Haier Dishwasher HDW12 TFE3SS User Manual

Dishwasher  
HDW12-TFE3SS  
HDW12-TFE3WH  
Instructions for Use  
0120504778D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Index  
Safety information  
2
4
Installation  
6
7
8
Getting to know your dishwasher  
How to fill rinse aid  
How to fill the detergent dispenser  
Not suitable for the dishwasher  
Arranging crockery, glasses, etc. in the dishwasher  
Programme overview  
9
10  
12  
13  
16  
17  
18  
23  
23  
Washing dishes  
How to keep your dishwasher in shape  
Care and maintenance  
Trouble Shooting  
Technical data  
Important information  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Safety information  
At time of delivery  
Check packaging and dishwasher immediately for signs of transport damage. If the appliance is dam-  
aged, do not put it into use but contact your supplier or customer service without delay.  
Please dispose of packaging materials properly.  
During installation  
Site the dishwasher and connect it up in accordance with the installation instructions.  
The dishwasher must not be connected to the electricity supply while installation is being carried out.  
Ensure that the domestic wiring is properly earthed.  
The mains electricity supply must conform to the details shown on the dishwasher nameplate.  
Do not connect the dishwasher to the electricity supply via an extension cable.  
Built-under and built-in appliances should always be installed under a continuous work surface which  
is attached to the adjacent cupboards, in order to ensure that the appliance is entirely stable.  
After the appliance has been installed,the mains plug should still be easily accessible.  
During installation, the power supply cord must not be excessively or dangerously bent or flattened.  
During normal use  
The dishwasher must only be used by adults for the washing of household dishes and cooking utensils.  
This appliance cannot be installed outdoor, not even if the area in which it is installed is covered by a  
roof; it is also very dangerous to leave it exposed to the rain and elements.  
Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward.  
The water inside the dishwasher is not suitable for drinking.  
Do not use solvents of any kind inside your dishwasher. They could cause an explosion danger.  
Open the door very carefully if the dishwasher is operating. There is a risk of water squirting out.  
Do not touch the heating element during or after a wash cycle.  
Fundamental rules to follow when using the appliance:  
- Never touch the dishwasher when barefoot or with wet hands or feet;  
- We discourage the use of extension cords and multiple sockets;  
- If the appliance is not operating properly or maintenance must be performed, disconnect the  
appliance from the power supply.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
If your family includes children  
This appliance is not intended for use by persons (including children) with reduced physical,sensory  
or mental capcabilities, or lack of experience and knowledge,unless they have been given supervi-  
sion or instruction concerning use of the appliance by a person responsible for their safety.  
Children should be supervised to ensure that they to not play with the appliance.  
Keep detergents out of the reach of children, who must also be kept away from the dishwasher when  
it is open.  
If a fault occurs  
If the appliance malfunctions, turn off water supply to the appliance and disconnect the power supply  
turn off and the plug from the wall socket. Then, consult the section entitled, "Fault finding" .If you  
cannot solve the problem, contact a service center.  
Only specialised personnel are authorised to make repairs.  
If the supply cord is damaged, it must be replaced by the manufacture, its service agent of similarly  
qualified persons in order to avoid a hazard.  
To maintain the EFFICIENCY and SAFETY of this appliance,we recommend:  
- call only the Service Centers authorized by the manufacturer, or the approved Service agents.  
- always use original Spare Parts.  
When disposing of old appliances  
Appliances which are no longer being used must be made inoperable by cutting the power supply  
cord and removing the door lock.  
Take the appliance to a designated waste disposal center.  
Dangerous voltage  
Warning  
Children could get locked in the appliance (risk of suffocation)  
or get stuck in other positions. Therefore: Remove the mains  
plug, cut the mains wire and set aside. Damage the door lock so  
that the door can no longer be closed.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
EN  
Positioning the appliance  
Positioning the appliance in the desired location. The back of the appliance should rest against the wall,  
and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and  
drain hoses that can be positioned to the right or the left to facilitate proper installation.  
Levelling the appliance  
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher,  
making it level. The appliance should not be inclined more than 2˚. If the appliance is level, it will help  
ensure proper performance.  
