menu screen opens.  
Mode – Select Custom to customize below settings  
or select Default to use default settings.  
Font Style – Select font style. You can select  
Default/Font 0~Font 7.  
Change Password  
Picture  
OK  
Font Size – Select font size. You can select Default/  
Normal/Large/Small.  
Audio  
System Lock  
US Rating  
Off  
Font Edge Style – Select font edge style. You can  
select Default/None/Raised/Depressed/Uniform/  
Left Shadow/Right Shadow.  
Channel  
Setup  
Lock  
Canada Rating  
RRT Setting  
Reset RRT  
Font Edge Color – Select font edge color. You can  
select Default/Black/White/Red/Green/Blue/Yellow/  
Magenta/Cyan.  
Select  
Exit  
FG Color – Select font color. You can select Default/  
White/Black/Red/Green/Blue/Yellow/Magenta/  
Cyan.  
Change Password – Press OK to set a new 4-digit  
password.  
Enter Old Password – Enter your old 4-digit  
password.  
BG Color – Select background color. You can select  
Default/Black/White/Red/Green/Blue/Yellow  
Magenta/Cyan.  
Enter New Password – Enter your new 4-digit  
password.  
FG Opacity – Select font opacity. You can select  
Default/Solid/Flashing/Translucent/Transparent.  
Password – Enter your new 4-digit password  
BG Opacity – Select background opacity. You can  
select Default/Solid/Flashing/Translucent/  
Transparent.  
System Lock – Turn the US and Canada rating limits on  
Over Scan – Extend part of the display past the visible  
area of the screen. The resulting picture will “zoom in”  
on the image center.  
Restore Default – Reset all settings to the factory defaults.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MPAA  
comes from MPAA rules.  
US Rating – Set the U.S. rating limits.  
TV – U.S. TV ratings. The TV ratings compose of two  
MPAA rating levels  
aspects: age-based and content-based.  
U.S movie (MPAA) ratings  
TV Rating  
Picture  
G
General audiences.  
ALL  
PG  
Parental guidance suggested.  
Audio  
Channel  
Setup  
Lock  
FV  
V
PG-13  
Suitable for children 13 and older.  
S
Parental guidance suggested for  
children under 17.  
L
R
D
NC-17  
X
Not suitable for children under 17.  
Adults only.  
Press OK to Lock or Unlock  
Select  
Exit  
Canada Rating – Set the Canada rating limits.  
Canada English – The ratings are for programs using  
the English rating system.  
Picture  
Audio  
TV-Y  
TV-Y7  
TV-G  
Canada English rating levels  
Canadian English ratings  
TV-PG  
TV-14  
TV-MA  
Channel  
Setup  
Lock  
C
Suitable for all children.  
Suitable for children 8 and older.  
General audiences.  
C8+  
G
Press OK to Lock or Unlock  
Select  
PG  
14+  
18+  
Parental guidance suggested.  
Suitable for children 14 and older.  
Adults only.  
Exit  
TV rating levels  
U.S TV ratings (content-based)  
Canada French – The ratings are for programs using  
the French rating system.  
ALL  
FV  
V
All ratings  
Fantasy violence  
Violence  
Canada French rating levels  
Canadian French ratings  
S
Sexual situations  
Strong language  
Suggestive dialog  
G
General audiences.  
L
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Suitable for children 8 and older.  
Suitable for children 13 and older.  
Suitable for children 16 and older.  
Adults only.  
D
U.S TV ratings (age-based)  
TV-Y  
All children.  
TV-Y7  
TV-G  
Suitable for children 7 and older.  
General audiences.  
NOTE  
When a rating is locked, that rating and all other higher  
ratings are locked. When a rating is unlocked, that rating  
and all lower ratings are unlocked.  
TV-PG  
Parental guidance suggested.  
Parental guidance strongly  
suggested.  
RRT Setting – Adjust RRT settings.  
TV-14  
Reset RRT – Reset RRT settings to the factory default.  
TV-MA  
Mature audiences only.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select or press on the remote control to stop  
MEDIA  
slide show playback.  
The USB Media Player allows you to connect a USB  
device to your TV and play music or photos.  
Select to change repeat mode. You can select  
Repeat One/Repeat ALL/None.  
Select to play the music in the current folder. To  
stop the music playback, highlight and press  
OK again.  
1. Connect your USB device to the USB port on the rear  
of the TV.  
Select to display the play list. Press EXIT to close  
the list.  
Select  
resolution, size, date and time. Press OK to close  
the information screen.  
Select to rotate the photo 90° clockwise.  
Select to rotate the photo 90° counterclockwise.  
Select to zoom in on the photo.  
Select to zoom out on the photo.  
