GyroRemote
and Mobile
RF Keyboard
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications
Spec
GyroRemote
Keyboard
RF Receiver
System Require-
ments
T
T
Full functionality on IBM compatible PCs running Windows
2000, ME, XP or higher
Limited functionality on MAC OS 8.0 and higher and
Windows 98*
T
T
T
Available USB port
CD ROM drive (for GyroTools installation)
Microsoft or Mac compatible mouse driver
Size
7.75”L x 2”W x
1.5”H (19.7cm x
5.1cm x 3.8cm)
12.5”L x 6”W x 1”H
(32cm x 15cm x
4cm)
5”L x 4”W x 2”H
(13cm x 10cm x
5cm)
Weight
6 ounces (186g)
21 ounces (653g)
includes batteries
and keyboard cover
4 ounces (124g)
Operating
Range
Up to 100 feet (30.5m) typical with no
line-of-sight requirement**
N/A
N/A
N/A
Radio
49 MHz (U.S.) with 8 channels and 65,000
security addresses**
Batteries
4 AAA for up to 4
months of typical
presentation use
4 AAA for up to 6
months of typical
presentation use
Connector
N/A
N/A
USB with 5’ (1.5m)
cable
Operating Temp
Storage Temp
+10 to 40 C (+50 to +104 F)
-30 to +70 C (-86 to +158 F)
*GyroRemote: GyroTools software is Windows only. GyroRemote tool buttons not
supported by Macintosh. Cursor control and left mouse button fully functional on
Macintosh.
Keyboard: Internet and Multimedia hot keys not supported by Macintosh or
Windows 98. Standard keyboard keys are functional.
**See inside back cover for international specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. OPTIONAL: To exit “Learn Mode,” press the LEARN button on the
Receiver for 2 seconds. Otherwise, after five minutes, Learn Mode
will automatically time out.
If more than one Gyration remote and/or keyboard is being installed on the
system, place the Receiver into Learn Mode (step 4 above) only once, then
“Teach” each device before exiting Learn Mode. Do not push the Learn
button on the receiver for each device to be added. (Also see “Installing 3 or
More Devices” on page 13.)
When the Receiver is put into Learn Mode, it erases its memory of learned
devices and looks for new devices. Therefore, when adding a new device to a
system it is necessary to put the Receiver into Learn Mode then Teach all
devices that will be used on the system.
Note: After the Teach/Learn sequence is performed, the Receiver and the device will
remain synchronized after powering down and changing channels. It is only necessary
to perform the Teach/Learn sequence when setting a device up for the first time or
when adding additional devices to the system.
GyroTools Software
GyroTools software is a suite of professional presentation tools that enhance
the functionality of GyroRemote. Assign your favorite tools to buttons 1-4 on
GyroRemote and put advanced presentation techniques at your fingertips.
To install the GyroTools software, insert the GyroTools disk into your CD
drive and follow the on-screen instructions. Once GyroTools is installed, you
can view complete operating instructions by accessing the on-line help
documentation.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
To Determine Which Channel GyroRemote is Using
GyroRemote has eight individual channels available to it. To determine which
channel a device is currently using:
1. Press and quickly release the CHANNEL button on the GyroRemote
handset. Count the number of times the green LED light on the top
of the handset flashes. The number of flashes indicates the channel
the handset is using.
Note: If GyroRemote’s channel is changed when the computer is powered down or the
receiver is not connected, the devices will become unsynchronized. When the system is
running, click and release the channel button as described above to initiate a “channel
confirm” operation. GyroRemote broadcasts a message across all eight channels that
informs the receiver what channel it is currently operating on. The receiver then
automatically restores synchronization.
To Change the Channel GyroRemote is Using
When two devices are being used in the same proximity, each device should
be set to operate on a unique channel.
To change the channel:
1. Press and hold the CHANNEL button on the GyroRemote handset for
2 seconds. When you release the button, GyroRemote will change
to the next channel and the green LED will flash. The number of
times the green LED flashes indicates the new channel the handset
is using.
If a Teach/Learn sequence has already been performed, it will not be
necessary to re-synchronize the devices after a channel change.
Tip: If you are installing three or more devices on a single receiver, see “Installing 3 or
More Devices” on page 13.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using GyroRemote
GyroRemote provides great flexibility in how
you control your computer. GyroRemote has
no line-of-sight requirements. This means it’s
not necessary to point the device at the
computer, receiver, or TV screen. Find a
comfortable, relaxed position and move the
cursor with easy wrist movements.
