HT119B
DVD Player
Ta B l e o f C o n T e n T s
Warnings and Precautions.......................................................2
Important safety Instructions..................................................3
In the Box & features.............................................................4
Powering the Unit ...................................................................5
Changing the Remote Battery.................................................5
Connecting the speaker system/DVD Player.........................6
Connecting the speaker system/DVD Player.........................7
Composite Video output & s-Video output ..........................8
Component Video output & Coaxial audio output...............9
Programming a DVD or CD .................................................10
setup Menu...........................................................................11
locations of Controls & Definitions............................... 12-19
Parts & service Information .................................................20
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
1
12/17/2008 3:21:06 PM
Important safety Instructions
1. Read Instructions - all the safety and operating
instruction should be read before the product is
operated.
your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation.
13. Power-Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and point where
they exit from the product.
2. Retain Instructions - The safety and operating
instruction should be retained for future reference.
e) If the product has been dropped or damaged in
any way, and
3. Heed Warnings - all warning on the product and
in the operating instructions should be adhered to.
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
4. Follow instructions - all operating and use
instructions should be followed.
14. Protective Attachment Plug - The product is
equipped with an attachment plug having overload
protection. This is a safety feature. see Instruction
Manual for replacement or resetting of protective
device. If replacement of the plug is required, be
sure the service technician has used a replacement
plug specified by the manufacturer that has the
same overload protection as the original plug.
22. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer
or have the same characteristics as the original
part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
5. Cleaning - Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Clean only with a dry cloth.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
23. Safety Check - Upon completion of any service or
repairs to this product, ask the service technician
to perform safety checks to determine that the
product is in proper operating condition.
15. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide some
protection against voltage surges and built-up static
charges. article 810 of the national electrical
Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and
supporting structure, grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna-discharge unit, size of grounding
conductors, location of antenna-discharge
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the like.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on apparatus.
24. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
25. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat. Battery shall not be exposed to
excessive heat such as sunshine, fire, or the like.
L’appareil ne doit pas être exposê aux écoulements
ou aux éclaboussures et aucun objet ne contenant
de liquide, tel qu’un vase, ne doit être placé sur
l’objet.
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
8. Accessories - Do not place this product on an
unstable cart, stand tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
Les piles ne doivent pas être exposées à de forte
chaleur, tel qu’à la lumière du soleil, au feu ou
autres choses de semblable.
See figure:
26. Main plug is used as disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from
the mains completely, the mains plug should
be disconnected from the mains socket outlet
completely.
La prise du secteur ne doit pas être obstruée
ou doit être facilement accessible pendant son
utilisation. Pour être complètement déconnecté
de l’alimentation d’entrée, la prise doit être
débranchée du secteur.
9. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
16. Lightning - for added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the product due to lightning and power-line
surges.
27. excessive sound pressure from earphones and
headphones can cause hearing loss.
See figure:
Des pressions acoustiques excessives provenant
d’écouteurs ou de casques peuvent provoquer des
pertes de l’audition.
17. Power Lines - an outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
28. To prevent fire or shock hazard, do not use this
plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to
prevent blade exposure.
10. Ventilation - slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instruction have been adhered to.
29.
symbol is used to indicate that a
specific component shall be replaced
only by the component specified in that
documentation for safety reasons.
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
30.
This symbol indicates that this product
incorporates double insulation.
19. Object and Liquid Entry - never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
never spill liquid of any kind on the product.
11. Power Sources - This product should be operated
only from the type of power source indicated on
the marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company. for products
intended to operate from battery power, or other
sources, refer to the operating instruction.
31. Caution marking is located at the rear of apparatus.
Les précautions d’emploi sont inscrites en bas de
l’appareil.
20. Servicing - Do not attempt to service this product
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
32. The marking information is located at the rear of
apparatus.
12. Grounding or Polarization - This product may
be equipped with a polarized alternating-current
line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarizes plug.
Les marquages sont inscrits en bas de l’appareil.
21. Damage Requiring Service - Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is
damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
Alternate Warnings - This product is equipped
with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only
fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace
c) If the product has been exposed to rain, water
or moisture.
