Haier Air Conditioner 0010518526 User Manual

SPLIT TYPE ROOM AIR CONDITIONER  
OPERATION MANUAL  
HSU-09HEA03/(BP)  
HSU-12HEA03/(BP)  
Please read this operation manual before using the air conditioner.  
0010518526  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions  
7. The appliance is not intended for use  
by young children or infirm persons  
without supervision.  
Do not obstruct or cover the ventilation  
grille of the air conditoner.Do not put fingers  
or any other things into the inlet/outlet and  
swing louver.  
8.Young children should be supervised  
to ensure that they do not play with  
the applience.  
Do not allow children to play with the air  
conditioner.In no case should children be  
allowed to sit on the outdoor unit.  
9.Please employ the proper power plug,  
which fit into the power supply cord.  
Specifications  
10 .The power plug and connecting cable  
must have acquired the local attestation.  
The refrigerating circuit is leak-proof.  
The machine is adaptive in following  
situation  
11.In order to protect the units,please turn  
off the A/C first, and at least 30 seconds  
later, cutting off the power.  
1.Applicable ambient temperature range:  
32oC/23oC  
18oC/14oC  
Maximum:D.B/W.B  
Indoor  
Minimum:D.B/W.B  
Cooling  
43oC/26oC  
Maximum:D.B/W.B  
Outdoor  
Indoor  
18oC  
Minimum:D.B  
27oC  
15oC  
Maximum:D.B  
Minimum:D.B  
Heating  
24oC/18oC  
-7oC/-8oC  
Maximum:D.B/W.B  
Minimum:D.B/W.B  
Outdoor  
2. If the power supply cord is damaged, it  
must be replaced by the manufacturer  
or its service agent or a similar qualified  
person.  
3. If the fuse of indoor unit on PC board is  
broken,please change it with the type of  
T. 3.15A/ 250V.  
4. The wiring method should be in line with  
the local wiring standard.  
5. After installation, the power plug should  
be easily reached.  
6. The waste battery should be disposed  
properly.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and Functions  
Indoor Unit  
Outlet  
Display board  
Inlet  
Air filter(inside)  
Air Purifying Filter  
(inside)  
Power plug  
Inlet grille  
Horizontal flap  
(adjust up and down air flow.  
Don't adjust it manually)  
Anion generator  
(inside)  
Vertical blade  
(adjust left and right air flow)  
Actual inlet grille may vary from the one shown in the manual according to  
the product purchased  
Outdoor Unit  
HSU-09HEA03/(BP)  
HSU-12HEA03/(BP)  
OUTLET  
INLET  
CONNECTING PIPING AND ELECTRICAL WIRING  
DRAIN HOSE  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and Functions  
Display board  
Remote controller  
1
6
7
8
9
10  
11  
5
2
3
4
ON  
OFF  
A
U
T
O
AM  
PM  
oC  
4
25  
26  
9
1
1
8
5
7. SIGNAL SENDING display  
8. TIMER OFF display  
9. TIMER ON display  
10. CLOCK display  
ON/OFF  
TEMP  
11. TEMP display  
12  
13  
12. POWER ON/OFF  
19  
20  
Used for unit start and stop.  
MODE  
FAN  
SET  
13. MODE  
Used to select  
COOL,DRY,HEAT operation  
14. FAN  
TIMER  
Used to select fan speed AUTO, HI, MED, LO  
21  
22  
15. HOUR  
14  
15  
Used to set clock and timer setting.  
16. SWING  
CLOCK  
POWER/SOFT  
RESET  
SWING  
Used to set auto fan direction.  
16  
17. POWER/SOFT button  
HEALTH  
18. LOCK  
17  
24  
Used to lock buttons and LCD display.  
19. TEMP.  
Used to select your desired temp.  
LOCK  
20. SET  
18  
23  
Used to confirm timer and clock settings.  
21. TIMER  
Used to select TIMER ON, TIMER OFF,  
1. Operation mode display  
COOL DRY  
HEAT  
Operation mode  
Remote controller  
Display board  
22. CLOCK  
Used to set correct time  
23. RESET  
Used to reset the controller back to  
normal condition.  
