User Guide
HP Notebook
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation.
The computer and the AC adapter comply with the user-accessible surface temperature limits defined
by the International Standard for Safety of Information Technology Equipment (IEC 60950).
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Safety warning notice
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1 Introduction ..................................................................................................................................................... 1
2 Getting to know your computer ..................................................................................................................... 4
3 Networking .................................................................................................................................................... 14
Creating a wireless connection .......................................................................................................... 15
Configuring a wireless router ............................................................................ 18
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth and Internet Connection Sharing (ICS) ............................................................. 20
4 Pointing devices and keyboard ................................................................................................................... 22
5 Multimedia and other features ..................................................................................................................... 29
6 Managing power ............................................................................................................................................ 33
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
7 External cards and devices .......................................................................................................................... 45
8 Drives ............................................................................................................................................................. 49
9 Securing your computer and information .................................................................................................. 50
10 Backup and recovery .................................................................................................................................. 56
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Setup Utility (BIOS) and System Diagnostics .......................................................................................... 62
Appendix A Troubleshooting and support .................................................................................................... 68
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B Cleaning your computer ............................................................................................................. 72
Appendix C Traveling with the computer ...................................................................................................... 73
Appendix D Updating programs and drivers ................................................................................................ 75
Appendix E Electrostatic Discharge .............................................................................................................. 76
Appendix F Specifications .............................................................................................................................. 77
Index ................................................................................................................................................................... 79
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Introduction
This guide contains details about your computer's components, such as ports and jacks. It describes
multimedia and other features. And it provides important security, backup, and recovery information.
NOTE: Some of the features described in this guide may not be available on your computer.
Important first steps
After you set up and register the computer, it is important to take the following steps:
devices and keyboard on page 22 for additional information.
5. Discover the software that is already installed on the computer by selecting Start > All
Programs.
Important first steps
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding information
The computer comes with several resources to help you perform various tasks.
Resource
Contents
Setup Instructions
●
●
●
●
●
How to set up the computer
Identification of computer components
Computer features
User Guide
To access this guide:
Power management features
Instructions for the following:
Select Start > Help and Support > User Guides.
◦
◦
◦
◦
◦
◦
◦
◦
◦
Connecting to a wireless network
Using the keyboard and pointing devices
Using the multimedia features of the computer
Maximizing battery life
Protecting the computer
Performing a backup and a recovery
Contacting customer support
Caring for the computer
Updating the software
●
●
●
●
●
Computer specifications
Help and Support
Operating system information
Software, driver, and BIOS updates
Troubleshooting tools
To access Help and Support, select Start > Help and
Support.
NOTE: For country- or region-specific support, go to
http://www.hp.com/support, select your country or
region, and follow the on-screen instructions.
Instructions for contacting customer support
Regulatory, Safety and Environmental Notices
To access this guide:
●
●
Regulatory and safety information
Battery disposal information
Select Start > Help and Support > User Guides.
Safety & Comfort Guide
●
●
Proper workstation setup
To access this guide:
Guidelines for posture and work habits that maximize your
comfort and decrease your risk of injury
Select Start > Help and Support > User Guides.
– or –
●
Electrical and mechanical safety information
Worldwide Telephone Numbers booklet
This booklet is provided with your computer.
HP customer support telephone numbers
2
Chapter 1 Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Resource
Contents
HP Web site
●
●
●
●
Customer support information
To access this Web site, go to http://www.hp.com/
Information for ordering parts
Software, driver, and BIOS updates
Information about accessories for the computer
Limited Warranty*
Warranty information
To access the warranty:
Select Start > Help and Support > User Guides.
– or –
*You can find the expressly provided HP Limited Warranty applicable to your product located with the electronic guides on
your computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited
Warranty in the box. For some countries/regions where the warranty is not provided in printed format, you may request a
●
●
●
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd, Boise, ID 83714, USA
Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy
Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507
Please include your product number, warranty period (found on your serial number label), name, and postal address.
IMPORTANT: Do NOT return your HP product to the addresses above. For product support, refer to your product home
Finding information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Getting to know your computer
Top
TouchPad
Component
(1)
Description
TouchPad light
●
●
On: The TouchPad is off.
Off: The TouchPad is on.
(2)
(3)
TouchPad on/off button
TouchPad zone
Turns the TouchPad on or off.
Moves the pointer and selects or activates items on the
screen.
(4)
(5)
Left TouchPad button
Right TouchPad button
Functions like the left button on an external mouse.
Functions like the right button on an external mouse.
4
Chapter 2 Getting to know your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Lights
Component
(1)
Description
Power light
●
●
●
White: The computer is on.
Blinking white: The computer is in the Sleep state.
Off: The computer is off or in Hibernation.
NOTE: For select models, the Intel® Rapid Start
Technology feature is enabled at the factory. Rapid
Start Technology allows your computer to resume
quickly from inactivity. For more information, refer to
(2)
(3)
(4)
Webcam light
Mute light
On: The webcam is in use.
●
●
●
Amber: Computer sound is off.
Off: Computer sound is on.
Wireless light
White: An integrated wireless device, such as a
wireless local area network (WLAN) device and/or a
Bluetooth® device, is on.
●
Amber: All wireless devices are off.
(5)
Caps lock light
On: Caps lock is on.
Top
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and other top components
Component
Description
(1)
(2)
Internal microphone
Power button
Records sound.
●
●
●
●
When the computer is off, press the button to turn on
the computer.
When the computer is on, press the button briefly to
initiate Sleep.
When the computer is in the Sleep state, press the
button briefly to exit Sleep.
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.
To learn more about your power settings, select Start >
Control Panel > System and Security > Power Options.
(3)
Speakers (2)
Produce sound.
6
Chapter 2 Getting to know your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Keys
Component
(1)
Description
esc key
Displays system information when pressed in combination
with the fn key.
(2)
(3)
fn key
Displays system information when pressed in combination
with the esc key.
Windows logo key
Displays the Windows Start menu.
(4)
(5)
Action keys
Execute frequently used system functions.
Windows applications key
Displays a shortcut menu for items beneath the pointer.
Top
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Right side
Component
(1)
Description
USB 2.0 port
Connects optional USB devices.
(2)
Audio-out (headphone) jack/audio-in
(microphone) jack
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or television audio. Also connects an
optional headset microphone.
WARNING! To reduce the risk of personal injury, adjust
the volume before putting on headphones, earbuds, or a
headset. For additional safety information, refer to the
Regulatory, Safety and Environmental Notices.
NOTE: When a device is connected to the jack, the
computer speakers are disabled.
NOTE: The microphone function is operational only when
used with a headphone/microphone unit that has a 4-
conductor audio connector.
8
Chapter 2 Getting to know your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Left side
Component
Description
(1)
(2)
Power connector
Connects an AC adapter.
AC adapter/Battery light
●
White: The computer is connected to external power
and the battery is fully charged.
●
●
Amber: A battery is charging.
Blinking white: The battery charge level is 12% or less
(recharge the battery as soon as possible).
●
Off: The computer is not connected to external power.
(3)
(4)
RJ-45 (network) jack
HDMI port
Connects a network cable.
Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or audio
device.
(5)
(6)
USB 3.0 port
Connects optional USB 3.0 devices and provide enhanced
USB power performance.
NOTE: The USB 3.0 port is also compatible with USB 1.0
and USB 2.0 devices.
Digital Media Slot
Supports the following digital card formats:
●
●
Secure Digital (SD) Memory Card
Secure Digital Extended Capacity (SDxC) Memory
Card
●
●
●
Secure Digital High Capacity (SDHC) Memory Card
Ultra High Speed MultiMediaCard (UHS/MMC)
Blinking white: The hard drive is being accessed.
(7)
(8)
Hard drive light
Power light
NOTE: All references to the hard disk drive in this guide
refer to the solid-state (SSD) drive.
●
●
●
White: The computer is on.
Blinking white: The computer is in the Sleep state.
Off: The computer is off or in Hibernation.
Left side
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Component
Description
(1)
(2)
WLAN antennas (2)*
Webcam
Send and receive wireless signals to communicate with wireless
local area networks (WLANs).
Records video and captures still photographs.
To use the webcam, select Start > All Programs >
Communication and Chat > CyberLink YouCam.
(3)
Internal display switch
Turns off the display or initiates Sleep if the display is closed
while the power is on.
NOTE: The display switch is not visible from the outside of the
computer.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately
around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety,
and Environmental Notices that applies to your country or region. These notices are located in Help and Support.
10 Chapter 2 Getting to know your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear
Component
Description
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to
cool internal components and prevent overheating. It
is normal for the internal fan to cycle on and off during
routine operation.
Rear 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom
Component
Description
Vents (2)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
12 Chapter 2 Getting to know your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Labels
The labels affixed to the computer provide information you may need when you troubleshoot system
problems or travel internationally with the computer:
●
Serial number label—Provides important information, including the following:
Component
(1)
(2)
(3)
(4)
(5)
Product name
Serial number
Product part number
Warranty period
Model description
Have this information available when you contact customer support. The serial number label is
affixed on the bottom of the computer.
