HP Uninterruptible Power System
T2200 XR Models
User Guide
August 2002 (Second Edition)
Part Number 215503-002
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
About This Guide
Important Safety Information ..................................................................................................................... vii
Symbols on Equipment............................................................................................................................... vii
Symbols in Text.........................................................................................................................................viii
Related Documents....................................................................................................................................viii
Getting Help...............................................................................................................................................viii
Chapter 1
UPS Features .............................................................................................................................................1-1
Communications Port..........................................................................................................................1-1
Network Transient Protector ...............................................................................................................1-2
Overcurrent Protection........................................................................................................................1-2
UPS T2200 XR Models.............................................................................................................................1-2
Front Panel ..........................................................................................................................................1-3
Rear Panels..........................................................................................................................................1-4
Power Management Software....................................................................................................................1-8
UPS Hardware Options..............................................................................................................................1-8
Warranties..................................................................................................................................................1-9
$25,000 Computer Load Protection Guarantee...................................................................................1-9
Pre-Failure Battery Warranty..............................................................................................................1-9
Chapter 2
Front Panel Controls and LED Indicators..................................................................................................2-1
Modes of Operation ...................................................................................................................................2-2
Charging the Batteries ...............................................................................................................................2-3
Placing the UPS in Operate Mode.............................................................................................................2-3
Returning to Standby Mode.......................................................................................................................2-4
Initiating a Self-Test ..................................................................................................................................2-5
Audible Alarms..........................................................................................................................................2-6
Silencing an Audible Alarm................................................................................................................2-6
Shutting Down the System ........................................................................................................................2-6
HP Uninterruptible Power System T2200 XR Models User Guide
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 3
Placing the UPS in Configure Mode......................................................................................................... 3-1
Chapter 4
Precautions ................................................................................................................................................ 4-1
Charging Batteries..................................................................................................................................... 4-1
Determining When to Replace Batteries................................................................................................... 4-2
Chapter 5
Troubleshooting During Startup................................................................................................................ 5-1
Appendix A
Regulatory Compliance Notices
Federal Communications Commission Notice..........................................................................................A-1
Class A Equipment .............................................................................................................................A-1
Class B Equipment .............................................................................................................................A-2
Modifications......................................................................................................................................A-2
Japanese Notice.........................................................................................................................................A-4
China Taiwan Notice.................................................................................................................................A-4
Appendix B
Grounding Methods...................................................................................................................................B-1
iv
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Appendix C
Physical Specifications ............................................................................................................................. C-1
Battery Specifications............................................................................................................................... C-4
Environmental Specifications................................................................................................................... C-5
Index
HP Uninterruptible Power System T2200 XR Models User Guide
v
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
This guide provides step-by-step instructions for configuration, and reference information for
operation, battery maintenance, and troubleshooting for the Uninterruptible Power
System (UPS).
Audience Assumptions
This guide is intended for individuals requiring information about the use of HP UPSs. HP
assumes you are qualified in the servicing of computer equipment and trained in recognizing
hazards in products with hazardous energy levels.
Important Safety Information
Before installing this product, read the Important Safety Information document included with
the UPS.
Symbols on Equipment
The following symbols may be placed on equipment to indicate the presence of potentially
hazardous conditions:
WARNING: This symbol, in conjunction with any of the following symbols, indicates
the presence of a potential hazard. The potential for injury exists if warnings are not
observed. Consult your documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates that the component exceeds the recommended weight for
one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment,
Weight in kg
observe local occupational health and safety requirements and guidelines for
manual material handling.
Weight in lb
HP Uninterruptible Power System T2200 XR Models User Guide
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
Symbols in Text
These symbols may be found in the text of this guide. They have the following meanings.
WARNING: Text set off in this manner indicates that failure to follow directions in the
warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents essential information to explain a concept or
complete a task.
NOTE: Text set off in this manner presents additional information to emphasize or supplement
important points of the main text.
Related Documents
For additional information on the topics covered in this guide, refer to the following
documents:
•
•
HP Uninterruptible Power System T2200 XR Models Installation Instructions
HP UPS T1500 XR / T2200 XR Models Extended Runtime Module Installation
Instructions
•
•
HP UPS XR Products Power Cord and Options Reference Guide
Industry Standard Terminology Glossary
Getting Help
If you have a problem and have exhausted the information in this guide, you can get further
information and other help in the following locations.
viii
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
Technical Support
In North America, call the HP Technical Support Phone Center at 1-800-652-6672. This
service is available 24 hours a day, 7 days a week. For continuous quality improvement, calls
may be recorded or monitored. Outside North America, call the nearest HP Technical Support
Phone Center. For telephone numbers of worldwide Technical Support Centers, go to
Have the following information available before you call:
•
•
•
•
•
•
•
•
Technical support registration number (if applicable)
Product serial number
Product model name and number
Applicable error messages
Add-on boards or hardware
Third-party hardware or software
Operating system type and revision level
Power management software type and version
HP Website
For information on this product as well as the latest drivers, firmware updates, and service
Authorized Reseller
For the name of your nearest authorized reseller:
•
•
In the United States, call 1-800-345-1518.
In Canada, call 1-800-263-5868.
Elsewhere, see the HP website for locations and telephone numbers.
Reader’s Comments
To comment on this guide, send e-mail to [email protected].
HP Uninterruptible Power System T2200 XR Models User Guide
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Overview
This chapter contains a general overview of the HP UPS, including an introduction to the
model configurations, power management software, available hardware options, and
warranties. Read this chapter to become familiar with the features of the UPS before
operating the unit.
