Haier Cell Phone M101 User Manual

Haier  
User Manual for  
M101  
Mobile Phone  
October, 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
CONTENTS  
2 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
3 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
4 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
Security and performance  
Emergency service  
In any country, if want to dial the emergency telephone, you can directly dial 112 (or other emergency service  
telephone), you must confirm the power of mobile phone is on and it is within the service area, then input the  
emergency service number (112 or other numbers) and press “Dial” key to make the call. Any digital network has  
the emergency telephone service 112.  
Note: Because of the property of the mobile network, each emergency call is not sure to succeed.  
Individual  
When using the radio frequency device including mobile phone, it is possible to have some disturbance  
on some medical devices with bad shielding performance, such as Acoustic on or heart pacemaker.  
Before using the mobile phone, please consult with the producer of the medical device or your doctor.  
For the user with heart disease, please pay close attention to the setting of ring tone volume and  
vibration.  
In the places where the explosive gas or production process exist, such as oil warehouse, or chemical  
factory, please pay the close attention to restricts of use for radio frequency device. When your mobile  
phone is in idle, it still emits electromagnetic signals. If required, you should turn off the mobile phone.  
Please pay attention to the transportation safety. When driving, the mobile phone should not be used, if  
using it; it is suggested to stop the car first.  
When your mobile phone is missing or stolen, please immediately inform the telecom department to  
prohibit the SIM card from using. It will make you free from the economic loss caused by other pseudo  
calls.  
When you contact with telecom department or sales agents, they should know the IMEI number of your  
mobile phone, which is printed on the label of back of the mobile phone (remove battery to find it).  
Please record the number and keep it safely for future use.  
To make your mobile phone misused, please adopt prevention measures, such as: set SIM card PIN  
number or personal security code or change the code in time as other person knows it.  
When leave the car, please keep the mobile phone at the unobvious place, it would better take it or lock in the  
luggage boot.  
Please keep the children from the mobile phone, charger or battery.  
Mobile phone  
The mobile phone includes the precise electric wires, magnet and battery system, which should be dealt  
with carefully, especially pays attention to the following important points:  
Your mobile phone can produce electromagnetic field; please do not place the magnetic storage media  
such as computer disk near to the mobile phone.  
When using the mobile phone near to the electric devices such as TV, telephone, radio and personal  
computer, it maybe leads to disturbance and effect on the performance of mobile phone.  
No matter when, please do not make the mobile phone and its fitting parts touch the liquid or keep them  
in the wet environment.  
Please do not keep the mobile phone in the environment with over-temperature or under-temperature.  
Please do not keep the mobile phone near to the flame, litten cigar or cigarette.  
5 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
Please do not scrawl on the mobile phone.  
Please do not fall the mobile phone off or behave any rude beating on the mobile phone.  
Please do not keep the mobile phone together with computer magnetic disk, credit card, traveling card  
or other magnetic objects. Otherwise the stored information in magnetic card or credit card is affected  
by it.  
Please do not keep the mobile phone or battery at the position with the temperature beyond 60, such  
as the car instrument panel, screen sill or the back of the glass screen with direct shining.  
Please do not try to disassemble the mobile phone or any other accessories.  
Only little wet or anti-static cloth can be used to wipe the mobile phone. Please do not use dry or static  
cloth to wipe the mobile phone. Please do not use the cleanser with chemical reagent or grinding sand,  
otherwise the cleanser will damage the shell of the mobile phone.  
The receiver of mobile phone will produce some heat during the using normally; same as the mobile  
phone is charging.  
Please remember the recycle, the bandbox package for the mobile phone is very suitable for recycle.  
Please do not keep the mobile phone in the status of non-battery or empty battery capacity; otherwise  
some data may be initialized.  
Some mental material included in the mobile phone may make you allergic, which is determined by  
your physique and health condition.  
Please do not put the mobile phone in the rear pocket of the trousers or skirt to prevent from damage  
when sitting. At the same time please do not put the mobile phone at the bottom of the bag to prevent  
from impact or strong extrusion.  
If vibration function is on, please keep the mobile phone far from heat sources (such as heater) and  
prevent it from sliding from the desk top for the vibration.  
Battery  
Please do not keep the batter device short circuit, which will damage on the battery, produce heat and  
even cause fire.  
It is prohibited to throw the battery into the fire for preventing from explosion. The discarded battery  
should be returned to the provider, or be put into he specified recycle bin; do not put them into the home  
waste.  
Please do not make the metal, such as coin or key ring, touch the end point of the battery caused short  
circuit.  
Please do not remove the battery when the mobile phone powers on.  
Please do not put the mobile phone’s battery into mouth, because the electrolyte will result in poisoning.  
One built-in battery in the mobile phone can only be replaced by the professional engineer. If using the  
battery with wrong type to replace, it is possible to result in explosion. Please deal with the used battery  
according to provider instruction.  
When using any battery and charger which is not specified by the provider, potential danger exists. The  
resulted damage on the mobile phone is beyond the warranty.  
Note: If the battery is damaged, the material in the battery should be prevented from touching. If touching  
with the skin, it should be washed with plenty of water, or get help from a doctor if necessary.  
On the way  
The car must be securely controlled all along, please pay attention to driving.  
Please comply with all rules in the local transportation security regulations.  
6 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
Before sending and answering phone, you should closely notice the local law system on use for wireless  
phone and pay attention to it when using.  
Please send or answer call after stopping the car according to the requirements of driving condition.  
Except for emergent situation, it is prohibited to stop the car at the side of the highway for receiving or  
dialing the phone.  
Airbag, brake, quick control system and oil ejection system are not affected by the wireless transmission.  
If you meet problems, please contact with car franchiser.  
When the airbag swells, it will produce strong external force. Please do not install or place wireless  
talking device above the airbag or within the touchable area of the airbag after it extends. If the car  
wireless talking is not installed correctly, once the airbag swells, it will result in serious damage.  
When renewing petroleum, please turn off your mobile phone. Same case also applies to the place  
where the bidirectional wireless device is prohibited for using. Please do not put the flammable and  
explosive substances together with the mobile phone or carry them together; for internal spark may  
result in combustion.  
The electronic system in the car, such as the lock brake, quick control and combustion ejection system  
generally are not affected by the wireless radio wave. The manufacturer of this type of devices will tell  
you whether these devices have good shielding function. If you have doubt that the wireless wave  
causes the car’s failure, please contact the franchiser. Please do not disassemble the mobile phone before  
the quantified professional personnel checks it.  
On the plane  
When on the plane or near to the plane, please turn off the mobile phone and take out the battery. The  
behavior to use the mobile phone on the plane is illegal, which may result in danger for the operation of  
plane, also damage the mobile phone network. The violator may be paused or canceled the mobile  
phone service, even prosecuted, or punished doubly.  
Under the emergent situation, it is allowed to use the mobile phone with the agreement of crewman in  
terms of security regulation.  
Device from other manufacturers  
If using the devices, cable or fitting parts from the other providers without Haier production or  
authorization, it is possible to result in invalidation for warranty; moreover, it has also influences on the  
normal use of the mobile phone. It is obligatory to use fitting parts of Haier.  
Non-ionic radiation  
A wireless device should connect to the antenna by the non-radiation cable (for example coaxial-cable).  
The antenna should not be installed near to the human body, except the metal shielding exists between  
them, such as metal roof. Only the antenna specially designed for this mobile phone can be used. The  
antenna without authorization or with fitting parts refitted or added by users own maybe damages the  
mobile phone or violates the related rules, which results in performance decrease or radiation with  
unqualified standards.  