●
Microsoft® Certificate of Authenticity—Contains the Windows Product Key. You may need the
Product Key to update or troubleshoot the operating system. The Microsoft Certificate of
Authenticity is affixed on the bottom of the computer.
●
●
Regulatory label—Provides regulatory information about the computer. The regulatory label is
affixed on the bottom of the computer.
Wireless certification label or labels (select models only)—Provide information about optional
wireless devices and the approval markings of some of the countries or regions in which the
devices have been approved for use. You may need this information when traveling
internationally. If your computer model includes one or more wireless devices, one or more
certification labels are included with your computer. Wireless certification labels are affixed to the
bottom of the computer.
Labels 13
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Networking
Your computer supports two types of Internet access:
●
●
NOTE: You must set up Internet service before you can connect to the Internet.
Using an Internet service provider
Before you can connect to the Internet, you must establish an account with an Internet service
provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set
up the modem, install a network cable to connect your wireless computer to the modem, and test the
Internet service.
NOTE: Your ISP will give you a user ID and password to access the Internet. Record this
information and store it in a safe place.
The following features will help you set up a new Internet account or configure the computer to use an
existing account:
●
Internet Services & Offers (available in some locations)—This utility assists with signing up
for a new Internet account and configuring the computer to use an existing account. To access
this utility, select Start > All Programs > Online Services > Get Online.
●
ISP-provided icons (available in some locations)—These icons may be displayed either
individually on the Windows desktop or grouped in a desktop folder named Online Services. To
set up a new Internet account or configure the computer to use an existing account, double-click
an icon, and then follow the on-screen instructions.
●
Windows Connect to the Internet Wizard—This wizard allows you to connect to the Internet in
any of the following situations:
◦
◦
You already have an account with an ISP.
You do not have an Internet account and want to select an ISP from the list provided within
the wizard. (The list of ISP providers is not available in all regions.)
◦
You have selected an unlisted ISP, and the ISP has provided you with information such as
a specific IP address and POP3 and SMTP settings.
To access the Windows Connect to the Internet Wizard and instructions for using it, select
Start > Control Panel > Network and Internet > Network and Sharing Center.
14 Chapter 3 Networking
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If you are prompted within the wizard to choose between enabling or disabling
Windows Firewall, choose to enable the firewall.
Creating a wireless connection
Your computer may be equipped with one or more of the following wireless devices:
●
●
Wireless local area network (WLAN) device
Bluetooth® device
For more information on wireless technology, refer to the information and Web site links provided in
Help and Support.
Identifying wireless and network status icons
Icon
Name
Description
HP Connection Manager
Opens HP Connection Manager, which enables you to create and manage
WLAN, and Bluetooth connections.
Wired network (connected)
Indicates that one or more network devices are connected to the network.
Network (disabled/
disconnected)
Indicates that all network devices are disabled in Windows Control Panel.
Network (connected)
Indicates that one or more network devices are connected to a network.
Indicates that network devices are not connected to a network.
Network (disconnected)
Network (disabled/
disconnected)
Indicates that no wireless connections are available.
Creating a wireless connection 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning wireless devices on or off
You can use the wireless key or HP Connection Manager (select models only) to turn on and turn off
location of the wireless key on your computer.
To turn off wireless devices using HP Connection Manager:
▲
Right-click the HP Connection Manager icon in the notification area, at the far right of the
taskbar, and then click the power button next to the desired device.
– or –
Select Start > All Programs > HP Help and Support > HP Connection Manager, and then
click the power button next to the desired device.
Using HP Connection Manager
HP Connection Manager provides a central location for managing your wireless devices. HP
Connection Manager allows you to manage the following devices:
●
●
Wireless local area network (WLAN)/Wi-Fi)
Bluetooth®
HP Connection Manager provides information and notifications on connection status and power
status. Status information and notifications are provided in the notification area, at the far right of the
taskbar.
To open HP Connection Manager:
▲
Click the HP Connection Manager icon in the notification area, at the far right of the taskbar.
– or –
Select Start > All Programs > HP Help and Support > HP Connection Manager.
For more information, refer to the HP Connection Manager software Help.
Using operating system controls
The Network and Sharing Center allows you to set up a connection or network, connect to a network,
manage wireless networks, and diagnose and repair network problems.
To use operating system controls:
▲
Select Start > Control Panel > Network and Internet > Network and Sharing Center.
For more information, select Start > Help and Support.
Using a WLAN
A wireless connection connects the computer to Wi-Fi networks, or WLANs. A WLAN is composed of
other computers and accessories that are linked by a wireless router or a wireless access point.
16 Chapter 3 Networking
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an existing WLAN
To connect to an existing WLAN:
2. Click the network icon in the notification area, at the far right of the taskbar.
3. Select your WLAN from the list.
4. Click Connect.
If the network is a security-enabled WLAN, you are prompted to enter a network security code.
Type the code, and then click OK to complete the connection.
NOTE: If no WLANs are listed, you are out of range of a wireless router or access point.
NOTE: If you do not see the WLAN you want to connect to, click Open Network and Sharing
Center, and then click Set up a new connection or network. A list of options is displayed. You
can choose to manually search for and connect to a network or to create a new network
connection.
After the connection is made, you can place the mouse pointer over the network icon in the
notification area, at the far right of the taskbar, to verify the name and status of the connection.
NOTE: The functional range (how far your wireless signals travel) depends on WLAN
implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.
Using a WLAN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up a new WLAN network
Required equipment:
●
A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from
an Internet service provider (ISP)
A wireless router (purchased separately) (2)
Your new wireless computer (3)
●
●
NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type
of modem you have.
The illustration shows an example of a completed WLAN network installation that is connected to the
Internet. As your network grows, additional wireless and wired computers can be connected to the
network to access the Internet.
Configuring a wireless router
For help in setting up a WLAN, refer to the information provided by your router manufacturer or your
ISP.
The Windows operating system also provides tools to help you set up a new wireless network. To use
the Windows tools to set up your network, select Start > Control Panel > Network and Internet >
Network and Sharing Center > Set up a new connection or network > Set up a new network.
Then follow the on-screen instructions.
NOTE: It is recommended that you initially connect your new wireless computer to the router by
using the network cable provided with the router. When the computer successfully connects to the
Internet, you can disconnect the cable, and then access the Internet through your wireless network.
18 Chapter 3 Networking
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting your WLAN
When you set up a WLAN or access an existing WLAN, always enable security features to protect
your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and
airports may not provide any security. If you are concerned about the security of your computer in a
hotspot, limit your network activities to e-mail that is not confidential and basic Internet surfing.
Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected
signals. You can take the following precautions to protect your WLAN:
●
Firewall—A firewall checks both data and requests for data that are sent to your network, and
discards any suspicious items. Firewalls are available in both software and hardware. Some
networks use a combination of both types.
●
Wireless encryption—Your computer supports three encryption protocols:
◦
◦
◦
Wi-Fi Protected Access (WPA)
Wi-Fi Protected Access II (WPA2)
Wired Equivalent Privacy (WEP)
NOTE: HP recommends that you select WPA2, which is the most advanced of the three encryption
protocols. The use of WEP encryption is not recommended, because it can be overcome with little
effort.
●
Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) use security standards to
encrypt and decrypt data transmitted over the network. Both WPA and WPA2 dynamically
generate a new key for every packet, and they also generate a different set of keys for each
computer network. To accomplish this:
◦
WPA uses Advanced Encryption Standard (AES) and Temporal Key Integrity Protocol
(TKIP)
◦
WPA2 uses Cipher Block Chaining Message Authentication Code Protocol (CCMP), which
is a new AES protocol.
●
Wired Equivalent Privacy (WEP) encrypts data with a WEP key before it is transmitted. Without
the correct key, others will not be able to use the WLAN.
Roaming to another network
When you move your computer within range of another WLAN, Windows attempts to connect to that
network. If the attempt is successful, your computer is automatically connected to the new network. If
Windows does not recognize the new network, follow the same procedure you used initially to
connect to your WLAN.
Using a WLAN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Bluetooth wireless devices
A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as the following:
●
●
●
●
●
Computers
Phones
Imaging devices (cameras and printers)
Audio devices
Mouse
Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network
(PAN) of Bluetooth devices. For information on configuring and using Bluetooth devices, refer to the
Bluetooth software Help.
Bluetooth and Internet Connection Sharing (ICS)
HP does not recommend setting up one computer with Bluetooth as a host and using it as a gateway
through which other computers may connect to the Internet. When two or more computers are
connected using Bluetooth, and Internet Connection Sharing (ICS) is enabled on one of the
computers, the other computers may not be able to connect to the Internet using the Bluetooth
network.
The strength of Bluetooth is in synchronizing information transfers between your computer and
wireless devices including cellular phones, printers, cameras, and PDAs. The inability to consistently
connect two or more computers to share the Internet through Bluetooth is a limitation of Bluetooth
and the Windows operating system.