d) If the product does not operate normally by
following the operating instructions. adjust only
3
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
3
12/17/2008 3:21:07 PM
In the Box
• HT119B
• Remote Control
• speaker Connection Cables
• a/V RCa Cables
• Documentation
features
--Audio Out Jacks, L&R
--s-Video output Jack
--Coaxial Digital audio output
speaker:
2.1 Channel Speaker System
full-Range stereo speakers
subwoofer
--Rotary Bass and Volume Controls
--DVD/aUX source selector Button
--Audio-In L&R Jack, RCA type
--Stereo Line-In Jack for other Audio Players,
Drawer-Load DVD Player
3.5mm type
Plays DVD, DVD-R/RW, DVD+R/RW, CD, CD-
--Aux-In Jack for other Audio Players, L&R RCA
R/RW
type
Plays JPeG Picture Discs
Full-Feature Remote Control for DVD
Multi-language osD: on-screen Display in
Uses 2-”AAA” Batteries, (not included)
English, French & Spanish
supports Multiple languages and language
subTitles
AC-Powered:
DVD: 120V, Built-In AC Cord
subWoofer: Built-In 120V aC Cord
fast-forward / fast-Backward / slow Motion /
Zoom
TV Display aspect Ratio Conversion: 4:3 / 16:9
nTsC
Progressive scan
Jacks
DVD Player:
--Video Out Jack, RCA type
--Progressive scan output
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
4
12/17/2008 3:21:07 PM
Powering the Unit
To power the unit, plug the attached AC cord into a standard AC outlet (120V~60Hz)
Changing the Remote Battery
To power the remote battery, insert two AAA batteries into the battery compartment on
the back of the remote.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
5
12/17/2008 3:21:08 PM
Connecting the speaker system/DVD Player
Connect the external speakers to the
subwoofer using the speaker cables.
Connect the DVD Player to the
subwoofer using the included a/V Cable.
•
When connecting the included
A/V Cable, match the colored
connections with the colored ports
(White to white, red to red, and
yellow to yellow).
external speaker
Connect the Video Connection to a
television or other display.
DVD Player
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
6
12/17/2008 3:21:08 PM
Connecting the speaker system/DVD Player
subwoofer
Video
Connection
A U DIO I
N
S
P E A K
E
R
DVD AUX
R
L
R
L
R
L
external speaker
MODEL: HT119BS
POWER SOURCE: 120V
~
60Hz 30W
*
*
SUBWOOFER: 4”
IMPEDANCE: OHM
8
GPX,
a
brand of DPI, Inc. 2116 Carr Street, St. Louis,
MO 63106 USA
MADE IN CHINA
ON
OFF
120V
0Hz
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
7
12/17/2008 3:21:09 PM
Composite Video output
When connecting two products using an RCA Cable, match the colored ports with the
same colored connection. (Red to Red, White to White, and Yellow to Yellow)
Step 1: Connect the RCa Cable to the Audio Outputs and Composite Video
Output on the unit to the audio/video inputs on the Television
Step 2: Turn the unit on by pressing the Power Button.
Step 3: Change the television to the correct audio/video input setting.
Step 4: Change the Video Output setting on the unit to YUV.
Step 5: audio and video played through the unit will now be seen and heard on
the connected television.
• Press the Video button on the remote control to cycle through S-Video,
YUV, and P-Scan.
s-Video output
When connecting two products using an RCA Cable, match the colored ports with the
same colored connection. (Red to Red, White to White, and Yellow to Yellow)
Step 1: Connect an S-Video Cable (not included) to the S-Video Output on the
unit and the s-Video Input on the Television.
Step 2: Connect the RCa Cable to the Audio Outputs on the unit to the audio/
video inputs on the Television.
Step 3: Turn the unit on by pressing the Power Button.
Step 4: Change the Video Output setting on the unit to s-Video.
Step 5: Change the television to the correct audio/video input setting.
Step 6: Video played through the unit will now be seen on the Television.
• Press the Video button on the remote control to cycle through S-Video,
YUV, and P-Scan.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
8
12/17/2008 3:21:09 PM
Component Video output
When connecting two products using an Component Cable, match the colored ports
with the same colored connection. (Green to Green, Red to Red, and Blue to Blue)
Step 1: Connect a Component Cable (not included) to the Component Video
Outputs on the unit and the component video inputs on the Television
Step 2: Connect the RCa Cable to the Audio Outputs on the unit to the audio/
video inputs on the Television.
Step 3: Turn the unit on by pressing the Power Button.
Step 4: Change the Video Output setting on the unit to YUV P-Scan.
Step 5: Change the television to the correct video input setting.
Step 6: Video played through the unit will now be seen on the connected
television.
• Press the Video button on the remote control to cycle through S-Video,
YUV, and P-Scan.
Coaxial audio output
When connecting two products using an RCA Cable, match the colored ports with the
same colored connection. (Red to Red, White to White, and Yellow to Yellow)
Step 1: Connect an RCA Cable (included) to the Coaxial Audio Output on the
unit and the coaxial audio input on a surround sound system.
Step 2: Turn the unit on by pressing the Power Button.
Step 3: Change the stereo system to the correct audio input setting.
Step 4: audio played through the unit will now be heard on the connected
television or stereo system.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd
9
12/17/2008 3:21:09 PM
Programming a DVD or CD
Step 1: Press the Power Button to turn the unit on. The Power Indicator will
illuminate green when the unit is turned on.