Effective use  
To obtain the best performance with the least power consumption, please pay attention to the following  
rules: when talking, please do not use the hand to cover the position of built-in antenna, which may  
affect the quality of talking and cause that the mobile phone works with the output power beyond the  
7 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
normal standard and shorten the talking and idle duration of battery.  
Energy of radio frequency  
Your mobile phone is a kind of wireless transmitter and receiver with low power. Once the mobile  
phone turns on, it will receive and transmit wireless signal intermittently. The network system will  
control the transmitting power of the mobile phone.  
Electromagnetic radiation  
Your mobile phone completely complies with the standard on the wireless radiation constituted by the  
nation authoritative organization and international health association. These standards of limitation are a  
part of the comprehensive rules and compose of permissive standard of public wireless radiation. These  
standards are graduate formed through the long-term and in-depth scientific research conducted by some  
independent scientific organization ICNIRP (International Commission on Non-ionizing Radiation  
Protection). These limit standards contain lots of security capacity so as to keep person safe, whatever  
the age or health status, and also consider the changeable factors of various kinds of measure condition.  
If the content described in this manual does not conform to your mobile phone, please take yours as the  
standard. Haier possesses the right of the final explanation for this instruction manual.  
Haier reserves the right to modify the technical specification without the pre-notification.  
Haier reserves the right to modify this manual without the pre-notification.  
The manufacturer reserves the right to modify the product technical specification without the  
pre-notification.  
8 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M101 User manual  
1 Start to use  
Before using the mobile phone, please read this chapter. The chapter will tell you how to install charge and  
maintain your mobile phone’s battery. It also tells you the information about the digital GSM network and  
instructs you how to insert and unlock SIM card. The detailed information about it will be also stated in the  
chapter.  
1.1 Battery  
The mobile phone contains one battery. When purchasing, the battery is not charged, but maybe supports to  
turn on the phone. A new battery should be charged for at least 16 hours, after the battery is used up for the  
first time, then it is charged fully for use; same as the second and third time, then the battery will easily reach  
the best status for use.  
1.1.1 The disassembly and installation of battery  
When dissembling, make the mobile phone back face upward, slide the back cover, then take out the back  
cover. Lift the top of the battery upward and take it out.  
When installing, insert the clip at the bottom of the battery into the corresponding clamping slot in the  
phone and press the battery downward, then install the phone’s back cover.  
1.1.2 Battery charging  
Insert the adapter of the charger into the slot on the base of mobile phone, and keep the side with arrow  
upward.  
Connect the charger with the power. At this moment, a sign of charging will appear indicating the battery is  
charging.  
When the charging sign is static (and indicating the charging is completed), which means the charging is  
completed. During the charging, the battery, mobile phone and charger will become heated, which is normal  
phenomena.  
After the charging completed, disconnect the power and pull off the charger.  
Warning: When charging, the phone must be placed at the site with the temperature  
between 5and 55and use the charger from the provider. When using the charger  
without permission, it is possible to result in danger, moreover violate the permission and  
terms of warranty for mobile phone.  
1.1.3 Use of battery  
The phone idle duration provided by the manufacturer is based on the ideal work environment. In the practice,  
the work duration of battery will vary with the different network state, work environment and use mode.  
Please deal with the battery according to local regulations; do not take it as the life waste.  
1.1.4 Indication of battery capacity  
When the mobile phone powers on, the level of battery capacity displays on the top right corner of the screen.  
9 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
The residual power capacity is represented by indication bars from one to four levels.  
1.2 Connection of network  
1.2.1 SIM card  
Your network provider will provide you with a plug-in type of SIM card (user identification card). SIM card  
is the key for you to enter the digital GSM network. Before using the mobile phone, you must insert valid SIM  
card into the mobile phone.  
All information related with network connection records in the SIM card, also including name, telephone  
number and short message. SIM card can also be taken out from your mobile phone and insert into any GSM  
mobile phone for use (new mobile phone automatically identifies SIM card.).  
To prevent from loss and damage on the information in the card, please avoid touching the metal plat area  
and keep the SIM far from electric and magnetic field. You can not enter the GSM network as the SIM card  
damages.  
Warning: Before taking out SIM card, the mobile phone must be turned off. It is absolutely prohibited  
to insert into or take out SIM card when the phone is connecting to external power, otherwise SIM card may  
be damaged.  
1.2.2 Insertion of SIM card  
Generally SIM card is put into a card, and it must be taken out carefully before installation.  
Turn off the mobile phone and remove the battery and other external power.  
Insert SIM card into the bottom of two lugs and ensure the metal plane area is downward and the position of  
its corner is the same as which of clamping slot’s corner;  
Push SIM card , lock SIM card and install the battery;  
If you need take out SIM card, please first turn off mobile phone and take out the battery, then remove SIM  
card.  
1.2.3 Unlocking of SIM card  
To prevent from illegal use, SIM card adopts PIN (personal identification number) code to encrypt for  
protection. When this function is selected (refer to chapter 7.3.2), each time you turn on the mobile phone,  
you must input PIN code to unlock SIM card for sending or answering calls. A user can also relieve SIM card  
protection (refer to chapter 7.3.2). In this case, SIM card is not prevented from illegal use.  
Long press Pwr to turn on the mobile phone;  
Input PIN code, press left function key to confirm. For example: if PIN is set as 1234, then input as following:  
1 2 3 4  
If you continue inputting wrong code for three times, then your SIM card will be locked. The mobile phone  
will query PUK code. (Please contact your network operator.)  
Note: Your network operator will set a standard PIN number (from 4 bits to 8 bits) for  
your SIM card; you should change it to your private password as rapidly as possible. Please  
refer to chapter 7.3.2.  
10 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
1.2.4 Connect to network  
After SIM card is decrypted successfully, the mobile phone will search your registered network or local  
available network automatically (It will display “network is connecting, please wait for a while” in the screen).  
Once the connection is successful, the network sign for the network operator will appear on the top of the screen.  
At present, your mobile phone is in idle status; you can send or answer calls.  
1.3 Idle screen and content  
You can get the information needed via the indication and sign on the idle display screen.  
the strength level of signal  
Unread messages in indicate bar  
Phone memory is full  
SIM card memory full  
Missed calls in indicate bar  
Meeting mode  
Outdoor mode  
Silent mode  
Alarm is set  
Unread messages in idle  
Missed calls in idle  
Current battery capability left  
Indicate to unlock key lock  
2006/06/06[Tu]  
0606  
Current date  
Current time  
CMCC  
Network operator  
Menu  
Press Left Soft Key to access the menu.  
Press Right Soft Key to access Contacts  
Contacts  
11 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
1.4 Keys  
The index of function for keys is illustrated as following:  
Speaker  
Up key  
RFK  
Left function key  
Right function key  
Power  
Send  
Number key  
Down key  
# key  
* key  
# key  
12 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
Left function key (Sl)  
Right function key (Sr)  
Up key (U)  
Confirm, select, pop up menu; short press to enter main menu in idle  
Cancel, delete , exit; short press to enter Contacts in idle  
Move upward/long press to the first character; short press to enter  
Call history screen in idle  
Down key (D)  
Send key (Snd)  
Move downward/long press to the last character; short press to enter  
SMS screen in idle  
Dial, answer calls; press snd key to enter Outgoing calls screen in  
idle  
Power key (Pwr)  
* key (*)  
Power on /off, hang up calls, terminate (return to idle screen)  
* key in idle; in idle long press to locked/unlocked phone,  
continuously short press to input the symbol “+”; in editing, short  
press to activate symbol input and long press input Enter  
Switch the input methods in edit screen; Long press to enable and  
disable meeting in idle  
Input number or text; long press to quick dial when in idle, (It needs  
to set except 1); in menu mode, press number keys corresponding  
with function to enter corresponding function.  