20 Chapter 3 Networking
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a wired network
Connecting to a local area network (LAN)
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
To connect the network cable:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the network cable into a network wall jack (2) or router.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
modem cable or telephone cable into an RJ-45 (network) jack.
Connecting to a wired network 21
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Pointing devices and keyboard
Using pointing devices
NOTE: In addition to the pointing devices included with your computer, you can use an external
USB mouse (purchased separately) by connecting it to one of the USB ports on the computer.
Setting pointing device preferences
Use Mouse Properties in Windows® to customize pointing device settings, button configuration, click
speed, and pointer options.
To access Mouse Properties, select Start > Devices and Printers. Then right-click the listing that
represents your computer, and select Mouse settings.
Using the TouchPad
NOTE: The TouchPad on your computer may look slightly different from the illustrations in this
TouchPad on your computer.
To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go.
Use the left and right TouchPad buttons as you would use the buttons on an external mouse.
22 Chapter 4 Pointing devices and keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the TouchPad off or on
To turn the TouchPad off or on, quickly double-tap the TouchPad on/off button.
NOTE: The TouchPad light is off when the TouchPad is on.
The TouchPad light and onscreen display icons indicate the TouchPad status when the TouchPad is
turned off or on. The following table shows and describes the TouchPad display icons.
TouchPad light
Icon
Description
Amber
Indicates that the TouchPad is off.
Off
Indicates that the TouchPad is on.
Using pointing devices 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating
To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go.
Selecting
Use the left and right TouchPad buttons as you would use the corresponding buttons on an external
mouse.
24 Chapter 4 Pointing devices and keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TouchPad gestures
The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the
TouchPad at the same time.
NOTE: TouchPad gestures are not supported in all programs.
To view the demonstration of a gesture:
1. Select Start > Control Panel > Hardware and Sound > Synaptics ClickPad.
2. Click a gesture to activate the demonstration.
To turn the gestures on or off:
1. Select Start > Control Panel > Hardware and Sound > Synaptics ClickPad.
2. Select the check box next to the gesture that you want to turn on or off.
3. Click Apply, and then click OK.
Using pointing devices 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Scrolling
Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers
slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right
motion.
NOTE: Scrolling speed is controlled by finger speed.
NOTE: Two-finger scrolling is enabled at the factory.
Pinching/Zooming
Pinching allows you to zoom in or out on images or text.
●
●
Zoom in by placing two fingers together on the TouchPad, and then moving them apart.
Zoom out by placing two fingers apart on the TouchPad, and then moving them together.
NOTE: Pinching/zooming is enabled at the factory.
26 Chapter 4 Pointing devices and keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the keyboard
Using the action keys
An action key performs an assigned function. The icon on each of the f1 through f12 keys illustrates
the assigned function for that key.
To use an action key function, press and hold the key.
The action key feature is enabled at the factory. You can disable the action key feature and revert
back to standard settings. Using standard settings, you press the fn key and one of the function keys
to activate the assigned function. For instructions, refer to Using Setup Utility (BIOS) on page 62.
CAUTION: Use extreme care when making changes in Setup Utility. Errors can prevent the
computer from operating properly.
Icon
Key
Description
f1
Opens Help and Support, which provides tutorials, information about your Windows
operating system and computer, answers to questions, and updates to your computer.
Help and Support also provides automated troubleshooting tools and access to
customer support.
f2
f3
f4
Decreases the screen brightness level incrementally as long as you hold down the
key.
Increases the screen brightness level incrementally as long as you hold down the key.
Switches the screen image among display devices connected to the system. For
example, if a monitor is connected to the computer, pressing this key alternates the
screen image from the computer display to the monitor display to a simultaneous
display on both the computer and the monitor.
f5
Turns the keyboard backlight on or off.
NOTE: The keyboard backlight is turned on at the factory. To extend battery life,
turn off the keyboard backlight.
f6
Plays the previous track of an audio CD or the previous section of a DVD or a BD.
Plays, pauses, or resumes a track of an audio CD or a section of a DVD or a BD.
Plays the next track of an audio CD or the next section of a DVD or a BD.
Decreases speaker volume incrementally as long as you hold down the key.
Increases speaker volume incrementally as long as you hold down the key.
f7
f8
f9
f10
Using the keyboard 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Icon
Key
Description
f11
Mutes or restores speaker sound.
f12
Turns the wireless feature on or off.
NOTE: A wireless network must be set up before a wireless connection is possible.
Using the hotkeys
A hotkey is a combination of the fn key, and the esc key.
To use a hotkey:
▲
Briefly press the fn key, and then briefly press the second key of the hotkey combination.
Function
Display system information.
Hotkey
Description
fn+esc
Displays information about system hardware components and the
system BIOS version number.
28 Chapter 4 Pointing devices and keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Multimedia and other features
Your computer includes the following:
●
●
●
●
●
Two integrated speakers
One integrated microphone
Integrated webcam
Preinstalled multimedia software
Multimedia keys
Using the media activity controls
Your computer has media action keys that allow you to play, pause, fast forward, or rewind a media
file. Refer to Using the action keys on page 27 for information about your computer's media activity
controls.
Audio
Your computer provides a variety of audio-related opportunities:
●
●
●
●
●
●
●
Play music.
Record sound.
Download music from the Internet.
Create multimedia presentations.
Transmit sound and images with instant messaging programs.
Stream radio programs.
Create (burn) audio CDs using an optional external optical drive (purchased separately).
Using the media activity controls 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the volume
more information.
WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and
Environmental Notices.
NOTE: Volume can also be controlled through the operating system and some programs.
Checking audio functions on the computer
NOTE: For best results when recording, speak directly into the microphone and record sound in a
setting free of background noise.
To check the audio functions on your computer, follow these steps:
1. Select Start > Control Panel > Hardware and Sound > Sound.
2. When the Sound window opens, click the Sounds tab. Under Program Events, select any sound
event, such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1. Select Start > All Programs > Accessories > Sound Recorder.
2. Click Start Recording and speak into the microphone. Save the file to your desktop.
3. Open a multimedia program and play back the sound.
To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware
and Sound > Sound.
30 Chapter 5 Multimedia and other features
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Wireless Display (select models only)
Intel® Wireless Display allows you to share your computer content wirelessly on your TV. To
experience wireless display, a wireless third-party TV adapter (purchased separately) is required.
Content that asserts output protection, such as Blu-ray discs, will not play on Intel Wireless Display.
For details about using the wireless adapter, refer to the device manufacturer's instructions.
NOTE: Be sure that wireless is enabled on your computer before using the wireless display.
NOTE: Intel Wireless Display does not support 3D playback on external display devices.
Webcam
Your computer includes an integrated webcam, located at the top of the display. With the preinstalled
software, you can use the webcam to take a photo or record a video. You can preview and save the
photo or video recording.
The webcam software enables you to experiment with the following features:
●
●
●
Capturing and sharing video
Streaming video with instant message software
Taking still photos
To access the webcam, select Start > All Programs > Communication and Chat > CyberLink
YouCam.
For information on using the webcam, select Start > Help and Support.
Intel Wireless Display (select models only) 31
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
The HDMI (High Definition Multimedia Interface) port connects the computer to an optional video or
audio device, such as a high-definition television, or to any compatible digital or audio component.
NOTE: To transmit video and/or audio signals through the HDMI port, you need an HDMI cable
(purchased separately).
One HDMI device can be connected to the HDMI port on the computer. The information displayed on
the computer screen can be simultaneously displayed on the HDMI device.
1. Connect one end of the HDMI cable to the HDMI port on the computer.
2. Connect the other end of the cable to the video device, and then refer to the device
manufacturer’s instructions for additional information.
Configuring audio for HDMI
To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to the
HDMI port on your computer. Then configure the default audio playback device as follows:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then
click Playback devices.
2. On the Playback tab, click either Digital Output or Digital Output Device (HDMI).
3. Click Set Default, and then click OK.
To return audio to the computer speakers, follow these steps:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then
click Playback devices.
2. On the Playback tab, click Speakers.
3. Click Set Default, and then click OK.
32 Chapter 5 Multimedia and other features
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Managing power
Your computer can operate on either battery power or external AC power. When the computer is only
running on battery power and an AC power source is not available to charge the battery, it is
important to monitor and conserve the battery charge. Your computer supports power plans to
manage how your computer uses and conserves power so that you can balance computer
performance with power conservation.
IMPORTANT: Do not attempt to replace your computer battery, which is installed at the factory.
Your computer has an internal rechargeable battery that can be replaced only by an authorized
service provider. To monitor the status of your battery, or if the battery is no longer holding a charge,
run Battery Check in Help and Support. If Battery Check indicates that your battery should be
replaced, contact customer support.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initiating Sleep or Hibernation
Microsoft® Windows® has two power-saving states, Sleep and Hibernation.
NOTE: The Rapid Start Technology feature allows your computer to resume quickly from inactivity.
Rapid Start Technology manages your power-saving options as follows:
●
Sleep – Rapid Start Technology allows you to select the Sleep state. To exit from Sleep, press
any key, activate the TouchPad/Imagepad, or press the power button briefly.