Cold water connection  
Connect the water supply hose to a threaded 3/4 (gas) connector,  
making sure that it is fastened tightly in place (see fig.A).  
If the water pipes are new or have not been used for an extended  
fig.A  
period of time, let the water run to make sure that the water is  
clear and free of impurities. If this precaution is not taken, there  
is a risk that the water inlet can get blocked and damage the  
appliance.  
Warning  
The appliance is to be connected to the  
water mains using new hose-sets and  
that old hose-sets should not be reused.  
Anti-Flooding protection  
The dishwasher is equipped with a system that stops the supply of water in the event of a problem with the water  
supply hose, or leaks within the unit, in order to prevent damage to your home. If for any reason the box contain-  
ing the electrical components happens to get damaged, turn off the power supply and remove the plug for the  
appliance from the socket immediately. In order to guarantee that the anti-flooding feature operates properly, the  
"A" box with water supply hose must be attached to the water supply tap as shown in fig.B. No other type of  
connection is acceptable.The water supply hose must not, under any circumstances, be cut, as it contains  
electrical parts which are live. If the length of the hose is not adequate to make a proper connection, the hose  
must be replaced with one which is long enough. This hose is available upon request from specialised retailers  
and approved service center.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Drain hose connection  
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making  
sure to avoid bending or crimping it. If necessary, fit a syphon trap (U-bend) with a connecting piece for  
the electrical drain hose (fig.B). The free end of the hose must be at a height between 40 and 100 cm  
and must not be immersed in water.  
fig.B  
Attention:  
The connecting piece for syphon trap (U-bend) must be securely  
fastened to the wall to prevent the drain hose from moving and  
allowing water to spill outside the drain.  
Electrical Connection  
After making sure that the voltage and frequency values for the current in the home correspond to those  
on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical  
system is correct for the maximum voltage on the rating plate, insert the plug into an electrical socket  
which is earthed properly (the earthing of the appliance is a safety requirement mandated by law).  
If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace  
the whole cable, rather than using adaptors or the like as they could cause overheating and burns.  
Caution:  
The dishwasher plug must be accessible even when the appliance  
is installed as a built-in unit so that maintenance can be done safely.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Getting to know your dishwasher  
Close-up view (control panel)  
A
B
C E  
H
I
delay  
J
G
D F  
A
B
C
D
E
"POWER" Light  
"DELAY" Button  
F
G
H
"POWER" Button  
"HALF LOAD" Light  
"HALF LOAD" Button  
"DELAY" Light  
Time-remaining Indicator  
Low Rinse Aid Indicator Light  
Heat Indicator Light  
I
J
Knob For Selecting Cycle  
Dishwasher interior  
a
c
b
e
f
d
g
e
f
a
b
c
d
Upper Rack  
Bottom Spray Arm  
Washing Filter  
Lower Rack  
g
Detergent and Rinse Aid Dispenser  
Top Spray Arm  
Silverware Basket  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
How to fill rinse aid  
Rinse aid  
H
I
This product makes dishes sparkle and helps them to dry without  
spotting. The dispenser is located on the inside panel of the door .  
When the low rinse aid indicator "H"on the control panel and the me-  
chanical indicator "H1" on the dispenser light, you must load rinse  
aid.  
H1  
Loading the rinse aid  
Regardless of the type of detergent dispenser installed on your appliance,  
you must proceed as indicated below when loading the rinse aid.  
To open the dispenser, turn the "1" cap in an anti-clockwise direction  
and then pour in the rinse aid, making sure not to overfill. The amount of  
rinse aid used for each cycle can be regulated by turning the " 2" dose  
adjustor, located beneath the "1" cap, with a screwdriver. There are 6  
different settings; the normal dosage setting is 3.  
1
2
Important  
Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spot-  
ting occurs, the dosage adjustor should be turned to a higher setting. If the dishes have white  
streaks, turn the dosage adjustor to a lower setting.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to fill the detergent dispenser  
EN  
Detergent  
4
Detergent specifically intended for use with dishwashers must be used.  