# key (#)  
0-9  
Note: In this user manual, “press” means to press a key down then release, while “long press”  
means to press a key for more than 1.5 seconds then release.  
1.5 Input of Number and character  
Key  
1
Capital letter  
@1 )  
A B C 2  
Small letter  
@1 )  
a b c 2  
2
3
D E F 3  
d e f 3  
4
G H I 4  
g h i 4  
5
J K L 5  
j k l 5  
6
M N O 6  
P Q R S 7  
T U V 8  
m n o 6  
p q r s 7  
t u v 8  
7
8
9
W X Y Z 9  
space . 0-  
*
w x y z 9  
space . 0 -  
*
0
*
In edit screen, press to activate input In edit screen, press to activate input  
screen of symbol  
screen of symbol  
#
#
#
Switch the input method in edit  
screen  
Switch the input method in edit  
screen  
1.6 Input message  
In order to make it convenient for you to input the characters in the phone, such input  
methods as capital and small letter are specially built in M101 mobile telephone, which makes you  
look up the relevant characters with less times of key-stoke. You may press direction keys of  
up/down to select the characters or words needed.  
13 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
1.6.1 Edit screen for inputting the text  
It is used to input the text content, including the renaming, editing name, notes message etc.  
1.6.2 Switch the input methods  
When you want to input characters, you must select a kind of input method first.  
The built-in input methods of mobile phone include as following:  
-
-
-
-
T9EN T9en)  
abc ABC)  
others  
123  
To switch proper input method, please press:# key.  
Symbol  
-
To switch Symbol input method, please press* key.  
1.6.3 Input method of intelligent English  
The Intelligent English small letter input law has intelligence. Use number keys 2-9 to input  
the corresponding letter. Each letter can be inputted through pressing the key only once and the  
word on the screen will change along with it. You may press U key or D key to look over the  
candidate words across pages and then press LSK key to confirm your selection. At this time, the  
words you select will appear the text input area. For example, if you want to input “ok”, you only  
need to press the number key 6 and 5 (you may see the corresponding letter on the keyboard).  
Then you will see the word “ok” to appear in the candidate area for word. Press LSK key to  
confirm your selection and finish the input.  
The operation procedure of intelligent English (capital letter: EN) is same as the input  
method of intelligent English (small letter: en), and the only difference is the anterior one can  
capitalize the first letter of word automatically.  
1.6.4 Input method of English letter  
Take the input method of English small letter as example: Within the input method of  
English small letter, press the number key once for inputting the first letter on the key, and quickly  
press twice for inputting the second letter. If the inputted letter and the first letter are on the same  
key, please wait for the cursor to appear again and then input the new letter. For example, if you  
want to input “ok”, you only need to continuously press the number key 6 three times for  
inputting “o”, then continuously press the number key 5 twice for inputting “k” so as to complete  
the input.  
The detailed operation procedure of inputting the capital letter is the same as which of small  
letter.  
14 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
1.6.5 Input method of other letter  
Follow location input methods in your phone.  
1.6.6 Input method of number  
The input method of number is mainly convenient for the inputting of number. Use 0—9  
keys to input ten numbers from 0 to 9. You only need to press the corresponding number key input  
the corresponding number.  
1.6.7 Input method of symbol  
Press * key to activate the input method of symbol, which is used to input various kinds of  
symbols conveniently. When this kind of input method is selected, thirty-four symbols will appear  
on the screen. You may press direction keys of up/down to select the symbol. After you find out  
the symbol needed, press OK key to complete the inputting of one symbol. When press * key  
again, it will exit the input method of symbol and automatically back to the input method which  
you used last time.  
1.7 Dial and answer the phone  
After the setting of mobile phone is completed, you can dial or answer phone. This chapter  
will provide all basic information you needed.  
Turn on/off phone  
1. Long press Pwr key to turn on phone, then the starting animation appears.  
2. If PIN code is required, please refer to chapter 1.2.3.  
3. In the status of power on, long press Pwr key to turn off phone.  
1.7 Make a phone call  
When the sign of network operator appears on the display screen, the phone enters the idle  
screen, and then you can dial or answer calls. The indication bar on top left corner of screen  
displays the intensity of network signal (Four level bars mean the strongest signal). The barrier has  
great influence on the quality of talking, so moving in a small range can enhance the intensity of  
signal effectively.  
There are multiple dialing modes from idle screen, namely: direct dial, phone book dial,  
quick dial and SIM card dial.  
1.7.1 Direct dial  
Dial the domestic phone  
The simplest method to make a phone call is to use number keys to input the phone number  
(if dialing domestic long-distance number, please add area code), then press Snd key and start  
calling. When dialing, the display screen will display name (The number already exists in phone  
15 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
book.) and telephone number.  
After input telephone using number keys, please press Options key to activate the menu,  
then the following menu items will appear.  
Select Call to call out the phone;  
Select Save number to save the telephone number (Refer to chapter 3.1.1 for detailed  
operation);  
Select Send SMS to enter short message edit screen and complete the corresponding  
operation (Refer to chapter 4.1.1 for operation on function of short message);  
After talking, press Pwr key to hang up the phone. The phone will display the duration for  
call this time.  
Dial the fixed extension telephone  
Some fixed extension telephone can not directly be dialed. You need to connect the main line  
first then dial the extension number. If you insert symbol “P” between the main number and the  
extension number when inputting the number, the phone will make the call for you and dial the  
extension number automatically. The method to input “P” is: long press number 0 key (which will  
be displayed on your screen). You can input more than one “P” to increase the duration of  
inputting the extension number.  
Dial international phone call  
When dialing international phone call, you only need input the symbol “+” (Continuously short  
press * key until the symbol “+” displays on the display screen.), then input the country code and  
whole telephone number.  
For example: if making a phone call to France, you need continuously short press * key until  
the symbol “+” appears, then input the country code of France “33” and whole telephone number.  
1.7.2 Make a phone call from contacts  
In idle screen, press RSK key to enter contacts screen and find corresponding person and  
phone, then you can press Snd key to dial.  
1.7.3 Speed dial  
Speed dial is also called abbreviated dial, you can respectively set 8 number keys as  
telephone number (refer to chapter 7.2.7 on setting).  
In idle screen, long press the number keys from 2 to 9 which are set as quick dial to  
automatically dial corresponding set phone number. If the selected number key is not set as quick  
dial, the mobile phone will prompt “Phone number empty”.  
1.7.4 SIM card dial  
In idle screen, press number key and # key in turn to dial from SIM card. That is the phone  
number stored at the corresponding position in SIM card will display automatically. Activate  
Options menu to select Call or press Snd key to dial out phone.  
16 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
1.7.5 Unsuccessful calls  
The phenomena of unsuccessful calls may appear during the dialing, for example: the line is  
busy, reject the call, the phone of other side is not within service area or the phone of other side is  
power off, etc. the phone will prompt “Call failed”. At this time if you set auto redial (refer to  
chapter 7.2.4), the phone will automatically redial for 10 times but all failed, or be canceled  
initiatively.  
1.8 Answer the call  
When a new call comes, the phone will display the phone number or name of the new call,  
and press D key and U key to silence. Moreover inform you by ring/ mute mode according to  
your setting.  
When the phone is in ring, and the indication of incoming call displays on the screen, press  
Snd key or Answer key to answer the call.  
After talking is over, press Pwr key to hang up the phone.  
During the talking, the phone will prompt new call by short “toot” sound. At this time you  
can press Snd key or Answer key to answer new call; moreover the previous call will become  
hold status. If do not want to answer, you can press Pwr key or Reject key to reject the call.  