UPS Features
The following features make this UPS versatile and easy to use:
•
•
•
•
Communications port for data exchange with the host computer
Network Transient Protector
Load segment control
Load power protection up to 1920 VA/1600 W (T2200 XR-NA model) or
2080 VA/1600 W (T2200 XR-H NA, T2200 XR-JPN, and T2200 XR-H INT’L models)
•
•
Support for UPS power management software
Support for HP hardware option cards, extending the power management capabilities of
the UPS
•
•
Support for HP Extended Runtime Modules (ERMs), options that extend the available
runtime of the UPS
Ease of use and configuration
Communications Port
The UPS includes a communications port for data exchange with a host computer.
CAUTION: Use only the specific cables supplied with the UPS to connect the
communications port to the host computer.
HP Uninterruptible Power System T2200 XR Models User Guide
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Network Transient Protector
The UPS includes a Network Transient Protector (NTP) that provides surge protection for
connected communication devices.
CAUTION: To avoid damaging the equipment, do not connect the Network Transient
Protector to a digital PBX line. Connect either to an analog phone line or to a network.
Overcurrent Protection
Select models feature overcurrent protection provided through resettable circuit protectors
located on the UPS rear panel.
UPS T2200 XR Models
The UPS models include the following.
Table 1-1: UPS T2200 XR Models
Kit Part
Number
Unit Part
Number
Series
Number
UPS Model
Comments
T2200 XR NA
204451-001
204451-291
204451-002
204451-B31
204452-001
EO3019
EO3019j
EO3019h
EO3019i
Domestic, low-voltage tower
with non-detachable
NEMA 5-20 plug
T2200 XR JPN
204452-191
204452-003
204452-002
Japanese, low-voltage tower
with non-detachable
NEMA L5-30 plug
T2200 XR H NA
T2200 XR H INT’L
Domestic, high-voltage tower
with IEC-320 input power
receptacle
International, high-voltage
tower with IEC-320 input
power receptacle
1-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Front Panel
The front panel of the UPS is shown in Figure 1-1.
1
2
3
Figure 1-1: Front panel configuration
1
2
3
LED display
Control buttons
Battery compartment
For detailed information on using the control buttons and LED indicators, refer to the section,
“Front Panel Controls and LED Indicators,” in Chapter 2.
HP Uninterruptible Power System T2200 XR Models User Guide
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Rear Panels
The rear panel configurations of the UPS are shown in Figures 1-2, 1-3, 1-4, and 1-5.
2
1
3
4
5
6
8
7
Figure 1-2: Rear panel of T2200 XR NA
1
2
3
4
5
6
7
8
Communications port/option slot
Network Transient Protector IN jack
Network Transient Protector OUT jack
Load segment 2 (three NEMA 5-15 receptacles)
Load segment 1 (three NEMA 5-15 receptacles)
Load segment 3 (two NEMA 5-20 receptacles)
ERM connector
Power cord with NEMA 5-20 plug
1-4
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
2
1
3
4
5
6
7
10
9
8
Figure 1-3: Rear panel of T2200 XR JPN
1
2
3
4
5
6
7
8
9
Communications port/option slot
Network Transient Protector IN jack
Network Transient Protector OUT jack
Circuit protectors
Load segment 2 (three NEMA 5-15 receptacles)
Load segment 1 (three NEMA 5-15 receptacles)
Load segment 3 (two NEMA 5-20 receptacles)
Circuit protector
ERM connector
10 Power cord with NEMA L5-30 plug
HP Uninterruptible Power System T2200 XR Models User Guide
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
1
2
3
4
5
6
9
8
7
Figure 1-4: Rear panel of T2200 XR H NA
1
2
3
4
5
6
7
Communications port/option slot
Network Transient Protector IN jack
Network Transient Protector OUT jack
Load segment 3 (three IEC-320-C13 receptacles)
Load segment 2 (three IEC-320-C13 receptacles)
Load segment 1 (three IEC-320-C13 receptacles)
Input power receptacle (IEC-320-C14) for country-specific
plug attachment
8
9
Circuit protector
ERM connector
WARNING: Risk of personal injury from electric shock. This model is not suitable for
installation where the total earth (ground) conductor leakage current for all connected
devices exceeds 3.5 mA.
1-6
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
1
2
3
4
5
6
8
7
Figure 1-5: Rear panel of T2200 XR H INT’L
1
2
3
4
5
6
7
Communications port/option slot
Network Transient Protector IN jack
Network Transient Protector OUT jack
Load segment 3 (three IEC-320-C13 receptacles)
Load segment 2 (three IEC-320-C13 receptacles)
Load segment 1 (three IEC-320-C13 receptacles)
Input power receptacle (IEC-320-C14) for country-specific
plug attachment
8
ERM connector
WARNING: Risk of personal injury from electric shock. This model is not suitable for
installation where the total earth (ground) conductor leakage current for all connected
devices exceeds 3.5 mA.
HP Uninterruptible Power System T2200 XR Models User Guide
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Power Management Software
Power management software ensures maximum power reliability of HP computer systems
through comprehensive control of HP UPSs. Specifically, power management software
performs the following:
IMPORTANT: Not all UPSs are equipped to support the entire feature set listed.
•
•
Manages a graceful shutdown of attached equipment during utility power failures
Manages independent UPS load segments to provide separate power control of connected
equipment
•
•
•
•
Prioritizes the timing of equipment shutdowns, and reboots connected equipment by load
segment
Shuts down and reboots HP UPSs and attached equipment based on a user-specified
schedule
Delays restart by load segment after a power outage to sequence the startup of system
components
Customizes alert generation with modifiable popup dialog boxes, command execution,
and email and broadcast messages
•
•
Monitors the status of the UPS and performs UPS diagnostics
Displays power logs for analysis
For more information, refer to the power management CD provided with the UPS. For the
UPS Hardware Options
Table 1-2 lists the available hardware options for the UPS.