The dispenser must be refilled before the start of each wash cycle fol-  
lowing the instructions provided in the "Programme overview". The de-  
tergent dispenser is located on the inside panel of the door.  
3
Loading the detergent  
To open the " 3 " cover on the dispenser, press the "4" button.  
The detergent for the wash cycle should be poured into the " 5 "  
compartment.  
6
The detergent for the pre-wash cycle should be poured into the “  
6 ” compartment.  
After the detergent has been placed in the dispenser, close the  
cover and press down until it clicks in place.  
5
Notice:  
To facilitate closing the cover, remove any excess detergent on the edges of the dispenser.  
Notice:  
DO NOT use 3 in 1 or similar tablets when Heat Wash,Rapid Wash and Soak programmes  
are selected.  
Warning:  
Do not place the tablets in the tub or the cutlery basket as this will result in poorer wash  
results. The tablets should be placed in the detergent doser.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Not suitable for the dishwasher  
EN  
What you should not put into the dishwasher  
Cutlery and tableware manufactured in whole or part from wood.They become faded and unsightly in  
appearance.Furthermore,the adhesives that are used are not suitable for the temperature that occur  
inside the dishwasher.Delicate decorative glassware and vases,special antique or irreplaceable china.  
The decorative patterns on such items will not be dishwasher-proof.  
Plastic objects that are not resistant to hot water, copper and pewter utensils are also not suitable.  
Decorative patterns printed or painted onto the surface of crockery, glasses, etc.,aluminium and silver  
items tend to become discoloured or faded if washed in the diswasher. Some types of glass can become  
opaque in appearance after they have been washed many times in a dishwasher. Highly absorbent  
materials, such as sponges and towels,should never be placed in the dishwasher.  
Our recommendation  
In future, only purchase table or kitchenware that has been confirmed as being dishwasher-proof.  
Important  
Dishes or cutlery that have been soiled by tobacco ash, wax,  
Iubricating grease or paint, should not be put in the dishwasher.  
Damage to glassware and other dishes  
Possible causes  
type of glass or manufacturing process  
chemical composition of detergent  
water temperature and duration of dishwasher programme.  
Suggested remedy  
Use glassware or porcelain dishes that have been marked ‘dishwasher-proof’ by the manufacture.  
Use a mild detergent that is described as ‘kind to dishes’. If necessary, seek further information from  
detergent manufacturers.  
Select a programme with a low temperature and a short duration as possible.  
To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the  
programme has ended.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Arranging crockery, glasses, etc. in the dishwasher  
Before placing the dishes in the dishwasher, remove larger food  
particles to prevent the filter from becoming clogged, which re-  
sults in reduced performance.  
If the pots and pans have baked-on food that is extremely hard  
to remove, we recommend that they are soaked before washed.  
This will eliminate the need for extra wash cycles.  
Pull out the rack to load the dishwasher.  
How to use the lower rack  
We recommend that you place the most difficult to clean items  
on the bottom rack: pots, pans, lids, serving dishes and bowls,  
as shown in the figure to the right.  
fig.C  
It is preferable to place serving dishes and lids on the sides of the  
racks in order to avoid blocking the rotation of the top spray arm.  
Pots, serving bowls, etc. must always be placed face down.  
I
II  
(see fig.C)  
Deep pots should be slanted to allow the water to flow out.  
) so that  
The silverware basket can be doubled (see fig.D  
III  
V
IV  
only one section may be used when the silverware load is  
light. This also makes space for additional pots and pans  
and it can also be placed in the upper rack.  
Silverware should be placed in the silverware basket with  
the handles at the bottom; if the rack has side baskets, the  
spoons should be located individually into the appropriate  
slots. Especially long utensils should be placed in the hori-  
fig.D  
zontal position at the front of the upper rack.(see fig.D  
)
Warning  
Knives and other utensils with sharp points must be loaded in the basket with their points  
down or placed in a horizontal position.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
How to use the upper rack  
The upper rack is designed to hold more delicate and lighter  
dishware, such as glasses, cups and saucers, plates, small  
bowls and shallow pans (as long as they are not too dirty)(see  
fig.E).  