Select to view a zoomed photo. Press  
on the remote control to move and view the photo  
in detail. Press EXIT to exit.  
2. Press INPUT and select USB, or press USB on the  
remote control to switch to USB input.  
USB 2.0  
Music  
Title:  
005  
N/A  
N/A  
2012  
Artist:  
Album:  
Year:  
Photo  
Music  
Bit Rate: 186K  
Sampling: 44K  
Size:  
5027KBytes  
OK  
Select  
OK  
00:00:20  
00:03:40  
Music  
Pause  
Repeat ALL  
005.mp3  
3. Press  
press OK.  
to highlight Photo or Music, then  
to highlight C, then press OK to  
Press  
1. Press  
to execute.  
to highlight an option, then press OK  
Select  
/
or press  
on the remote control to  
4. Press  
to select the  
that you want to  
to highlight  
pause or resume music playback.  
play, then press OK.  
Select  
reverse music playback.  
Select or press  
forward music playback.  
or press  
on the remote control to fast  
5. To navigate the playback, press  
an option on the operation banner, then press OK  
to execute.  
on the remote control to fast  
Photo  
Select  
to play  
Select  
to play  
Select or press on the remote control to stop  
music playback.  
Select to change repeat mode. You can select  
Repeat One/Repeat ALL/None.  
Select to display the song list. Press EXIT to close  
the song list.  
Photo  
Repeat ALL  
IMG_7777.JPG  
NOTE  
In photo and music mode, press EXIT to close the  
operation banner, and press OK to open it again.  
Pause  
In music mode, before pressing  
to adjust the  
1. Press  
to execute.  
to highlight an option, then press OK  
volume level, press EXIT to close the operation  
Select  
/
or press  
on the remote control to  
pause or resume slide show playback.  
Select  
Select  
to display the previous photo.  
to display the next photo.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TIPS  
LEGAL NOTICES  
Modifications  
Care of the screen  
Do not rub or strike the screen with anything hard as  
this may scratch, mar, or damage the screen  
permanently.  
Unplug the power cord before cleaning the screen. Dust  
the TV by wiping the screen and the cabinet with a soft,  
clean cloth. If the screen requires additional cleaning,  
use a clean, damp cloth. Do not use liquid cleaners or  
aerosol cleaners.  
The FCC requires the user to be notified that any  
changes or modifications made to this device that are  
not expressly approved by our company may void the  
user’s authority to operate the equipment.  
Cables  
Connections to this device must be made with shielded  
cables with metallic RF/EMI connector hoods to  
maintain compliance with FCC Rules and Regulations.  
Mobile telephone warning  
Canada ICES-003 statement  
To avoid disturbances in picture and sound,  
malfunctioning of your TV or even damage to the TV,  
keep your mobile telephone away from the TV.  
This Class B digital apparatus complies with Canadian  
ICES-003. Standard Television Receiving Apparatus —  
Appareil de réception télévision ordinaire, Canada BETS-  
7/NTMR-7.  
End of life directives  
We are paying a lot of attention to produce  
environmentally friendly products. Your new television  
contains materials, which can be recycled and reused.  
Canadian notice  
This Class B digital apparatus meets all requirements of  
the Canadian Interference-Causing Equipment  
Regulations.  
At the end of its life, specialized companies can  
dismantle the discarded receiver to collect the  
reusable materials and to minimize the amount of  
materials to be disposed of.  
Avis Canadian  
Cat apparel numerous de la classed B respected toutes  
les exigencies du règlement sur le materiel brouilleur du  
Please ensure you dispose of your old receiver  
according to local regulations. Haier is committed to  
safely recycling electronic products and product  
materials. Please check for a local recycling location in  
the United States at: 1800RECYCLING.COM.  
Canada.  
HDMI, the HDMI logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LCC in the United States and other  
countries.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT SPECIFICATION  
NOTE  
T  
T  
Model  
LE50H3280  
DISPLAY  
Viewable  
50”  
Television System  
Channel Coverage  
NTSC, ATSC  
NTSC: CH2-CH69 (Antenna)/CH1-CH135 (Cable)  
ATSC: CH2-CH69 (Antenna)/CH1-CH135 (Cable)  
CONNECTIONS  
Rear Connectors  
Side Connectors  
HEADPHONE  
COAXIAL  
LINE OUT  
USB  
HDMI1/HDMI2(MHL)/HDMI3  
VGA  
PC AUDIO  
RF  
VIDEO  
R
L
YPbPr  
WEIGHT & DIMENSION  
Dimensions with Stand (W x H x D)  
44.92" x 29.17" x 8.74"  
Dimensions without Stand (W x H x D) 44.92" x 27.05" x 2.76"  
Weight with Stand  
32.1 lbs  
28.8 lbs  
Weight without Stand  
WALL MOUNTING  
Wall Mount Pattern (H x V)  
Screw type  
400 x 200 mm  
M6  
POWER  
Power Consumption  
Standby  
150W  
< 1W  
Mains Power  
100-240V~50/60Hz  
10W+10W  
Audio Power  
Ambient Temperature  
41°F ~ 95°F  
PACKAGE CONTENTS  
Package Contents  
TV unit x 1  
TV stand x 1  
Remote control x 1  
Screws x 4  
User manual x 1  
Registration card x 1  
AC power cord x 1  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Please make these simple checks before calling service. These tips may save you time and money since charges for  
receiver installation and adjustments of customer controls are not covered under your warranty.  