24. HEALTH  
2. SWING display  
Used to operate the healthy function  
3. FAN SPEED display  
4. HEALTH display  
5. POWER/SOFT display  
MED  
LO  
AUTO  
HI  
25.  
Singal receiver hole  
26. Ambient temp.display  
When receiving the remote control signal, display the set  
temperature and in the rest time the room temperature is  
displayed and this room temperature is only for reference.  
6. LOCK display  
Clock set  
When unit is started for the first time and after replacing batteries in remote controller,  
clock should be adjusted as follows:  
Press CLOCK button, "AM" or "PM" flashes.  
Press or to set correct time. Each press will increase or decrease 1min. If the  
button is kept depressed, time will change quickly.  
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock starts working.  
NOTE: Cooling only unit do not have displays and functions related with heating  
The unit do not have functions related with healthing.  
Hints  
After replacing with new batteries, remote controller will conduct self-check, displaying  
all information on LCD. Then, it will become normal.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Remote controller's operation  
When in use, put the signal transmission head directly to the  
receiver hole on the indoor unit.  
The distance between the signal transmission head and the  
receiver hole should be within 7m without any obstacle as well.  
Don't throw the controller, prevent it from being damaged.  
When electronic-started type fluorescent lamp or change-over  
type fluorescent lamp or wireless telephone is installed in the  
room, the receiver is apt to be disturbed in receivering the signals  
so the distance to the indoor unit should be shorter.  
Loading of the battery  
Load the batteries as illustrated. 2 R-03 batteries, resetting key (cylinder)  
Remove the battery cover:  
Slightly press " " and push down the cover.  
ÇëÑ¡ÓÃͬһƷÅÆÁ½½Ú  
7#  
µç³Ø,³¤Ê±¼ä²»ÓÃʱ,Ϊ  
·Àֹ©ҹÇ뽫µç³ØÈ¡  
ÇëÑ¡ÓÃͬһƷÅÆÁ½½Ú  
7#  
µç³Ø,³¤Ê±¼ä²»ÓÃʱ,Ϊ  
·Àֹ©ҹÇ뽫µç³ØÈ¡  
³ö¡£  
ÔÚʹÓÃÖÐÈçÓöÒì³£,Çë  
³ö¡£  
ÔÚʹÓÃÖÐÈçÓöÒì³£,Çë  
½«µç³ØÈ¡³ö,6·ÖÖÓºóÔÙ  
×°Èëеç³Ø¡£  
½«µç³ØÈ¡³ö,6·ÖÖÓºóÔÙ  
×°Èëеç³Ø¡£  
º£¶û¼¯ÍÅÇൺº£¶û  
º£¶û¼¯ÍÅÇൺº£¶û  
¿Õµ÷Æ÷ÓÐÏÞ×ܹ«Ë¾  
¿Õµ÷Æ÷ÓÐÏÞ×ܹ«Ë¾  
Load the battery:  
Be sure that the loading is in line with the" + "/"-"  
pole request as illustrated.  
Put on the cover again  
Confirmation indicator:  
In disorderation, reload the batteries or load the new batteries after 6mins.  
Note:  
Use two new same-typed batteries when loading.  
If the remote controller can't run normally or doesn't work at all,  
use a sharp pointed item to press the reset key.  
Hint:  
Remove the batteries in case unit won't be in usage for a long period.  
If there are any display after taking-out just need to press reset key.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Cool Operation  
(1) Unit start  
Press ON/OFF button, unit starts.  
Previous operation status appears on display. (Not Timer setting)  
(2) Select operation mode  
Press MODE button. For each press, operation  
mode changes as follows:  
ON/OFF  
TEMP  
COOL  
DRY  
HEAT  
1
4
MODE  
SET  
Unit will run in operation mode displayed on LCD.  
Stop display at your desired mode.  