Table 1-2: Hardware Options
Option
Part Number
218969-B21
192185-B21
192189-B21
HP ERM
HP Six Port Card
HP SNMP / Serial Port Card
For more information on the supported hardware options, refer to the HP UPS XR Products
Power Cord and Options Reference Guide included on the Power Products Documentation
1-8
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Warranties
To back up the wide range of features offered with the UPS, HP provides a three-year limited
warranty.
$25,000 Computer Load Protection Guarantee
In addition to the limited warranty, HP offers a $25,000 Computer Load Protection Guarantee
(provided by the original equipment manufacturer).
IMPORTANT: The $25,000 Computer Load Protection Guarantee is offered only in North America.
The $25,000 Computer Load Protection Guarantee applies only if:
•
•
•
•
The UPS is plugged into a suitably grounded and wired outlet using no extension cords,
adapters, other ground wires, or other electrical connections.
The UPS installation complies with all applicable electrical and safety codes specified by
the National Electrical Code (NEC).
The UPS is used under normal operating conditions. Users must comply with all
instructions and labels.
The UPS is not damaged by accident (other than a utility power transient), misuse, or
abuse.
Pre-Failure Battery Warranty
For specific information on the battery warranty, refer to the section, “Pre-Failure Battery
Warranty,” in Chapter 4.
HP Uninterruptible Power System T2200 XR Models User Guide
1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Operation
This chapter contains information on operating the UPS. Topics include the front panel
controls, LED indicators, and modes of operation. Knowledge of these features is helpful
when configuring and troubleshooting the unit.
NOTE: For installation considerations and procedures, refer to the instructions included with the UPS.
Front Panel Controls and LED Indicators
The front panel controls and LED indicators provide an easy-to-use interface for UPS
configuration and monitoring.
1
2
3
4
5
8
9
6
7
10
15
14
12 11
13
Figure 2-1: Front panel controls and LED indicators
Item Description
Meaning/Function
1
2
3
4
5
Overload LED
Red—UPS load exceeds maximum power available.
Green—UPS load approximately 76% to 100% of maximum power.
Green—UPS load approximately 51% to 75% of maximum power.
Green—UPS load approximately 26% to 50% of maximum power.
Green—UPS load approximately 0% to 25% of maximum power.
76% to 100% load
51% to 75% load
26% to 50% load
0% to 25% load
continued
HP Uninterruptible Power System T2200 XR Models User Guide
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
continued
Item Description
Meaning/Function
6
7
Site Wiring Fault
Red—No ground connection exists between utility power and the UPS,
the line and neutral connections between utility power and the UPS
are reversed, or the UPS voltage configuration is incorrect.
Indicator (
)
Utility LED (
)
Flashing Red—Utility input voltage is outside the +20% to -30%
configured nominal range.
Green—Utility voltage is present and output is on, or utility voltage has
returned to the voltage range for which the UPS has been configured
(UPS is supplying utility power and the audible alarm should be reset).
Flashing Green—Utility voltage is present and the UPS is in Standby
mode. Output is off. Batteries charge if needed.
8
Bad Battery/Low
Battery (
Red—Battery is bad or low.
)
9
On Battery (
)
Red—UPS is running on battery power.
10
11
General Alarm (
)
Red—UPS detects a general alarm. Perform a self-test.
Configure Mode On Green—UPS is in Configure mode (seen when front bezel removed).
LED
12
13
Configure button
Places the UPS in Configure mode (seen when front bezel removed).
Resets alarms or initiates self-tests.
Test/Alarm Reset
button
14
15
Standby button
On button
Places the UPS in Standby mode (turns output load segments off).
Starts UPS powering the load.
Modes of Operation
The UPS has three modes of operation:
Standby Mode
•
— No power is available at the UPS output receptacles.
— The UPS charges the batteries as necessary.
Operate Mode
•
•
— Power is available at the UPS output receptacles.
— The UPS charges the batteries as necessary.
Configure Mode
— Power is available at the UPS output receptacles.
— The UPS charges the batteries as necessary.
— The UPS configuration can be updated.
2-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Charging the Batteries
When the UPS is in Standby mode, allow the batteries to charge before putting the UPS into
service.
IMPORTANT: The batteries charge to:
•
•
90 percent of their capacity within 3 hours
100 percent of their capacity within 24 hours
Charge the batteries for at least 24 hours before supplying backup power to devices.
Placing the UPS in Operate Mode
The UPS can be placed in Operate mode if either of the following conditions apply:
•
•
The UPS is powered up and in Standby mode (the Utility LED is flashing green).
The UPS is powered down and no utility power is available.
Press and hold the On button (2) until the Utility LED (1) turns solid green, indicating that
power is available at the UPS output receptacles. The UPS acknowledges compliance with a
short beep.
IMPORTANT: If the UPS is running on battery power (no utility power is present), press and hold the
On button (2) until the audible alarm sounds.
1
2
Figure 2-2: Placing the UPS in Operate mode
HP Uninterruptible Power System T2200 XR Models User Guide
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Returning to Standby Mode
When the UPS is in Operate mode (the Utility LED is solid green), press and hold the
Standby button (2) until the audible alarm sounds. The Utility LED (1) flashes, and power to
the loads ceases.
1
2
Figure 2-3: Placing the UPS in Standby mode
IMPORTANT:
•
While in Standby mode, the UPS maintains the charge on the batteries, but no power is available
at the output receptacles.
•
The UPS remains in Standby mode until an alternate mode is selected, or until utility power is
removed.
2-4
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Initiating a Self-Test
To initiate a self-test, press and hold the Test/Alarm Reset button (1) for three seconds.