●
Hibernation - Rapid Start Technology controls Hibernation management and initiates Hibernation
automatically under the following conditions:
◦
◦
After 2 hours of inactivity when running on battery or external power
When the remaining battery charge reaches a critical level
After Hibernation is initiated, press the power button to resume your work.
Because Hibernation is controlled by Rapid Start Technology, Hibernation does not display as an
option.
NOTE: Rapid Start Technology is enabled at the factory and can be disabled in Setup Utility (BIOS).
If Rapid Start Technology is disabled in Setup Utility (BIOS), Hibernation options are available to be
actively selected.
In the Sleep state, the screen clears, and your work is saved to memory, letting you exit Sleep faster
than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery
reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.
In the Hibernation state, your work is saved to a hibernation file on the hard drive and the computer
turns off.
CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video
playback functionality, or loss of information, do not initiate Sleep or Hibernation while reading from or
writing to a disc using an optional external optical drive (purchased separately) or an external media
card.
NOTE: You cannot initiate any type of networking connection or perform any computer functions
while the computer is in the Sleep state or in Hibernation.
Initiating and exiting Sleep
The system is set at the factory to initiate Sleep after a period of inactivity when running on battery
power or on external power.
Power settings and timeouts can be changed using Power Options in Windows Control Panel.
With the computer on, you can initiate Sleep in any of the following ways:
●
●
●
Briefly press the power button.
Close the display.
Select Start, click the arrow next to the Shut down button, and then click Sleep.
34 Chapter 6 Managing power
Download from Www.Somanuals.com. All Manuals Search And Download.
To exit Sleep:
●
●
●
●
Briefly press the power button.
If the display is closed, open the display.
Press a key on the keyboard.
Tap or swipe the TouchPad.
When the computer exits Sleep, the power lights turn on and the computer returns to the screen
where you stopped working.
NOTE: If you have set a password to be required on wakeup, you must enter your Windows
password before the computer will return to the screen.
Initiating and exiting Hibernation
Power settings and timeouts can be changed in Windows Control Panel.
To initiate Hibernation, select Start, click the arrow next to the Shut down button, and then click
Hibernate.
To exit Hibernation, briefly press the power button.
The power lights turn on and your work returns to the screen where you stopped working.
NOTE: If you have set a password to be required on wakeup, you must enter your Windows
password before your work will return to the screen.
Setting password protection on wakeup
To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow
these steps:
1. Select Start > Control Panel > System and Security > Power Options.
2. In the left pane, click Require a password on wakeup.
3. Click Change Settings that are currently unavailable.
4. Click Require a password (recommended).
NOTE: If you need to create a user account password or change your current user account
password, click Create or change your user account password, and then follow the on-
screen instructions. If you do not need to create or change a user account password, go to step
5.
5. Click Save changes.
Initiating Sleep or Hibernation 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the power meter
The power meter is located in the notification area, at the far right of the taskbar. The power meter
allows you to quickly access power settings and view the remaining battery charge.
●
To display the percentage of remaining battery charge and the current power plan, move the
pointer over the power meter icon.
●
To access Power Options, or to change the power plan, click the power meter icon and select an
item from the list.
Different power meter icons indicate whether the computer is running on battery or external power.
The icon also displays a message if the battery has reached a low or critical battery level.
36 Chapter 6 Managing power
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a power plan
A power plan manages how the computer uses power and helps you conserve power and maximize
performance.
The following power plans are available:
●
●
●
HP Recommended. Automatically balances performance with energy consumption.
Power Saver. Saves power by reducing system performance and screen brightness.
High Performance. Favors performance, but may use more energy.
You can also create your own power plan and customize it to how you use the computer for your
needs.
Use HP Power Manager (select models only) or Windows Control Panel to select a power plan or to
create your own plan.
To start HP Power Manager, select Start > Control Panel > Hardware and Sound > HP Power
Manager.
To access the Power Options in the Control Panel, select Start > Control Panel > System and
Security > Power Options, and then select a power plan from the list.
Selecting a power plan 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Running on battery power
When a charged battery is in the computer and the computer is not plugged into external power, the
computer runs on battery power. If the computer has a charged battery installed and the AC adapter
is disconnected from the computer, the computer automatically switches to battery power and the
display brightness decreases to conserve battery life. The battery in the computer slowly discharges
when the computer is off and unplugged from external power.
Computer battery life varies, depending on power management settings, programs running on the
computer, display brightness, external devices connected to the computer, and other factors.
Finding battery information
Help and Support provides the following tools and information about the battery:
●
●
Battery Check tool in Help and Support to test battery performance
Information on calibration, power management, and proper care and storage to maximize battery
life
●
Information on battery types, specifications, life cycles, and capacity
To access battery information, select Start > Help and Support > Learn > Power Plans:
Frequently Asked Questions.
Conserving battery power
Tips for conserving battery power and maximizing battery life:
●
●
●
●
Lower the brightness on the display.
Select the Power saver setting in Power Options.
Turn off wireless when you are not using them.
Disconnect unused external devices that are not plugged into an external power source, such as
an external hard drive connected to a USB port.
●
●
Stop, disable, or remove any external media cards that you are not using.
Before you leave your work, initiate Sleep or Hibernation, or shut down the computer.
Identifying low battery levels
When a battery that is the sole power source for the computer reaches a low or critical battery level,
the following behavior occurs:
●
The AC adapter/battery light indicates a low or critical battery level.
– or –
The power meter icon in the notification area shows a low or critical battery notification.
●
NOTE: For additional information about the power meter, refer to “Using the power meter”
section.
38 Chapter 6 Managing power
Download from Www.Somanuals.com. All Manuals Search And Download.
The computer takes the following actions for a critical battery level:
●
If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
Hibernation.
●
If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains
briefly in the Sleep state, and then shuts down and loses any unsaved information.
Resolving a low battery level
Resolving a low battery level when external power is available
●
●
●
Connect an AC adapter.
Connect an optional docking or expansion device.
Connect an optional power adapter purchased as an accessory from HP.
Resolving a low battery level when no power source is available
●
●
Initiate Hibernation.
Save your work and shut down the computer.
Resolving a low battery level when the computer cannot exit Hibernation
When the computer lacks sufficient power to exit Hibernation, follow these steps:
1. Connect the AC adapter to the computer and to external power.
2. Exit Hibernation by pressing the power button.
Running on external AC power
For information on connecting to AC power, refer to the Setup Instructions poster provided in the
computer box.
The computer does not use battery power when the computer is connected to AC external power with
an approved AC adapter or an optional docking/expansion device.
WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer,
a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connect the computer to external AC power under any of the following conditions:
WARNING! Do not charge the computer battery while you are onboard aircraft.
●
●
●
When charging or calibrating a battery
When installing or modifying system software
When writing information to a disc using an optional external optical drive (purchased
separately)
●
When performing a backup or recovery
Running on external AC power 39
Download from Www.Somanuals.com. All Manuals Search And Download.
When you connect the computer to external AC power:
●
●
●
The battery begins to charge.
The display brightness increases.
The power meter icon in the notification area changes appearance.
When you disconnect external AC power, the following events occur:
●
●
The computer switches to battery power.
The display brightness automatically decreases to save battery life.
Troubleshooting an AC adapter
Contact customer support if the AC adapter if the computer exhibits any of the following symptoms
when it is connected to AC power:
●
●
●
The computer does not turn on.
The display does not turn on.
The power lights are off.
To test the AC adapter:
1. Shut down the computer.
2. Connect the AC adapter to the computer, and then plug it into an AC outlet.
3. Turn on the computer.
●
●
If the power lights turn on, the AC adapter is working properly.
If the power lights remain off, check the connection from the AC adapter to the computer
and the connection from the AC adapter to the AC outlet to make sure the connections are
secure.
●
If the connections are secure and the power lights remain off, the AC adapter is not
functioning and should be replaced.
Contact customer support for information on obtaining a replacement AC power adapter.
40 Chapter 6 Managing power
Download from Www.Somanuals.com. All Manuals Search And Download.
HP CoolSense
HP CoolSense
automatically detects when the computer is not in a stationary position and
adjusts performance and fan settings to keep the surface temperature of your computer at the
optimum level of comfort.
When HP CoolSense is off, the position of the computer is not detected and the performance and fan
options remain at the factory setting. As a result, the surface temperature of the computer may be
higher than it would be with HP CoolSense on.
To turn CoolSense off or on, follow these steps:
1. Select Start > Control Panel > Hardware and Sound > HP CoolSense.
2. Select On or Off.
HP CoolSense 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Refreshing your software content
When the computer is in the Sleep state, Intel® Smart Connect Technology periodically causes the
computer to exit Sleep. Smart Connect then updates the content for certain open applications and
reinitiates Sleep. As a result, your work is immediately available to you as soon as you exit Sleep.
You do not have to wait while updates are downloaded and installed.
▲
To open Intel Smart Connect to disable this feature or manually adjust the settings, select Start
> All Programs > Intel > Intel Smart Connect Technology.