2
FAN  
TIMER  
3
(3) Select temp. setting  
SWING  
CLOCK  
Press TEMP button.  
Every time the button is pressed, temp. setting increases 1oC  
Every time the button is pressed, temp. setting decreases 1oC  
Unit will start running to reach the temp. setting on LCD.  
HEALTH  
POWER/SOFT  
RESET  
LOCK  
(4) Fan speed selection  
Press FAN button. For each press, fan speed changes  
as follows:  
Remote controller:  
HI  
MED  
LO  
AUTO  
Air conditioner is running under displayed fan speed.  
Air conditioner is running under displayed fan speed.  
(5) Unit stop  
Press ON/OFF button, the unit stops.  
Hints  
On cooling only unit, heating mode is not available.  
Remote controller can memorize each operation status. When starting it next time,  
just press ON/OFF button and unit will run in previous status.  
No reelecting is needed.(TIMER ON/OFFSWING needs reelecting)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Heat Operation  
(1) Unit start  
Press ON/OFF button, unit starts.  
Previous operation status appears on display. (Not Timer setting)  
(2) Select operation mode  
Press MODE button. For each press, operation  
mode changes as follows:  
HEAT  
COOL  
DRY  
ON/OFF  
TEMP  
Unit will run in operation mode displayed on LCD.  
Stop display at your desired mode.  
3
1
5
3
MODE  
SET  
2
(3) Select temp. setting  
Press TEMP button.  
FAN  
TIMER  
Every time the button is pressed, temp. setting increases 1oC  
Every time the button is pressed, temp. setting decreases 1oC  
Unit will start running to reach the temp. setting on LCD.  
4
SWING  
CLOCK  
POWER/SOFT  
RESET  
HEALTH  
(4) Fan speed selection  
Press FAN button. For each press, fan speed changes  
LOCK  
as follows:  
Remote controller:  
HI  
MED  
LO  
AUTO  
IN HEAT mode, warm air will blow out after a short period  
prevention function.  
of the time due to cold-draft  
(5) Unit stop  
Press ON/OFF button, the unit stops.  
Hints  
Remote controller can memorize each operation status. When starting it next time,  
just press ON/OFF button and unit will run in previous status.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Dry Operation  
(1) Unit start  
Press ON/OFF button, unit starts.  
(2) Select operation mode  
Press MODE button. For each press, operation  
mode changes as follows:  
HEAT  
COOL  
DRY  
ON/OFF  
TEMP  
Unit will run in operation mode displayed on LCD.  
Stop display at your desired mode.  
3
1
6
3
MODE  
SET  
(3) Select temp. setting  
Press TEMP button.  
2
FAN  
TIMER  
Every time the button is pressed, temp. setting increases 1oC  
Every time the button is pressed, temp. setting decreases 1oC  
Unit will start running to reach the temp. setting on LCD.  
4
SWING  
CLOCK  
5
POWER/SOFT  
HEALTH  
(4) Fan speed selection  
Press FAN button. For each press, fan speed changes  
as follows:  
LOCK  
RESET  
HI  
MED  
LO  
AUTO  
COOL operation starts when room  
temp. is higher than temp. setting.  
Ultra-low air flow  
Temp. setting+2oC  
Temp. setting  
Unit runs at the speed displayed on LCD.  
In DRY mode, when room temperature becomes  
lower than temp.setting+2oC,unit will run intermittently  
at LOW speed regardless of FAN setting.  
On reaching temp. setting, unit  
will run in mild DRY mode.  
Hints  
Remote controller can memorize each operation status. When starting it next time,  
just press ON/OFF button and unit will run in previous status.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
(5) Air flow direction adjustment  
After operation mode is selected, horizontal flap will open automatically according to the mode.  
Referring to the Fig.  
COOL  
About 10o  
Up and down (Use remote controller)  
Press SWING button, horizontal flap will move  
within the range shown in the Fig. Press SWING  
button stop it at a fixed position.  
Left and right air flow adjustment  
(manual)  
Move the vertical blade by a knob on air  
conditioner to adjust left and right direction  
referring to Fig.  