The following instructions assume you have
already set up and synchronized GyroRemote
and the Receiver (see set up steps above).
1. Hold GyroRemote in a comfortable,
relaxed position with your index fin-
ger on the ACTIVATION TRIGGER and your thumb on the SELECT
buttons (see illustration above).
2. Press and hold the ACTIVATION TRIGGER with your index finger.
While holding the ACTIVATION TRIGGER, flex your wrist up, down,
sideways, in a manner similar to using a flashlight. The mouse cur-
sor tracks the motions of your hand.
Note: It is not necessary to point GyroRemote at the screen so be sure to
place your hand in a relaxed, comfortable position in your lap or by your side.
3. Use your thumb to press the left/right SELECT buttons. These
buttons serve the same functions as the left/right mouse button of
a standard computer mouse.
4. Double-click the ACTIVATION TRIGGER to keep the cursor continu-
ously active. To stop the cursor, click the ACTIVATION TRIGGER
once. Another way to keep the cursor continuously active is to click
the crescent shaped GYRO LOCK button.
GyroRemote uses standard Windows and Mac mouse drivers. Cursor tracking
speeds, mouse double-click speeds, and other options can be customized
using the Mouse Control Panel under Windows 98, 2000, ME, NT, XP or Mac
OS 8 and above (see operating system documentation for further informa-
tion about customizing mouse properties).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Off GyroRemote
After 3 minutes of non-use, GyroRemote enters a Sleep Mode that conserves
battery life. In Sleep Mode the unit only uses battery power when a button is
pushed. It is not necessary to power down the unit when it is idle unless the
unit will be traveling and may encounter inadvertent button presses.
1. To power down GyroRemote, simultaneously press and release the
CHANNEL button and TEACH button on the side of unit. GyroRemote
will immediately enter deep sleep mode and will be unresponsive to
button clicks. The unit will confirm it is powering off by flashing its
LED three times.
2. Repeat this sequence to power the unit back on. The unit will
confirm it is powering on by flashing its LED for 1 second.
Note: It may be necessary to power off the unit when traveling on commercial airlines
due to FCC regulations regarding radio-emitting devices.
Installing or Replacing the Batteries
GyroRemote operates on four standard or alkaline
AAA batteries. When GyroRemote’s batteries reach
20% of a full charge the Status LED will blink when
it normally lights solid. For instance, clicking and
holding a button on a fully charged remote causes
the Status LED to light solid. Clicking and holding a
button on a remote with low batteries will cause the
Status LED to blink intermittently. To replace the
batteries:
1. From the bottom of the remote, slide the
battery cover open by pushing firmly
downward with your thumbs.
2. Remove the battery holder.
3. Insert four new AAA batteries into battery cradle and return cradle
into GyroRemote. When replacing the cradle into the remote, align
the positive (+) labels. See Illustration for proper cradle alignment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Replace battery cover.
Four alkaline AAA batteries will generally provide up to six months of use in a
typical presentation environment.
Fine-tuning Cursor Control
GyroRemote uses your standard Windows mouse driver. Any settings that
are available to a standard desktop mouse are also available to GyroRemote.
Multiple factors will determine how you adjust your mouse to suit your
preference including screen resolution, mouse driver version and overall
personal preference.
While becoming familiar with your GyroRemote and getting a feel for the
GyroPoint method of cursor control, Gyration recommends adjusting your
mouse driver to the following settings:
T
Pointer Speed – Average. Some new users prefer this setting to be
slightly slower than average. Advanced users will increase the
speed so that less wrist movement gives them more screen
coverage with the cursor.
T
Acceleration – Low or Off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Gyration Mobile Keyboard
To Set Up and Synchronize the Keyboard with the
Receiver
1. Power on your computer and connect the Receiver USB cable into
an available USB port on your computer.
2. Follow standard USB device installation screens.
3. Insert 4 AAA batteries into the Keyboard.
4. Press and hold the LEARN button on the Receiver for 2 seconds. The
STATUS light will blink slowly, indicating that the receiver is in
“Learn Mode.”
5. Press the TEACH button on the Gyration keyboard (see illustration
above). The status light on the Receiver will blink rapidly for 4 sec-
onds, then will blink slowly. Push the “Teach” button on any addi-
nd
tional devices (i.e. GyroRemote or 2 Keyboard) at this time.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6. OPTIONAL: Press the LEARN button on the Receiver for 2 seconds
to exit “Learn Mode.” Otherwise, after five minutes, Learn Mode will
automatically time out.