Position the dishes and cookware so that they do not get  
moved by the spray of water.  
fig.E  
The upper rack can be adjusted for height by using the knobs  
located on both sides of the rack itself (see fig.F).  
Adjust the upper basket to the higher level and you have  
more space to accommodate those taller pans and trays in  
the bottom basket.  
fig.F  
Shelf  
Lean tall glasses and those with long stems against the shelf-  
not against other items to be washed.  
Place glasses, cups and small bowls on the additional cup rack.  
The additional cup rack can be swivelled in or out as required  
(see fig.G).  
fig.G  
Knife rack  
The knife rack clips onto the side of the top basket, giving you  
the freedom to wash your large sharp knives separately and  
out of harm’s way (see fig.H).  
fig.H  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme overview  
EN  
Detergent  
Half  
Rinse  
Aid  
Wash  
Description of cycle  
Types of load  
Load  
Extended  
programme  
Prewash  
5g  
Wash  
Pre-wash with hot water.  
Extended wash.  
Rinses with cold water.  
Rinse with hot water.  
Drying.  
Very dirty dishes,  
25g  
pots and pans. (Not  
HEAVY  
to be used with deli-  
cate items.)  
5g  
5g  
5g  
5g  
5g  
15g  
25g  
15g  
Prewash use cold water.  
Extended wash.  
Rinse with cold water.  
Rinse with hot water.  
Drying.  
Normal load of dirty  
dishes, pots and  
NORMAL  
pans, Standard daily  
cycle.  
Prewash use cold water.  
Extended wash.  
Rinse with cold water.  
Rinse with hot water.  
Drying.  
25g  
15g  
Lightly soiled deli-  
NORMAL ECO  
cate items.  
Economic cycle for  
Extended Wash.  
Rinse with cold water.  
Hot rinse.  
25g  
15g  
15g  
delicate items. Run  
GLASSWARE  
immediately after  
Drying.  
dishes are used.  
Short wash.  
Cold rinse.  
Very lightly solied  
QUICK 30  
mixed dishes.  
12g  
For dishes that only  
Hot rinse.  
Drying.  
RINSE  
require a rinse and  
dry.  
Pre-rinse of dishes  
while waiting for a  
full load.  
Short cold wash to pre-  
vent food residue from  
drying on the dishes .  
PRE-RINSE  
When the programme is finished leave the door open  
30°(approximately 100mm) to improve the drying performance.  
” be able to applied  
”not to be applied  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Washing dishes  
Programme selection  
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as  
well as the amount and condition of food remains, with the details contained in the wash cycle table.The  
corresponding programme sequence, duration and consumption details are shown in the right half of the  
overview. For example:  
Use the« Normal Eco» programme for dishes and utensils which have Lightly soiled delicate items.  
Earn savings  
If only a small number of dishes have been loaded into the dishwasher,selecting a programme that  
operates at the next lowest temperature which should be sufficient.  
Programme data  
The stated programme data are based on standard operating conditions. The values can vary consider-  
ably according to:  
different amounts of dishes  
temperature of mains water supply  
pressure of mains water supply  
ambient temperature  
fluctuations in mains voltage  
machine-related factors (e.g. temperature, water volume,...)  
Switching the dishwasher ON  
Turn on the tap.  
C
Close the door after loading the appliance  
A
B
E
H
I
Set On-Off button “B” to On. The state indicator "A" light.  
Rotate the knob to select programme you wish.  
The time-remaining indicator display  
the time of the programme you selected.  
D F  
G
After 3 seconds the appliance emits a short warning signal,  
and start the programme, the state indicator "A" blinks .  
Warning  
When the dishwasher power on, the programme which the knob indicated  
can not be carried out, you must Rotate the knob to another programme  
and then back to it.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
End of programme  
Six beeps will indicate that the wash cycle has finished and the state indicators "A" light.  
Switching the dishwasher OFF  
Several minutes after the programme has ended:  
Set On-Off button to Off  
Open the door .  
Turn the water tap off.  
Remove dishes, etc. when they have cooled down.  
Notice:  
When the appliance is already underway press the button "B" for 3 seconds, all of  
the settings will be cancelled.  