1.9 During the talking  
During the talking, activate Options key, which may complete the following functions: Hold,  
Mute, New call, New SMS and Contacts.  
Select Hold to hold the current talk (related with SIM card), at this time both parties can not  
hear the voice, meanwhile the menu changes to Active, select this menu to return to normal  
talking.  
Select Mute to pause voice of current talking, at this time you can hear the voice of other side,  
but it can not hear your voice, which facilitates you to talk with other local person to during the  
talking. The menu changes to Unmute, select this menu to return to normal talking.  
Select New call to make the second phone call, or press number keys to make a new call  
during the talking, then press Snd key to dial out phone.  
Select New SMS to enter new short message screen and complete the corresponding  
operation, press Back key to exit short message screen and back to talking status.  
Select Contacts to enter phone book screen, and implement the corresponding operation,  
which facilitates to search a phone number during the dialing.  
When dialing the extension, after hearing the prompt voice of the other side, directly dial the  
extension number, and only extension number displays on the screen. When extension dialing  
completed, press Delete and Back key to display the number of switchboard.  
Press Handfree to enable handfree function, Handfree changes Receiver, press Receiver to  
resume normal.  
1.9.1 Adjust volume  
Press U key and D key to decrease or increase the volume during the communication. Refer  
to 1.4 chapter illustration for key positions.  
17 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
1.9.2 Reject the call  
Press Pwr key or Reject key reject the call. After the rejection, the duration of talking will  
display.  
1.9.3 New SMS  
During the dialing phone, if there is new SMS, the phone will have prompt voice to remind  
you.  
1.9.4 Answer the new call  
Refer to chapter 1.8 for the operation and content of answering the call, the different point is  
that after answering a new call, the previous call will keep hold. The previous talking can be  
activated by Switch key, and the new call will keep hold.  
Refer to chapter 1.9.5 for operation about answering two calls simultaneously.  
1.9.5 Answering two calls simultaneously  
When answering two calls, the current talking number displays at the first line, the other call  
will keep hold; two calls can be switched by pressing Switch key.  
When the second call is active, activate Options key and implement the following functions:  
Switch, New SMS, Hang up, Mute, Conference (related with SIM card) and Contacts.  
Select Switch to switch two calls.  
Select New SMS to enter new short message screen and complete the corresponding  
operation, press Back key to exit short message screen and back to talking status.  
Select Hang up to reject current talking, so does press Pwr key.  
Select Mute to pause voice of current talking, at this time you can hear the voice of other side,  
but it can not hear your voice, which facilitates you to talk with other local person to during the  
talking. The menu changes to Unmute, select this menu to return to normal talking.  
Select Conference to hold conference call or talk with the specified participant separately.  
Select Contacts to enter phone book screen, and implement the corresponding operation,  
which facilitates to search a phone number during the dialing.  
1.9.6 Conference talking  
During the conference talking, conference call can be held or talk with the specified  
participant separately.  
Functions include: Hold, New SMS, New call, Mute, Contacts and Conference list.  
Select Hold to hold the current talk (related with SIM card), at this time both parties can not  
hear the voice, meanwhile the menu changes to Resume, select this menu to return to normal  
talking.  
Select New SMS to enter new short message screen and complete the corresponding  
operation, press Back key to exit short message screen and back to talking status.  
18 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
Select New call to make the second phone call, or press number keys to make a new call  
during the talking, then press Snd key to dial out phone.  
Select Mute to pause voice of current talking, at this time you can hear the voice of other side,  
but it can not hear your voice, which facilitates you to talk with other local person to during the  
talking. The menu changes to Unmute, select this menu to return to normal talking.  
Select Contacts to enter phone book screen, and implement the corresponding operation,  
which facilitates to search a phone number during the dialing.  
If a new call comes during the conference talking, please refer to chapter 1.9.4 for processing.  
Select Conference list: Enter current conference member list screen to hang up and divide  
operation of the phone.  
Press Handfree to enable handfree function , Handfree changes Receiver , press Receiver  
to resume normal.  
1.10 Emergency call  
In any country using the digital GSM network, if your phone is within the area covered by  
network (it can be aware by checking network signal intensity on top right corner of screen.), you  
can call the emergency service. If your phone is within the area covered by network, you can make  
an emergency call even you have not SIM card.  
”112” is a standard emergency number of GSM, which can be used in any GSM  
network of the world.  
19 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
2 Menu operation  
This chapter will help you get to know the function and structure of the mobile phone’s menu,  
and detailed explain how to user-define the functions of mobile phone for meeting your needs,  
moreover represent you how to use basic operation function.  
2.1 Structure of main menu  
The function menu of the mobile phone contains: MessagesCall historyProfiles、  
SettingsAccessoriesSTK.  
2.2 Selection of main menu  
At the bottom of the menu screen, press up/down keys to select, then press Sl key to confirm.  
2.3 Other selection modes  
In the idle screen, all function keys define the special menu function, which facilitates you to  
directly enter menu function, illustrated as following:  
The default shortcut keys of special function are as follows:  
Function key  
Left function key  
Right function key  
Up key  
Items of function menu  
Enter main menu  
Enter Contacts  
Enter Call history  
Down key  
Enter SMS  
Send key  
Recent dialed numbers  
Power key  
Return to idle screen or power on/off  
Speed dialing (29); enter the menu in the menu  
mode; long press 1 key to enter Voice mail  
Dial number in the specified position of SIM card  
Long press number keys from 2 to 9  
Number + #  
20 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
2.4 Function table of menu  
Contacts  
Messages  
SMS  
Cell broadcast  
Call history  
Profiles  
Missed calls  
Answered calls  
Outgoing calls  
Call duration  
Normal  
Meeting  
Outdoor  
Silent  
Settings  
Phone settings  
Call settings  
Security  
Network  
Reset  
Accessories  
Alarm  
Schedule  
Calculator  
Games  
STK  
21 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
3 Contacts  
This chapter describes various kinds of functions of contacts. In idle screen, press the right  
function key to enter contacts list.  
3.1 Contacts list  
Press RSK key to enter the contacts list in idle screen. All the records in the contacts  
according to the pronunciation of name and alphabet. After selecting the record, you may press  
Snd key to dial the telephone. And you may press LSK key to active options to implement the  
following functions:  
Select View detail to view the contact detail;  
Select Create to create new contact;  
Select Copy: to copy the data selected to mobile phone (SIM card);  
Select Move: to move the data selected to mobile phone (SIM card);  
Select Delete: to delete the phone records not needed to save;  
Select Find to find contact;  
Select Display type to set contact display type;  
Select My number to edit number about this mobile phone number;  
Select Memory status to view the memory status.  
3.1.1 Create  
After entering into the contacts, activate Options key and select the Create. Firstly to  
confirm the storage type, including two options: “SIM” and “Phone”. If full memory appears,  
which means the mobile phone’s memory has no enough space to save the record. The memory of  
phone must be cleaned up for more space.  
When the storage type is “Phone”, on the screen of new record, it may input name, mobile  
number, office number, home number.  
When inputting the name, it will enter the edit screen of character. Please refer to the section  
1.6 for operation of editing character.  
When inputting the mobile number, office number and home number, it will enter into the  
input screen of number, press LSK key for confirmation.  
After completing the input, press LSK key, the mobile phone will prompt “Saved!”.  
When the storage type is “SIM”, it may only input name and one mobile number.  
3.1.2 Copy  
After entering into the contacts, activate Options key and select the Copy, the copy function  
of the mobile phone contains: Copy current, Multi-copy, To SIM, To phone.  