About 10o  
About 45o  
COOL  
Cautions:  
It is advisable not to keep horizontal flap at  
Cautions:  
When humidity is high, condensate water  
might occur at air outlet if all vertical  
louvers are adjusted to left or right.  
downward position for a long time in COOL  
or DRY mode, otherwise, condensate  
water might occur.  
Cautions:  
(6) Unit stop  
Unit won't restart until 3 minutes have  
elapsed, due to system protection.  
Press ON/OFF button.  
Only time remains on LCD.  
All indicators on indoor unit go out.  
Horizontal flap closes automatically.  
Hints  
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more  
helpful for a better air circulation.  
Be careful not to catch a cold when cold air blows downward.  
It is harmful to your health in summer to go frequently in and out of places where temp.  
difference is above 7oC. Temp. difference of 3-5oC will remove your fatigue.  
More than this, unit's load can be reduced and power consumption cut down as well. So, you'd  
better set a temp. difference of 3-5oC between indoor and outdoor temp. in COOL mode.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
TIMER Operation  
Set Clock correctly before starting Timer operation  
You can let unit start or stop automatically at following times: Before you wake up in the  
morning, or get back from outside or after you fall asleep at night.  
TIMER ON/OFF  
(1)After unit start, select your desired operation mode.  
Operation mode will be displayed on LCD.  
Power indicator on indoor unit lights up.  
(2)TIMER mode selection  
ON  
Press TIMER button to change TIMER mode.  
Every time the button is pressed, display changes as follows:  
blank  
ON/OFF  
TEMP  
ON  
OFF  
TIMER ON TIMER OFF  
1
MODE  
Select your desired TIMER mode (TIMER ON or TIMER  
OFF) ON or OFF will flash.  
SET  
3
4
FAN  
TIMER  
(3)Timer setting  
3
Press HOUR  
/
button.  
2
SWING  
CLOCK  
Every time the button is pressed, time increases 1 hour.  
If button is kept depressed, time will change quickly.  
Every time the button is pressed, time decreases 1 hour.  
If button is kept depressed, time will change quickly. Time  
will be shown on LCD. It can be adjusted within 24 hours.  
HEALTH  
POWER/SOFT  
LOCK  
RESET  
(4)Confirming your setting  
After setting correct time, press SET button to confirm, "ON"  
or "OFF" stops flashing  
Time displayed: Unit starts or stops at x hour . (TIMER ON or  
TIMER OFF).  
Timer mode indicator on indoor unit lights up.  
To cancel TIMER mode  
Just press TIMER button several times until TIMER mode disappears.  
Hints  
After replacing batteries or a power failure happens, Time setting should be reset.  
Remote controller possesses memory function, when use TIMER mode next time, just  
press SET button after mode selecting if timer setting is the same as previous one.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
POWER/SOFT Operation  
POWER Operation  
When you need rapid heating or cooling, you can use  
this funciton.  
ON/OFF  
TEMP  
Selecting of POWER operation  
Press POWER/SOFT button. Every time the button is  
pressed,display  
MODE  
FAN  
SET  
changes as follows:  
BLANK  
TIMER  
SOFT  
POWER  
Stop the display at  
SWING  
CLOCK  
In POWER operation status:  
In COOL mode, fan speed automatically runs in HI mode  
for 15 min then returns to original status setting.  
HEALTH  
POWER/SOFT  
To cancel POWER operation  
LOCK  
RESET  
Press POWER/SOFT button twice ,POWER/SOFT disappears.  
SOFT Operation  
You can use this function when silence is needed for rest or reading.  
Selecting of SOFT operation  
Press POWER/SOFT button. Every time the button is pressed,display  
changes as follows:  
BLANK  
SOFT  
POWER  
Stop the display at  
In SOFT operation mode, fan speed automatically takes"LOW"  
To cancel POWER operation  
Press POWER/SOFT button twice ,POWER/SOFT disappears.  
Hints:  
During POWER operation, in rapid COOL mode, the roor  
will show inhomogeneous temperature distribution.  