1
Figure 2-4: Test/Alarm Reset button
Because a portion of the self-test requires battery power, the self-test cannot be initiated if the
batteries are less than 90 percent charged. If the UPS detects a problem, the appropriate LED
illuminates and an audible alarm may sound.
WARNING: To reduce the risk of electric shock from Earth (ground) conductor leakage
current, use the self-test procedure to check the UPS batteries (rather than unplugging
the UPS).
•
•
For the meaning of individual LEDs, refer to “Front Panel Controls and LED Indicators,”
in this chapter.
For information on what to do if the self-test detects a problem, refer to Chapter 5,
“Troubleshooting.”
HP Uninterruptible Power System T2200 XR Models User Guide
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audible Alarms
The UPS may sound an audible alarm to warn of a problem. For information on what to do if
the UPS detects an alarm condition, refer to Chapter 5, “Troubleshooting.”
Silencing an Audible Alarm
To silence an audible alarm, press the Test/Alarm Reset button (1).
1
Figure 2-5: Test/Alarm Reset button
IMPORTANT:
•
Although an audible alarm silences, the condition that caused the alarm still exists. For information
on what to do if the UPS detects an alarm condition, refer to Chapter 5, “Troubleshooting.”
•
If a utility power failure caused the alarm (the Utility LED or the General Alarm LED illuminates
red), the alarm silences after utility power is restored.
Shutting Down the System
To shut down the system:
1. Shut down all load devices.
2. Press the Standby button to take the UPS out of Operate mode.
3. Disconnect the UPS from utility power.
4. Wait at least 60 seconds while the UPS internal circuitry discharges.
2-6
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Configuration
This chapter contains information on configuring the UPS. Proper configuration of the UPS is
important in performing other functions on the unit, such as maintaining the battery and
troubleshooting alarms.
Placing the UPS in Configure Mode
The UPS can enter Configure mode while in Operate or Standby mode.
To place the UPS in Configure mode:
1. Remove the front bezel by snapping the bezel off (1).
1
Figure 3-1: Removing the UPS front bezel
HP Uninterruptible Power System T2200 XR Models User Guide
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
2. Press and hold the Configure button (2) for three seconds. When the Configure button is
released, the front panel configuration parameters flash in unison and the Configure
Mode On LED (1) illuminates solid green.
1
2
Figure 3-2: Placing the UPS in Configure mode
Configuration Parameters
In Configure mode, the front panel LED display changes function to allow UPS monitoring.
The LED control buttons allow modification of the UPS configuration parameters. The
configuration parameters are defined in Table 3-1. Available voltage settings per model are
listed in Table 3-2.
Table 3-1: Configuration Parameters
Parameter (LED)
Parameter Name Explanation (when illuminated)
General Alarm
100/200-208
Nom
Nominal utility voltage level is selected to 100/208 VAC.
(
)
On Battery
110/220 Nom
120/230 Nom
Nominal utility voltage level is selected to 110/220 VAC.
Nominal utility voltage level is selected to 120/230 VAC.
(
)
Bad Battery/Low
Battery
(
)
Site Wiring Fault
Indicator
127/240 Nom
Nominal utility voltage level is selected to 127/240 VAC.
(
)
Utility LED
Site Wiring
Fault Indicator
Audible alarm is enabled if ground is missing, or if line
and neutral connections are reversed.
(
)
3-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Table 3-2: Available Voltage Settings
UPS Model
Available Settings
Utility Voltage (VAC)
Parameter (LED)
On Battery (
T2200 XR NA
110
)
120 (default)
Bad Battery/Low Battery (
Site Wiring Fault Indicator (
)
)
127
T2200 XR JPN
100
General Alarm (
General Alarm (
)
)
T2200 XR H NA
T2200 XR H INT’L
208
220
On Battery (
)
230 (default)
Bad Battery/Low Battery (
Site Wiring Fault Indicator (
)
)
240
Changing Configuration Parameters
Refer to Figure 3-3 when changing configuration parameters.
1
2
3
4
5
Figure 3-3: Changing configuration parameters
To change configuration parameters:
1. Place the UPS in Configure mode by pressing the Configure button (5) until the
Configure Mode On LED (4) illuminates solid green.
When you release the Configure button, the configurable LEDs flash briefly, then the
LED associated with the current configuration illuminates.
HP Uninterruptible Power System T2200 XR Models User Guide
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
2. To advance to the appropriate voltage configuration (to the right), press the On
button (1). The selected voltage configuration LED flashes. Activate the voltage
configuration by pressing the Standby button (2). The previously selected configuration
parameter LED turns off.
NOTE: Only one nominal utility voltage can be configured. When setting voltage configuration
parameters, selecting an On value for any one parameter automatically sets the other three
possibilities to Off.
3. To toggle the Site Wiring Fault option from active to inactive, press the On button (1) to
advance to the Site Wiring Fault LED, then press the Standby button (2).
4. To accept the configuration settings and exit Configure mode, press the Test/Alarm Reset
button (3).
NOTE: If the unit remains idle for two minutes, Configure mode times out and the configuration settings
are not stored.
3-4
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Battery Maintenance
This chapter contains information for properly maintaining batteries for the UPS, including
battery charging, replacement, disposal procedures, and warranties.
Precautions
WARNING: There is a risk of personal injury from the hazardous energy levels
associated with UPS batteries. The maintenance and replacement of batteries must be
carried out by an authorized service representative.
WARNING: The UPS contains sealed lead-acid batteries. To reduce the risk of fire or
chemical burns, take the following precautions:
•
•
•
•
•
Do not attempt to recharge batteries after removal from the UPS.
Do not disassemble, crush, or puncture the batteries.
Do not short the external contacts of the batteries.
Do not immerse the batteries in water.