Select Copy current to copy current contact;  
Select Multi-copy to enter into multi-copy screen, this function contains: From SIM and  
From phone;  
Select From SIM: select the contact which local in SIM copy to phone;  
Select From phone: select the contact which local in phone copy to SIM;  
22 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
Select To SIM: select all the contacts which local in phone copy to SIM;  
Select To phone: select all the contacts which local in SIM copy to phone;  
3.1.3 Move  
After entering into the contacts, activate Options key and select the Move, the copy function  
of the mobile phone contains: Move current, Multi-move, To SIM, To phone.  
Select Move current to move current contact;  
Select Multi-move to enter into multi-move screen, this function contains: From SIM and  
From phone;  
Select From SIM: select the contact which local in SIM move to phone;  
Select From phone: select the contact which local in phone move to SIM;  
Select To SIM: select all the contacts which local in phone move to SIM;  
Select To phone: select all the contacts which local in SIM move to phone;  
3.1.4 Delete  
After entering into the contacts, activate Options key and select the delete, the copy function  
of the mobile phone contains: Delete current, Multi-delete, SIM all, Phone all.  
Select Delete current to delete current contact;  
Select Multi-delete to multi-delete you selected contact;  
Select SIM all: delete all the contacts which local in SIM;  
Select Phone all: delete all the contacts which local in phone.  
3.1.5 Find  
After entering the contacts, select Find, and the search types for selecting will display as  
following:  
Select Name: to input a special word to search the record with the special word within all  
recorded names;  
Select Number: to input a special phone number to search the record with the special phone  
number within all recorded numbers;  
You can select the corresponding search type according to the content required to find. For  
example, you can select Number as search type and enter “1390” to search all phone numbers  
containing “1390”. A list of result will be displayed. If no matching record, the screen will display  
“No match”.  
In the contacts list window, you can find contact by pressing corresponding key containing  
the first letter of name. After scroll bar slides to contacts with the initial, you can press U and D to  
find desired contact.  
3.1.6 Display type  
The phone provides two kinds of display type:  
Select Name: name will be displayed as linkman;  
Select Name and number: name and number will be displayed as linkman;  
23 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
3.1.7 My number  
Enter the edit screen of my number, you can modify and look over the local phone number.  
3.1.8 Memory status  
The function of memory status capacity is set in this mobile phone, which makes user clearly  
understand the current usage situation of the mobile phone.  
Memory status mainly provides the total and used amount of mobile phone and SIM card.  
3.2 View detail  
On idle screen, press Sr key to enter contacts list. List all the records in the contacts  
according to the pronunciation of name and alphabet. After selecting the record, you may press  
Snd key to dial the telephone or press Sl to view detailed information to perform as follows:  
Select Edit: to edit the content of records in the phone according to the new record;  
Select Send SMS: to send SMS to the selected number;  
Select Delete: to delete the phone records not needed to save;  
Select Copy: to copy the data selected to mobile phone (SIM card);  
Select Move: to move the data selected to mobile phone (SIM card);  
Select Send contact: send contact way of linkman to others as SMS. Press Sl to select and  
conform it.  
24 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
4 Message  
This chapter will introduce message services supported by GSM. Some service may be not  
supported by local or roaming GSM.  
4.1 SMS  
Your phone can receive the edited text message via the service center. You also can send a  
new message or reply a message (via the service center) if the network supports. If your service  
provider supports message service, you can receive/send messages optionally.  
The functions of messages include: Create, Inbox, Outbox, Sent, Drafts, My folder, Settings,  
Voice mail and Memory status.  
4.1.1 Create  
A) To  
Press the direction keys to slide the scroll bar to select “To”, and directly press number keys  
to input the desired number of contact person; or select it from contacts. (When the input area has  
number, Contacts key on the bottom left corner will change to OK.) Press Sl key to enter the  
screen of contact person, press U or D key to select the receiver, press Options to select “Select”  
and “Confirm” to complete selection. Enter receiver list screen and activate Options: Edit  
recipients to access the edit screen of the contact person and edit the contact person, Send to send  
message, Add to add receiver, Contacts to enter the screen of contact person and add the contact  
person, Delete to delete selected contact, Delete all to delete all receivers.  
On the screen of “Create”, activate Options key to operate as followings:  
Select Contacts List to access the edit screen of the contact person and edit the contact  
person;  
Select Send to send present message (only when insert number have this menu).  
Select Contacts to access the receiver screen and add the receiver;  
Select Save to save the message in “Drafts” in order to use it again and  
avoid repeated input; (This menu will be valid only when the number or  
content has been added.).  
Note: For each time, the maximum number of receivers is 20.  
When receivers are over 20, the phone prompts “Warning: More  
than 20 recipients”.  
B) Content  
The current screen is used to edit the content of message.  
If highlight local in Content, activate Options key to operate as follows:  
Select Edit content to enter into edit screen;  
Select Send to send current message (This menu will be valid only when the contact person  
has been added.);  
Select Insert contact to insert the contact person saved in the contacts and its corresponding  
number;  
25 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
Select Save to save the message in “Drafts” in order to use it again and avoid repeated input,  
refer to chapter 4.1.5; (This menu will be valid only when the number or content has been added.).  
C) Send message  
Before sending message, you must input the number of SMS center. This step needs to be set  
only once, please refer to 4.1.7.  
When the message is sending, the phone will prompt “Sending…”; if sending is failed, the  
phone will prompt “Sending failed!” and the message which failed sending or unsent messages  
will save to “Outbox”.  
If sending is successful, the phone will prompt “Send successfully!”, the sent message will be  
put into “Sent”.  
4.1.2 Inbox  
“Inbox” is to store the messages received.  
A) Receive message  
When receiving a message, the phone will give a prompt sound (The setting of this character  
refers to section 7.1.1) and then the message will be put into Inbox. The screen will display an  
icon of small envelope to prompt there is a message you have not read yet refer to section 1.3,  
and the message will be saved automatically in the phone or SIM card. The maximum number of  
messages to be saved (including those to be sent) is dependent on the storage capacity of the  
phone and SIM card.  
B) Read SMS  
Select the message to read, and press Options to activate menu:  
Select Read to read the message;  
Select Reply to reply SMS to the addresser;  
Select Forward to edit present message in text edit window and forward it to the desired  
number; related operation is seen in 4.1.1;  
Select Move to my folder transfer the message to my folder in order to use it again.  
Select Delete to delete present message and return to inbox.  
Select Delete all to delete all the messages and return to the message window.  
In the process of reading, press Options to select Read you can:  
Select Reply to reply the addresser;  
Select Forward to edit present message in text edit window and forward it to the desired  
number; related operation is seen in 4.1.1;  
Select Call to call number of addresser;  
Select Delete to delete present message and return to inbox (if inbox is empty, return to  
message window);  
Select Save number to save sender number;  
Select Extract number to extract the number from the message and save it to contacts or call;  
refer to chapter 3.1.1.  
Select Copy to phone/SIM to copy the current message to phone/SIM.  
26 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
4.1.3 Outbox  
“Outbox” is to view the details of messages which failed sending, activate Options key to  
operate as follows:  
Select Resend to resend the message;  
Select Read to read the message you selected;  
Select Delete to delete current message and back to “Outbox”, (If “Outbox” is empty, it will  
back to the screen of message.).  
Select Delete all to delete all the messages and back to message window;  
In the process of reading, press Options you can:  
Select Send to resend the message;  
Select Edit to access the edit screen of message and edit the message, refer to chapter 4.1.1;  
Select Delete to delete current message and back to “Outbox”, (If “Outbox” is empty, it will  
back to the screen of message.).  