If more than one device is being installed on the same system, place the
Receiver into Learn Mode (step 4 above) only once, then “Teach” each device
before exiting Learn Mode. Do not push the LEARN button on the receiver for
each device to be added. (See “Installing 3 or More Devices” on page 13.)
After the Teach/Learn sequence is performed, the receiver and the device
will remain synchronized after powering down and changing channels. It is
only necessary to perform the Teach/Learn sequence when setting a device
up for the first time or when adding additional devices to the system.
When the Receiver is put into Learn Mode, it erases its memory of previously
learned devices and looks for new devices. Therefore, when adding a new
device to a system it is necessary to put the Receiver into Learn Mode then
Teach all devices that will be used on the system.
To Determine Which Channel the Keyboard is Using
The Gyration Keyboard has eight individual channels available to it. To
determine which channel a device is currently using:
1. Press and quickly release the CHANNEL button on the keyboard.
Count the number of times the green LED light on the top of the
keyboard flashes. The number of flashes indicates the channel the
keyboard is using.
Note: If the keyboard’s channel is changed when the computer is powered down or the
receiver is not connected, the devices will become unsynchronized. When the system is
running, click and release the channel button as described above to initiate a “channel
confirm” operation. The keyboard broadcasts a message across all eight channels that
informs the receiver what channel it is currently operating on. The receiver then
automatically restores synchronization.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To Change the Channel the Keyboard is Using
When two devices are being used in the same proximity, each device should
be set to operate on a unique channel. To change the channel:
1. Click and hold the CHANNEL button on the RF Keyboard for 2
seconds. When you release the button, the keyboard will change to
the next channel and the green LED will flash. The number of times
the green LED flashes indicates the new channel the keyboard is
using.
If a Teach/Learn sequence has already been performed, it will not be
necessary to re-synchronize the devices.
Tip: If you are installing three or more devices on a single receiver, see “Installing 3 or
More Devices” on page 13.
Powering Off the Keyboard
It is not necessary to power down the keyboard when it is idle unless the unit
will be traveling and may encounter inadvertent key presses.
1. To power down the keyboard, simultaneously press and release the
CHANNEL button and TEACH button on the top of the keyboard. The
keyboard will immediately enter deep sleep mode and will be
unresponsive to key or button clicks. The unit will confirm it is
powering off by flashing its LED three times.
2. Repeat this sequence to power on the unit. The unit will confirm it is
powering on by flashing its LED for 1 second.
Note: If the keyboard’s protective cover is used, power down is not required. The cover
will prevent inadvertent key presses and the unit will remain in sleep mode with no
radio transmission.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Keyboard Media Keys
Key
OS
Support
Program
Support
Function
Win 2000,
ME, XP
Windows CD
Player, Default
Media Player
CD or Media player scans for
previously played track
Win 2000,
ME, XP
Windows CD
Player, Default
Media Player
Toggles player between Play
and Pause modes
Win 2000,
ME, XP
Windows CD
Player, Default
Media Player
CD or Media player scans for
next track on CD or music file
Win 2000,
ME, XP
Windows CD
Player, Default
Media Player
Puts player into Stop mode
Win 2000,
ME, XP
Windows sound
control
Decreases Windows volume
setting
Win 2000,
ME, XP
Windows sound
control
Increases Windows volume
setting
Win 2000,
ME, XP
Windows sound
control
Mutes Windows sound
volume
Win 2000,
ME, XP
Microsoft
Internet Explorer
Loads the last page you
viewed in the browser
window
Win 2000,
ME, XP
Microsoft
Internet Explorer
Re-loads a page you viewed
before clicking the Back
button
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Keyboard Media Keys (Continued)
Key
OS
Support
Program
Support
Function
Win 2000,
ME, XP
Microsoft
Internet Explorer
Stops the loading process in
the browser window
Win 2000,
ME, XP
Microsoft
Internet Explorer
Re-loads the currently
displayed page in the
browser window
Win 2000,
ME, XP
Microsoft
Internet Explorer
Launches Brower (if closed)
and loads your Home page in
the browser window
Win 2000,
ME, XP
Microsoft
Internet Explorer
Opens the Search frame in
the browser window or, if
closed, launches Windows
search
Win 2000,
ME, XP
Microsoft
Internet Explorer
Opens the Favorites frame in
the browser window
Win 2000,
ME, XP
Default e-mail
client
Launches your default e-mail
client
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Gyration RF Receiver
Learn Button
Pressing the LEARN button for 2 seconds puts the receiver into “Learn Mode”
allowing you to synchronize one or more devices with the receiver. After
devices have been synchronized, pressing the LEARN button again for 2
seconds takes the receiver out of Learn mode. If the receiver is not manually
taken out of Learn Mode, it will automatically return to Normal Mode after
five minutes.