Interrupting the programme  
Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open  
the door fully until spray arm has stopped rotating.  
When you open the door, the dishwasher will beep ten times every thirty seconds.  
If the appliance has already heated up or the hot water was switched ON and then the appliance door  
opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may  
open due to expansion.  
Delayed start programming  
You can delay the start of a programme in increments of 1 hour up to 24 hours.  
Close the door after loading the appliance.  
Switch dishwasher ON.  
Immediately press the Delayed Start button “ F ”, the delayed start indicator “ E ” blinks, the remain-  
ing time indicator “ G ” changes to “  
”.  
Press the Delayed Start button for 2 seconds until the numerical display show the required delay.  
To cancel the time delay setting, pressing the Delayed Start button until the delayed start indicator  
“ E” goes out.  
Rotate programme knob “ J ” to select the desired programme.  
C
E
A
H
B
D F  
G
I
J
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
After 3 seconds the delayed start indicator “ E ” blinks, the time-remaining indicator “ G ” will blink and  
decrease , the programme will start until the delayed start indicator “ G ” goes out .  
Cancelling or modifying a cycle  
A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the  
detergent may have already been used, and the appliance may have already drained the wash water.  
If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, “ Loading the  
detergent ”).  
To modify a cycle that is already underway, follow the instructions contained in the paragraph entitled  
"Reset drain function", and select the programme you wish (see the paragraph entitled, "Switching  
the dishwasher ON").  
"HALF LOAD" Button  
This button (see" Close-up View (Control Panel), letter " D ") makes it possible to wash dishes using only  
the upper rack if there are not enough dishes for a full load. This will allow you to save on water and  
energy consumption.  
To select "HALF LOAD":  
Press the HALF LOAD load button “  
” , HALF LOAD load indicator “ C ” lights.  
D
Select the programme ( see the paragraph entitled“ Switching the dishwaher ON”)  
If the door is closed, after 3 seconds, the programme starts automatically.  
- Please keep in mind that the amount of detergent should also be adapted to the HALF LOAD.  
- To cancel the HALF LOAD , you can press the HALF LOAD button “ D ” again ,  
until the HALF LOAD indicators “ C” goes out.  
C
E
A
H
B
D F  
G
I
J
Reset drain function  
You can use Reset drain function to stop the washing cycle under running by Rotating the knob to  
"Reset ", and the appliance will stop after a few minutes drain phase.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to keep your dishwasher in shape  
EN  
After Every Wash  
After every wash, turn off the water supply the appliance and leave the door slightly ajar so that moisture  
and odors are not trapped inside.  
Remove the plug  
Before cleaning or performing maintenance, always switch off the remove the plug from the socket. Do  
not run risks.  
No solvents or Abrasive Cleaning Products  
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning  
products. Rather, It is recommended that you use only a cloth and warm soapy water.  
To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little  
white vinegar, or cleaning product made specifically for dishwashers.  
Moving the Appliance  
If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can be  
positioned on its back.  
Seals  
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.  
Periodic cleaning with a damp sponge will prevent this from occurring.  
The door should not be left in the open position since this could present a tripping hazard.  
When You Go on Holiday  
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and  
then remove the plug from the socket, turn off the water supply and leave the door of the appliance  
slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and maintenance  
EN  
Regular inspection and maintenance of your appliance helps to prevent problems from occurring.This  
saves time and aggravation.You should therefore carefully inspect the inside of your dishwasher from  
time to time.  
Overall condition of appliance  
Check that no grease or scale has accumulated on the inside of the dishwasher.  
If you discover any deposits:  
Clean the interior of the dishwasher thorughly with a dishwasher detergent solution.  
H
Rinse-aid  
Check the LOW RINSE AID indicator “ H ”, on the front  
panel. Top up with rinse-aid,if required.  
I
Filters  
The filters “ 7”, “ 8” prevent larger particles of food in the  
water from reaching the pump.These particles may occa-  
sionally block the filters.  
When the appliance has finished washing, check the fil-  
ters for particles of food and, if required, clean.  
After undoing the coarse micro-filter “ 7 ” , the filter unit  
“8” can be removed. Remove any particles of food and  
rinse the filters under running water.  