4.1.4 Sent  
You can view sent messages, activate Options:  
Select Read to read the message you selected;  
Select Forward to edit present message in text edit window and forward it to the desired  
number; related operation is seen in 4.1.1;  
Select Move to my folder to transfer the message to my folder in order to use it again. Related  
operation is seen in 4.1.6;  
Select Delete to delete present message and return to outgoing message window.  
Select Delete all to delete all the messages and return to outgoing message window.  
In the process of reading, press Options you can:  
Select Forward to edit present message in text edit window and forward it to the desired  
number; related operation is seen in 4.1.1;  
Select Delete to delete present message and return to outgoing message window (if Sent is  
empty, return to message window).  
4.1.5 Drafts  
“Drafts” is store the messages which have not been edited or unsent, then activate Options  
key to operate as follows:  
Select Read to read the message you selected;  
Select Edit to access the edit screen of message and edit the message, refer to chapter 4.1.1;  
Select Delete to delete current message and back to “Drafts”, (If “Drafts” is empty, it will  
back to the screen of message.);  
Select Delete all to delete all the messages and back to the screen of message;  
In the process of reading, press Options you can:  
Select Edit to access the edit screen of message and edit the message, refer to chapter 4.1.1;  
Select Delete to delete current message and back to “Drafts”, (If “Drafts” is empty, it will  
back to the screen of message.);  
27 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
4.1.6 My folder  
“My folder” is to store messages delivered from inbox and sent, activate Options key to  
operate as follows:  
Select Read to read the message you selected;  
Select Delete to delete current message and back to “My folder”, (If “My folder” is empty, it  
will back to the screen of message.);  
Select Delete all to delete all the message and back to “My folder”, (If “My folder” is empty,  
it will back to the screen of message.);  
In the process of reading, press Options you can:  
Select Edit to access the edit screen of message and edit the message, refer to chapter 4.1.1;  
Select Forward to edit present message in text edit window and forward it to the desired  
number; related operation is seen in 4.1.1;  
Select Delete to delete current message and back to “Drafts”, (If “Drafts” is empty, it will  
back to the screen of message.);  
4.1.7 Settings  
This function is to set parameter related to the operation of message such as SMS center,  
Validity period, Delivery report, Storage location.  
SMS center  
If supporting this service, the number of SMS center will be provided by your network  
operator.  
Validity period  
The maximum time to store the messages has 4 options: 12 hours, 1 day, 1 week and max.  
Delivery report  
The function is to confirm whether the other side has received the message. If closing it, the  
function is invalid.  
Storage location  
The save location of messages can be selected including SIM and phone. The storage  
capacity of SIM card is limited, but when phone fails, the SIM card can be installed into other  
phone. The storage capacity of phone is comparatively large, but when it fails all information can  
not be exported.  
4.1.8 Voice mail  
Voice mail service is network dependent and you can subscribe this service from your service  
provider.  
The Voice mail centre number must be set before using this service.  
With the Message screen displayed, highlight Voice mail and press Sl to display the Voice  
mail screen.  
Select Answer: Enter dialing screen to dial number in voice mail and listen records.  
Select Edit: to set your Voice mail centre number (contact your service provider for details of  
your Voice mail centre number).  
28 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
4.1.9 Memory status  
This function displays storage status for SMS, including phone and SIM card.  
4.2 Cell broadcast  
Cell broadcast is a kind of network service which helps you receive the messages such as  
weather or traffic and so on. Before use this service, the channel number provided by the service  
supplier must be set. Select the message window and roll the scroll bar to make the choice of “Cell  
broadcast”, then press “OK” to enter the window of “Cell broadcast”.  
Select Receive: enter the receiving window of message to choose the receiving function of  
message On/Off.  
Select Channel list: you may customize the channel for receiving the cell broadcast. Select  
Channel list, press “Select” to enter the window of channels list. If you have been set any channel,  
it shows the channel list; if not, it shows none. Activate “Options” to select Add enter the window  
of editing the channel, input the number from the service supplier, then press “LSK” to confirm  
the content inputted, or press “Back” to exit the edit window without editing. Select the channel  
which has been set, press “Options”, within the pop-up function menu, to select Edit modify the  
current channel; select Delete to delete the channel selected.  
The function is to confirm whether the other side has received the message. If closing it, the  
function is invalid.  
29 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
5 Call history  
The call record covers recently missed/answered/outgoing calls and call duration as well as  
the function of deleting records.  
If the mobile phone is unlocked on idle screen, press Snd key to view recent dialed calls.  
On the screen of Call history, you may view time, call duration, phone number and the  
number of incoming and outgoing calls for missed/answered/outgoing calls (Call duration includes  
in the detailed information.).  
5.1 Missed calls  
The operation of Missed calls is same as Outgoing calls.  
5.2 Answered calls  
The operation of Answered calls is same as Outgoing calls.  
5.3 Outgoing calls  
On the screen of Outgoing calls, press Options key to activate the menu for operating the  
call record selected as follows:  
Select View detail to view the call detail information; including the name (If the number  
have been save in contacts.), number, time, date, call duration, No. of times(the first view);  
Select Call to dial out the phone number selected;  
Select Send SMS to perform the function of SMS, refer to chapter 4.1.1;  
Select Save to save the necessary numbers to contacts, refer to chapter 3.1.1;  
Select Delete to delete the current record selected;  
Select Delete all to delete all records of outgoing calls;  
On the screen of View details, activate Options key to operate as follows:  
Select Call to dial out the phone number selected, refer to chapter 1.7.2;  
Select Send SMS to perform the function of SMS, refer to chapter 4.1.1;  
Select Save to save the necessary numbers to contacts, refer to chapter 3.1.1;  
Select Delete to delete the current record selected.  
5.4 Call duration  
On the screen of Call duration, you may view: duration for the last call, total duration for  
outgoing &answered calls and total call duration.  
Press Clear key to clear call duration to zero, and press OK key to confirm; the system will  
prompt correspondingly, or press Cancel key to exit from current operation.  
30 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
6 Profiles  
Phone modes are a group of preset characteristic definition, which is easy and quick to start.  
The mobile phone provides a group of default modes including Normal, Meeting, Outdoor and  
Silent. Every mode has a set of default value, and the user can change and save the mode  
according to ones favorite.  
After the desired working mode is selected, the current working mode of mobile phone will  
set completely according to the selected mode. Activate Options key to have the options as  
following:  
Activate: to active the mode;  
Volume: to tune the volume of ring tone and receiver, select the content needed to set, and  
press OK key to enter the corresponding adjusting screen. Use U and D key to tune up/down  
the volume of ring tone for incoming calls. Press LSK to confirm and prompt “Set  
successfully! ”;  
Ringer type: to set all prompt modes including Incoming call, SMS, Schedule and Alarm.  
For example, if hope no ring prompt exists during the daily working, only press LSK key to  
select the setting, then select LSK to finish it with confirm.  
The mobile phone will prompt “Set successfully!”;  
Key tone: to set the key tone on/off;  
Power on tone: to set the tone of power on on/off.  
31 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
7 Settings  
7.1 Phone settings  
“Phone settings” is to set the service status of mobile phone, which includes Ring tone、  
Date&timeLanguageBacklight and Auto key lock.  
7.1.1 Ring tone  
In the screen of “Ring tone” to set the prompt tone for Incoming call, SMS, Alarm and  
Schedule. Select the item which is needed to set, and enter the selecting screen of ring tone, press  
Options as follow and press Back to return previous screen:  
Select Play to play current ring tone;  
Select Set to confirm.  
7.1.2 Date &time  
For the time, date, and corresponding forms of setup, use the key of U or D to select the content,  
press the LSK to confirm the content needed to change.  
TimeAll you input the correct time with 12/24 hours  
FormatAdjust the format to show the time.  