Step 2: Insert a DVD or CD into the CD/DVD Drawer.
Step 3: After the CD/DVD loads, press the PROG Button on the remote.
Step 4: For DVD, in the column with “Title”, select the title number. In the
column with “Chapter”, select the chapter number.
• For CD, in the column with “Track”, select the track numbers in the
order they are to be played.
Step 5: After all of the desired titles and chapters, or tracks are programmed,
press the Play Button to begin playing the programmed tracks.
Step 6: To cancel a program, press the Stop Button twice.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 10
12/17/2008 3:21:09 PM
setup Menu
To enter the setup menu, press the Setup Button on the remote control.
•
To access all of the features in the setup menu, the unit must be in full stop mode. (Press the Stop Button
twice to enter full stop mode)
Language Setup
OSD
select to adjust the on-screen Display language.
Menu
select to adjust the Menu language.
Audio
select to adjust the audio language.
Subtitle
select to adjust the subtitle language.
Screen Setup
TV Type
Select to adjust the aspect ratio of the DVD player to 4:3PS, 4:3LB, or 16:9.
Screen Saver
select to turn the screen saver off or on.
TV System
Select to adjust the TV System to NTSC, PAL, or Auto.
Video Output
Select to adjust the Video Output to CVBS+S-Video, CVBS+YUV, or YUV P-Scan.
Audio Setup
Digital Out
Select to adjust the Digital Output to SPDIF/PCM, SPDIF/RAW, or Off.
Down Mix
select to adjust the Down Mix to lo/Ro or lt/Rt.
Custom Setup
Angle Mark
select to turn the angle Mark on or off.
Default
select to restore the unit to it’s original settings.
Style
select to adjust the color style of the setup menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 11
12/17/2008 3:21:09 PM
locations of Controls
7
8
9
1
POWER
10
11
12
2
3
13
4
5
6
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 12
12/17/2008 3:21:09 PM
Control Definitions
1.
CD/DVD Drawer
Use the CD/DVD Drawer to load DVD, CD, and CD-R/RW discs.
2.
Composite Video Output
Use the Video Output connection to send a composite video signal from the unit to a TV. (Requires
an RCA Cable, included)
3.
Component Video Output
Connect the Component Outputs to send the best video signal from the unit to a TV. (Requires a
Component Cable, not included)
• The Component Outputs must be connected to activate the progressive scan feature.
4.
5.
Audio Output
Use the aUDIo oUT port to connect the unit to the included speaker system.
Coaxial Output
The CoaXIal output is an advanced audio output which allows the digital audio signal to be sent
to a surround sound receiver for multichannel and surround sound audio.
6.
S-Video Output
Use the s-Video output connection to send a higher quality standard video signal to the TV.
(Requires an S-Video cable, not included)
7.
Open/Close Button
Press the open/Close Button to open or close the CD/DVD Drawer
8.
Play/Pause Button
Press the Play/Pause Button to play or pause a CD or DVD.
9.
Stop Button
Press the stop Button to stop a DVD or CD during play.
10.
11.
Power Button
Press the Power Button to turn the unit off and on.
Power Indicator
The Power Indicator illuminates red when the unit is turned off. The Power Indicator illuminates
green when the unit is turned on.
12.
13.
Infrared Receiver
The Infrared Receiver receives signals sent from the remote control.
AC Cord
Plug the attached AC Cord into a standard AC outlet (120V~60Hz) to power the unit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 13
12/17/2008 3:21:09 PM
locations of Controls
14
A U DIO I N
S P E A K E R
DVD
AUX
R
L
R
L
R
15
21
L
MODEL: HT119BS
POWER SOURCE: 120V ~ 60Hz 30W
* SUBWOOFER: 4”
* IMPEDANCE: 8 OHM
GPX,
a
brand of DPI, Inc. 2116 Carr Street, St. Louis,
MO 63106 USA
MADE IN CHINA
POWER
ON
16
OFF
120V
60Hz
17
18
DVD
19
20
AUX/LINE IN
LINE IN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 14
12/17/2008 3:21:11 PM
Control Definitions
14.
Auxiliary Input
Use the auxiliary Input to connect an external audio source to the unit’s speaker system.
Please note, when the Line Input is connected to the unit, the Auxiliary Input will be deactivated.
15.
16.
17.
18.
19.
DVD Audio Input
Use the DVD audio Input to connect the DVD player to the speaker system.
Power Switch
Press the Power switch to turn the speaker system on or off.
Volume Dial
Turn the Voluame Dial to adjust the volume of audio output from the speaker system.
Bass Dial
Turn the Bass Dial to adjust the level of bass output from the speaker system.
Source Button
Press the source Button to switch between DVD Player Mode and Auxiliary Mode.
Please note, when the Line Input is connected to the unit, the Auxiliary Input will be deactivated.
20.