7
Insert the filter unit “ 8 ” and tighten the coarse micro-  
filter.  
8
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Spray arms  
Lime and remnants of food in the washing water can block the  
nozzles in the spray arms “ 9 ” and “ 10 ” and the arm mountings.  
Inspect the nozzles in the spray arms for blocked holes  
due to remnants of food.  
9
If necessary, pull the lower arm “ 10 ” upwards and lift it off.  
Unscrew the upper spray arm “ 9 ”.  
10  
Clean both spray arms under running water.  
Refit the spray arms. Ensure that the lower arm has locked  
into place and the upper one is screwed tight.  
Ensure that the power supply is turned off prior to removal  
and cleaning of any internal pars.  
Trouble Shooting  
Resolving minor problems yourself  
Experience has shown that you can resolve most problems that rise during normal daily usage yourself,  
without having to call out a service engineer.Not only does this save costs,but it also means that the  
appliance is available for use again that much sooner. The following list of common occurrences and  
their remedies should help you identify the causes of most problems.  
Problems...  
...when the appliance is switched on  
Appliance does not start up  
Fault with fuse in mains electricity supply.  
Plug not inserted in wall socket.  
Appliance door not closed properly.  
Programme button has not been pressed.  
Water tap not turned on.  
Blocked strainer in water intake hose.  
- The strainer is situated in the Aquastop or supply-hose connection.  
Caution  
Do not forget that repairs should only be carried out by a qualified  
specialist. Improper repairs can lead to considerable equipment dam-  
age as well as danger to the user.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Error display on the time-remaining indicator  
When the buzzer emits 10 short warning signal every 30 seconds and the time-remaining indicator  
display "E3"  
Have you checked whether:  
the drain hose is too low.  
When the buzzer emits 10 short warning signals every 30 seconds and the time-remain-  
ing indicator display "E4"  
Have you checked whether:  
the drain hose is crimped or bent.  
the drain hose is too high.  
When the buzzer emits 10 short warning signals every 30 seconds and the time-remain-  
ing indicator display "E5"  
Have you checked whether:  
the water is turned on and the hose is connected properly;  
the water supply to the house is on and has sufficient pressure;  
the water supply hose is crimped or bent;  
the filter for the water supply hose is clogged.  
the drain hose is too low.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
When the buzzer emits 10 short warning signals every 30 seconds and the time remain-  
ing indicator display "E2" or "E6", Contact the nearest authorized service center.  
If you take all these checks and the dishwasher still does not function or your dish-  
washer have any other error display, you can power the dishwasher OFF, and wait a few  
minutes. You can power the dishwasher on, try it again , if the dishwasher still does not  
function and/or the problem persists, contact the nearest authorised service center and  
provide them with the following information:  
the nature of the problem.  
the model type number (Mod...) And the serial number (S/N...), which are indicated on the plate  
located on the side of the inner part of the door.  
Lower spray arm rotates with difficulty  
Spray arm is blocked by small items or food remains.  
Lid in detergent compartment cannot be closed  
Detergent compartment has been overfilled.  
Mechanism is clogged with remnants of detergent.  
Remnants of detergent stuck inside dispenser  
Compartment was damp when it was filled up with detergent. Compartment must be dry before  
detergent is added.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Water remains inside appliance after programme has ended  
Blockage or kind in drainage hose.  
Pump is jammed.  
Filters are blocked.  
The programme is still running. Wait for the programme to end .  
...during washing  
Unusual amount of foam is creased  
Normal washing up liquid has been poured into the rinse-aid container.  
Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the  
next washing cycle.  
Appliance stops suddenly while washing is taking place  
Cut off electricity supply to appliance.  
Water supply has been interrupted.  
Knocking sound can be heared while washing is taking place  
A spray arm is knocking against the dishes inside the appliance.  
Rattling sound can be heared while washing is taking place  
Crockery has not been stacked properly inside the appliance.  
Knocking sound coming from inlet valves  
This is caused by the way the water pipes have been laid and it has no effect upon the way the  
appliance functions. There is no remedy for this.  