DateAll you input the correct date.  
FormatSet up the format to show the date.  
7.1.3 Language  
In the window of “Language”, there are two choices namely French and Englishuse UD  
key to select view the effect when settingpress OK or tap the corresponding menu, confirm the  
content needed to modify; press Back to cancel the content selected.  
7.1.4 Backlight  
Set the background Backlight tine among 10 s20s30 s60 spress OK to confirm the  
content selected. Press Back to cancel the content selected.  
7.1.5 Auto key lock  
“Auto key lock” is to set whether permitting to lock phone automatically or not. Select On the  
system will lock phone when the brightness off; select Off the system will not lock phone anytime.  
Time: to set the time of lock automatically with 10s, 20s and 30s.  
7.2 Call settings  
“Call settings” is to confirm whether to use the call function or not. When entering the  
function, it will always show the practical setting.  
32 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
7.2.1 Any key answer  
“Any key answer” is to press any key for answering the call (Except power key and RSK).  
7.2.2 Call diversion  
“Call diversion” is to transfer calls to the specified phone according to your request.  
Within the setting of “Call diversion”, its success depends on network and SIM card. Mobile  
phone will prompt the setting properly.  
When setting the option, you need to input the correct phone number for correctly  
transferring the call to the specified phone. If it is failed, please check the transferred number set  
in the mobile phone is correct or not.  
Unconditional when the option is set, all calls will be transferred to the specified number;  
Busy when the option is set, the incoming call will be transferred to the specified number  
when your mobile phone is busy;  
No reply when the option is set, the incoming call will be transferred to the specified number  
when you do not answer the call;  
Unreachable when the option is set, the incoming call will be transferred to the specified  
number when you are not in the service area (For example, when the network signal is not good or  
the signal environment is very poor);  
Cancel diverts to select the call diversion which is needed to cancel, press LSK key to cancel  
the diversion, press Back key to the return the last menu;  
Status to view the diversion status of all current calls.  
7.2.3 Call waiting  
“Call waiting” is to set whether permitting the call waiting or not. If it is closed, the phone is  
busy. For example, when the third part is calling and it hears the busy tone.  
7.2.4 Auto Redial  
“Auto redial” is to set whether permitting to redial automatically or not. Select On the system  
will redial when the dialed call does not get through; select Off the system will not redial when the  
dialed call does not get through.  
7.2.5 Auto answer  
“Auto answer” is to set whether permitting to answer automatically or not. (Only under the  
case of inserting the earphone)  
Select On the system will answer the incoming call automatically;  
Select Off the function is invalid.  
33 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
7.2.6 Flash dial  
“Flash dial” can be set in the mobile phone. This is to use the number key of 29 to  
represent different phone number. When using on the idle screen, long press some certain number  
of 29 to dial the corresponding number. If the number key is not set with the phone number, the  
mobile phone will prompt “Phone number empty”.  
After enter the screen of setting the quick dial, there is different prompt for various situation  
of setting quick dial according to the number key selected. If the number key has been set as quick  
dial, the bottom of mobile phone will display the number and contact person specified; if not, it  
will display “Not set”.  
Select Delete to delete the existed number and reset the new number.  
When setting the new number, using the way of inputting the numbers manually or browsing  
the contacts to obtain the desired number, and put it into the specified number key of quick dial for  
convenient use. After completing, the mobile phone will automatically determine that the selected  
number exists in the phone or not. If strange, only the number is displayed to give you the correct  
prompt as possible.  
When the number key with the cursor is set as quick dial, the current icon is fitted and the  
bottom of mobile phone will prompt the specified number and contact person; if the cursor does  
not exist the specified key of quick dial, the fit does not exist over the number.  
7.2.7 Minute reminder  
Set up the open or close of minute prompt. If the function is started, there will be minute  
prompt in the process of call. If closed, then there is no minute prompt at all.  
7.2.8 Connection tone  
“Connection tone” is to set the connection prompt on off. If it is on, there will be connection  
prompt in the process of call. If off, then there is no connection prompt at all.  
7.3 Security  
The menu of “Security” includes the following settings: Call barringSIM password.  
7.3.1 Call barring  
The network operators will provide you with a 4-digit password to enable or disable this  
function.  
Incoming calls:  
When roaming: Reject all incoming calls when roaming.  
Incoming calls: Reject all incoming calls.  
Outgoing calls:  
International: All outgoing international calls cannot be dialed out;  
Local calls: Only local calls can be dialed out;  
Outgoing calls: All calls cannot be dialed out.  
Cancel all:  
34 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
Cancel all: Cancel all the call barring  
Modify password:  
You can change the restriction password provided by the network.  
7.3.2 SIM password  
“SIM password” is to the SIM password on/off and the change of PIN code.  
PIN lockto enable PIN code of SIM card. When it is on, you must enter PIN code to power  
on or you are only allowed to make 112 emergency calls; to disable PIN code of SIM card. When  
it is off, you do not need to enter PIN code to power on.  
Change PINto change PIN code and set it your accustomed code number. Please notice the  
change must be set under the case that PIN code is on.  
Note: PIN code is relative with SIM card and it is the operational password of SIM card.  
7.4 Network  
When your mobile phone is roaming abroad, you need to select the network for it to connect  
the international GSM network. Generally, you can select the network mode of auto select (see  
below), or you also can select to search the available network automatically or manually (see  
below). If you attempt to connect a network which does not have the valid roaming agreement you  
local network, the mobile phone will prompt “Registration failed!”.  
7.4.1 Current network  
To display the name and ID of current network. Press Back to return previous screen.  
7.4.2 Auto select  
Your mobile phone will search the original network first, and then search through the  
network list in SIM card. If there is no available network, any network which has the valid  
roaming agreement with your local network will be connected.  
7.4.3 Manually select  
Your mobile phone will scan for available network and provide you with the list of current  
network. You can select the preferred network, and the phone will prompt such information as  
successful or failed during the connection with network.  
7.5 Reset  
“Reset” is to resume all original default value. After selecting, the system will prompt “Master  
reset?”. After confirming, the system resumes the default value and prompts “Master reset in  
progress”. Using this function will not clear the data of contacts and message saved by you own. It  
only changes the setting of the working environment, such as the selection of ring tone and phone  
modes, etc.  
35 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
8 Accessories  
8.1 Alarm  
There are three alarms which can be set. The function and operation of three alarms are  
completely same. You can set the alarm clocks on/off.  
8.1.1 Alarm on  
The user highlights an alarm and press OK key to view the status and the detailed settings. If  
you want to alarm on, first to confirm the alarm time is right. For instance, if you attempt  
alarm on at 00:00, to select “Time” on the display screen to enter the screen of Time setting,  
input the time needed using the number keys, then press LSK key to confirm.  
Secondly you need to conform Period is right. If not set the item, the alarm works once. If to  
set others, enter the item of “Period”, including four options:  
Oncethe alarm only works once and then it will be off;  
Dailythe alarm works at the same time everyday;  
Working daythe alarm works at the same time from Monday through Friday;  
Weekendthe alarm works at the same set time only on Saturday &Sunday;  
Select Name: to rename of the alarm as ones favorite.  
8.2 Alarming  
When the set time is reached, the phone will play the alarm tone (If the setting is on.) and  
display the alarm time on the screen.  
Even if the phone is power off, the phone still works. At this time, press Cancel (RSK) or  
power key to stop the alarm, and it will prompt “Power on?”. Select Yes to power on, Select  
No to exit the screen.  
Please notice if the date and time have changed the alarm still works as the original time.  
Therefore, please confirm the alarm date and time changed for next time.  