Do not expose to temperatures higher than 60°C (140°F).
WARNING: To reduce the risk of personal injury from hazardous energy, take the
following precautions:
•
•
Remove watches, rings, or other metal objects.
Use tools with insulated handles.
Charging Batteries
When connected to utility power, the UPS automatically charges the batteries. No user
intervention is required while the UPS is in use. For information on keeping the batteries
charged while the UPS is in extended storage, refer to the section, “Care and Storage of
Batteries,” in this chapter.
HP Uninterruptible Power System T2200 XR Models User Guide
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Maintenance
Determining When to Replace Batteries
When the Bad Battery/Low Battery LED (1) illuminates red, batteries may need to be
replaced within 30 to 60 days.
1
Figure 4-1: Bad Battery/Low Battery LED
To check a battery alarm, initiate a UPS battery self-test to verify that battery replacement is
required. If the Bad Battery/Low Battery LED (1) remains red, replace the batteries as soon
as possible.
NOTE: Depending on usage and environmental conditions, the batteries should last three to six years.
For more information on initiating a self-test, refer to the section, “Initiating a Self-Test,” in
Chapter 2.
Obtaining New Batteries
New batteries may be required within 30 to 60 days when the Bad Battery/Low Battery LED
illuminates red. Obtain spare batteries for the UPS when this occurs.
HP supplies spare battery packs for this UPS. The UPS spare battery kit part number is
240796-001.
CAUTION: Because of the short shelf life of the battery, avoid storing a battery spare as a
backup. Do not maintain an onsite inventory of spare batteries unless a procedure to keep the
stored batteries charged is implemented.
4-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Maintenance
Replacing Batteries
There are two options for replacing UPS batteries:
•
•
Powering down the UPS before removing the batteries
In certain circumstances, replacing the batteries without powering down the UPS
CAUTION: While replacing batteries without powering down the UPS, the UPS is not
protected in the event of a utility power failure.
Preparing the UPS
Batteries can be replaced without powering down the UPS if the UPS is not supplying battery
power to devices (utility is present, indicating that the UPS is supplying utility power).
To replace batteries with the UPS powered down:
1. Shut down all load devices.
2. Press the Standby button to take the UPS out of Operate mode.
3. Disconnect the UPS from utility power.
4. Wait at least 60 seconds while the UPS internal circuitry discharges.
HP Uninterruptible Power System T2200 XR Models User Guide
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Maintenance
Removing the Battery Pack
To remove the battery pack:
1. Remove the front bezel by depressing the tab located under the front bezel and pulling
from the bottom (1). The LED/control button pedestal remains attached to the UPS.
2. Gain access to the metal battery bracket by swinging the LED/control button pedestal to
the right (2).
2
1
Figure 4-2: Removing the front bezel and LED/control button
pedestal
3. Remove the metal battery bracket and set it to the side.
Figure 4-3: Removing the metal battery bracket
4-4
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Maintenance
4. Unfasten the plastic handle (1) and partially remove the battery pack (2).
5. Disconnect the battery cable by pressing the black tab on the connector (3) and pulling
apart (4).
3
2
1
4
Figure 4-4: Disconnecting the battery connector cable
6. Remove the battery pack. Set aside the used battery pack for proper disposal. Refer to
“Disposing of Used Batteries,” in this chapter.
WARNING: If the UPS is not powered down, immediately replace the battery pack. Do
not allow terminal connections to contact conductive materials. Do not touch or bring
tools in close proximity to terminals.
Installing a New Battery Pack
To install a new battery pack, reverse the steps in the section, “Removing the Battery Pack,”
in this chapter.
IMPORTANT: Check clearance on battery terminal connections when reinserting the battery pack into
the battery compartment.
HP Uninterruptible Power System T2200 XR Models User Guide
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Maintenance
Testing the New Battery Pack
After installing the new battery pack, press the Test/Alarm Reset button. For information on
initiating a self-test, refer to the section, “Initiating a Self-Test,” in Chapter 2.
IMPORTANT: The UPS does not execute a self-test until the batteries are 90 percent charged.
If the installation has been successful, the Bad Battery/Low Battery LED is not illuminated.
If the installation has not been successful, the Bad Battery/Low Battery LED illuminates red.
If this occurs, remove and reinstall the battery pack, and check the battery terminal
connections. If the Bad Battery/Low Battery LED is still red, refer to Chapter 5,
“Troubleshooting.”
IMPORTANT: The batteries charge to 90 percent of their capacity within less than 3 hours. Allow the
batteries to charge for 24 hours before using the UPS to supply backup power to devices. The load may
not be fully protected for 24 hours.
Disposing of Used Batteries
The spare battery kit includes the instructions and packaging required to return used batteries
to the appropriate location for disposal.
Do not dispose of used batteries with general office or household waste. Return
the used pack for proper disposal to either:
•
•
HP, authorized HP Partners, or their agents
A recycling center that meets all local environmental standards
Care and Storage of Batteries
To maximize the life of batteries:
•
Minimize the amount of time the UPS uses battery power by matching the UPS
configuration with the utility voltage. For more information, refer to Chapter 3,
“Configuration.”
•
Keep the area around the UPS clean and dust-free. If the environment is very dusty, clean
the outside of the UPS regularly with a vacuum cleaner.
•
•
Maintain the ambient temperature at 25oC (77oF).
If storing a UPS for an extended period, recharge the batteries every six months:
a. Connect the UPS to utility power.
b. Allow the UPS to remain in Standby mode.
c. Allow the UPS to charge the batteries for 24 hours.
d. Update the battery recharge date label.
4-6
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Maintenance
Pre-Failure Battery Warranty
The Pre-Failure Battery Warranty, standard on all HP UPS units, extends the advantage of an
HP three-year limited warranty by applying it to the battery before it actually fails.