Symptoms  
Items to Check and Actions to Follow  
“Ghost” or double image  
This may be caused by obstruction to the antenna due to high rise  
buildings or hills. Using a highly directional antenna may improve the  
picture.  
No power  
No picture  
Check if the TV’s AC power cord is plugged into the outlet.  
Unplug the TV, wait for 60 seconds. Then reinsert plug into the outlet  
and turn on the TV again.  
Check antenna connections at the rear of the TV to see if it is properly  
connected to the TV.  
Possible broadcast station trouble. Try another channel.  
Adjust the contrast and brightness settings.  
Check the Closed Captions control. Some TEXT modes could block the  
screen.  
Good picture but no sound  
Increase the volume level by pressing the VOL+ button on the remote  
control or on the TV side control panel.  
Press the MUTE  
Good sound but poor color  
Poor picture  
Adjust the contrast, color and brightness settings.  
Poor picture quality may occur when an activated S-VHS camera or  
camcorder is connected to your TV and other peripherals at the  
Snowy picture and noise  
Horizontal dotted line  
Check the antenna connection.  
This may be caused by electrical interference (e.g. hair dryer, nearby  
Television not responding to  
remote control  
Check whether the batteries are working. Replace if necessary.  
Clean the remote control sensor lens on the TV.  
You can still use the buttons on the side of your TV.  
Pixels (dots) that are always  
dark or always lit  
Your TV is precision-manufactured using an extremely high level of  
technology. However, sometimes pixels may not display correctly.  
These types of occurrences are inherent to this type of product and do  
not constitute a defective product.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
This Haier brand product, when shipped in its original container, will be free from defective workmanship  
and materials, and agrees that it will, at its option, either repair the defect or replace the defective product  
with a new or re-manufactured equivalent, for parts or labor for the periods set forth below:  
This warranty does not apply to the appearance of the product or the exterior of the product, which has  
additional excluded items set forth below:  
The warranty commences on the date the item was purchased and the original purchase receipt must be  
presented to the authorized service center before warranty repairs are rendered.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to  
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR USE ARE LIMITED TO THE PERIOD(s) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some  
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not  
apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other  
than those described herein, or to extend the duration of any warranties beyond the time period  
described herein on behalf of Haier.  
The warranties described herein shall be the sole and exclusive warranties granted by Haier and shall be  
the sole and exclusive remedy available to the purchaser. Correction of defects in the manner and for the  
Haier to the purchaser with respect to the product, and shall constitute full satisfaction of all claims,  
whether based on contract, negligence, strict duality or otherwise. In no event shall Haier be liable, or in  
any way responsible for any damages or defects in the product which were caused by repairs or  
attempted repairs performed by anyone other than an authorized service center or dealer; nor shall Haier  
be liable, or in any way responsible for incidental or consequential economic or property damage. Some  
states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not  
apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM STATE TO STATE.  
Warranty period for LE50H3280 one year parts and labor.  
Additional items excluded from warranty coverage: non-rechargeable batteries. What to do to obtain  
service or to obtain product literature, accessories, supplies or customer assistance: Simply call 1-877-337-  
3639. Be sure to have proof of purchase.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Made in China  
Printed China  
Haier America  
New York, NY 10018  
Model: LE50H3280  
Issued: Jul. 2013  
Fabriqué en Chine  
Hecho en China  
La Chine imprimée  
China impresa  
©2013 Haier America Trading, LLC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Sander H3140 User Manual
Haier Freezer c series freezer User Manual
Hamilton Beach Frozen Dessert Maker 68550E User Manual
Harbor Freight Tools Grinder 94186 User Manual
Havis Shields Personal Computer C PED1612 W4 User Manual
Heath Zenith Work Light UT 5571 BZ User Manual
Hubbell Switch Series 54 User Manual
Husqvarna Chainsaw 1151338 95 User Manual
Ice O Matic Ice Maker GEM0650A W R User Manual
Icom Marine Radio IC R2500 User Manual