For additional information and a list of supported applications, see the software Help.
42 Chapter 6 Managing power
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting your computer with Rapid Start Technology
When the computer is powered on, Intel® Rapid Start Technology gets your system up and running
in seconds, saving time and battery life.
▲
To open Intel Rapid Start technology to enable this feature or manually adjust the settings,
select Start > All Programs > Intel > Intel Rapid Start Technology.
Starting your computer with Rapid Start Technology 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Shutting down the computer
CAUTION: Unsaved information is lost when the computer shuts down.
The Shut down command closes all open programs, including the operating system, and then turns
off the display and computer.
Shut down the computer under any of the following conditions:
●
When you are connecting an external hardware device that does not connect to a USB or video
port
●
When the computer will be unused and disconnected from external power for an extended
period
Although you can shut down the computer with the power button, the recommended procedure is to
use the Windows Shut down command:
NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or
Hibernation before shutdown is possible.
1. Save your work and close all open programs.
2. Select Start > Shut down.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try
the following emergency procedures in the sequence provided:
●
●
●
Press ctrl+alt+delete, and then click the power Shut down icon on the display.
Press and hold the power button for at least 5 seconds.
Disconnect the computer from external power.
44 Chapter 6 Managing power
Download from Www.Somanuals.com. All Manuals Search And Download.
7 External cards and devices
Using Digital Media Slot cards
Optional digital cards provide secure data storage and convenient data sharing. These cards are
often used with digital media–equipped cameras and PDAs as well as with other computers.
To determine the digital card formats that are supported on your computer, refer to Left side
Inserting a digital card
CAUTION: To reduce the risk of damage to the digital card connectors, use minimal force to insert
a digital card.
1. Hold the card label-side up, with the connectors facing the computer.
2. Insert the card into the Digital Media Slot, and then press in on the card until it is firmly seated.
You will hear a sound when the device has been detected, and a menu of options may be
displayed.
Using Digital Media Slot cards 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing a digital card
CAUTION: To reduce the risk of loss of data or an unresponsive system, use the following
procedure to safely remove the digital card.
1. Save your information and close all programs associated with the digital card.
2. Click the remove hardware icon in the notification area, at the far right of the taskbar. Then
follow the on-screen instructions.
3. Remove the card from the slot .
NOTE: If the card does not eject, pull the card out of the slot.
Using a USB device
Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub.
Some USB devices may require additional support software, which is usually included with the
device. For more information about device-specific software, refer to the manufacturer's instructions.
These instructions may be provided with the software, on disc, or on the manufacturer’s Web site.
Your computer has one USB 2.0 port and one USB 3.0 port.
NOTE: Your computer model is equipped with one USB 3.0 port, which connects an optional USB
3.0 devices and provides enhanced USB power performance. USB 3.0 ports are also compatible with
USB 1.0 and 2.0 devices.
An optional docking device or USB hub provides additional USB ports that can be used with the
computer.
46 Chapter 7 External cards and devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a USB device
CAUTION: To reduce the risk of damage to a USB connector, use minimal force to connect the
device.
▲
Connect the USB cable for the device to the USB port.
NOTE: The USB port on your computer may look slightly different from the illustration in this
section.
You will hear a sound when the device has been detected.
NOTE: The first time you connect a USB device, a message in the notification area lets you know
that the device is recognized by the computer.
Removing a USB device
CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove
the USB device.
CAUTION: To reduce the risk of loss of information or an unresponsive system, use the following
procedure to safely remove the USB device.
1. To remove a USB device, save your information and close all programs associated with the
device.
2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and then
follow the on-screen instructions.
3. Remove the device.
Using a USB device 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using optional external devices
NOTE: For more information about required software and drivers, or to learn which computer port to
use, refer to the manufacturer's instructions.
To connect an external device to the computer:
CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be
sure that the device is turned off and the AC power cord is unplugged.
1. Connect the device to the computer.
2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet.
3. Turn on the device.
To disconnect an unpowered external device, turn off the device, and then disconnect it from the
computer. To disconnect a powered external device, turn off the device, disconnect it from the
computer, and then unplug the AC power cord.
Using optional external drives
Removable external drives expand your options for storing and accessing information. A USB drive
can be added by connecting the drive to a USB port on the computer.
USB drives include the following types:
●
●
●
●
1.44-megabyte diskette drive
Hard drive module (a hard drive with an adapter attached)
Optional external optical drive (CD, DVD, and Blu-ray) (purchased separately)
MultiBay device
48 Chapter 7 External cards and devices
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Drives
Handling drives
CAUTION: Drives are fragile computer components that must be handled with care. Refer to the
following cautions before handling external drives. Additional cautions are included with the
procedures to which they apply.
NOTE: All references to the hard disk drive in this guide refer to the solid-state (SSD) drive.
Observe these precautions:
●
●
●
Before you move a computer that is connected to an external hard drive, initiate Sleep and allow
the screen to clear, or properly disconnect the external hard drive.
Do not type on the keyboard or move the computer while an optional external optical drive
(purchased separately) is writing to a disc. The write process is sensitive to vibration.
When the battery is the only source of power, be sure that the battery is sufficiently charged
before writing to media.
●
●
●
●
Avoid exposing a drive to temperature or humidity extremes.
Avoid exposing a drive to liquids. Do not spray the drive with cleaning products.
Remove media from a drive before traveling with, shipping, or storing a drive.
Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport
walk-through devices and security wands. Airport conveyer belts and similar security devices
that check carry-on baggage use X-rays instead of magnetism and do not damage drives.
Handling drives 49
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Securing your computer and
information
Computer security is essential for protecting the confidentiality, integrity, and availability of your
information. Standard security solutions provided by the Windows® operating system, HP
applications, the non–Windows lity (BIOS), and other third-party software can help protect your
computer from a variety of risks, such as viruses, worms, and other types of malicious code.
IMPORTANT: Some security features listed in this chapter may not be available on your computer.
Computer risk
Security feature
Unauthorized use of the computer
Computer viruses
●
Power-on password
Antivirus software
Firewall software
Administrator password
Unauthorized access to data
Unauthorized access to Setup Utility (BIOS) settings and
other system identification information
Ongoing or future threats to the computer
Software updates
User password
Unauthorized access to a Windows user account
50 Chapter 9 Securing your computer and information
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating your security software (select models only)
HP Security Assistant provides a starting location for you to quickly access a collection of security
software applications that are organized by task. Instead of searching for each application through the
Start menu and Control Panel, HP Security Assistant allows you to access the applications for the
following security tasks:
●
●
●
●
Set up Internet and anti-virus security
Back up and recover files
Manage passwords, user accounts, and parental controls
Maintain your computer and install the latest HP and Windows updates
To open HP Security Assistant, select Start > All Programs > Security and Protection > HP
Security Assistant.
Using passwords
A password is a group of characters that you choose to secure your computer information and to
have safer online transactions. Several types of passwords can be set. For example, when you set up
your computer for the first time, you were asked to set up a user password to secure your computer.
Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on
your computer.
You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows
security feature.
Use the following tips for creating and saving passwords:
●
To reduce the risk of being locked out of the computer, record each password and store it in a
secure place away from the computer. Do not store passwords in a file on the computer.
●
●
●
●
When creating passwords, follow requirements set by the program.
Change your passwords at least every three months.
An ideal password is long and has letters, punctuation, symbols, and numbers.
Before you send your computer for service, back up your files, delete confidential files, and then
remove all password settings.
For additional information about Windows passwords, such as screen-saver passwords, select Start
> Help and Support.
Setting Windows passwords
Password
Function
User password
Protects access to a Windows user account. It also must be
entered when you exit Sleep or Hibernation.
Administrator password
Protects administrator-level access to computer contents.
NOTE: This password cannot be used to access Setup
Utility (BIOS) contents.
Locating your security software (select models only) 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting passwords in Setup Utility (BIOS)
Password
Function
Administrator password*
●
●
Must be entered each time you access Setup Utility
(BIOS).
If you forget your administrator password, you cannot
access Setup Utility (BIOS).
NOTE: The administrator password can be used in place of
the power-on password.
NOTE: Your administrator password is not interchangeable
with an administrator password set in Windows, nor is it
displayed as it is set, entered, changed, or deleted.
NOTE: If you enter the power-on password at the first
password check before the “Press the ESC key for Startup
Menu” message is displayed, you must enter the
administrator password to access Setup Utility (BIOS).
Power-on password*
●
Must be entered each time you turn on or restart the
computer, or exit Hibernation.
●
If you forget your power-on password, you cannot turn
on or restart the computer, or exit Hibernation.
NOTE: The administrator password can be used in place of
the power-on password.
NOTE: A power-on password is not displayed as it is set,
entered, changed, or deleted.
To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):
1. Open Setup Utility (BIOS) by turning on or restarting the computer. While the “Press the ESC
key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc.
2. Use the arrow keys and follow the on-screen instructions. When the Startup Menu is displayed,
press f10.
3. Use the arrow keys to select Security, and then follow the on-screen instructions.
Your changes take effect when the computer restarts.