Specifically, the Pre-Failure Battery Warranty ensures that when customers receive
notification from HP power management software that the battery may fail, the battery is
replaced free of charge under the warranty.
HP maintains the highest standards in the industry, as evidenced by the HP Pre-Failure
Battery Warranty. This warranty is beneficial in at least two significant ways:
•
•
Reduced total cost of ownership
Reduced downtime
A Pre-Failure Battery warning is given 30 days before a battery failure. The warning is
indicated in one or both of the following ways:
•
•
An LED showing the battery is low
Notification from HP power management software
This warning provides ample time to order a spare battery. You can order a spare at
The battery warranty coverage is three years for parts. The warranty for the first year of
ownership includes parts and labor. If battery spares are not available for a particular HP UPS
model, then the entire UPS, including its battery, is replaced.
HP Uninterruptible Power System T2200 XR Models User Guide
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Troubleshooting
This chapter serves as a troubleshooting guide when problems occur with the UPS. Solutions
for UPS problems that occur both during and after startup are covered.
Troubleshooting During Startup
If problems occur when starting the UPS, refer to Table 5-1 for possible causes and suggested
actions.
Table 5-1: Troubleshooting During Startup
Symptom
Possible Cause
Suggested Action
The UPS does not start.
There is no utility power.
Check power at the utility power
receptacle or contact a qualified
electrician.
The UPS power cord is
disconnected.
Connect the power cord.
The Site Wiring Fault
LED ( ) is red.
The utility power receptacle is
ungrounded or there is no
ground wire in the UPS power
cord.
Contact a qualified electrician to
correct the condition.
The Bad Battery/
Low Battery LED ( ) is
flashing red.
The battery voltage is low
because the UPS has been
out-of-service for a long period.
Allow the UPS to charge the
batteries for 24 hours. Initiate a
self-test. If the Bad Battery/Low
Battery LED does not turn off,
replace the batteries.
The battery test failed.
Allow the UPS to charge the
batteries for 24 hours. Initiate a
self-test. If the Bad Battery/Low
Battery LED does not turn off,
replace the batteries.
The battery is disconnected.
Install the battery pack. If the
battery pack is installed, remove
the pack and then insert it again.
HP Uninterruptible Power System T2200 XR Models User Guide
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting After Startup
If problems occur after starting the UPS, refer to Table 5-2 for possible causes and suggested
actions.
Table 5-2: Troubleshooting After Startup
Symptom
Possible Cause
Suggested Action
An audible alarm
sounds.
An alarm condition exists.
Identify the red LED associated
with this alarm condition. Check this
troubleshooting guide to determine
the cause of the alarm.
The Utility LED ( ) and
On Battery LED ( ) are
flashing red.
The utility voltage is too high.
The utility voltage is higher than the
UPS operating range. The UPS
switches to battery power. If this
happens repeatedly, update the
configuration.
Contact a qualified electrician to
verify that the utility power is
suitable for the UPS.
The Utility LED ( ) and
On Battery LED ( ) are
flashing red.
The utility voltage is too low.
The utility voltage is lower than the
UPS operating range. The UPS
switches to battery power. If this
happens repeatedly, update the
configuration.
Contact a qualified electrician to
verify that the utility power is
suitable for the UPS.
The Utility LED ( ) and
On Battery LED ( ) are
flashing red.
The utility frequency is out of
tolerance.
Contact a qualified electrician to
verify that the utility power is
suitable for the UPS.
The Utility LED ( ) is
flashing red.
The utility input voltage is
outside the +20% to -30%
nominal range.
If this happens repeatedly, check
the input voltage and reconfigure
the UPS.
Contact a qualified electrician to
verify that the utility power is
suitable for the UPS.
The Utility LED ( ) is
flashing green and the
The utility power is within the
acceptable range and the output
Press the On button.
UPS is in Standby mode. is off.
The UPS frequently
switches between utility
and battery power.
There are variations in utility
power.
The utility voltage is frequently
outside the UPS operating range.
Update the configuration.
Contact a qualified electrician to
verify that the utility power is
suitable for the UPS.
continued
5-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Table 5-2: Troubleshooting After Startup continued
Symptom Possible Cause
Suggested Action
The Overload LED is red. Protected devices are
Remove one or more devices to
reduce the power requirements.
exceeding the UPS power
rating.
The UPS may switch from utility
to battery power.
Verify that the devices are not
defective.
The On Battery LED (
is flashing red.
)
The battery voltage is low.
If the UPS is supplying battery
power, save your current work and
power down the system. Allow the
batteries to charge.
If the UPS is supplying utility power,
no user intervention is required.
Allow the batteries to charge.
There is insufficient
warning of low batteries.
Battery service is required.
Allow batteries to charge for 24
hours, then initiate a self-test. If the
Bad Battery/Low Battery LED is
red, replace batteries.
The Shutdown Delay
configuration is inappropriate.
Update the Shutdown Delay from
5 seconds to 3 minutes.
Use HP power management
software to specify a suitable delay.
The Bad Battery/
Low Battery LED ( ) is
flashing red.
A potential battery failure is
detected.
Allow the batteries to charge for 24
hours, then initiate self-test. If the
Bad Battery/Low Battery LED is
red, replace the batteries.
New batteries are improperly
connected.
Verify that the batteries are
connected properly.
All LEDs are flashing
red and an audible
alarm cannot be
silenced.
An internal UPS fault condition
exists.
Power down the UPS. Contact an
authorized service representative.
Repairing the UPS
Repairs to the UPS must be carried out by HP or an authorized service representative. Other
than battery replacement, there are no UPS user-serviceable parts.