Status LED
The Status LED displays useful information about modes of operation and the
connection between receiver and transmitter(s).
T
The Status LED remains off when the receiver is operating in
“Normal Mode” and no devices are transmitting.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
T
The Status LED flickers rapidly when the receiver is operating in
“Normal Mode” and a synchronized device is transmitting. If there is
radio interference, the flickering light will be inconsistent.
T
T
The Status LED blinks slowly (1 blink per second) when the receiver
is in Learn Mode and is awaiting a Teach instruction from a device.
The Status LED blinks rapidly for a 4-second burst when it is in
Learn Mode and processing a Teach instruction and synchronizing
the receiver with the device.
Keyboard Status LEDs
The Keyboard Status LEDs indicate whether the keyboard has the Num Lock,
Caps Lock and/or Scroll Lock features activated.
Conflict LED
If an unrecognized Gyration device is attempting to operate on the same
channel as a device that has been synchronized, the red “Conflict” LED on
the receiver will flicker and input control may be intermittent.
The Conflict Light will only detect interference from another RF device (i.e.
not cordless phones, personal radios, etc.).
Installing 3 or More Devices
The Receiver can be taught to recognize up to eight devices (remotes, key-
boards, etc.) on a system, but only two of those devices may be used simul-
taneously. When setting up a system with a single receiver and 3 or more
devices, the following guidelines must be followed:
T
Select two channels that are free of outside interference and install
all devices on either of those two channels. When possible, it is
recommended that the two chosen channels be separated by at
least one unused channel.
T
Any of the devices installed on one channel may be used
13
Download from Www.Somanuals.com. All Manuals Search And Download.
simultaneously with any of the devices on the other channel. Two
devices that share a channel may not be used simultaneously.
When installing the devices try to determine which devices will be
used simultaneously and set them on opposite channels.
The following example describes a single-receiver system with two remotes
and a keyboard that requires one remote to be used by a presenter for
cursor control while another presenter inputs data on the keyboard. Remote
#1 is set to channel 3 and the keyboard and remote #2 are set to channel 5.
With this configuration, remote #1 and the keyboard can be used
simultaneously, but remote #2 and the keyboard cannot.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
GyroRemote Troubleshooting Tips
Symptom
Reason
Solution
GyroRemote LED
comes on when
Remote and Receiver
not Synchronized
Perform a Teach/Learn sequence.
(See “GyroRemote” on page 1.)
activate button is
pressed, but receiver
is unresponsive
Cursor is visible but
shows no movement
Gyro not activated
Radio Interference
Squeeze the trigger, double-click
trigger or press crescent shaped
Gyro Lock button on top of
GyroRemote.
Cursor movement is
choppy or erratic
1. Change the device’s channel
setting. (See “To Change the
Channel GyroRemote is Using”
on page 3.)
2. Move receiver away from
other electronic devices (e.g.
monitor, speakers, radio,
etc.).
When pressing the
activate button, the
LED on the
Batteries are low
Batteries are dead
GyroRemote is flashing
Replace batteries (see page 5).
When pressing the
activate button, the
LED on the
GyroRemote is off
Cursor moves too fast
or too slow
Speed or
acceleration not set
properly
Change the cursor tracking speed
in the mouse control panel (see OS
documentation for details).
When keyboard is in
use, the GyroRemote
stops working
The GyroRemote and
Keyboard channels
are too close to each
other
Find out what channel each device
is on (See “GyroTools Software” on
page 2 and “To Determine Which
Channel the Keyboard is Using” on
page 8), then change the channels
on the GyroRemote device to a
channel at least 2 away from the
keyboard channel.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Troubleshooting Tips
Symptom
Reason
Solution
Keyboard and
Receiver not
Synchronized
Perform a Teach/Learn sequence
(see page 7).
Radio interference
1. Change the device’s channel
setting (See “To Change the
Channel the Keyboard is
Using” on page 9).
Computer does not
recognize data input
2. Move receiver away from
other electronic devices (e.g.
monitor, speakers, radio,
etc.).
Dead batteries
Replace batteries.
Keystrokes are not
consistently
recognized
Radio interference
1. Change the device’s channel
setting.