52 Chapter 9 Securing your computer and information
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Internet security software
When you use your computer to access email, a network, or the Internet, you potentially expose your
computer to computer viruses, spyware, and other online threats. To help protect your computer,
Internet security software that includes antivirus and firewall features may be preinstalled on your
computer as a trial offer. To provide ongoing protection against newly discovered viruses and other
security risks, security software must be kept up to date. It is strongly recommended that you upgrade
the security software trial offer or purchase the software of your choice in order to fully protect your
computer.
Using antivirus software
Computer viruses can disable programs, utilities, or the operating system, or cause them to function
abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any
damage they have caused.
For more information about computer viruses, type viruses in the Search box in Help and Support.
Using firewall software
Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be
software you install on your computer and/or network, or it can be a combination of both hardware
and software.
There are two types of firewalls to consider:
●
●
Host-based firewalls—Software that protects only the computer it is installed on.
Network-based firewalls—Installed between your DSL or cable modem and your home network
to protect all the computers on the network.
When a firewall is installed on a system, all data sent to and from the system is monitored and
compared with a set of user-defined security criteria. Any data that does not meet those criteria is
blocked.
Using Internet security software 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing software updates
HP, Microsoft Windows, and third-party software installed on your computer should be regularly
updated to correct security problems and improve software performance.
Installing Windows security updates
Updates to the operating system and other software may have become available after the computer
left the factory. Microsoft® sends out alerts regarding critical updates. To protect the computer from
security breaches and computer viruses, install all critical updates from Microsoft as soon as you
receive an alert.
To be sure that all available updates are installed on the computer, observe these guidelines:
●
Run Windows Update as soon as possible after you set up your computer. Select Start > All
Programs > Windows Update.
●
●
Run Windows Update monthly thereafter.
Obtain updates to Windows and other Microsoft programs, as they are released, from the
Microsoft website and through the updates link in Help and Support.
Installing HP and third-party software updates
HP recommends that you regularly update the software and drivers that were originally installed on
you can also register to receive automatic update notifications when they become available.
If you have installed third-party software after you purchased your computer, regularly update the
software. Software companies provide software updates to their products to correct security problems
and improve functionality of the software.
Securing your wireless network
When you set up your wireless network, always enable security features. For more information, see
“Protecting your WLAN” in the Networking chapter.
54 Chapter 9 Securing your computer and information
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up your software applications and information
Regularly back up your software applications and information to protect them from being permanently
lost or damaged through a virus attack or a software or hardware failure. For more information, see
“Backup and recovery.”
Backing up your software applications and information 55
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Backup and recovery
Your computer includes tools provided by the operating system and HP to help you safeguard your
information and restore it if ever needed.
This chapter provides information on the following topics:
●
Creating a set of recovery discs or a recovery flash drive (HP Recovery Manager software
feature)
●
●
●
Performing a system restore (from the partition, recovery discs, or a recovery flash drive)
Backing up your information
Recovering a program or driver
56 Chapter 10 Backup and recovery
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring the system
If the computer hard drive fails, you must use a set of recovery discs or a recovery flash drive to
restore your system to its factory image. Ideally, you have already used HP Recovery Manager to
create these tools immediately after software setup.
NOTE: All references to the hard disk drive in this guide refer to the solid-state (SSD) drive
For issues other than hard drive failure, you can restore your system by using the HP Recovery
partition, rather than by using recovery discs or a recovery flash drive. To check for the presence of a
recovery partition, click Start, right-click Computer, click Manage, and then click Disk Management.
If the recovery partition is present, a Recovery drive is listed in the window.
CAUTION: HP Recovery Manager (partition or discs/flash drive) restores only software that was
preinstalled at the factory. Software not provided with this computer must be reinstalled manually.
Creating restore media
HP recommends that you create either a set of recovery discs or a recovery flash drive so that you
can restore your computer to its original factory state if the hard drive fails, or if for any reason you
cannot restore using the recovery partition tools. Create these discs or the flash drive after setting up
the computer for the first time.
NOTE: HP Recovery Manager allows the creation of only one set of recovery discs or one recovery
flash drive. Handle these recovery tools carefully, and keep them in a safe place.
NOTE: You can use an optional external optical drive (purchased separately) to create recovery
discs, or you can purchase recovery discs for your computer from the HP Web site. If you use an
external optical drive, it must be connected directly to a USB port on the computer, not to a USB port
on an external device, such as a USB hub.
Guidelines:
●
Purchase high-quality DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs.
NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE
(rewritable Blu-ray) discs, are not compatible with the HP Recovery Manager software.
●
●
The computer must be connected to AC power during this process.
Only one set of recovery discs or one recovery flash drive can be created per computer.
NOTE: If you are creating recovery discs, number each disc before inserting it into an optional
external optical drive (purchased separately).
●
If necessary, you can exit the program before you have finished creating the recovery discs or
recovery flash drive. The next time you open HP Recovery Manager, you will be prompted to
continue the backup creation process.
To create a set of recovery discs or a recovery flash drive:
1. Select Start > All Programs > Security and Protection > HP Recovery Manager > HP
Recovery Media Creation.
2. Follow the on-screen instructions.
Restoring the system 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing a system recovery
HP Recovery Manager software allows you to repair or restore the computer to its original factory
state. HP Recovery Manager works from recovery discs, a recovery flash drive, or from a dedicated
recovery partition on the hard drive.
NOTE: A system restore must be performed if the computer hard drive fails or if all attempts to
correct any functional computer issues fail. A system restore should be used as a final attempt to
correct computer issues.
Note the following when performing a system restore:
●
You can restore only the system that you have previously backed up. HP recommends that you
use HP Recovery Manager to create either a set of recovery discs or a recovery flash drive as
soon as you set up the computer.
●
●
Windows has its own built-in repair features, such as System Restore. If you have not already
tried these features, try them before using HP Recovery Manager to restore your system.
HP Recovery Manager restores only software that was installed at the factory. For software not
provided with this computer, you must either download the software from the manufacturer's
Web site or reinstall the software from the disc provided by the manufacturer using an optional
external optical drive (purchased separately).
Using the dedicated recovery partition
When using the dedicated recovery partition, there is an option to back up pictures, music and other
audio, videos and movies, recorded TV shows, documents, spreadsheets and presentations, e-mails,
Internet favorites and settings during this process.
To restore the computer from the recovery partition, follow these steps:
1. Access HP Recovery Manager in either of the following ways:
●
Select Start > All Programs > Security and Protection > HP Recovery Manager > HP
Recovery Manager.
– or –
●
Turn on or restart the computer, and then press esc while the “Press the ESC key for
Startup Menu” message is displayed at the bottom of the screen. Then, press f11 while the
“F11 (System Recovery)” message is displayed on the screen.
2. Click System Recovery in the HP Recovery Manager window.
3. Follow the on-screen instructions.
58 Chapter 10 Backup and recovery
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring using the restore media
1. If possible, back up all personal files.
2. Insert the first recovery disc into an optional external optical drive (purchased separately), and
then restart the computer.
– or –
Insert the recovery flash drive into a USB port on your computer, and then restart the computer.
NOTE: If the computer does not automatically restart in the HP Recovery Manager, the
computer boot order needs to be changed.
3. Press f9 at system bootup.
4. Select the external optical drive or the flash drive.
5. Follow the on-screen instructions.
Changing the computer boot order
To change the boot order for recovery discs:
1. Restart the computer.
2. Press esc while the computer is restarting, and then press f9 for boot options.
3. Select External CD/DVD ROM Drive from the boot options window.
To change the boot order for recovery flash drive:
1. Insert the flash drive into a USB port.
2. Restart the computer.
3. Press esc while the computer is restarting, and then press f9 for boot options.
4. Select the flash drive from the boot options window.
Backing up and recovering your information
It is very important to back up your files and keep any new software in a safe place. As you add new
software and data files, continue to create backups on a regular basis.
How completely you are able to recover your system depends on how recent your backup is.
NOTE: A recovery from your most recent backup needs to be performed if the computer has a virus
attack or if any major system components fail. In order to correct computer issues, a recovery should
first be attempted before a system restore is attempted.
Backing up and recovering your information 59
Download from Www.Somanuals.com. All Manuals Search And Download.
You can back up your information to an optional external hard drive, a network drive, or discs. Back
up your system at the following times:
●
At regularly scheduled times
TIP: Set reminders to back up your information periodically.
●
●
Before the computer is repaired or restored
Before you add or modify hardware or software
Guidelines:
●
Create system restore points using the Windows® System Restore feature, and periodically
copy them to an optical disc using an optional external optical drive (purchased separately) or an
external hard drive. For more information on using system restore points, refer to Using
●
●
Store personal files in the Documents library and back up this folder periodically.
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings. The screen shot can be a time-saver if you have to re-enter your preferences.
To create a screen shot:
1. Display the screen you want to save.
2. Copy the screen image:
To copy only the active window, press alt+prt sc.
To copy the entire screen, press prt sc.
3. Open a word-processing document, and then select Edit > Paste. The screen image is added to
the document.