...with the dishes,cutlery, etc.  
Remnants of food are stuck to the dishes, cutlery,etc.  
Dishwasher was not loaded properly. Jets of water could not reach all parts of the dishes, ect.  
Too many items in the rack.  
Items in the rack were touching each other.  
Not enough detergent was added to dispenser.  
Selected wash programme was not intensive enough.  
Rotation of spray arm was obstructed by dishes, etc.  
N ozzles in spray arm are blokcked by remnants of food.  
Filters are blocked.  
Filters have been incorrectly fitted.  
Waste-water pump is jammed.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Plastic items are discoloured  
Not enough detergent was added to dispenser.  
Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent.  
White stains are left on crockery, glasses have a milky appearance  
Not enough detergent was added to dispenser compartment.  
Amount of rinse-aid was set too low.  
Although water is quite hard, no salt has been put in appliance.  
Water softener was set too low.  
Lid on salt container is not screwed tight.  
If you used a phosphate-free detergent , try a detergent containing phosphates and compare results.  
Dishes,cultlery,etc.have not been dried  
Selected programme did not include drying function.  
Amount of rinse-aid was set too low.  
Items were removed from dishwasher too soon.  
Glasses have a dull appearance  
Amount of rinse-aid was set too low.  
Tea stains or traces of lipstick have not been completely removed  
Detergent does not have a sufficient bleaching effect.  
Washing temperature was set too low.  
Traces of rust on cutlery  
Cutlery is not sufficiently rustproof.  
Salt content in washing water is too high.  
- Lid on salt container is not screwed tight.  
- Too much salt was spilt while filling container.  
Glasses become clouded and discoloured; coating cannot be wiped off  
Unsuitable detergent was used.  
Glasses are not dishwasher-proof.  
Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance  
Amount of rinse-aid set too high.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Technical data  
60 cm  
60 cm  
Width  
Depth  
Height  
85 cm  
Capacity  
12 standard place settings  
Mains water pressure  
Power voltage  
0.03-1.0MPa  
220-240V~ 50Hz  
10A  
Maximum current intensity  
Total absorbed power  
1950W  
Important information  
Notes on waste disposal  
Old appliances still have some residual value. An environment-friendly method of disposal will ensure  
that valuable raw materials can be recovered and used again.  
When an appliance has reached the end of its working life,unplug it from the mains.Cut through the  
mains cable and dispose of it together with the plug.  
Destroy the door locking mechanism. This will ensure that children at play cannot become locked inside  
and are not exposed to the risk of suffocation.  
Your new appliance was protected by suitable packaging while it was on its way to you. All materials  
used for this purpose are environment-friendly and can be recycled. Please make a contribution to  
protecting the environment by disposing of the packaging appropriately.  
Do not allow children to play with any parts of the packaging. There is a risk of suffocation by the  
cardboard boxes and the plastic wrapping.  
Up-to -date information concerning options for disposal can obtained from your retailer or local munici-  
pal administration.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
General information  
Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited  
as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to  
the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.  
Information on comparability tests implemented in compliance with  
AS/NZS 2007  
Appliance loaded in accordance with standard specifications.  
Example of loaded dishwasher: See fig. 1 , 2.  
Capacity: 12 place settings  
Comparability programme: NORMAL ECO  
Rinse-aid setting: 5  
Detergent: 5g+25g  
Fig.1  
Fig.2  
Height-adjustable top-basket must be inserted in the uppermost position.  
If the comparability tests do not comply fully with AS/NZS 2007, e.g., degree of soiling, type of dishes and  
cutlery, etc., contact the appliance manufacturer before starting the test.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Nail Gun H5527 User Manual
Haier Dishwasher WQP4 1A User Manual
Haier Washer HW60 1482 User Manual
Hamilton Beach Oven 32600 User Manual
Hasbro Games Pretty Pretty Princess User Manual
Honeywell Home Security System 3 144 User Manual
Hotpoint Refrigerator HDR190I User Manual
HP Hewlett Packard Wheelchair HP 11947A User Manual
IBM Computer Drive NAS 200 User Manual
Impex Home Gym PHE1000 User Manual