Long period SOFT operation will cause effect of not too cool.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Emergency operation and test operation  
Emergency Operation:  
Carry out this operation only when the remote controller is defective or lost.  
When the emergency operation switch is pressed, a" Pi "sound starts once, which  
means the start of this operation.  
In this operation, it is not possible to change the  
settings of temperature and air flow speed, it is  
also impossible to do an operation by the timer.  
Follow the requirements below.  
Pi  
Room  
Timer  
mode  
Designated  
temperature  
Air flow Operation  
temperature  
speed  
mode  
COOL  
HEAT  
More than 23oC  
Less than 23oC  
26oC  
23oC  
CONTINUOUS AUTO  
CONTINUOUS AUTO  
If an air conditioner is a model for both cooling and heating.  
Cooling when the room temperature at the start of operation is above 23oC.  
Heating when the room temperature at the start of operation is below 23oC  
Test operation:  
Pi Pi  
Use this switch in the test operation when the room  
temperature is less 16oC, do not use it in the normal  
operation.  
Continue to press the test operation switch for more  
than 5 seconds. After you hear the "Pi" sound twice,  
release your finger from the switch, the cooling  
operation starts with the air flow speed setting "Hi".  
Removal of the restriction of emergency or test operation:  
Press once more the emergency operation switch, or manipulate through the remote  
controller, a "Pi" sound causes the restriction of emergency or test operation to be  
removed.  
When the remote controller is manipulated for the removal, then the selected operation  
by the remote controller.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Replacement of Air Purifying Filter  
1.Open the lnlet Grille  
Prop up the inlet grille by using a small device named  
grille-support which located in the right side of the ind-  
oor unit.  
2.Detach the standard air filter  
Slide the knob slightly upward to release the  
filter, then withdraw it.  
3.Attach Air Purifying Filter  
Put air purifying filter appliances into the  
right and left filter frames.  
Detach old Air Purifying Filter  
4.Attach the standard air filter  
(Necessary installation)  
ATTENTION:  
The white side of the photocatalyst air purifying filter face outside,  
and the black side face the unit.  
The green side of the bacteria-killing medium air purifying filter face outside,  
and the white side face the unit.  
5.Close the Inlet Grille  
Close the Grille surely  
NOTE:  
The photocatalyst air purifying filter will be solarized in fixed time. In normal family,  
it will be solarized every 6 months.  
The bacteria-killing medium air purifying filter will be used for a long time,no need for  
replacement. But in the period of using them ,you should remove the dust frequently  
by using vacuum cleaner or flaping them lightly,otherwise ,its performance will be  
affected.  
Please keep the bacteria-killing medium air purifying filter in the cool and dry conditions  
avoid long time directly sunshine when you stop using it,or its ability of sterilization will  
be reduced.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
For Smart Use of The Air Conditioner  
Setting of proper room  
temperature  
Do not block the air inlet  
or outlet  
Proper  
temperature  
Close doors and windows Use the timer effectively  
during operation  
During cooling operation  
prevent the penetration of  
direct sunlight with  
curtain or blind  
If the unit is not to be used Use the louvers effectively  
for a long time, turn off the  
power supply main switch.  
OFF  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions  
Safety Instruction  
Please read the following Safety Instructions carefully prior to use.  
The instructions are classified into two levels, WARNING and CAUTION according to  
the seriousness of possible risks and damages as follows. Compliance to the  
instructions are strictly required for safety use.  
Installation  
WARNING  
Please call Sales/Service Shop for the Installation.  
Do not attempt to install the air conditioner by yourself because improper works  
may cause electric shock, fire, water leakage.  
lnstallation in a inadequate place may cause accidents. Do not install in the following place.  
CAUTION  
Do not install in the  
place where there is  
any possibility of  
inflammable gas  
leakage around the  
unit.  
Do not get the unit  
exposed to vapor  
or oil steam.  
Connect the earth  
cable.  