4. Save and print the document.
Using Windows Backup and Restore
Guidelines:
●
●
Be sure that the computer is connected to AC power before you start the backup process.
Allow enough time to complete the backup process. Depending on file sizes, it may take over an
hour.
To create a backup:
1. Select Start > Control Panel > System and Security > Backup and Restore.
2. Follow the on-screen instructions to schedule and create a backup.
NOTE: Windows® includes the User Account Control feature to improve the security of the
computer. You may be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. Refer to Help and Support for more
information.
60 Chapter 10 Backup and recovery
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Windows system restore points
A system restore point allows you to save and name a snapshot of your hard drive at a specific point
in time. You can then recover back to that point if you want to reverse subsequent changes.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created
since the last restore point.
You also can create additional restore points to provide increased protection for your files and
settings.
When to create restore points
●
●
Before you add or modify software or hardware
Periodically, whenever the computer is functioning optimally
NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1. Select Start > Control Panel > System and Security > System.
2. In the left pane, click System Protection.
3. Click the System Protection tab.
4. Click Create, and then follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1. Select Start > Control Panel > System and Security > System.
2. In the left pane, click System Protection.
3. Click the System Protection tab.
4. Click System Restore.
5. Follow the on-screen instructions.
Backing up and recovering your information 61
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Setup Utility (BIOS) and System
Diagnostics
Using Setup Utility (BIOS)
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup
Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the
computer, and the amount of system and extended memory.
NOTE: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the
computer from operating properly.
Starting Setup Utility (BIOS)
To start Setup Utility (BIOS), follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2. Press f10 to enter Setup Utility (BIOS).
Changing the language of Setup Utility (BIOS)
1. Start Setup Utility (BIOS).
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Use the arrow keys to select a language, and then press enter.
4. When a confirmation prompt with your language selected is displayed, press enter.
5. To save your change and exit Setup Utility (BIOS), use the arrow keys to select Exit > Exit
Saving Changes, and then press enter.
Your change takes effect immediately.
62 Chapter 11 Setup Utility (BIOS) and System Diagnostics
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating and selecting in Setup Utility (BIOS)
To navigate and select in Setup Utility (BIOS), follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
●
To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press enter.
●
●
To scroll up and down, use the up arrow key or the down arrow key.
To close open dialog boxes and return to the main Setup Utility (BIOS) screen, press esc,
and then follow the on-screen instructions.
2. Press f10 to enter Setup Utility (BIOS).
To exit Setup Utility (BIOS) menus, choose one of the following methods:
●
To exit Setup Utility (BIOS) menus without saving your changes, press the esc key, and then
follow the on-screen instructions.
– or –
Use the arrow keys to select Exit > Exit Discarding Changes, and then press enter.
– or –
●
To save your changes and exit Setup Utility (BIOS) menus, press f10, and then follow the on-
screen instructions.
– or –
Use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
Your changes go into effect when the computer restarts.
Displaying system information
1. Start Setup Utility (BIOS).
2. Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3. To exit Setup Utility (BIOS) without changing any settings, use the arrow keys to select Exit >
Exit Discarding Changes, and then press enter.
Restoring factory settings in Setup Utility (BIOS)
NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Setup Utility (BIOS) to the values that were set at the factory, follow these
steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2. Press f10 to enter Setup Utility (BIOS).
Using Setup Utility (BIOS) 63
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use the arrow keys to select Exit > Load Setup Defaults. Press enter.
4. Follow the on-screen instructions.
5. To save your changes and exit, press f10, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
Your changes go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory
settings.
Exiting Setup Utility (BIOS)
●
●
To exit Setup Utility (BIOS) and save your changes from the current session:
If the Setup Utility (BIOS) menus are not visible, press esc to return to the menu display. Then
use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
To exit Setup Utility (BIOS) without saving your changes from the current session:
If the Setup Utility (BIOS) menus are not visible, press esc to return to the menu display. Then
use the arrow keys to select Exit > Exit Discarding Changes, and then press enter.
Updating the BIOS
Updated versions of the BIOS may be available on the HP Web site.
Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file.
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently
installed on the computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing
fn+esc (if you are already in Windows) or by using Setup Utility (BIOS).
1. Start Setup Utility (BIOS).
2. Use the arrow keys to select Main. Press enter.
3. To exit Setup Utility (BIOS) without saving your changes, use the tab key and the arrow keys to
select Exit > Exit Discarding Changes, and then press enter.
64 Chapter 11 Setup Utility (BIOS) and System Diagnostics
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading a BIOS update
CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download
and install a BIOS update only when the computer is connected to reliable external power using the
AC adapter. Do not download or install a BIOS update while the computer is running on battery
power, docked in an optional docking device, or connected to an optional power source. During the
download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep or Hibernation.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1. Select Start > Help and Support > Maintain.
2. Click Refresh.
3. Follow the on-screen instructions to identify your computer and access the BIOS update you
want to download.
4. At the download area, follow these steps:
a. Identify the BIOS update that is later than the BIOS version currently installed on your
computer. Make a note of the date, name, or other identifier. You may need this information
to locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
Make a note of the path to the location on your hard drive where the BIOS update is
downloaded. You will need to access this path when you are ready to install the update.
NOTE: If you connect your computer to a network, consult the network administrator before
installing any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the
download is complete. If no instructions are displayed, follow these steps:
1. Open Windows Explorer by selecting Start > Computer.
2. Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains
the update.
4. Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the
downloaded file from your hard drive.
Using Setup Utility (BIOS) 65
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup Menu
The tables in this section provide an overview of the BIOS Setup menu options.
Main menu
Select
To do this
System information
●
●
●
View and change the system time and date.
View identification information about your computer.
View specification information about the processor,
memory size, and system BIOS.
Security menu
Select
To do this
Administrator password
Control access to Setup Utility.
Control access to your computer.
Power-on password
TPM Status
Disable and deactivate or enable and activate (select models
only)
TPM Operation
Select no operation and TPM status (select models only)
Diagnostics menu
Select
To do this
Primary Hard Disk Self Test
Run a quick or comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.
Memory Test
66 Chapter 11 Setup Utility (BIOS) and System Diagnostics
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System Diagnostics
System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is
functioning properly. Depending on your computer, the following diagnostic tests may be available in
System Diagnostics:
●
●
●
Start-up test—This test analyzes the main computer components that are required to start the
computer.
Run-in test—This test repeats the start-up test and checks for intermittent problems that the
start-up test does not detect.
Hard disk test—This test analyzes the physical condition of the hard drive, and then checks all
data in every sector of the hard drive. If the test detects a damaged sector, it attempts to move
the data to a good sector.
●
Battery test—This test analyzes the condition of the battery. If the battery fails the test, contact
customer support to report the issue.
You can also view system information and error logs in the System Diagnostics window.
To start System Diagnostics:
1. Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is
displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed,
press f2.
2. Click the diagnostic test you want to run, and then follow the on-screen instructions.
NOTE: If you need to stop a diagnostics test while it is running, press esc.
Using System Diagnostics 67
Download from Www.Somanuals.com. All Manuals Search And Download.
A Troubleshooting and support
Troubleshooting
The computer is unable to start up
If the computer does not turn on when you press the power button, the following suggestions may
help you determine why the computer will not start up:
●
●
If the computer is plugged into an AC outlet, plug another electrical device into the outlet to be
sure that the outlet is providing adequate power.
NOTE: Use only the AC adapter provided with the computer or one approved by HP for this
computer.
If the computer is running on battery power or is plugged into an external power source other
than an AC outlet, plug the computer into an AC outlet using the AC adapter. Be sure that the
power cord and AC adapter connections are secure.
The computer screen is blank
If the screen is blank, but the computer is on and the power light is on, the computer may not be set
to display the image on the computer screen. To transfer the image to the computer screen, press the
f4 action key.
Software is functioning abnormally
If the software is unresponsive or responds abnormally, follow these suggestions:
●
Restart the computer by selecting Start > Shut down > Restart.
If you cannot restart the computer using this procedure, refer to the next section, The computer
●
Run a virus scan. For information about using the antivirus resources on the computer, refer to
68 Appendix A Troubleshooting and support
Download from Www.Somanuals.com. All Manuals Search And Download.
The computer is on but not responding
If the computer is on but is not responding to software or keyboard commands, try the following
emergency shutdown procedures in the sequence provided:
CAUTION: Emergency shutdown procedures result in the loss of unsaved information.
●
●
Press ctrl+alt+delete, and then click the Power button.
Press and hold the power button for at least 5 seconds.
The computer is unusually warm
It is normal for the computer to feel warm to the touch while it is in use. But if the computer feels
unusually warm, it may be overheating because a vent is blocked. If you suspect that the computer is
overheating, allow the computer to cool to room temperature. Then be sure to keep all vents free from
obstructions while you are using the computer.
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
NOTE: The fan in the computer starts up automatically to cool internal components and prevent
overheating. It is normal for the internal fan to cycle on and off during operation.