36 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
8.3 Schedule  
8.3.1 Schedule  
After entering the Schedule, the monthly Schedule for current date will be displayed. Use U,  
D keys to select the preferred date, and the Gregorian Schedule year &month of specified date  
display on the bottom right of corner of screen. Any date with event record will be represented in  
black. Press LSK key to activate the menu, which coversEnter dateCreateAgenda and  
Memory status.  
8.3.2 Enter date  
Enter the edit screen of date, input day /month/ year that you needed, then press LSK key to  
confirm, press Back to schedule screen.  
8.3.3 Create  
“Create” is used to add new events, and you need to input the relevant date & time for events,  
then to set date and time for reminding.  
On the screen of Schedule and event Schedule, press Options key to activate the menu,  
The setting of new events covers the following contents:  
DateRefer to the date to be reminded for event, which may be set by entering the date with  
number keys;  
TimeRefer to the time to be reminded for event, which may be set on the screen of “Time”;  
MemoRefer to the description of event, with contents to be input on the screen of edit, refer  
to section 1.6;  
PeriodRefer to the period of event;  
StatusRefer to make the schedule item on/off.  
8.3.4 Agenda  
Simply press LSK to enter schedule list box, which is used to check all schedulers. Activate  
the key Options for following operations:  
Viewto view the content of selected scheduler;  
Createto add a new scheduler;  
Deleteto delete the selected scheduler;  
Delete all: to delete all the selected scheduler.  
8.3.5 Memory status  
Within the status of “Memory status”, the free/total number of schedule items is displayed,  
and press Back key to back to schedule screen.  
37 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
8.4 Calculator  
Using calculator can do the arithmetic including addition, subtraction, multiplication and  
division. After entering the screen of calculator, you may directly input the number to account,  
and the number and character input will display on the screen of edit:  
Take the calculation of 123456789x7.2 as an example:  
First stepenter digits “123456789”and press or press Options operation “Negative” to  
change between positive and negative;  
Second steppress Options operation “Multiply” in options;  
Third stepenter digit “7.2”whereby the dot can be made by * or Options operation  
“Decimal”;  
Fourth steppress Options operation “Equals” in options;  
The result will display on the bottom line.  
Activate the key Options to select:  
Press Delete to delete the content one by one on the edit screen, and press Back key to back  
previous screen.  
Press Delete all to delete the whole content on the edit screen.  
In case that the calculation of number which is divided by zero produces a result over zero, or  
the result is above 999999999 or below -999999999the prompt “E” shall occur to indicate an  
error.  
8.5 Games  
8.5.1 Brick  
The screen is divided into two regions: the game zone and the suggested zone. Brick is  
standards, 9 species program. After each trip filled and eliminate points, and erasing the line a few  
more, plus a fraction more and more. If the cubes is to the top cumulative result of the new  
whereabouts were unable to block the end of the game. Suggested areas given the current scores  
and the next a square shape. The game is adjustable difficulty.  
38 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
9 STK  
STKSIM TOOL KITallows to operate its own software based on SIM card. STK card can  
receive and send short message data of GSM. This mobile phone supports the service for various  
network operators.  
39 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
10 Common questions  
The mobile phone can not power on.  
The phone can not make call and power off due to lower battery. Please charge the battery.  
The mobile phone can not to dial some calls.  
The Call barring has been set, which restricts the use of mobile phone, please check and  
cancel it.  
Someone else is answering my call.  
The mobile phone has been set to transfer your call to another number, please check and cancel  
it.  
The Display information  
During the operation, the mobile phone may prompt the display information due to following error  
operations:  
”Insert SIM card”  
SIM card must be inserted into mobile phone before used, or taken out (If already exists) for  
cleanup the golden area with dry cloth and then insert again.  
” Network not available”  
Your mobile phone is out of the area covered by network (or the physical barrier might exist  
between your phone and transmitter), and unable to dial or answer calls. Please close to the  
window if indoors.  
”Emergent call only”  
If your mobile phone is out of the area covered by network of service supplier, and another  
network within your area may allow you to dial emergent call subject to the intensity of  
signal.  
” Invalid SIM card”  
The SIM card has been locked, which is unable to accept the SIM card inserted. Please insert  
correct SIM card or contact with the distributor.  
”Enter PUK code”  
SIM card has been locked due to the wrong input of PIN code for three times continuously.  
Therefore, you must apply a special eight-digit PUK code from the network supplier to  
unlock the SIM card (PUK code may be supplied with PIN code at same time).  
Warning: If input wrong PUK code for ten times continuously, SIM card will be locked  
permanently. You must apply a new SIM card from the network supplier.  
40 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
11 Fittings  
Charger  
-
It will charge the Li battery quickly and completely. The charge duration varies subject to the  
capacity of battery.  
Li battery (Two pieces)  
-
The Li battery xxxmAh can provide the standby duration lasting for XXX-XXX hours or call  
duration lasting for XX-XXX hours subject to practical using condition.  
Note: Only the approved battery, charger and other accessories by  
manufacturer of mobile phone may be used. Using other types of  
accessories will infringe the approval and warranty of this mobile  
phone and cause the danger.  
41 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
M101 User manual  
12 Maintenance guideline  
Welcome to use mobile phone produced by Haier Company. Whereby a failure occurs in the  
use of your mobile phone, you are requested to contact with distributor or consult Haier  
maintenance center; whereby the repair is neededyour mobile phone may be sent/brought to local  
maintenance centerThe specific maintenance centers shown in the voucher of warranty provided  
with mobile phone.; whereby a maintenance center is not available in your placeyou are  
requested to bring the mobile phone and copy of its receipt to distributor for EMS mailing.  
You shall be cautious to the use of mobile phone as it is made using excellent design and  
technique. To prolong the life of mobile phone, you are required to perform the obligations specified in  
the warranty terms as follow:  
·Keep the mobile phone and its accessories away from the children;  
·Keep the mobile phone dry all t he time as rain water, moisture, various liquid, and water contain  
mineral materials, which may corrode the electronic circuit.  
·Do not use, store the mobile phone in places containing dusts, which may damage its removable  
parts;  
·Do not store the mobile phone in the excessive hot place, as the high temperature might shorten  
the life of electronic parts, damage the battery, and deform or even melt some plastic parts;  
·Do not store the mobile phone in the excessive cold place, or the humidity may form inside of the  
mobile phone when the temperature of mobile phone risesup to normal temperature, which  
may damage the circuit board;  
·Do not attempt to disassemble the mobile phone as the operation by unprofessional personnel will  
damage it;  
·Do not throw, beat or shake the mobile phone, or the internal circuit board might be damaged;  
·Do not clean and wash the mobile phone with strong chemical product, abluent, or strong  
detergent;  
· Do not dye the mobile phone, or it will obstruct the removable parts so as to affect the normal  
work;  
· To change the antennaonly authorized or match able antenna shall be used. Any use of  
unauthorized antenna or modified accessories may damage the mobile phone and infringe the  
relevant regulations for wireless devices.  
All above recommendations are also applicable to your mobile phone, battery, charger and each  
fitting part. If they can not work normally, please bring/send them to the qualified maintenance  
organization nearest to you for repairing.  
42 页  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Graco Safety Gate 9651 User Manual
Gravely Snow Blower 20980 User Manual
Hamilton Beach Coffeemaker 40915 User Manual
Hans Grohe Indoor Furnishings 35115801 User Manual
Hasbro Two Way Radio 59859 User Manual
Heath Zenith Home Safety Product SL 4190 Series User Manual
Hotpoint Cooktop CEO 647 Z User Manual
Hotpoint Cooktop CIO 640 DD Z User Manual
HP Hewlett Packard Server 721546 001 User Manual
iHome Stereo System IP39 User Manual