2. Move receiver away from
other electronic devices (e.g.
monitor, speakers, radio,
etc.).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
REGULATORY INFORMATION
ATTENTION! THIS DEVICE EMITS RADIO FREQUENCIES AND HAS NOT BEEN
CERTIFIED BY THE FAA FOR USE ONBOARD AIRCRAFT. DO NOT USE THIS
DEVICE AT ANY TIME ONBOARD CIVIL AIRCRAFT. TO MINIMIZE THE
POSSIBILITY OF INTERFERENCE, POWER OFF GYROREMOTE TO ENSURE
THAT GYROREMOTE REMAINS OFF DURING FLIGHT.
FCC Statement
The GyroRemote, Keyboard and Receiver have been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and radiates radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna (television, radio, etc.).
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
additional help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. Contact Gyration, Inc., 12930 Saratoga Avenue, Bldg. C,
Saratoga CA 95070. Technical Support tel: 408 973-7086. These devices
comply with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
1. these devices may not cause harmful interference, and
2. these devices must accept any interference received, including
interference that may cause undesired operation.
The GyroRemote and Keyboard operate in the frequency band of 49.82 to
49.9 MHz with RF output power of less than 30 MicroWatts EIRP (Effective
Isotropic Radiated Power).
Warning: Using these products in any way other than as described in this
manual or altering the antenna in any way may violate FCC rules.
FCC ID: JJ4-GP241-001 (GyroRemote), JJ4-GP221-001 (Mobile Keyboard)
Receiver: AS00216-001
Canadian Radio Interference Regulations
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations. Cet appareil numérique de la
classe B respecte toutes les exigences du Règelement sur le matériel brouil-
leur du Canada.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Contacting Gyration
If you have any questions on your new Gyration product, please use any of
the phone/FAX numbers or addresses below:
Main Office
Gyration, Inc.
12930 Saratoga Avenue, Bldg. C
Saratoga, CA 95070
USA
Phone: 408-255-3016
Fax: 408-255-9075
Sales
Phone: 800-316-5432 (Toll-free in US and Canada)
Fax: 408-351-4433
E-mail: [email protected]
Technical Support
Phone: 408-973-7086
E-mail: [email protected]
World Wide Web
Warranty Information
Gyration products come with a one-year hardware warranty. Gyration, Inc.,
(Gyration) warrants products against defects in material and workmanship
for a period of one year from the date of purchase from Gyration or an
authorized Gyration agent. This warranty applies only to the original
purchaser and is not transferable. This warranty does not cover any
incompatibilities due to the user's computer, hardware, software or any
other related system configuration in which the product interfaces. Proof of
purchase will be required before any warranty consideration by Gyration
occurs. This warranty does not cover any damage caused by negligence,
non-authorized modifications, or parts installed without prior written
19
Download from Www.Somanuals.com. All Manuals Search And Download.
permission from Gyration. This warranty does not apply if the product has
been damaged by accident, abuse, misuse, or misapplication, nor as a result
of service to the product by anyone other than by Gyration.
Gyration is not responsible for any lost profits, lost savings or other
incidental or consequential damages arising out of the use of, or
inability to use, this product. This includes damage to property and,
to the extent permitted by law, damages for personal injury. This
warranty is in lieu of all other warranties including implied
warranties of merchantability and fitness for a particular purpose.
Some states do not allow limitation of implied warranties, or exclusion or
limitation of incidental or consequential damages, so the above limitations
may not apply to you. This warranty gives you specific legal rights. You may
have other rights which may vary from state to state. This warranty applies
only to these products, and is governed by the laws of the State of California.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
International Radio Compatibility
United States, Brazil, Canada, Israel
CHANNELS
FREQUENCY
RANGE
8
49mhz
100 ft. (30.5 m)
Australia, European Union, Czech Republic, Hong Kong, Hungary, Malaysia,
Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland,
Thailand
CHANNELS
FREQUENCY
RANGE
4
40mhz
30.5 m (100 ft.)
Japan, South Korea
CHANNELS
FREQUENCY
RANGE
8
49mhz
7.6 m (25 ft.)
China, Taiwan
CHANNELS
4
FREQUENCY
RANGE
40mhz
7.6 m (25 ft.)
Download from Www.Somanuals.com. All Manuals Search And Download.
GyroRemote & RF Keyboard
User Manual
PA00169-001 Rev. C
Gyration, Inc.
12930 Saratoga Avenue, Bldg. C
Saratoga, CA 95070
1.800.316.5432
Download from Www.Somanuals.com. All Manuals Search And Download.
|