HP Uninterruptible Power System T2200 XR Models User Guide
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your product has
been assigned a unique series number. The series number can be found on the product
nameplate label, along with all required approval markings and information. When requesting
compliance information for this product, always refer to this series number. The series
number should not be confused with the marketing name or model number of the product.
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has
established Radio Frequency (RF) emission limits to provide an interference-free radio
frequency spectrum. Many electronic devices, including computers, generate RF energy
incidental to their intended function and are, therefore, covered by these rules. These rules
place computers and related peripheral devices into two classes, A and B, depending upon
their intended installation. Class A devices are those that may reasonably be expected to be
installed in a business or commercial environment. Class B devices are those that may
reasonably be expected to be installed in a residential environment (for example, personal
computers). The FCC requires devices in both classes to bear a label indicating the
interference potential of the device as well as additional operating instructions for the user.
The rating label on the device shows the classification (A or B) of the equipment. Class B
devices have an FCC logo or FCC ID on the label. Class A devices do not have an FCC logo
or FCC ID on the label. After the class of the device is determined, refer to the corresponding
statement in the following sections.
Class A Equipment
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at
personal expense.
HP Uninterruptible Power System T2200 XR Models User Guide
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit that is different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio or television technician for help.
Declaration of Conformity for Products Marked with the FCC Logo,
United States Only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
For questions regarding your product, contact us by mail or telephone:
•
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
•
1-800-652-6672 (For continuous quality improvement, calls may be recorded or
monitored.)
For questions regarding this FCC declaration, contact us by mail or telephone:
•
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
•
1-281-514-3333
To identify this product, refer to the part, series, or model number found on the product.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Hewlett-Packard Company may void the user’s
authority to operate the equipment.
A-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI
connector hoods in order to maintain compliance with FCC Rules and Regulations.
Canadian Notice (Avis Canadien)
Class A Equipment
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Class B Equipment
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
European Union Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the
Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards):
•
•
EN50091-1 – UPS Product Safety Requirements
EN50091-2 – UPS EMC Requirements
HP Uninterruptible Power System T2200 XR Models User Guide
A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Battery Replacement Notice
The UPS is equipped with a sealed lead-acid battery pack. There is a danger of explosion and
risk of personal injury if the battery is incorrectly replaced or mistreated. Replacement is to
be done using the designated spare for this product. For more information about battery
replacement or proper disposal, contact your authorized reseller or your authorized service
provider.
WARNING: The UPS contains a sealed lead-acid battery pack. There is risk of fire and
burns if the battery pack is not properly handled. To reduce the risk of personal injury:
•
•
•
Do not attempt to recharge the battery.
Do not expose to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire
or water.
•
Replace only with the spare designated for this product.
Batteries, battery packs, and accumulators should not be disposed of together with the
general household waste. To forward them to recycling or proper disposal, use the
public collection system or return them to HP, your authorized HP Partners, or their
agents.
HP Uninterruptible Power System T2200 XR Models User Guide
A-5
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Electrostatic Discharge
To prevent damaging the system, be aware of the precautions you need to follow when
setting up the system or handling parts. A discharge of static electricity from a finger or other
conductor may damage system boards or other static-sensitive devices. This type of damage
may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
•
•
Avoid hand contact by transporting and storing products in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
•
•
•
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when
handling or installing electrostatic-sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer
chassis. Wrist straps are flexible straps with a minimum of 1 megohm 10 percent
resistance in the ground cords. To provide proper ground, wear the strap snug against the
skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on
both feet when standing on conductive floors or dissipating floor mats.
•
•
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized
reseller install the part.
NOTE: For more information on static electricity, or assistance with product installation, contact your
authorized reseller.
HP Uninterruptible Power System T2200 XR Models User Guide
B-1
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Specifications
This appendix provides the physical, input, and output specifications for the UPS. Topics also
include battery descriptions, battery runtime estimates, and environmental requirements when
operating the UPS.
Physical Specifications
Table C-1: Physical Specifications
Feature
Metric
206 mm
241 mm
483 mm
32 kg
U.S.
8.1 in
9.5 in
19.0 in
70 lb
Dimensions
Width
Height
Depth*
Weight
*With UPS front bezel installed
HP Uninterruptible Power System T2200 XR Models User Guide
C-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Input Specifications
Table C-2: Input Specifications
Utility
Voltage
Frequency
(Hz)
Default
Settings
Nominal
Available
Settings
Utility Voltage
(VAC)
UPS Model
Power Cord Supplied
Voltage (VAC)
T2200 XR NA
50/60
120
110, 120, 1271
Non-detachable
power cord with
NEMA 5-20 plug
T2200 XR JPN
50/60
100
1002
Non-detachable
power cord with
NEMA L5-30 plug
T2200 XR H NA
50/60
50/60
208
230
2083
IEC-320-C14 input
power receptacle
T2200h XR H INT’L
220, 230, 240
IEC-320-C14 input
power receptacle
Note:
1
2
3
120 on battery
110 on battery
220 on battery
Before connecting devices, verify that the UPS will not overload by checking that the rating
of the devices does not exceed the capacity of the UPS. Evenly distribute connected devices
throughout all load segments. Do not exceed the rating of individual receptacles. Connect
devices according to shutdown preference.
After checking that the UPS will not overload, connect the power cords from the devices to
the appropriate output receptacles of the UPS.
WARNING: To prevent risk of personal injury from electric shock, the
UPS T2200 XR H NA and T2200 XR H INT’L models are not suitable for installation
where the total earth (ground) conductor leakage current for all connected devices
exceeds 3.5 mA.