An external device is not working
Follow these suggestions if an external device does not function as expected:
●
●
●
●
●
Turn on the device according to the manufacturer’s instructions.
Be sure that all device connections are secure.
Be sure that the device is receiving electrical power.
Be sure that the device, especially if it is older, is compatible with the operating system.
Be sure that the correct drivers are installed and updated.
Troubleshooting 69
Download from Www.Somanuals.com. All Manuals Search And Download.
The wireless network connection is not working
If a wireless network connection is not working as expected, follow these suggestions:
●
Be sure that the wireless light on your computer is on (white). If the wireless light is off, press the
f12 action key to turn it on.
●
●
Be sure that the device wireless antennas are free from obstructions.
Be sure that the DSL or the cable modem and its power cord are properly connected and the
lights are on.
●
Be sure that the wireless router or access point is properly connected to its power adapter and
the DSL or cable modem, and that the lights are on.
●
Disconnect and then reconnect all cables, and turn the power off and then back on.
NOTE: For more information on wireless technology, refer to the relevant help topics and Web site
links in Help and Support.
70 Appendix A Troubleshooting and support
Download from Www.Somanuals.com. All Manuals Search And Download.
Contacting customer support
If the information provided in this user guide or in Help and Support does not address your questions,
you can contact customer support at:
NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to
At this location, you have the following choices:
●
Chat online with an HP technician.
NOTE: When technical support chat is not available in a particular language, it is available in
English.
●
●
●
E-mail customer support.
Find customer support worldwide telephone numbers.
Locate an HP service center.
Contacting customer support 71
Download from Www.Somanuals.com. All Manuals Search And Download.
B Cleaning your computer
Cleaning the display
Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be
sure that the display is dry before closing the display.
Cleaning the sides and cover
To clean and disinfect the sides and cover, use a soft microfiber cloth or a static-free cloth without oil
(such as a chamois) moistened with an alcohol-free glass cleaner or use an acceptable germicidal
disposable wipe.
NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and
debris.
Cleaning the TouchPad and keyboard
CAUTION: When cleaning the TouchPad and keyboard, do not let liquids drip between the keys.
This can permanently damage internal components.
●
●
To clean and disinfect the TouchPad and keyboard, use a soft microfiber cloth or a static-free
cloth without oil (such as a chamois) moistened with an alcohol-free glass cleaner or use an
acceptable germicidal disposable wipe.
To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a
can of compressed air with a straw extension.
WARNING! To reduce the risk of electric shock or damage to internal components, do not use
a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household
debris on the keyboard surface.
72 Appendix B Cleaning your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
C Traveling with the computer
For best results, follow these traveling and shipping tips:
●
Prepare the computer for traveling or shipping:
◦
◦
Back up your information.
Remove all discs and all external media cards, such as digital cards.
CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of
information, remove the media from a drive before rshipping, storing, or traveling with a
drive.
◦
◦
Turn off and then disconnect all external devices.
Shut down the computer.
●
●
Take along a backup of your information. Keep the backup separate from the computer.
When traveling by air, carry the computer as hand luggage; do not check it in with the rest of
your bags.
CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields
include airport walk-through devices and security wands. Airport conveyer belts and similar
security devices that check carry-on baggage use X-rays instead of magnetism and do not
damage drives.
●
●
●
In-flight computer use is at the discretion of the airline. If you plan to use the computer during a
flight, check with the airline in advance.
If you are shipping the computer, use suitable protective packaging and label the package
“FRAGILE.”
If the computer has a wireless device or an HP Mobile Broadband Module installed, such as an
802.11b/g device, a Global System for Mobile Communications (GSM) device, or a General
Packet Radio Service (GPRS) device, the use of these devices may be restricted in some
environments. Such restrictions may apply onboard aircraft, in hospitals, near explosives, and in
hazardous locations. If you are uncertain of the policy that applies to the use of a particular
device, ask for authorization to use it before you turn it on.
●
If you are traveling internationally, follow these suggestions:
◦
Check the computer-related customs regulations for each country or region on your
itinerary.
◦
Check the power cord and adapter requirements for each location in which you plan to use
the computer. Voltage, frequency, and plug configurations vary.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not
attempt to power the computer with a voltage converter kit sold for appliances.
74 Appendix C Traveling with the computer
Download from Www.Somanuals.com. All Manuals Search And Download.
E Electrostatic Discharge
Electrostatic discharge is the release of static electricity when two objects come into contact—for
example, the shock you receive when you walk across the carpet and touch a metal door knob.
A discharge of static electricity from fingers or other electrostatic conductors may damage electronic
components. To prevent damage to the computer, damage to a drive, or loss of information, observe
these precautions:
●
If removal or installation instructions direct you to unplug the computer, unplug it after being
properly grounded.
●
●
●
●
Keep components in their electrostatic-safe containers until you are ready to install them.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
Use nonmagnetic tools.
Before handling components, discharge static electricity by touching an unpainted metal surface
of the component.
If you need more information about static electricity or assistance with component removal or
installation, contact customer support.
76 Appendix E Electrostatic Discharge
Download from Www.Somanuals.com. All Manuals Search And Download.
F Specifications
Input power
The power information in this section may be helpful if you plan to travel internationally with the
computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The
AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered
from a standalone DC power source, it should be powered only with an AC adapter or a DC power
source supplied and approved by HP for use with this computer.
The computer can operate on DC power within the following specifications.
Input power
Rating
Operating voltage and current
18.5 V dc @ 3.5 A - 65 W
DC plug of external HP power supply
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not
exceeding 240 V rms.
NOTE: The computer operating voltage and current can be found on the system regulatory label.
Input power 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating environment
Factor
Metric
U.S.
Temperature
Operating
5°C to 35°C
41°F to 95°F
-4°F to 140°F
Nonoperating
-20°C to 60°C
Relative humidity (noncondensing)
Operating
10% to 90%
5% to 95%
10% to 90%
5% to 95%
Nonoperating
Maximum altitude (unpressurized)
Operating
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Nonoperating
78 Appendix F Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
updating 64
digital card
inserting 45
action keys
decrease screen brightness
buttons
removing 46
Digital Media Slot, identifying
identifying
left TouchPad
media 29
drive light
drives
volume 30
power
external 48
handling 49
hard 48
right TouchPad
volume 30
C
cables
USB 47
caps lock light, identifying
E
esc key, identifying
components
existing wireless network,
wireless 28
audio-in (microphone) jack,
bottom 12
F
display 10
identifying
audio-out (headphone) jack,
identifying
f11 58
left side
rear 11
right side
B
top
H
backing up
hard drive
external 48
HDMI
customized window, toolbar,
connecting to an existing wireless
network 17
battery
HDMI port, identifying
discharging 38
headphone (audio-out) jack
Hibernation
connector, power
exiting 35
battery light
initiating 35
hotkeys
BIOS
D
description 28
DC plug of external HP power
supply 77
Index 79
Download from Www.Somanuals.com. All Manuals Search And Download.
using 28
HP USB Ethernet Adapter,
connecting 21
caps lock
hard drive
power
battery 38
power button, identifying
power connector, identifying
mute
power
TouchPad
webcam 10
wireless
power lights, identifying
hubs 46
product name and number,
computer 13
protecting your wireless network
local area network (LAN)
I
icons
network 15
wireless 15
R
installing
integrated webcam light,
identifying 10
M
recovering from the dedicated
recovering from the recovery
discs 59
regulatory information
microphone (audio-in) jack,
identifying
Microsoft Certificate of Authenticity
label 13
mouse, external
J
mute light, identifying
RJ-45 (network) jack, identifying
jacks
audio-in (microphone)
audio-out (headphone)
N
network
S
RJ-45 (network)
network jack, identifying
setting password protection on
wakeup 35
Setup Utility (BIOS)
displaying system information
K
O
keys
operating system
action
Microsoft Certificate of
esc
fn
media 29
volume 30
Windows applications
optional external devices, using
Windows logo
exiting 64
shutdown 44
L
P
labels
Bluetooth 13
passwords
pointing devices, setting
preferences 22
ports
Microsoft Certificate of
Authenticity 13
regulatory 13
WLAN 13
Sleep
exiting 34
initiated during critical battery
level 39
initiating 34
HDMI
slots
lights
battery/AC
Digital Media
80 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
software
V
volume
adjusting 30
buttons 30
keys 30
W
T
webcam 31
TouchPad
webcam light, identifying
buttons
webcam, identifying
Windows applications key,
identifying
Windows logo key, identifying
using 22
TouchPad gestures
pinching 26
scrolling 26
wireless
zooming 26
TouchPad light
TouchPad on/off button
TouchPad zone, identifying
icons 15
protecting 19
wireless devices, turning on or
off 16
troubleshooting
computer is unable to start
up 68
wireless light
computer on but not
responding 69
wireless network (WLAN)
security 19
wireless network (WLAN),
software functioning
abnormally 68
wireless network connection
turning wireless devices on or off
Z
U
USB devices
connecting 47
description 46
removing 47
Index 81
Download from Www.Somanuals.com. All Manuals Search And Download.
|