21.
Line Input
Use the Line Input to connect an external audio source, such as an MP3 player, to the unit’s speaker
system.
Please note, when the Line Input is connected to the unit, the Auxiliary Input will be deactivated.
Speaker Connections
Use the speaker Connections to connect the unit’s speakers to the subwoofer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 15
12/17/2008 3:21:11 PM
locations of Controls
22
35
23
24
25
26
27
28
29
30
31
32
33
34
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 16
12/17/2008 3:21:11 PM
Control Definitions
22.
Step Button
Press the STEP button to pause a DVD movie, and press it consecutively after the movie is paused to
move forwards through the movie one frame at a time.
23.
24.
Power Button
Press the Power Button to turn the unit off and on.
GOTO Button
Press the GOTO Button to quickly switch between DVD chapters, or enter a time and instantly go to
the selected time of a DVD.
25.
26.
Number Keypad
Use the number Keypad when programming a CD or DVD.
Repeat Button
Press the Repeat Button to switch between Repeat Chapter, and Repeat Title on a DVD, or Repeat
Track, and Repeat All for a CD or JPEG CD.
27.
28.
Angle Button
The angle Button works with special DVDs to adjust to alternate angles while watching.
Video Button
Press the Video Button to switch between S-Video, YUV (Composite Video Output), or P-Scan
(Component Video Outputs).
29.
30.
Setup Button
Press the setup Button to display the DVD Player’s setup menu.
Navigation Controls / Enter Button
The Navigation buttons (Up, Down, Right, Left) and the ENTER button are used for navigating the
DVD Player’s internal menus and the DVD movie menus.
31.
32.
33.
Stop Button
Press the stop Button to stop a DVD or CD during play.
N/P
Press the n/P Button to switch between nTsC and Pal TV modes.
Wide Button
Press the Wide Button to switch the Aspect Ratio between 4:3 Pan Scan, 4:3 Letter Box, Screenfit or
Zoomfit.
• The WIDE button will only work when the unit is in stop mode.
34.
35.
PREV/NEXT Buttons
Press the PReV/neXT Buttons to skip to the previous or next track or chapter on a CD or DVD.
PROG Button
Press the PROG (Program) Button to set a play order for a DVD’s chapters or a CD’s tracks.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 17
12/17/2008 3:21:11 PM
locations of Controls
36
37
38
39
40
41
42
43
44
45
46
47
48
49
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 18
12/17/2008 3:21:12 PM
Control Definitions
36.
37.
38.
39.
Open/Close Button
Press the open/Close Button to open or close the CD/DVD Drawer
Mute Button
Press the Mute Button to mute the audio output from the unit.
Audio Button
Press the audio Button to adjust the DVD’s audio language.
Subtitle Button
Press the Subtitle Button to turn the subtitles on or off, and to adjust between different subtitle
languages.
40.
41.
Zoom Button
Press the Zoom Button consecutively to turn the zoom feature on and off.
OSD Button
Press the OSD (On Screen Display) Button to show the Time, Title, Chapter, Audio Language, Subtitle
Setting, and Angle settings of a DVD.
42.
A-B Button
Press the a-B Button once to mark a starting point during a DVD. Press the button a second time to
mark an ending point. after doing so the DVD will loop that section of video. Press the button a third
time to cancel this function.
43.
44.
45.
46.
47.
48.
49.
Menu Button
Press the Menu Button to see the menu of the DVD disc in the player.
SLOW
Press the sloW button to activate and deactivate the slow Motion feature while playing a DVD.
L/R Button
Press the L/R button to switch the audio output between the left speaker, right speaker, or all speakers.
Play Button
Press the Play Button to play a load CD or DVD.
Pause Button
Press the Pause Button to pause a CD or DVD during play.
Title Button
Press the Title Button to see the Title Menu on a DVD.
F.BWD/F.FWD Button
Press the F.FWD Button to skip to the next chapter, track, or image on a DVD, CD, or JPEG CD. Press
and hold the f. fWD Button to fast-forward through an individual chapter or track on a DVD or CD.
Press the F.BWD Button to skip to the previous chapter, track, or image on a DVD, CD, or JPEG CD.
Press and hold the f.BWD button to search backwards through an individual chapter or track on a
DVD or CD.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 19
12/17/2008 3:21:12 PM
Parts Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: partsinfo@dpi-global.com
service Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: prodinfo@gpx.com
Version: v. 121208
To download this Instruction Manual in English, Spanish, or French visit the Support
Para descargar este manual de instrucción en inglés, español, o francés visite la sección
Pour télécharger ce manuel d’instruction en anglais, espagnol, ou le Français visitez la
© 2008 Digital Products International (DPI, Inc.)
all other trademarks appearing herein are the property of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
HT119B-IB.indd 20
12/17/2008 3:21:12 PM
|