C-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Output Specifications
Table C-3: Output Specifications
Nominal Power
Rating (W)
Load
Segment #
UPS Model
Effective VA
Output Receptacles
T2200 XR NA
1920
1600
1600
1600
1600
1
2
3
1
2
3
1
2
3
1
2
3
3 x 5-15R
3 x 5-15R
2 x 5-20R
T2200 XR JPN
2200
2200
2080
3 x 5-15R
3 x 5-15R
2 x 5-20R
T2200 XR H NA
T2200 XR H INT’L
3 x IEC-320, C13
3 x IEC-320, C13
3 x IEC-320, C13
3 x IEC-320, C13
3 x IEC-320, C13
3 x IEC-320, C13
HP Uninterruptible Power System T2200 XR Models User Guide
C-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Table C-4: Output Specifications
Available Nominal
Output Voltage
(VAC)
Available Nominal
Output Voltage
(VAC) on Battery
Configuration
Setting (VAC)
Characteristics
Voltage
100
100
110
120
127
208
220
230
240
110*
110
120
120
220*
220
230
240
110
120
127
208
220
230
240
Source of Power
Regulation
Output
Tolerance
Utility power
(normal range)
-10% to +6% of nominal output voltage rating
(within the guidelines of the Computer Business
Equipment Manufacturers Association)
Battery power
5% of nominal output voltage rating*
Specification
Feature
Other Features
On-line efficiency
Voltage wave shape
Surge suppression
Noise filtering
95% nominal input voltage
Sine wave; equivalent to input online
High energy 6500 A peak
MOVs and line filter for normal and common
mode use
* +0% to -10% at low battery
Battery Specifications
Table C-5: Battery Specifications
Feature
Type
Specification
Sealed lead-acid; maintenance-free
48 V Battery String
Voltage
Charging
HP recommends 24 hours to allow full charge
Less than 3 hours to 90 percent capacity at default nominal utility voltage and no load
C-4
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Environmental Specifications
Table C-6: Environmental Specifications
Feature
Specification
Operating temperature
10oC to 40oC (50oF to 104oF)
UL-tested at 25oC (77oF)
Non-operating temperature
Operating humidity
-15oC to 55oC (5oF to 131oF)
20% to 80% relative humidity (non-condensing)
5% to 95% relative humidity (non-condensing);
Non-operating humidity
38.7oC (101.7oF) maximum wet bulb temperature with no
cosmetic damage
Operating altitude
Non-operating altitude
Audible noise
Up to 2,000 meters (6,562 feet) above sea level
Up to 9,144 meters (30,000 feet) above sea level
Less than 46 dBA
HP Uninterruptible Power System T2200 XR Models User Guide
C-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
C
alarms See audible alarms
audible alarms
cables
battery connection 4-5
FCC compliance statement A-3
power 1-2
enabling and disabling for Site Wiring Fault
detection 3-2
CE Marking A-3
silencing 2-6
troubleshooting 5-1
circuit protectors 1-2
Comm Port See communications port
Configure button 2-2
B
Bad Battery/Low Battery LED 2-2
batteries
battery connector cables 4-5
care and storage 4-6
determining when to replace 4-2
disposal methods 4-6
installing 4-5
Configure mode
defined 2-2
entering 3-1
obtaining 4-2
precautions 4-1
D
removing 4-4
replacing 4-3
Declaration of Conformity A-2
diagnostics 2-5
specifications C-4
testing 4-6
dimensions C-1
warranty 4-7
E
battery bracket, removing 4-4
boot straps, using B-1
bracket, battery 4-4
buttons
electrostatic discharge See ESD
entering
defined 2-2
illustrated 2-1
HP Uninterruptible Power System T2200 XR Models User Guide
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
F
M
FCC notices
models, UPS 1-2
classification label A-1
modes of operation 2-2
Declaration of Conformity A-2
features
N
NTP See Network Transient Protector
warranty 1-9
Federal Communications Commission notices See
FCC notices
O
Operate mode
defined 2-2
entering 2-3
G
output specifications C-3
overcurrent protection 1-2
Overload LED 2-1
overview
grounding methods B-1
H
hardware options 1-8
heel straps, using B-1
HP website ix
P
panels
front 1-3
rear 1-4
parameters, configuration 3-2
part numbers
humidity specifications C-5
I
hardware options 1-8
kit 1-2
input specifications C-2
installing
batteries 4-5
power cords 1-2
problems See troubleshooting
products, handling, storing, and transporting B-1
protection
K
kit part numbers 1-2
L
overcurrent 1-2
surge 1-2
LEDs
illustrated 2-1
troubleshooting 5-1
load level LEDs 2-1
load protection warranty 1-9
Index-2
HP Uninterruptible Power System T2200 XR Models User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
surge protection 1-2
R
receptacles C-3
regulatory compliance notices
cables A-3
T
Canadian A-3
technical support ix
Class A equipment A-1
European Union A-3
Japanese A-4
troubleshooting
after start 5-2
related documents viii
removing
U
batteries 4-4
Uninterruptible Power System
configuring 3-1
repairing the UPS 5-3
installing 2-1
operating 2-1
overview 1-1
repairing 5-3
S
safety information 4-1
self-test 2-5
specifications C-1
UPS See Uninterruptible Power System
Utility LED 2-2
serial port See communications port
Site Wiring Fault detection, enabling audible
alarms 3-2
V
voltage, configuring 3-3
software See power management software
specifications
W
warranties
battery C-4
$25,000 Computer Load Protection
Guarantee 1-9
pre-failure battery 4-7
weight C-1
environmental C-5
input C-2
output C-3
physical C-1
Standby button 2-2
Standby mode
defined 2-2
entering 2-4
HP Uninterruptible Power System T2200 XR Models User Guide
Index-3
Download from Www.Somanuals.com. All Manuals Search And Download.
|