Check proper  
installation of the  
drainage securely  
earthing  
STRICT  
ENFORCEMENT  
PROHIBITION  
PROHIBITION  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions  
WARNING  
When abnormality such as burnt-small found,  
immediately stop the operation button and  
contact sales shop.  
Use an exclusive power source with a  
circuit breaker  
STRICT  
ENFORCEMENT  
OFF  
Connect power supply cord  
to the outlet completely  
Use the proper voltage  
Do not use power supply cord  
extended or connected in halfway  
STRICT  
ENFORCEMENT  
STRICT  
ENFORCEMENT  
PROHIBITION  
Do not insert objects into the air  
inlet or outlet.  
Take care not to damage  
the power supply cord.  
Do not use power supply cord  
in a bundle.  
PROHIBITION  
PROHIBITION  
PROHIBITION  
Do not channel the air flow directly  
at people, especially at infants or  
the aged.  
Do not start or stop the  
operation by disconnecting  
the power supply cord and so on.  
Do not try to repair or reconstruct  
by yourself.  
PROHIBITION  
PROHIBITION  
CAUTION  
Take fresh air occasionally especially  
when gas appliance is running at the  
same time.  
Do not operate the switch with  
wet hand.  
Do not use for the purpose of storage of  
food, art work, precise equipment,  
breeding, or cultivation.  
STRICT  
ENFORCEMENT  
PROHIBITION  
PROHIBITION  
Do not pour water onto the unit  
for cleaning  
Do not install the unit near a fireplace  
or other heating apparatus.  
Check good condition of the  
installation stand  
PROHIBITION  
PROHIBITION  
PROHIBITION  
Do not place animals or plants in  
the direct path of the air flow  
Do not place flower vase or water  
containers on the top of the unit.  
Do not place any objects on or  
climb on the unit.  
PROHIBITION  
PROHIBITION  
PROHIBITION  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble shooting  
Before asking for service, check the following first.  
Phenomenon  
Cause or check points  
The system does not restart  
immediately.  
When unit is stopped, it won't restart  
immediately until 3 minutes have elapsed  
to protect the system.  
When the electric plug is pulled out and  
reinserted, the protection circuit will work  
for 3 minutes to protect the air conditioner.  
During unit operation or at stop, a swishing  
or gurgling noise may be heard. At first 2-3  
minutes after unit start, this noise is more  
noticeable. (This noise is generated by  
refrigerant flowing in the system.)  
Noise is heard  
Normal  
Performance  
inspection  
During unit operation, a cracking noise may  
be heard. This noise is generated by the  
casing expanding or shrinking because of  
temperature changes  
Should there be a big noise from air flow in  
unit operation, air filter may be too dirty.  
This is because the system circulates smells  
from the interior air such as the smell of  
furniture, cigarettes.  
Smells are generated.  
Mist or steam are blown out.  
During COOL or DRY operation, indoor unit  
may blow out mist. This is due to the sudden  
cooling of indoor air.  
Does not work at all.  
Poor cooling  
Is power plug inserted?  
Is there a power failure?  
Is fuse blown out?  
Multiple  
check  
Is the air filter dirty? Normally it should be  
cleaned every 15 days.  
Are there any obstacles before inlet and outlet?  
Is temperature set correctly?  
Are there some doors or windows left open?  
Is there any direct sunlight through the  
window during the cooling operation?(Use  
curtain)  
Are there too much heat sources or too many  
people in the room during cooling operation?  
Application temp. range of air conditioner -7oC~43oC.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Cordless Sander G1014Z User Manual
Grundig Home Theater Server MPaxx 900 series User Manual
Grundig Radio GUADAB08IP User Manual
Haier Microwave Oven EB 44100E User Manual
Hamilton Beach Griddle Electric Griddle User Manual
HANNspree Flat Panel Television HANNSrobby User Manual
Honeywell Smoke Alarm 5808W3 User Manual
Hotpoint Oven SC52 FC52 User Manual
HP Hewlett Packard Welding System 203A User Manual
Hunter Fan Dehumidifier 41554 01 User Manual